JI Fittings DRAFT PIPE & PORT 4-8-06 The Fitting Authority
4300 Catalog JI Fittings F3T4 BPT / 30 Flare PNMT4 FNMT4 Cap V3T4 BPT / 30 Flare C3T4 BPT / 30 Flare 30 Flare F3P4 BPT / 60 Cone P4 Union G3P4 BPT / 60 Cone PNMP4 F63P4 60 wivel / BPT 60 Cone G63P4 60 wivel / BPT P46 Union wivel FNMP4 Cap C3P4 BPT / 60 Cone V3P4 BPT / 60 Cone P47OMN ex ead B35 Port O-Rings and eals (hown in ection O) JI O-Rings and eals JI B35 O-Ring O6 I Parker annifin Corporation
4300 Catalog JI Fittings Introduction Parker introduced Japanese Industrial tandard (JI) adapters in the early 990s to address market requirements for OEM and replacement fittings. These fittings are typically used as hose adapters on equipment designed and/or manufactured in Japan and Korea. Parker s JI adapters are designed with 30 flare and 60 cone connections and typically incorporate BP threads. Parker JI adapters are designed with and BPT port ends and two styles of hose ends: T4 (30 flare, threads) and P4 (60 cone, threads). Two additional Parker series of fittings, KA (Komatsu flare) and K4 (B B500) adapters, are similar to JI style fittings and appear in sections J and K of this catalog. The T4 and P4 interfaces provide end user flexibility of connecting to the most common Parker hose ends available as listed in Table I. Parker s JI adapter offering that uses the port connection are manufactured in accordance with the JI B35 type O port connection which is commonly used for higher pressure systems. Fig. I illustrates this port connection and Table I shows appropriate JI B35 O-rings and dash sizes. It should be noted that Parker offers two very similar cone style adapters P4 and K4. Parker s K4 (60 cone, ) fittings conform to B500, while Parker s JI cone adapters meet JI B8363 specifications. These fittings, while very similar, are not interchangeable. ee the K4 section of this catalog for more specific information on interchangeability. Fig. I JI T4 and P4 Interfaces Adapter Connection End P4 / P46 T4 / T46 Mating Parker ose Fitting eries UT, GU, G, G FU Table I Parker JI Fittings ose Adaptability JI B00 () Threads Design and Construction Construction: haped JI adapters are manufactured from a hot forged construction. traight adapters are manufactured from cold drawn barstock. Threads: The standard JI products are manufactured with the thread forms listed below: Threads: IO 8- G, JI B 00, BPT Threads: IO 7/, JI B 003 Identification: All Parker JI fittings are stamped with JI for positive identification and differentiation from similar style fittings. Assembly and Installation Please refer to ection T for the assembly and installation instructions for JI fittings. Materials pecifications JI fitting components are manufactured using state-of-the-art equipment and manufacturing technologies to assure construction integrity, highest strength, long service life and the highest quality. These materials are shown in Table I3. Upon request, JI fittings can be furnished in materials other than Parker s standard steel offering. Fig. I JI B35 Type O Port Connection Table I3 tandard Material pecifications for Parker Japanese Industrial tandard (JI) Fittings JI O-Ring JI Adapters teel ATM Type Forged Bodies A576 4/5 Bar tock Bodies A08 4 G Thread per IO 8- JI B 00 Dash ize Port O-Ring (ee Pg. O6) /8-8 P8 /4-9 4 P 3/8-9 6 P4 /-4 8 P8 3/4-4 P4-6 P9 Table I JI B35 Port Threads and O-Rings as shown in Fig. I I3 Parker annifin Corporation
