AT FIRST SIGHT Important informations

Technical catalogue

AT FIRST SIGHT Important informations TIPS FOR USING THIS GUIDE Our new technical catalogue includes now all important information you will need for planing or call for tenders. Every single article with photo, technical data and specification is described on one page. That makes it easy for you to find all necessary technical information for each LAUFEN article. Technical data Here are the main points on one view: article number for ordering certified standards dimensions in mm standard option (on stock) special options (not on stock) water inlet for urinals water outlet for toilets and urinals weight in kg accessories excl. suits all ceramic LAUFEN articles mounting accessories incl. automatically on delivery mounting accessories excl. which we recommend for installation and have to be ordered separately Specifications You can import that text directly in your offer for projects. For each article and even for each size of washbasin a separate text. Technical data All necessary measurements in scale 1:20, accessories 1:10 are included in the drawings. You can easily use them for planing. INSTALLATION ADVISES General All indicated measurements to the floor or the wall are understood to be inclusive of the finished surface, that means from the finished floor or finished wall. The mounting surfaces of the sanitary fixtures are flat. To compensate for irregularities in the wall or floor, levelling material is to be applied to the mounting surfaces. Suitable materials are white cement, grouting cement, Portland cement, etc. Levelling material is available as LAUFEN product no. 89461.4. INSTALLATION ADVISES Washbasins / Small washbasins As a rule, the mounting height of approx. 850 mm for washbasins and small washbasins refers to the height above the finished floor level, to the upper edge of the front of the washbasin or small washbasin. If it is decided to mount the fixtures above or below this height, the connections for the trap and corner valves must be altered appropriately. In case of pedestal mounting, the height of the upper edge of the washbasin must be fixed according to the height of the pedestal. The dimensions stated for the trap connection heights in washbasins and small washbasins apply the off-centre waste fittings. In the case of plug or screen valves, approx. 50 mm must be added to trap connection height depending on the type of fitting. INSTRUCTIONS FOR CARE The glaze of ceramic fixtures resists the acids, solvents and alkalis contained in most toiletries, cleansers and cosmetics. Please remove residues of such agents and refer to the instructions of the manufacturer of these products. If sanitary fixtures with a ceramic trap (WC s, urinals, etc.) are exposed to frost, a suitable anti-freezing preventative must be added to the water in the trap. For ceramic with WonderGliss surfaces and non ceramic parts, e.g. WC seat, furniture, stone, metal, etc. use abrasive cleaners. SPECIAL REMARKS Owing to different light conditions or variations in sanitary ware surfaces, identical colours may evoke different impressions. Subject to alterations. Subject to printing errors. Models and technical details were updated before printing. The manufacturer reserves the right of alterations in construction and details. GUARANTEE 5 years guarantee for ceramic products when installed by a licensed plumber. Wall and floor surfaces must withstand the surface pressures imposed by the mounting and utilisation of the fixtures. The ability of the sanitary fixtures to bear the loads imposed in use depends on an adequate load-bearing capacity in the walls and floors on which they are mounted. 1

WONDERGLISS True cleanliness is meant to last ON THE SURFACE IT SEEMS TO BE A MIRACLE With Wondergliss, the cleaning of your ceramic sanitary ware becomes child s play. Due to this especially smooth surface coating, dirt and hard water desposits don t stand a chance they simply drip off with the water. And since there is no build-up of deposits, there is no more need for strong cleansing agents. THE GREATES EFFECT RESULTS FROM THE SMALLEST DETAIL Wondergliss owes is fabulous properties to very tiny particles so-called nanoparticles. Those tiny elements can be found between the atomic ceramic components and are responsible for the material s pore-free surface. Owing to this revolutionary development of the high-tech company NANOGATE, the few remaining deposits may simply be wiped away. GREAT SUCCESS DUE TO THE HIGH QUALITY The surface of Wondergliss ceramic sanitary ware by Laufen will stay shining and smooth for an especially long period of time. The secret for that lies in the furnace: The Wondergliss coating is not only applied to the surface but is also fired. This procedure secures an especially high level of quality and causes absolutely no damage to the environment. 2

COLOUR TABLE COLOURS 000 (200) White 018 (218) Bahamabeige 037 (237) Manhattan 046 (246) Whisperblue 049 (249) Pergamon 050 (250) Ägäis 757 (290) Edelweiss 927 (299) Graniti STUDIO LINE SET ALESSI 1) SET DESIGN 000 White SET MYLIFE 1) SET VIENNA SET GALLERY SET SWING COUNTERTOP BASINS DESIGN FIORA DUE GALLERY DUE OREGON SANO COUNTERTOP BASINS CUTABLE FIORA GALLERY PALACE / PALACE DUE VIENNA-VARIA 018 Bahamabeige 046 Whisperblue 050 Ägäis 037 Manhattan 049 Pergamon BUILT IN BASINS BIJOU BIROVA COMPAC CRISTAL FIORA LIPSY SAVOY 927 Graniti 757 Edelweiss DROP IN BASINS ALESSI 1) FIORA INDOVA LAURA MYLIFE 1) OBJECT 2) VIENNA 1) = only available in 200 White WonderGliss 2) = not available with WonderGliss WonderGliss is available on all studio line products. Please use the following numbers for your order: 200 White 218 Bahamabeige 237 Manhattan 246 Whisperblue 249 Pergamon 250 Ägäis 290 Edelweiss 299 Graniti

