Electronic timers Product group picture

Elecronic imers Produc group picure / Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

Elecronic imers Table of Conens Elecronic imers Produc group picure / Table of Conens /2 Overview /3 Approvals and Marks /4 CT-D range /5 Produc group picure /5 Table of Conens /6 Benefis and advanages /7 Ordering deails /8 Funcion diagrams /9 Connecion diagrams /2 Technical daa /3 Technical daa, Technical diagrams /5 Wiring noes, Dimensional drawings /6 CT-E range /7 Produc group picure /7 Table of Conens /8 Benefis and advanages /9 Ordering deails /20 Ordering deails /2 Funcion diagrams /22 Connecion diagrams /27 Technical daa /28 Technical diagrams /30 Wiring noes, Dimensional drawings /3 Noes /32 CT-S range /33 Produc group picure /33 Table of Conens /34 Benefis and advanages /35 Conversion able /36 Ordering deails /37 Ordering deails - Accessories /40 Funcion diagrams /4 Connecion diagrams /49 Technical daa /52 Technical diagrams /55 Wiring noes, Dimensional drawings /56 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /2

Elecronic imers Overview CT-D range CT-E range CT-S range Timing funcion mulifuncional single-funcional mulifuncional single-funcional mulifuncional single-funcional A ON-delay CT-MFD CT-ERD CT-MFE, CT- MKE CT-ERE, CT- EKE B OFF-delay CT-MFD CT-AHD CT-MFE CT-AHE, CT- ARE, CT-AKE CT-MVS, CT- MFS, CT-MBS, CT-WBS CT-MVS, CT- MFS, CT-MBS AB ON- and OFF-delay CT-MVS, CT-MXS, CT-MFS, CT-MBS CA Impulse-ON CT-MFD CT-VWD CT-MFE, CT- MKE CT-VWE CT-MVS, CT-MFS, CT-MBS, CT-WBS CB Impulse-OFF CT-MFD CT-AWE CT-MVS, CT- MFS, CT-MBS CE Impulse-ON and OFF CT-MXS A Flasher CT-MFD CT-EBD CT-MFE, CT- CT-MFS, CTsaring wih ON MKE MBS, CT-WBS B E E Flasher saring wih OFF Flasher saring wih ON or OFF Pulse generaor saring wih ON or OFF CT-MFD CT-TGD CT-MFE, CT- MKE CT-EBE CT-MFS, CT- MBS, CT-WBS CT-MVS CT-MXS H Pulse former CT-MFD CT-MFE CT-MVS, CT- MFS, CT-MBS F Sar-dela change-over CT-SDD, CT- SAD FC FA Sar-dela change-over wih impulse Sar-dela change-over wice ON-delayed A+ AC BC G furher funcions (depending on device) CT-SDE CT-YDE CT-MVS.2x, CT-MFS, CT-MBS CT-MVS, CT-MXS, CT-MFS, CT- MBS, CT-WBS G Swiching relay CT-IRE CT-IRS CT-ERS CT-APS, CT-AHS, CT-ARS, CT-VBS CT-SDS Technical daa (exrac) Time ranges 7 (0.05 s - 00 h) CT-SDD, CT-SAD: 4 (0.05 s - 0 min) Mulifuncion devices: 8 (0.05 s - 00 h) Single-funcion devices: 5 single ranges (0.05- s, 0.-0 s, 0.3-30 s, 3-300 s, 0.3-300 min) Conrol supply volage Wide and muli ranges Wide ranges Single and dual ranges Type and number of conacs Conrol inpus or 2 c/o conacs CT-SDD, CT-SAD: 2 n/o conacs volage-relaed riggering, polarized, capable of swiching a parallel load c/ o conac CT-SDE: n/o conac and n/c conacs CT-MKE, CT-EKE, CT-AKE: hyrisor volage-relaed riggering, polarized CT-MFE, CT-AHE, CT-AWE: wih auxiliary volage 0 (0.05 s - 300 h) CT-ARS, CT-SDS: 7 (0.05 s- 0 min) Wide, muli and single ranges or 2 c/o conacs CT-MVS.2, CT-MFS, CT-MBS: 2nd c/o conac selecable as ins. conac CT-SDS: 2 n/o conacs volage-relaed riggering, non-polarized, capable of swiching a parallel load CT-MFS, CT-MBS, CT-AHS: vol-free riggering /3 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

Elecronic imers Approvals and marks J exising j pending CT-D Approvals CT-MFD.2 CT-MFD.2 CT-ERD.2 CT-ERD.22 CT-AHD.2 CT-AHD.22 CT-VWD.2 CT-EBD.2 CT-TGD.2 CT-TGD.22 CT-SDD.22 CT-SAD.22 A UL 508, CAN/CSA C22.2 No.4 J J J J J J J J J J J J D GOST J J J J J J J J J J J J K CB scheme J J J J J J J J J J J J E CCC J J J J J J J J J J J J Marks a CE J J J J J J J J J J J J b C-Tick J j J j J j J J J j j j J exising j pending CT-E Approvals CT-MFE CT-ERE CT-AHE CT-ARE CT-VWE CT-AWE CT-EBE CT-YDE CT-SDE CT-IRE CT-MKE CT-EKE CT-AKE A UL 508, CAN/CSA C22.2 No.4 J J J J J J J J J J J J J C GL J J J J J J J J J J J J J D GOST J J J J J J J J J J J J J K CB scheme J J J J J J J J J J E CCC J J J J J J J J J J L RMRS J J J J J J J J J J J J J Marks a CE J J J J J J J J J J J J J b C-Tick J J J J J J J J J J J J J J exising j pending CT-S Approvals CT-MVS.2 CT-MVS.2x CT-MXS.22 CT-MFS.2 CT-MBS.22 CT-WBS.22 CT-ERS.2 CT-ERS.2x CT-APS.2 CT-APS.2x CT-AHS.22 CT-ARS. CT-ARS.2 CT-VBS.x CT-SDS.2x CT-IRS.x CT-IRS.2x CT-IRS.3x A UL 508, CAN/CSA C22.2 No.4 J J J J J J J J J J J J J J J C GL J J J J J J J J J J J j j J D GOST J J J J J J J J J J J J J J J J J J K CB scheme J J J J J J J J J J J J J J J J J J E CCC J J J J J J J J J J J J J J J J J J Marks a CE J J J J J J J J J J J J J J J J J J b C-Tick J J J J J J J J J J J J J J J J J J Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /4

CT-D range Produc group picure /5 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-D range Table of Conens CT-D Range Produc group picure /5 Table of Conens /6 Benefis and advanages /7 Ordering deails /8 Funcion diagrams /9 Connecion diagrams /2 Technical daa /3 Technical daa, Technical diagrams /5 Wiring noes, Dimensional drawings /6 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /6

CT-D range Benefis and advanages Characerisics J Diversiy: J 2 mulifuncion imers J 0 single-funcion imers J Conrol supply volages: J Wide range: 2-240 V AC/DC J Muli range: 24-48 V DC, J 7 ime ranges from 0.05s o 00 h or 4 ime ranges from 0.05 s - 0 min J Widh of only 7.5 mm J Ligh-grey housing in RAL 7035 J Devices wih: c/o conac (250 V / 6 A) or 2 c/o conacs (250 V / 5 A) Conrol inpu: volage-relaed riggering, polarized, capable of swiching parallel loads J Approvals / Marks (parly depending) A, D, K, E / a, b Benefis Direc reading scales Direc seing of he ime delay wihou any addiional calculaion provides accurae ime delay adjusmen. LEDs for saus indicaion 2 All acual operaional saes are displayed by fron-face LEDs, hus simplifying commissioning and roubleshooing. Swiching currens The CT-D range imers allow an oupu load of up o 6 A on devices wih c/o conac and up o 5 A on devices wih 2 c/o conacs. Connecion erminals 3 Wide erminal spacing allows connecion of wires: 2 x.5 mm² (2 x 6 AWG) wih wire end ferrules or - 2 x 2.5 mm² (2 x 4 AWG) wihou ferrules. Widh 7,5 mm 4 Wih heir widh of 7.5 mm only, he CT-D range imers are ideally suied for insallaion in disribuion panels. 3 2 3 2 4 Operaing conrols LEDs for saus indicaion U - : V conrol supply volage applied W iming R, R, R2 - yellow LED: V oupu relay energized 2 Time range adjusmen 3 Fine adjusmen of he ime delay 4 Preselecion of he iming funcion mulifuncional single-funcional 2CDC 253 066 F0006 2 2CDC 253 32 F0006 3 2CDC 253 033 F0004 4 2CDC 253 02 F0004 7.5 mm /7 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-D range Ordering deails Descripion The CT-D range in MDRC design wih a widh of only 7.5 mm fis ino all domesic insallaion and disribuion panels. The CT-D range represens a link beween indusry and he insallaion ypes. For maximum flexibiliy in operaion, 0 single-funcion as well as 2 mulifuncion devices wih 7 iming funcions are available. The devices offer 4 or 7 ime ranges from 0.05 seconds up o 00 hours. Their wide inpu range allows he use in applicaions worldwide. CT-MFD.2 2CDC 25 089 F0006 Ordering deails Time funcion Raed conrol supply volage Time ranges Conrol inpu Oupu Type Order code Price pce Weigh ( pce) kg (lb) A B CA CB DA DB H 24-48 V DC 7 (0.05 s - 00 h) n c/o CT-MFD.2 SVR500020R0000 0.060 (0.32) CT-ERD.22 A ON-delay B OFF-delay CA Impulse-ON CB Impulse-OFF DA Flasher saring wih ON DB Flasher saring wih OFF H Pulse former ED Pulse generaor F Sar-dela change-over 2CDC 25 09 F0006 A B CA CB DA DB H 2-240 V AC/DC 7 (0.05 s - 00 h) n 2 c/o CT-MFD.2 SVR500020R00 0.065 (0.43) A c/o CT-ERD.2 SVR50000R0000 0.060 (0.32) A 2 c/o CT-ERD.22 SVR50000R000 0.065 (0.43) B 7 (0.05 s - 00 h) n c/o CT-AHD.2 SVR5000R0000 0.060 (0.32) B 0.065 n 2 c/o CT-AHD.22 SVR5000R000 (0.43) CA 24-48 V DC c/o CT-VWD.2 SVR50030R0000 0.060 DA c/o CT-EBD.2 SVR50050R0000 (0.32) ED 0.060 n c/o CT-TGD.2 ) SVR50060R0000 2 x 7 (0.05 s - (0.32) ED 00 h) 0.065 n c/o CT-TGD.22 ) SVR50060R000 (0.43) F 4 (0.05 s - 0 2 n/o CT-SDD.22 2) SVR5002R000 0.065 F min) 2 n/o CT-SAD.22 3) SVR50020R000 (0.43) ) ON and OFF imes adjusable independenly: 2 x 7 ime ranges 0.05 s - 00 h 2) Transiion ime 50 ms fixed 3) Transiion ime adjusable Synonyms used expression alernaive expression(s) used expression alernaive expression(s) c/o conac SPDT volage-relaed we / non-floaing 2 c/o conacs DPDT vol-free dry / floaing Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /8

CT-D range Funcion diagrams Remarks Legend G Conrol supply volage no applied / Oupu conac open B Conrol supply volage applied / Oupu conac closed -Y/B Conrol inpu wih volage-relaed riggering Terminal designaions on he device and in he diagrams The s c/o conac is always designaed 5-6/8. The 2nd c/o conac is designaed 25-26/28. The n/o conacs of he sar-dela imers are designaed wih 7-8 and 7-28. Conrol supply volage is always applied o erminals -. Funcion of he yellow LED The yellow LED R glows as soon as he oupu relay energizes and urns off when he oupu relay de-energizes. A ON-delay (Delay on make) CT-ERD, CT-MFD This funcion requires coninuous conrol supply volage for iming. Timing begins when conrol supply volage is applied. The flashes during iming. When he seleced ime delay is complee, he oupu relay energizes and he flashing urns seady. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. Conrol inpu -Y/B of he CT-MFD is disabled when his funcion is seleced. B OFF-delay wih auxiliary volage (Delay on break) CT-AHD, CT-MFD This funcion requires coninuous conrol supply volage for iming. If conrol inpu -Y/B is closed, he oupu relay energizes immediaely. If conrol inpu -Y/B is opened, he ime delay sars. The flashes during iming. When he seleced ime delay is complee, he oupu relay de- energizes and he flashing urns seady. If conrol inpu -Y/B recloses before he ime delay is complee, he ime delay is rese and he oupu relay does no change sae. Timing sars again when conrol inpu -Y/B re-opens. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - 5-8, 25-28 5-6, 25-26 = adjused ime delay < 2CDC 252 06 F0206 - -Y/B 5-8, 25-28 5-6, 25-26 < 2CDC 252 07 F0206 = adjused ime delay CA Impulse-ON (Inerval) CT-VWD, CT-MFD This funcion requires coninuous conrol supply volage for iming. The oupu relay energizes immediaely when conrol supply volage is applied and de-energizes afer he se pulse ime is complee. The green LED flashes during iming. When he seleced pulse ime is complee, he flashing urns seady. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. Conrol inpu -Y/B of he CT-MFD is disabled when his funcion is seleced. CB Impulse-OFF wih auxiliary volage (Trailing edge inerval) CT-MFD This funcion requires coninuous conrol supply volage for iming. If conrol supply volage is applied, opening conrol inpu -Y/B energizes he oupu relay immediaely and sars iming. The flashes during iming. When he seleced pulse ime is complee, he oupu relay de-energizes and he flashing urns seady. Closing conrol inpu -Y/B, before he ime delay is complee, deenergizes he oupu relay and reses he ime delay. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - 5-8, 25-28 5-6, 25-26 = adjused pulse ime < 2CDC 252 08 F0206 - -Y/B 5-8, 25-28 5-6, 25-26 < 2CDC 252 09 F0206 = adjused pulse ime /9 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-D range Funcion diagrams A Flasher, saring wih he ON ime (Recycling equal imes, ON firs) CT-EBD, CT-MFD Applying conrol supply volage sars iming wih symmerical ON & OFF imes. The cycle sars wih an ON ime firs. The ON & OFF imes are displayed by he flashing, which flashes wice as fas during he OFF ime. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. Conrol inpu -Y/B of he CT-MFD is disabled when his funcion is seleced. B Flasher, saring wih he OFF ime (Recycling equal imes, OFF firs) CT-MFD Applying conrol supply volage sars iming wih symmerical ON & OFF imes. The cycle sars wih an OFF ime firs. The ON & OFF imes are displayed by he flashing, which flashes wice as fas during he OFF ime. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. Conrol inpu -Y/B of he CT-MFD is disabled when his funcion is seleced. - 5-8, 25-28 5-6, 25-26 = adjused flashing ime 2CDC 252 029 F0206-5-8, 25-28 5-6, 25-26 = adjused flashing ime 2CDC 252 030 F0206 H Pulse former (Single sho) CT-MFD This funcion requires coninuous conrol supply volage for iming. Closing conrol inpu -Y/B energizes he oupu relay immediaely and sars iming. Operaing he conrol conac swich -Y/B during he ime delay has no effec. The flashes during iming. When he seleced ON ime is complee, he oupu relay de-energizes and he flashing urns seady. Afer he ON ime is complee, i can be resared by closing conrol inpu -Y/B. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. E Pulse generaor, saring wih he ON or OFF ime (Recycling unequal imes, ON or OFF firs) CT-TGD This funcion requires coninuous conrol supply volage for iming. Applying conrol supply volage, wih open conrol inpu -Y/B, sars iming wih an ON ime firs. Applying conrol supply volage, wih closed conrol inpu -Y/B, sars iming wih an OFF ime firs. The ON & OFF imes are displayed by he flashing, which flashes wice as fas during he OFF ime. The ON & OFF imes are independenly adjusable. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - -Y/B 5-8, 25-28 5-6, 25-26 2CDC 252 0 F0206 - -Y/B 5-8, 25-28 5-6, 25-26 2 2 2CDC 252 F0206 = adjused pulse ime = adjused OFF ime 2 = adjused ON ime Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /0