4300 Catalog JI Fittings Reference JI Ends JI Male, 60 eat JI wivel for 60 eat JI wivel for 30 Flare JI Male, 30 Flare Thread wivel ex Drill Male Turn Back Assembly Allowance Dash ize T4 C D X X 4 /4-9.75 0.77.570.606 0.35 0.36 6 3/8-9.88 0.75.609.684 0.9 0.38 8 /-4.06 0.433.76.763 0.46 0.53 3/4-4.44 0.65.805.84 0.55 0.56 6 -.63 0.88.883.88 0.53 0.58 I4 Parker annifin Corporation
4300 Catalog JI Fittings F3T4 Male Connector 30 Flare / BPT Mates with FU tyle hose fittings PNMT4 30 Flare Mates with FU tyle hose fittings BPT 4F3T4 /4-9 /4-9 0.75.46 5 4-6F3T4 3/8-9 /4-9 0.88.5 5 6-4F3T4 /4-9 3/8-9 0.88.59 5 6F3T4 3/8-9 3/8-9 0.88.59 5 8-6F3T4 3/8-9 / - 4.06.70 5 8F3T4 / - 4 / - 4.06.89 5 F3T4 3/4-4 3/4-4.44.0 4 6F3T4 - -.63.30 3 (mm) 4PNMT4 /4-9 7 0.89 5 6PNMT4 3/8-9 9 0.97 5 8PNMT4 /-4. 5 PNMT4 3/4-4 30.6 4 6PNMT4-36.30 3 FNMT4 Cap 30 Flare V3T4 45 Male Elbow 30 Flare / BPT Mates with FU tyle hose fittings * Across wrench flats 4FNMT4 /4-9 0.75 5 6FNMT4 3/8-9 0.88 5 8FNMT4 /-4.06 5 FNMT4 3/4-4.44 4 6FNMT4 -.63 3 BPT 4 5 U 4V3T4 /4-9 /4-9 0.75 0.87 0.56 5 6V3T4 3/8-9 3/8-9 0.87 0.97 0.75 5 8V3T4 / - 4 / - 4.06.0 0.88 5 V3T4 3/4-4 3/4-4.8.4.06 4 6V3T4 - -.37.6.3 3 C3T4 Male Elbow 30 Flare / BPT F3P4 Male Connector 60 Cone / BPT Mates with FU tyle hose fittings * Across wrench flats Mates with GU, G and G tyle hose fittings BPT U 4C3T4 /4-9 /4-9.00 0.98 0.56 5 6C3T4 3/8-9 3/8-9.8.4 0.75 5 8C3T4 / - 4 / - 4.4.33 0.88 5 C3T4 3/4-4 3/4-4.69.50.06 4 6C3T4 - -.97.74.3 3 BPT 4F3P4 /4-9 /4-9 0.75.44 5 6F3P4 3/8-9 3/8-9 0.88.50 5 8F3P4 / - 4 / - 4.06.8 5 F3P4 3/4-4 3/4-4.44.05 4 6F3P4 - -.63.8 3 Parker annifin Corporation
4300 Catalog JI Fittings P4 Union 60 Cone Mates with GU, G and G tyle hose fittings G3P4 Female Connector 60 Cone / BPT Mates with GU, G and G tyle hose fittings 4P4 /4-9 /4-9 0.75.34 5 6P4 3/8-9 3/8-9 0.88.5 5 8P4 / - 4 / - 4.06.8 5 P4 3/4-4 3/4-4.44.05 4 6P4 - -.63.8 3 BPT 4G3P4 /4-9 /4-9 0.75. 5 6G3P4 3/8-9 3/8-9 0.88.34 5 8G3P4 / - 4 / - 4.06.58 5 G3P4 3/4-4 3/4-4.44.73 4 6G3P4 - -.63.93 3 PNMP4 60 Cone Mates with GU, G and G tyle hose fittings F63P4 wivel Male Connector 60 wivel / BPT Mates with UT tyle hose fittings (mm) 4FNMP4 /4-9 7 5 6FNMP4 3/8-9 9 5 8FNMP4 /-4 5 FNMP4 3/4-4 30 4 6FNMP4-36 3 BPT 4F63P4 /4-9 /4-9 0.75.73 5 6F63P4 3/8-9 3/8-9 0.88.94 5 8F63P4 / - 4 / - 4.06.5 5 F63P4 3/4-4 3/4-4.44.55 4 6F63P4 - -.63.77 3 G63P4 wivel Female Connector 60 wivel / BPT Mates with UT tyle hose fittings P46 wivel Union Connector 60 wivel Mates with UT tyle hose fittings BPT 4G63P4 /4-9 /4-9 0.75.6 5 6G63P4 3/8-9 3/8-9 0.88.78 5 8G63P4 / - 4 / - 4.06.0 5 G63P4 3/4-4 3/4-4.44.0 4 6G63P4 - -.63.5 3 4P46 /4-9 /4-9 0.75. 5 6P46 3/8-9 3/8-9 0.88.37 5 8P46 / - 4 / - 4.06.73 5 P46 3/4-4 3/4-4.44.96 4 6P46 - -.63 3.4 3 Parker annifin Corporation
4300 Catalog JI Fittings FNMP4 Cap 60 Cone Mates with UT tyle hose fittings C3P4 90 Male Elbow 60 Cone / BPT Mates with GU, G and G tyle hose fittings * Across wrench flats 4FNMP4 /4-9 0.75 5 6FNMP4 3/8-9 0.88 5 8FNMP4 /-4.06 5 FNMP4 3/4-4.44 4 6FNMP4 -.63 3 BPT 3 U 4C3P4 /4-9 /4-9.00 0.96 0.56 5 6C3P4 3/8-9 3/8-9.8.4 0.75 5 8C3P4 / - 4 / - 4.4.8 0.88 5 C3P4 3/4-4 3/4-4.69.56.06 4 6C3P4 - -.97.74.3 3 V3P4 45 Male Elbow 60 Cone / BPT Mates with GU, G and G tyle hose fittings P47OMN ex head plug for JI B35 BPT 4 6 U 4V3P4 /4-9 /4-9 0.75 0.8 0.56 5 6V3P4 3/8-9 3/8-9 0.87 0.9 0.75 5 8V3P4 / - 4 / - 4.06.05 0.88 5 V3P4 3/4-4 3/4-4.8.8.06 4 6V3P4 - -.37.3.3 3 (mm) (mm) XX (mm) 4P47OMN /4-9 9 9.. 5 6P47OMN 3/8-9 0.0. 5 8P47OMN /-4 7 4. 4.5 5 P47OMN 3/4-4 36 6.9 4.5 4 6P47OMN - 4 3.0 8.5 3 Parker annifin Corporation
4300 Catalog JI Fittings I8 Parker annifin Corporation