High Strength. Fastening Systems

High Strength Fastening Systems Edition 06 2014

Expertise in Fastening Solutions With over 100 years experience in the design and manufacture of assembly technology, Emhart has the expertise to provide fastening solutions to a wide range of industries from Automotive, Construction, and Electronics through to sheet metal assembly and general industry. We offer consulting, technical advice, a wide range of volume parts and high quality setting equipment to meet the varying needs of our customers. 2

Emhart in Europe Emhart has experienced technical experts and application engineers available throughout Europe ready to support customers with application and assembly processes and fastener specifications. We service our European customers directly through our manufacturing and warehousing facilities around Europe or through our network of highly experienced distributors. Emhart Facilities and Distribution Network Distribution Network 3

4

High Strength Fastening Systems www.emhart.eu Range Guide 6 How Lockbolts Work 8 How Structural Blind Fasteners Work 9 Magna-Lok 10 Auto-Bulb 14 Magna-Tite 15 Magna-Bulb 16 HuckLok 17 BOM 18 FloorTight 19 Magna-Grip 20 C6L C Lockbolt 24 C6L R Lockbolt 26 C6L U Lockbolt 28 C50L Lockbolt 30 Hucktainer 34 BOBTAIL 36 Power Tools 40 Hydraulic Equipment 42 Hydraulic Powered Installation Tools 43 5

High Strength Fastening Systems High strength fastening systems are ideal for applications requiring high clamp forces, vibration resistance and maintenance free, long life joints. High strength fastening systems are coonly found in coercial vehicles, rail, trailers and security fencing. The range has a broad selection of high integrity fasteners, which are easy to install using high speed pneumatic tools. Requiring a simple visual inspection after setting, high strength rivets provide a fast and cost effective solution to the most demanding applications. Range Guide Aluminium Steel Stainless Steel Magna-Lok Wide grip range Excellent gap closure capability Outstanding hole filling on the blind side - excellent joint tightness and resistance to water ingress Internal pin locking mechanism - secure within the rivet body and protected from corrosion Auto-Bulb Structural fastener - high shear & tensile strength Large blind side footprint - ideal for lower strength or thin sheet joint materials High pin retention prevents possibility of noise/vibration in dynamic assemblies Magna-Tite Polymer watertight seal - ideal for roofing or similar applications Extra large blind side footprint - ideal for lower strength or thin sheet joint materials Low clamp load - perfect for use in thin sheet material, composites and plastics Wide grip range - accoodates a large variation in joint thicknesses Magna-Bulb Large blind side footprint - ideal for lower strength or thin sheet joint materials Structural fastener - high shear and tensile strength Flush pinbreak Internal pin locking mechanism - secure within the rivet body and protected from corrosion HuckLok Wide grip range - accoodates a large variation in joint thicknesses Structural fastener - high shear & tensile strength Flush pinbreak - no catching on clothes, skin or goods. Quick and easy visual inspection Large blind side footprint - ideal for lower strength or thin sheet joint materials Internal pin locking mechanism - secure within the rivet body and protected from corrosion, plus additional blind side pin locking for increased fatigue life 10 11 13 14 15 16 17 6 emhart.eu

Aluminium Steel Stainless Steel BOM Very high strength/diameter ratio - can be used in demanding structural applications Very high joint tightness Very resistant to tampering FloorTight Self countersinking head - ideal for use on timber flooring and phenolic faced plywood Superior strength to conventional flooring screws 3 clamp strengths available to suit your joint - no crushing or pulling through the board Wide grip range Magna-Grip Very wide grip range One pin and one collar cover a wide variety of applications Wide grip range minimises fastener inventory Flush pinbreak - no catching on clothes, skin or goods C6L Lockbolt 5.8 grade small diameter Lockbolt Made to British Standard B7805: Part 1: 1997 - a mark of quality, safety and performance Wide flange collar available - enables installation into non metallic materials C50L Lockbolt 8.8 grade large diameter Lockbolt Made to British Standard B7805: Part 2: 1997 - a mark of quality, safety and performance High tensile friction grip fastener Hucktainer Designed specifically for joining composite board in trailer applications Will not crush or damage the composite board Integral seal around pin head prevents moisture ingress Low profile on both sides when installed - no catching on clothes, skin or goods BOBTAIL No Pintail Unmatched installation speed Low overall installation cost Eliminates need for secondary operations Superior strength Vibration resistance 18 19 20 22 24 26 28 30 34 36 emhart.eu 7

How Lockbolts Work Clamp Force or Pre Load: In the initial stages of the installation process, the tool engages and pulls on the pintail. The joint is pulled together before the conical shaped cavity of the nose assembly is forced down the collar. This progressively locks (swages) it into the grooves of the harder pin. The pin and swaged collar combine to form the installed fastener. The squeezing action reduces the diameter of the collar, increasing its length. This in turn stretches the pin, generating a clamp force over the joint. Shear strength of Lockbolts vary according to the material strength and minimal diameter of the fastener. By increasing the diameter or the grade of material, the shear strength of the fastener can be increased. The tensile strength of Lockbolts is dependent on the shear resistance of the collar material and the number of grooves it fills. Head Tensile Centre Line Shear Line Shear Pin Collar Breakneck groove Pintail Pintail-less Lockbolt after installation Lockbolt after installation Lockbolt installation sequence 1. Pin placed into prepared hole - Collar placed over pin 2. Tool is placed over the fastener pintail and activated - Pin head pulled against material - Anvil pushes collar against joint - Initial clamp generated 3. Tool swages collar, increasing clamp 4. Pintail breaks, installation complete 8 emhart.eu

How Structural Blind Fasteners Work The shear strength of structural blind fasteners is generated by the combined resistance against failure of the pin and sleeve. This takes place along the joint s shear line between fastened plates. The tensile strength of structural blind fasteners differs to that of Lockbolts, as they form a blind side positive lock either by bulbing or expanding of the sleeve. The sleeve, assisted by the permanently secured pin, therefore resists failure along its centre line. 1. Bulbing The sleeve of the fastener is compressed, causing it to fold outwards to form a bulb. This forms itself tightly against the joint material. Once the pin is permanently locked into place the pintail will break off, completing the installation. 2. Expanding Pulling on the pintail causes the head of the pin to draw into the sleeve. This expansion causes a foot print to form against the joint material. Note: The pre-load of blind rivets is generally not published, as it varies widely depending on the application. Pin Pintail Tensile Centre Line Shear Shear Line Sleeve Internal Lock Head of pin Bulbing (Magna Bulb) Expanding (HuckLok) Blind Fastener installation sequence 1. Pin placed into prepared hole - Tool is placed over the fastener pintail 2. Tool activated - Deforming of blind side begins 3. Joint tightened - Internal locking mechanism formed 4. Pintail breaks - Installation complete emhart.eu 9

Magna-Lok Aluminium Protruding Head Wide grip range Excellent gap closure capability Outstanding hole filling on the blind side - Excellent joint tightness and resistance to water ingress Internal pin locking mechanism - Secure within the rivet body and protected from corrosion d k k PIN DESCRIPTION RETENTION PACK PACK d l g d h d k k S T ARTICLE BOX QTY ARTICLE BOX QTY N N N 4.76 6.35 9.5 9.53 18.29 1.57-6.86 MGLP-B6-4 5-5.11 9.78 2.16 2669 2224 334 90047 4,000 47541 500 22.35 5.44-11.10 MGLP-B6-7 5-5.11 9.78 2.16 2669 2224 334 90049 3,500 47542 500 24.64 2.03-9.53 MGLP-B8-6 6.63-6.91 13.44 3.02 5783 3959 445 90051 2,000 47543 500 30.99 8.89-15.88 MGLP-B8-10 6.63-6.91 13.44 3.02 5783 3959 445 90053 1,800 90054 450 41.91 3.05-14.22 MGLP-B12-12 9.96-10.36 20.14 4.47 13122 6672 1112 47545 500 47546 100 Truss Head 4.76 18.03 1.57-6.86 MGLT-B6-4 5-5.11 13.49 2.34 2669 2224 222 47547 3,500 47548 500 21.97 5.44-11.10 MGLT-B6-7 5-5.11 13.49 2.34 2669 2224 222 47549 3,000 47550 500 Countersunk Head 4.76 6.35 20.19 3.18-8.41 MGL-100-B6-6 5-5.11 8.89 1.93 2669 2224 334 94594 4,000 94596 500 24.43 7.75-12.70 MGL-100-B6-9 5-5.11 8.89 1.93 2669 2224 334 47553 3,500 47554 500 26.90 4.06-12.07 MGL-100-B8-8 6.63-6.91 10.41 2.16 5783 3959 445 47555 2,000 47556 500 33.25 10.54-18.42 MGL-100-B8-12 6.63-6.91 10.41 2.16 5783 3959 445 47557 1,700 47558 425 d=nominal Diameter, Min - Max Diameter; l=body Length (Max); g=grip Range (Min - Max); d h =Hole Size (Min - Max); d k =Flange Diameter (Max); k=flange Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength Magna-Lok is registered trademark. Copyright Alcoa Inc. 10 emhart.eu

Magna-Lok Wide grip range Excellent gap closure capability Outstanding hole filling on the blind side - Excellent joint tightness and resistance to water ingress Internal pin locking mechanism - Secure within the rivet body and protected from corrosion Steel Protruding Head d k k PIN DESCRIPTION RETENTION PACK PACK d l g d h d k k S T ARTICLE BOX QTY ARTICLE BOX QTY N N N 4.76 6.35 9.5 9.53 18.29 1.57-6.86 MGLP-R6-4 5-5.11 9.78 2.16 5783 4448 700 90055 4,000 47559 500 22.35 5.44-11.10 MGLP-R6-7 5-5.11 9.78 2.16 5783 4448 700 90057 3,500 98533 500 24.64 2.03-9.53 MGLP-R8-6 6.63-6.91 13.44 3.02 11121 8229 1334 47561 2,000 47562 500 30.99 8.89-15.88 MGLP-R8-10 6.63-6.91 13.44 3.02 11121 8229 1334 90061 1,800 47563 450 41.91 3.05-14.22 MGLP-R12-12 9.96-10.36 20.14 4.47 29989 17793 2891 47564 500 47565 100 Truss Head 4.76 6.35 18.03 1.57-6.86 MGLT-R6-4 5-5.11 13.49 2.34 5783 4448 667 47566 3,500 47548 500 21.97 5.44-11.10 MGLT-R6-7 5-5.11 13.49 2.34 5783 4448 667 47568 3,000 47550 500 24.64 2.03-9.53 MGLT-R8-6 6.63-6.91 15.04 3.02 11121 8229 8200 08774 2,000 47571 500 Countersunk Head 4.76 6.35 20.19 3.18-8.41 MGL-100-R6-6 5-5.11 8.89 1.93 5783 4448 667 90075 4,000 47572 500 24.43 7.75-12.70 MGL-100-R6-9 5-5.11 8.89 1.93 5783 4448 667 99359 3,500 47573 500 26.90 4.06-12.07 MGL-100-R8-8 6.63-6.91 10.41 2.16 11121 8229 1334 47574 2,000 47575 500 33.25 10.54-18.42 MGL-100-R8-12 6.63-6.91 10.41 2.16 11121 8229 1334 90072 1700 47576 425 d=nominal Diameter, Min - Max Diameter; l=body Length (Max); g=grip Range (Min - Max); d h =Hole Size (Min - Max); d k =Flange Diameter (Max); k=flange Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength Magna-Lok is registered trademark. Copyright Alcoa Inc. emhart.eu 11

