BONDING, SEALING, LUBRICATION, PROTECTION CAF /PASTES AND GREASES/PRIMERS

BONDING, SEALING, LUBRICATION, PROTECTION CAF /PASTES AND GREASES/PRIMERS Bluestar Silicoes. Deliverig Your Potetial.

SILICONES TECHNOLOGY FOR SEALING, LUBRICATION AND INDUSTRIAL BONDING Reowed expertise O the stregth of 50 years experiece i silicoes techology, Bluestar Silicoes offers it s idustrial customers a extesive rage of products to meet their icreasigly demadig requiremets, both i terms of performace ad reliability, as well as value for moey. Iovatio strategy based o partership ad cross-fertilizatio of techologies Bluestar Silicoes has set itself the missio of workig with it s parter customers to develop tailor-made solutios with them whose give the best possible respose to their fuctioal requiremets. Besides its expertise i silicoes techology, Bluestar Silicoes gives its customers access to all the other techologies ad expertise i the Bluestar Group. Silicoes... A surprisig material Macromolecules with ulimited structural Silicoes have a chemical structure that is based o alteratig atoms of silico ad oxyge. The origiality of silicoes compared with atural silica resides i the fact that the silico atoms i silicoes carry orgaic groups that cotai carbo. Accordig to the ature of these orgaic groups ad productio ad formulatio coditios, the products obtaied are extremely varied: their fial texture ca be fluid, viscous or pasty, elastomeric or rigid. Betwee mieral ad plastic Silicoes are differet from other orgaic polymers, ad otably plastics, due to the presece of silico, a semi-mieral elemet, ad their Si-O- bod. The bods that the silico creates with the oxyge to form the backboe of macromolecules are exceptioally stable: they are much more difficult to break tha carbocarbo bods i orgaic polymers. Stable, high-performace polymers Silicoes outperform most other polymers: their remarkable spreadability combied with outstadig resistace to extreme temperatures, UV ad IR radiatio as well as to may other outside factors, place them amog the best performig polymers available.

PERFORMANCE, RELIABILITY, REAL COST EFFECTIVENESS Rages tailored to meet your eeds Room temperature Vulcaizig Elastomers Oe-compoet RTV-1 CAF Accelerated RTV-1: CAF AXAD Pastes ad greases Adhesio primers Fuctios Assembly/bodig Sealig Electrical isulatio Lubricatio Dampig / Ati-vibratio Thermal protectio Properties Modular from adhesio through to release. Resistace to automotive oils ad fluids over a wide temperature rage. Easy spreadig. Outstadig stability of dielectric over a wide temperature rage. Over a wide rage of temperatures. Dampig ad reboud resiliece. Resistace over a wide temperature rage. Techical service adapted to the most demadig markets From product approval to after-sales techical service, icludig prototype productio With very high-performace equipmet ad uique kow-how, our teams ca validate the techical solutio i the laboratory i terms of all idustrial issues of bodig, sealig ad lubricatio before testig o-site with your teams ad determiig the optimal solutio with a view to fial approval. Before ay idustrial lauch, limited prototype series ca be produced iterally by our techical laboratories or i cooperatio with a applicatio robot maufacturer. Our techicias ca the provide service to our customers to give them the assistace ad advice they eed throughout the productio phase. A team of experts at your service, backed up by a specialist distributor etwork Bluestar Silicoes is a team of silicoes experts backed up by a specialist distributio etwork that is regularly traied i the latest iovatios i this field, listeig to your eeds o a day-to-day basis, by your side to provide the best techical ad ecoomic bodig, sealig ad lubricatio solutios.

