Training Program 2016 Hydraulic Valves, Controls and Drive Controlled Pumps in Typical Applications
General The Hydraulic Controls Division Europe is a worldwide leading manufacturer of innovative and competitive hydraulic industrial valves, manifolds and control systems. We provide solutions, systems and services that advance the performance of our customers applications. In our plants in Germany (Kaarst and Oberndorf) and Finland (Tampere), we produce, assemble and test products that are supplied to machine manufacturers and industrial companies all over the world. Thank you for your interest in our products and services. Comprehensive, specific training is waiting for you. Please contact us for current details and matters of accessibility. Our courses require formal registration and participants limited to 12. Attending is free of charge. Normally the courses take place at the Parker location in Kaarst near Duesseldorf, Germany. We will be glad to assist in booking a hotel for you. HCDE contact: Organisational: petra.weinert@parker.com +49 (0) 2131 / 513-257 Technical: volker.pahl@parker.com +49 (0) 2131 / 513-136 For general training in hydraulics please get in touch with the local Sales Company or with Hydraulics Group Europe in Boras, Sweden. Group contact: Catharina Leff-Hallstein, cleffhal@parker.com +46 (0) 33 700 53 52 2
Industrial valves and electrohydraulics Introductory course: International Product Training In English Target group: Sales engineers, members of technical support staff, sales partners, users Requirements: Basic knowledge of hydraulics Teaching and learning aids: Work folder Duration: 3 days Learning objective Transfer of extended knowledge regarding the Parker industrial valve and electro-hydraulic product range. After this training the participant will be capable to define products on the basis of catalogues, to answer questions concerning valve and application technologies and to identify potential application areas. In addition, the participants will learn to put electronic modules into operation and to operate the test unit EX-M05. Contents: Overview of hydraulic valves: Basics, functioning, new technologies and products DFplus servo proportional valves: Overview, functioning, selection criteria, application examples Digital electronic modules P*D: Overview, functioning, selection criteria, application examples, using software ProPxD Hands-on: Installation of electronic modules Electrohydraulic controller Compax3F: Overview Test unit EX-M05: Overview, functioning and applications Pressure, flow and check valves, slip-in cartridge valves: Overview, functioning, application examples Applications: Introduction Code: IPT-GB Date: November 8 to 10, 2016 Beginning: November 8 at 9.00 a.m. End: November 10 at 3.00 p.m. 3
Drive Controlled Pump Course: Variable-speed Hydraulic Pumps Application and Product Training for the Drive Controlled Pump Target group: Project managers, customer service and technical support personnel. Requirements: Basic technical training and knowledge respectively practical experience with hydraulic systems. Teaching and learning aids: Work folder Duration: 1 day Learning objective Transfer of extended knowledge regarding the Parker Drive Controlled Pump. After this training the participant will be capable to define products on the basis of the catalogue, to answer questions concerning Drive Controlled Pump and application technologies and to identify potential application areas. Contents: Introduction to Drive Controlled Pump, successful setup of the Drive Controlled Pump Presentation of Drive Controlled Pump equipment technology Presentation of the user software Setup/diagnosis of a motor-pump-unit Code: DCP-GB Date: April 5, 2016; September 27, 2016 Each day from 8.30 a.m. to 5.00 p.m. 4
Registration Training Code: Ort / Location: Kaarst Termin / Date: von / from bis / to Teilnehmer / Participant: Nachname / Last name Vorname / First name Funktion (seit) / Function (since) Nachname / Last name Vorname / First name Funktion (seit) / Function (since) Nachname / Last name Vorname / First name Funktion (seit) / Function (since) Adresse / Adress: Firma / Company Abteilung / Department Straße, Hausnr. / Street, no. PLZ / ZIP code Stadt / City Tel. / Phone Fax E-Mail Hotel: Sie wünschen eine Unterbringung im Hotel: You desire hotel accomodation: ja / nein yes / no Wenn wir in Ihrem Auftrag ein Hotelzimmer buchen sollen / If we should make your hotel reservation in your name Tag der Ankunft / Day of arrival Tag der Abfahrt / Day of departure Unterschrift / Signature: Contact: Parker Hannifin Manufacturing Germany GmbH & Co. KG Hydraulic Controls Division Europe Gutenbergstr. 38 41564 Kaarst, Germany Tel.: (+49) 181 99 44 43 0 E-mail: valveshcd@parker.com 5
2016 Parker Hannifin Corporation. All rights reserved. Catalogue HY11-3277/UK, 11/2015 Parker Hannifin Manufacturing Germany GmbH & Co. KG Hydraulic Controls Division Europe Gutenbergstr. 38 41564 Kaarst, Germany Tel.: (+49) 181 99 44 43 0 E-mail: valveshcd@parker.com www.parker.com