COLOUR TABLE COLOURS 000 (200) White 018 (218) Bahamabeige 037 (237) Manhattan 046 (246) Whisperblue 049 (249) Pergamon 050 (250) Ägäis 757 (290) Edelweiss 927 (299) Graniti SEMI RECESSED BASINS GALLERY OBJECT 2) SWING VIENNA 018 Bahamabeige 000 White WASHBASIN BOWLS ALESSI 1) MYLIFE 1) 037 Manhattan PROFESSIONAL LINE SET BATHLINE 2) SET DORADO 2) SET LIBERTYLINE 2) SET OBJECT 2) 1) 1) 1) 1) 046 Whisperblue 049 Pergamon ACCESSORIES UNIVERSAL 2) URINALS CAPRINO 2) CASA 2) COMO 2) KAPRUN 2) TAMARO 2) / TAMARO-S60 2) / TAMARO-S60B 2) / TAMARO-VS 2) TARO-NOVA 2) / TARO-UNI 2) RION 2) 050 Ägäis 927 Graniti 757 Edelweiss SPECIAL ARTICLES BAMBI 2) BERNINA 2) COLLEGE 2) REHAB 2) 1) = only available in 200 White WonderGliss 2) = not available with WonderGliss WonderGliss is available on all studio line products. Please use the following numbers for your order: 200 White 218 Bahamabeige 237 Manhattan 246 Whisperblue 249 Pergamon 250 Ägäis 290 Edelweiss 299 Graniti

SET ALESSI

SET ALESSI Washbasin 81097.1 Order no. 81097.1 Certified to DIN EN 32 Dimensions 520 x 525 mm Specification Charge 104 1 centre tap hole with integrated syphon cover Special specification Charge 109 without tap hole with integrated syphon cover 20,5 kg Mounting acc. incl. Mounting acc. excl. Charge 104 run off and overflow system Clou GEBERIT, order no. 89194.1 Charge 109 valve without overflow, order no. 89543.9 Special nut M10, order no. 89097.0 Stone screw fixing set M10 280 220 70 525 185 120 850 430 520 550 600 1.1

SET ALESSI Washbasin 81097.2 Order no. 81097.2 Certified to DIN EN 32 Dimensions 600 x 525 mm Specification Charge 104 1 centre tap hole with integrated syphon cover Special specification Charge 109 without tap hole with integrated syphon cover 25,5 kg Mounting acc. incl. Mounting acc. excl. Charge 104 run off and overflow system Clou GEBERIT, order no. 89194.1 Charge 109 valve without overflow, order no. 89543.9 Special nut M10, order no. 89097.0 Stone screw fixing set M10 280 220 70 185 525 120 850 430 600 550 600 1.2

SET ALESSI Washbasin 81197.1 Order no. 81197.1 Certified to DIN EN 32 Dimensions 520 x 530 mm Specification Charge 104 1 centre tap hole with integrated pedestal Special specification Charge 109 without tap hole with integrated pedestal 41,0 kg Mounting acc. incl. Charge 104 run off and overflow system Clou GEBERIT, order no. 89194.1 Charge 109 valve without overflow, order no. 89543.9 Fixing set, order no. 89175.7 ~250* 530 220 185 120 520 530 600 850 ~655* * = Determiner the exact dimension for the fixing set 89175.7 during the installation. 1.3

SET ALESSI Drop in basin 81397.1 Order no. 81397.1 Certified to DIN EN 32 Dimensions 500 x 500 mm Specification 1 centre tap hole 10,0 kg Mounting acc. incl. with concealed ceramic outlet and overflow, chrome-plated vertical cover, order no. 89097.8 Template, order no. 89197.3 Mounting acc. excl. Syphon D40 chrome order no. 89397.9 280 225 50 80 500 500 120/160* 530/560* 600/660* 900 * = Adhere to these dimensions if ALESSI-INDA furniture is being fitted. 1.4

SET ALESSI Mounting indication 3 2 1 matching for Drop in basin order no. 81397.1 DESCRIPTION 1. Vanity basin 2. Worktop 3. Silicon caoutchouc 1.5

SET ALESSI Washbasin bowl 81897.1 Order no. 81897.1 Certified to DIN EN 32 Dimensions 520 x 520 mm Specification Charge 104 1 centre tap hole Special specification Charge 109 without tap hole 12,5 kg Mounting acc. incl. Charge 104 run off and overflow system Clou GEBERIT, order no. 89194.1 Charge 109 valve without overflow, order no. 89543.9 Template, order no. 89197.8 Fixing set, order no. 89194.0 Mounting acc. excl. Syphon D40 chrome, order no. 89397.9 280 520 50 175 120/160* 530/560* 600/560* 900 520 * = Adhere to these dimensions if ALESSI-INDA furniture is being fitted. 1.6