PERMANENTLY COMMITTED BY YOUR SIDES Safety, protectio of health ad the eviromet Our Health, Safety ad Eviromet policy is oe of the foudatios of idustrial excellece. It is based o a high-performace maagemet system combiig trasport of hazardous materials with safety, evirometal ad idustrial health aspects. This system eables us to record the results i Bluestar Silicoes Iteratioal, cofirmig our place amog the top chemicals groups worldwide i terms of safety. Preset throughout the world With productio sites spread over three cotiets (Europe, America ad Asia) ad a worldwide logistics chai, Bluestar Silicoes ca provide quality products ad services throughout the world, stable i terms of performace ad adaptable to each applicatio. Quality assurace worldwide Bluestar Silicoes rolls out its quality policy accordig to the ISO 9001 V 8 stadard backed up by a maagemet system associated with a cotiuous progress approach. Lea Maufacturig tools ad the Six Sigma methodology are used i this respect for our mai product lies. Our worldwide etities (headquarters, laboratories or R&D activities, sales offices ad productio sites) are all certified to ISO 9001 V 8.

BLUESTAR SILICONES PASTES AND GREASES A WIDE RANGE OF PRODUCTS FOR YOUR APPLICATIONS Coverig a very wide rage of viscosities, Bluestar Silicoes Pastes ad Greases are ideal for a host of techical applicatios: from extreme temperature lubricatio or lubricatio i cotact with oxyge, to protectio of oil rig probes, ad icludig high voltage electrical isulatio. Automotive Lubricatig devices ad vehicles exposed to cold ad hot coditios: gearboxes, starter uits, etc. Heat protectio ad evacuatio: high thermal coductivity pastes: alterators. Domestic appliaces Lubricatig movig metal parts. Electrical distributio Protective paste for high voltage glass ad ceramic isulators ad lightig surge arresters. Protectio of circuit breakers, cable eds ad electrical distributio accessories i idustrial atmospheres or harsh climatic coditios. Oil extractio Protectio of oil rig probes. Lubricatig of valves, gears ad mechaical assemblies. Aeroautics Lubricatig devices susceptible to mechaical impacts ad subject to extreme coditios. Geeral idustry Lubricatig water distributio circuit valves. Lubricatig domestic ad idustrial tap work. Lubricatig smaller assemblies or mechaisms (plastic/plastic, plastic/metal): plastic gears, pis, video cassettes, etc. Ati-seizig (productio lie ad maiteace).

PASTES AND GREASES APPLICATIONS Past 4 Past 5 Past 7 Past 340 Past 408 Past B431 Past 90 Silbioe Past 70428 Electrical isulatio l l Thermal dissipatio Protectio Lubricatio Humidity Corrosio Geeral purpose Extreme temperatures: Cold Extreme temperatures: Hot Vacuum Rubber swellig Tap release applicatios Potable water Idustrial water Food cotact Sealig Demoldig l Casigs Optic cables: lad For detailed commercial cotacts please visit our website: www.bluestarsilicoes.com Recommeded product l Other possible usage PROPERTIES Past 4 Past 5 Past 7 Past 340 Past 408 Past B431 Past 90 Silbioe Past 70428 Color Traslucet to whitish White Traslucet to whitish Specific gravity at 25 C 1.00 1.00 1.00 2.20 1.01 1.10 1.00 1.10 Worked preparatio (mm/10) (1) < 260 < 250 < 350 280 280 390 310 430 Physical Rested preparatio (mm/10) (1) 210 260 270 270 370 290 400 Exudatio (%) (2) < 6 < 7 < 10 < 1.5 < 0.5 - < 1 < 0.5 Evaporatio (%) (2) < 2 < 3 < 5 < 1.5 < 3 < 3 < 1 < 3 Drip poit ( C) (3) - - - - - - > 250 - Thermal Service temperatures ( C) - 60 to + - 50 to + Thermal coductivity at 25 C (W/mK) 0.21-0.21 0.52 0.19 0.25 - - Dielectric stregth (kv/mm) (4) > 20 > 20 - > 15 > 20 > 20 - > 20 Dielectric Dielectric costat at 1 khz (5) 2.6 2.9-3.5 2.5 2.6-2.8 Dissipatio factor at 1 khz (5) 5.0.10-4 2.5.10-3 - 5.0.10-3 3.0.10-3 2.0.10-3 - 5.0.10-3 Trasversal resistivity (Ω.cm) (6) > 1.10 13 > 1.10 13 - > 1.10 13 > 1.10 13 > 1.10 13 - - Storage Shelf life from the productio date (moths) 36 36 36 18 36 36 36 36 (1) T 6012, ASTM D 217, DIN 51804 (2) After 24 h at C (3) ASTMD 566 (4) C 26225, ASTM D419, IEC 243 (5) C 26230, ASTM D150, IEC 250 (6) C, ASTM D257, IEC 93