CT-D range Funcion diagrams F Sar-dela change-over (Sar-dela saring) CT-SDD, CT-SAD This funcion requires coninuous conrol supply volage for iming. Applying conrol supply volage o erminals -, energizes he sar conacor conneced o erminals 7-8 and begins he se saring ime. The flashes during iming. When he saring ime is complee, he firs oupu conac de-energizes he sar conacor. Now, he ransiion ime 2 sars. When he ransiion ime is complee, he second oupu conac energizes he dela conacor conneced o erminals 7-28. The dela conacor remains energized as long as conrol supply volage is applied o he uni. - 7-8 7-28 2 = adjused saring ime 2 = ransiion ime CT-SDD: 2 = 50 ms CT-SAD: 2 adjusable 2CDC 252 2 F0206 L F3 F2 S 0 95 96 2 22 2CDC 252 28 F0b06 L L2 L3 3 5 -F 2 4 6 2CDC 252 02 F0b07 I S2 3 K2 4 KT 53 54 7 8 7 28 K2 3 4 K 3 4 -K2 2 3 4 5 6 -K3 2 3 4 5 6 -K 2 3 4 5 6 K3 22 2 K 22 2 -F2 3 5 2 4 6 97 98 95 96 N KT K K3 K2 Y N W V U -M M 3 ~ W2 V2 U2 Conrol circui diagram Power circui diagram / Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-D range Connecion diagrams CT-MFD.2 CT-MFD.2 A CT-ERD.22 A CT-ERD.2 Y/ B 5 5 25 25 6 8 26 28 8 6 Y/B 28 26 2CDC 252 3 F0b06 Y/ B 8 5 6 6 5 Y/B 8 2CDC 252 4 F0b06 5 5 25 25 6 8 26 28 8 6 28 26 2CDC 252 5 F0b06 8 5 5 6 8 6 2CDC 252 77 F0b05-2-240 V AC/DC 5-6/8. c/o conac 25-26/28 2. c/o conac -Y/B Conrol inpu - 24-48 V DC or 5-6/8. c/o conac -Y/B Conrol inpu - 24-48 V DC or 5-6/8. c/o conac 25-26/28 2. c/o conac - 24-48 V DC or 5-6/8. c/o conac B CT-AHD.22 B CT-AHD.2 CA CT-VWD.2 A CT-EBD.2 Y/ B 5 5 25 25 6 8 26 28 8 6 Y/B 28 26 2CDC 252 6 F0b06 Y/ B 8 5 6 6 5 Y/B 8 2CDC 252 7 F0b06 8 5 5 6 8 6 2CDC 252 79 F0b05 8 5 5 6 8 6 2CDC 252 80 F0b05-24-48 V DC or 5-6/8. c/o conac 25-26/28 2. c/o conac -Y/B Conrol inpu - 24-48 V DC or 5-6/8. c/o conac -Y/B Conrol inpu - 24-48 V DC or 5-6/8. c/o conac - 24-48 V DC or 5-6/8. c/o conac E CT-TGD.22 E CT-TGD.2 F CT-SDD.22 F CT-SAD.22 Y/ B 5 5 25 25 6 8 26 28 8 6 Y/B 28 26 2CDC 252 8 F0b06 Y/ B 8 5 6 6 5 Y/B 8 2CDC 252 9 F0b06 7 8 7 28 28 8 2CDC 252 60 F0b06 7 8 7 28 28 8 2CDC 252 60 F0b06-24-48 V DC or 5-6/8. c/o conac 25-26/28 2. c/o conac -Y/B Conrol inpu - 24-48 V DC or 5-6/8. c/o conac -Y/B Conrol inpu - 24-48 V DC or 7-8. n/o conac (sar conacor) 7-28 2. n/o conac (dela conacor) - 24-48 V DC or 7-8. n/o conac (sar conacor) 7-28 2. n/o conac (dela conacor) Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /2

CT-D range Technical daa Daa a T a = 25 C and raed values, unless oherwise indicaed CT-D wih c/o CT-D wih 2 c/o CT-MFD.2 conac conacs Inpu circui - Supply circui Raed conrol supply volage U s / 24-48 V DC 2-240 V AC/DC Raed conrol supply volage U S olerance -5...+0 % Raed frequency AC/DC versions DC or 50/60 Hz AC versions 50/60 Hz Frequency range DC or 47-63 Hz Typical curren / power consumpion see daa shee Power failure buffering ime min. 20 ms min. 30 ms Inpu circui - Conrol circui Kind of riggering volage-relaed riggering Conrol inpu, Conrol funcion -Y/B sar iming exernal Parallel load / polarized yes / yes Raed operaional volage U e 250 V Minimum swiching volage / minimum swiching curren 2 V / 00 ma Maximum swiching volage / maximum swiching curren see load limi curves Minimum conrol pulse lengh 30 ms Conrol volage poenial see raed conrol supply volage Curren consumpion of he conrol inpu max. 4 ma see daa shee Timing circui.) 0.05- s 2.) 0.5-0 s 3.) 5-00 s 4.) 0.5-0 min 7 ime ranges 0.05 s - 00 h Time ranges 5.) 5-00 min 6.) 0.5-0 h 7.) 5-00 h 4 ime ranges 0.05 s - 0 min (CT-SDD, CT-SAD).) 0.05- s 2.) 0.5-0 s 3.) 5-00 s 4.) 0.5-0 min Recovery ime < 50 ms Accuracy wihin he raed conrol supply volage olerance i < 0.005 % / V Accuracy wihin he emperaure range i < 0.06 % / C Repea accuracy (consan parameers) i < ± 0.5 % Sar-dela ransiion ime CT-SDD / CT-SAD fixed 50 ms / adjusable: 20-00 ms in seps of 0 ms Sar-dela ransiion ime olerance CT-SDD / CT-SAD ±3 ms Indicaion of operaional saes Conrol supply volage / iming U: V: conrol supply volage applied W: iming Relay saus R: yellow LED V: oupu relay energized Oupu circui 5-6/8 Relay, c/o conac - Kind of oupu 5-6/8; 25-26/28 - Relay, 2 c/o conacs 7-8; 7-28 relay, 2 n/o conacs (CT-SDD, CT-SAD) Conac maerial Cd-free, see daa shee Raed operaional volage U e IEC/EN 60947-250 V Minimum swiching volage / minimum swiching curren 2 V / 00 ma Maximum swiching volage / maximum swiching curren see load limi curves AC2 (resisive) a 230 V 6 A 5 A 0.75 A Raed operaional curren I e AC5 (inducive) a 230 V 3 A 3 A (IEC/EN 60947-5- ) (AC5 n/c conac) AC5 (inducive) a 230 V 6 A 5 A DC3 (inducive) a 24 V 2 A 2 A ) A Uilizaion caegory Raing Code) B 300 C 300 max. raed operaional volage 300 V AC AC raing (UL 508) Maximum coninuous hermal curren a B300 5 A 2.5 A max. making/breaking apparen power a B300 3600 VA / 360 VA 800 VA / 80 VA Mechanical lifeime 30 x 0 6 swiching cycles Elecrical lifeime 0. x 0 6 swiching cycles Max. fuse raing o achieve shor-circui n/c conac 6 A fas-acing proecion (IEC/EN 60947-5-) n/o conac 0 A fas-acing /3 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-D range Technical daa CT-D wih c/o CT-D wih 2 c/o CT-MFD.2 conac conacs General daa Duy ime 00% Dimensions (W x H x D) 7.5 x 70 x 58 mm 7.5 x 80 x 58 mm (0.69 x 2.76 x 2.28 in) (0.69 x 3.5 x 2.28 in) Weigh see ordering deails Mouning DIN rail (IEC/EN 6075), snap-mouning wihou any ool Mouning posiion any Minimum disance o oher unis horizonal / verical no / no Degree of proecion housing / erminals IP50 / IP20 Elecrical connecion fine-srand wih(ou) wire end ferrule 2 x 0.5-.5 mm 2 (2 x 20-6 AWG) Wire size x 0.5-2.5 mm 2 ( x 20-4 AWG) rigid 2 x 0.5-.5 mm 2 (2 x 20-6 AWG) x 0.5-4 mm 2 ( x 20-2 AWG) Sripping lengh 7 mm (0,28 in) Tighening orque 0.5-0.8 Nm Environmenal daa Ambien emperaure range operaion / sorage -20... +60 C / -40... +85 C Damp hea (cyclic) IEC/EN 60068-2-30 6 x 24 h cycles, 55 C, 95 % RH Vibraion (sinusoidal) IEC/EN 60068-2-6 40 m/s 2, 20 cycles, 0...50...0 Hz Shock (half-sine) IEC/EN 60068-2-27 00 m/s 2, ms Isolaion daa Raed impulse wihsand volage U imp beween all isolaed circuis VDE 00, IEC/EN 60664-4 kv;.2/50 µs Polluion caegory IEC/EN 60664-, VDE 00 3 Overvolage caegory IEC/EN 60664-, VDE 00 III inpu circui / oupu circui 300 V Raed insulaion volage U i oupu circui / oupu circui 2 300 V Basic insulaion (IEC/EN 640) inpu circui / oupu circui 300 V Proecive separaion (VDE 006 par 0 and par 0/; IEC/EN 640) inpu circui / oupu circui 250 V Power-frequency wihsand volage es (es volage, rouine es) beween all isolaed circuis 2.5 kv, 50 Hz, s Sandards Produc sandard IEC 682-, EN 682- +, DIN VDE 0435 par 202 Low Volage Direcive 2006/95/EC EMC Direcive 2004/08/EC RoHS Direcive 2002/95/EC Elecromagneic compaibiliy Inerference immuniy o IEC/EN 6000-6-, IEC/EN 6000-6-2 elecronic discharge IEC/EN 6000-4-2 Level 3 (6 kv / 8 kv) radiaed, radio-frequency. elecromagneic filed IEC/EN 6000-4-3 Level 3 (0 V / m) elecrical fas ransien/burs IEC/EN 6000-4-4 Level 3 (2 kv / 5 khz) surge IEC/EN 6000-4-5 Level 4 conduced disurbances, induced by radio-frequency fi elds IEC/EN 6000-4-6 Level 3 (0 V) Inerference emissions IEC/EN 6000-6-3, IEC/EN 6000-6-4 high-frequency radiaed IEC/CISPR 22, EN 55022 Class B high-frequency conduced IEC/CISPR 22, EN 55022 Class B Approvals and Marks see page /4. Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /4

CT-D range Technical daa, Technical diagrams Technical diagrams Load limi curves AC load (resisive) DC load (resisive) AC volage [V] resisive load 2CDC 252 044 F0207 DC volage [V] resisive load 2CDC 252 045 F0207 CT-D.x AC curren [A] CT-D.x DC curren [A] AC volage [V] resisive load 2CDC 252 22 F0206 DC volage [V] resisive load 2CDC 252 2 F0206 CT-D.2x AC curren [A] CT-D.2x DC curren [A] Deraing facor F for inducive AC load Conac lifeime Deraing facor F.0 0.9 0.8 0.7 2CDC 252 24 F0206 Swiching cycles 250 V resisive load 2CDC 252 23 F0206 0.6 0.5 0. 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9.0 cos ϕ Swiching curren [A] /5 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-D range Wiring noes, Dimensional drawings Wiring noes for devices wih conrol inpu A parallel load o he conrol inpu is possible L(+) Y/B 2CDC 252 02 F0b06 N(-) Dimensional drawings dimensions in mm 0.69 7,5 0.2 5 58 2.28 43,4.7 0.69 7,5 0.2 5 58 2.28 43,4.7 70 2.76 45.77 2CDC 252 3 F0b06 80 3.5 45.77 2CDC 252 30 F0b06 CT-D devices wih c/o conac or 2 n/o conacs CT-D devices wih 2 c/o conacs Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /6

CT-E range Produc group picure /7 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-E range Table of Conens CT-E Range Produc group picure /7 Table of Conens /8 Benefis and advanages /9 Ordering deails /20 Funcion diagrams /22 Connecion diagrams /27 Technical daa /28 Technical diagrams /30 Wiring noes, Dimensional drawings /3 Noes /32 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /8