SET ALESSI Fixing set 89194.0 4 1 3 2 5 6 7 Order no. 89194.0 matching for Washbasin bowl, order no. 81897.1 DESCRIPTION 1. Washbasin bowl 2. Worktop 3. Silicon caoutchouc 4. Plug 5. Washer 6. Hexagonal nut 7. Grubscrew 1.7

SET ALESSI Floorstanding WC combination 82297.6 Order no. 82297.6 Certified to EN 997 Specification Washdown for 6-l-flush Outlet horizontal VARIO, vertical 70-300 mm 36,0 kg Accessories excl. Cistern, order no. 82697.1 Seat and cover, order no. 89297.1 Mounting acc. incl. Device for fixing, order no. 89175.7 Mounting acc. excl. for horizontal outlet use commercial straight connection tubes for VARIO outlet 70-160 and 205 mm use GEBERIT-connection set, order no. 152.647 for VARIO outlet 220-300 mm use only LAUFEN-connection set, order no. 89902.5 370 160 100 720 390 890 950 465 185 415 45 260 70-300 1.8

SET ALESSI Cistern 82697.1 Order no. 82697.1 Certified to DIN 19542 matching for Floorstanding WC pan order no. 82297.6 Specification Dual-Flush (3/6-l-flush) water condensation insulation Water inlet rear 10,0 kg Mounting acc. included nten Mitt 340 370 160 100 425 485 1.9

SET ALESSI Floorstandimg WC pan 82197.1 Order no. 82197.1 Certified to DIN 19542 Specification Washdown for 6-l-flush Outlet horizontal vertical 70 and 125 mm 29,5 kg Accessories excl. Seat and cover, order no. 89297.1 Mounting acc. incl. Device for fixing, order no. 89175.7 Mounting acc. excl. for horizontal outlet use commercial straight connection tubes for outlet vertical 70 mm LAUFEN-connection set, order no. 89009.2 for outlet vertical 125 mm LAUFEN-connection set, order no. 89902.7 95 585 350 185 415 45 390 70 125 1.10

SET ALESSI Wallhung WC pan 82097.6 Order no. 82097.6 Certified to EN 997 Specification Washdown for 6-l-flush Outlet horizontal 24,5 kg Mounting acc. incl. Fixing set for wall LAUFEN, order no. 89097.1 Mounting acc. excl. commercial water outlet connection Stone screw fixing set 180 225 60 585 100 135 415 45 390 30 1.11

SET ALESSI Seat and cover 89297.1 Order no. 89297.1 matching for Floorstanding WC pan order no. 82297.6, 82197.1 Wallhung WC pan order no. 82097.6 Specification removable with automatic lowering system with ACTIVE SHIELD 2,8 kg Mounting acc. included nten Mitt 1.12

SET ALESSI Floorstanding bidet 83297.1 Order no. 83297.1 Specification 1 centre tap hole 22,0 kg Mounting acc. incl. Run off and overflow system Clou GEBERIT, order no. 89194.1 Device for fixing, order no. 89175.7 Mounting acc. excl. Syphon D40 chrome order no. 89394.9 585 120 250 415 390 150 225 1.13

SET ALESSI Wallhung bidet 83097.1 Order no. 83097.1 Specification 1 centre tap hole 18,5 kg Mounting acc. incl. Run off and overflow system Clou GEBERIT, order no. 89194.1 Fixing set for wall LAUFEN, order no. 89097.1 Mounting acc. excl. Syphon D40 chrome order no. 89394.9 Stone screw fixing set 180 120 215 325 250 60 415 585 390 120 225 1.14

SET ALESSI Syphonic urinal 84097.1 Order no. 84097.1 Certified to DIN 1390 Water inlet concealed Outlet horizontal Flushing quantity minimum 1 l Flushing capacity minimum 0,3 l/s 10,0 kg Accessories excl. Cover for urinal, order no. 89497.1 Mounting acc. incl. Fixing set for wall LAUFEN, order no. 89097.1 Mounting acc. excl. horizontal inlet connection GEBERIT, order no. 152.489 Syphon with horizontal outlet GEBERIT, order no. 152.939.11.1 Stone screw fixing set 325 290 520 130 200 295 100 585 420 395 60 650 1.15

SET ALESSI Cover for urinal 89497.1 Order no. 89497.1 matching for Syphonic urinal, order no. 84097.1 0,8 kg Mounting acc. included nten Mitt 1.16

SET DESIGN

SET DESIGN Washbasin 81154.0 Order no. 81154.0 Certified to DIN EN 32 Dimensions 700 x 645 mm Specification 1 centre tap hole anti-splash rim 22,0 kg Accessories excl. Syphon cover, order no. 81997.1 Pedestal, order no. 81954.0 Mounting acc. incl. Lateral cover, order no. 89653.9 Mounting acc. excl. Mounting set, order no. 89988.2 660 280 60 280 590 255 385 645 80-120 530 600 60 210 850 370 250 250 80-120 20 210 ~850* 530 600 700 360 * = Effective height must be fixed according to the height of the pedestal. 2.1

