Pagina 1 di 6 DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. P-12685 This Certificate consists of 6 pages This is to certify that the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings 791.70 with type designation(s) Flexor 1ST, -1A, -1SN, -1AT, Flexopak 2, Flexor 2ST, -2A, - 2AT, -2SN, 122T, 122G, 222T, 222G Manufactured by ALFAGOMMA HYDRAULIC SPA CASTELNUOVO VOMANO, Italy is found to comply with Det Norske Veritas' Rules for Classification of Ships Offshore Standard DNV-OS-D101, Marine and Machinery Systems and Equipment Det Norske Veritas' Standards for Certification 2.9 No. 5-791.70 Application Hydraulic and Pneumatic systems (incl. power and control for steering gears)/fuel Oil/Lube Oil/Compressed Air/Fresh Water/Sanitary. 122T and 122G, sizes 1/4" to 3/4" may be used as connection between valves and manifolds on high pressure CO2 systems Type: Temperature range: Max. working press.: Sizes: Flexor 1ST, -1A, - 1SN, -1AT -40 C to 125 C (see 40 to 225 bar (dep. Flexopak 2-40 C to 125 C (see 112 to 400 bar (dep. DN6 to 31mm (1/4" to
Pagina 2 di 6 1-1/4") Flexor 2ST, -2A, - 2AT, -2SN -40 C to 125 C (see 80 to 400 bar (dep. 122T, 122G -40 C to 125 C (see 40 to 225 bar (dep. 222T, 222G -40 C to 125 C (see 80 to 400 bar (dep. Place and date This Certificate is valid until Høvik, 2008-01-31 2009-12-31 for Det Norske Veritas AS Hanne Anita Hjerpetjønn Local Office Øyvind Skåra Head of Section DNV Milan Surveyor Product description Alfagomma Type designations: Flexor 1ST acc. EN 853 and 100R1A acc. SAE J517 (skive) Flexor 1SN acc. EN 853 and 100R1AT acc. SAE J517 (non-skive) Dunlop Hiflex Type designations: 122T, 122G acc. EN 853 1SN Design: Flexible rubber hoses reinforced by one steel wire braid. Tube: Oil resistant synthetic rubber nitrile. Reinforcement: One, high tensile steel wire braid. Cover: Chloroprene rubber, weather-, oil- and abrasion resistant. Couplings: Carbon steel (9SMnPb28 acc. UNI 4838) or Stainless Steel (XCrNi18 10 acc. UNI 6901) Alfagomma Type designations: Flexor 2ST acc. 2ST in EN 853 and 100R2A in SAE J517 (skive) Flexor 2SN acc. 2SN in EN 853 and 100R2AT in SAE J517 (non-skive) Dunlop Hiflex Type designations: 222T, 222G acc. EN 853 2SN Alfagomma Type designation : Flexopak 2 acc. 2SC in EN857 (DN 25), 100R16 acc. SAE 517 (DN32) Design: Flexible rubber hoses reinforced by two steel wire braids. Tube: Oil resistant synthetic rubber nitrile. Reinforcement: Two high tensile steel wire braids. Cover: Chloroprene rubber, weather-, oil- and abrasion resistant. Couplings: Carbon steel. Manufacturing plants:
Pagina 3 di 6 Couplings Alfatechnology S.r.l. Zona Industriale Piano Lago 87050 Mangone (CS) Alfatechnology S.r.l. Via dell'industria, 12 20040 Bellusco (MI) Hoses Alfagomma Hydraulic S.p.A. Via Enrico Mattei no.6 64020 - Castelnuovo Vomano (TE) Alfagomma Hydraulic S.p.A. Area Industriale Piano Lago 87050 Figline Vegliaturo (CS) Hose/fitting combinations: Flexor 1ST, -1A, -1SN, -1AT, 122T, 122G DN FERRULE INSERT [inch] [mm] Carbon Steel Stainl. Steel Carbon Steel Stainl. Steel 1/4 6 H1100204-04 H3100204-04 H12-04 H32-04 5/16 8 H1100204-05 H3100204-05 H12-05 H32-05 3/8 10 H1100204-06 H3100204-06 H12-06 H32-06 1/2 12 H1100204-08 H3100204-08 H12-08 H32-08 5/8 16 H1100204-10 H3100204-10 H12-10 H32-10 3/4 19 H1100204-12 H3100204-12 H12-12 H32-12 1 25 H1100204-16 H3100204-16 H12-16 H32-16 1 1/4 31 H1100104-20 H3100104-20 H12-20 H32-20 1 1/2 38 H1100104-24 H3100104-24 H12-24 H32-24 2 51 H1100104-32 H3100104-32 H12-32 H32-32 Hose/fitting combinations: Flexopak 2, Flexor 2ST, -2A, -2AT, -2SN, 222T, 222G DN FERRULE INSERT [inch] [mm] Carbon Steel Stainl. Steel Carbon Stainl. Steel Steel 1/4 6 H1100204-04 H3100204-04 H12-04 H32-04 5/16 8 H1100204-05 H3100204-05 H12-05 H32-05 3/8 10 H1100204-06 H3100204-06 H12-06 H32-06 1/2 12 H1100204-08 H3100204-08 H12-08 H32-08 5/8 16 H1100204-10 H3100204-10 H12-10 H32-10 3/4 19 H1100204-12 H3100204-12 H12-12 H32-12 1 25 H1100204-16 H3100204-16 H12-16 H32-16 1 1/4 31 H1100204-20 H3100204-20 H12-20 H32-20 H1100104-20 *) H3100104-20 *) 1 1/2 38 H1100204-24 H3100204-24 H12-24 H32-24 2 51 H1100204-32 H3100204-32 H12-32 H32-32 *) - Flexopak 2 Couplings are fitted to the hoses at: Alfatechnology S.r.l.