Tap GRS Vacuum GRS GRS 33 GRS 44 GRS 55 BLUESTAR SILICONES PASTES AND GREASES: CHOOSING PERFORMANCE O the stregth of their mixed mieral ad orgaic origi, Bluestar Silicoes Pastes ad Greases feature a rage of outstadig : Stability over time ad over a wide rage of operatig temperatures (from - 60 C to + C). Outstadigly chemically iert: resistace to oxidatio ad chemical agets as well as atural ageig (UV, weatherig, ozoe, etc.). Very hydrophobic (resistat to weatherig). Ad more precisely: For pastes Very good dielectric characteristics givig outstadig electrical isulatio. Excellet protectio agaist corrosive atmospheres ad coductive or abrasive dusts. High level of release. For greases Good lubricatig power i a wide rage of temperatures. Resistace to oxidatio ad corrosio. Good wash-out resistace. Very high drip poit. Tap GRS Vacuum GRS Traslucet to whitish GRS 33 GRS 44 GRS 55 Brow Bluestar Silicoes Pastes ad Greases are sold i various packs icludig tubes, 1 kg - 5 kg - 25 kg tis, ad kg drums. As for all of our products, our direct sales etwork, backed up by our local specialist distributors, provides high-performace services. 1.00 1.00 1.03 1.05 1.00 220 280 260 280 190 250 250 270 < 8 < 0.5 < 4 to 150 C < 2 to 150 C < 5 to 100 C < 3 < 2 < 3 to 150 C < 4 to 150 C < 2.5 to 100 C - - 210 205 205-70 to + 180-65 to + 175 - - - - - - - - - - - - - - - - - - - - - - - - - 36 36 18 18 18

BLUESTAR SILICONES ADHESION PRIMERS THE PRIMER RANGE The Bluestar Silicoes Primer rage is made up of a series of surface treatmets desiged to allow Bluestar Silicoes Elastomers to achieve optimal adhesio to may differet surfaces. Bluestar Silicoes Primers are products i solutio form that dry i air, cotaiig a siloxae that reacts with atmospheric humidity. Advatages Whe used with Bluestar Silicoes Elastomers, the primers have the followig advatages: Optimizig RTV adhesio o a wide variety of surfaces. Polar plastics: polyamide, polycarboate, ABS, etc. Composite materials, glass fibre, epoxy resi. Alumium. Polished or upolished stailess steel. Paited, zic-plated, chrome-plated steel. Quickly develop good surface adhesio. It is essetial for all surfaces to be clea, dry ad free from ay cotamiats before applyig a primer or a RTV. Recommedatios Processig is particularly easy, sice Bluestar Silicoes Primers are delivered ready-to-use. I all cases they must be applied to perfectly clea ad dry surfaces. Bluestar Silicoes Primers are applied with a dry cloth or a fiber pad i a thi ad uiform coat. After applyig Bluestar Silicoes Primers, it is recommeded to leave a miimum amout of dryig time before applyig the elastomer o the primered surfaced. A maximum waitig time before applyig the elastomer must also be complied with (see table o the other side of the techical data sheet). To avoid ay problems with hydrolysis, it is recommeded ot to leave the ti of primer i cotact with atmospheric humidity by closig the cotaier after each applicatio.

