Catalogue
Introduction Adlerac is a manufacturing division of Falcon Electronics (Pty) Ltd. Adlerac was established to manufacture industry leading Modem Racks, Wallboxes and Patch Panels for the computer networking industry. All 19 modem racks are made to conform to DIN4194 specifications (sections 1 through 5). The basic structure of the Adlerac is based on a tried and proven European design and modified to be more functional and user friendly. The adaptive design changes were made through careful research by our own technical department to suite most electronic and datatransmission applications. The large range of available options and accessories gives the Adlerac almost limitless variations in design and configuration. The large range of accessories and fittings for the Adlerac allows for the variety and diversity to match your ideas and requirements. In addition to technical detail and ongoing development the aesthetics of the Adlerac are unmatched in the South African market. We are also, due to our technical expertise in the field, able to assist customers with any special purpose racking and consoles, which will save you the effort and time required to meet your specifications efficiently Our production facility has the capability to manufacture leads to customer specification in small or large quantities. Each lead made is tested on our computerised test jigs and leaves the factory with a test proof. In conclusion all of this along with the full backing and resources of the holding company makes us one of South Africa s leaders in the field of Modem Racking Systems. Racking Enclosure
Certification Adlerac is in constant pursuit of service excellence to this end the company firmly believes in offering clients quality products and peace of mind. To ensure consistently high service delivery the Company drafted and implemented a rigorous Quality Management System covering all aspects of the design & manufacturing process and customer interface. In order to ensure adherence to this QMS the Company proceeded to get listed as an ISO9002 manufacture with the SABS. Adlerac has for more than a decade maintained its ISO quality listing for its entire operation. Such an achievement can only be attributed to a company who espouse a culture of quality and service excellence with products to match. Adlerac is the only company in its field to hold the prestigious SABS ISO9001:2000 certification for its entire factory and all its operations. Adlerac is proud to have been accredited with the Proudly South African membership. Adlerac strives consistently to improve its products to its clients and offers customers viable alternatives to extremely expensive international imports. Adlerac's modular racking system is flexible enough to allow almost limitless design configuration, along with a strong network of local suppliers affords the customer further design flexibility. Design capability, manufacturing experience, documented quality procedures and the ongoing quest for customer satisfaction ensures the maintenance of our local content and the security of our dedicated South African staff. All Adlerac products are fully manufactured in South Africa
The Adler Gold Range The Gold Range from Adlerac is its most popular rack and is the stalwart in the range. This popular rack was designed to industry standard DIN41494 specifications (sections 1 through 4). Its frame is constructed from rigid light weight extruded aluminium and finished with stylish and distinctive detailing. This compact rack is extremely modular in design and thus offers customers freedom of installed equipment and exceptional ease of use. Features include a quality SABS approved smoked & toughened, hinged & removable glass door with lock; hinged & removable side panels strengthened by its double