Sprayers Wanjet sprayers has been produced since 1978. Already from beginning was our assortment mainly based on high pressure sprayers with a pressure up to 150 bar. The idea about the high pressure is to get smaller droplets and coverage of the plants with less liquid in combination with gettting better under coverage on the underside of the leafes, because of the turublence generated by the high pressure. 2/1
WANJET A25 Allround sprayer A sprayer for chemical application in any situation or location. Mobile Easy use-application Designed for operators safetyconvenience Strong, zinc plated chassis for long life and high corrosion resistance Output, max... 11 l/min Pressure, max... 15 bar Motor... 230 VAC, 0,25 kw Cord... 1 m Tank capacity... 25 l Dimensions, lxwxh. 58x43x109 cm Weight... 23 kg Standard Equipment Spray lance with radial nozzle. Spray hose, 10 m 2/2 SPRAYERS
WANJET P25 Allround sprayer A sprayer for chemical application in any situation or location. Mobile and petrol driven Easy use-application Designed for operators safetyconvenience Strong, zinc plated chassis for long life and high corrosion resistance Capacity, max... 11 l/min Working pressure... 15 bar Petrol engine... 1,5 Kw Solution tank... 25 l Dimensions, lxbxh.. 58x43x109 cm Weight... 24 kg Standard equipment Spraylance with radial nozzle Spray hose 10 m SPRAYERS 2/3
WANJET B25 Battery powered A rechargable powered sprayer for chemical application in any situation or location. Portable - Mobile Finger-tip chemical control Easy use-application Designed for operators safetyconvenience Strong, zinc plated chassis for long life and high corrosion resistance Re-chargable battery power options provide 8 hours operation cycle for repeated routine use throughout the working day Output, max... 2,2 l/min Pressure, max... 4,5 bar Pump... 12 VDC, Battery... 12 VCD, 19 Ah Tank capacity... 25 l Dimensions, lxwxh. 48x43x109 cm Weight... 16 kg Standard Equipment Spray lance with electric switch, Spray pipe of telescope type, adjustable between 62-107 cm. 1 Adjustable radial nozzle 1 Flat spray nozzle Spray hose 5 m Battery 12 VDC, 19 Ah 3 step, compact charger for safe fast charging. LED indicator with three different colours shows the charge status. 2/4
WANJET A100 Allround sprayer A sprayer for chemical application in any situation or location. Mobile and petrol driven Easy use-application Designed for operators safetyconvenience Strong, zinc plated chassis for long life and high corrosion resistance Also available with petrol engine Wanjet P100. Output, max... 11 l/min Pressure, max... 15 bar Motor... 230 VAC, 0,25 kw Cord... 0,5 m Tank capacity... 110 l Dimensions, lxwxh. 130x75x107 cm Weight... 68 kg Standard Equipment Spray lance with radial nozzle. Hose reel Spray hose 50 m 2/5
HP110 Wanjet HP110 is a modern high-pressure spray unit for efficient greenhouse spraying. The machine can be adapted for efficient spraying of all types of plants. Fine spray Superior cultivation coverage, improved effects of preparations. Powerful turbulence Good penetration of plants thanks to powerful turbulence in air. and liquid streams. Shorter working time The capacity of the machine, in combination with the Wanjet spray system reduces working times. Highpressure sprayer Automatic agitation, to provide a completely homogeneous spraying liquid, is arranged via a by-pass valve. The filtration of particles is carried out in two stages, partly via a filter in the tank filler, and partly by means of a filter housing with a replaceable filter element, mountied between tank and pump. A hose reel, mounted at 2 points at a convenient working height, which can be turned in three directions saves time and reduces wear on the hose. By means of a pressure regulator, the working pressure can be set with an infinite range of adjustment between 0 and 150 bar. With a change of nozzle the machine can be used for highpressure cleaning. The Wanjet Spray system includes a large range of spray nozzles, for the best possible adaption to the work requirements. The machine is fitted with an electric motor and a modern plunger pump. The tank is manufactured of transparent polyethylene, and its volume is graduated for quick checking of the contents level. The lack of sharp corners makes the tank easy to clean, and it is shaped to provide complete emptying when spraying. Power output... 4,0 kw, 220/380 V, 3-phases Pump capacity (for art no 5030)... 15 l/min, 150 bar Pump capacity (for art no 5033)... 21 l/min, 150 bar Tank agitation... Yes Tank volume... 110 l Cable length... 10 m Hose reel... max hose length, 100 m Dimensions, LxWxH... 130x75x107 cm Weight... 95 kg 2/6
