FRL/AirCare Air Controls & Accessories



Similar documents
Filter/Regulators Compressed air, general purpose, and Instrument Filter/Regulators 1/8" to 1-1/2" port sizes

Shut-off & Lockout Valves 1/4" to 1-1/2" port size

Filters General Purpose Filters, Oil Removal (Coalescing) Filters, Oil Vapor Removal (Adsorbing) Filters, and Compressed Air Membrane Dryers

08.08 Vic-Check Valves

NORMAN FILTER COMPANY PRODUCT OVERVIEW

Rated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1

Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve

In-Line Filters and Coalescers with Automatic Drains

Installation and Operating Instructions Installation Instructions for SS EPE-316L Series

POWER PULSE VALVES remote pilot threaded or Quick Mount connection 3/4 to 1 1/2

Adams. Spray Lubrication

Norgren Air Preparation Products and Accessories

Stainless Steel Valves For the Sanitary Industries

WILROY. Operation. Optional Diaphragm Rupture Detection HYDRAULICALLY ACTUATED DIAPHRAGM PUMP

AURORA AND 1040 Series SUCTION DIFFUSERS, COMBINATION AND TRIPLE DUTY VALVES

2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron.

Basic Hydraulics and Pneumatics

Free Floating Lever Drain Traps For Loads to 50,000 lb/hr (22,679 kg/hr)...pressures to 1,000 psig (69 bar)

Used Fluid Handling Portable Used-Oil Gravity Drains

Water Separator. Main Line Filter. Mist Separator. Micro Mist Separator 150C 250C 350C 450C AMG 550C 2C 4C 8C 11C AFF 22C 37B 75B 150C 250C 350C 450C

Compressed Air Filters

Return line filters. Return line filters

Eurovacuum EV Series. Single Stage Oil Sealed Rotary Vane Pump

Compressed Air Components

FILTER TECHNICAL DATA COMPONENTS

3/2-way Mini Solenoid Valve

AIR LINE VALVES AND GAUGES

Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY /US

3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223

Dryaire Desiccant System

QLM and QLD Series Three-port Control Valves

Centro-Matic Automatic Lubrication Systems System Controls

Air Preparation Units Parker-Watts General Line FRL, Hi-Flow FRL & Desiccant Dryers

BERMAD Waterworks. Pressure Reducing Valve. 700 Series. Model 720. Features and Benefits. Major Additional Features

Volkswagen Jetta, Golf, GTI 1999, Liter VR6 2V Engine Mechanical, Engine Code(s): AFP 17 Engine-Lubrication (Page GR-17)

Product Manual. CVS Type 67AFR Filter Regulator. Introduction. Installation. Description

ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves

Morrison Bros. Co. General Product Specifications

introduction to constant level lubrication

The cylinder head bolts tightening stages have been updated as listed in Table 1.

Air Eliminators and Combination Air Eliminators Strainers

KNC Model 3666 Automatic Pressure Calibration System

Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations

Check Valves & Actuated Valves

High Pressure Equipment High Pressure Valves, Fittings and Tubing

Suction assembly for l IBC and 205 l drums mm suction tube Suction assembly for tanks mm suction tube.

Fittings, Tubing & Nipples

Piston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.

Automatic Control Valves WATTS EU 100 Series

Uniquely designed and engineered specifically for the pulp and paper industry.

Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling

AIR OPERATED OIL PUMPS AND KITS

Specifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S.

PVS 185, 600, 1200, 1800, 2700 Series Portable Purification Systems

STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL Purpose:

Precision Regulator. Series IR1000/2000/3000 ARJ AMR ARM ARP IR IRV VEX1 SRH SRP SRF ARX20 VCHR ITV IC PVQ VER VEA VY2 AP100.

Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93

TYPE E Main Valve Sizes 3 /8 through 12

4/2-Way Pneumatic Solenoid Valve

Hydraulic multidisc Brake H420

Valve systems Base plates, according to standard ISO Brochure

VOYAGER 570G. 744A Sprayer Control

HELPFUL HINTS ON PREPARING COMPRESSED AIR

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:

Automatic Self-Cleaning Strainers

TRANSLATION OF THE ORIGINAL MANUAL

Element D Services Plumbing

ECOCIAT. Domestic hot water heat recovery unit

Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation

In-Line Air Separators

GS-General Service Control Valves

CleanAir Air Control Equipment Accessories for superior spray finishing. Filters Regulators Gauges Valves