Magna-Lok Steel/Stainless Steel Protruding Head Wide grip range Excellent gap closure capability Outstanding hole filling on the blind side - Excellent joint tightness and resistance to water ingress Internal pin locking mechanism - Secure within the rivet body and protected from corrosion d k k PIN DESCRIPTION RETENTION PACK PACK d l g d h d k k S T ARTICLE BOX QTY ARTICLE BOX QTY N N N 4.76 6.35 18.29 1.57-6.86 MGLP-RU6-4 5-5.11 9.78 2.16 5783 5338 445 47577 4,000 47578 500 22.35 5.44-11.10 MGLP-RU6-7 5-5.11 9.78 2.16 5783 5338 445 47579 3,500 47580 500 24.64 2.03-9.53 MGLP-RU8-6 6.63-6.91 13.44 3.02 11121 9786 1334 47581 2,000 47582 500 30.99 8.89-15.88 MGLP-RU8-10 6.63-6.91 13.44 3.02 11121 9786 1334 47583 1,800 47584 450 Countersunk Head 4.76 20.19 3.18-8.41 MGL100-RU6-6 5-5.11 8.89 1.93 5783 4226 667 47585 4,000 47586 500 d=nominal Diameter, Min - Max Diameter; l=body Length (Max); g=grip Range (Min - Max); d h =Hole Size (Min - Max); d k =Flange Diameter (Max); k=flange Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength Magna-Lok is registered trademark. Copyright Alcoa Inc. 12 emhart.eu

Magna-Lok Wide grip range Excellent gap closure capability Outstanding hole filling on the blind side - Excellent joint tightness and resistance to water ingress Internal pin locking mechanism - Secure within the rivet body and protected from corrosion Stainless Steel Protruding Head d k k PIN DESCRIPTION RETENTION PACK PACK d l g d h d k k S T ARTICLE BOX QTY ARTICLE BOX QTY N N N 4.76 6.35 18.29 1.57-6.86 MGLP-U6-4 5-5.11 9.96 2.57 5783 4226 445 91849 4,000 98131 100 22.35 5.44-11.1 MGLP-U6-7 5-5.11 9.96 2.57 5783 4226 445 90065 3,500 47588 500 23.37 2.03-9.53 MGLP-U8-6 6.63-6.91 13.44 3.02 10453 8007 890 90067 2,000 47589 500 30.99 8.89-15.88 MGLP-U8-10 6.63-6.91 13.44 3.02 10453 8007 890 90069 1,800 90070 100 Countersunk Head 4.76 6.35 19.35 3.18-8.41 MGL100-U6-6 5-5.11 8.89 1.93 5783 4226 445 90073 4,000 03239 1,000 26.90 4.06-12.07 MGL100-U8-8 6.63-6.91 10.41 2.16 10453 8007 890 90074 2,000 92654 100 33.25 10.54-18.42 MGL100-U8-12 6.63-6.91 10.41 2.16 10453 8007 890 47592 1,700 47594 425 d=nominal Diameter, Min - Max Diameter; l=body Length (Max); g=grip Range (Min - Max); d h =Hole Size (Min - Max); d k =Flange Diameter (Max); k=flange Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength Magna-Lok is registered trademark. Copyright Alcoa Inc. emhart.eu 13

Auto-Bulb Steel Protruding Head Structural fastener - high shear & tensile strength Large blind side footprint - ideal for lower strength or thin sheet joint materials High pin retention prevents possibility of noise/vibration in dynamic assemblies d k PIN DESCRIPTION k RETENTION PACK PACK d l g d h d k k S T ARTICLE BOX QTY ARTICLE BOX QTY N N N 12.0 1.9-2.8 ABP-R6-M2 4.9-5.1 9.9 2.3 5340 3781 667 64000 2,000 13.0 2.2-3.8 ABP-R6-M3 4.9-5.1 9.9 2.3 5340 3781 667 14.0 3.2 - ABP-R6-M4 4.9-5.1 9.9 2.3 5340 3781 667 64001 2,000 15.0 4.2-5.8 ABP-R6-M5 4.9-5.1 9.9 2.3 5340 3781 667 64002 1,700 15.8 1.5-3.5 ABP-R8-M2 6.6-6.9 13.4 3.2 11565 7117 1334 63185 2,000 17.0 2.8 - ABP-R8-M3 6.6-6.9 13.4 3.2 11565 7117 1334 63152 2,000 18.1 3.8-5.8 ABP-R8-M4 6.6-6.9 13.4 3.2 11565 7117 1334 63197 2,000 19.1-6.8 ABP-R8-M5 6.6-6.9 13.4 3.2 11565 7117 1334 63174 1,900 20.1 5.8-7.8 ABP-R8-M6 6.6-6.9 13.4 3.2 11565 7117 1334 09439 1,900 94014 475 21.1 6.8-8.8 ABP-R8-M7 6.6-6.9 13.4 3.2 11565 7117 1334 63198 1,800 22.1 7.8-9.8 ABP-R8-M8 6.6-6.9 13.4 3.2 11565 7117 1334 64003 1,800 23.1 8.8-10.8 ABP-R8-M9 6.6-6.9 13.4 3.2 11565 7117 1334 63177 1,700 24.1 9.8-11.8 ABP-R8-M10 6.6-6.9 13.4 3.2 11565 7117 1334 46504 1,700 Auto-Bulb is registered trademark. Copyright Alcoa Inc. d=nominal Diameter; l=body Length (Max); g=grip Range (Min - Max); d h =Hole Size (Min - Max); d k =Flange Diameter (Max); k=flange Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength 14 emhart.eu

Magna-Tite Polymer watertight seal - ideal for roofing or similar applications Extra large blind side footprint - ideal for lower strength or thin sheet joint materials Low clamp load - perfect for use in thin sheet material, composites and plastics Wide grip range - Accoodates a large variation in joint thicknesses Aluminium Protruding Head k PIN DESCRIPTION RETENTION PACK PACK d l g d h d k k S T ARTICLE BOX QTY ARTICLE BOX QTY N N N d 25.9 1.3-7.9 MTP-B6-5S 5.2-5.6 11.8 3.0 2802 2002 445 on request on request 27.2 2.5-9.5 MTP-B6-6S 5.2-5.6 11.8 3.0 2802 2002 445 on request on request 31.0-12.7 MTP-B6-8S 5.2-5.6 11.8 3.0 2802 2002 445 on request on request 34.2 9.5-15.9 MTP-B6-10S 5.2-5.6 11.8 3.0 2802 2002 445 on request on request 37.3 12.7-19.1 MTP-B6-12S 5.2-5.6 11.8 3.0 2802 2002 445 on request on request 25.2 1.0 - MTP-B8-4S - 6.7 13.7 3.2 4893 2891 445 on request on request 28.5 3.2-9.5 MTP-B8-6S - 6.7 13.7 3.2 4893 2891 445 on request on request 29.2 3.0-10.4 MTP-B8-7S - 6.7 13.7 3.2 4893 2891 445 on request on request 31.5-12.7 MTP-B8-8S - 6.7 13.7 3.2 4893 2891 445 on request on request 34.7 9.5-15.9 MTP-B8-10S - 6.7 13.7 3.2 4893 2891 445 on request on request 37.9 12.7-19.1 MTP-B8-12S - 6.7 13.7 3.2 4893 2891 445 on request on request 24.6 1.3 - MTLP-B6-4 5.2-5.6 11.5 1.3 1557 2002 445 on request on request 31.0-12.7 MTLP-B6-8 5.2-5.6 11.5 1.3 1557 2002 445 on request on request 35.3 9.5-19.1 MTLP-B6-12 5.2-5.6 11.5 1.3 1557 2002 445 on request on request 35.3 1.3-19.1 MTLP-B6-12X 5.2-5.6 11.5 1.3 1557 2002 445 on request on request 29.0 1.3-12.7 MTS-B6-10S 5.2-5.6 11.8 3.0 2802 2002 445 on request on request 35.3 1.3-19.1 MTS-B6-12S 5.2-5.6 11.8 3.0 2802 2002 445 on request on request 2 1.8-7.9 MTV-B6-5S 5.2-5.6 8.7 3.0 2802 2002 445 on request on request 29.0 4.1-10.4 MTV-B6-7S 5.2-5.6 8.7 3.0 2802 2002 445 on request on request 31.0-12.7 MTV-B6-8S 5.2-5.6 8.7 3.0 2802 2002 445 on request on request 34.2 9.5-15.9 MTV-B6-10S 5.2-5.6 8.7 3.0 2802 2002 445 on request on request 37.3 12.7-19.1 MTV-B6-12S 5.2-5.6 8.7 3.0 2802 2002 445 on request on request d=nominal Diameter; l=body Length (Max); g=grip Range (Min - Max); d h =Hole Size (Min - Max); d k =Flange Diameter (Max); k=flange Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength Magna-Tite is registered trademark. Copyright Alcoa Inc. emhart.eu 15

Magna-Bulb Steel Protruding Head Large blind side footprint - ideal for lower strength or thin sheet joint materials Structural fastener - high shear and tensile strength Flush pinbreak Internal pin locking mechanism - Secure within the rivet body and protected from corrosion d k k PIN DESCRIPTION RETENTION PACK PACK d l g d h d k k S T ARTICLE BOX QTY ARTICLE BOX QTY N N N 17.1 2.2-3.8 MBP-R6-M3 4.9-5.1 9.9 2.6 8700 4671 667 47599 3,300 47600 550 17.7 3.2 - MBP-R6-M4 4.9-5.1 9.9 2.6 8700 4671 667 47601 4,000 47602 500 18.6 4.2-5.8 MBP-R6-M5 4.9-5.1 9.9 2.6 8700 4671 667 99025 3,100 47603 310 19.7 5.2-6.8 MBP-R6-M6 4.9-5.1 9.9 2.6 8700 4671 667 90095 3,000 90096 100 20.7 6.2-7.8 MBP-R6-M7 4.9-5.1 9.9 2.6 8700 4671 667 90097 2,900 47605 290 21.7 7.2-8.8 MBP-R6-M8 4.9-5.1 9.9 2.6 8700 4671 667 47606 2,800 47607 400 19.3 1.5-3.5 MBP-R8-M2 6.6-6.9 13.4 3.2 11565 8452 1334 47608 2,000 47609 500 21.9 2.8 - MBP-R8-M3 6.6-6.9 13.4 3.2 12010 8452 1334 47610 2,000 47611 500 23.9 3.8-5.8 MBP-R8-M4 6.6-6.9 13.4 3.2 12277 8452 1334 47612 2,000 47613 500 23.2-6.8 MBP-R8-M5 6.6-6.9 13.4 3.2 13345 8452 1334 90081 1,800 90082 100 23.9 5.8-7.8 MBP-R8-M6 6.6-6.9 13.4 3.2 14234 8452 1334 47615 1,800 47616 450 24.9 6.8-8.8 MBP-R8-M7 6.6-6.9 13.4 3.2 15569 8452 1334 90083 1,700 90084 100 25.9 7.8-9.8 MBP-R8-M8 6.6-6.9 13.4 3.2 15569 8452 1334 47618 1,600 47619 400 26.9 8.8-10.8 MBP-R8-M9 6.6-6.9 13.4 3.2 15569 8452 1334 90085 1,600 90086 100 27.9 9.8-11.8 MBP-R8-M10 6.6-6.9 13.4 3.2 15569 8452 1334 92465 1,600 47622 400 28.9 10.8-12.8 MBP-R8-M11 6.6-6.9 13.4 3.2 15569 8452 1334 90087 1,600 47623 400 30.0 11.8-13.8 MBP-R8-M12 6.6-6.9 13.4 3.2 15569 8452 1334 47624 1,600 47625 400 30.9 12.8-1 MBP-R8-M13 6.6-6.9 13.4 3.2 15569 8452 1334 90089 1,500 47626 500 d=nominal Diameter; l=body Length (Max); g=grip Range (Min - Max); d h =Hole Size (Min - Max); d k =Flange Diameter (Max); k=flange Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength Magna-Bulb is registered trademark. Copyright Alcoa Inc. 16 emhart.eu