bent edges, welded corners and top hat section; raised top for ventilation; adjustable depth reducers; adjustable punched profiles and adjustable feet. 600mm x 600mm Aluminium Frame Rack 1R19-610 19" x 10U usable 600mm 650mm 600mm 1R19-613 19" x 13U usable 600mm 783mm 600mm 1R19-620 19" x 20U usable 600mm 1094mm 600mm 1R19-625 19" x 25U usable 600mm 1316mm 600mm 1R19-634 19" x 34U usable 600mm 1716mm 600mm 1R19-638 19" x 38U usable 600mm 1894mm 600mm 1R19-643 19" x 43U usable 600mm 2116mm 600mm 1R19-647 19" x 47U usable 600mm 2294mm 600mm 600mm x 800mm Aluminium Frame Rack 1R19-820 19" x 20U usable 600mm 1094mm 800mm 1R19-825 19" x 25U usable 600mm 1316mm 800mm 1R19-834 19" x 34U usable 600mm 1716mm 800mm 1R19-838 19" x 38U usable 600mm 1894mm 800mm 1R19-843 19" x 43U usable 600mm 2116mm 800mm 1R19-847 19" x 47U usable 600mm 2294mm 800mm 700mm x 800mm Aluminum Frame Rack 1R23-820 23" x 20U usable 700mm 1094mm 800mm 1R23-825 23" x 25U usable 700mm 1316mm 800mm 1R23-834 23" x 34U usable 700mm 1716mm 800mm 1R23-838 23" x 38U usable 700mm 1894mm 800mm 1R23-843 23" x 43U usable 700mm 2116mm 800mm 1R23-847 23" x 47U usable 700mm 2294mm 800mm 800mm x 800mm Aluminum Frame Rack 1R24-825 24" x 25U usable 800mm 1316mm 800mm 1R24-834 24" x 34U usable 800mm 1716mm 800mm 1R24-838 24" x 38U usable 800mm 1894mm 800mm 1R24-843 24" x 43U usable 800mm 2116mm 800mm 1R24-847 24" x 47U usable 800mm 2294mm 800mm Racking Enclosure
The Adlerac Platinum Range This popular rack was designed to industry standard DIN41494 specifications (sections 1 through 4). Its frame is constructed from rigid light weight extruded aluminium and finished with stylish and distinctive detailing. This light weight cabinet is built upon Adlerac s previous and very successful Gold Range and offers the same modularity in design which our customers have become accustomed to. Improved choice of installed equipment and many ease of use features. Additional features include a quality SABS approved smoked & toughened, hinged, removable & lockable glass door with in a ventilated steel frame; hinged & removable side panels strengthened by its double bent edges, welded corners and top hat section; raised top with ventilation slots for added ventilation; adjustable depth reducers; adjustable punched profiles and adjustable feet. 600mm x 600mm Aluminium Frame Rack 1R19-610P 19" x 10U usable 600mm 650mm 600mm 1R19-613P 19" x 13U usable 600mm 783mm 600mm 1R19-620P 19" x 20U usable 600mm 1094mm 600mm 1R19-625P 19" x 25U usable 600mm 1316mm 600mm 1R19-634P 19" x 34U usable 600mm 1716mm 600mm 1R19-638P 19" x 38U usable 600mm 1894mm 600mm 1R19-643P 19" x 43U usable 600mm 2116mm 600mm 1R19-647P 19" x 47U usable 600mm 2294mm 600mm 600mm x 800mm Aluminium Frame Rack 1R19-820P 19" x 20U usable 600mm 1094mm 800mm 1R19-825P 19" x 25U usable 600mm 1316mm 800mm 1R19-834P 19" x 34U usable 600mm 1716mm 800mm 1R19-838P 19" x 38U usable 600mm 1894mm 800mm 1R19-843P 19" x 43U usable 600mm 2116mm 800mm 1R19-847P 19" x 47U usable 600mm 2294mm 800mm 700mm x 800mm Aluminium Frame Rack 1R23-820P 23" x 20U usable 700mm 1094mm 800mm 1R23-825P 23" x 25U usable 700mm 1316mm 800mm 1R23-834P 23" x 34U usable 700mm 1716mm 800mm 1R23-838P 23" x 38U usable 700mm 1894mm 800mm 1R23-843P 23" x 43U usable 700mm 2116mm 800mm 1R23-847P 23" x 47U usable 700mm 2294mm 800mm 800mm x 800mm Aluminum Frame Rack 1R24-825P 24" x 25U usable 800mm 1316mm 800mm 1R24-834P 24" x 34U usable 800mm 1716mm 800mm 1R24-838P 24" x 38U usable 800mm 1894mm 800mm 1R24-843P 24" x 43U usable 800mm 2116mm 800mm 1R24-847P 24" x 47U usable 800mm 2294mm 800mm