RANGE Bluesil TM Prim 131 Bluesil TM Prim PM820/PM820 UVT* Bluesil TM Prim PM824 Bluesil TM Prim 10073 Mai Characteristics Metallic powder coatig & substrates, stailess steel, alumiium, Z or Cr plated steel Metallic substrates Plastic substrates (ABS, PA, PC ) Paited steel, epoxy/pes powder coatigs, metallic substrates Alumiium, stailess steel, zic ad alloys, PES powder coatig, fluoriated resi based substrates Product Category Liquid Liquid Liquid Liquid Colour Trasparet Light Yellow, Trasparet Trasparet Trasparet Specific gravity at 25 C approx. Viscosity at 25 C, mm 2 /s, Approx. FLASH POINT, C, approx. 0.79 0.75 0.82 0.8 3 < 0.5 1 2.5 12-26 27 12 Diluet Aliphatic hydrocarbos Aliphatic hydrocarbos Aliphatic hydrocarbos Isopropyl alcohol Solvet Isopropyl alcohol Aliphatic hydrocarbos hydrotreated light aphta Octamethyltrisiloxae Isopropyl alcohol Miimum dryig time 1 mi 1 mi 15 mi 15 mi Maximum dryig time before elastomer apl. 6 hours 6 hours 6 hours 3 hours Shelf life/packagig 24 moths / 0.8 kg 12 moths / 0.75 kg 18 moths / 0.4 kg 18 moths / 0.8 kg *PM820 UVT: adhesio promoter PM820 is available cotaiig a UV tracer (UVT) to visualize areas where primer has bee applied. Bluestar Silicoes Primers are sold i 0.4 kg to 0.8 kg cas. As for all of our products, our direct sales etwork, backed up by our local specialist distributors, allows us to provide a high-performace service. For specific techical recommedatios, please cotact your Sealig ad Bodig Customer Service Laboratory.

BLUESTAR SILICONES CAF PRODUCTS SEVERAL PRODUCT RANGES TO MEET YOUR NEEDS CAF products (also called RTV-1 products) are oe-compoet, silicoe elastomers that cure at room temperature at various rates. Acetoxy, oxime or alkoxy-type, CAF products have various viscosities ragig from fluid products to thixotropic ad icludig a self-levelig versio. They provide outstadig mechaical ad adhesio over wide temperature rages (from -70 C to +350 C accordig to the product) ad very good resistace to atural ageig (UV, weatherig, salt mist). Acetoxy, CAF products ca be accelerated by addig a activator to give very rapid settig rates: products i the CAF AXAD rage. Idustrial ad professioal rage Assembly ad repair o automated idustrial productio lies. Sealig/bodig for mass productio applicatios requirig high service levels (occasioal or prologed cotact with chemicals ad lubricats, temperature differeces, etc.) makig automated processig possible. Supplies for professioals (istallers, assemblers, heatig egieers, electricias, mechaics, geeral professioals ad specifically i the reovatio busiess). Geeral assembly providig sealig, ati-vibratio, bodig, dampig, etc. Maiteace rage Maiteace of idustrial sites or off-shore platforms. Repair/maiteace of air, rail, maritime fleets. Automotive repair for professioals ad cosumers. Protectio, coatig ad pottig rage Isulatio, coatig, pottig ad sealig of electrical ad electroic assemblies. High-performace assembly ad protectio rage Sealig, bodig ad protectig assemblies subject to high costraits i terms of adhesio, temperature ad/or corrosio ad UV resistace. CAF products i the Bluestar Silicoes rage, high-performace products with may advatages Outstadig bodig o a wide variety of surfaces (glass, metal ad plastics). Very easy to use i substitutio applicatios or to supplemet traditioal pre-formed joits. Competitive cost (materials costs, limited processig ad storage costs, etc.). Outstadig heat stability over a wide temperature rage (- 70 C to + 350 C). Very good atural ageig resistace: log-lastig mechaical (sealig joits ad very log-lastig flexible bodig applicatios). High isulatig ad thermal protectio capacity. Good dielectric. Very chemically iert.