PRODUCT RELEASE CKMTA12 / 24. Copyright 2011 by ARB Corporation Limited

The Breather Box. High Performance Grade-D Breathing Air Filtration system. BB50-cO

Oil Sight Glass BENEFITS

Model 43AP Pneumatic Controller, Style B

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001

Pressure calibration equipment

FLASH TANK ECONOMIZER PRODUCT GUIDE

SINGLE LINE CRENTRALIZED LUBRICATION SYSTEM

HVAC/R GAS TEST GAUGES SPECIFICATIONS ACCURACY CASE SIZES CASE MATERIAL MOUNTING STYLE HOUSING MATERIAL TUBE & SOCKET MOVEMENT RANGES DIAL STANDARD

IMPORTANT DOCUMENTATION DO NOT DISCARD!

Many Products...One Source

Series IDU/IDF. Refrigerated Air Dryer

Index Page. Pumping Systems Intensifiers Gas Boosters High Pressure Generators

PC1131 Electric Air Compressor

WD600 STEAM TRAPS. Thermodynamic Steam Trap

Variable Area Flowmeters

BERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features

Medical Air Systems: Scroll

61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve

Types 66R and 66RR Low-Pressure Relief Valves

UM/ /2 or 5/3 Solenoid and air pilot actuated soft spool valves

OUT. The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter

Kompressoren. Adsorption Dryer AD

DESIGN STANDARDS SECTION

Kompressoren. Compressed Air Filters PF/DF/MF/SF/AF

Transcription:

FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor oil, etc. n inefficient system results in higher costs per unit of compressed air, improper or erratic tool operation, shortened component life and reduced capacity. Lincoln provides individual components and combined component systems to give you the highest quality for your compressed air tool operations. hanges in air pressure can affect the performance of air-powered equipment. Most equipment will operate beyond recommended pressure, but this causes excess torque, force and wear and wastes compressed air. Lincoln air regulators eliminate this problem by providing the consistent pressure required for each tool, ensuring maximum life and working efficiency for your pneumatic equipment. ir filters are essential for proper performance of air powered tools, equipment and machinery. Lincoln filters are designed to minimize water vapor and contaminates in the air supply. Install a large filter in the main distribution line immediately after the compression accumulator tank. nother smaller filter should be placed inline within 20 feet of the equipment it will protect. This ensures the removal of solid particles at point of use and most condensed moisture. Most air-operated tools, equipment and components of air systems require oil lubrication for proper function and to ensure long service life. Lincoln air line lubricators are designed to meter precise amounts of lubricant into the air supply, improving the efficiency of cylinders, valves and air motors. Lubrication is automatically provided in a nearly constant oil-to-air ratio over a wide range of air flows. ir passing through the operated device is a very fine mist that can be carried over a long distance, serving more than one tool at a time. Miniature Units 600003 Miniature Regulator ll brass construction with una N diaphragm. For 1 /4" pipe size. Maximum supply pressure 300 psig. Reduced pressure range: 0-125 psig. temperature range: -40 to 180 F. Diameter 1 3 /8", height 2 3 /4", weight 1 /2 lb. 600103 66100 600203 600401 600003 600103 Miniature Filter ll brass construction with porous bronze filter (20 micron) element and shatter proof polycarbonate bowl. For 1 /4" pipe size. Maximum supply pressure 200 psi. Maximum operating temperature 120 F. Diameter 1 9 /16", height 4", weight 3 /8 lb. 600203 Miniature Lubricator ll brass construction with shatterproof polycarbonate bowl. For 1 /4" pipe size. Maximum supply pressure 200 psi. Maximum operating temperature 120 F. Oil viscosity limitation not over 800 S.S.U. (SE #30 not under 85 F.). Diameter 1 9 /16", height 4 3 /8", weight 1 /4 lb. Gauges 66100 Gauge Registers pressures up to 200 psi. Dial diameter 2". 1/4" NPT(m) bottom connection. alibrated both in psi and kg/cm2. 66101 Gauge Same as 66100 except 1/8" NPT(m) bottom connection. 600401 Gauge Same as 66100 except with 1 /4" NPT center back connection. 66111 Same as 66100 except registers to 5000 psi. 64