HuckLok Wide grip range - Accoodates a large variation in joint thicknesses Structural fastener - high shear & tensile strength Flush pinbreak - No catching on clothes, skin or goods. Quick and easy visual inspection Large blind side footprint - ideal for lower strength or thin sheet joint materials Internal pin locking mechanism - Secure within the rivet body and protected from corrosion, plus additional blind side pin locking for increased fatigue life Steel Protruding Head d k k PIN DESCRIPTION RETENTION PACK PACK d l g d h d k k S T ARTICLE BOX QTY ARTICLE BOX QTY N N N 27.0 2.0-9.5 HKLP-R8-6* 6.6-6.9 12.4-13.5 3.0 15569 8451 1779 0908 2,000 on request 500 28.5-11.1 HKLP-R8-7 6.6-6.9 12.4-13.5 3.0 15569 8451 1779 94426 2,000 on request 500 33.3 9.5-15.9 HKLP-R8-10 6.6-6.9 12.4-13.5 3.0 15569 8451 1779 09120 1,500 on request 500 36.5 12.7-19.1 HKLP-R8-12 6.6-6.9 12.4-13.5 3.0 15569 8451 1779 94428 1,500 on request 500 39.7 15.9-22.2 HKLP-R8-14 6.6-6.9 12.4-13.5 3.0 15569 8451 1779 94319 1,400 on request 500 * For grips below 2.5, please use minimum hole size for best results d=nominal Diameter; l=body Length (Max); g=grip Range (Min - Max); d h =Hole Size (Min - Max); d k =Flange Diameter (Max); k=flange Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength HuckLok is registered trademark. Copyright Alcoa Inc. emhart.eu 17

BOM Steel Protruding Head Very high strength/diameter ratio - can be used in demanding structural applications Very high joint tightness Very resistant to tampering r d k k DESCRIPTION PACK PACK d l g d h d k k S T ARTICLE BOX QTY ARTICLE BOX QTY N N - 5.2-7.0 7.9 7.9-8.8 9.5 9.5-10.4 12.7 12.7-13.9 15.9 15.9-17.3 19.1 19.1-20.8 14.3 4.0-5.6 BOM-R6-3 5.3-5.6 7.2 4.2 12455 8007 47635 4,250 47636 500 15.9 5.6-7.1 BOM-R6-4 5.3-5.6 7.2 4.2 12455 8007 47637 4,250 47638 500 17.5 7.2-8.7 BOM-R6-5 5.3-5.6 7.2 4.2 12455 8007 47639 4,000 47640 500 19.1 8.8-10.3 BOM-R6-6 5.3-5.6 7.2 4.2 12455 8007 47641 3,750 47642 500 15.8 2.4-4.0 BOM-R8-2 7.0-7.4 9.7 5.6 22686 14457 47643 2,000 47644 500 17.3 4.0-5.6 BOM-R8-3 7.0-7.4 9.7 5.6 22686 14457 47645 2,000 47646 500 18.9 5.6-7.1 BOM-R8-4 7.0-7.4 9.7 5.6 22686 14457 47647 1,750 47648 250 20.5 7.2-8.7 BOM-R8-5 7.0-7.4 9.7 5.6 22686 14457 47649 1,750 47650 250 22.1 8.8-10.3 BOM-R8-6 7.0-7.4 9.7 5.6 22686 14457 47651 1,750 47652 250 23.7 10.3-11.9 BOM-R8-7 7.0-7.4 9.7 5.6 22686 14457 47653 1,600 47654 200 25.3 11.9-13.5 BOM-R8-8 7.0-7.4 9.7 5.6 22686 14457 47655 1,500 47656 250 26.9 13.5-15.1 BOM-R8-9 7.0-7.4 9.7 5.6 22686 14457 47657 1,500 47658 250 28.5 15.1-16.7 BOM-R8-10 7.0-7.4 9.7 5.6 22686 14457 47659 1,500 47660 250 30 16.7-18.3 BOM-R8-11 7.0-7.4 9.7 5.6 22686 14457 47661 1,400 47662 200 31.6 18.3-19.8 BOM-R8-12 7.0-7.4 9.7 5.6 22686 14457 47663 1,400 47664 200 22.2-7.9 BOM-R10-4 8.8-9.4 12.2 7.1 35808 23131 47665 900 47666 100 25.4 8.0-11.1 BOM-R10-6 8.8-9.4 12.2 7.1 35808 23131 47667 850 47668 50 28.6 11.1-14.3 BOM-R10-8 8.8-9.4 12.2 7.1 35808 23131 47669 800 47670 100 31.8 14.3-17.5 BOM-R10-10 8.8-9.4 12.2 7.1 35808 23131 47671 750 47672 50 34.9 17.5-20.6 BOM-R10-12 8.8-9.4 12.2 7.1 35808 23131 47673 700 47674 100 24.6-7.9 BOM-R12-4 10.5-11.1 14.4 8.3 49375 32250 47675 650 47676 50 27.8 8.0-11.1 BOM-R12-6 10.5-11.1 14.4 8.3 49375 32250 90076 600 47677 50 31 11.1-14.3 BOM-R12-8 10.5-11.1 14.4 8.3 49375 32250 47678 550 47679 50 34.1 14.3-17.5 BOM-R12-10 10.5-11.1 14.4 8.3 49375 32250 04228 500 47680 50 37.3 17.5-20.6 BOM-R12-12 10.5-11.1 14.4 8.3 49375 32250 90091 500 47681 50 43.7 23.8-27 BOM-R12-16 10.5-11.1 14.4 8.3 49375 32250 47682 450 47683 50 41.7 15.9-19.1 BOM-R16-10 13.9-1 19.1 11.1 89632 57827 47684 230 44.9 19.1-22.2 BOM-R16-12 13.9-1 19.1 11.1 89632 57827 47685 200 45.2 12.7-19.1 BOM-R20-8GA 17.5-18.5 23.9 13.8 126774 91189 47686 130 51.6 19.1-25.4 BOM-R20-12GA 17.5-18.5 23.9 13.8 126774 91189 47687 120 50.8 12.7-19.1 BOM-R24-8GA 21.0-22.2 28.6 16.6 200615 129443 47688 80 57.2 19.1-25.4 BOM-R24-12GA 21.0-22.2 28.6 16.6 200615 129443 47689 80 d=nominal Diameter, Min - Max Diameter; l=body Length (Max); g=grip Range (Min - Max); d h =Hole Size (Min - Max); d k =Flange Diameter (Max); k=flange Thickness (Max); r=rounding Radius; S=Nominal Shear Strength; T=Nominal Tensile Strength Bom is registered trademark. Copyright Alcoa Inc. 18 emhart.eu

FloorTight Self countersinking head - ideal for use on timber flooring and phenolic faced plywood Superior strength to conventional flooring screws 3 clamp strengths available to suit your joint - no crushing or pulling through the board Wide grip range Steel Plymetal Fastener Standard Head k DESCRIPTION PACK PACK d l g d h d k k r S T ARTICLE BOX QTY ARTICLE BOX QTY N N d k 8.3 8.26 53.98 19.05-34.93 PMF-R10-20 * * * * 19127 13345 09240 700 64004 100 63.5 19.05-41.28 PMF-R10-26 * * * * 19127 13345 09239 500 64005 100 Steel Plymetal Fastener Standard Head 8.3 7.90 50.8 19.1-34.9 PWF-R10-20 * * * * 19127 13345 47627 500 47628 100 60.3 19.1-41.3 PWF-R10-26 * * * * 19127 13345 47629 500 47630 100 * Contact Emhart Customer Service Team d=nominal Diameter, Min - Max Diameter; l=body Length (Max); g=grip Range (Min - Max); d h =Hole Size (Min - Max); d k =Flange Diameter (Max); k=flange Thickness (Max); r=rounding Radius; S=Nominal Shear Strength; T=Nominal Tensile Strength FloorTight is registered trademark. Copyright Alcoa Inc. emhart.eu 19

Magna-Grip Aluminium Pin Button Head Very wide grip range One pin and one collar cover a wide variety of applications Wide grip range minimises fastener inventory Flush pinbreak - No catching on clothes, skin or goods d k k DESCRIPTION CLAMP PACK PACK d l g d h d k k S T ARTICLE BOX QTY ARTICLE BOX QTY N N N 4.65-4.75 6.22-6.32 7.9 7.80-7.90 9.5 9.37-9.53 46.3 1.6-15.9 MGPB-E6-10 5.0-5.2 10.0 3.2 2447 3336 4003 90031 2,500 47706 500 51.9 7.9-31.8 MGPB-E6-20 5.0-5.2 10.0 3.2 2447 3336 4003 47707 2,000 47708 500 50.8 1.6-15.9 MGPB-E8-10 6.6-6.7 13.2 3.9 4226 5338 7206 90032 1,200 47710 400 65.9 7.9-31.8 MGPB-E8-20 6.6-6.7 13.2 3.9 4226 5338 7206 47709 1,000 47711 250 60.3 3.2-19.1 MGPB-E10-12 8.2-8.3 16.5 5.1 7117 9786 11121 47712 750 47713 250 73.0 15.9-34.9 MGPB-E10-22 8.2-8.3 16.5 5.1 7117 9786 11121 47714 600 47715 150 74.6 3.2-22.2 MGPB-E12-14 9.8-9.9 19.8 6.3 10676 13345 17793 47716 400 47717 100 89.8 20.6-41.3 MGPB-E12-26 9.8-9.9 19.8 6.3 10676 13345 17793 47718 350 47719 50 Pin Truss Head 6.22-6.32 7.9 7.8-7.9 9.5 9.37-9.53 50.8 1.6-15.9 MGPT-E8-10 6.6-6.7 15.1 3.0 4226 5338 7206 47723 1,200 47724 200 65.9 7.9-31.8 MGPT-E8-20 6.6-6.7 15.1 3.0 4226 5338 7206 47725 1,000 47726 200 60.3 3.2-19.1 MGPT-E10-12 8.2-8.3 20.4 3.6 7117 9786 11121 47727 700 47728 100 73.0 15.9-34.9 MGPT-E10-22 8.2-8.3 20.4 3.6 7117 9786 11121 47729 500 47730 100 74.6 3.2-22.2 MGPT-E12-14 9.8-9.9 23.6 4.3 10676 13345 17793 47731 380 47732 95 89.8 20.6-41.3 MGPT-E12-26 9.8-9.9 23.6 4.3 10676 13345 17793 47733 330 47734 55 Pin Broad Truss Head 6.22-6.32 50.8 1.6-15.9 MGP30-E8-10 6.6-6.7 27.1 4.6 4226 5338 7206 47720 600 47721 100 Pin Rivet Head 4.65-4.75 46.3 1.6-15.9 MGP98T-E6-10 5.0-5.2 12.4 2.7 2447 3336 4003 90035 2,250 47722 450 MagnaGrip is registered trademark. Copyright Alcoa Inc. d=nominal Diameter, Min - Max Diameter; l=pin Length (Max); g=grip Range (Min - Max); d h =Hole Size (Min - Max); d k =Head Diameter (Max); k=head Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength 20 emhart.eu

Magna-Grip Aluminium Collar Standard Flange DESCRIPTION PACK PACK d l d h ARTICLE BOX QTY ARTICLE BOX QTY 7.2 MGC-F6 9.8 90037 14,000 47735 1,000 9.9 MGC-F8 13.2 90038 6,000 47736 500 7.9 9.5 11.3 MGC-F10 1 90039 2,750 47737 550 13.2 MGC-F12 19.6 90040 1,500 47738 500 d=pin Diameter (Nominal); l=collar Length (Max); d h =Head Diameter (Max) MagnaGrip is registered trademark. Copyright Alcoa Inc. emhart.eu 21