CAF PROPERTIES Idustrial ad professioal rage CAF 22 OX CAF 30 CAF 1 Extra fluid CAF 4 CAF 33 CAF 44 CAF 5661 CAF 5662 CAF 520 Product category No-flowig, self eutral Noflowig, Flowable Selflevellig, Noflowig, No-flowig Noflowig, No-flowig, self-, eutral Mai characteristics Elogatio Quicksettig Fluid, heat stability, quicksettig Mechaical Heat stability, chemical resistaces High mechaical ad fluid resistace High hardess ad heat stability Fast kietics ad good adhesio Color Tras-black Whitetras-black Red Off-white Whitetras-black Grey Ivoryblack Tras-white Cure-type Oxime Acetoxy Acetoxy Acetoxy Acetoxy Acetoxy Acetoxy Alkoxy Properties before curig Specific gravity at 25 C (1) 1.03 1.04 1.10 1.16 1.04 1.03 1.14/1.12 1.02 Viscosity (MPa.s) (2) - - 7 500 250 000 - - - - Extrusio (g/mi) (3) 80 40 - - 50 170 100/120 50 Flowability (4) < 2 mm < 2 mm - 4 mm < 2 mm < 1 mm < 5 mm < 3 mm Cured compoud Ski formatio time (mi) Settig time for a 2 mm thickess (h) Cured thickess after 24 h (mm) 8 6 7 10 6 7 6 5 to 8 8 6 6 5 6 8 7 7 3.6 4.2 4.3 4.5 4.3 4 4 4 Shore A hardess for 6 mm thick sectio 20 20 54 37 25 38 55 15 (poits) (6) Secat modulus for 100% elogatio (MPa) (7) 0.45 0.6 2.2 0.8 0.6 1.9 3.3/2.5 0.3 Mechaical after curig (7 days) Tesile stregth (MPa) (7) 1.5 2.2 3 3.8 2.5 2.9 5.8/5 1.1 Elogatio at break (%) (7) 450 500 110 290 500 280 /220 500 Tear stregth (kn/m) (8) 4 5 4 4.5 5.4 7 10 - Lap shear stregth (MPa) (9) 1 1.5 1 1.2 1.4 1.1 2.5 0.7 Physical after curig Storage Type of failure CF (cohesive failure) / AF ( failure) Lower service temperature ( C) Maximum cotiuous service temperature, 1000 h ( C) Maximum peak service temperature, 72 h ( C) Shelf life from the productio date (moths) CF CF AF CF CF AF CF CF - 55-60 - 65-65 - 65-60 - 65-60 250 250 225 250 250 150 250 300 (black) 275 250 300 (black) 250 300 150 18 24 24 24 24 24 18 12