SET DESIGN Washbasin 81154.1 Order no. 81154.1 Certified to DIN EN 32 Dimensions 700 x 645 mm Specification 1 centre tap hole anti-splash rim with integrated towel rail left and right 22,0 kg Accessories excl. Syphon cover, order no. 81997.1 Pedestal, order no. 81954.0 Mounting acc. incl. Lateral cover, order no. 89653.9 Mounting acc. excl. Mounting set, order no. 89988.2 590 660 255 385 645 250 370 280 80-120 20 530 60 600 210 850 250 80-120 280 530 60 600 210 ~850* 700 770 360 * = Effective height must be fixed according to the height of the pedestal. 2.2

SET DESIGN Syphon cover 81997.1 Pedestal set 81954.0 / SYPHON COVER Order no. 81997.1 matching for Washbasins order no. 81154.0, 81154.1 14,5 kg Mounting acc. incl. Device for fixing, order no. 89460.5 / PEDESTAL SET Order no. 81954.0 matching for Washbasins order no. 81154.0, 81154.1 24,5 kg Mounting acc. included 2.3

SET DESIGN Countertop basin 81354.7 Order no. 81354.7 Certified to DIN EN 32 Dimensions 1040 x 585 mm Specification 1 centre tap hole anti-splash rim Special specification 3 tap holes 20,0 kg Accessories excl. Pedestal, order no. 81954.7 Mounting acc. excl. Mounting set, order no. 89988.2 280 50 280 50 180 1040 585 80-120 530 200 600 850 80-120 530 600 200 ~850* * = Effective height must be fixed according to the height of the pedestal. 2.4

SET DESIGN Pedestal 81954.7 Order no. 81954.7 matching for Washbasin order no. 81354.7 7,0 kg 2.5

SET DESIGN Small washbasin 81697.4 Order no. 81697.4 Certified to DIN EN 111 Dimensions 450 x 390 mm Specification 1 centre tap hole anti-splash rim 10,5 kg Accessories excl. Syphon cover, order no. 81997.5 Mounting acc. incl. Lateral cover, order no. 89653.9 Mounting acc. excl. Mounting set, order no. 89988.2 395 180 370 390 145 235 250 185 60 450 300 80-120 530 600 850 2.6

SET DESIGN Syphon cover 81997.5 Order no. 81997.5 matching for Small washbasin order no. 81697.4 3,0 kg Mounting acc. incl. Device for fixing, order no. 89460.7 2.7

SET DESIGN Floorstanding WC combination 82149.9 Order no. 82149.9 Certified to EN 997, EN 33 Specification Washdown for 6 l-flush Outlet horizontal VARIO, vertical 70-130 mm 23,5 kg Accessories excl. Cistern, order no. 82049.0, 82049.5 or 82749.0 Seat and cover, order no. 89141.0 Mounting acc. incl. Mounting set, order no. 89553.8 Lateral cover, order no. 89653.9 Mounting acc. excl. Special elbow for vertical connection 70-130 mm, order no. 89009.2 400 175 660 750 835 25 375 185 70-130 390 170 2.8

SET DESIGN Cistern 82049.0 / CISTERN Order no. 82049.0 Certified to DIN 19542 matching for Floorstanding WC pan order no. 82149.9 Specification Flushing mechanisme GEBERIT water condensation insulation Flush can be interrupted by pressing twice Water inlet rear 13,5 kg Mounting acc. excl. Corner valve for water inlet 400 175 335 420 2.9

SET DESIGN Cistern 82049.5 Order no. 82049.5 Certified to BS Standard matching for Floorstanding WC pan order no. 82149.9 Specification Flushing mechanisme DUDLEY water condensation insulation bottom water overflow Water inlet bottom 13,5 kg Mounting acc. incl. Water inlet flexibel host, order no. 89049.2 flexibel host for overflow tube, order no. 89049.1 Mounting acc. excl. Corner valve for water inlet 295 400 175 420 40 2.10

SET DESIGN Cistern 82749.0 Order no. 82749.0 matching for Floorstanding WC combination order no. 82149.9 Specification Flushing mechanisme DAL water condensation insulation Flush can be interrupted by pressing twice Water inlet rear 13,5 kg Mounting acc. excl. Corner valve for water inlet 400 175 335 420 2.11

SET DESIGN Floorstanding WC pan 82149.0 Order no. 82149.0 Certified to EN 997, EN 37 Specification Washdown for 6-l-flush Outlet horizontal vertical 70 mm 20,5 kg Accessories excl. Seat and cover, order no. 89141.0 Mounting acc. incl. Mounting set, order no. 89553.8 Lateral cover, order no. 89653.9 Mounting acc. excl. Special elbow for vertical connection 70 mm, order no. 89009.2 400 570 390 345 185 390 375 70 100 2.12

