IBM Document Manager Version 8.5 Fix Pack 5 (Build 250) Readme

IBM Document Manager Version 8.5 Fix Pack 5 (Build 250) Readme System requirements About IBM Document Manager client/server version compatibility Important: You must upgrade clients and servers to the same Document Manager version. Different versions of Document Manager are not compatible, therefore, you cannot connect a Document Manager client with a server that has a different Document Manager version installed. Server hardware The following hardware is required for each IBM Document Manager server. Processor: 1 GHz or faster per processor RAM: 1 GB recommended; 512 MB minimum Free disk space: 250 MB Server operating systems The IBM Document Manager server requires one of the following operating systems. Operating system Windows Server 2012 R2 Windows Server 2012 Windows Server 2008 R2 Service Pack 1 (64-bit) Windows Server 2008 R2 (64-bit) Windows Server 2008 (32-bit) Edit the system-wide COM limits as described in: Remote clients fail to connect to a DB2 Document Manager server on a Microsoft Windows Server 2003 (SP1) or Server 2008 system Edit the system-wide COM limits as described in: Remote clients fail to connect to a DB2 Document Manager server on a Microsoft Windows Server 2003 (SP1) or Server 2008 system Edit the system-wide COM limits as described in: Remote clients fail to connect to a DB2 Document Manager server on a Microsoft Windows

Operating system Server 2003 (SP1) or Server 2008 system Renditioning software IBM Document Manager Rendition Services requires software from independent software vendors to create renditions. This software must be installed on the server that is running Rendition Services. The renditioning software that is used depends on the type of renditions that the service generates. To render PDF files, use Adobe Acrobat Distiller and the application that was used to create the original file. To render TIF files and thumbnails, use Oracle Systems AutoVue client (not the Client- Server Editions or AutoVue for Java (jvue)). Content repositories IBM Document Manager requires one of the following content repositories. All versions of both IBM Content Manager Enterprise Edition and IBM Content Manager for z/os are supported. Content repository IBM Information Integrator for Content Version 8.5, 8.5 Fix Pack 1 All the IBM Content Manager Versions that are compatible with IBM Information Integrator for Content Version 8.5 are supported. Refer to the compatibility matrix of IBM Information Integrator for Content Version 8.5 and IBM Content Manager versions. http://www.ibm.com/support/docview.wss?uid=swg27039587 Important: Some new features in IBM Content Manager 8.5 are not supported via connection of IBM Information Integrator for Content Version 8.5. Refer to technote Technote about IBM Document Manager supporting IBM Content Manager 8.5 for more details. IBM Information Integrator for Content Version 8.4.3, 8.4.3 Fix Pack 1, Fix Pack 2, Fix Pack 3, and Fix Pack 4 All the IBM Content Manager versions that are compatible with IBM Information Integrator for Content Version 8.4.3 are supported. Refer to the compatibility matrix of IBM Information Integrator for Content Version 8.4.3 and IBM Content Manager. http://www.ibm.com/support/docview.wss?uid=swg27019421 http://www.ibm.com/support/docview.wss?rs=86&uid=swg27012586 FileNet Panagon Content Services Version 5.5 with IDM Desktop Version 4.0.2 and either Microsoft SQL Server or Oracle See the IBM Document Manager infocenter for important information before you integrate this solution. Important: FileNet IDM Desktop Version 4.0.2 and 4.0.2 Fix Pack 12 are supported. Install Panagon IDM Desktop on

Content repository the IBM Document Manager server and on any system where an IBM Document Manager service is running. Web servers You can use any web server to deploy IBM Document Manager Desktop. For example: Apache HTTP server Domino server IBM HTTP server Microsoft Internet Information Services (IIS) Protocols The following protocols are supported for communication between IBM Document Manager clients and the IBM Document Manager server. Protocol Microsoft.NET Framework 3.5, 4.0, 4.5 Microsoft DCOM Article #1193861 Article #1272246 Client hardware Processor: 233 MHz RAM: 256 MB Free disk space: 250 MB Client operating systems IBM Document Manager clients require one of the following operating systems. Recommendation: Install IBM Document Manager clients (Designer and Desktop) on client systems (Windows8.1, Windows 8.0, Windows 7). Having IBM Document Manager clients installed on the IBM Document Manager server system can be useful while you design the Desktop and test various configuration options, but client systems provide better processor utilization for client applications than server systems. Operating system