CAF PROPERTIES High-performace assembly ad protectio CAF 505 CAF 510 CAF 530 CAF 50 CAF 8 CAF 36 CAF FR 55 CAF 5552S Product category No-flowig, self-, eutral No-flowig, No-flowig, self-, Self-, eutral eutral Flowig, No-flowig, No-flowig, self-, eutral No-flowig, self-, eutral Mai characteristics High elogatio Quick curig ad high mechaical Good adhesio ad mechaical High heat stability High heat stability Fire-stop, good adhesio Good adhesio, oil resistace Color Traslucet Grey Blackwhite-grey Black Red Red Grey Black Cure-type Alkoxy Alkoxy Alkoxy Alkoxy Acetoxy Acetoxy Oxime Oxime Low Meko* Properties before curig Specific gravity at 25 C (1) 1.03 1.38 1.3 1.25 1.14 1.02 1.4 1.33 Viscosity (MPa.s) (2) - - - - 22 000 - - Extrusio (g/mi) (3) 80 30 130 160-130 152 120 Flowability (4) < 2 mm < 3 mm < 2 mm 1 mm 30 sec 5 mm < 1 mm < 5 mm Cured compoud Ski formatio time (mi) Settig time for a 2 mm thickess (h) Cured thickess after 24 h (mm) 10 10 10 15 8 4 7 4-15 8 16 6 6 10 4 3 3.5 2.5 4.5 4.5 3.8 Shore A hardess for 6 mm thick sectio 17 24 34 33 34 30 20 40 (poits) (6) Secat modulus for 100% elogatio (MPa) (7) 0.35 0.5 0.9 0.7 0.8 0.7 0.3 1 Mechaical after curig (7 days) Tesile stregth (MPa) (7) 2 1.4 3.5 2.1 2 3 1.0 1.5 Elogatio at break (%) (7) 750 600 450 350 250 500 600 300 Tear stregth (kn/m) (8) - - 15 8.5 6 10 - Lap shear stregth (MPa) (9) 0.9 0.6 1.2 1.7 0.8** 2 0.85 Type of failure CF (cohesive failure) / CF CF CF CF CF CF CF AF ( failure) (10) Physical after curig Storage Lower service temperature ( C) Maximum cotiuous service temperature, 1000 h ( C) Maximum peak service temperature, 72 h ( C) Shelf life from the productio date (moths) - - 60-60 - 60-65 - 60-70 180 180 150 185 275 275 180 185 220 300*** 300*** 250 12 12 12 6 24 24 18 12 (1) ISO R 1183, DIN 53479, NM 703 (2) Brookfield T 76105, ASTM D 445 (3) NM 495 A 3 mm / 3 bars (4) No-flowig: Boeig S 7502 NM 459 (mm), flowig: MIL S 880 2D, NM 458 (sec or mi) (5) Temp. 23 C, relative humidity 50% (6) ISO R 868, DIN 53505, ASTM D 2240, BS 903 (A7), T 46003, NM 471 (7) ISO R 37 (H2), DIN 53504, ASTM D 412, BS 903 (A2), T 46002 (H2), NM 470 (8) ASTM D624 specime A, NM492 (9) Alumium AGQ3 specime, 1 mm thick joit, NM748 (10) + measuremet made after 7 days for acetoxy products ad after 14 days for oximic ad alkoxy products

CAF PROPERTIES High performace assembly activated CAF (bi compoet) CAF 8 AXAD CAF 33 AXAD CAF 99 AXAD CAF 5751 AXAD Protectio, coatig ad pottig CAF 2 fluid CAF 4 dispersio CAF 7037 Product category Selflevellig, self No-flowig, self- Selflevellig, self Flowable, self-, eutral Flowable, Flowable, o, eutral Mai characteristics Accelerated curig, heat stability Accelerated curig, high elogatio Accelerated curig, good mechaical Fast cure, mechaical, ijectable Self-levellig Sprayable Release coatig Color Brick red Black Black Off-white Traslucet Off-white Red Cure-type Activated acetoxy Activated acetoxy Activated acetoxy Activated acetoxy Oxime Acetoxy Oxime Properties before curig Specific gravity at 25 C (1) 1.14/1.43 1.04/1.43 1.11/1.43 1.3/1.17 1 1.02 1.1 Viscosity (MPa.s) (2) 20 000/ - - / - - / - 100 000/- 30 000 6 500 50 000 Extrusio (g/mi) (3) - - - - - - - Flowability (4) - 5 mm 5 mm < 5 mm - - - Cured compoud Ski formatio time (mi) Settig time for a 2 mm thickess (h) Cured thickess after 24 h (mm) 4 4 3 4 12 12 30 - - - 16 4 6 - - - - 3-3.5 Shore A hardess for 6 mm thick sectio 36 25 51 53 18 34 22 (poits) (6) Secat modulus for 100% elogatio (MPa) (7) 0.8 0.6 2.3 3.1 0.3 0.7 0.5 Mechaical after curig (7 days) Tesile stregth (MPa) (7) 1.6 2.4 4.3 4.4 0.7 3.6 2 Elogatio at break (%) (7) 180 500 235 180 250 310 300 Tear stregth (kn/m) (8) 6.5 6 10 8.0 1.8 4.2 3.3 Lap shear stregth (MPa) (9) 1 2.1 2.17 2.2 0.4 0.6 0.25 Physical after curig Storage Type of failure CF (cohesive failure) / AF ( failure) Lower service temperature ( C) Maximum cotiuous service temperature, 1000 h ( C) Maximum peak service temperature, 72 h ( C) Shelf life from the productio date (moths) CF CF CF CF CF CF AF - 65-65 - 70-65 - 50-65 - 60 250 180 250 225 150 225 300 250 275 250 250 225 250 18 18 18 18 10 24 12 Adhesive: self- to alumium, glass, eamel, ceramics: for other surfaces it is recommeded to use primers * Methylethyl Ketoxime (MEKO) cotet < 1% ** 7 days at RT + 1 h at 240 C *** 15 h, 320 C 15 mi, 350 C