SET DESIGN Seat and cover 89141.0 Order no. 89141.0 matching for Floorstanding WC pan order no. 82149.9 or 82149.0 Specification Snap catch for easy removal 2,5 kg Mounting acc. incl. premounted on WC pan 2.13

SET DESIGN Floorstanding bidet 83149.1 Order no. 83149.1 Specification 1 centre tap hole anti-splash rim 21,0 kg Mounting acc. incl. Syphonfixing, order no. 89746.0 Mounting set, order no. 89553.8 Lateral cover, order no. 89653.9 Mounting acc. excl. Connection of mixer with the angle valves with standard hoses. Note the installation instruction of the hose supplier. 400 570 100 405 215 405 385 150 245 2.14

SET DESIGN Hook 87150.0 Order no. 87150.0 Dimensions 30 x 50 x 50 mm Specification Self adhesive fixing 0,6 kg TECHNICAL DRAWINGS / S 1 : 10 50 30 50 2.15

SET DESIGN Lamp 87162.0 Order no. 87162.0 Certified to CE Dimensions 660 x 120 mm 3,0 kg Accessories incl. Bulb Mounting acc. included TECHNICAL DRAWINGS / S 1 : 10 75 660 120 2.16

SET DESIGN Shelf 87154.6 Order no. 87154.6 Dimensions 660 x 140 mm 3,7 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 : 10 85 660 140 2.17

SET DESIGN Soap dish 87166.0 Order no. 87166.0 Dimensions 120 x 140 mm 0,9 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 : 10 140 85 120 140 2.18

SET DESIGN Glass holder 87167.0 Order no. 87167.0 Dimensions 120 x 140 mm 0,9 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 : 10 140 85 140 120 2.19

SET DESIGN Towel rail 87156.0 Order no. 87156.0 Dimensions 98 x 470 x 110 mm 0,35 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 : 10 45 415 45 110 25 98 55 470 2.20

SET DESIGN Towel rail 87158.0 Order no. 87158.0 Dimensions 600 x 85 x 140 mm 3,5 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 : 10 140 600 85 2.21

SET DESIGN Toilet roll holder 87161.0 Order no. 87161.0 Dimensions 185 x 140 mm 1,7 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 : 10 70 63 145 33 120 185 140 2.22

SET DESIGN Toilet brush holder 87168.0 Order no. 87168.0 Dimensions 140 x 140 mm 2,3 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 : 10 275 240 140 140 35 2.23

SET MYLIFE

SET MYLIFE Washbasin 81094.6 Order no. 81094.6 Certified to DIN EN 32 Dimensions 750 x 530 mm Specification Charge 104 1 centre tap hole Special specification Charge 108 3 tap holes Charge 109 without tap hole 15,5 kg Accessories excl. Syphon cover, order no. 81994.1 Pedestal, order no. 81994.0 Mounting acc. incl. Mounting acc. excl. Charge 104 and 108 run off and overflow system Clou GEBERIT, order no. 89194.1 Charge 109 valve without overflow, order no. 89543.9 Mounting set, order no.89988.2 280 280 250 150 530 150 50 50 120 850 120 ~850* 750 530 600 530 600 * = Effective height must be fixed according to the height of the pedestal. 3.1

SET MYLIFE Washbasin 81094.7 Order no. 81094.7 Certified to DIN EN 32 Dimensions 950 x 600 mm Specification Charge 104 1 centre tap hole Special specification Charge 108 3 tap holes Charge 109 without tap hole 23,0 kg Accessories excl. Syphon cover, order no. 81994.1 Pedestal, order no. 81994.0 Mounting acc. incl. Mounting acc. excl. Charge 104 and 108 run off and overflow system Clou GEBERIT, order no. 89194.1 Charge 109 valve without overflow, order no. 89543.9 Mounting set, order no.89988.2 280 280 260 150 150 600 50 50 120 600 530 850 120 530 600 ~850* 950 * = Effective height must be fixed according to the height of the pedestal. 3.2

SET MYLIFE Syphon cover 81994.1 Pedestal 81994.0 / SYPHON COVER Order no. 81994.1 matching for Washbasins order no. 81094.6, 81094.7 9,5 kg Mounting acc. incl. Device for fixing, order no. 89001.0 / PEDESTAL Order no. 81994.0 matching for Washbasins order no. 81094.6, 81094.7 11,5 kg Mounting acc. incl. Device for fixing, order no. 89175.5 3.3

SET MYLIFE Drop in basin 81194.6 Order no. 81194.6 Dimensions 750 x 480 mm Specification Charge 104 1 centre tap hole Special specification Charge 109 without tap hole 13,5 kg Mounting acc. incl. Charge 104 run off and overflow system Clou GEBERIT, order no. 89194.1 Charge 109 valve without overflow, order no. 89543.9 Template, order no. 89794.6 Mounting acc. excl. Mounting set, order no. 89909.0 215 145 480 850 530 30 120 600 750 3.4