HP300 Wanjet HP300 is a modern high-pressure spray unit for efficient greenhouse spraying. The machine can be adapted for efficient spraying of all types of plants. Fine spray Superior cultivation coverage, improved effects of preparations. Powerful turbulence Good penetration of plants thanks to powerful turbulence in air. and liquid streams. Shorter working time The capacity of the machine, in combination with the Wanjet spray system reduces working times. Highpressure sprayer Automatic agitation, to provide a completely homogeneous spraying liquid, is arranged via a by-pass valve. The filtration of particles is carried out in two stages, partly via a filter in the tank filler, and partly by means of a filter housing with a replaceable filter element, mountied between tank and pump. A hose reel, mounted at 2 points at a convenient working height, which can be turned in three directions saves time and reduces wear on the hose. By means of a pressure regulator, the working pressure can be set with an infinite range of The Wanjet Spray system includes a large range of spray nozzles, for the best possible adaption to the work requirements. The machine is fitted with an electric motor and a modern plunger pump. The tank is manufactured of transparent polyethylene, and its volume is graduated for quick checking of the contents level. The lack of sharp corners makes the tank easy to clean, and it is shaped to provide complete emptying when spraying. Power output... 4,0 kw, 220/380 V, 3-phases Pump capacity... 15 l/min Working pressure... 0-150 bar Tank agitation... Yes Tank volume... 300 l adjustment between 0 and 150 bar. With a change of nozzle the machine can be used for high pressure cleaning. Cable length... 10 m Hose reel... max hose length, 100 m Dimensions, LxWxH... 160x75x121 cm Weight... 125 kg 2/7
WANJET HP-spraying system 2/8
M1 - M2 - M3 - M4 - V1 Mobile vertical spraybooms Wanjet mobile vertical spraybooms are made to make an optimal spraying of crops where vertical spraying is required. The frame and pipes are made of stainless steel. The nozzles can be individually adjusted in three different positions. Each nozzle is possible to close seperately. The nozzles are of chemical resistant plastic with ceramic insert to guarantee a long lifetime. The system can be supplied with flange wheels for piperail systems, massive rubber wheels or pneumatic wheels. For the flange wheels can the width between the wheels easaly be adjusted to fit different widths of piperail systems. All the different units below are equipped with pressure gauge, ball valve and pressure regulator. M1-x Sprayboom with flange wheels for piperail width between 38-63 cm M2-x Sprayboom with flange wheels for piperail width up to 100 cm. (to be cut down to desired length. Total width adjustable 25 cm) M3-x Sprayboom with massive rubber wheels. M4-x Sprayboom with pneumatic wheels V1-x Sprayboom with inlet pipe, but without wheeled frame x=no of nozzles which can be 6, 8, 10, 12, 14, 16, 18 2/9
M1 M2 M3 M4 V1 Length x width*, cm 117x49 117x86 117x49 117x53 117x8 Nozzles Height, cm/weight, kg: 6 109/14,8 109/19,1 110/15,1 113/16,8 104/4,5 8 135/15,8 135/20,1 136/16,1 139/17,8 130/5,5 10 170/16,7 170/21,0 171/17,0 174/18,7 165/6,4 12 205/17,6 205/21,9 206/17,9 209/19,6 200/7,2 14 250/18,7 250/23,0 251/19,0 254/20,7 245/8,3 16 285/19,5 285/23,8 286/19,8 289/21,5 280/9,1 18 320/20,4 320/24,7 321/20,7 324/22,4 315/9,9 Max working pressure: 20 bar *min width indicated. wheels included View of the adjusable nozzle with integrated shut off function Ordering information: Please state Model type / No of nozzle If you order Model type / No of nozzles/tx The spryboom will then be equipped with standard flat spray nozzle type 8002VK Standard nozzle will be replaced by conical nozzles type 8002TX All models are delivered in carton box 118x24,5x20 cm with assembling instructions. 2/10