CAF PROPERTIES Maiteace, servicig, repair CAF 1 CAF 3 CAF 730 CAF 731 Product category Self-levellig Flowable, No-flowig, eutral No-flowig, self-, eutral Mai characteristics Heat stability No-slip High extrusio, mechaical Mechaical Color Red Traslucet White White Properties before curig Cure-type Acetoxy Acetoxy Oxime Alkoxy Specific gravity at 25 C (1) 1.12 1.01 1.02 1.3 Viscosity (MPa.s) (2) 250 000 140 000 - - Extrusio (g/mi) (3) - - > 120 120 Flowability (4) 5 mi 2 to 12 mi 2 mm < 2 mm Ski formatio time (mi) 7 8 7 10 UL 94 Homologatio : CAF 22 Ox, CAF 2F, CAF 30, CAF 8, CAF 505, CAF 520, CAF 530, CAF 99 AXAD Cured compoud Mechaical after curig (7 days) Settig time for a 2 mm thickess (h) Cured thickess after 24 h (mm) 6 5 7 8 4.3 4.5 4.6 3.5 Shore A hardess for 6 mm thick sectio 47 26 25 40 (poits) (6) Secat modulus for 100% elogatio (MPa) (7) 2 0.5 0.5 1 Tesile stregth (MPa) (7) 4.4 1.3 1.9 3.3 Elogatio at break (%) (7) 260 400 420 Tear stregth (kn/m) (8) 6 2.5 4 13 CAF products are sold i various packs icludig 100 g tubes, 22 223 litre drums ad 260 ml to 310 ml cartridges. As for all of our products, our direct sales etwork, backed up by our local specialist distributors, provides highperformace services. Lap shear stregth (MPa) (9) 1.8 0.5 0.2 1.2 Type of failure CF (cohesive failure) / CF CF AF CF AF ( failure) (10) Physical after curig Storage Lower service temperature ( C) Maximum cotiuous service temperature, 1000 h ( C) Maximum peak service temperature, 72 h ( C) Shelf life from the productio date (moths) - 65-60 - 55-60 225 150 300 225 225 180 24 18 12 12 (1) ISO R 1183, DIN 53479, NM 703 (2) Brookfield T 76105, ASTM D 445 (3) NM 495 A 3 mm / 3 bars (4) No-flowig: Boeig S 7502 NM 459 (mm), flowig: MIL S 880 2D, NM 458 (sec or mi) (5) Temp. 23 C, relative humidity 50% (6) ISO R 868, DIN 53505, ASTM D 2240, BS 903 (A7), T 46003, NM 471 (7) ISO R 37 (H2), DIN 53504, ASTM D 412, BS 903 (A2), T 46002 (H2), NM 470 (8) ASTM D624 specime A, NM492 (9) Alumium AGQ3 specime, 1 mm thick joit, NM748 (10) + measuremet made after 7 days for acetoxy products ad after 14 days for oximic ad alkoxy products