Magna-Grip Steel Pin Button Head Very wide grip range One pin and one collar cover a wide variety of applications Wide grip range minimises fastener inventory Flush pinbreak - No catching on clothes, skin or goods d k k DESCRIPTION CLAMP PACK PACK d l g d h d k k S T ARTICLE BOX QTY ARTICLE BOX QTY N N N 4.65-4.75 6.22-6.32 7.9 7.8-7.9 9.5 9.37-9.53 46.3 1.6-15.9 MGPB-R6-10G 5.0-5.2 10.0 3.2 4115 7673 6228 47739 2,500 47740 500 51.9 7.9-31.8 MGPB-R6-20G 5.0-5.2 10.0 3.2 4115 7673 6228 47741 1,500 47742 500 50.8 1.6-15.9 MGPB-R8-10G 6.6-6.7 13.2 3.9 5338 9786 11343 47743 1,500 47744 500 65.9 7.9-31.8 MGPB-R8-20G 6.6-6.7 13.2 3.9 5338 9786 11343 47745 1,000 47746 250 60.3 3.2-19.1 MGPB-R10-12G 8.2-8.3 16.5 5.1 9564 13345 17393 90041 700 47747 100 73.0 15.9-34.9 MGPB-R10-22G 8.2-8.3 16.5 5.1 9564 13345 17393 90042 600 47748 100 74.6 3.2-22.2 MGPB-R12-14G 9.8-9.9 19.8 6.3 14234 18683 25021 47749 400 47750 100 89.8 20.6-41.3 MGPB-R12-26G 9.8-9.9 19.8 6.3 14234 18683 25021 47751 350 47752 50 Pin Flush Head 4.65-4.75 6.22-6.32 7.9 7.8-7.9 9.5 9.37-9.53 46.3 1.6-15.9 MGP90-R6-10G 5.0-5.2 9.1 2.6 4115 7673 6228 47753 3,000 47754 500 65.9 7.9-31.8 MGP90-R6-20G 5.0-5.2 9.1 2.2 4115 7673 6228 47755 2,000 47756 500 50.8 1.6-15.9 MGP90-R8-10G 6.6-6.7 12.1 3.3 5338 9786 11343 47757 1,500 47758 500 65.9 7.9-31.8 MGP90-R8-20G 6.6-6.7 12.1 2.9 5338 9786 11343 47759 1,200 47760 400 59.2 3.2-19.1 MGP90-R10-12G 8.2-8.3 15.1 4.1 9564 13345 17393 47761 900 47762 150 71.9 15.9-34.9 MGP90-R10-22G 8.2-8.3 15.1 3.6 9564 13345 17393 47763 650 47764 50 73.9-22.2 MGP90-R12-14G 9.8-9.9 18.1 5.0 14234 18683 25021 47765 500 47766 100 89.8 20.6-41.3 MGP90-R12-26G 9.8-9.9 18.1 4.3 14234 18683 25021 90043 350 47767 50 Pin Broad Truss Head 4.65-4.75 6.22-6.32 7.9 7.8-7.9 9.5 9.37-9.53 46.3 1.6-15.9 MGP98T-R6-10G 5.0-5.2 12.4 2.7 4115 7673 6228 47768 2,000 47769 500 61.1 7.9-31.8 MGP98T-R6-20G 5.0-5.2 12.4 2.7 4115 7673 6228 47770 1,500 47771 500 50.8 1.6-15.9 MGPT-R8-10G 6.6-6.7 15.1 3.0 5338 9786 11343 47772 1,500 47773 500 65.9 7.9-31.8 MGPT-R8-20G 6.6-6.7 15.1 3.0 5338 9786 11343 47774 1,000 47775 250 60.3 3.2-19.1 MGPT-R10-12G 8.2-8.3 20.4 3.6 9564 13345 17393 47776 700 47777 100 73.0 15.9-34.9 MGPT-R10-22G 8.2-8.3 20.4 3.6 9564 13345 17393 47778 500 47779 100 74.6 3.2-22.2 MGPT-R12-14G 9.8-9.9 23.6 4.3 14234 18683 25021 47780 380 47781 95 89.8 20.6-41.3 MGPT-R12-26G 9.8-9.9 23.6 4.3 14234 18683 25021 47782 330 47783 55 MagnaGrip is registered trademark. Copyright Alcoa Inc. d=nominal Diameter, Min - Max Diameter; l=pin Length (Max); g=grip Range (Min - Max); d h =Hole Size (Min - Max); d k =Head Diameter (Max); k=head Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength 22 emhart.eu

Magna-Grip Steel Collar Standard Flange DESCRIPTION PACK PACK d l d h ARTICLE BOX QTY ARTICLE BOX QTY 4.65-4.75 6.22-6.32 7.9 7.8-7.9 9.5 9.37-9.53 7.4 MGC-R6U 10.0 47784 10,000 48150 1,000 9.9 MGC-R8U 13.2 48151 5,000 48152 500 11.5 MGC-R10U 1 90046 2,750 48153 550 13.2 MGC-R12U 19.6 48154 1,500 48155 300 Collar Large Flange 4.65-4.75 6.22-6.32 8.1 MGCW-R6U 19.3 48156 4,250 48157 425 11.9 MGCW-R8U 25.7 48158 1,800 48159 450 d=pin Diameter (Nominal), Min - Max Diameter; l=collar Length (Max); d h =Head Diameter (Max) MagnaGrip is registered trademark. Copyright Alcoa Inc. emhart.eu 23

C6L C Lockbolt Aluminium Pin Brazier Head 5.8 grade small diameter Lockbolt Made to British Standard B7805: Part 1: 1997 - a mark of quality, safety and performance Wide flange collar available - enables installation into non metallic materials d k k DESCRIPTION CLAMP d l 1 l 2 l 3 g 1 g 2 d h d k k N 5-4.95 5-6.58 7.9 8.05-8.18 9.5 9.65-9.78 40.7 12.2 3.2 3.2-2.0-5.2 C6LB-C6-3 5.0-5.2 9.9 3.2 2447 42.3 13.7-7.9 3.6-6.8 C6LB-C6-4 5.0-5.2 9.9 3.2 2447 43.9 15.3-9.5 5.2-8.4 C6LB-C6-5 5.0-5.2 9.9 3.2 2447 50.2 21.7 12.7 12.7-15.9 11.5-14.7 C6LB-C6-9 5.0-5.2 9.9 3.2 2447 43.6 14.5 3.2 3.2-1.6 - C6LB-C8-3 6.6-6.8 13.2 3.9 4226 45.2 16.1-7.9 3.2-6.3 C6LB-C8-4 6.6-6.8 13.2 3.9 4226 48.4 19.2 7.9 7.9-11.1 6.3-9.5 C6LB-C8-6 6.6-6.8 13.2 3.9 4226 54.7 25.6 14.3 14.3-17.5 12.7-15.9 C6LB-C8-10 6.6-6.8 13.2 3.9 4226 51.9 19.7 3.2 3.2-9.5 1.2-7.5 C6LB-C10-4 8.2-8.3 16.5 5.1 6672 55.1 22.9-12.7 4.4-10.7 C6LB-C10-6 8.2-8.3 16.5 5.1 6672 58.3 26.1 9.5 9.5-15.9 7.5-13.9 C6LB-C10-8 8.2-8.3 16.5 5.1 6672 60.5 2-12.7 4.0-10.3 C6LB-C12-6 9.8-9.9 19.8 6.3 9786 63.7 28 9.5 9.5-15.9 7.1-13.5 C6LB-C12-8 9.8-9.9 19.8 6.3 9786 66.8 31.2 12.7 12.7-19.1 10.3-16.7 C6LB-C12-10 9.8-9.9 19.8 6.3 9786 70 34.4 15.9 15.9-22.2 13.5-19.8 C6LB-C12-12 9.8-9.9 19.8 6.3 9786 Collar Standard Flange Collar Large Flange DESCRIPTION PACK PACK d 1 l ARTICLE BOX QTY ARTICLE BOX QTY 8.1 6.2 2LC-F6 48815 18,000 47816 1,000 10.6 8.1 2LC-F8 90029 8,250 47817 500 12.8 9.5 2LC-F10 47818 4,500 47819 500 15.4 11.9 2LC-F12 47820 2,500 47821 500 DESCRIPTION PACK PACK d 1 l ARTICLE BOX QTY ARTICLE BOX QTY 10 7.4 3LC-F6 47822 14,000 47823 1,000 13.2 9.6 3LC-F8 47824 6,000 47825 500 1 10.8 3LC-F10 47826 3,500 47827 500 19.7 13.5 3LC-F12 47828 1,900 47829 380 d=nominal Diameter, Min - Max Diameter; l 1 =Pin Length (Max); l 2 =Length to Crimp; l 3 =Ungrooved Length; g 1 =Grip Range with Standard Collar; g 2 =Grip Range with Large Flange Collar; d h =Hole Size (Min - Max); d k =Head Diameter (Max); k=head Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength; d 1 =Collar Diameter; l=collar Length C6L is registered trademark. Copyright Alcoa Inc. 24 emhart.eu

C6L C Lockbolt DESCRIPTION PACK PACK S T ARTICLE BOX QTY ARTICLE BOX QTY N N C6LB-C6-3 C6LB-C6-4 C6LB-C6-5 C6LB-C6-9 C6LB-C8-3 C6LB-C8-4 C6LB-C8-6 C6LB-C8-10 C6LB-C10-4 C6LB-C10-6 C6LB-C10-8 C6LB-C12-6 C6LB-C12-8 C6LB-C12-10 C6LB-C12-12 4671 4448 47785 3,200 47786 400 4671 4448 47787 3,200 47788 400 4671 4448 47789 3,000 47790 500 4671 4448 47791 2,500 47792 500 7200 8007 90030 1,850 47793 370 7200 8007 90028 1,800 47794 450 7200 8007 47795 1,500 47796 500 7200 8007 47797 1,300 47798 325 1140 12677 47799 1,000 47800 250 1140 12677 47801 900 47802 300 1140 12677 47803 900 47804 300 1680 18683 47807 500 47808 100 1680 18683 47809 500 47810 100 1680 18683 47811 450 47812 50 1680 18683 47813 400 47814 100 5-4.95 5-6.58 7.9 8.05-8.18 9.5 9.65-9.78 C6L is registered trademark. Copyright Alcoa Inc. emhart.eu 25

C6L R Lockbolt Steel Pin Brazier Head 5.8 grade small diameter Lockbolt Made to British Standard B7805: Part 1: 1997 - a mark of quality, safety and performance Wide flange collar available - enables installation into non metallic materials d k k DESCRIPTION CLAMP d l 1 l 2 l 3 g 1 g 2 d h d k k N 5-4.95 5-6.58 7.9 8.05-8.18 9.5 9.65-9.78 39.1 10.6 1.6 1.6-0.4-3.6 C6LB-R6-2G 5.0-5.2 9.9 3.2 4559 40.7 12.2 3.2 3.2-2.0-5.2 C6LB-R6-3G 5.0-5.2 9.9 3.2 4559 42.3 13.7-7.9 3.6-6.8 C6LB-R6-4G 5.0-5.2 9.9 3.2 4559 43.9 15.3-9.5 5.2-8.4 C6LB-R6-5G 5.0-5.2 9.9 3.2 4559 45.4 16.9 7.9 7.9-11.1 6.8-9.9 C6LB-R6-6G 5.0-5.2 9.9 3.2 4559 47 18.5 9.5 9.5-12.7 8.4-11.5 C6LB-R6-7G 5.0-5.2 9.9 3.2 4559 42 12.9 1.6 1.6-0.0-3.2 C6LB-R8-2G 6.6-6.8 13.2 3.9 8029 43.6 14.5 3.2 3.2-1.6 - C6LB-R8-3G 6.6-6.8 13.2 3.9 8029 45.2 16.1-7.9 3.2-6.3 C6LB-R8-4G 6.6-6.8 13.2 3.9 8029 46.8 17.6-9.5-7.9 C6LB-R8-5G 6.6-6.8 13.2 3.9 8029 48.4 19.2 7.9 7.9-11.1 6.3-9.5 C6LB-R8-6G 6.6-6.8 13.2 3.9 8029 51.6 22.4 11.1 11.1-14.3 9.5-12.7 C6LB-R8-8G 6.6-6.8 13.2 3.9 8029 53.2 24 12.7 12.7-15.9 11.1-14.3 C6LB-R8-9G 6.6-6.8 13.2 3.9 8029 54.7 25.6 14.3 14.3-17.5 12.7-15.9 C6LB-R8-10G 6.6-6.8 13.2 3.9 8029 57.9 28.8 17.5 17.5-20.6 15.9-19.0 C6LB-R8-12G 6.6-6.8 13.2 3.9 8029 61.1 31.9 20.6 20.6-23.8 19.0-22.2 C6LB-R8-14G 6.6-6.8 13.2 3.9 8029 67.4 38.3 27 27.0-30.2 25.4-28.6 C6LB-R8-18G 6.6-6.8 13.2 3.9 8029 70.6 41.5 30.2 30.2-33.3 28.6-31.7 C6LB-R8-20G 6.6-6.8 13.2 3.9 8029 51.9 19.7 3.2 3.2-9.5 1.2-7.5 C6LB-R10-4G 8.2-8.3 16.5 5.1 12500 55.1 22.9-12.7 4.4-10.7 C6LB-R10-6G 8.2-8.3 16.5 5.1 12500 58.3 26.1 9.5 9.5-15.9 7.5-13.9 C6LB-R10-8G 8.2-8.3 16.5 5.1 12500 61.5 29.2 12.7 12.7-19.1 10.7-17.1 C6LB-R10-10G 8.2-8.3 16.5 5.1 12500 67.8 35.6 19.1 19.1-25.4 17.1-23.4 C6LB-R10-14G 8.2-8.3 16.5 5.1 12500 74.2 41.9 25.4 25.4-31.8 23.4-29.8 C6LB-R10-18G 8.2-8.3 16.5 5.1 12500 57.3 21.7 3.2 3.2-9.5 0.8-7.1 C6LB-R12-4G 9.8-9.9 19.8 6.3 17882 63.7 28 9.5 9.5-15.9 7.1-13.5 C6LB-R12-8G 9.8-9.9 19.8 6.3 17882 73.2 37.5 19.1 19.1-25.4 16.7-23 C6LB-R12-14G 9.8-9.9 19.8 6.3 17882 Collar Standard Flange Collar Large Flange DESCRIPTION PACK PACK d 1 l ARTICLE BOX QTY ARTICLE BOX QTY 8.1 6.2 2LC-R6G 90023 15,000 47876 1,000 10.6 8.1 2LC-R8G 90024 5,000 47877 500 12.8 9.5 2LC-R10G 90025 3,000 47878 500 15.4 11.9 2LC-R12G 90026 2,000 47879 500 DESCRIPTION PACK PACK d 1 l ARTICLE BOX QTY ARTICLE BOX QTY 10 7.4 3LC-2R6G 47880 1,0000 47881 500 13.2 9.6 3LC-2R8G 47882 4,000 47883 500 1 10.8 3LC-2R10G 47884 2,500 47885 500 19.7 13.5 3LC-2R12G 47886 1,500 47887 300 d=nominal Diameter, Min - Max Diameter; l 1 =Pin Length (Max); l 2 =Length to Crimp; l 3 =Ungrooved Length; g 1 =Grip Range with Standard Collar; g 2 =Grip Range with Large Flange Collar; d h =Hole Size (Min - Max); d k =Head Diameter (Max); k=head Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength; d 1 =Collar Diameter; l=collar Length C6L is registered trademark. Copyright Alcoa Inc. 26 emhart.eu