FRL/irare Regulators, Filters & Lubricators D Regulators Die-cast zinc construction with stainless steel strainer and renewable brass seat. Diaphragm and disc are oil-resistant una-n. Secondary pressure side gauge connections are 1 /4" N and are sealed with removable pipe plugs. Maximum supply pressure is 300 psi (20 bar) for all sizes listed. range 0- psi (0-17 bar). temperature range: 40 120 F (4 49 ). Pipe D inches in (mm) in (mm) in (mm) in (mm) lbs (kg) 600004 1/4 3 (75) 6 (150) 1 3 /8 (35) 2 3 /8 (70) 1.8 (0.8) 600006 3/8 3 (75) 6 (150) 1 3 /8 (35) 2 3 /8 (70) 1.8 (0.8) 600008 1 /2 3 9 /16 (90) 7 (175) 1 1 /2 (38) 3 1 /4 (79) 2.8 (1.3) 600004 600012 3 /4 4 11 /16 (119) 10 (254) 1 7 /8 (48) 4 3 /8 (111) 6.2 (2.8) 600016 1 4 11 /16 (119) 10 (254) 1 7 /8 (48) 4 3 /8 (111) 6.2 (2.8) 82413 ontrol ssembly Includes 66100 Gauge and 600004 Regulator. Inlet and outlet 1 /4" N. D 82413 Filters onstruction of die-cast zinc with 40 micron filter element of porous bronze. Metal bowl with sight glass. Maximum supply pressure psi (17 bar). Maximum temperature 150 F (65 ). Pipe apacity D inches oz (cc) in (mm) in (mm) in (mm) in (mm) lbs (kg) 600104 1 /4 5 (148) 2 15 /16 (75) 5 5 /8 (143) 5 1 /8 (130) 2 1 /2 (64) 1.8 (0.8) 600106 3 /8 5 (148) 2 15 /16 (75) 5 5 /8 (143) 5 1 /8 (130) 2 1 /2 (64) 1.8 (0.8) 600108 1 /2 8 (237) 3 3 /4 (95) 6 1 /4 (159) 5 5 /8 (143) 3 1 /4 (83) 2.8 (1.3) 600112 3 /4 16 (473) 4 7 /8 (124) 8 3 /4 (222) 7 3 /4 (197) 4 9 /16 (116) 6.3 (2.9) 600116 1 16 (473) 4 7 /8 (124) 8 3 /4 (222) 7 3 /4 (197) 4 9 /16 (116) 6.3 (2.9) 600104 600301 utomatic onversion Kit onverts manual drain filter to automatic drain. Increases filter efficiency and eliminates problem of manual draining. Lubricators onstructed of die-cast zinc. Metal bowl with sight glass. Maximum supply pressure psi (17 bar). Maximum temperature 150 F (65 ). Oil viscosity maximum not over 800 S.S.U. (SE 30, not under 85 F/29 ). Note: Oil adjustment may be made tamper-proof by removing Dial Set" knob on all models. ll sizes may be filled while under pressure. D 600301 FRL/IRRE Pipe apacity D inches oz (cc) in (mm) in (mm) in (mm) in (mm) lbs (kg) 600204 1 /4 5 (148) 2 15 /16 (75) 7 5 /8 (194) 5 5 /8 (143) 2 1 /2 (64) 2.2 (1) 600206 3 /8 5 (148) 2 15 /16 (75) 7 5 /8 (194) 5 5 /8 (143) 2 1 /2 (64) 2.2 (1) 600208 1 /2 8 (237) 3 3 /4 (95) 8 1 /8 (206) 5 3 /4 (146) 3 1 /4 (83) 3.3 (1.5) 600212 3 /4 16 (473) 4 7 /8 (124) 10 1 /2 (267) 7 7 /8 (200) 4 9 /16 (116) 4.2 (1.9) 600216 1 16 (473) 4 7 /8 (124) 10 1 /2 (267) 7 7 /8 (200) 4 9 /16 (116) 4.2 (1.9) 600204 65