CT-E range Benefis and advanages Characerisics J Diversiy: J 2 mulifuncion imers J 56 single-funcion imers J 4 swiching relays J Conrol supply volages: J Dual range: 24 V AC/DC J Single range: 0-30 V AC, 220-240 V AC J Wide range: /DC (CT-MFE) J Time ranges J 5 single ranges: 0.05- s, 0.-0 s, 0.3-30 s, 3-300 s, 0.3-30 min J 8 ime ranges: 0.05 s - 00 h (CT-MFE) J Devices wih c/o (SPDT) conac (250 V / 4 A) or solid-sae oupu for high swiching frequencies (hyrisor 0.8 A) J Swiching relay CT-IRE for added swiching conacs wih eiher side-by-side or diagonally posiioned connecion erminals Benefis Direc reading scales Direc seing of he ime delay wihou any addiional calculaion provides accurae ime delay adjusmen. LEDs for saus indicaion 2 All acual operaional saes are displayed by fron-face LEDs, hus simplifying commissioning and roubleshooing. Connecion screws in M3 (Pozidrive ) 3 Easy and fas ighening and release of he connecion screws wih pozidrive, pan- or crosshead screwdriver. Solid-sae oupu 4 Devices wih solid-sae oupu are he perfec soluion for high operaion cycles. 2 3 Operaing conrols LEDs for saus indicaion U - : V conrol supply volage applied R2: red LED: V oupu relay energized 2 Time range adjusmen (only mulifuncional devices) 3 Fine adjusmen of he ime delay 4 Preselecion of he iming funcion (only mulifuncional devices) 4 SVC 0 000 F0508 2 SVC 0 000 F0500 3 4 SVC 0 000 F0506 AL AL 2CDC 252 66 F0005 2CDC 252 66 F0005 /9 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-E range Ordering deails Descripion The CT-E range wih is excellen price/performance raio offers an ideal soluion for serial applicaions. 56 singlefuncion devices wih 5 differen ime ranges as well as 2 mulifuncion imers wih 6 funcions and 8 ime ranges offer he highes possible flexibiliy for almos every applicaion. For high operaing cycles, conac-free CT-E imers wih solid-sae oupu are available. CT-MFE SVR 550 029 F800 Ordering deails Time funcion Raed conrol supply volage Time ranges Conrol Inpu Oupu Type Order code Price pce Weigh ( pce) kg (lb) A B CA DB DA H 24-240 V AC/DC 8 (0.05 s - 00 h) n c/o CT-MFE SVR550029R800 0.08 (0.8) CT-AHE A B CA CB DA DB H SVR 550 F00 ON-delay OFF-delay Impulse-ON Impulse-OFF Flasher saring wih ON Flasher saring wih OFF Pulse former A B B ) CA CB ) 0.-0 s SVR55007R00 24 V AC/DC, 220-240 V AC 0.3-30 s 3-300 s SVR55007R400 SVR55007R200 0.3-30 min SVR55007R500 c/o CT-ERE 0.-0 s SVR55000R00 0-30 0.3-30 s SVR55000R400 V AC 3-300 s SVR55000R200 0.3-30 min SVR55000R500 0.-0 s SVR5508R00 24 V AC/DC 0.3-30 s SVR5508R400 3-300 s SVR5508R200 0.-0 s SVR5500R00 0-30 V AC 0.3-30 s n c/o CT- AHE 2) SVR5500R400 3-300 s SVR5500R200 0.-0 s SVR550R00 220-240 V AC 0.3-30 s SVR550R400 3-300 s SVR550R200 24 V AC/DC, 0.-0 s SVR55027R00 220-240 V AC 0.3-30 s SVR55027R400 c/o CT-ARE 0-30 0.-0 s SVR55020R00 V AC 0.3-30 s SVR55020R400 0.-0 s SVR55037R00 24 V AC/DC, 220-240 V AC 0.3-30 s SVR55037R400 3-300 s SVR55037R200 c/o CT-VWE 0.-0 s SVR55030R00 0-30 V AC 0.3-30 s SVR55030R400 3-300 s SVR55030R200 24 V AC/DC SVR5505 R300 0-30 V AC 0.05- s n c/o CT-AWE SVR55050 R300 220-240 V AC SVR5505R300 0.08 (0.8) 0.08 (0.8) 0.08 (0.8) 0.08 (0.8) 0.08 (0.8) ) wihou auxiliary volage, True Off-delay imer 2) wih conrol inpu Synonyms used expression alernaive expression(s) used expression alernaive expression(s) c/o conac SPDT volage-relaed we / non-floaing 2 c/o conacs DPDT vol-free dry / floaing Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /20

CT-E range Ordering deails Ordering deails Time funcion Raed conrol supply volage Time ranges Conrol Inpu Oupu Type Order code Price pce Weigh ( pce) kg (lb) CT-AWE 2CDC 25 25 F0004 CB 0.-0 s SVR55048R00 24 V AC/DC 0.3-30 s SVR55048R400 3-300 s SVR55048R200 0.-0 s SVR55040R00 0-30 V AC 0.3-30 s CT-AWE n c/o 2) SVR55040R400 3-300 s SVR55040R200 0.-0 s SVR5504R00 220-240 V AC 0.3-30 s SVR5504R400 3-300 s SVR5504R200 0.08 (0.8) CT-IRE 2CDC 25 28 F0004 DB FA FC 24 V AC/DC, 220-240 V AC 0.-0 s c/o CT-EBE 7) SVR55067R00 0.08 (0.8) 0-30 V AC SVR55060R00 0.-0 s SVR550207R00 24 V AC/DC, 220-240 V AC 0.3-30 s SVR550207R400 3-300 s CT-YDE SVR550207R200 c/o ) 0.-0 s SVR550200R00 0-30 V AC 0.3-30 s SVR550200R400 3-300 s SVR550200R200 24 V AC/DC, SVR55027R400 220-240 V AC n/o + CT-SDE 0.3-30 s 3) 8) 0-30 V AC n/c SVR55020R400 0.08 (0.8) 0.08 (0.8) 380-45 V AC SVR55022R400 A CA DA DB 24-240 V AC/DC 0.-0 s, 3-300 s CT-MKE 6) 9) SVR55009R0000 0.08 (0.8) A B CA CB DA DB H G FA FC DE ON-delay A OFF-delay Impulse-ON Impulse-OFF Flasher saring wih ON B Flasher saring wih OFF Pulse former Swiching relay G Sar-dela change-over wice ON-delayed Sar-dela change-over wih impulse G Pulse generaor saring wih ON or OFF 24-240 V AC/DC 24 V AC/DC 220-240 V AC/DC 24 V AC/DC 220-240 V AC/DC 0.-0 s solidesae SVR550509R000 0.3-30 s CT-EKE SVR550509R4000 3-300 s SVR550509R2000 0.-0 s SVR55059R000 0.3-30 s CT-AKE SVR55059R4000 3-300 s SVR55059R2000 c/o CT-IRE SVR550228R900 4) SVR55022R900 c/o CT-IRE 5) ) wihou auxiliary volage 2) wih conrol inpu 3) wih fixed ransiion ime 4) / diagonally 5) / on op 6) solid-sae oupu, funcions and ime range selecion via exernal jumpers 7) symeric ON & OFF imes 8) common conac 9) Funcions: ON-delay (AC/DC), Impuls-ON (AC only), Flasher saring wih OFF (AC only) SVR550238R900 SVR55023R900 0.08 (0.8) 0.08 (0.8) 0.08 (0.8) 0.08 (0.8) Noice CT-...KE are solid-sae imers wih hyrisor oupu for 2-wire applicaions. They are conneced direcly in series wih he conrol coil of conacors or relays. Volage should no be applied wihou a load conneced, because here is no curren limiing in he uni. /2 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-E range Funcion diagrams Remarks Legend G Conrol supply volage no applied / Oupu conac open B Conrol supply volage applied / Oupu conac closed -Y/B Conrol inpu wih volage-relaed riggering Terminal designaions on he device and in he diagrams The c/o conac is always designaed 5-6/8. The n/o conacs are designaed wih 5-6 and 5-8. Conrol supply volage is always applied o erminals -/B. Funcion of he red LED The red LED R glows as soon as he oupu relay energizes and urns off when he oupu relay de-energizes. A ON-delay (Delay on make) CT-ERE, CT-MFE Timing begins when conrol supply volage is applied. When he seleced ime delay is complee, he oupu relay energizes. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. Inerruping conrol supply volage before he ime delay is complee, reses he ime delay. The oupu relay does no energize. Conrol inpu -Y of he CT-MFE is disabled when his funcion is seleced. B OFF-delay, wih auxiliary volage (Delay on break) CT-AHE, CT-MFE This funcion requires coninuous conrol supply volage for iming. Timing is conrolled by a conrol inpu, conneced o erminals -Y. If he conrol conac is closed, he oupu relay energizes. If conrol inpu -Y is opened, he seleced ime delay sars. When he ime delay is complee, he oupu relay de-energizes. If conrol inpu -Y closes before he ime delay is complee, he ime delay is rese. Timing sars again when he conrol inpu re-opens. -/B 5-8 5-6 red LED < 2CDC 252 30 F0205 - -Y 5-8 5-6 red LED 2CDC 252 32 F0205 = adjused ime delay = adjused ime delay Minimum conrol pulse lengh: 20 ms Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /22

CT-E range Funcion diagrams B OFF-delay, wihou auxiliary volage (rue delay on break) CT-ARE The OFF-delay funcion wihou auxiliary volage does no require conrol supply volage for iming. Applying conrol supply volage, energizes he oupu relay. If conrol supply volage is inerruped, he OFF-delay sars. When iming is complee, he oupu relay de-energizes. If conrol supply volage is re-applied, before he ime delay is complee, he ime delay is rese and he oupu relay remains energized. Conrol supply volage mus be applied for he minimum energizing ime (200 ms), for proper operaion. CA Impulse-ON (Inerval) CT-VWE, CT-MFE The oupu relay energizes immediaely when conrol supply volage is applied and de-energizes when he seleced ime delay is complee. If conrol supply volage is inerruped before he ime delay is complee, he oupu relay de-energizes and he ime delay is rese. The conrol inpu -Y of he CT-MFE has o be jumpered if his iming funcion is configured. CT-VWE: -/B 5-8 5-6 2CDC 252 33 F0205 -/B 5-8 5-6 LED grün LED ro < 2CDC 252 34 F005 = adjused ime delay = adjused pulse ime CT-MFE: - -Y 5-8 5-6 LED grün LED ro 2CDC 252 35 F005 < = adjused pulse ime CB Impulse-OFF, wihou auxiliary volage (True railing edge inerval) CT-AWE The Impulse-OFF funcion wihou auxiliary volage does no require conrol supply volage for iming. If conrol supply volage is inerruped, he oupu relay energizes and he OFF ime sars. When iming is complee, he oupu relay de-energizes. If conrol supply volage is re-applied, before he ime delay is complee, he ime delay is rese and he oupu relay de-energizes. Conrol supply volage mus be applied for he minimum energizing ime (200 ms), for proper operaion. CB Impulse-OFF, wih auxiliary volage (Trailing edge inerval) CT-AWE This funcion requires coninuous conrol supply volage. Opening conrol inpu -Y, energizes he oupu relay immediaely and iming begins. When he seleced ime delay is complee, he oupu relay de-energizes. Inerruping conrol supply volage or closing conrol inpu -Y, before he ime delay is complee, de-energizes he oupu relay and reses he ime delay. - 5-8 5-6 red LED 2CDC 252 38 F0205 - -Y 5-8 5-6 red LED 2CDC 252 37 F0205 = adjused pulse ime = adjused pulse ime /23 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-E range Funcion diagrams A Flasher saring wih ON (Recycling equal imes, ON firs) CT-MFE Applying conrol supply volage, sars iming wih symmerical ON & OFF imes. The cycle sars wih an ON ime firs. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. Conrol inpu -Y of he CT-MFE has o be open when his funcion is seleced. B Flasher saring wih OFF (Recycling equal imes, OFF firs) CT-EBE, CT-MFE Applying conrol supply volage, sars iming wih symmerical ON & OFF imes. The cycle sars wih an OFF ime firs. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. Conrol inpu -Y of he CT-MFE has o be jumpered when his funcion is seleced. CT-EBE: - -Y 5-8 5-6 LED grün LED ro 2CDC 252 026 F009 -/B 5-8 5-6 LED grün LED ro 2CDC 252 40 F005 = adjused flashing ime CT-MFE: = adjused flashing ime - -Y 5-8 5-6 LED grün LED ro 2CDC 252 023 F009 = adjused flashing ime H Pulse former (Single sho) CT-MFE Closing he conrol inpu conneced o erminals -Y, wih conrol supply volage applied, energizes he oupu relay for he seleced ON ime. When he ON ime is complee, he oupu relay de-energizes. Operaing he conrol inpu swich -Y during he ime delay has no effec. Afer he ime delay is complee, i can be resared by closing conrol inpu -Y. If conrol supply volage is inerruped during iming, he oupu relay deenergizes and he ON ime is rese. G Swiching relay CT-IRE The swiching relay may be used o increase he number of available conacs or o reinforce conacs, or as a coupling/decoupling inerface. Applying conrol supply volage, energizes he oupu relay. The oupu relay de-energizes if supply volage is inerruped. - -Y 5-8 5-6 red LED 2CDC 252 36 F0205-5-8 5-6 2CDC 252 45 F0205 = adjused pulse ime Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /24

CT-E range Funcion diagrams FA Sar-dela change-over CT-YDE Applying conrol supply volage, energizes he sar conacor (K) and he line conacor (K2) and begins he se saring ime. When he saring ime is complee, conac 5-6 de-energizes he sar conacor (K) Now, he fixed ransiion ime sars. When he ransiion ime is complee, conac 5-6 energizes he dela conacor (K3). SVC 0 000 F0390 -/B 5-8 5-6 red LED Sar conacor Dela conacor 2 2CDC 252 33 F0206 = adjusable saring ime 2 = fixed ransiion ime of 50 ms Conrol circui diagram L L2 L3 3 5 -F 2 4 6 2CDC 252 02 F0b07 -K2 2 3 4 5 6 -K3 2 3 4 5 6 -K 2 3 4 5 6 FC Sar-dela change-over CT-SDE Applying conrol supply volage, energizes he sar conacor (K) and he line conacor (K2) and begins he se saring ime. When he saring ime is complee, conac 5-6 de-energizes he sar conacor (K). Now, he fixed ransiion ime sars. When he ransiion ime is complee, conac 5-8 energizes he dela conacor (K3). -F2 3 5 2 4 6 W V U 97 95 98 96 -M M 3 ~ W2 V2 U2 Power circui diagram -/B 5-8 5-6 red LED Sar conacor 2CDC 252 34 F0206 SVC 0 000 F 0392 Dela conacor 2 = adjusable saring ime 2 = fixed ransiion ime of 30 ms Conrol circui diagram /25 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-E range Funcion diagrams Mulifuncion imer CT-MKE Funcions and ime ranges are programmed by simply plugging in exernal wire jumpers. A ON-delay (Delay on Make) Wihou exernal connecion. Timing begins when conrol supply volage is applied o erminal and he load conneced in series wih. When he seleced ime delay is complee, he load conneced o - energizes. If conrol supply volage is inerruped, he load de-energizes and he ime delay is rese. Inerruping conrol supply volage before he ime delay is complee, reses he ime delay. The load does no energize. - Thyrisor - red LED = adjused ime delay < 2CDC 252 46 F0205 CA Impulse-ON (Inerval) Exernal connecion X-X4 required. The load energizes and iming sars when conrol supply volage is applied o erminal and he load conneced in series wih. When he seleced ime delay is complee, he load de-energizes. Inerruping conrol supply volage before he ime delay is complee, de-energizes he load and reses he ime delay. - Thyrisor - red LED = adjused pulse ime < 2CDC 252 47 F0205 DA Flasher, saring wih ON Exernal connecion X-X4 and X2-X4 required. When conrol supply volage is applied o erminal and he load conneced in series wih, he load energizes and de-energizes wih he seleced ON & OFF imes. The ON & OFF imes are equal. The cycle sars wih an ON ime firs (load energized). If conrol supply volage is inerruped, he load de-energizes and he ime delay is rese. - Thyrisor - red LED = adjused flashing ime 2CDC 252 48 F0205 DB Flasher, saring wih OFF Exernal connecion X2-X4 required. When conrol supply volage is applied o erminal and he load conneced in series wih, he load energizes and deenergizes wih he seleced ON & OFF imes. The ON & OFF imes are equal. The cycle sars wih an OFF ime firs (load de-energized). If conrol supply volage is inerruped, he load de-energizes and he ime delay is rese. - Thyrisor - red LED = adjused flashing ime Programming he ime ranges X 3 -X 4 jumpered: 0,-0 s X 3 -X 4 open: 3-300 s 2CDC 252 49 F0205 A ON-delay (Delay on make) CT-EKE Timing begins when conrol supply volage is applied o erminal and he load conneced in series wih AL. When he seleced ime delay is complee, he load energizes. The glows as long as he load is energized. If conrol supply volage is inerruped, he load de-energizes and he ime delay is rese. Inerruping conrol supply volage before he ime delay is complee, reses he ime delay. The load does no energize. B OFF-delay, wih auxiliary volage (Delay on break) CT-AKE The OFF-delay funcion wih auxiliary volage requires coninuous conrol supply volage a erminal and he load conneced in series wih AL, for iming. Timing is conrolled by a conrol inpu, conneced o erminals Y2-. When he conrol inpu closes, he load energizes. If he conrol inpu opens, he seleced ime delay sars (minimum conrol pulse lengh is 20 ms). The glows as long as he load is energized. When he seleced ime delay is complee, he load de-energizes. If conrol inpu Y2- closes before he ime delay is complee, he ime delay is rese and he load remains energized. Timing sars again when he conrol inpu re-opens. Inerruping conrol supply volage reses he ime delay and de-energizes he load. -AL Thyrisor -AL < 2CDC 252 50 F0205 -AL Y-Y2 Thyrisor -AL 2CDC 252 5 F0205 = adjused ime delay = adjused ime delay Noice: CT-...KE are solid-sae imers wih hyrisor oupu for 2-wire applicaions. They are conneced direcly in series wih he conrol coil of conacors or relays. Volage should no be applied wihou a load conneced, because here is no curren limiing in he uni. Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /26