CAF APPLICATIONS Sealig bodig Electrical protectio Coatig Maiteace F = Flowable = No-Flowig Rheology Adhesive Self- High-temperature adhesio No-corrosive Quick-settig Isulatio Coatig Pottig Sealig No-slip Release coatig Thermal protectio Automotive Electricity Aeroautics marie rail Idustrial ad professioal rage High-performace assembly ad protectio Protectio, coatig ad pottig Maiteace, servicig ad repair CAF 22 OX CAF 30 CAF 1 extra fluid F CAF 4 CAF 33 CAF 44 CAF 5661 CAF 5662 CAF 2 fluid CAF 4 dispersio CAF 7037 CAF 520 CAF 505 CAF 510 CAF 530 CAF 50 CAF 8 F CAF 36 CAF FR 55 CAF 5552S CAF 8 AXAD F CAF 33 AXAD CAF 99 AXAD CAF 5751 AXAD F CAF 1 CAF 3 CAF 730 F F F F F CAF 731 Bluesil Silicoe Remover is a cleaig aget, which will destroy all cured silicoe. The product is liquid so it s very coveiet for cleaig tools: ozzle, screw, spatula, etc by immersio i Bluesil Silicoe Remover. This product ca also be used o substrates i order to replace or remove silicoe bead. It ca be used o glass, eamel, metal (stailess steel, aodized alumium). Mai substrates Physical State Colour Specific gravity at 20 C, approx.. Flash poit, C, approx.. Mi. applicatio time Packagig Shelf life Bluesil Silicoe Remover Glass, eamel, metals, Stailess steel, aodized alumium, PC, PP, PE Liquid Ligh brow 0.9 >70 20mi. 1L, 40L 24 moths Mai beefits: Removes all type of cured RTV Silicoe Available ready to use Usable o several substrates. Check TDS before applicatio It is ecessary to verify the compatibility with substrate

BLUESTAR SILICONES Bluestar Silicoes is oe of the world s leadig fully itegrated silicoe maufacturers with applicatios ad research laboratories, productio sites ad sales offices located aroud the globe. We focus o developig state-of-the-art applicatio expertise to help our customers challege their boudaries. At Bluestar Silicoes, we re more tha just high quality silicoe products. We are dedicated people located aroud the globe committed to your success. From techical support to customized formulatios ad regulatory support, Bluestar Silicoes has the people i place whe ad where you eed them. Referece : SIL1400731 - www.agece-maverick.com For detailed commercial cotacts please visit our website : www.bluestarsilicoes.com The iformatio cotaied i this documet is give i good faith ad based o Bluestar Silicoes curret kowledge. Bluestar Silicoes makes o represetatio or warraty as to the accuracy, completeess of such iformatio or as to the compatibility of such iformatio with the user s iteded applicatio : iformatio is supplied o a as-is basis ad is ot bidig o Bluestar Silicoes. Nothig c otaied herei is iteded as a recommedatio to use the products so as to ifrige ay patet. Bluestar Silicoes assumes o liability for users violatio of patet or other rights ad disclaims ay liability for loss, ijury or damage which may result from the use of the products. Therefore, iformatio cotaied herei must ot be used as a substitute for ecessary prior tests which are the sole resposibility of the user ad which aloe ca esure that a product is suitable for a give use. Bluestar Silicoes Frace SAS 21 aveue Georges Pompidou F-69466 Lyo Cedex 03 - Frace Tel. : +33 (0)4 72 13 19 00 - Fax : +33 (0)4 72 13 19 88