Operating system Windows Server 2012 R2 Windows Server 2012 Windows 8.1 (32-bit and 64-bit versions) Windows 8 (32-bit and 64-bit versions) Windows 7 SP1(32-bit and 64-bit versions) The IBM Document Manager client supports only the 32-bit versions of Internet Explorer. The IBM Document Manager client supports only the 32-bit versions of Internet Explorer. The IBM Document Manager client supports only the 32-bit version of Internet Explorer. If you are running the 64-bit version of Windows 8.1, you must use the 32-bit version of Internet Explorer. The IBM Document Manager client supports only the 32-bit version of Internet Explorer. If you are running the 64-bit version of Windows 8, you must use the 32-bit version of Internet Explorer. For information on installing IBM Document Manager on an FDCC (USGBC) - compliant Windows 7 workstation, see Article #1297725. The IBM Document Manager client supports only the 32-bit version of Internet Explorer. If you are running the 64-bit version of Windows 7, you must use the 32-bit version of Internet Explorer. Windows Server 2008 R2 SP1(64-bit) Remember: If you are running Windows Server 2008 R2, you must use the 32-bit version of Internet Explorer. IBM Knowledge Center topic Web browsers IBM Document Manager clients support the following web browsers. Web browser Microsoft Internet Explorer 11 (32-bit only) Microsoft Internet Explorer 10 (32-bit only) Microsoft Internet Explorer 9 (32-bit only) On all supported Microsoft Windows systems On all supported Microsoft Windows systems On all supported Microsoft Windows systems Integrated applications You can integrate the following applications with IBM Document Manager. Important: Ensure that the client operating system that you use is supported by the applications that you want to integrate with IBM Document Manager. See the documentation that comes with each application to verify the operating system requirements. Application Adobe Acrobat (Distiller) Versions 11,10,9 PDF rendition only; no IBM Document Manager client integration Autodesk AutoCAD Versions 2015 32bit, 2014

Application 32bit, 2013 32bit, 2012 32bit Bentley MicroStation Versions V8i Oracle AutoVue Versions 20.0.4,20.0.2 Rendition Autocad2013 and Autocad2014 format dwg file needs AutoVue 20.0.4. AutoVue client-server Editions and AutoVue for Java (jvue) are not supported. IBM Lotus Versions 9.0, 8.5.3 Microsoft Office Professional Plus 2013 SP1 32bit, Office 2010 SP2 32bit, 2007 SP3 Microsoft Excel Microsoft Outlook Microsoft PowerPoint Microsoft Word Parametric Technology Corporation (PTC) Arbortext Editor Article #1279033 Microsoft Office testing environments IBM tested the following Microsoft Office application versions with IBM Document Manager Version 8.5 FP5 Microsoft Office version Microsoft Office Professional Plus 2013 SP1 Microsoft Excel, Outlook, PowerPoint, and Word 2013 SP1 32bit: (15.0.4569.1506) MSO (15.0.4569.1506) Microsoft Office 2010 Service Pack 2 Microsoft Excel, Outlook, PowerPoint, and Word 2010: (14.0.6024.1000) MSO (14.0.6023.1000) Microsoft Office 2007 Service Pack 3 Microsoft Excel 2007 (12.0.6024.5000) MSO (12.0.6020.5000) Microsoft Outlook 2007 (12.0.6023.5000) MSO (12.0.6020.5000) Microsoft PowerPoint 2007 (12.0.4518.1014) MSO (12.0.6020.5000) Microsoft Word 2007 (12.0.6015.5000) MSO (12.0.6020.5000) Virtualization software

IBM Document Manager Version 8.5 supports the following applications for virtualization. Virtualization software VMWare ESX 4.0 Citrix XenApp Versions 7.5, 6.5 Feature Pack2, Installation information for IBM Document Manager Version 8.5 Fix Pack 5 Read this section before you install or upgrade IBM Document Manager. Upgrading to IBM Document Manager 8.5 Fix Pack 5 IBM Document Manager 8.5 Fix Pack 5 requires that a publicly available version of one of the following releases, or a custom test fix for one of these releases, is installed before you upgrade to Version 8.5 Fix Pack 5: IBM Document Manager Version 8.5 IBM DB2 Document Manager Version 8.4.2 or any of its fix packs Important: You must upgrade clients and servers to the same IBM Document Manager version. Different versions of IBM Document Manager are not compatible. Therefore, you cannot connect an IBM Document Manager client to a server that has a different IBM Document Manager version installed. Installation information The information in this section applies to IBM Document Manager Version 8.5 Fix Pack 5, and supersedes any information in the Installing or upgrading IBM Document Manager topic in the IBM Content Management Knowledge Center. Important: You cannot change the existing IBM Document Manager installation directory when you install IBM Document Manager Version 8.5 Fix Pack 5. You must use the existing installation directory. New application versions supported with IBM Document Manager Version 8.5 Fix Pack 5 With the release of new fix packs, the IBM Document Manager Desktop often integrates with newer versions of some applications. Application integration With the release of IBM Document Manager Version 8.5 Fix Pack 5, IBM Document Manager Desktop integrates with the following new application versions: Content Manager v8.5 FP1 Content Manager v8.4.3 FP4 Mircrosoft Office 2013 SP1 32Bit AutoCAD 2015 32bit Citrix XenApp 7.5