SET MYLIFE Fixing set 89909.0 1 6 2 3 4 5 Order no. 89909.0 matching for Drop in basin, order no. 81194.6 DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Adjusting screw 5. Hexagonal screw with plug 6. Silicon caoutchouc 3.5

SET MYLIFE Washbasin bowl 81894.4 Order no. 81894.4 Dimensions 650 x 440 mm Specification Charge 104 1 centre tap hole Special specification Charge 109 without tap hole 13,0 kg Mounting acc. incl. Charge 104 run off and overflow system Clou GEBERIT, order no. 89194.1 Charge 109 valve without overflow, order no. 89543.9 Template, order no. 89794.4 Mounting set, order no. 89194.0 225 440 530 600 140 160 120 885 650 3.6

SET MYLIFE Fixing set 89194.0 4 1 3 2 5 6 7 Order no. 89194.0 matching for Washbasin bowl, order no. 81894.4 DESCRIPTION 1. Washbasin bowl 2. Worktop 3. Silicon caoutchouc 4. Plug 5. Washer 6. Hexagonal nut 7. Grubscrew 3.7

SET MYLIFE Floorstanding WC combination 82294.3 Order no. 82294.3 Certified to EN 997, EN 33 Specification Washdown for 6-l-flush Outlet horizontal VARIO, vertical 70-300 mm 33,0 kg Accessories Cistern, order no. 82694.1 Seat and cover, order no. 89294.1 Mounting acc. incl. Device for fixing, order no. 89175.7 Mounting acc. excl. for VARIO-outlet 70-220 mm LAUFENconnection, order no. 89009.2 for VARIO-outlet 220-300 mm only LAUFENconnection, order no. 89902.5 415 160 100 720 390 875 960 185 400 25 260 70-300 3.8

SET MYLIFE Cistern 82694.1 Order no. 82694.1 Certified to DIN 19542 matching for Floorstanding WC pan order no. 82294.3 Specification Flushing mechanisme GEBERIT water condensation insulation Dual-Flush (3/6-l-flush) Water inlet rear 10,0 kg Mounting acc. included hinten Mitt 330 415 160 100 450 535 510 3.9

SET MYLIFE Wallhung WC pan 82094.6 Order no. 82094.6 Certified to EN 997, EN 38 Specification Washdown for 6-l-flush Outlet horizontal 26,0 kg Accessories excl. Seat and cover, order no. 89294.1 180 40 225 55 610 100 135 400 25 390 30 3.10

SET MYLIFE Seat and cover 89294.1 Order no. 89294.1 matching for Floorstanding WC pan order no. 82294.3 Wallhung WC pan order no. 82094.6, Mounting acc. included hinten Mitt Specification Snap catch for easy removal with automatic lowering system 3.11

SET MYLIFE Floorstanding bidet 83294.1 Order no. 83294.1 Specification 1 centre tap hole Special specification 3 tap holes 22,5 kg Accessories excl. Bidet seat, order no. 89394.1 Mounting acc. incl. Run off and overflow system Clou GEBERIT, order no. 89194.1 Device for fixing, order no. 89175.7 Mounting acc. excl. Syphon LAUFEN, order no. 89394.9 50 610 120 240 400 35 390 150 315 3.12

SET MYLIFE Wallhung bidet 83094.1 Order no. 83094.1 Specification 1 centre tap hole 18,5 kg Accessories excl. Bidet seat, order no. 89394.1 Mounting acc. incl. Run off and overflow system Clou GEBERIT, order no. 89194.1 180 40 610 120 215 325 240 55 400 35 390 120 265 3.13

SET MYLIFE Bidet seat 89394.1 Order no. 89394.1 matching for Floorstanding bidet order no. 83294.1 Wallhung bidet order no. 83094.1 Specification Snap catch for easy removal 1,0 kg Mounting acc. included 3.14

SET VIENNA

SET VIENNA Washbasin 81003.4 Order no. 81003.4 Certified to DIN EN 32 Dimensions 600 x 460 mm Specification 1 centre tap hole Special specification 3 tap holes 14,0 kg Accessories excl. Syphon cover, order no. 81903.1 Pedestal, order no. 81903.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 220 220 220 50 50 600 460 80-120 530 600 850 80-120 530 600 ~845* * = Effective height must be fixed according to the height of the pedestal. 4.1

SET VIENNA Washbasin 81003.5 Order no. 81003.5 Certified to DIN EN 32 Dimensions 650 x 550 mm Specification 1 centre tap hole Special specification 3 tap holes 16,5 kg Accessories excl. Syphon cover, order no. 81903.1 Pedestal, order no. 81903.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 550 220 220 220 50 50 650 80-120 530 600 850 80-120 530 600 ~845* * = Effective height must be fixed according to the height of the pedestal. 4.2

SET VIENNA Washbasin 81003.7 Order no. 81003.7 Certified to DIN EN 32 Dimensions 700 x 555 mm Specification 1 centre tap hole Special specification 3 tap holes 18,0 kg Accessories excl. Syphon cover, order no. 81903.1 Pedestal, order no. 81903.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 700 220 555 80-120 530 50 220 600 850 80-120 50 530 220 600 ~840* * = Effective height must be fixed according to the height of the pedestal. 4.3