CT-E range Connecion diagrams CT-MFE A CT-ERE B CT-AHE ) B CT-ARE 5 5 Y 6 8 2CDC 252 52 F0005 5 B 5 6 8 B 2CDC 252 53 F0005 5 Y 5 6 8 2CDC 252 54 F0005 5 B 5 6 8 B 2CDC 252 55 F0005 6 8 6 8 6 8 6 8 - /DC -Y Conrol inpu 5-6/8 c/o conac - 220-240 V AC or 0-30 V AC -B 24 V AC/DC 5-6/8 c/o conac (+)-(-) 24 V AC/DC or 0-240 V AC or 220-240 V AC -Y Conrol inpu 5-6/8 c/o conac - 220-240 V AC or 0-30 V AC -B 24 V AC/DC 5-6/8 c/o conac CA CT-VWE CB CT-AWE CB CT-AWE ) DB CT-EBE 5 B 5 B 6 8 2CDC 252 56 F0b05 5 5 6 8 2CDC 252 57 F0b05 5 Y 5 6 8 2CDC 252 58 F0b05 5 B B 5 6 8 2CDC 252 59 F0005 6 8 6 8 6 8 6 8 Device wihou aux. volage Device wih aux. volage - -B 220-240 V AC or 0-30 V AC 24 V AC/DC (+)-(-) 24 V AC/DC or 0-240 V AC or 220-240 V AC - -Y 24 V AC/DC or 0-240 V AC or 220-240 V AC Conrol inpu - -B 220-240 V AC or 0-30 V AC 24 V AC/DC 5-6/8 c/o conac 5-6/8 c/o conac 5-6/8 c/o conac 5-6/8 c/o conac FAI CT-YDE FC CT-SDE FC CT-SDE G CT-IRE 5 B B 5 6 8 2CDC 252 60 F0005 5 B 5 B 6 8 2CDC 252 6 F0005 5 5 6 8 2CDC 252 62 F0005 2 4 2CDC 252 63 F0005 6 8 6 8 6 8 2 4 Device: SVR 550 27 R400 Devices: SVR 550 20 R400, SVR 550 22 R400 Supply erminals diagonally posiioned - -B 220-240 V AC or 0-30 V AC 24 V AC/DC - -B 220-240 V AC 24 V AC/DC - 0-30 V AC or 380-45 V AC - 24 V AC/DC or 220-240 V AC/DC 5-6/8 c/o conac 5-6/8 c/o conac 5-6/8 c/o conac -2/4 c/o conac G CT-IRE CT-MKE A CT-EKE B CT-AKE 2 4 2CDC 252 64 F0005 U X X2 2CDC 252 65 F0005 AL AL 2CDC 252 66 F0005 Y2 AL AL 2CDC 252 67 F0005 2 4 X3 X4 Y2 Supply erminals on one side of he device - 24 V AC/DC or 220-240 V AC/DC -2/4 c/o conac - - X-X4 /DC Thyrisor Timing funcion adjusmen -AL -AL /DC Thyrisor -AL -AL Y2- Thyrisor Conrol inpu X2-X4 Timing funcion adjusmen X3-X4 Time range adjusmen (Deails see funcion diagrams) ) Wiring noes /3 /27 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-E range Technical daa Technical daa Daa a T a = 25 C and raed values, unless oherwise indicaed CT-E (relays) CT-E (solid-sae) Inpu circui - Supply circui -, -AL /DC -, -AL Raed conrol supply volage U s - 0-30 V AC - - 220-240 V AC - - 380-45 V AC - -B 24 V AC/DC - Raed conrol supply volage U S olerance -5...+0 % Raed frequency AC/DC versions DC or 50/60 Hz AC versions 50/60 Hz /DC, approx..0-2.0 VA/W Typical curren / power consumpion 0-30 V AC, 220-240 V AC approx. 2.0 VA - 380-45 V AC approx. 3.0 VA - 24 V AC/DC approx..0 VA/W - 2 ma (24-60 V AC/DC) Curren consumpion while iming - 8 ma (60-240 V AC/DC) Inpu circui - Conrol circui Kind of riggering volage-relaed riggering - Conrol inpu, Conrol funcion -Y sar iming exernal - Parallel load / polarized no / yes ) - Minimum conrol pulse lengh 20 ms - Conrol volage poenial see raed conrol supply volage - Timing circui of 5 ime ranges per single funcion device 0.05- s / 0.-0 s / 0.3-30 s / 3-300 s / 0.3-30 min.) 0.05- s 2.) 0.5-0 s 3.) 5-00 s 4.) 50-000 s 8 ime ranges 0.05 s - 00 h (CT-MFE) 5.) 0.5-0 min 6.) 5-00 min Time ranges - 7.) 0.5-0 h 8.) 5-00 h 2 ime ranges 0.-300 s (CT-MKE) -.) 0.-0 s 2.) 3-300 s <50 ms Recovery ime CT-ARE: <200 ms CT-MKE: <00 ms CT-AWE, CT-SDE: <400 ms CT-AKE: <300 ms CT-YDE: <500 ms Accuracy wihin he raed conrol supply volage olerance i < 0.5 % / V Accuracy wihin he emperaure range i < 0. % / C CT-MFE: i <0.06 % / C - Repea accuracy (consan parameers) i < % Sar-dela ransiion ime CT-YDE / CT-SDE 50 ms / 30 ms - Minimum energizing ime CT-ARE 200 ms - Oupu circui Kind of oupu 5-6/8 Relay, c/o conac - -. -AL - Thyrisor Conac maerial AgCdO - Raed operaional volage U e VDE 00, IEC/EN 60947-250 V Maximum swiching volage 250 V AC, 250 V DC AC2 (resisive) a 230 V 4 A - Raed operaional curren I e AC5 (inducive) a 230 V 3 A - (IEC/EN 60947-5- ) AC5 (inducive) a 230 V 4 A - DC3 (inducive) a 24 V 2 A - ) CT-MFE: yes / no Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /28

CT-E range Technical daa AC raing (UL 508) CT-E (relays) CT-E (solid-sae) Uilizaion caegory (Conrol Circui Raing Code) B 300 - max. raed operaional volage 300 V AC - Maximum coninuous hermal curren a B300 5 A - max. making/breaking apparen power a B300 3600 VA / 360 VA - Mechanical lifeime 30 x 0 6 swiching cycles - Elecrical lifeime a AC2, 230 V, 4 A 0. x 0 6 swiching cycles - Max. fuse raing o achieve shor-circui n/c conac 0 A fas-acing, CT-ARE: 5 A - proecion (IEC/EN 60947-5-) n/o conac 0 A fas-acing, CT-ARE: 5 A - Minimum load curren - Maximum load curren - CT-MKE: 20 ma CT-EKE, CT-AKE: 0 ma CT-MKE: 0.8 A a Ta = 20 C CT-EKE, CT-AKE: 0.7 A Load curren reducion / Deraing - 0 ma/ C Maximum surge curren - CT-MKE: 20 A for 20 ms CT-EKE, CT-AKE: 5 A Volage drop in conneced sae - 3 V a 24 V AC - 220 m / 22 nf Cable lengh beween solid-sae imer and a 42 V AC - 00 m / 0 nf conneced load a 50 Hz and a cable capaciy of a 60 V AC - 65 m / 6.5 nf 00 pf/m : a 0 V AC - 50 m / 5 nf a 240 V AC - 22 m / 2.2 nf General daa Duy ime 00% Dimensions (W x H x D) 22.5 x 78.5 x 78 mm (0.886 x 3.09 x 3.07 in) Weigh approx. 80 g (0.76 lb) Mouning DIN rail (IEC/EN 6075) Mouning posiion any Minimum disance o oher unis horizonal / verical no / no Degree of proecion housing / erminals IP50 / IP20 Elecrical connecion fine-srand wih wire end ferrule 2 x 0.75-.5 mm2 (2 x 8-6 AWG) Wire size fine-srand wihou wire end ferrule 2 x -.5 mm2 (2 x 8-6 AWG) rigid 2 x 0.75-.5 mm2 (2 x 8-6 AWG) Sripping lengh 0 mm (0.39 in) Tighening orque 0.6-0.8 Nm Environmenal daa Ambien emperaure ranges operaion / sorage -20...+60 C / -40...+85 C Damp hea IEC 68-2-30 24 h cycles, 55 C, 93 % rel., 96 h Operaional reliabiliy IEC 68-2-6 6 g Mechanical resisance IEC 68-2-6 0 g Isolaion daa Raed impulse wihsand volage U imp beween all isolaed circuis VDE 00, IEC/EN 664 4 kv;.2/50 µs Polluion caegory VDE 00, IEC 664, IEC 255-5 III/C Overvolage caegory VDE 00, IEC 664, IEC 255-5 III/C Raed insulaion volage U i beween supply 300 V (supply up o 240 V) circui, conrol circui and oupu circui inpu circui / oupu circui 500 V (supply up o 440 V) Tes volage beween all isolaed circuis ype es 2.5 kv, 50 Hz, s Sandards Produc sandard IEC 682-, EN 682- +, DIN VDE 0435 Teil 202 Low Volage Direcive 2006/95/EC EMC Direcive 2004/08/EC Elecromagneic compaibiliy Inerference immuniy o IEC/EN 6000-6-2 elecronic discharge IEC/EN 6000-4-2 Level 3 (6 kv / 8 kv) radiaed, radio-frequency elecromagneic field IEC/EN 6000-4-3 Level 3 (0 V/m) elecrical fas ransien/burs IEC/EN 6000-4-4 Level 3 (2 kv / 5 khz) surge IEC/EN 6000-4-5 Level 3 (2 kv L-L) conduced disurbances, induced by radio-frequency fields IEC/EN 6000-4-6 Level 3 (0 V) Inerference emissions IEC/EN 6000-6-4 Approvals and Marks see page /4. /29 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-E range Technical diagrams Technical diagrams Load limi curves AC load (resisive) DC load (resisive) U V 300 200 00 80 60 50 40 30 20 2CDC 252 94 F0205 U V 300 200 00 80 60 50 40 30 20 2CDC 252 93 F0205 0 0, 0,2 0,5 2 4 6 0 0 0, 0,2 0,5 2 4 6 0 I A I A Deraing facor F for inducive AC load Conac lifeime F,0 0,9 0,8 0,7 0,6 0,5 0, 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9,0 cos ϕ 2CDC 252 92 F0205 0 6 9 8 N 5 4 3 2 0 5 220 V 50 Hz AC 360 cycles/h 2 3 4 5 6 7 8 I A 2CDC 252 034 F0208 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /30

CT-E range Wiring noes, Dimensional drawings Wiring noes for single-funcion devices wih conrol conac (CT-AHE, CT-AWE wih auxiliary volage) U I I Y I 2CDC 252 200 F0b05 U Y 2CDC 252 99 F0b05 I Y I 2CDC 252 98 F0b05 I U U Y 2CDC 252 20 F0b05 88,5 3.48 8 3.9 22,5.886 78 3.07 2CDC 252 89 F0b05 Dimensional drawing Dimensions in mm 78,5 3.09 /3 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-E range Noes Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /32

CT-S range Produc group picure /33 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-S range Table of Conens CT-S Range Produc group picure /33 Table of Conens /34 Benefis and advanages /35 Conversion able /36 Ordering deails /37 Ordering deails - Accessories /40 Funcion diagrams /4 Connecion diagrams /49 Technical daa /52 Technical diagrams /55 Wiring noes, Dimensional drawings /56 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /34