FRL/irare irare ir Preparation Systems Lincoln s MODULR irare Regulators, Filters and Lubricators Modular components snap into place for quick assembly and service Wide selection of sizes, styles and capacities to meet specific application requirements Modular ir Line Filters Max. ir Range - F / 602104 602106 602108 17 0 to 150-18 to 65 602109 Material of onstruction ody owl Zinc luminum Zinc* luminum* Material Sintered Polypropylene 40 Modular ir Line Regulators 602004 Max. ir Range ody Material of onstruction onnet Valve Seals ottom Plug Secondary (Gauge) onnections (in.) 602005 602006 602007 300 20 0 to 150-18 to 65 Zinc cetal rass Nitrile cetal ¹ ₈ NPT (F) 602008 602009-18 to 79 luminum luminum ¹ ₄ NPT (F) Modular ir Line Lubricators 602204 602206 602208 Max. ir 17.2 * Transparent nylon liquid level indicator lens. Range - F / 0 to 150-18 to 65-18 to 79 Material of onstruction ody owl Sight feed Dome Zinc luminum Zinc* luminum* Transp Nylon Recommended Lubricants Misting type oil 50 to 200 SSU (ISO Grade 7 to 46 at 100 F/38 ) Integrated/Modular Filter/Regulator with Gauge an be used with other irare Modular omponents. Max. ir Range - F / 602134 602136 17 0 to 150-18 to 65 602138 0.3 to 10 / -18 to 79 40 Outlet Pressure dj. Range 5 to 150 0.3 to 10 66

FRL/irare irare ir Preparation Systems Dia. 602104 ¹ ₄ 5.27 0.75 1.98 1.91 602106 Manual ³ ₈ 134 19 50 48 602108 6.95 / 177 1.00 3.15 2.89 ¹ ₂ 602109 utomatic 6.35 / 161 25 80 74 lbs/kg 1.1 0.5 1.8 0.8 Outlet Press. onnections dj. Range NPT-Female djuster (in.) D 602004 4.0 / 102 T-Handle ¹ ₄ 602005 5 to 150 2.88 / 73 1.31 2.0 3.2 Knob 602006 0.3 to 4 4.0 / 102 33 50 83 T-Handle ³ ₈ 602007 2.88 / 73 Knob 602008 10 to / 0.7 to 16 5.95 / 151 1.69 3.15 5.1 ¹ ₂ 602009 5 to 150 / 0.3 to 4 5.0 / 127 43 80 130 Knob 0.8 0.4 T-Handle 1.77 0.80 onnections NPT-Female owl apacity ozs. / ml 602204 ¹ ₄ 2.0 602206 ³ ₈ 58 D 5.27 134 1.63 41 1.98 50 1.91 48 602208 ¹ ₂ 7.0 / 207 6.95 / 177 2.12 / 53 3.15 / 80 2.89 / 74 1.6 / 0.7 1.1 0.5 FRL/IRRE ¹ ₄ 5.27 134 D 602134 602136 Manual ³ ₈ 2.89 73 1.98 50 3.29 83 1.2 0.5 602138 ¹ ₂ 6.95 / 177 4.98 / 127 3.15 / 80 5.10 / 130 2.6 / 1.2 67

FRL/irare irare ir Preparation Systems Modular ir Line ombination Units Filter-Regulator with Gauge-Lubricator Max. ir * Transparent nylon liquid level indicator lens. Range - F / Outlet Pressure dj. Range Lubricator owl apacity ozs./ml 2.0 58 85387-4 0 to 150 85387-6 -18 to 65 5 to 150 17 40 0.3 to 10 85387-8 / -18 to 79 7.0 / 207 Modular ir Line ombination Units Filter-Regulator with Gauge Max. ir Range - F / 0 to 150 / -18 to 65 85388-4 85388-8 17 / -18 to 79 40 Outlet Pressure dj. Range 5 to 150 0.3 to 10 * Transparent nylon liquid level indicator lens. Modular ir Line ombination Units Filter-Lubricator Max. ir * Transparent nylon liquid level indicator lens. Range - F / Lubricator owl apacity ozs. / ml 85389-8 / 17.2 / -18 to 79 40 7.0 / 207 High-apacity ir Line Filters 602112 602113 602116 602117 Max. ir 17.2 Range - F / -18 to 79 Material of onstruction ody luminum owl luminum* w/ Pyrex sight glass Material Sintered ronze 50 * Pyrex liquid level indicator. 68

FRL/irare irare ir Preparation Systems ¹ ₄ 5.27 134 85387-4 85387-6 Manual ³ ₈ 1.63 41 6.46 164 3.3 1.5 85387-8 ¹ ₂ 6.95 / 177 2.12 / 53 10.52 / 267 6.2 / 2.8 85388-4 ¹ ₄ 5.27 / 134 1.31 / 33 4.22 / 108 2.1 / 1.0 Manual 85388-8 ¹ ₂ 6.95 / 177 1.69 / 43 6.84 / 174 4.2 / 2.0 85389-8 Manual ¹ ₂ 6.95 / 177 2.12 / 53 6.84 / 174 3.8 / 1.7 602112 Manual 10.44 / 265 ³ ₄ 602113 utomatic 10.06 / 256 602116 Manual 10.44 / 265 1 602117 utomatic 10.06 / 256 Dia. 1.25 32 4.75 121 5.52 140 lbs/kg 4.1 1.9 FRL/IRRE 69