C6L R Lockbolt DESCRIPTION PACK PACK S T ARTICLE BOX QTY ARTICLE BOX QTY N N C6LB-R6-2G C6LB-R6-3G C6LB-R6-4G C6LB-R6-5G C6LB-R6-6G C6LB-R6-7G C6LB-R8-2G C6LB-R8-3G C6LB-R8-4G C6LB-R8-5G C6LB-R8-6G C6LB-R8-8G C6LB-R8-9G C6LB-R8-10G C6LB-R8-12G C6LB-R8-14G C6LB-R8-18G C6LB-R8-20G C6LB-R10-4G C6LB-R10-6G C6LB-R10-8G C6LB-R10-10G C6LB-R10-14G C6LB-R10-18G C6LB-R12-4G C6LB-R12-8G C6LB-R12-14G 7673 6228 99363 3,000 47830 500 7673 6228 47831 3,000 47832 500 7673 6228 47833 3,000 47834 500 7673 6228 47835 3,000 47836 500 7673 6228 47837 2,000 47838 500 7673 6228 47839 2,500 47840 500 13567 11343 90008 1,500 47841 300 13567 11343 47842 1,500 47843 300 13567 11343 90009 1,500 47844 300 13567 11343 47845 1,500 47846 300 13567 11343 90010 1,500 47847 300 13567 11343 90011 1,000 47848 250 13567 11343 47849 1,000 47850 250 13567 11343 90012 1,000 47851 250 13567 11343 47852 1,000 47853 250 13567 11343 47854 1,000 47855 250 13567 11343 47856 1,000 47857 250 13567 11343 47858 1,000 47859 250 21018 17393 47860 800 47861 200 21018 17393 47862 800 47863 200 21018 17393 47864 800 47865 200 21018 17393 90015 600 47866 200 21018 17393 47867 500 47868 100 21018 17393 47869 500 47868 100 30359 25021 47871 500 47872 100 30359 25021 47873 500 47874 100 30359 25021 90018 400 47875 100 5-4.95 5-6.58 7.9 8.05-8.18 9.5 9.65-9.78 C6L is registered trademark. Copyright Alcoa Inc. emhart.eu 27

C6L U Lockbolt Stainless Steel Pin Brazier Head 5.8 grade small diameter Lockbolt Made to British Standard B7805: Part 1: 1997 - a mark of quality, safety and performance Wide flange collar available - enables installation into non metallic materials d k DESCRIPTION CLAMP d l 1 l 2 l 3 g 1 g 2 d h d k k N 5-4.95 5-6.58 7.9 8.05-8.18 9.5 9.65-9.78 39.1 10.6 1.6 1.6-0.4-3.6 C6LB-U6-2 5.0-5.2 9.9 3.2 4559 40.7 12.2 3.2 3.2-2.0-5.2 C6LB-U6-3 5.0-5.2 9.9 3.2 4559 42.3 13.7-7.9 3.6-6.8 C6LB-U6-4 5.0-5.2 9.9 3.2 4559 43.9 15.3-9.5 5.2-8.4 C6LB-U6-5 5.0-5.2 9.9 3.2 4559 45.4 16.9 7.9 7.9-11.1 6.8-9.9 C6LB-U6-6 5.0-5.2 9.9 3.2 4559 45.2 16.1-7.9 3.2-6.3 C6LB-U8-4 6.6-6.8 13.2 3.9 8029 48.4 19.2 7.9 7.9-11.1 6.3-9.5 C6LB-U8-6 6.6-6.8 13.2 3.9 8029 50.0 20.8 9.5 9.5-12.7 7.9-11.1 C6LB-U8-7 6.6-6.8 13.2 3.9 8029 51.6 22.4 11.1 11.1-14.3 9.5-12.7 C6LB-U8-8 6.6-6.8 13.2 3.9 8029 51.9 19.7 3.2 3.2-9.5 1.2-7.5 C6LB-U10-4 8.2-8.3 16.5 5.1 12500 55.1 22.9-12.7 4.4-10.7 C6LB-U10-6 8.2-8.3 16.5 5.1 12500 57.3 21.7 3.2 3.2-9.5 0.8-7.1 C6LB-U12-4 9.8-9.9 19.8 6.3 17882 60.5 2-12.7 4.0-10.3 C6LB-U12-6 9.8-9.9 19.8 6.3 17882 63.7 28 9.5 9.5-15.9 7.1-13.5 C6LB-U12-8 9.8-9.9 19.8 6.3 17882 66.8 31.2 12.7 12.7-19.1 10.3-16.7 C6LB-U12-10 9.8-9.9 19.8 6.3 17882 70.0 34.4 15.9 15.9-22.2 13.5-19.8 C6LB-U12-12 9.8-9.9 19.8 6.3 17882 Collar Standard Flange Collar Large Flange DESCRIPTION PACK PACK d 1 l ARTICLE BOX QTY ARTICLE BOX QTY 8.1 6.2 2LC-2CU6 47920 14,000 47921 1,000 10.6 8.1 2LC-2CU8 47922 7,000 47923 500 12.8 9.5 2LC-2CU10 47924 4,500 47925 500 15.4 11.9 2LC-2CU12 47926 2,000 47927 500 DESCRIPTION PACK PACK d 1 l ARTICLE BOX QTY ARTICLE BOX QTY 10 7.4 3LC-2CU6 47928 11,000 47929 1,000 13.2 9.6 3LC-2CU8 47930 5,000 47931 500 1 10.8 3LC-2CU10 47932 2,250 47933 450 19.7 13.5 3LC-2CU12 47934 1,500 47935 500 d=nominal Diameter, Min - Max Diameter; l 1 =Pin Length (Max); l 2 =Length to Crimp; l 3 =Ungrooved Length; g 1 =Grip Range with Standard Collar; g 2 =Grip Range with Large Flange Collar; d h =Hole Size (Min - Max); d k =Head Diameter (Max); k=head Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength; d 1 =Collar Diameter; l=collar Length C6L is registered trademark. Copyright Alcoa Inc. 28 emhart.eu

C6L U Lockbolt DESCRIPTION PACK PACK S T ARTICLE BOX QTY ARTICLE BOX QTY N N C6LB-U6-2 C6LB-U6-3 C6LB-U6-4 C6LB-U6-5 C6LB-U6-6 C6LB-U8-4 C6LB-U8-6 C6LB-U8-7 C6LB-U8-8 C6LB-U10-4 C6LB-U10-6 C6LB-U12-4 C6LB-U12-6 C6LB-U12-8 C6LB-U12-10 C6LB-U12-12 8896 * 47888 3,300 47889 550 8896 * 47890 3,000 47891 500 8896 * 47892 3,200 47893 400 8896 * 47894 3,000 47895 500 8896 * 47896 2,500 47897 500 15791 * 47898 1,500 47899 500 15791 * 47900 1,500 47901 500 15791 * 47902 1,500 47903 500 15791 * 47904 1,000 47905 250 24576 * 47906 900 47907 300 24576 * 47908 900 47909 300 35363 * 47910 550 47911 110 35363 * 47912 500 47913 100 35363 * 47914 500 47915 100 35363 * 47916 450 47917 75 35363 * 47918 400 47919 100 5-4.95 5-6.58 7.9 8.05-8.18 9.5 9.65-9.78 * Contact Emhart Customer Service Team C6L is registered trademark. Copyright Alcoa Inc. emhart.eu 29