The Adlerac Platinum Range Vented Front Door Door with ventilation slots to promote additional cooling for high performance equipment User Friendly Locking System Double locking system for secure and convenient use. Hinged Door Panels All doors on Adlerac s Platinum range feature hinged panels for quick access and easy removal of any door on the rack. Double Bent and Vented Removable Top The top retains Adlerac s ease of use features by enabling easy removal of the top for access Racking Enclosure
Adlerac 1 Meter - High Performance Server Rack Build especially for your favourite High Performance Servers from Compaq, Dell, Hewlett Packard, IBM, Sun and NEC. Designed to TIA specifications with a depth of 1 meter. The additional depth allows for complete freedom of equipment. The frame is constructed from rigid extruded aluminium and finished with Adler s distinctive detailing. Features include the standard range of Adlerac quality trimmings: quality SABS approved smoked & toughened, hinged & removable glass door with lock; hinged & removable side panels strengthened by its double bent edges, welded corners and top hat section; raised top for ventilation; adjustable depth reducers; adjustable punched profiles and adjustable feet. For additional cooling Adlerac offers a range of ventilated doors that allow your servers to hum away sweetly. 600mm x 1000mm Aluminum Frame Rack 1R19-1020 19" x 20U usable 600mm 1094mm 1000mm 1R19-1025 19" x 25U usable 600mm 1316mm 1000mm 1R19-1034 19" x 34U usable 600mm 1716mm 1000mm 1R19-1038 19" x 38U usable 600mm 1894mm 1000mm 1R19-1043 19" x 43U usable 600mm 2116mm 1000mm 1R19-1047 19" x 47U usable 600mm 2294mm 1000mm
The Adlerac Gold Wallbox The wallbox is constructed with a rigid aluminium frame and sheet metal panels. It has a toughened smoked and lockable glass door. The inside has adjustable punched profiles for easy storage of equipment of any size. This is by far the most attractive wallbox on the market and is ideal for installations where aesthetic appeal is a premium requirement. With standard sizes up to 20'U' and a useable depth of 450mm it can be a viable alternative to a free standing rack. The box is finished in high quality epoxy powder coating. Aluminium Wallbox 1RWB-304 19" x 4U usable 570mm 220mm 300mm 1RWB-306 19" x 6U usable 570mm 310mm 300mm 1RWB-312 19" x12u usable 570mm 575mm 300mm 1RWB-454 19" x 4U usable 570mm 220mm 450mm 1RWB-459 19" x 9U usable 570mm 440mm 450mm 1RWB-459 19" x12u usable 570mm 575mm 550mm 1RWB-4512 19" x15u usable 570mm 710mm 450mm Racking Enclosure
The Adlerac Steel Wallbox This box is fabricated entirely in sheet metal with a lockable glass door. This unit provides a low cost solution for installations where a free standing rack may not be the ideal solution. Punched profiles are adjustable for added flexibility. The range offers several useful variations including a choice of swing frame collars, removable side panels (on request) and steel doors and back panels (on request). The boxes are pre-treated and finished in epoxy powder coating. The standard colour supplied is goose grey. Steel Wallbox 1RWBS-304 19" x 4U usable 570mm 220mm 300mm 1RWBS-404 19" x 4U usable 570mm 220mm 400mm 1RWBS-406 19" x 6U usable 570mm 310mm 400mm 1RWBS-409 19" x 9U usable 570mm 440mm 400mm 1RWBS-412 19" x12u usable 570mm 575mm 400mm 1RWBS-415 19" x15u usable 570mm 710mm 400mm 1RWBS-420 19" x 20U usable 570mm 930mm 400mm Steel Wallbox with 100mm Swing Frame 1RWBSS-304 19" x 4U usable 570mm 220mm 300mm + 100mm 1RWBSS-404 19" x 4U usable 570mm 220mm 400mm + 100mm 1RWBSS-406 19" x 6U usable 570mm 310mm 400mm + 100mm 1RWBSS-409 19" x 9U usable 570mm 440mm 400mm + 100mm 1RWBSS-412 19" x 12U usable 570mm 575mm 400mm + 100mm 1RWBSS-415 19" x 15U usable 570mm 710mm 400mm + 100mm 1RWBSS-420 19" x 20U usable 570mm 930mm 400mm + 100mm Steel Wallbox with 200mm Swing Frame 1RWBST-406 19" x 6U usable 570mm 310mm 400mm + 200mm 1RWBST-409 19" x 9U usable 570mm 440mm 400mm + 200mm 1RWBST-412 19" x 12U usable 570mm 575mm 400mm + 200mm 1RWBST-415 19" x 15U usable 570mm 710mm 400mm + 200mm 1RWBST-420 19" x 20U usable 570mm 930mm 400mm + 200mm Steel Wallbox with Removable Side Panels 1RWBST-409 19" x 9U usable 570mm 440mm 500mm 1RWBST-412 19" x 12U usable 570mm 575mm 500mm 1RWBST-415 19" x 15U usable 570mm 710mm 500mm 1RWBST-420 19" x 20U usable 570mm 930mm 500mm