Pagina 4 di 6 Application/Limitation The type approval is valid also for distributors authorised by Alfagomma Hydraulic Hose South S.p.A to fit the couplings to the hoses when same specifications, tolerances, equipment and quality control procedures are used. The following companies are given the authorisation: Dunlop Hiflex UK Ltd. PO Box 87, Dunlop Hiflex Oy Leyland Business Park, Vapaalantie 8 Centurion Way, 01650 Vantaa Farington, Leyland. FINLAND PR25 3WL Dunlop Hiflex AB Dunlop Hiflex Norway Seldonsvägen 2 Stanseveien 30 Postbox 536 Postboks 175 Kalbakken S-301 80 Halmstad N-0903 OSLO SWEDEN NORWAY Dunlop Fluidtechnik GmbH Dunlop Hiflex A/S Pforzheimer Str. 126 Industrisvingen 5 76275 Ettlingen Postboks 195 GERMANY DK-2605 BRØNDBY Maximum working pressure (MWP): DENMARK DN [inch] [mm] Flexor 1ST, -1A, -1SN, - 1AT, 122T, 122G MWP[bar] Flexor 2ST, -2A, -2AT, -2SN, Flexopak 2 222T, 222G ¼ 6 225 400 400 5/16 8 215 350 375 3/8 10 180 330 350 ½ 12 160 275 310 5/8 16 130 250 280 ¾ 19 105 215 240 1 25 88 165 185 1 ¼ 31 63 125 112
Pagina 5 di 6 1 ½ 38 50 90-2 51 40 80 - Temperature range: -40 to 100 ºC continuos operation. Maximum peak temperature 125 ºC. Hoses used for continuous operation at temperatures higher than 100 C will have their lifetime reduced. In such cases more frequent inspections and planned exchange should be a part of the maintenance program. For compressed air or gases above 16 bar the cover should be pin prickled. Flexible hoses are only to be used in lengths up to 2 meters where it is necessary due to vibrations or flexible mounting of the machinery. The hoses shall not replace/be used where permanent piping is possible/required. The hoses must only be fitted in places where they are always accessible. Flexible hoses of these types are not to be used in boiler fronts. The hoses are to be mounted in accordance with the manufacturer's instructions. It must be possible to shut off from the system all flexible hoses used in systems for compressed air, lube oil, fuel oil and petroleum base hydraulic oil. Each hose is to be hydraulic pressure tested to 1.5 times the maximum working pressure and to be delivered with manufacturer's pressure test certificate. Hose assemblies with couplings made of carbon steel are not to be used at temperatures below -10 C unless the material is normalized. Type Approval documentation Tests carried out Dimensional Check Test, Change in Length Test, Burst Test, Cold Flexibility Test, Ozone Resistance Test, Impulse Test, Oil Resistance Test according to EN853 and SAE J517 respectively and Fire Test according to ISO 15540. Burst test at - 60 C qualifying 122T and 122G: 3/16" to 3/4" for CO 2 Marking of product For traceability to this type approval, the final products (hoses with couplings) are to be marked: Manufacturer's name or trademark and type designation: - Alfagomma ( ) Flexor 1ST, -1A, -1SN, -1AT; Flexopak 2; Flexor 2ST, -2A, -2AT, -2SN
Pagina 6 di 6 - Dunlop Hiflex ( ) 122T, 122G or 222T, 222G Additional marking at manufacturer's option. Certificate retention survey For retention of the Type Approval, DNV Surveyor shall perform a survey every second year, to verify that the conditions for the type approval are complied with and to witness the following tests on a selection of sizes: - Dimensional check. - Change in length - Leakage test - Burst test The tests shall be performed in accordance with procedures given in Det Norske Veritas' Certification Notes no. 2.9-5-791.70 "Type Approval of Flexible Hoses of Non-Metallic Material" or another recognised standard. The tests are to be performed with the type of couplings fitted that are Type Approved with the hoses. Hoses from all manufacturing plants mentioned in this certificate are to be tested. END OF CERTIFICATE Notice: This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to such person for his proved direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum compensation shall never exceed USD 2 million.in this provision "Det Norske Veritas" shall mean the Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers, employees, agents and any other acting on behalf of Det Norske Veritas. DET NORSKE VERITAS AS VERITASVEIEN 1, 1322 HØVIK, NORWAY TEL: (+47) 67 57 99 00 FAX: (+47) 67 57 99 11