Known problems 1. IBM Information Integrator for Content hot-fix IO21767 is needed for modifying security of IBM Record Manager declared documents In APAR15153, IBM Document Manager supports modifying the security of an IBM Record Manager declared document. To modify security for an IBM Record Manager declared document, you must apply for IBM Information Integrator for Content hot-fix IO21767. Without the hot-fix IO21767, IBM Document Manager desktop fails to set security for a declared document. The IO21767 hot-fix was created for IBM Information Integrator Version 8.4.3 Fix Pack 3, IBM Information Integrator Version 8.4.3 Fix Pack 4, and IBM Information Integrator Version 8.5 Fix Pack 1. 2. IBM Document Manager desktop fails to retrieve group for the login user With Oracle database and IBM Content Manager Version 8.5 and 8.5 Fix Pack 1 as the back end server, IBM Document Manager desktop fails to retrieve the group for the login user. As a result, IBM Document Manager users can t get the correct desktop template. To solve the problem, you need to deploy hot-fix IO21088 that was created for IBM Content Manager Version 8.5 Fix Pack 1. APARs list APAR IO20457 IO20622 IO20713 IO20935 IO21071 IO21463 Brief problem description With multiple sessions in IBM Document Manager, when you changed the group for the first session, the new selected group appeared in the last session. With Hang Resistance feature in Windows Internet Explorer version 9.0 and above, IBM Document Manager power search dialog did not respond if loading properties or CVL list from server took longer than 3 seconds. With the fix of this APAR, normal behavior is restored Class property in the plugins ini file did not change when changing the IBM Document Manager class in Add From Library Template dialog. MClientAPI.LoadSearchResults() set the return value of the IBM Document Manager Client to one if the DMSearchResults object passed to it that was obtained from the DMClientAPI.GetResults method. There was a memory leak when you declared a document in lifecycle service. This APAR solve the memory leak problem for lifecycle service. Full folder structure was not shown when user added document into folder of IBM Document Manager client through Excel 2013.

IO21468 IO21846 IO22157 Users with low privileges could change the security on items of record. IBM Information Integrator for Content hot-fix IO21767 is the prerequisite of this APAR. With both IO21468 and IO21767 fixes, normal behavior is restored. With multiple sessions of IBM Document Manager automation service, a second session made many attempts to lock a request that already being processed. In the case IBM Document Manager automation service ran with multiple sessions, and there was only 1 request left in the requests queue, other sessions made many attempts to lock the request that already being locked by one session. The fix helps IBM Document Manager automation service decrease lock errors. Ddmextr.exe crashed when checking in Microstation file (.dgn). When checking-in IBM Document Manager Version 8.5 Fix Pack 4, DdmExtr.exe crashed when extracting the compound documents for a Microstation *.DGN file. IBM Document Manager desktop failed to add a Microstation file to Document Manager.

Copyright and trademark information IBM, the IBM logo, and ibm.com are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at http://www.ibm.com/legal/copytrade.shtml Notices INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. Other company, product, or service names may be trademarks or service marks of others. THIRD-PARTY LICENSE TERMS AND CONDITIONS, NOTICES AND INFORMATION The license agreement for this product refers you to this file for details concerning terms and conditions applicable to third party software code included in this product, and for certain notices and other information IBM must provide to you under its license to certain software code. The relevant terms and conditions, notices and other information are provided or referenced below. Please note that any non-english version of the licenses below is unofficial and is provided to you for your convenience only. The English version of the licenses below, provided as part of the English version of this file, is the official version. Notwithstanding the terms and conditions of any other agreement you may have with IBM or any of its related or affiliated entities (collectively "IBM"), the third party software code identified below are "Excluded Components" and are subject to the following terms and conditions: the Excluded Components are provided on an "AS IS" basis IBM DISCLAIMS ANY AND ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS WITH RESPECT TO THE EXCLUDED COMPONENTS, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF NON-INFRINGEMENT OR INTERFERENCE AND THE IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IBM will not be liable to you or indemnify you for any claims related to the Excluded Components IBM will not be liable for any direct, indirect, incidental, special, exemplary, punitive or consequential damages with respect to the Excluded Components.