C50L Lockbolt Steel Pin Round Head 8.8 grade large diameter Lockbolt Made to British Standard B7805: Part 2: 1997 - a mark of quality, safety and performance High tensile friction grip fastener d k k DESCRIPTION CLAMP d l 1 l 2 l 3 g 1 g 2 d h d k k N 12.7 12.52-13.08 15.9 15.67-16.31 85.6 31.5-12.7 3.2-9.5 C50LR-BR16-4 13.1-14.3 24.0 8.4 53601 92.0 37.8 11.1 12.7-19.1 9.5-15.9 C50LR-BR16-8 13.1-14.3 24.0 8.4 53601 98.3 44.2 17.5 19.1-25.4 15.9-22.2 C50LR-BR16-12 13.1-14.3 24.0 8.4 53601 104.7 50.5 23.8 25.4-31.8 22.2-28.6 C50LR-BR16-16 13.1-14.3 24.0 8.4 53601 111.0 56.9 30.2 31.8-38.1 28.6-34.9 C50LR-BR16-20 13.1-14.3 24.0 8.4 53601 117.4 63.2 36.5 38.1-44.5 34.9-41.3 C50LR-BR16-24 13.1-14.3 24.0 8.4 53601 123.7 69.6 42.9 44.5-50.8 41.3-47.6 C50LR-BR16-28 13.1-14.3 24.0 8.4 53601 130.1 75.9 49.2 50.8-57.2 47.6-54.0 C50LR-BR16-32 13.1-14.3 24.0 8.4 53601 13 82.3 55.6 57.2-63.5 54.0-60.3 C50LR-BR16-36 13.1-14.3 24.0 8.4 53601 142.8 88.6 61.9 63.5-69.9 60.3-66.7 C50LR-BR16-40 13.1-14.3 24.0 8.4 53601 149.1 95.0 68.3 69.9-76.2 66.7-73.0 C50LR-BR16-44 13.1-14.3 24.0 8.4 53601 155.5 101.3 74.6 76.2-82.6 73.0-79.4 C50LR-BR16-48 13.1-14.3 24.0 8.4 53601 161.8 107.7 81.0 82.6-88.9 79.4-85.7 C50LR-BR16-52 13.1-14.3 24.0 8.4 53601 97.9 37.0-12.7 2.4-8.7 C50LR-BR20-4 16.3-17.5 30.3 10.6 85406 104.2 43.4 11.1 12.7-19.1 8.7-15.1 C50LR-BR20-8 16.3-17.5 30.3 10.6 85406 110.6 49.7 17.5 19.1-25.4 15.1-21.4 C50LR-BR20-12 16.3-17.5 30.3 10.6 85406 116.9 56.1 23.8 25.4-31.8 21.4-27.8 C50LR-BR20-16 16.3-17.5 30.3 10.6 85406 123.3 62.4 30.2 31.8-38.1 27.8-34.1 C50LR-BR20-20 16.3-17.5 30.3 10.6 85406 129.6 68.8 36.5 38.1-44.5 34.1-40.5 C50LR-BR20-24 16.3-17.5 30.3 10.6 85406 136.0 75.1 42.9 44.5-50.8 40.5-46.8 C50LR-BR20-28 16.3-17.5 30.3 10.6 85406 142.3 81.5 49.2 50.8-57.2 46.8-53.2 C50LR-BR20-32 16.3-17.5 30.3 10.6 85406 148.7 87.8 55.6 57.2-63.5 53.2-59.5 C50LR-BR20-36 16.3-17.5 30.3 10.6 85406 155.0 94.2 61.9 63.5-69.9 59.5-65.9 C50LR-BR20-40 16.3-17.5 30.3 10.6 85406 161.4 100.5 68.3 69.9-76.2 65.9-72.2 C50LR-BR20-44 16.3-17.5 30.3 10.6 85406 167.7 106.9 74.6 76.2-82.6 72.2-78.6 C50LR-BR20-48 16.3-17.5 30.3 10.6 85406 174.1 113.2 81.0 82.6-88.9 78.6-84.9 C50LR-BR20-52 16.3-17.5 30.3 10.6 85406 180.4 119.6 87.3 88.9-95.3 84.9-91.3 C50LR-BR20-56 16.3-17.5 30.3 10.6 85406 186.8 125.9 93.7 95.3-101.6 91.3-97.6 C50LR-BR20-60 16.3-17.5 30.3 10.6 85406 193.1 132.3 100.0 101.6-108.0 97.6-104.0 C50LR-BR20-64 16.3-17.5 30.3 10.6 85406 199.5 138.6 10 108.0-114.3 104.0-110.3 C50LR-BR20-68 16.3-17.5 30.3 10.6 85406 205.8 145.0 112.7 114.3-120.7 110.03-116.7 C50LR-BR20-72 16.3-17.5 30.3 10.6 85406 Collar Standard Flange DESCRIPTION PACK PACK d 1 l ARTICLE BOX QTY ARTICLE BOX QTY 20.5 1 LC-2R16-G 04135 800 25.0 21.8 LC-2R20-G 04136 400 d=nominal Diameter, Min - Max Diameter; l 1 =Pin Length (Max); l 2 =Length to Crimp; l 3 =Ungrooved Length; g 1 =Grip Range with Standard Collar; g 2 =Grip Range with Large Flange Collar; d h =Hole Size (Min - Max); d k =Head Diameter (Max); k=head Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength; d 1 =Collar Diameter; l=collar Length C50L is registered trademark. Copyright Alcoa Inc. 30 emhart.eu

C50L Lockbolt DESCRIPTION PACK PACK S T ARTICLE BOX QTY ARTICLE BOX QTY N N C50LR-BR16-4 C50LR-BR16-8 C50LR-BR16-12 C50LR-BR16-16 C50LR-BR16-20 C50LR-BR16-24 C50LR-BR16-28 C50LR-BR16-32 C50LR-BR16-36 C50LR-BR16-40 C50LR-BR16-44 C50LR-BR16-48 C50LR-BR16-52 C50LR-BR20-4 C50LR-BR20-8 C50LR-BR20-12 C50LR-BR20-16 C50LR-BR20-20 C50LR-BR20-24 C50LR-BR20-28 C50LR-BR20-32 C50LR-BR20-36 C50LR-BR20-40 C50LR-BR20-44 C50LR-BR20-48 C50LR-BR20-52 C50LR-BR20-56 C50LR-BR20-60 C50LR-BR20-64 C50LR-BR20-68 C50LR-BR20-72 64054 75842 04109 200 64054 75842 04111 200 64054 75842 04113 150 64054 75842 04114 150 64054 75842 09238 150 64054 75842 09112 100 64054 75842 09237 150 64054 75842 04115 100 64054 75842 09236 100 64054 75842 09235 100 64054 75842 09234 100 64054 75842 09233 100 64054 75842 09232 100 100085 120547 04116 100 100085 120547 04118 100 100085 120547 04120 110 100085 120547 04122 100 100085 120547 04123 75 100085 120547 04124 75 100085 120547 09232 75 100085 120547 09230 75 100085 120547 04125 75 100085 120547 09229 75 100085 120547 09228 75 100085 120547 09227 100 100085 120547 09226 50 100085 120547 09225 50 100085 120547 09224 50 100085 120547 09223 50 100085 120547 09222 50 100085 120547 09221 50 12.7 12.52-13.08 15.9 15.67-16.31 Collar Large Flange DESCRIPTION PACK PACK d 1 l ARTICLE BOX QTY ARTICLE BOX QTY 2 19.5 3LC-2R16-G 04143 500 32.5 24.6 3LC-2R20-G 04145 300 C50L is registered trademark. Copyright Alcoa Inc. emhart.eu 31

C50L Lockbolt Steel Pin Round Head 8.8 grade large diameter Lockbolt Made to British Standard B7805: Part 2: 1997 - a mark of quality, safety and performance High tensile friction grip fastener d k DESCRIPTION CLAMP d l 1 l 2 l 3 g 1 g 2 d h d k k N 19.1 18.82-19.51 110.6 39.2-12.7 1.6-8.0 C50LR-BR24-4 19.5-20.7 36.7 13.3 126329 116.9 45.5 11.1 12.7-19.1 8.0-14.3 C50LR-BR24-8 19.5-20.7 36.7 13.3 126329 123.3 51.9 17.5 19.1-25.4 14.3-20.7 C50LR-BR24-12 19.5-20.7 36.7 13.3 126329 129.6 58.2 23.8 25.4-31.8 20.7-27.0 C50LR-BR24-16 19.5-20.7 36.7 13.3 126329 136.0 64.6 30.2 31.8-38.1 27.0-33.4 C50LR-BR24-20 19.5-20.7 36.7 13.3 126329 142.3 70.9 36.5 38.1-44.5 33.4-39.7 C50LR-BR24-24 19.5-20.7 36.7 13.3 126329 148.7 77.3 42.9 44.5-50.8 39.7-46.1 C50LR-BR24-28 19.5-20.7 36.7 13.3 126329 155.0 83.6 49.2 50.8-57.2 46.1-52.4 C50LR-BR24-32 19.5-20.7 36.7 13.3 126329 161.4 90.0 55.6 57.2-63.5 52.4-58.8 C50LR-BR24-36 19.5-20.7 36.7 13.3 126329 167.7 96.3 61.9 63.5-69.9 58.8-65.1 C50LR-BR24-40 19.5-20.7 36.7 13.3 126329 174.1 102.7 68.3 69.9-76.2 65.1-71.5 C50LR-BR24-44 19.5-20.7 36.7 13.3 126329 180.4 109.0 74.6 76.2-82.6 71.5-77.8 C50LR-BR24-48 19.5-20.7 36.7 13.3 126329 186.8 115.4 81.0 82.6-88.9 77.8-84.2 C50LR-BR24-52 19.5-20.7 36.7 13.3 126329 193.1 121.7 87.3 88.9-95.3 84.2-90.5 C50LR-BR24-56 19.5-20.7 36.7 13.3 126329 199.5 128.1 93.7 95.3-101.6 90.5-96.9 C50LR-BR24-60 19.5-20.7 36.7 13.3 126329 205.8 134.4 100.0 101.6-108.0 96.9-103.2 C50LR-BR24-64 19.5-20.7 36.7 13.3 126329 212.2 140.8 10 108.0-114.3 103.2-109.6 C50LR-BR24-68 19.5-20.7 36.7 13.3 126329 218.5 147.1 112.7 114.3-120.7 109.6-115.9 C50LR-BR24-72 19.5-20.7 36.7 13.3 126329 224.9 153.5 119.1 120.7-127.0 115.9-122.3 C50LR-BR24-76 19.5-20.7 36.7 13.3 126329 231.2 159.8 125.4 127.0-133.4 122.3-128.6 C50LR-BR24-80 19.5-20.7 36.7 13.3 126329 Collar Standard Flange DESCRIPTION PACK PACK d 1 l ARTICLE BOX QTY ARTICLE BOX QTY 30.1 24.5 LC-2R24G 09871 250 Collar Large Flange DESCRIPTION PACK PACK d 1 l ARTICLE BOX QTY ARTICLE BOX QTY 38.7 29.4 3LC-2R24G 09811 1 d=nominal Diameter, Min - Max Diameter; l 1 =Body Length; l 2 =Length to Crimp; l 3 =Ungrooved Length (Min Grip); g 1 =Grip Range with Standard Collar; g 2 =Grip Range with Large Flange Collar; d h =Hole Size (Min - Max); d k =Head Diameter (Max); k=head Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength; d 1 =Collar Diameter; l=collar Length C50L is registered trademark. Copyright Alcoa Inc. 32 emhart.eu

C50L Lockbolt DESCRIPTION PACK PACK S T ARTICLE BOX QTY ARTICLE BOX QTY N N C50LR-BR24-4 C50LR-BR24-8 C50LR-BR24-12 C50LR-BR24-16 C50LR-BR24-20 C50LR-BR24-24 C50LR-BR24-28 C50LR-BR24-32 C50LR-BR24-36 C50LR-BR24-40 C50LR-BR24-44 C50LR-BR24-48 C50LR-BR24-52 C50LR-BR24-56 C50LR-BR24-60 C50LR-BR24-64 C50LR-BR24-68 C50LR-BR24-72 C50LR-BR24-76 C50LR-BR24-80 144122 178374 09220 70 144122 178374 09219 60 144122 178374 04577 60 144122 178374 04129 60 144122 178374 09870 50 144122 178374 08540 50 144122 178374 09216 50 144122 178374 08541 50 144122 178374 09214 50 144122 178374 09213 40 144122 178374 05157 40 144122 178374 09211 40 144122 178374 09210 40 144122 178374 09209 40 144122 178374 09208 40 144122 178374 09207 40 144122 178374 09206 30 144122 178374 09205 30 144122 178374 09204 20 144122 178374 09203 20 19.1 18.82-19.51 C50L is registered trademark. Copyright Alcoa Inc. emhart.eu 33

Hucktainer Steel Pin Standard Low Profile Head Designed specifically for joining composite board in trailer applications Will not crush or damage the composite board Integral seal around pin head prevents moisture ingress Low profile on both sides when installed - No catching on clothes, skin or goods DESCRIPTION k d l 1 l 2 l 3 g d h d k k d k 9.5 58.5 16.0 3.2 14.3-17.5 HLPPLS-R12-10 10.3-10.7 21.2 3.4 61.7 19.2 5.6 17.5-20.6 HLPPLS-R12-12 10.3-10.7 21.2 3.4 6 22.4 8.8 20.6-23.8 HLPPLS-R12-14 10.3-10.7 21.2 3.4 68.0 25.5 11.9 23.8-27.0 HLPPLS-R12-16 10.3-10.7 21.2 3.4 71.2 28.7 15.1 27.0-30.2 HLPPLS-R12-18 10.3-10.7 21.2 3.4 74.4 31.9 18.3 30.2-33.3 HLPPLS-R12-20 10.3-10.7 21.2 3.4 Collar Standard Flange DESCRIPTION PACK PACK d 1 d 2 d 3 d 4 ARTICLE BOX QTY ARTICLE BOX QTY 12.0 9.53 HLPSC-R12 16.1 3.7 47702 2,500 47703 500 Collar Large Flange DESCRIPTION PACK PACK d 1 d 2 d 3 d 4 ARTICLE BOX QTY ARTICLE BOX QTY 12.0 9.53 HLPS-R12 29.6 3.7 47704 1,000 47705 250 Hucktainer is registered trademark. Copyright Alcoa Inc. d=nominal Diameter; l 1 =Total Pin Length (Max); l 2 =Length to Crimp (Max); l 3 =Ungrooved Length (Nom); g=grip Range (Min - Max); d h =Hole Size (Min - Max); d k =Head Diameter (Max); k=head Thickness (Max); d 1 =Collar Diameter; d 2 =Inner Bore Diameter; d 3 =Collar Flange Diameter; d 4 =Collat Flange Thickness 34 emhart.eu