FRL/irare irare ir Preparation Systems High-apacity ir Line Regulators 602012 602013 602016 Max. ir 300 20 Range -18 to 79 ody Material of onstruction onnet Valve Seals luminum luminum luminum Nitrile ottom Plug luminum Secondary (Gauge) onnections (in.) ¹ ₄ NPT (F) High-apacity ir Line Lubricators 602212 602216 Max. ir 17.2 Range - F / -18 to 9 Material of onstruction Sight feed ody owl Dome luminum luminum* Transp Nylon Recommended Lubricants Misting type oil 50 to 200 SSU (ISO Grade 7 to 46 at 100 F/38 ) * Pyrex liquid level indicator. High-apacity ir Line ombination Units High apacity Filter-Regulator with Gauge-Lubricator Max. ir 85387-12 85387-16 17 Range - F / -18 to 79 50 Outlet Pressure dj. Range 5 to 125 0.3 to 8.6 Lubricator owl apacity ozs./ml 32 946 * Pyrex liquid level indicator. High-apacity ir Line ombination Units Filter-Regulator with Gauge * Pyrex liquid level indicator. Max. ir Range - F / Outlet Pressure dj. Range 85388-12 / 17 / -18 to 79 50 5 to 125 / 0.3 to 8.6 High-apacity ir Line ombination Units Filter-Lubricator * Pyrex liquid level indicator. Max. ir 85389-12 85389-16 17 Range - F / -18 to 79 50 Lubricator owl apacity ozs. / ml 32 946 70

FRL/irare irare ir Preparation Systems Outlet Press. dj. Range onnections NPT-Female (in.) D djuster 602012 602013 10 to / 0.7 to 16 5 to 150 / 0.3 to 10 5.69 / 145 ³ ₄ 2.38 4.25 2.38 4.71 / 120 60 108 60 T-Handle Knob 602016 10 to / 0.7 to 16 1 5.69 / 145 T-Handle 2.5 1.1 onnections NPT-Female owl apacity ozs. / ml D 602212 ³ ₄ 32 602216 1 946 10.24 260 2.22 56 4.50 114 5.52 140 3.6 1.6 85387-12 Manual 85387-16 1 ³ ₄ 10.44 265 2.22 56 14.75 375 10.6 4.8 D 85388-12 Manual ³ ₄ 10.44 / 265 2.38 / 60 10 / 254 5.52 / 140 6.9 / 3.1 FRL/IRRE 85389-12 Manual 85389-16 1 ³ ₄ 10.44 265 D 2.22 56 10.25 260 5.52 140 7.8 3.5 71

FRL/irare irare ir Preparation Systems Miniature ir Line omponents ir Line Filter Max. ir Range - F / Material of onstruction ody owl 602103 150 / 10.3 0 to 125 / -18 to 79 Zinc Polycarbonate Material Porous Polypropylene 50 Miniature ir Line omponents ir Line Regulator Max. ir Material of onstruction Secondary (Gauge) Range ody onnet Valve Seals ottom Plug onnections (in.) 602003 300 / 20 0 to 150 / -18 to 65 Zinc cetal rass/nitrile cetal ¹ ₈ NPT (F) Miniature ir Line omponents ir Line Lubricator Max. ir Range - F / Material of onstruction ody owl Sight feed Dome 602203 150 / 10.3 0 to 125 / -18 to 52 luminum Polycarbonate Transp. Nylon Recommended Lubricants Misting type oil 50 to 200 SSU (ISO Grade 7 to 46 at 100 F/38 ) Miniature ir Line ombination Units Filter-Regulator with Gauge-Lubricator Max. ir Range - F / Outlet Pressure dj. Range Lubricator owl apacity ozs./ml 85672 150 / 10.3 0 to 150 / -18 to 65 50 5 to 100 / 0.3 to 6.9 1.0 / 30 Miniature ir Line ombination Units Filter-Lubricator Max. ir Range - F / Lubricator owl apacity ozs. / ml 85674 150 / 10.3 0 to 125 / -18 to 52 5 1.0 / 30 72