CT-S range Benefis and advanages Characerisics J J J Diversiy: J 8 mulifuncion imers J 3 single-funcion imers J 8 swiching relays Conrol supply volages: J Muli range: 24-48 V DC, J Wide range: /DC J Single range: 380-440 V AC Innovaive connecion echnology J Double-chamber cage connecion erminals J Easy Connec Technology Synonyms J J J J Devices wih: J or 2 c/o conacs J 2nd c/o conac can be seleced as insananeous conac ) J Remoe poeniomeer connecion ) J Conrol inpu wih vol-free or volage-relaed riggering e.g. o sar iming, pause iming J Exended operaing emperaure range down o -40 C ) Sealable ransparen cover for proecion agains unauhorized changes of ime values Inegraed marker label Approvals / Marks (parly pending) A, C, D, E, K / a, b ) seleced devices used expression alernaive expression(s) used expression alernaive expression(s) c/o conac SPDT volage-relaed we / non-floaing 2 c/o conacs DPDT vol-free dry / floaing Benefis Easy Connec Technology Tool-free wiring and excellen vibraion resisance. Push-in erminals provide connecion of wires up o 2 x 0,5 -,5 mm² (2 x 20-6 AWG), rigid or fine-srand wih or wihou wire end ferrules. Double-chamber cage connecion erminals 2 Double-chamber cage connecion erminals provide connecion of wires up o 2 x 0,5-2,5 mm² (2 x 20-4 AWG) rigid or fine-srand, wih or wihou wire end ferrules. Poenial disribuion does no require addiional erminals. Snap-On housing Tool-free DIN rail insallaion and deinsallaion of he Elecronic Timer wih Snap-On housing. Time range preselecion and fine adjusmen 3 Direc assignmen of he preseleced ime range o he fine adjusmen poeniomeer scale by mulicolor scales. LEDs for saus indicaion 4 All acual operaional saes are displayed by fron-face LED s, hus simplifying commissioning and roubleshooing. Inegraed marker label 5 Inegraed marker labels allow he produc o be marked quickly and simply. No addiional marker labels are required. Sealable ransparen cover 6 Proecion agains unauhorized changes of ime and hreshold values. Available as an accessory. 2 2CDC 253 026 F00 2CDC 253 025 F00 3 4 2CDC 253 035 F00 2CDC 253 035 F00 5 6 2CDC 255 006 S00 2CDC 253 037 F00 /35 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-S range Conversion able Previous Generaion Double-chamber cage connecion erminals New Generaion Easy Connec Technology SVR 630 00 R0200 CT-MFS.2 SVR 730 00 R0200 CT-MFS.2S SVR 740 00 R0200 CT-MFS.2P SVR 630 00 R3200 CT-MBS.22 SVR 730 00 R3200 CT-MBS.22S SVR 740 00 R3200 CT-MBS.22P SVR 630 020 R0200 CT-MVS.2 SVR 730 020 R0200 CT-MVS.2S SVR 740 020 R0200 CT-MVS.2P SVR 630 020 R300 CT-MVS.2 SVR 730 020 R300 CT-MVS.2S SVR 740 020 R300 CT-MVS.2P SVR 630 020 R3300 CT-MVS.22 SVR 730 020 R3300 CT-MVS.22S SVR 740 020 R3300 CT-MVS.22P SVR 630 02 R2300 CT-MVS.23 SVR 730 02 R2300 CT-MVS.23S SVR 740 02 R2300 CT-MVS.23P SVR 630 030 R3300 CT-MXS.22 SVR 730 030 R3300 CT-MXS.22S SVR 740 030 R3300 CT-MXS.22P SVR 630 040 R3300 CT-WBS.22 SVR 730 040 R3300 CT-WBS.22S SVR 740 040 R3300 CT-WBS.22P SVR 630 00 R0300 CT-ERS.2 SVR 730 00 R0300 CT-ERS.2S SVR 740 00 R0300 CT-ERS.2P SVR 630 00 R300 CT-ERS.2 SVR 730 00 R300 CT-ERS.2S SVR 740 00 R300 CT-ERS.2P SVR 630 00 R3300 CT-ERS.22 SVR 730 00 R3300 CT-ERS.22S SVR 740 00 R3300 CT-ERS.22P SVR 630 0 R3300 CT-AHS.22 SVR 730 0 R3300 CT-AHS.22S SVR 740 0 R3300 CT-AHS.22P SVR 630 20 R300 CT-ARS. SVR 730 20 R300 CT-ARS.S SVR 740 20 R300 CT-ARS.P SVR 630 20 R3300 CT-ARS.2 SVR 730 20 R3300 CT-ARS.2S SVR 740 20 R3300 CT-ARS.2P SVR 630 80 R0300 CT-APS.2 SVR 730 80 R0300 CT-APS.2S SVR 740 80 R0300 CT-APS.2P SVR 630 80 R300 CT-APS.2 SVR 730 80 R300 CT-APS.2S SVR 740 80 R300 CT-APS.2P SVR 630 80 R3300 CT-APS.22 SVR 730 80 R3300 CT-APS.22S SVR 740 80 R3300 CT-APS.22P SVR 630 20 R3300 CT-SDS.22 SVR 730 20 R3300 CT-SDS.22S SVR 740 20 R3300 CT-SDS.22P SVR 630 2 R2300 CT-SDS.23 SVR 730 2 R2300 CT-SDS.23S SVR 740 2 R2300 CT-SDS.23P ABB s elecronic imers in a new housing Benefis a a glance Double-chamber cage connecion erminals Easy conversion: The predecessor range of elecronic imers is replaced by an idenical range of elecronic imers wih double-chamber cage connecion erminals. The order code has changed in one digi only: SVRx changed o SVR7... Raings: Double-chamber cage connecion erminals provide connecion of wires up o x 0,5-4 mm² ( x 20-2 AWG) or 2 x 0,5-2,5 mm² (2 x 20-4 AWG) rigid or x 0,5-2,5 mm² ( x 20-4 AWG) / 2 x 0,5-,5 mm² (2 x 20-6 AWG), rigid or fine-srand, wih or wihou wire end ferrules. Poenial disribuion does no require addiional erminals. Exended ype designaors The references wih push-in erminals or screw erminals can be differeniaed easily by he exended ype designaor: CT-xxS.xxS indicaes he screw erminal CT-xxS.xxP indicaes he push-in erminal Easy Connec Technology New Opions: Addiionally o he exising well esablished screw connecions a new innovaive connecion echnology can be offered: Easy Connec Technology wih push-in erminals. Tool-Free Wiring: The push-in erminals can be wired wih rigid or fine-srand wires wih wire end ferrules oally ool-free. The connecion direcion is exacly he same as for he screw version. Higher uiliy class: The Easy Connec Technology provides excellen vibraion resisance wih gas igh push-in erminals he righ soluion for harsh environmen. Raings: Push-in erminals provide connecion of wires up o 2 x 0,5 -,5 mm² (2 x 20-6 AWG), rigid or fine-srand wih or wihou wire end ferrules. Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /36

CT-S range Ordering deails CT-MVS.2P 2CDC 25 024 V00 Descripion The highly sophisicaed CT-S range in ABB s new S-range housing offers wo differen ypes of connecion erminals and is ideally suied for universal use. Two differen connecion echnologies are available: J Double-chamber cage connecion erminals: J Easy Connec Technology: Accessories: The CT-S range offers he possibiliy of using accessories such as a remoe poeniomeer o adjus he ime delay or a sealable, ransparen cover o proec agains unauhorized changes. of ime and hreshold values. Ordering deails Time funcion Raed conrol supply volage Time ranges Conrol inpu Oupu Type Order code Price pce Weigh ( pce) kg (lb) CT-MBS.22P A(+) B CA CB AB DA DB DE FC H G FA ED EC CE DA DB AC BC 2CDC 25 023 V00 ON-delay (accumulaive) OFF-delay wihou aux. volage Impulse-ON Impulse-OFF Symmerical ON-delay and OFF-delay Flasher saring wih ON Flasher saring wih OFF Pulse generaor saring Sar-dela change-over wih impulse Pulse former ON/OFF-funcion Sar-dela change-over wice ON-delayed wih ON or OFF Pulse generaor saring wih ON or OFF Single-pulse generaor Impulse-ON/OFF Flasher saring wih ON Flasher saring wih OFF fixed impulse wih adjusable ime delay Adjusable impulse wih fixed ime delay A B AB CA CB DE FC H A+ G A B AB CA CB DE H A+ G AB ) CE ED A+ AC BC G A B AB CA CB DA DB FC H G 24-240 V AC/DC 2) 3) 4) 24-48 V DC, 380-440 V AC 24-48 V DC, 24-48 V DC, 5) 24-240 V AC/DC 2) 3) 4) 24-48 V DC, 3) 4) 0 (0.05 s- 300 h) 0 (0.05 s- 300 h) 2 x 0 (0.05 s- 300 h) 0 (0.05 s- 300 h) 0 (0.05 s- 300 h) ) Asymmerical ON- and OFF-delay 2) Exended emperaure range -40 C 3) Remoe poeniomeer connecion n n n n / n 2 c/o c/o 2 c/o 2 c/o 2 c/o CT-MVS.2S CT-MVS.2P CT-MVS.22S CT-MVS.22P CT-MVS.23S CT-MVS.23P CT-MVS.2S CT-MVS.2P CT-MXS.22S CT-MXS.22P CT-MFS.2S CT-MFS.2P CT-MBS.22S CT-MBS.22P SVR730020R0200 SVR740020R0200 SVR730020R3300 SVR740020R3300 SVR73002R2300 SVR74002R2300 SVR730020R300 SVR740020R300 SVR730030R3300 SVR740030R3300 SVR73000R0200 SVR74000R0200 SVR73000R3200 SVR74000R3200 n Conrol inpu wih volage-relaed riggering n Conrol inpu wih vol-free riggering 0.48 (0.326) 0.36 (0.300) 0.42 (0.33) 0.3 (0.289) 0.44 (0.37) 0.33 (0.293) 0.07 (0.236) 0.02 (0.225) 0.42 (0.33) 0.3 (0.289) 0.45 (0.320) 0.33 (0.293) 0.40 (0.309) 0.29 (0.284) 4) 2nd c/o conac selecable as insananeous conac 5) 2 remoe poeniomeer connecions /37 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-S range Ordering deails Time funcion Raed conrol supply volage Time ranges Conrol inpu Oupu Type Order code Price pce Weigh ( pce) kg (lb) CT-ERS.2P 2CDC 25 030 V00 A CA DA DB G AC BC 24-48 V DC, 0 (0.05 s- 300 h) 2 c/o CT-WBS.22S CT-WBS.22P SVR730040R3300 SVR740040R3300 0.23 (0.27) 0.5 (0.254) A(+) B CA DA DB G CE DA DB AC BC F CT-AHS.22P CT-SDS.23P 2CDC 25 033 V00 2CDC 25 040 V00 ON-delay (accumulaive) OFF-delay wihou aux. volage Impulse-ON Flasher saring wih ON Flasher saring wih OFF ON/OFF-funcion Impulse-ON/OFF Flasher saring wih ON Flasher saring wih OFF fixed impulse wih adjusable ime delay Adjusable impulse wih fixed ime delay Sar-dela change-over A B B 6) B 6) F 7) 24-240 V AC/DC 2) 24-48 V DC, 24-48 V DC, 24-240 V AC/DC 2) 24-48 V DC, 24-48 V DC, 24-240 V AC/DC 0 (0.05 s- 300 h) 0 (0.05 s- 300 h) 0 (0.05 s- 300 h) 7 (0.05 s- 0 min) n n 2 c/o c/o 2 c/o c/o 2 c/o c/o 2 c/o CT-ERS.2S CT-ERS.2P CT-ERS.22S CT-ERS.22P CT-ERS.2S CT-ERS.2P CT-APS.2S CT-APS.2P CT-APS.22S CT-APS.22P CT-APS.2S CT-APS.2P CT-AHS.22S CT-AHS.22P CT-ARS.S CT-ARS.P CT-ARS.2S CT-ARS.2P SVR73000R0300 SVR74000R0300 SVR73000R3300 SVR74000R3300 SVR73000R300 SVR74000R300 SVR73080R0300 SVR74080R0300 SVR73080R3300 SVR74080R3300 SVR73080R300 SVR74080R300 SVR7300R3300 SVR7400R3300 SVR73020R300 SVR74020R300 SVR73020R3300 SVR74020R3300 0-27 V AC or 0 V DC 8) CT-VBS.7 SVR43026R6000 200-240 V AC/DC 8) CT-VBS.8 SVR43026R5000 24-48 V DC, 380-440 V AC 7 (0.05 s- 0 min) 2 n/o CT-SDS.22S CT-SDS.22P CT-SDS.23S CT-SDS.23P SVR73020R3300 SVR74020R3300 SVR7302R2300 SVR7402R2300 0.30 (0.287) 0.2 (0.267) 0.2 (0.267) 0.3 (0.249) 0.06 (0.234) 0.0 (0.222) 0.46 (0.322) 0.25 (0.276) 0.38 (0.304) 0.27 (0.280) 0.09 (0.240) 0.03 (0.227) 0.36 (0.300) 0.25 (0.276) 0.06 (0.234) 0.00 (0.220) 0.24 (0.273) 0.5 (0.254) 0.23 (0.27) 0.8 (0.260) 0.4 (0.25) 0.08 (0.238) 0.8 (0.260) 0.2 (0.247) ) Asymmerical ON- and OFF-delay 2) Exended emperaure range -40 C 3) Remoe poeniomeer connecion 4) 2nd c/o conac selecable as insananeously conac 5) 2 remoe poeniomeer connecions 6) Wihou auxiliary volage 7) 50 ms ransiion ime 8) For DC conacor coils n Conrol inpu wih volage-relaed riggering n Conrol inpu wih vol-free riggering Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /38

CT-S range Ordering deails 2CDC 25 073 F0b07 2CDC 25 073 F0007 CT-IRS.35 G ON/OFF-funcion Time funcion G Raed conrol supply volage Time ranges Conrol inpu Oupu Type Order code Price 24 V AC/DC CT-IRS.6 SVR430220R900 0-240 V AC 2 c/o CT-IRS.4 SVR43022R700 24 V AC/DC CT-IRS.26 SVR430220R9300 0-240 V AC 24 V AC/DC 0-240 V AC 24 V AC/DC 220-240 V AC 2 c/o 3 c/o CT-IRS.24 CT-IRS.26G 9) CT-IRS.24G 9) CT-IRS.36 CT-IRS.35 SVR43022R7300 SVR430230R9300 SVR43023R7300 SVR430220R9400 SVR43022R400 pce Weigh ( pce) kg (lb) 0.2 (0.267) 0.26 (0.278) 0.35 (0.298) 0.4 (0.3) 0.47 (0.324) 0.50 (0.33) 0.59 (0.35) 0.6 (0.355) 9) Conacs wih gold-plaed conacs /39 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-S range Ordering deails - Accessories MT-x50B 2CDC 252 04 F0009 Remoe poeniomeer 50 kq ±20 % - 0,2 q, degree of proecion IP66 Maerial Diameer Type Order code Price Pack.- uni Weigh piece in mm piece pieces g / oz Plasic, black 22.5 MT-50B SFA640R506 0.040 Plasic, chrome 22.5 MT-250B SFA640R2506 0.040 Meal, chrome 22.5 MT-350B SFA640R3506 0.048 2CDC 252 042 F0009 CT-S ime relay Z Z3 Poeniomeers 30 mm adapers 2CDC 252 039 F0009 Z2 2CDC 252 040 F0209 2CDC 252 043 F0209 Noe: Technical specificaions see daa shee Noe: The connecions of he poeniomeer are no marked. Marker label 29.6 x 44.5 mm 30 mm adaper for aaching he poeniomeer 22 mm in 30 mm mouning hole Marker label wih scale 0-0 48.5 x 44.5 mm 2CDC 252 044 F0209 Maerial Type Order code Price piece Pack.- uni pieces Plasic, black K-8029 SFA66920R8029 Meal, chrome K-8030 SFA66920R8030 Weigh piece g / oz 6 2 9 3 0 5 8 2 24 27 30 Marker label wih scale 0-30 48.5 x 44.5 mm 2CDC 252 045 F0209 Marker label Capion Type Order code Price piece Pack.- uni Weigh piece pieces g / oz Symbol (see illusraion) SK 65 562-87 GJD655620R0087 0.002 Scale 0-0 SK 65 562-88 GJD655620R0088 0.002 Scale 0-30 M6-060 SFA6940R060 0.002 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /40