Hucktainer DESCRIPTION PACK PACK S T ARTICLE BOX QTY ARTICLE BOX QTY N N HLPPLS-R12-10 HLPPLS-R12-12 HLPPLS-R12-14 HLPPLS-R12-16 HLPPLS-R12-18 HLPPLS-R12-20 3559 47690 500 47691 100 3559 47692 500 47693 100 3559 47694 500 47695 100 3559 47696 500 47697 100 3559 47698 500 47699 100 3559 47700 500 47701 100 9.5 Hucktainer is registered trademark. Copyright Alcoa Inc. emhart.eu 35

BOBTAIL The BOBTAIL System (fasteners and tooling) has been developed to deliver the highest level of performance and reliability. Engineered to meet the unique challenges of a wide range of assembly applications, BOBTAIL offers safe, quiet, swaged-on installation technology in an advanced lockbolt design. BOBTAIL is designed to deliver superior joining strength in even the most extreme environments. Available in a wide range of sizes and grades, BOBTAIL also offers quick and easy installation, and up to 10 times the fatigue strength of conventional nuts and bolts. Finally, when you factor in the cost of the fasteners with installation and inspection labor, BOBTAIL often provides an overall lower installed cost. BOBTAIL benefits: No pintail Unmatched installation speed Low overall installed cost Superior strength (fatigue) Vibration resistance Ergonomically designed installation tooling Silent installation No repetitive strain injuries Eliminates need for secondary operations No special training or skills required for installation personnel Quick visual inspection is all that s needed for a quality-assured joint Diameters available: 12, 14, 16 and 20. Different coatings and corrosion resistances are available upon request. Head style options Round Grade 5 Standard Class 8.8 available Truss Upon request Flanged Class 10.9 Standard Grade 8 Standard Standard head style and strength levels Diameter 12 14 16 20 Round Class 8.8 upon request Class 8.8 Class 8.8 upon request Class 8.8 upon request Flanged Class 10.9 Class 10.9, Class 8.8 Class 10.9 Class 10.9 90 Upon request 30 SS Cap 5/8, 16 Installed fastener values lbf (KN) Diameter Clamp Tensile Shear 12 (10.9) 14 (8.8) 14 (10.9) 16 (10.9) 20 (10.9) 14,700 (65.4) 15,000 (66.7) 19,500 (87) 26,000 (116) 40,700 (181) 19,700 (87.7) 21,500 (95.5) 27,000 (120) 36,600 (163) 57,300 (255) 18,500 (65.4) 18,500 (82.3) 21,100 (94) 26,000 (116) 41,000 (182) 36 emhart.eu

BOBTAIL Lightweight, technologically advanced tooling Newly designed BOBTAIL tooling makes the installation process quicker and easier by reducing the force required to install each fastener. More compact and lighter weight than previous Huck lockbolt production tooling, BOBTAIL installation tools also offer greater operator flexibility as well as extended reach into difficult areas. For tight, space-constrained applications, SWAGEFORWARD BOBTAIL tools allow the operator to position his or her hand at a safe distance from the working structure during installation. Safe and silent performance The BOBTAIL fastener is installed without a pin-break, contributing to the dramatic reduction of noise on the shop floor, and subsequently, improved worker hearing safety. Instances of foreign object damage (FOD) and loose pintail injuries are eliminated. Because BOBTAIL tooling features a smooth, shock-free installation sequence, repetitive stress injuries are eliminated, and overall safety is increased. Cost-efficient operation Smooth-operating BOBTAIL installation tooling directly contributes to longer tool and component life, while allowing extended tool maintenance cycles. As a result, costs for parts and overall support are reduced, while system uptime is increased. emhart.eu 37

BOBTAIL Steel Flanged Head No Pintail Unmatched installation speed Low overall installation cost Eliminates need for secondary operations Superior strength Vibration resistance d k k DESCRIPTION CLAMP d l 1 l 2 g d h d k k S T N N N 12.0 14.0 16.0 46.1 3.8 5.0-15.0 MBT-DT12-10 12.0-13.5 25.4 9.6 64900 65400 87700 51.1 3.8 10.0-20.0 MBT-DT12-15 12.0-13.5 25.4 9.6 64900 65400 87700 56.1 3.8 15.0-25.0 MBT-DT12-20 12.0-13.5 25.4 9.6 64900 65400 87700 61.1 3.8 20.0-30.0 MBT-DT12-25 12.0-13.5 25.4 9.6 64900 65400 87700 66.1 3.8 25.0-35.0 MBT-DT12-30 12.0-13.5 25.4 9.6 64900 65400 87700 71.1 3.8 30.0-40.0 MBT-DT12-35 12.0-13.5 25.4 9.6 64900 65400 87700 76.1 3.8 35.0-45.0 MBT-DT12-40 12.0-13.5 25.4 9.6 64900 65400 87700 81.1 3.8 40.0-50.0 MBT-DT12-45 12.0-13.5 25.4 9.6 64900 65400 87700 86.1 3.8 45.0-55.0 MBT-DT12-50 12.0-13.5 25.4 9.6 64900 65400 87700 91.1 3.8 50.0-60.0 MBT-DT12-55 12.0-13.5 25.4 9.6 64900 65400 87700 96.1 3.8 55.0-65.0 MBT-DT12-60 12.0-13.5 25.4 9.6 64900 65400 87700 101.1 3.8 60.0-70.0 MBT-DT12-65 12.0-13.5 25.4 9.6 64900 65400 87700 106.1 3.8 65.0-75.0 MBT-DT12-70 12.0-13.5 25.4 9.6 64900 65400 87700 111.1 3.8 70.0-80.0 MBT-DT12-75 12.0-13.5 25.4 9.6 64900 65400 87700 116.1 9.5 75.0-85.0 MBT-DT12-80 12.0-13.5 25.4 9.6 64900 65400 87700 49.0 3.8 5.0-15.0 MBT-DT14-10 14.0-15.5 30.0 11.5 87000 94000 120000 54.0 3.8 10.0-20.0 MBT-DT14-15 14.0-15.5 30.0 11.5 87000 94000 120000 59.0 3.8 15.0-25.0 MBT-DT14-20 14.0-15.5 30.0 11.5 87000 94000 120000 64.0 3.8 20.0-30.0 MBT-DT14-25 14.0-15.5 30.0 11.5 87000 94000 120000 69.0 3.8 25.0-35.0 MBT-DT14-30 14.0-15.5 30.0 11.5 87000 94000 120000 74.0 3.8 30.0-40.0 MBT-DT14-35 14.0-15.5 30.0 11.5 87000 94000 120000 79.0 3.8 35.0-45.0 MBT-DT14-40 14.0-15.5 30.0 11.5 87000 94000 120000 84.0 3.8 40.0-50.0 MBT-DT14-45 14.0-15.5 30.0 11.5 87000 94000 120000 89.0 3.8 45.0-55.0 MBT-DT14-50 14.0-15.5 30.0 11.5 87000 94000 120000 94.0 3.8 50.0-60.0 MBT-DT14-55 14.0-15.5 30.0 11.5 87000 94000 120000 99.0 3.8 55.0-65.0 MBT-DT14-60 14.0-15.5 30.0 11.5 87000 94000 120000 104.0 3.8 60.0-70.0 MBT-DT14-65 14.0-15.5 30.0 11.5 87000 94000 120000 109.0 3.8 65.0-75.0 MBT-DT14-70 14.0-15.5 30.0 11.5 87000 94000 120000 114.0 9.5 70.0-80.0 MBT-DT14-75 14.0-15.5 30.0 11.5 87000 94000 120000 119.0 9.5 75.0-85.0 MBT-DT14-80 14.0-15.5 30.0 11.5 87000 94000 120000 52.0 3.8 5.0-15.0 MBT-DT16-10 16.0-17.5 33.8 12.2 116000 122000 163000 57.0 3.8 10.0-20.0 MBT-DT16-15 16.0-17.5 33.8 12.2 116000 122000 163000 62.0 3.8 15.0-25.0 MBT-DT16-20 16.0-17.5 33.8 12.2 116000 122000 163000 67.0 3.8 20.0-30.0 MBT-DT16-25 16.0-17.5 33.8 12.2 116000 122000 163000 72.0 3.8 25.0-35.0 MBT-DT16-30 16.0-17.5 33.8 12.2 116000 122000 163000 77.0 3.8 30.0-40.0 MBT-DT16-35 16.0-17.5 33.8 12.2 116000 122000 163000 82.0 3.8 35.0-45.0 MBT-DT16-40 16.0-17.5 33.8 12.2 116000 122000 163000 87.0 3.8 40.0-50.0 MBT-DT16-45 16.0-17.5 33.8 12.2 116000 122000 163000 92.0 9.5 45.0-55.0 MBT-DT16-50 16.0-17.5 33.8 12.2 116000 122000 163000 97.0 9.5 50.0-60.0 MBT-DT16-55 16.0-17.5 33.8 12.2 116000 122000 163000 102.0 9.5 55.0-65.0 MBT-DT16-60 16.0-17.5 33.8 12.2 116000 122000 163000 107.0 9.5 60.0-70.0 MBT-DT16-65 16.0-17.5 33.8 12.2 116000 122000 163000 112.0 9.5 65.0-75.0 MBT-DT16-70 16.0-17.5 33.8 12.2 116000 122000 163000 117.0 9.5 70.0-80.0 MBT-DT16-75 16.0-17.5 33.8 12.2 116000 122000 163000 122.0 9.5 75.0-85.0 MBT-DT16-80 16.0-17.5 33.8 12.2 116000 122000 163000 162.0 9.5 115.0-125.0 MBT-DT16-120 16.0-17.5 33.8 12.2 116000 122000 163000 BOBTAIL is registered trademark. Copyright Alcoa Inc. d=nominal Diameter; l 1 =Body Length (Max); l 2 =Length to Crimp; g=grip Range; d h =Hole Size (Min - Max); d k =Head Diameter (Max); k=head Thickness (Max); S=Nominal Shear Strength; T=Nominal Tensile Strength; b=bore Diameter; l=collar Length 38 emhart.eu

BOBTAIL d k k DESCRIPTION CLAMP d l 1 l 2 g d h d k k S T N N N 20.0 60.7 3.8 5.0-15.0 MBT-DT20-10 20.0-22.0 42.4 16.0 181000 191000 255000 65.7 3.8 10.0-20.0 MBT-DT20-15 20.0-22.0 42.4 16.0 181000 191000 255000 70.7 3.8 15.0-25.0 MBT-DT20-20 20.0-22.0 42.4 16.0 181000 191000 255000 75.7 3.8 20.0-30.0 MBT-DT20-25 20.0-22.0 42.4 16.0 181000 191000 255000 80.7 3.8 25.0-35.0 MBT-DT20-30 20.0-22.0 42.4 16.0 181000 191000 255000 85.7 3.8 30.0-40.0 MBT-DT20-35 20.0-22.0 42.4 16.0 181000 191000 255000 90.7 3.8 35.0-45.0 MBT-DT20-40 20.0-22.0 42.4 16.0 181000 191000 255000 95.7 3.8 40.0-50.0 MBT-DT20-45 20.0-22.0 42.4 16.0 181000 191000 255000 100.7 3.8 45.0-55.0 MBT-DT20-50 20.0-22.0 42.4 16.0 181000 191000 255000 105.7 3.8 50.0-60.0 MBT-DT20-55 20.0-22.0 42.4 16.0 181000 191000 255000 110.7 3.8 55.0-65.0 MBT-DT20-60 20.0-22.0 42.4 16.0 181000 191000 255000 115.7 9.5 60.0-70.0 MBT-DT20-65 20.0-22.0 42.4 16.0 181000 191000 255000 120.7 9.5 65.0-75.0 MBT-DT20-70 20.0-22.0 42.4 16.0 181000 191000 255000 125.7 9.5 70.0-80.0 MBT-DT20-75 20.0-22.0 42.4 16.0 181000 191000 255000 130.7 9.5 75.0-85.0 MBT-DT20-80 20.0-22.0 42.4 16.0 181000 191000 255000 Collar Standard Flange b l DESCRIPTION 12.3 17.7 MBTC-R12BL 14.4 21.5 MBTC-R14BL 1 23.7 MBTC-R16BL 20.5 29.6 MBTC-R20BL Note: The BOBTAIL parts shown are made from Grade 10.9 Steel. Other types of grades of steel, head types and surface finishes are available on request. Also there are other installation tools available depending on your application needs. Please contact us for advice. emhart.eu BOBTAIL is registered trademark. Copyright Alcoa Inc. 39

