Rosemount 1199 Submersible Seal

Transcription

1 Product Data Sheet July , Rev AA The Rosemount Submersible Seal design uses innovative DP level technology to measure level for top-down applications. For this design, the seal and capillary are submersed in the process and installation is made through a connection at the top of the tank. This differs from traditional DP Level installations which are side mounted to tanks via threaded, flanged or hygienic connections, with only the diaphragm seal in contact with the process. The unique design of the Submersible Seal allows installation through small tank connections while at the same time providing excellent performance and sensitivity characteristics.

2 July 2013 Proven, Reliable, and Innovative Remote Seal Technology for Top Down Measurement Unlike traditional DP Level systems that use flat diaphragm seals to measure process pressure, the Submersible Seal consists of a compressed bellows design. This design allows the seal to fit through small tank connections, a 1 1 /2 NPT threaded connection or a 2 to 3 inch flanged connection (DN 50 to DN 100), and be submersed into the fluid to provide a top-down level measurement. In addition, this seal design provides significantly better performance compared to a similar sized traditional DP Level diaphragm seal. The can be combined with any Rosemount In-Line Gage Transmitter including all output protocols and hazardous location approvals. Based on reliable and easy to use pressure based level technology Ideal for smaller top-down tank connections, from 1 1 /2 NPT threaded connections to 2-3 inch flanged connections (DN 50 to DN 100). Intended for Vented or Open Tank Applications Assemble to any Rosemount In-Line Gage Transmitter Rosemount 3051S_T 4-20 ma HART, WirelessHART, FOUNDATION fieldbus, Profibus Rosemount 3051T 4-20 ma HART, WirelessHART, FOUNDATION fieldbus, Profibus Rosemount ma HART, WirelessHART, FOUNDATION fieldbus, Profibus Rosemount 2088 Submersible Seal System with Wireless Rosemount 3051T 4-20 ma HART Contents Ordering information Specifications Dimensional drawings

3 July 2013 Ordering information The can be ordered with any Rosemount In-Line Transmitter with the 1199 attach to option. Please refer to the desired Rosemount transmitter PDS for the desired configuration. Ordering Codes Transmitter Model 3051S_TG 3051TG, 2051TG, 2088G 1 Seal B11 S1 Table 1. The offering represents the most common options. The starred options ( ) should be selected for best delivery. The Expanded offering is subject to additional delivery lead time. Model Product Description 1199 Seal Systems Type Seal System Seal Location All In-Line Transmitters (3051S_TG, 3051TG, 2051TG, 2088G) W All Welded One Seal System High Side of Transmitter Seal Fill Fluid Specific Gravity at 77 F (25 C) Temperature Limits (1) D Silicone to 401 F (-45 to 205 C) G Glycerin and Water to 203 F (-15 to 95 C) Seal Type / ID, Description B 0.03-in. (0.711 mm) ID C 0.04-in. (1.092 mm) ID E 0.03-in. (0.711 mm) ID, PVC Coated with Closed End F 0.04-in. (1.092 mm) ID, PVC Coated with Closed End Measurement Length (2) ft (0.5 m) ft (0.7 m) ft (1.2 m) ft (1.7 m) ft (2.2 m) ft (2.7 m) ft (3.2 m) ft (3.7 m) ft (4.2 m) ft (4.7 m) ft (5.2 m) ft (6.2 m) ft (6.3 m) 3

4 July 2013 Table 1. The offering represents the most common options. The starred options ( ) should be selected for best delivery. The Expanded offering is subject to additional delivery lead time ft (7.2 m) ft (7.8 m) ft (8.2 m) ft (9.2 m) ft (9.3 m) Industry A ASME B16.5/ANSI B (American National s Institute/American Society of Mechanical Engineers) D EN (European ) J JIS B2238 Process Style TSM Threaded Submersible Seal Expanded Expanded FSM Flanged Submersible Seal Process Size Threaded (TSM) ANSI B ISO 7-1, DIN 2999, BS 21 (BS EN ), JIS B / NPT - Expanded Expanded Flanged (FSM) JIS B2238 ASME B16.5 / HG20615 EN / GOST / HG A 1 1 /2 in. - G 50 A 2 in. DN A 3 in. - J - - DN A - DN 100 F - - DN 40 Pressure Rating Threaded (TSM) ANSI B ISO 7-1, DIN 2999, BS 21 (BS EN ), JIS B psi 4.13 bar Flanged (FSM) JIS B2238 ASME B16.5 / HG20615 EN / GOST / HG K Class K Class K Class G - - PN 40 E - - PN 10 / 16 4

