Display TIME SETTING A B C = /0 sec. J I H G D F E SET Chrono automatic A B D H E I C G F SET Retrograde A G C = / min. D E I H B F A: Minutes counter (60 minutes) A: minutes counter (60 minutes) A: Minutes counter (0 minutes) B: Seconds counter C: /0 second counter C: / minutes counter C: 6 minutes counter (6 hours) D: Push-button E: Crown F: Push-button G: Hours hand H: Seconds hand I: Minutes hand J: Light Function A: Normal position of the crown C: Position for setting the time To set the time, pull the crown out to posi-tion C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A. /6
DATE SETTING SPLIT TIME SET To set the date, pull the crown out to position B and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A. Press. The upper push-button to start the chronograph.. The lower push-button to read the intermediary time.. Once again to continue (repeat the las two actions as many times as you wish to read the intermediary time while the chrono carries on).. The upper push-button to stop finally.. The lower push-button to reset. /6
TIMing mode ADD FUNCTION STANDARD CHRONO AUTOMATIC STANDARD AUTOMATIC CHRONO START Press. The upper push-button to start the chronograph.. Once again to read the elapsed time.. The lower push-button to reset. Retrograde: The duration of timing is limited to hours. Press. The upper push-button to start.. The upper push-button to read the firs time.. The upper push-button to restart the chronograph.. The upper push-button to read the additional time (repeat these two steps as many time as you wish).. The lower push-button to reset. /6
TACHYMETER READJUSTMENT START 6 Measure the speed Base 00 or 000 m. Press.... The upper push-button when an action starts.. Once again to stop after a distance of 00 or 000 m. Read the speed indicated by the 60 seconds counter (Retrograde: 0 sec.) on the tachymeter scale (km/h = kph).. The lower push-button to reset.. Pull the crown to position B.. Press the upper button to reach the position h00 with the hand of the /0 seconds counter.. Press the lower button to reach the position h00 with the hand of the seconds.. Pull the crown to the position C.. Press the upper button to reach the position h00 with the hand of the minutes counters. 6. Press the crown to position A. /6
IRONY CHRONO MEDIUM 6 6. Pull the crown to position B.. Press the lower button to reach the position 0 with the hand of the minutes counter.. Press the crown to the position C.. Press the upper button to reach the position h00 with the hand of the seconds counter.. Press the lower button to reach the position 0 with the hand of the / minute counter. 6. Press the crown to position A.. Pull the crown to position B.. Press the lower button to reach the position h00 with the hand of the minutes counter.. Press the crown to the position C.. Press the upper button to reach the position h00 with the hand of the seconds counter.. Press the lower button to reach the position h00 with the hand of the /0 sec. counter. 6. Press the crown to position A. /6
SKIN CHRONO P P P P P P P P P P. Simultaneously P + P until A, B and C complete the cycle.. P. A completes a whole cycle.. P to align A.. P again, and B completes a whole cycle.. P to align B. 6. P again, and C completes a whole cycle. 7. P to align C. 8. Simultaneously P + P again, to com plete the readjustment process. The watch will acknowledge this procedure with a revolution on all displays. If P + P are not pressed within seconds, the watch will carry out the acknowledgement function automatically. 6/6