SET VIENNA Washbasin 81003.8 Order no. 81003.8 Certified to DIN EN 32 Dimensions 800 x 565 mm Specification 1 centre tap hole Special specification 3 tap holes 19,5 kg Accessories excl. Syphon cover, order no. 81903.1 Pedestal, order no. 81903.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 220 220 220 50 50 565 80-120 850 80-120 ~850* 800 530 600 530 600 * = Effective height must be fixed according to the height of the pedestal. 4.4

SET VIENNA Syphon cover 81903.1 Pedestal 81903.0 / SYPHON COVER Order no. 81903.1 matching for Washbasins order no. 81003.4, 81003.5, 81003.7, 81003.8 6,0 kg Mounting acc. incl. Device for fixing, order no. 89001.0 / PEDESTAL Order no. 81903.0 matching for Washbasins order no. 81003.4, 81003.5, 81003.7, 81003.8 7,0 kg 4.5

SET VIENNA Countertop basin / cutable VARIA 81347.8 Order no. 81347.8 Certified to DIN EN 32 Dimensions 800 x 480 mm Specification 1 centre tap hole cutable to 650 mm, with 2 side cover to 680 mm Special specification 3 tap holes 13,5 kg Accessories excl. Syphon cover, order no. 81947.1 Accessories excl. Side cover for cut surface left, order no. 87340.3 right, order no. 87340.4 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 650* 280 200 480 300 190 45 50 300 80-120 850 800 max.775 530 600 max.295 * = minimum measure for cutting 4.6

SET VIENNA Syphon cover 81947.1 Order no. 81947.1 matching for Washbasin order no. 81347.8 9,0 kg Mounting acc. incl. Device for fixing, order no. 89175.5 4.7

SET VIENNA Countertop basin / cutable VARIA 81347.9 Order no. 81347.9 Certified to DIN EN 32 Dimensions 1000 x 550 mm Specification 1 centre tap hole cutable to 800 mm, with 2 side cover to 830 mm Special specification 3 tap holes 19,0 kg Accessories excl. Syphon cover, order no. 81947.9 Accessories excl. Side cover for cut surface left, order no. 87340.3 right, order no. 87340.4 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 800* 280 215 300 225 45 550 50 80-120 850 300 1000 max.975 530 600 max.295 * = minimum measure for cutting 4.8

SET VIENNA Syphon cover 81947.9 Order no. 81947.9 matching for Washbasin order no. 81347.9 9,0 kg Mounting acc. incl. Device for fixing, order no. 89175.5 4.9

SET VIENNA Countertop double basin / cutable VARIA DUE 81341.9 Order no. 81341.9 Certified to DIN EN 32 Dimensions 1300 x 500 mm Specification per basin 1 centre tap hole cutable to 1150 mm, with 2 side cover to 1180 mm Special specification per basin 3 tap holes 26,6 kg Accessories excl. Side cover for cut surface left, order no. 87340.3 right, order no. 87340.4 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 1150* 855 570 455 200 300 180 45 50 1300 500 80-120 570 max.1275 530 600 850 300 max.295 * = minimum measure for cutting 4.10

SET VIENNA Side cover left 87340.3 Side cover right 87340.4 / SIDE COVER LEFT Order no. 87340.3 matching for Washbasins order no. 81341.9, 81347.8, 81347.9 0,3 kg Otherwise factory fitted end pieces / SIDE COVER RIGHT Order no. 87340.4 matching for Washbasins order no. 81341.9, 81347.8, 81347.9 0,3 kg Otherwise factory fitted end pieces 4.11

SET VIENNA Drop in basin 81141.1 Order no. 81141.1 Dimensions 555 x 430 mm Specification 1 centre tap hole Special specification 3 tap holes 7,2 kg Mounting acc. incl. Template, order no. 89744.7 Mounting acc. excl. Mounting set, order no. 89909.0 555 180 430 80-120 530 600 165 15 850 4.12

SET VIENNA Drop in basin 81141.2 Order no. 81141.2 Dimensions 630 x 510 mm Specification 1 centre tap hole Special specification 3 tap holes 10,0 kg Mounting acc. incl. Template, order no. 89744.8 Mounting acc. excl. Mounting set, order no. 89909.0 510 210 180 20 80-120 850 630 530 600 4.13

SET VIENNA Semi recessed basin 81140.3 Order no. 81140.3 Dimensions 555 x 455 mm Specification 1 centre tap hole Special specification 3 tap holes 10,0 kg Mounting acc. incl. Template, order no. 89140.3 Mounting set, order no. 89909.0 180 25 255 455 850 25 80-120 175 20 255 850 555 530 600 4.14

SET VIENNA Semi recessed basin 81140.5 Order no. 81140.5 Dimensions 650 x 540 mm Specification 1 centre tap hole Special specification 3 tap holes 12,0 kg Mounting acc. incl. Template, order no. 89140.5 Mounting set, order no. 89909.0 25 25 200 80-120 20 280 530 600 850 210 850 280 540 650 4.15