FRL/irare irare ir Preparation Systems Dia. lbs/kg 602103 Manual ¹ ₄ 3.25 / 83 0.38 / 10 1.63 / 42 1.45 / 37 0.3 / 0.12 Outlet Press. dj. Range onnections NPT-Female (in.) D djuster 602003 5 to 100 / 0.3 to 6.9 ¹ ₄ 2.52 / 64 0.39 / 10 1.63 / 41 1.45 / 37 Knob 0.3 / 0.13 onnections NPT-Female in. owl apacity ozs. / ml Dia. 602203 ¹ ₄ 1.0 / 30 3.25 / 83 1.98 / 50 1.63 / 41 1.45 / 37 0.3 / 0.13 Dia. 85672 Manual ¹ ₄ 3.25 / 83 1.98 / 50 5.61 / 143 1.45 / 37 1.3 / 0.6 FRL/IRRE Dia. 85674 Manual ¹ ₄ 3.25 / 83 1.98 / 50 3.66 / 93 1.45 / 37 0.9 / 0.4 73

FRL/irare irare ir Preparation Systems Modular ir Line Equipment ccessories Lockout Valve Install in-line or modular with other irare products to help conform to OSH Lockout Regulations. In the closed position, valves block inlet air flow and exhaust downstream air. For Modular Use With For In-Line Use With 247770 ¹ ₄" Modular ¹ ₄" 247771 ³ ₈" Modular ³ ₈" 247772 ¹ ₂" Modular ¹ ₂" Max. ir 17 Range F / 0 to 150-20 to 65 Modular ir Line Equipment ccessories Quick lamp Use with Modular ir Line omponents to provide modular installation capability. Flanges on the products slide into V grooves in the quick clamp. Two face-sealing o-rings in the quick clamp provide an air tight connection when the clamp is closed. For Modular s 247782 ¹ ₄" and ³ ₈" 1.50 / 38 247783 ¹ ₂" and ³ ₄" 2.00 / 51 Modular ir Line Equipment ccessories Quick lamp Wall Mounting racket Use with quick clamp to provide secure mounting to a wall, machine panel or other flat surface. For Modular s 247792 ¹ ₄" and ³ ₈" 2.32 / 59 0.55 / 14 2.91 / 74 247793 ¹ ₂" and ³ ₄" 3.25 / 83 0.95 / 24 4.0 / 102 Modular ir Line Equipment ccessories Quick Mount Pipe dapters Use with quick clamp to provide threaded connections to the system piping. For Modular use with - in. 247787 ³ ₈" Modular ³ ₈ 247789 ¹ ₂" and ³ ₄" Modular ³ ₈ 247791 ³ ₄ Modular ir Line Equipment ccessories Manifold lock Installs with quick clamps. s are threaded pipe to provide manifolding capability for up to three components. in. For Modular s Dimensions-in. / mm 247795 ³ ₄ ¹ ₂" and ³ ₄" 2.27 / 57.8 3.15 / 80 74

FRL/irare irare ir Preparation Systems Modular ir Line Equipment ccessories Pressure Switch Monitors air pressure and provides an electrical signal when the pressure drops below or exceeds the preset pressure. Installs between two quick clamps. lso provides three additional ¹ ₄" auxiliary outlets. For Modular s Maximum Inlet Pressure Range F / djustment Range 247797 ¹ ₂" and ³ ₄" / 17 0 to 150 / -20 to 65 30 to 150 / 2 to 10 Modular ir Line Equipment ccessories Tamper Resistant over & Seal Wire Install on the adjusting knob of regulators to help prevent unauthorized adjustment of the pressure setting. For Modular s 247778 ¹ ₂" and ³ ₄" Modular ir Line Equipment ccessories Wall Mount racket Use to secure Modular ir Line components to a wall, machine panel or other flat surface. For Modular s 247775 ¹ ₄" and ³ ₈" 247776 ¹ ₂" and ³ ₄" ir Line Equipment ccessories Mounting racket and Nut-Miniature Use to secure Miniature ir Line components to a wall, machine panel or other flat surface. omponent 247774 ll Regulators and Lubricators ir Line Equipment ccessories Pressure Gauges vailable in ¹ ₈" NPT and ¹ ₄" NPT back connection. FRL/IRRE For Regulator s Gauge Dia. onnection Pressure Range 247843 ¹ ₄" and ³ ₈" 1¹ ₂" ¹ ₈" NPT 0 to 160 / 0 to 11 247844 ¹ ₂", ³ ₄" and 1" 2" ¹ ₄" NPT 247863 0 to 300 / 0 to 20 75