CT-S range Ordering deails - Accessories 4,5.77 ADP.0 2.70 22,5.886 62,5 60 2.46 2.36 7.275 3,5.38,5 0.453.394 22,5 2CDC 252 85 F0005.886 2CDC 252 87 F0005 Accessories Maerial for devices Type Order code Price piece Adaper for screw mouning ) Sealable ransparen cover Marker label CT-S 22.5 mm Pack.- uni Weigh piece pieces g / oz ADP.0 SVR430029R000 8.4/0.65 COV.0 SVR430005R000 5.2/0.8 Sealable CT-S.S/P 22.5 mm COV. SVR730005R000 4 / 0.29 ransparen cover ) 68,5 Maerial for devices Type Order code Price Pack.- uni Weigh piece COV.0 MAR.0 3 20.787 fron-o-back size 07 8.35 2CDC 252 86 F0005 Marker ) Marker Marker 8 0.32 22.5 0.89 4.8 0.9 68 2.68 ) also available for CT-S.S/P CT-S wihou DIP swiches CT-S wih DIP swiches CT-S.S/P wih DIP swiches pieces g / oz MAR.0 SVR36607R000 0 0.9/0.007 MAR.02 SVR430043R0000 0 0.3/0.005 MAR.2 SVR730006R0000 0 0.52/0.335 fron o back COV. 0.5 4.3 4T22 8 0.709 2 0.827 8 0.34 MAR.02 /4 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-S range Funcion diagrams Remarks Legend G Conrol supply volage no applied / Oupu conac open B Conrol supply volage applied / Oupu conac closed -Y/B Conrol inpu wih volage-relaed riggering Y-Z2 Conrol inpu wih vol-free riggering X-Z2 Conrol inpu wih vol-free riggering Terminal designaions on he device and in he diagrams: The s c/o conac is always designaed 5-6/8. The 2nd c/o conac is designaed 25-26/28, if i responds o he ime delay. If he 2nd c/o conac is seleced as an insananeous conac, he designaion 25-26/28 is replaced by 2-22/24. Conrol supply volage is always applied o erminals -. Remoe poeniomeer connecion: When an exernal poeniomeer is conneced o he remoe poeniomeer connecion (erminals Z-Z2, Z3-Z2 respecively), he inernal, fron-face poeniomeer is disabled and he ime adjusmen is made via he exernal poeniomeer. 2nd c/o conac selecable as insananeous conac: When swich posiion Ins. I is seleced, he funcionaliy of he 2nd c/o conac changes o an insananeous conac. I acs like he c/o conacs of a swiching relay, i.e. applying or inerruping he conrol supply volage energizes or de-energizes he c/o conac. The designaion of he 2nd c/o conac changes from 25-26/28 o 2-22/24, when seleced as insananeous conac. Funcion of he yellow LEDs: On devices wihou he funcion 2nd c/o conac selecable as insananeous conac, he yellow LED R glows as soon as he oupu relay energizes and urns off when he oupu relay de-energizes. Devices wih he funcion 2nd c/o conac selecable as insananeous conac have wo yellow LEDs, designaed R and R2. LED R shows he saus of he s c/o conac (5-6/8) and LED R2 shows he saus of he 2nd c/o conac (25-26/28, 2-22/24 resp.). LED R or R2 glow as soon as he corresponding oupu relay energizes and urns off when he corresponding oupu relay de-energizes. A ON-delay (Delay on make) CT-MVS, CT-ERS, CT-WBS This funcion requires coninuous conrol supply volage for iming. Timing begins when conrol supply volage is applied. The flashes during iming. When he seleced ime delay is complee, he oupu relay energizes and he flashing urns seady. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - 5-8, 25-28 5-6, 25-26 2-24 2-22 = adjused ime delay < 2CDC 252 07 F0206 A ON-delay (Delay on make) CT-MFS, CT-MBS This funcion requires coninuous conrol supply volage for iming. If conrol inpu Y-Z2 is open, iming begins when conrol supply volage is applied. Or, if conrol supply volage is already applied, opening conrol inpu Y-Z2 also sars iming. The flashes during iming. When he seleced ime delay is complee, he oupu relay energizes and he flashing urns seady. If conrol inpu Y-Z2 closes before he ime delay is complee, he ime delay is rese and he oupu relay remains de-energized. Pause iming / Accumulaive ON-delay (CT-MFS): Timing can be paused by closing conrol inpu X-Z2. The elapsed ime is sored and coninues from his ime value when X-Z2 is re-opened. This can be repeaed as ofen as required. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - Y-Z2 5-8, 25-28 5-6, 25-26 2-24 2-22 X-Z2 3 2 2CDC 252 08 F0206 = adjused ime delay + 2 = 3 = pause iming Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /42

CT-S range Funcion diagrams A+ Accumulaive ON-delay (Accumulaive delay on make) CT-MVS This funcion requires coninuous conrol supply volage for iming. Timing begins when conrol supply volage is applied. The flashes during iming. When he seleced ime delay is complee, he oupu relay energizes and he flashing urns seady. Timing can be paused by closing conrol inpu -Y/B. The elapsed ime is sored and coninues from his ime value when -Y/B is re-opened. This can be repeaed as ofen as required. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - -Y/B 5-8, 25-28 5-6, 25-26 2-24 2-22 = adjused ime delay 3 2 + 2 = 3 = pause iming 2CDC 252 043 F0206 B OFF-delay wih auxiliary volage (Delay on break) CT-MFS, CT-MBS, CT-AHS This funcion requires coninuous conrol supply volage for iming. If conrol inpu Y-Z2 is closed, he oupu relay energizes immediaely. If conrol inpu Y-Z2 is opened, he ime delay sars. The flashes during iming. When he seleced ime delay is complee, he oupu relay de- energizes and he flashing urns seady. If conrol inpu Y-Z2 closes before he ime delay is complee, he ime delay is rese and he oupu relay does no change sae. Timing sars again when conrol inpu Y-Z2 re-opens. Pause iming / Accumulaive OFF-delay (CT-MFS): Timing can be paused by closing conrol inpu X-Z2. The elapsed ime is sored and coninues from his ime value when X-Z2 is re-opened. This can be repeaed as ofen as required. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - Y-Z2 5-8, 25-28 5-6, 25-26 2-24 2-22 X-Z2 3 2 2CDC 252 09 F0206 = adjused ime delay + 2 = 3 = pause iming B OFF-delay wih auxiliary volage (Delay on break) CT-MVS, CT-APS This funcion requires coninuous conrol supply volage for iming. If conrol inpu -Y/B is closed, he oupu relay energizes immediaely. If conrol inpu -Y/B is opened, he ime delay sars. The green LED flashes during iming. When he seleced ime delay is complee, he oupu relay de-energizes and he flashing urns seady. If conrol inpu -Y/B recloses before he ime delay is complee, he ime delay is rese and he oupu relay does no change sae. Timing sars again when conrol inpu -Y/B re-opens. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. B OFF-delay wihou auxiliary volage (True delay on break) CT-ARS The OFF-delay funcion wihou auxiliary volage does no require coninuous conrol supply volage for iming. Afer a sorage ime of several monhs wihou any volage, a formaing ime of abou 5 minues is necessary. Applying conrol supply volage energizes he oupu relay immediaely. Applied conrol supply volage is displayed by he glowing. If conrol supply volage is inerruped, he OFF-delay sars and he LED urns off. When iming is complee, he oupu relay de-energizes. For correc operaion of he uni, i is necessary o complee he minimum energizing ime. As soon as iming sars, he LED urns off. - -Y/B 5-8, 25-28 5-6, 25-26 2-24 2-22 < 2CDC 252 020 F0206-5-8, 25-28 5-6, 25-26 = adjused ime delay 2CDC 252 02 F0206 = adjused ime delay /43 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-S range Funcion diagrams B OFF-delay wihou auxiliary volage for DC conacor coils CT-VBS The DC conacor coil conneced o he oupu is energized when conrol supply volage is applied. If conrol supply volage is disconneced, he DC conacor coil remains energized for a shor ime delay. This ime delay depends on he coil drop-ou volage and on he waage of he conacor coil. - +/2-3-4 ) +/2- ) 2 = OFF-delay (wihou jumper beween erminals 3 and 4 ) ) 2 = OFF-delay (wih jumper beween erminals 3 and 4 )) ) only for version 200-240 V AC 2CDC 252 045 F0206 200 200 20 Conacor coil drop-ou volage [V] 80 60 40 20 00 80 60 40 9 W 20 0 0 3 W 7 W 00 200 [ms] 300 400 2CDC 252 27 F0205 Conacor coil drop-ou volage [V] 80 60 40 20 00 80 60 40 20 0 0 9 W 7 W 3 W [s] 2 2CDC 252 28 F0205 Conacor coil drop-ou volage [V] 00 80 60 40 20 0 0 9 W 7 W 3 W [s] 2 2CDC 252 29 F0205 Time delay guideline values 200-240 V AC version wihou jumper 3/4 Time delay guideline values 200-240 V AC version wih jumper 3/4 Time delay guideline values 0-27 V AC version AB Symmerical ON-delay and OFF-delay (Symmerical delay on make and delay on break) CT-MFS, CT-MBS This funcion requires coninuous conrol supply volage for iming. Closing conrol inpu Y-Z2 sars he ON-delay. When iming is complee, he oupu relay energizes. Opening conrol inpu Y-Z2 sars he OFF-delay 2. Boh iming funcions are displayed by he flashing green LED. When he OFF-delay 2 is complee, he oupu relay de-energizes. If conrol inpu Y-Z2 opens before he ON-delay is complee, he ime delay is rese and he oupu relay remains de-energized. If conrol inpu Y-Z2 closes before he OFF-delay 2 is complee, he ime delay is rese and he oupu relay remains energized. Pause iming / Accumulaive, symmerical ON-delay and OFF-delay (CT- MFS): Timing can be paused by closing conrol inpu X-Z2. The elapsed ime a or 2a is sored and coninues from his ime value when X-Z2 is re-opened. This can be repeaed as ofen as required. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - Y-Z2 5-8, 25-28 5-6, 25-26 2-24 2-22 X-Z2 2 a 3 b 2a 3 2b 2CDC 252 022 F0206 AB Symmerical ON-delay and OFF-delay (Symmerical delay on make and delay on break) CT-MVS This funcion requires coninuous conrol supply volage for iming. Closing conrol inpu -Y/B sars he ON-delay. When iming is complee, he oupu relay energizes. Opening conrol inpu -Y/ B sars he OFF-delay 2. Boh iming funcions are displayed by he flashing. When he OFF-delay 2 is complee, he oupu relay de-energizes. If conrol inpu -Y/B opens before he ON-delay is complee, he ime delay is rese and he oupu relay remains de-energized. If conrol inpu -Y/B closes before he OFF-delay 2 is complee, he ime delay is rese and he oupu relay remains energized. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - -Y/B 5-8, 25-28 5-6, 25-26 2-24 2-22 = adjused ON-delay 2 = adjused OFF-delay = 2 2 < 2 2CDC 252 023 F0206 = adjused ON-delay 2 = adjused OFF-delay = 2 a + b = 2a + 2b = 2 3 = pause iming Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /44