5 July 2013 Table 1. The offering represents the most common options. The starred options ( ) should be selected for best delivery. The Expanded offering is subject to additional delivery lead time. Diaphragm, Upper Housing, Flange Material Diaphragm Upper Housing Flange DG 321 SST 316 SST 316 SST Process Filter 000 No Filter /4 in. NPT Screen Insert (1) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70 F and must be further derated if ambient temperature exceeds 70 F (21 C). (2) Length is measured from the bottom of the threaded connection or gasket surface of the flange to the bottom of the seal. Please refer to the TSM and FSM drawings. 5

6 July 2013 Specifications Functional specifications Maximum working pressure limits Table 2. Maximum working pressure limits Rosemount 3051S_TG, Rosemount 3051T, Range Rosemount 2051T and Rosemount psig (2,07 bar) 2 60 psig (4,14 bar) Temperature limits Transmitter temperature limits 40 to 185 F (-40 to 85 C) With LCD display (1) : -40 to 175 F (-40 to 80 C) With option code P0: -20 to 185 F (-29 to 85 C) (1) LCD display may not be readable and LCD updates will be slower at temperatures below -4 F (-20 C). Fill fluid temperature limits Table 3. Fill fluid specifications Specific Gravity at 77 F Fill Fluid (25 C) Coeff. Of Therm. Exp. (cc/cc/ C) Viscosity at 77 F (25 C) (Centistokes) Silicone Glycerin and Water Temperature Limits -49 to 401 F (-45 to 205 C) 5 to 203 F (-15 to 95 C) Physical specifications Materials of construction Seal Diaphragm: 321 SST : 316 SST Armor: 304 SST or PVC-Coated 304 SST 6

7 July 2013 Dimensional drawings 3D drawing 2D dimensional drawing (40,77) 3.57 (90,7) Dimensions are in inches (millimeters) with Optional Screen Insert 7

8 July 2013 Rosemount Submersible Seal Threaded Submersible Seal (TSM Process Style) Side View Flanged Submersible Seal (FSM Process Style) Side View Measurement Length Measurement Length Dimensions are in inches (millimeters) 8

9 July 2013 Rosemount 3051S_T with Submersible Seal Threaded PlantWeb Housing Front View 4.20 (107) Junction Box Housing Front View 4.20 (107) 6.88 (174) Wireless Housing Front View External Antenna Extended Range External Antenna (204) 8.04 (204) 3.55 (90.1) 4.20 (107) (283) Side View 5.21 (132) 4.55 (116) Side View 3.45 (88) 6.88 (174) Side View 6.71 (170) 6.05 (155) 8.19 (208) Dimensions are in inches (millimeters) 9

10 July 2013 Rosemount 3051T with Submersible Seal Threaded Rosemount 3051T Dimensional Drawings 4.1 (105) 5.32 (135) 4.45 (113) 7.2 (183) Rosemount 3051T Wireless Housing Dimensional Drawings 4.22 (107.1) 5.62 (142.9) 7.49 (190.3) U-Bolt Bracket Dimensions are in inches (millimeters) 10

11 July 2013 Rosemount 2051T with Submersible Seal Threaded 3.85 (98) Rosemount 2051T Dimensional Drawings 5.66 (144) 5.20 (132) 4.36 (111) 7.15 (182) Fieldbus Display Cover HART Display Cover Transmitter Circuitry Terminal s Rosemount 2051T Wireless Housing 4.22 (107.1) 5.62 (142.9) 7.49 (190.3) U-Bolt Bracket Dimensions are in inches (millimeters) 11

12 Rev AA Product Data Sheet July 2013 Rosemount 2088 with Submersible Seal Threaded Rosemount (20) Clearance for Cover Removal 2 X ½ 14 NPT Conduit 5.0 (127) 4.3 (110) Max Optional Display Cover Transmitter Circuitry 3.9 (99) 4.7 (120) Certifications Tag 5.75 (146) Typical Terminal s Dimensions are in inches (millimeters) Emerson Process Management Rosemount Inc Market Boulevard Chanhassen, MN USA T (U.S.) T (International) (952) F (952) Emerson Process Management Latin America 1300 Concord Terrace, Suite 400 Sunrise Florida USA Tel Emerson Process Management Asia Pacific Pte Ltd 1 Pandan Crescent Singapore Tel Fax Service Support Hotline : Enquiries@AP.EmersonProcess.com Emerson Process Management Blegistrasse 23 P.O. Box 1046 CH 6341 Baar Switzerland Tel +41 (0) Fax +41 (0) Emerson FZE P.O. Box Jebel Ali Free Zone Dubai UAE Tel Fax Terms and Conditions of Sale can be found at \terms_of_sale The Emerson logo is a trade mark and service mark of Emerson Electric Co. Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc. PlantWeb is a registered trademark of one of the Emerson Process Management group of companies. HART and WirelessHART are registered trademarks of the HART Communication Foundation All other marks are the property of their respective owners Rosemount Inc. All rights reserved.