The Adlerac VCR Rack The Adlerac VCR Rack was designed in response to the upsurge in the security market. These cabinet are especially designed for surveillance equipment and offers smart equipment support. The Racks are produced in the popular broadcast brown but additional colours are also available upon request. This popular rack conforms to the 19" TIA standard. Its frame is constructed from rigid light weight extruded aluminium. Standard with the rack is a circuit protected power supply with room for a UPS. Equipment is supported on four punched profiles and equipment support rails are used to hold the equipment. Since the equipment is required to run 24/7 shifts additional 6 way fans are recommended for adequate cooling. Extremely popular in all cinema theatres, broadcast studios, casinos, banks and shopping malls The Adlerac Workstation Console The Adlerac Workstation Console is manufactured for environments where a secure workstation and printer combination is required. This unit is manufactured in wood or sheet metal. It comes equipped with a sleek retractable sliding tray for keyboard and mouse. It also contains a secure lockable upper compartment for printers or sensitive equipment.
Adlerac Custom Products Distribution Racks Adlerac Rear Management Distribution Rack The Cost Effective Relay Solution to Help you organise your computer room. - Rear Cable Management for excessive cable densities - Fits TIA 19" equipment - Sized from 34'U' to 47'U' - Constructed from durable steel - Double bent steel for additional strength and durability - Perfect for mounting Patch Panels and Telecommunications Equipment Adlerac Side Management Distribution Rack The Convenient and Cost Effective Distribution Cabinet. - Side Cable Management for easy peel off to patch bays - Fits TIA 19" equipment - Sized from 34'U' to 47'U' - Constructed from durable steel - Double bent steel for additional strength and durability - Perfect for mounting Patch Panels and Telecommunications Equipment
Adlerac Custom Products Adlerac Slack Rack Adlerac Comms Rack The ideal solution for massive cable densities experienced today by sprawling enterprises. This slack cabinet does exactly what its name implies - take all the excess cable and stores it away neatly. It fits flush against Adlerac s Gold Rack and thus blends in harmoniously with its environment. Available in heights of 38'U', 43'U' and 47'U' 300mm wide with depths of 600mm and 900mm. Adlerac Split Rack This is the ideal solution for all telecommunications rooms. This Adlerac cabinet is fitted to a telecoms wall and houses the interconnecting blocks for all telecommunications links from outside the building. Various telecoms panel options are available. Available in heights of 38'U', 43'U' and 47'U' 300mm deep and 600mm or 900mm wide options available. Adlerac Ventilated Rack This ingenious design from Adlerac is the ideal solution for server rooms where various people need to access the cabinet. The cabinet is split and has three lockable compartments. The bottom is where the server is housed, in the middle is your lockable keyboard with monitor and switching equipment. This design enables access to the right people to the right equipment. Thereby securing that unnecessary downtime is avoided. This Adlerac was designed for equipment that requires high levels of cooling in environments that are exposed to insects. All cooling panels are ventilated and access into the rack is sealed.