CT-S range Funcion diagrams AB Asymmerical ON-delay and OFF-delay (Asymmerical delay on make and delay on break) CT-MXS This funcion requires coninuous conrol supply volage for iming. Closing conrol inpu -Y/B sars he ON-delay. When iming is complee, he oupu relay energizes. Opening conrol inpu -Y/B sars he OFF-delay 2. When he OFF-delay is complee, he oupu relay de-energizes. Boh iming funcions are displayed by he flashing green LED. The ON-delay and OFF-delay are independenly adjusable. If conrol inpu -Y/B opens before he ON-delay is complee (< ), he ime delay is rese and he oupu relay remains de-energized. If conrol inpu -Y/B closes before he OFF-delay is complee (< 2 ), he ime delay is rese and he oupu relay remains energized. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - -Y/B 5-8, 25-28 5-6, 25-26 2 < 2 2CDC 252 038 F0206 CA Impulse-ON (Inerval) CT-MVS, CT-WBS This funcion requires coninuous conrol supply volage for iming. The oupu relay energizes immediaely when conrol supply volage is applied and de-energizes afer he se pulse ime is complee. The green LED flashes during iming. When he seleced pulse ime is complee, he flashing urns seady. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - 5-8, 25-28 5-6, 25-26 2-24 2-22 = adjused pulse ime < 2CDC 252 024 F0206 = adjused ON-delay 2 = adjused OFF-delay and 2 independenly adjusable CA Impulse-ON (Inerval) CT-MFS, CT-MBS This funcion requires coninuous conrol supply volage for iming. The oupu relay energizes immediaely when conrol supply volage is applied and de-energizes afer he se pulse ime is complee. If conrol inpu Y-Z2 is open, iming begins when conrol supply volage is applied. Or, if conrol supply volage is already applied, opening conrol inpu Y-Z2 sars iming. The flashes during iming. When he seleced pulse ime is complee, he oupu relay de-energizes and he flashing urns seady. Closing conrol inpu Y-Z2, before he pulse ime is complee, deenergizes he oupu relay and reses he pulse ime. Pause iming / Accumulaive impulse-on (CT-MFS): Timing can be paused by closing conrol inpu X-Z2. The elapsed ime is sored and coninues from his ime value when X-Z2 is re-opened. This can be repeaed as ofen as required. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - Y-Z2 5-8, 25-28 5-6, 25-26 2-24 2-22 X-Z2 3 2 2CDC 252 025 F0206 CB Impulse-OFF wih auxiliary volage (Trailing edge inerval) CT-MFS, CT-MBS This funcion requires coninuous conrol supply volage for iming. If conrol supply volage is applied, opening conrol inpu Y-Z2 energizes he oupu relay immediaely and sars iming. The flashes during iming. When he seleced pulse ime is complee, he oupu relay de-energizes and he flashing urns seady. Closing conrol inpu Y-Z2, before he pulse ime is complee, deenergizes he oupu relay and reses he pulse ime. Pause iming / Accumulaive impulse-off (CT-MFS): Timing can be paused by closing conrol inpu X-Z2. The elapsed ime is sored and coninues from his ime value when X-Z2 is re-opened. This can be repeaed as ofen as required. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - Y-Z2 5-8, 25-28 5-6, 25-26 2-24 2-22 X-Z2 = adjused pulse ime 3 2 + 2 = 3 = pause iming 2CDC 252 026 F0206 = adjused pulse ime + 2 = 3 = pause iming /45 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-S range Funcion diagrams CB Impulse-OFF wih auxiliary volage (Trailing edge inerval) CT-MVS This funcion requires coninuous conrol supply volage for iming. If conrol supply volage is applied, opening conrol inpu -Y/B energizes he oupu relay immediaely and sars iming. The flashes during iming. When he seleced pulse ime is complee, he oupu relay de-energizes and he flashing urns seady. Closing conrol inpu -Y/B, before he pulse ime is complee, deenergizes he oupu relay and reses he pulse ime. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - -Y/B 5-8, 25-28 5-6, 25-26 2-24 2-22 = adjused pulse ime < 2CDC 252 027 F0206 CE Impulse-ON and impulse-off (Inerval and railing edge inerval) CT-MXS This funcion requires coninuous conrol supply volage for iming. If conrol supply volage is applied, closing conrol inpu -Y/B energizes he oupu relay immediaely and sars he pulse ime. The green LED flashes during iming. When is complee, he oupu relay de-energizes and he flashing urns seady. Re-opening conrol inpu -Y/B energizes he oupu relay immediaely and sars he pulse ime 2. The flashes during iming. When 2 is complee, he oupu relay de-energizes and he flashing urns seady. and 2 are independenly adjusable. If conrol inpu -Y/B changes sae before he pulse ime is complee, he oupu relay de-energizes and he pulse ime is rese. If conrol inpu -Y/B changes sae again, he inerruped pulse ime resars. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - -Y/B 5-8, 25-28 5-6, 25-26 2 < 2CDC 252 028 F0206 = adjused pulse ime 2 = adjused pulse ime 2 A Flasher, saring wih he ON ime (Recycling equal imes, ON firs) CT-WBS Applying conrol supply volage sars iming wih symmerical ON & OFF imes. The cycle sars wih an ON ime firs. The ON & OFF imes are displayed by he flashing, which flashes wice as fas during he OFF ime. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. B Flasher, saring wih he OFF ime (Recycling equal imes, OFF firs) CT-WBS Applying conrol supply volage sars iming wih symmerical ON & OFF imes. The cycle sars wih an OFF ime firs. The ON & OFF imes are displayed by he flashing, which flashes wice as fas during he OFF ime. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - 5-8, 25-28 5-6, 25-26 = adjused flashing ime 2CDC 252 029 F0206-5-8, 25-28 5-6, 25-26 = adjused flashing ime 2CDC 252 030 F0206 A Flasher wih rese, saring wih he ON ime (Recycling equal imes wih rese, ON firs) CT-MFS, CT-MBS Applying conrol supply volage sars iming wih symmerical ON & OFF imes. The cycle sars wih an ON ime firs. The ON & OFF imes are displayed by he flashing, which flashes wice as fas during he OFF ime. The ime delay can be rese by closing conrol inpu Y-Z2. Opening conrol inpu Y-Z2 sars he imer pulsing again wih symmerical ON & OFF imes. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. B Flasher wih rese, saring wih he OFF ime (Recycling equal imes wih rese, OFF firs) CT-MFS, CT-MBS Applying conrol supply volage sars iming wih symmerical ON & OFF imes. The cycle sars wih an OFF ime firs. The ON & OFF imes are displayed by he flashing, which flashes wice as fas during he OFF ime. The ime delay can be rese by closing conrol inpu Y-Z2. Opening conrol inpu Y-Z2 sars he imer pulsing again wih symmerical ON & OFF imes. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - Y-Z2 5-8, 25-28 5-6, 25-26 2-24 2-22 2CDC 252 03 F0206 - Y-Z2 5-8, 25-28 5-6, 25-26 2-24 2-22 2CDC 252 032 F0206 = adjused flashing ime = adjused flashing ime Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /46

CT-S range Funcion diagrams E Flasher, saring wih he ON or OFF ime (Recycling equal imes, ON or OFF firs) CT-MVS Applying conrol supply volage sars iming wih symmerical ON & OFF imes. The cycle sars wih an ON ime firs. Closing conrol inpu -Y/B, wih conrol supply volage applied, sars he cycle wih an OFF ime firs. The ON & OFF imes are displayed by he flashing, which flashes wice as fas during he OFF ime. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - -Y/B 5-8, 25-28 5-6, 25-26 2-24 2-22 = adjused flashing ime 2CDC 252 033 F0206 H Pulse former (Single sho) CT-MFS, CT-MBS This funcion requires coninuous conrol supply volage for iming. Closing conrol inpu Y-Z2 energizes he oupu relay immediaely and sars iming. Operaing he conrol conac swich Y-Z2 during he ime delay has no effec. The flashes during iming. When he seleced ON ime is complee, he oupu relay de-energizes and he flashing urns seady. Afer he ON ime is complee, i can be resared by closing conrol inpu Y-Z2. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - Y-Z2 5-8, 25-28 5-6, 25-26 2-24 2-22 = adjused pulse ime 2CDC 252 034 F0206 H Pulse former (Single sho) CT-MVS This funcion requires coninuous conrol supply volage for iming. Closing conrol inpu -Y/B energizes he oupu relay immediaely and sars iming. Operaing he conrol conac swich -Y/B during he ime delay has no effec. The flashes during iming. When he seleced ON ime is complee, he oupu relay de-energizes and he flashing urns seady. Afer he ON ime is complee, i can be resared by closing conrol inpu -Y/B. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. ED Pulse generaor, saring wih he ON or OFF ime (Recycling unequal imes, ON or OFF firs) CT-MXS This funcion requires coninuous conrol supply volage for iming. Applying conrol supply volage, wih open conrol inpu -Y/B, sars iming wih an ON ime 2 firs. Applying conrol supply volage, wih closed conrol inpu -Y/B, sars iming wih an OFF ime firs. The ON & OFF imes are displayed by he flashing, which flashes wice as fas during he OFF ime. The ON & OFF imes are independenly adjusable. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - -Y/B 5-8, 25-28 5-6, 25-26 2-24 2-22 = adjused pulse ime 2CDC 252 035 F0206 - -Y/B 5-8, 25-28 5-6, 25-26 2 2 = adjused OFF ime 2 = adjused ON ime 2CDC 252 075 F0207 /47 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-S range Funcion diagrams EC Single-pulse generaor, saring wih he OFF ime (Delay on make wih inerval oupu) CT-MXS This funcion requires coninuous conrol supply volage for iming. Applying conrol supply volage, or, if conrol supply volage is already applied, opening conrol inpu -Y/B energizes he oupu relay afer he OFF ime is complee. When he following ON ime 2 is complee, he oupu relay de-energizes. The ON & OFF imes are displayed by he flashing, which flashes wice as fas during he OFF ime. The ON & OFF imes are independenly adjusable. Closing conrol inpu -Y/B, wih conrol supply volage applied, deenergizes he oupu relay and reses he ime delay. If conrol supply volage is inerruped, he oupu relay de-energizes and he ime delay is rese. - -Y/B 5-8, 25-28 5-6, 25-26 2 2 2CDC 252 037 F0206 AC Fixed impulse wih adjusable ime delay (Delayed pulse oupu) CT-WBS This funcion requires coninuous conrol supply volage for iming. The ime delay sars when conrol supply volage is applied. The flashes during iming. When is complee, he oupu relay energizes for he fixed impulse ime 2 of 500 ms and he flashing green LED urns seady. If conrol supply volage is inerruped, he ime delay is rese. The oupu relay does no change sae. - 5-8, 25-28 5-6, 25-26 2 < = adjused ime delay 2 = pulse ime fixed 500 ms 2CDC 252 04 F0206 = adjused OFF ime 2 = adjused ON ime and 2 independenly adjusable BC Adjusable impulse wih fixed ime delay (Delayed Inerval) CT-WBS This funcion requires coninuous conrol supply volage for iming. Applying conrol supply volage sars he fixed ime delay 2 of 500 ms. When 2 is complee, he oupu relay energizes and he seleced pulse ime sars. The flashes during iming. When is complee, he oupu relay de-energizes and he flashing urns seady. If conrol supply volage is inerruped, he pulse ime is rese. The oupu relay does no change sae. - 5-8, 25-28 5-6, 25-26 2 2 < = adjused pulse ime 2 = ime delay fixed 500 ms 2CDC 252 042 F0206 G ON/OFF-Funcion CT-MFS, CT-MBS, CT-MVS, CT-MXS, CT-WBS This funcion is used for es purposes during commissioning and roubleshooing. If he seleced max. value of he ime range is smaller han 300 h (fronface poeniomeer Time secor 300 h), applying conrol supply volage energizes he oupu relay immediaely and he glows. Inerruping conrol supply volage, de-energizes he oupu relay. If he seleced max. value of he ime range is 300 h (fron-face poeniomeer Time secor = 300 h) and conrol supply volage is applied, he glows, bu he oupu relay does no energize. Time seings and operaing of he conrol inpus have no effec on he operaion. - 5-8, 25-28 5-6, 25-26 Time secor 300 h Time secor = 300 h 2CDC 252 044 F0206 G Swiching relays CT-IRS The swiching relay may be used o increase he number of available conacs or o reinforce conacs, or as a coupling/decoupling inerface. Approx. 0 ms afer applying conrol supply volage o erminals -, he oupu relay energizes. If conrol supply volage is inerruped, he oupu relay de-energizes. - n-n4 n-n2 n =, 2 or 3 2CDC 252 055 F0206 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /48

CT-S range Funcion diagrams FC Sar-dela change-over wih impulse funcion (Sar-dela saring, inerval/delay on make) CT-MFS, CT-MBS, CT-MVS.2x This funcion requires coninuous conrol supply volage for iming. Applying conrol supply volage o erminals -, energizes he sar conacor conneced o erminals 5-8 and begins he se saring ime. The flashes during iming. When he saring ime is complee, he firs c/o conac de-energizes he sar conacor. Now, he fixed ransiion ime 2 of 50 ms sars. When he ransiion ime is complee, he second c/o conac energizes he dela conacor conneced o erminals 25-28. The dela conacor remains energized as long as conrol supply volage is applied o he uni. L F3 F2 S 0 S2 I 95 96 2 22 3 K2 4 KT 53 54 5 8 25 28 K2 3 4 2CDC 252 29 F0b06 3 K 4-5-8 5-6 25-28 25-26 2 = adjused saring ime 2 = ransiion ime (50 ms) 2CDC 252 039 F0206 N KT 22 22 K3 2 K 2 K K3 K2 Y N Conrol circui diagram L L2 L3 3 5 -F 2 4 6 2CDC 252 02 F0b07 -K2 2 3 4 5 6 -K3 2 3 4 5 6 -K 2 3 4 5 6 F Sar-dela change-over (Sar-dela saring) CT-SDS This funcion requires coninuous conrol supply volage for iming. Applying conrol supply volage o erminals -, energizes he sar conacor conneced o erminals 7-8 and begins he se saring ime. The flashes during iming. When he saring ime is complee, he firs oupu conac de-energizes he sar conacor. Now, he fixed ransiion ime 2 of 50 ms sars. When he ransiion ime is complee, he second oupu conac energizes he dela conacor conneced o erminals 7-28. The dela conacor remains energized as long as conrol supply volage is applied o he uni. -F2 3 5 2 4 6 W V U 97 95 98 96 -M M 3 ~ W2 V2 U2 Power circui diagram - 7-8 7-28 2 = adjused saring ime 2 = ransiion ime (50 ms) 2CDC 252 040 F0206 L F3 F2 S 0 S2 I 95 96 2 22 3 4 K2 53 54 2CDC 252 28 F0b06 KT 7 8 7 28 K2 3 4 K 3 4 K3 22 2 K 22 2 N KT K K3 K2 Y N Conrol circui diagram /49 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-S range Connecion diagrams CT-MVS.2 CT-MVS.22 CT-MVS.23 CT-MVS.2 5 Y/B Z2 Y/ B 5 25 2 Z 25 2 6 8 26 28 22 24 28 24 26 22 8 6 2CDC 252 002 F0b06 Y/B 5 25 Y/ B 5 25 6 8 26 28 28 26 8 6 2CDC 252 003 F0b06 Y/B 5 25 Y/ B 5 25 6 8 26 28 28 26 8 6 2CDC 252 003 F0b06 5 Y/B Y/ B 5 6 8 8 6 2CDC 252 004 F0b06 - /DC 5-6/8. c/o conac 25-26/28 2. c/o conac 2-22/24 2. c/o conac as insananeous conac -Y/B Conrol inpu Z-Z2 Remoe poeniomeer connecion - 24-48 V DC or 5-6/8. c/o conac 25-26/28 2. c/o conac -Y/B Conrol inpu - 380-440 V AC 5-6/8. c/o conac 25-26/28 2. c/o conac -Y/B Conrol inpu - 24-48 V DC or 5-6/8. c/o conac -Y/B Conrol inpu CT-MXS.22 CT-MFS.2 CT-MBS.22 CT-WBS.22 Z3 5 Z2 25 Z Y/ B 5 25 6 8 26 28 28 26 Y/B 8 6 2CDC 252 005 F0b06 X 5 Z2 25 2 Z 25 5 2 6 8 26 28 22 24 28 24 26 22 Y 8 6 2CDC 252 006 F0b06 5 Z2 25 2 Z 25 5 2 6 8 26 28 22 24 28 24 26 22 Y 8 6 2CDC 252 007 F0b06 5 25 5 25 6 8 26 28 28 26 8 6 2CDC 252 008 F0b06-24-48 V DC or 5-6/8. c/o conac 25-26/28 2. c/o conac -Y/B Conrol inpu Z-Z2 Remoe poeniomeer connecion Z3-Z2 Remoe poeniomeer connecion - /DC 5-6/8. c/o conac 25-26/28 2. c/o conac 2-22/24 2. c/o conac as insananeous conac Y-Z2 Conrol inpu X-Z2 Conrol inpu Z-Z2 Remoe poeniomeer connecion - 24-48 V DC or 5-6/8. c/o conac 25-26/28 2. c/o conac 2-22/24 2. c/o conac as insananeous conac Y-Z2 Conrol inpu Z-Z2 Remoe poeniomeer connecion - 24-48 V DC or 5-6/8. c/o conac 25-26/28 2. c/o conac A CT-ERS.2 A CT-ERS.22 A CT-ERS.2 5 5 6 8 28 26 8 6 25 25 26 28 2CDC 252 009 F0b06 5 5 6 8 28 26 8 6 25 25 26 28 2CDC 252 009 F0b06 5 6 5 8 8 6 2CDC 252 00 F0b06 - /DC 5-6/8. c/o conac 25-26/28 2. c/o conac - 24-48 V DC or 5-6/8. c/o conac 25-26/28 2. c/o conac - 24-48 V DC or 5-6/8. c/o conac Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /50

