SINGLE TURN COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 4 5 8 6 FEATURES Lead-free soldering, Cadmium-free Resistance tolerance ± 0 % O ring sealed and washable Suitable for automatic insertion and automatic adjustment Increase in the level of characteristics in the highfrequency field (In house comparison) 4 5 6 8 Part name Housing Rotor Wiper O ring Resistive element Terminal pin Adhesive Base element Electrode Material Nickel silver Silicone rubber RuO cermet Copper, Solder-plated Copper, Tin-plated Epoxy Ceramic Ag-Pd cermet Flammability PBT UL-4V-0 Polybutyleneterephthalate CFCs (PBBOs, PBBs) CFCs, Halon, Carbon tetrachloride and designated bromic flame retardant PBBOs and PBBs are not used in our products. UL-4HB UL-4V-0 PART NUMBER DESIGNATION F T - 6 T V 5 k Ω ( 5 0 ) Series name Resistance code Terminal pin Blank Sn-Pb E Sn (Lead-free) Form of packaging T Taping (Ammo pack type) BlankBulk in plastic bag Resistance value Product shape P Top adjustment S Side adjustment V Top adjustment X Side adjustment H Side adjustment N Side adjustment Please refer to the LIST OF PART NUMBERS when placing orders.
FT-6 LIST OF PART NUMBERS position Top adjustment Side adjustment Form of packaging Taping (Ammo pack type) Sn-Pb Not manufactured Sn (Lead-free) Sn-Pb Plastic bag Sn (Lead-free) FT-6TP FT-6ETP FT-6P FT-6EP FT-6TV FT-6ETV FT-6V FT-6EV FT-6TS FT-6ETS FT-6S FT-6ES FT-6X FT-6EX FT-6TH FT-6ETH FT-6H FT-6EH FT-6N FT-6EN Nominal resistance values Fig. A 0 Ω A 0 Ω 50 Ω 00 Ω 00 Ω 00 Ω 500 Ω kω kω kω 5 kω 0 kω 0 kω 0 kω 50 kω 00 kω 00 kω 00 kω 500 kω MΩ MΩ Fig. The above part numbers are all available with the respective combination of <Nominal resistance values> (Fig. ). Verify the above part numbers when placing orders. Taping specification is not sold separately and must be purchased in taping unit. A The products indicated by A mark are manufactured upon receipt of order basis. ELECTRICAL CHARACTERISTICS Nominal resistance range Resistance tolerance Power ratings Resistance law Maximum input voltage Maximum wiper current Effective electrical angle End resistance C.R.V. Operating temp. range Temp. coefficient Insulation resistance Dielectric strength Net weight 0 Ω ~ MΩ ± 0 % 0.5 W (0 C) 0 W (5 C) Linear law DC00 V or power rating, whichever is smaller Power ratings 0 ( turn) Ω % or Ω, whichever is greater Ω % or Ω, whichever is greater 55 ~ 5 C 0 Ω ~ 0 Ω : ± 50 0-6 / C maximum 50 Ω ~ MΩ : ± 00 0-6 / C maximum 000 MΩ minimum (DC500 V) AC00 V, 60 s Approx. 0.5 g (FT-6P, V, EP, EV) Approx. 0.66 g (FT-6S, H, X, N, ES, EH, EX, EN) MECHANICAL CHARACTERISTICS Mechanical angle Operating torque Stop strength Rotational life Terminal strength Thrust to rotor Solderability 60 ( turn) 0 mn m {04 gf cm} maximum 50 mn m {50 gf cm} minimum 00 cycles [ R/R ± ( Ω+ %)] 0 N {.0 kgf} minimum Tensile strength 0 N {.0 kgf} minimum Sn-Pb : 5 C, s Sn (Lead-free) : 45 ± C, ~ s { }Reference only
FT-6 ENVIRONMENTAL CHARACTERISTICS Test item Thermal shock Humidity Shock Vibration Load life Low temp. operation High temp. exposure Immersion seal Soldering heat Test conditions 65 ~ 5 C (0.5 h), 5 cycles 0 ~ 65 C ( 80 ~ 8 %), 0 cycles, 40 h 8 m/s, 6 ms 6 directions for times each (Amplitude).5 mm or (Acceleration) 6 m/s, 0 ~ 000 Hz, directions, times each 0 C, 0.5 W 000 h 55 C, h 5 C, 50 h 85 C, 60 s 50 C, s Flow soldering 60 ± C, 5 ~ 6 s, two times maximum Manual soldering 80 ± 0 C, ~ 4 s Specifications [ R/R %] [S.S. %] [ R/R %] [ R/R %] [S.S. %] [ R/R %] [S.S. %] [ R/R %] [S.S. %] [ R/R %] [S.S. %] No leaks (No continuous bubbles) [ R/R %] R/RChange in total resistance S.S. Setting stability MAXIMUM INPUT RATINGS Nominal resistance values (Ω) Resistance code Maximum input voltage (V) Maximum wiper current (ma) A 0 00.4 A 0 00.6 58 50 500 5.00 00 00 0.0 0. 00 0 0.0 50.0 00 0. 40.8 500 50 5.8.6 k 0.4.4 k 0.6 5.8 k 0 8.. 5 k 50 50.0 0.0 0 k 0 0..0 0 k 0 00 5.00 0 k 0 4.08 50 k 50 58.6 00 k 04 00.00 00 k 04 00.00 00 k 04 00 0.66 500 k 504 00 0.40 M 05 00 0.0 M 05 00 0.0 A The products indicated by A mark are manufactured upon receipt of order basis.