Power Tools LH-224 Pneudraulic Installation Tool Offering a number of outstanding features including increased stroke, the LH-224 has an ergonomically designed handle, plated piston rods and efficient in-line piston. Article Number: 04237 Specifications Compatible Fasteners Weight Length Height Tool stroke Air pressure Capacity Hydraulic Fluid 2.8 kg 260 322 21 6.2-6.9 bar 19 kn @ 6.2 bar Automatic Transmission Fluid DEXTRON II or equivalent Type Magna-Lok Auto-Bulb Magna-Bulb Diameter 7.9 9.5 Nose Assembly 99-3303 99-3305 99-3303 99-3305 99-3303 99-3305 Magna-Grip 99-1456 99-1458 C6L 99-3003 99-3006 2025LB Pneudraulic Installation Tool Designed for the high volume production environment, the 2025LB offers a number of outstanding features, including an ergonomically designed handle and high quality hydraulic components for smooth operation. Article Number: 09525 Specifications Compatible Fasteners Weight Length Height Tool stroke Air pressure Air consumption Capacity Hydraulic Fluid 2.63 kg 213 318 17 6.2-7.6 bar 1.4 CFM (39.64 I/min) based on 30 cycles per minute 23.53 kn @ 6.2 bar Automatic Transmission Fluid DEXTRON II or equivalent Type Magna-Lok Auto-Bulb Magna-Bulb Magna-Grip Diameter 9.5 Nose Assembly 99-3303, 99-3303L 99-3305, 99-3305L 99-3303, 99-3303L 99-3305, 99-3305L 99-3303, 99-3303L 99-3305, 99-3305L 99-1456, 99-1456L 99-1458, 99-1458L C6L Hucktainer 99-3003, 99-3003L 99-3006, 99-3006L 99-3464, 99-3464L 40 emhart.eu

Power Tools 255 Pneudraulic Powered Installation Tool This tool is designed for one-cycle installation for large diameter high strength fasteners. The 255 also features a pull piston for improved service life and ease of maintenance. Article Number: 09782 Specifications Compatible Fasteners Weight Length Height Tool stroke Air pressure Air consumption Capacity 4.0 kg 191 378 22.3 6.2-7.6 bar 20 CFM (561 I/min) based on 30 fastener installations/min 34.47 kn @ 6.2 bar Type Magna-Lok Magna-Bulb Bom Magna-Grip Diameter 7.9 9.5 Nose Assembly 99-3318 99-3307 99-1053 99-830-1 99-1439 99-1440 C6L /C120L 99-99-245 99-100-245 256 Pneudraulic Installation Tool This heavy duty tool is designed to accoodate larger diameter high strength fasteners and includes increased stroke. The pull piston improves service life and ease of maintenance. Article Number: 09655 Specifications Weight 5.0 kg Length 191 Height 378 Tool stroke 22.3 Air pressure 6.2-7.6 bar Air consumption 30 CFM (849 I/min) based on 18-20 fastener installations/minute Capacity 44.42 kn @ 6.2 bar Compatible Fasteners Diameter Type 7.9 9.5 Magna-Lok Magna-Bulb Bom FloorTight Magna-Grip C6L /C120L Nose Assembly 99-3318 99-3307 99-1053 99-830-1 99-3452 99-1439 99-1440 99-99-245 99-100-245 emhart.eu 41

Hydraulic Equipment HK432 Powerig Hydraulic Power Systems The compact HK432 Powerig is ideal for the high volume production environment. Suitable for use with most Huck installation tools the HK432 has many design features. These include:- Built in wheels - allows easy transfer between work stations Automatic Trigger activated stop/ start mechanism For more details on the range of hydraulic equipment, please contact your customer service team. Specifications Weight 68 kg (including hydraulic oil) Length 540 Height 550 Width 370 Power Supply Three Phase 50 Hz 3 x 230 +_10%, 3 x 400 VAC +_10%, 3 x 500 VAC +_10% Motor 2.2 kw Tool Outlets 1 Flow Rate 3.2 l/min. (nominal) Hydraulic Pull Pressure (Max) 550 bar (7977 psi) Hydraulic Return Pressure (Max) 400 bar (4351 psi) Powerig is registered trademark. Copyright Alcoa Inc. 42 emhart.eu

Hydraulic Powered Installation Tools 2620-PT Hydraulic Powered Installation Tool The 2620-PT is sized for the high-speed installation of larger fasteners. The tool features an in-line piston which extends seal life. The 2620-PT has only one moving part, which further minimises maintenance. Article Number: 06310 Specifications Compatible Fasteners Weight Length (without Nose Assembly) Height Tool stroke Operating Hydraulic Pressures Capacity 4.5 kg 167 179 36.5 Pull - 510 bar (7400 psi) Return - 221 bar (3200 psi) 34.47 kn @ 6.2 bar Type Bom C50L MHP/HuckFit Diameter 12.0 12.7 Nose Assembly* 99-5101 99-5002 99-5005 99-5406 2628-PT Hydraulic Powered Installation Tool The 2628 is sized for high-speed installation of larger fasteners. The tool features an in-line piston which extends seal life. The 2628 has only one moving part which further minimises maintenance. Article Number: 05026 Specifications Compatible Fasteners Weight Length (without Nose Assembly) Height Tool stroke Operating Hydraulic Pressures Capacity 8.6 kg 197 206 46 Pull - 510 bar (7400 psi) Return - 221 bar (3200 psi) 177.3 Kn @ 448 bar Type Bom C50L MHP/HuckFit Diameter 14.0 15.9 16.0 19.1 Nose Assembly* 99-5102 99-5103 99-5008, 99-5009 99-5010, 99-5013 99-5408 * Nose Assemblies are to be ordered seperately. emhart.eu 43

EUROPE United Kingdom STANLEY Engineered Fastening Avdel UK Ltd 2 Swiftfields Welwyn Garden City AL7 1LY United Kingdom Tel: +44 1707 292 123 Fax: +44 1707 292 198 sef.europe@sbdinc.com popuk@sbdinc.com The Netherlands STANLEY Engineered Fastening Emhart Teknologies B.V. Holtum Noordweg 35 6121 RE, Born The Netherlands Tel: +31 43 750 2024 Fax: +31 43 750 2030 popnl@sbdinc.com Spain STANLEY Engineered Fastening Stanley Black and Decker Iberica, SCA Carretera M-300, KM. 29,700 28802 Alcalá de Henares Madrid, Spain Tel: +34 91 887 1470 Fax: +34 91 882 3602 sft.pedidos@sbdinc.com popes@sbdinc.com STANLEY Engineered Fastening Avdel Spain S.A. Carretera M-300, KM. 29,700 28802 Alcalá de Henares Madrid, Spain Tel: +34 91 341 6767 Fax: +34 91 341 6740 ventas@infastech.com France STANLEY Engineered Fastening Emhart SNC Zone Ioparc Route de Chartres, Bât Loire 4 78190 Trappes France Tel: +33 1 30 50 91 00 Fax: +33 1 30 51 07 08 csdfr@bdk.com popfr@sbdinc.com STANLEY Engineered Fastening Avdel France S.A.S Bat. Le Monet Paris Nord 2 9 Allée des Impressionnistes CS 59328 Villepinte 95941 Roissy CDG Cedex France Tel: +33 1 49 90 95 00 Fax: +33 1 49 90 95 50 avdelfrance@infastech.com Germany STANLEY Engineered Fastening Tucker Fasteners GmbH Max-Eyth-Strasse 1 D-35394 Giessen Germany Tel: +49 641 405 0 Fax: +49 641 405 366 popde@sbdinc.com Italy STANLEY Engineered Fastening Avdel Italia srl Viale Lombardia 51/53 20861 Brugherio (MB) Italy Tel: +39 039 289 911 Fax: +39 039 287 3079 vendite@infastech.com Denmark STANLEY Engineered Fastening Emhart Harttung A/S Roskildevej 22 DK-2620 Albertslund Denmark Tel: +45 44 84 11 00 Fax: +45 44 84 62 12 salg.danmark@sbdinc.com popdk@sbdinc.com Sweden & Norway STANLEY Engineered Fastening Skjutbanevägen 6 S-703 69 Örebro Sweden Tel: +46 19 20 58 00 Fax: +46 19 26 00 38 info@emhart-teknik.se popse@sbdinc.com Norway Tel: +47 22 90 99 90 Fax: +46 19 26 00 38 popno@sbdinc.com Finland STANLEY Engineered Fastening Kumpulantie 13B PL47 FI-00521 Helsinki Finland Tel: +35 8 981 900 60 Fax: +35 8 981 24 28 myynti.emhart@bdk.com popfi@sbdinc.com Czech Republic STANLEY Engineered Fastening Tucker s.r.o. Czech Republic Tel: +420 725 800 464 Fax: +420 493 546 567 popcz@sbdinc.com Poland STANLEY Engineered Fastening Masterfix Poland Ltd Sp. Z.o.o. ul. Daleka 16 60-124 Poznaň Poland Tel: +48 61 86 66 297 Fax: +48 61 86 65 733 poppl@sbdinc.com AMERICAS ASIA USA - Connecticut STANLEY Engineered Fastening 4 Corporate Drive, Suite 395 Shelton, CT 06484 USA Tel: +1 203 925 2260 Fax: +1 203 925 2279 Canada STANLEY Engineered Fastening 9870 Boulevard Du Golf Anjou, Quebec Canada HIJ 2Y7 Tel: +1 514 351 0330 Fax: +1 514 351 0458 Mexico STANLEY Engineered Fastening Av. Antonio Dovali Jaime No 70 Torre B, Piso 9 La Fe, Santa Fe Mexico, D.F. 01210 Tel: +52 55 5326 7100 Fax: +52 55 5236 7141 Brazil STANLEY Engineered Fastening Emhart Refal Rua Ricardo Cavatton, 226 CEP: 05038-110 São Paulo Brazil Tel: +52 55 11 3871 6460 Fax: +52 55 11 3611 3505 Argentina STANLEY Engineered Fastening Emhart Refal Marcos Sastre 1998 1618 El Talar De Pacheco Buenos Aires B1610CRJ Argentina Tel: +54 11 4726 4400 Fax: +55 44 4727 7070 China STANLEY Engineered Fastening Shanghai Emhart Fastening Systems Ltd. Room 1903-1908 Shanghai Mart Tower, No.2299 Yan An Road (W) Shanghai, 200336 China Tel: +86 21 6236 7600 Fax: +86 21 5211 0060 Japan STANLEY Engineered Fastening Shuwa Kioicho Park Building 302 3-6 Kioicho, Chiyoa-Ku Tokyo, 1020094 Japan Tel: +81 3 3265 7291 Fax: +81 3 3265 7298 Korea STANLEY Engineered Fastening Infastech (Korea) Ltd. 32-9, Jik-dong, Gwangju-si Gyeonggi-do South Korea, 464-090 Tel: +82 31 798 6340 Fax: +82 31 798 6342 India STANLEY Engineered Fastening Emhart Teknologies (India) Private Ltd. APEX Towers, 6th Floor No. 54, 2nd Main Road, R.A. Puram Chennai 600028 India Tel: +91 44 4343 7100 Fax: +91 44 4306 0768 Stanley Engineered Fastening 2014 The latest version of this catalogue is available to view and download at www.emhart.eu POP, POPSet, ProSet, Point&Set, POPNut and Tucker are registered trademarks of Stanley Engineered Fastening. SmartSet and POP Bolt are trademarks of Stanley Engineered Fastening. Quality systems approvals from the world s household names in manufacturing serve to reinforce accreditation to ISO14001 / ISO9001 / TS16949. As a result of our continuous design improvement, Stanley Engineered Fastening products are subject to modification. The latest technical data and drawings are available for any specific products on request. 6815/GB/0114