Home > Equipment > Tub Grinders > TG5000 TG5000 Specs General Dimensions and Weights - Non Loader Maximum Length - Transport 39.2' 12 m Maximum Length - Conveyor Unfolded 61.1' 18.6 m Maximum Width (Transport) 8.4' 2.6 m Maximum Height (Transport) 157" 398.8 cm Weight - Tandem Axle 51000 lbs 23133.2 kg Weight - Triple Axle 53000 lbs 24040.4 kg Tongue Weight - Tandem Axle 16500 lbs 7484.3 kg Tongue Weight - Triple Axle 16000 lbs 7257.5 kg Axle Weight - Tandem Axle 34500 lbs 15648.9 kg Axle Weight - Triple Axle 37000 lbs 16782.9 kg Sound Power Sound Power LwA=116.6 db(a) At the lower control panel = 96.4 db(a) General Dimensions and Weights - Loader Maximum Length - Transport 45.5' 13.9 m Maximum Length - Conveyor Unfolded 67.5' 20.6 m Maximum Reach of Loader 27' 8.2 m Maximum Width (Transport) 8.4' 2.6 m Maximum Height (Transport) 162" 411.5 cm Maximum Height - Cab in Operating Position 18.8' 5.7 m
Weight - Engine Option One 68000 lbs 30844.3 kg Tongue Weight - Engine Option One 24000 lbs 10886.2 kg Axle Weight 44000 lbs 19958.1 kg Sound Power Sound Power LwA=116.6 db(a) At the lower control panel = 96.4 db(a) In the loader cab = 76.8 db(a) Engine Option One Make and Model CAT C15 T4F (Stage IV) Turbo Charged After Cooled Number of Cylinders 6 Gross Horsepower (Maximum) 540 hp 402.7 kw Torque (Max) 1823.3 ft-lb 2472.1 Nm Fuel Tank Capacity 251 gal 950.1 L Max Fuel Consumption 28 gph 106 lph Fuel Type Air Cleaner Oil Filter Recommended Oil Ultra Low Sulfur Diesel Primary & Secondary Backup Filter with precleaner and electric restriction indicator Spin-on CAT DEO-ULS OR API CJ-4, OR ACEA E9. CAT LABEL 350-0684 IS RECOMMENDED Oil Volume with Filter 40.2 qt 38 L Cooling Medium Coolant Capacity (Engine and Radiator) Air to Boil Temperature Alternator Fan Clutch Type Liquid 20 gal 75.7 L 125 deg 24 Volt, 190 Amp 42" Dia, Variable Pitch, Reversible PT Tech
Clutch Engagement Push Button Engine Option Two Make and Model CAT C15 Tier 3 Turbo Charged After Cooled Number of Cylinders 6 Gross Horsepower (Maximum) 540 hp 402.7 kw Torque (Max) 1819 ft-lb 2466.2 Nm Fuel Tank Capacity 195 gal 738.2 L Max Fuel Consumption 27 gph 102.2 lph Fuel Type Air Cleaner Oil Filter Recommended Oil Diesel Primary & Secondary Backup Filter with precleaner and electric restriction indicator Spin-on API CC/CD Oil Volume with Filter 42 qt 39.7 L Cooling Medium Coolant Capacity (Engine and Radiator) Alternator Fan Clutch Type Clutch Engagement Liquid 24 gal 90.8 L 24 Volt, 200 Amp 42" Dia, Fixed Pitch, Reversible PT Tech Push Button Feed System Tub Table Thickness.4" 1 cm Tub Table Type Table Tilt Degrees T1 Steel 91 deg Millbox Opening 30.6" x 46.6"
Inside Diameter of Tub 7.8' 2.4 m Inside Flare Diameter - At Base of Tub Inside Flare Diameter - At Tub Opening 8.3' 12.3' 2.5 m 3.7 m Depth of Tub 5.1' 1.5 m Wall Thickness.3".6 cm Wall Type T1 Steel Loading Height 10.7' 3.3 m Drive Type Drive Chain Drive Tensioner Drive Motor Tub Roller Quantity Tub Speed Continuous sprocket 120H roller chain Automatic hydraulically tensioned mechanical slide Open loop 8 carrier, 8 guide 10 rpm Tub Agitators 4 Safety System Thrown Object Restraint System Tub Cover Description Tub Cover Positions Rotor Deflector Falling Object Protection at Control Station Pivoting tub cover assembly Hydraulically activated Transport and Operate with Hydraulic Lock. Transport also has mechanical lock Standard Overhead and side protection Millbox Opening 23" x 49" Duplex Drum Drum Diameter 22.5" 57.2 cm
Tip Diameter 29" 73.7 cm Drum Cutting Width 44" 111.8 cm Drum Skin Thickness 1.5" 3.8 cm Drum Speed Tip Speed Bearing Type 2050 rpm 15612 rpm Spherical roller Bearing - Inner Race Diameter 4.3" 11 cm Bearing - Dynamic Capacity 136000 lbs 61688.6 kg Number of Hammers 7 Number of Cutters 14 Cutter Block Types Center Retention Pin Dimensions Block style single bolt wide 3"x3.5" wide; 2 bolt 2"x3" narrow 2" Number of Wipers 4 Screen Dimensions 47" x 29" x 3/4" Screens Screen Type AR 400, Reversible, Qty 2 Breaker Bar Type Replaceable T1 Steel Bar Breaker Bar Dimensions 2.5" x 3" Number of Sides 4 Usable Edges Screen Area 2700 sq in 17419.3 sq cm Drive Shaft Custom 1810 Driveline - Engine Option One U - Joints Greased (qty 2) Discharge System - Single Belt Design