FT-6 OUTLINE DIMENSIONS FT-6P, FT-6EP Top adjustment 60 Nom. 0.W L.6D φ 0.45 Unless otherwise specified, tolerance: ± 0. (Unit: mm) CW rotation 5.8 ± FT-6S, FT-6ES Side adjustment 0 60 Nom. 0.W L.6D 0..5 8..5± φ 0.45 FT-6X, FT-6EX Side adjustment 0.W L.6D 0 0. Lead-free Identification mark 60 Nom. 8. 0±.5 φ 0.45
FT-6 OUTLINE DIMENSIONS FT-6V, FT-6EV Top adjustment 60 Nom. 0.W L.6D φ 0.45 Unless otherwise specified, tolerance: ± 0. (Unit: mm) CW rotation FT-6H, FT-6EH Side adjustment 5.8.5 ± 6 ± Lead-free Identification mark 0 60 Nom. 0.W L.6D 0..5 ± FT-6N, FT-6EN Side adjustment Lead-free Identification mark 0.W L.6D 0 0. 60 Nom..5.5 ± 8. φ 0.45.5 ± 8. φ 0.45
FT-6 OUTLINE DIMENSIONS Unless otherwise specified, tolerance: ± 0. (Unit: mm) CW rotation FT-6TV, FT-6ETV Top adjustment FT-6TP, FT-6ETP Top adjustment 60 Nom. 0.W L.6D 60 Nom. 0.W L.6D.± Δ max. Δ max..± Δ max. Δ max. 8±0.5 +0. 4.8± ±0.5 min. 8±0.5 4.8± ±0.5 6± min. +0. 5.8 5.8 ±0.5 0. 0. 6.5±0.5 φ 4±0. 6.5±0.5 φ 4±0..±0. 0.45±0.0.±0. 0.45±0.0 FT-6TH, FT-6ETH Side adjustment FT-6TS, FT-6ETS Side adjustment 60 Nom..± 0 0.W L.6D Δ max. 8. 0. Δ max..± 60 Nom. 0 0.W L.6D Δ max. 8. 0. Δ max. ±0.5.± ±0.5 min. +0. 8±0.5.5.± ±0.5 6± min. +0. 8±0.5.5 0. 6.5±0.5.±0. 0.45±0.0 φ 4±0. 0. 6.5±0.5 φ 4±0..±0. 0.45±0.0
FT-6 PACKAGING SPECIFICATIONS <Taping packaging specifications> Taping version is packaged in 000 pcs. per reel. Orders will be accepted for units of 000 pcs., i.e., 000, 000, 000 pcs., etc. Tape & reel version contains 000 pcs. in one box. <Bulk pack specifications> Unit of bulk pack in a plastic bag is 00 pcs. per pack. Boxing of bulk in a plastic bag is performed with 000 pcs. per box. # terminal Direction of feed 45 0 0 Direction of feed Ammo pack type # terminal Ammo Pack Package size: 0 mm 0 mm 45 mm The leader and end of the tape have an empty part of minimum 00 mm respectively. There are two tape outlets on the package for different terminal alignment directions, for which details refer to the sketch above. (e.g.) When the tape is fed from the right outlet marked, # terminal comes out first. Gross weight of the boxing version TV, ETV : Approx. 850 g TH, ETH : Approx. 40 g TP, ETP : Approx. 80 g TS, ETS : Approx. 40 g