Adlerac Equipment Support Adlerac Cable Tray & Finger Trunking Keyboard Trays - Manage your cable better - Cable trays available in all sizes - Cable ties slots available - Finger trunking available in all sizes - The finishing touch to guide your cables - Sliding Tray for Keyboard and mouse - Fits TIA 19" Racks - Lockable front tray - Fits a mini-keyboard Sliding Trays Keyboards Various sliding Tray - Fits TIA 19", 23" and 24" Racks - 330mm and 450mm Options - Various colour options Mini-Keyboards - Fits neatly into all Adlerac sliding trays - Available in Din or PS2 - All windows keys Equipment Support Rails Plinths Ideal option for heavy equipment fits to the front and rear of Adler punched profiles. - Available in all sizes - Many colour options standard The perfect solution to horizontal cable access to a rack - Available in heights of 100mm and 150mm - Access panels on sides of plinths - Finished in the same colour of rack purchased
Adlerac Equipment Support Category 5 Patch Panels Category 5E Patch Leads Various Patch Panels for Networking Keystones - Patch Panels combinations are 12 way, 24 way and 36 way All high performance Category 5E Leads. - Lenghts from 0,5m to 5m. - Supplied with test conformance certificate Monitor Panel Custom Leads Monitor Panel for security consoles - For 14" and 15" Monitor All custom leads made from small to bulk quantities - leads available are RS232, Telecom leads, SCSI Leads, Audio leads, VGA leads and any requested Monitor Enclosure Castors Monitor Enclosures for all 14" and 15" Monitors - Includes suspension panelling - All the necessary mounting holes A wide variety of castors - Break and non-break - Adjustable feet for racks
Adlerac Equipment Support Fans Fan Blower Unit High performance fans for that all to important cooling in todays high-tech equipment. - Cooling options are 2 way, 4 way and 6 way - Panels are colour coded to ordered rack. - Fans are easily replaced upon seizure. The Ideal solution for when cooling is needed closer to the equipment. This blower unit can be fitted to the 19" front of the cabinet and has a power switch fitted to the front of the unit. Flat Trays Front Mount Trays When heavy equipment needs mounting use an Adler flat tray. These are ideal for heavy servers or UPS batteries. - Sizes include 330mm and 450mm. Easy front mount trays are your cheaper alternative mounting surface for your equipment. Ideal for hubs and monitors. - Sizes include 150mm, 250mm, 330mm and 450mm. - Colour supplied is per requested rack. Cable Management Blank Panels All cable management options are available from Adlerac. - 1'U' and 2'U' brush panels for neatly looking cable management - Cable management rings to hold cable densities in order. - Rear cable management trays for neat cable management when terminating to sockets. Adler blanking and ventilated panels. - Sizes from 1'U' to 6'U' - Ventilation options perforated, - Colours
Adlerac Equipment Support Powers Standard Powers IEC Fitted to the rear of all cabinets with standard South African 3 pin sockets. Comes standard with power indication light and circuit breaker/s to protect against overload. - Combination include 3 way, 5 way, 10 way and 20 way. - Available with lightning protection option. Fitted to the rear of all cabinets with IEC Sockets. Comes standard with power indication light and circuit breaker/s to protect against overload. - Combination include 3 way, 5 way, 10 way and 20 way. - Front rack mount options also available. - Available with lightning protection option. Powers Front Mount Powers Dedicated Fitted to the front of all racks on the 19 profiles. Comes standard with power indication light and circuit breaker/s to protect against overload. - Dedicated power sockets also available - Combination include 3 way, and 5 way. - Available with lightning protection option. British Power Fitted to the rear of all cabinets with Dedicated South African 3 pin sockets. Comes standard with power indication light and circuit breaker/s to protect against overload. - Combination include 3 way, 5 way, 10 way and 20 way. - Front rack mount options also available. - Available with lightning protection option. Dataducts Fitted to the rear of all racks with British power sockets. Comes standard with power indication light and circuit breaker/s to protect against overload. - Combinations include 3, 5, 10 and 20 way. - Front rack mount options also available. - Available with lightning protection option. - Other country power options also supplied upon request. These units are used in conjunction with NTU s and Modems. They fitted to the rear of all racks with telco insulation displacement connectors. - Combination include 5 way, 10 way and 20 way. - Available with lightning protection option.
Huge Inventory Quality Products Customer Care 51-57 Gibbs Road, Devland, Gauteng, Republic of South Africa, Tel: +27 11 938 8951, Fax: +2711 938 8961 Website: www.adlerac.co.za