CT-S range Connecion diagrams B CT-APS.2 B CT-APS.22 B CT-APS.2 B CT-AHS.22 Y/B 5 25 Y/ B 5 25 6 8 26 28 28 26 8 6 2CDC 252 0 F0b06 Y/B 5 25 Y/ B 5 25 6 8 26 28 28 26 8 6 2CDC 252 0 F0b06 Y/ B 5 Y/B 5 6 8 8 6 2CDC 252 02 F0b06 5 Z2 25 5 25 6 8 26 28 28 26 Y 8 6 2CDC 252 03 F0b06 - /DC 5-6/8. c/o conac 25-26/28 2. c/o conac - 24-48 V DC or 5-6/8. c/o conac 25-26/28 2. c/o conac - 24-48 V DC or 5-6/8. c/o conac - 24-48 V DC or 5-6/8. c/o conac 25-26/28 2. c/o conac -Y/B Conrol inpu -Y/B Conrol inpu -Y/B Conrol inpu Y-Z2 Conrol inpu B CT-ARS. B CT-ARS.2 B CT-VBS.7 B CT-VBS.8 5 5 6 8 8 6 2CDC 252 04 F0b06 5 25 5 25 6 8 26 28 28 26 8 6 2CDC 252 05 F0b06 + 2- + 2-2CDC 252 07 F0b05 3 4 + 3 4 2- + 2-2CDC 252 08 F0b05 - /DC 5-6/8. c/o conac - /DC 5-6/8. c/o conac 25-26/28 2. c/o conac - 0-27 V AC + - 2- Conacor coil - 200-240 V AC + - 2- Conacor coil 3-4 Jumper for seing he ime delay (see ime delay diagram) F CT-SDS.22 F CT-SDS.23 7 7 8 28 2CDC 252 06 F0b06 7 7 8 28 2CDC 252 06 F0b06 8 28 8 28-24-48 V DC or 7-8. n/o conac 7-28 2. n/o conac - 380-440 V AC 7-8. n/o conac 7-28 2. n/o conac /5 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-S range Connecion diagrams G CT-IRS.6 G CT-IRS.4 G CT-IRS.26 G CT-IRS.24 2 4 4 2 2CDC 252 23 F0b05 2 4 4 2 2CDC 252 23 F0b05 4 2 2 2 4 22 24 24 22 2 2CDC 252 24 F0b05 4 2 2 2 4 22 24 24 22 2 2CDC 252 24 F0b05-24 AC/DC - 0-240 V AC - 24 AC/DC - 0-240 V AC -2/4. c/o conac -2/4. c/o conac -2/4. c/o conac 2-22/24 2. c/o conac -2/4. c/o conac 2-22/24 2. c/o conac G CT-IRS.26G (gold-plaed con.) G CT-IRS.24G (gold-plaed con.) G CT-IRS.36 G CT-IRS.35 4 2 2 4 24 2 2 22 24 22 2CDC 252 25 F0b05 4 2 2 4 24 2 2 22 24 22 2CDC 252 25 F0b05 2 34 3 32 2 3 2 4 22 24 32 34 24 22 4 2 2CDC 252 035 F0b08 2 34 3 32 2 3 2 4 22 24 32 34 24 22 4 2 2CDC 252 035 F0b08-24 AC/DC - 0-240 V AC - 24 V AC/DC - 220-240 V AC -2/4. c/o conac 2-22/24 2. c/o conac -2/4. c/o conac 2-22/24 2. c/o conac -2/4. c/o conac 2-22/24 2. c/o conac 3-32/34 3. c/o conac -2/4. c/o conac 2-22/24 2. c/o conac 3-32/34 3. c/o conac Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /52

CT-S range Technical daa Daa a T a = 25 C and raed values, unless oherwise indicaed CT-S Inpu circui - Supply circui CT-xxx.x /DC CT-xxx.x2 24-48 V DC, CT-xxx.x3 380-440 V AC Raed conrol supply volage U s CT-xxx.x4 0-240 V AC CT-xxx.x5 220-240 V AC CT-xxx.x6 24 V AC/DC CT-xxx.x7 00-27 V AC or 0 V DC CT-xxx.x8 200-240V AC/DC Raed conrol supply volage U S olerance -5...+0 % Raed frequency DC or 50/60 Hz Frequency range AC 47-63 Hz Typical curren / power consumpion depending on device, see daa shee Power failure buffering ime 24 V DC min. 5 ms 230/400 V AC min. 20 ms Inpu circui - Conrol circui Kind of riggering CT-MVS, CT-MXS, CT-APS volage-relaed riggering Conrol inpu, Conrol funcion -Y sar iming exernal (CT-MVS, CT-MXS, CT-APS) Parallel load / polarized Maximum cable lengh o he conrol inpu Minimum conrol pulse lengh Conrol volage poenial yes / no 50 m - 00 pf/m 20 ms see raed conrol supply volage Curren consumpion of he conrol inpu 24 V DC.2 ma 230 V AC 8 ma 400 V AC 6 ma Kind of riggering CT-MFS, CT-MBS, CT-AHS vol-free riggering Conrol inpu, Conrol funcion Maximum swiching curren in he conrol circui Maximum cable lengh o he conrol inpu Minimum conrol pulse lengh No-load volage a he conrol inpus Remoe poeniomeer Remoe poeniomeer connecions, Resisance value Maximum cable lengh o remoe poeniomeer Shield connecion Timing circui Time ranges Recovery ime Accuracy wihin he raed conrol supply volage olerance Y-Z2 X-Z2 Z-Z2 Z3-Z2 0 ime ranges 0.05 s - 300 h 7 ime ranges 0.05 s - 0 min (CT-SDS, CT-ARS) sar iming exernal (CT-MFS, CT-MBS, CT-AHS) pause iming / accumulaive funcions (CT-MFS) ma 50 m - 00 pf/m 20 ms 0-40 V DC 50 kω (CT-MFS, CT-MBS, CT-MVS.2, CT-MXS) 50 kω (CT-MXS) 2 x 25 m, shielded wih 00 pf/m Z2.) 0.05- s 2.) 0.5-3 s 3.) 0.5-0 s 4.).5-30 s 5.) 5-00 s 6.) 5-300 s 7.).5-30 min 8.) 5-300 min 9.).5-30 h 0.) 5-300 h.) 0.05- s 2.) 0.5-3 s 3.) 0.5-0 s 4.).5-30 s 5.) 5-00 s 6.) 5-300 s 7.) 0.5-0 min /DC <50 ms 24-48 V DC, < 80 ms 380-440 V AC < 60 ms i < 0.004 % / V Accuracy wihin he emperaure range i < 0.03 % / C Repea accuracy (consan parameers) i < 0.2 % Sar-dela ransiion ime Sar-dela ransiion ime olerance Minimum energizing ime Formaing ime ) ) prior o firs commisioning and afer a six-monh sop in operaion fixed 50 ms (CT-SDS, CT-MBS, CT-MFS, CT-MVS.2x) ±2 ms 00 ms (CT-ARS) 5 min (CT-ARS) /53 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-S range Technical daa Indicaion of operaional saes Conrol supply volage / iming U/T: V: conrol supply volage applied / W: iming Conrol supply volage U: V: conrol supply volage applied Relay sae R, R, R2: yellow LED V: oupu relay energized (R, R, R2) Oupu circui 5-6/8 relay, c/o conac Kind of oupu 5-6/8; 25-26/28 relay, 2 c/o conacs 5-6/8; 25(2)-26(22)/28(24) relay, 2 c/o conacs, 2nd c/o conac selecable as ins. conac 7-8; 7-28 relay, 2 n/o conacs (CT-SDS) Conac maerial Cd-free, on reques Raed operaional volage U e IEC/EN 60947-250 V Minimum swiching volage / minimum swiching curren 2 V / 0 ma (CT-IRS.2xG: 0 mv / 0 μa) Maximum swiching volage / maximum swiching curren see load limi curves (CT-IRS.2xG: 0 V / 200 ma) AC2 (resisive) a 230 V 4 A Raed operaional curren I AC5 (inducive) a 230 V 3 A e (IEC/EN 60947-5- ) AC5 (inducive) a 230 V 4 A DC3 (inducive) a 24 V 2 A (CT-ARS;.5 A) Uilizaion caegory (Conrol Circui Raing Code) B 300 max. raed operaional volage 300 V AC AC raing (UL 508) Maximum coninuous hermal curren a B300 5 A max. making/breaking apparen power a B300 3600 VA / 360 VA Mechanical lifeime 30 x 0 6 swiching cycles Elecrical lifeime a AC2, 230 V, 4 A 0. x 0 6 swiching cycles Max. fuse raing o achieve shor-circui proecion n/c conac 6 A fas-acing (IEC/EN 60947-5-) n/o conac 0 A fas-acing General daa 2) MTBF on reques Duy ime 00% Dimensions (W x H x D) Weigh Mouning Mouning posiion produc dimensions packaging dimensions 22.5 x 85.6 x 03.7 mm (0.89 x 3.37 x 4.08 in) 97 x 09 x 30 mm (3.82 x 4.29 x.8 in) depending on device, see ordering deails DIN rail (IEC/EN 6075), snap-on mouning wihou any ool Minimum disance o oher unis verical / horizonal no necessary / no necessary Maerial of housing UL 94 V-0 Degree of proecion housing / erminals IP50 / IP20 Elecrical connecion 2) Wire size Sripping lengh fine-srand wih(ou) wire end ferrule rigid Screw connecion echnology x 0.5-2.5 mm 2 ( x 20-4 AWG) 2 x 0.5-.5 mm 2 (2 x 20-6 AWG) x 0.5-4 mm 2 ( x 20-2 AWG) 2 x 0.5-2.5 mm 2 (2 x 20-4 AWG) any 8 mm (0.32 in) Easy Connec Technology (Push-in) 2 x 0.5-.5 mm 2 (2 x 20-6 AWG) 2 x 0.5-.5 mm 2 (2 x 20-6 AWG) Tighening orque 0.6-0.8 Nm (5.3-7.08 lb.in) - 2) Daa for all references SVR 730 xxx xxx and SVR 740 xxx xxx. For devices wih SVR 430 xxx xxx and SVR 630 xxx xxx please refer o he daa shee. Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /54

CT-S range Technical daa Environmenal daa Ambien emperaure ranges operaion / sorage -25...+60 C / -40...+85 C, -40...+60 C / -40...+85 C (CT-MVS.2, CT-MFS.2, CT-ERS.2, CT-APS.2) Damp hea (cyclic) (IEC/EN 60068-2-30) 6 x 24 h cycle, 55 C, 95 % RH Vibraion, sinusoidal (IEC/EN 60068-2-6) funcioning 40 m/s 2, 0-58/60-50 Hz resisance 60 m/s2, 0-58/60-50 Hz, 20 cycles Vibraion, seismic (IEC/EN 60068-3-3) funcioning 20 m/s 2 Shock, half-sine (IEC/EN 60068-2-27) funcioning 00 m/s 2, ms, 3 shocks/direcion resisance 300 m/s 2, ms, 3 shocks/direcion Isolaion daa Raed insulaion volage U i inpu circui / oupu circui 500 V Raed impulse wihsand volage U imp beween all isolaed circuis VDE 00, IEC/EN 60664 4 kv;.2/50 μs Power-frequency wihsand volage es beween rouine es 2.0 kv, 50 Hz, s all isolaed circuis (es volage) ype es 2.5 kv, 50 Hz, min Basic insulaion (IEC/EN 640) inpu circui / oupu c ircui 500 V Proecive separaion (IEC/EN 640; IEC/EN 5078; VDE 006 par 0 and par 0/ ) inpu circui / oupu circui 250 V Polluion degree (IEC/EN 60664-, VDE 00) 3 Overvolage caegory (IEC/EN 60664-, VDE 0) III Sandards Produc sandard IEC 682-, EN 682- +, DIN VDE 0435 par 202 Low Volage Direcive 2006/95/EC EMC Direcive 2004/08/EC RoHS Direcive 2002/95/EC Elecromagneic compaibiliy Inerference immuniy o IEC/EN 6000-6-, IEC/EN 6000-6-2 elecronic discharge IEC/EN 6000-4-2 Level 3, 6 kv / 8 kv radiaed, radio-frequency elecromagneic field IEC/EN 6000-4-3 Level 3, 0 V/m ( GHz) 3 V/m (2 GHz) V/m (2.7 GHz) elecrical fas ransien / burs IEC/EN 6000-4-4 Level 3, 2 kv / 5 khz surge IEC/EN 6000-4-5 Level 4, 2 kv - conduced disurbances, induced by radio-frequency fields IEC/EN 6000-4-6 Level 3, 0 V harmonics and inerharmonics IEC/EN 6000-4-3 Level 3 Inerference emissions IEC/EN 6000-6-3, IEC/EN 6000-6-4 high-frequency radiaed IEC/CISPR 22, EN 55022 Class B high-frequency conduced IEC/CISPR 22, EN 55022 Class B Approvals and Marks see page /4. /55 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-S range Technical diagrams Technical diagrams Load limi curves AC load (resisive) DC load (resisive) AC volage [V] resisive load 2CDC 252 49 F0206 DC volage [V] resisive load 2CDC 252 50 F0206 AC curren [A] DC curren [A] Deraing facor F for inducive AC load Conac lifeime Deraing facor F.0 0.9 0.8 0.7 2CDC 252 24 F0206 Swiching cycles 250 V resisive load 2CDC 252 48 F0206 0.6 0.5 0. 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9.0 cos ϕ Swiching curren [A] Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /56

CT-S range Wiring noes, Dimensional drawings Wiring noes Conrol inpus (vol-free riggering) Triggering of he conrol inpus (vol-free) wih a proximiy swich (3 wire) L(+) X Y 2CDC 252 0 F0b06 L(+) +V Y 2CDC 252 05 F0b06 Z2 Z2 N(-) N(-) 0 V Conrol inpus (volage-relaed riggering) L(+) Y/B 2CDC 252 02 F0b06 L(+) Y/B L(+) 2CDC 252 03 F0b06 N(-) N(-) L(-) The conrol inpu Y/B is riggered wih elecric poenial agains. I is possible o use he conrol supply volage from erminal or any oher volage wihin he raed conrol supply volage range. Remoe poeniomeer L(+) Z3 Z 2CDC 252 04 F0b06 Z2 N(-) Dimensional drawing Dimensions in mm and inches 09,5 4.3 22,5.886 02 4.02 3.4 4.47 05.9 4.7 22.5 0.89 00 3.94 SVR 430 xxx xxx, SVR 630 xxx xxx 78 3.07 2CDC 252 88 F0b05 03.7 4.08 SVR 730 xxx xxx, SVR 740 xxx xxx 85.6 3.37 2CDC 252 009 F00 /57 Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com

CT-S range Noes Phone: 800.894.042 - Fax: 888.723.4773 - Web: www.clrwr.com - Email: info@clrwr.com /58