Width 36" 91.4 cm Belt Design Splice Return Roller Quantity Standard: 3-ply 330 V- Cleated Heavy Duty: Straight Warp Single Ply 330# both with V-cleat Standard: Armored Stainless Steel Cable Heavy Duty: Super Screw 5 Standard and 1 Vibrating Roller Idler Roller Diameter 8" 20.3 cm Standard Drive Roller Diameter Magnetic Drive Roller Diameter Drive Motor 12.8" 32.4 cm 12.8" 32.4 cm Eaton Belt Speed 778 ft/min 237.1 m/min Load Height 14' 4.3 m Hydraulic System Tank capacity 90 gal 340.7 L Recommended Oil HY POWER 68 Filtration Method In Tank Return Filters (qty 2) with suction strainer Number of Coolers 1 Implement Hydraulics Components System Type Pump Type Pump Flow at Maximum RPM Conveyor Open Loop Gear 20.7 gpm 78.4 L/min System relief pressure 3000 psi 206.8 bar Tub Drive Hydraulics
System Type Pump Type Pump Flow at Maximum RPM Load Sense, Pressure Compensated Axial Piston, Variable Displacement 22.1 gpm 83.7 L/min System relief pressure 3045 psi 209.9 bar Motor Series Eaton VIS45 Clutch Hydraulics Tank capacity 21 gal 79.5 L Recommended Oil Filtration Method VMF Gold Spin on High Pressure Number of Coolers 1 System Type Pump Type Pump Flow at Maximum RPM Open Loop Gear 10.6 gpm 40.1 L/min System relief pressure 260 psi 17.9 bar System Type Pump Type Pump Flow at Maximum RPM Loader Hydraulics Load Sense, Pressure Compensated Axial Piston, Varible Displacement 54.2 gpm 205.2 L/min System relief pressure 3335 psi 229.9 bar Electrical System System Voltage 24 Volt Battery Group 8-D, 1155 CCA (Qty 2) System Protection Fused Control Station
Display Type Engine Information Machine Information Operational Faults Gauges Switches LCD Multi-Function Operational, Diagnostic and System Parameters Operational, Diagnostic and System Parameters SAE J1939 Diagnostic Codes Fuel Level, Tub Pressure, Conveyor Pressure, Auxillary Hydraulic Pressure, Moisture Proof, Toggle Style Radio Remote Control Display Type Engine Information Machine Information Operational Faults Switches Operating Range Battery Type Channel Setting LCD Multi-Function Sealed Membrane 300 feet (qty 6) AA Alkaline 50 channels Loader Cab Display Type Engine Information Machine Information Operational Faults Gauges Switches DP10 Loader Hydraulic Pressure Moisture Proof, Toggle Style Chassis Frame Description Continuous I-beam Hitch Type Replaceable king pin 2"
Fender Description Brake Type Trailer Light Type Bolt On, 3/16" Formed Steel Air Actuated w/ Spring Applied Park Brake 12/24 Volt LED Axle/Suspension Axle Type Tandom Axle Over-Slung Spring Suspension (Non- Loader) Capacity 20000 lbs 9071.8 kg Tires - Option One 445/50R22.5 Aluminum Hub Piloted Super Singles Wheels - Option One 22.5 Ground Clearance - Option One 11" 27.9 cm Axle/Suspension - Option Two Axle Type Triple Axle Over-Slung Spring Suspension (Non-loader and loader) Capacity 20000 lbs 9071.8 kg Tires - Option One 445/50R22.5 Steel Hub Piloted Super Singles Wheels - Option One 22.5 Ground Clearance - Option One 11" 27.9 cm Loader Loader Reach 27' 8.2 m Pedestal/Cab Rotation Loader Lift Capacity at Full Reach Loader Lift Capacity at 10 ' (3.05 m) Grapple Type 370 deg 3500 lbs 1587.6 kg 12250 lbs 5556.5 kg Multiple Tine, Continuous 360 Degree Rotation
Grapple Rotation 360 deg Grapple Weight 1315 lbs 596.5 kg Loader Controls Climate Controls Radio Window Type Front Intrusion Guard Pilot Operated A/C & Heat AM/FM/WB/AUX/ SIRIUS SATELLITE RADIO READY with two 4" speakers 3/8" Polycarbonate 5/8" diameter rods welded wire mesh Optional Air Compressor Air Compressor Brand Engine Mi-T-M 13 hp Honda Maximum Pressure 175 psi 12.1 bar Maximum Air Flow 29 cfm.8 cmm Tank capacity 30 gal 113.6 L Other Options - Tub Grinder Screens Special Tools Group Special Paint Extended Warranty Preventative Maintenance Optional Optional Optional Optional Optional Copyright 2010-2016. Vermeer Corporation. All Rights Reserved. www.vermeer.com