SET VIENNA Fixing set 89909.0 1 6 2 3 4 5 Order no. 89909.0 matching for Drop in basins order no. 81141.1, 81141.2 Semi recessed basins order no. 81140.3, 81140.5 DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Adjusting screw 5. Hexagonal screw with plug 6. Silicon caoutchouc 4.16

SET VIENNA Small washbasin 81530.4 Order no. 81530.4 Certified to DIN EN 111 Dimensions 500 x 350 mm Specification 1 centre tap hole 7,0 kg Accessories excl. Syphon cover, order no. 81903.3 Mounting acc. excl. Mounting set, order no. 89988.2 280 35 500 160 350 80-120 580 155 650 850 4.17

SET VIENNA Syphon cover 81903.3 Order no. 81903.3 matching for Small washbasin order no. 81530.4 5,5 kg Mounting acc. incl. Device for fixing, order no. 89001.0 4.18

SET VIENNA Floorstanding WC combination 82159.9 Order no. 82159.9 Certified to EN 997, EN 33 Specification Washdown for 6-l-flush Outlet horizontal VARIO, vertical 70-300 mm 30,0 kg Accessories excl. Cistern, order no. 82647.0, 82759.0, 82759.3 Seat and cover, order no. 89247.0 Mounting acc. excl. for VARIO-outlet 70-220 mm LAUFENconnection, order no. 89009.2 for VARIO-outlet 220-300 mm only LAUFENconnection, order no. 89902.5 390 185 700 750 845 390 50 360 180 260 70-300 4.19

SET VIENNA Floorstanding WC combination COMFORT 82045.9 Order no. 82045.9 Certified to EN 997, EN 33 Specification Washdown for 6-l-flush Outlet horizontal VARIO, vertical 70-300 mm 30,0 kg Accessories excl. Cistern, order no. 82647.0, 82759.0, 82759.3 Seat and cover, order no. 89247.0 Mounting acc. incl. Device for fixing, order no. 89175.5 Mounting acc. excl. for VARIO-outlet 70-220 mm LAUFENconnection, order no. 89009.2 for VARIO-outlet 220-300 mm only LAUFENconnection, order no. 89902.5 390 185 700 825 905 450 50 360 185 260 70-300 4.20

SET VIENNA Cistern 82647.0 Order no. 82647.0 Certified to DIN 19542 matching for Floorstanding WC pan order no. 82045.9, 82159.9 Specification Flushing mechanisme GEBERIT water condensation insulation Dual-Flush (3/6-l-flush) Water inlet side or rear 12,5 kg Mounting acc. excl. Corner valve for water inlet 390 185 325 405 325 60 4.21

SET VIENNA Cistern 82759.0 Order no. 82759.0 Certified to DIN 19542 matching for Floorstanding WC pan order no. 82045.9, 82159.9 Specification Flushing mechanisme DAL water condensation insulation Flush can be interrupted by pressing twice Water inlet side or rear 12,5 kg Mounting acc. excl. Corner valve for water inlet 390 185 325 405 325 60 4.22

SET VIENNA Cistern 82759.3 Order no. 82759.3 Certified to DIN 19542 matching for Floorstanding WC pan order no. 82045.9, 82159.9 Specification Flushing mechanisme DAL Flush can be interrupted by pressing twice Water inlet bottom 12,5 kg Mounting acc. excl. Corner valve for water inlet 120 390 185 405 40 4.23

SET VIENNA Floorstanding WC pan 82156.1 Order no. 82156.1 Certified to EN 997, EN 37 Specification Washdown for 6-l-flush Outlet horizontal vertical 20,5 kg Accessories excl. Seat and cover, order no. 89247.0 Mounting acc. excl. for horizontal outlet use standard variable connection for outlet vertical LAUFEN-connection, order no. 89009.2 65 570 350 190 390 50 360 70 125 4.24

SET VIENNA Wallhung WC pan 82158.0 Order no. 82158.0 Certified to EN 997, EN 38 Specification Washdown for 6-l-flush 17,0 kg Accessories excl. Seat and cover, order no. 89247.0 180 40 225 65 570 100 135 400 50 360 20 4.25

SET VIENNA Wallhung WC pan COMFORT 82347.0 Order no. 82347.0 Certified to EN 997, EN 38 Specification Washdown for 6-l-flush 17,0 kg Accessories excl. Seat and cover, order no. 89247.0 180 40 570 100 225 135 90 450 50 360 20 4.26

SET VIENNA Seat and cover 89247.0 Order no. 89247.0 matching for Floorstanding WC pan order no. 82045.9, 82156.1, 82159.9 Wallhung WC pan order no. 82158.0, 82347.0 Specification Snap catch for easy removal 4,0 kg Mounting acc. included 4.27

SET VIENNA Floorstanding bidet 83059.1 Order no. 83059.1 Specification 1 centre tap hole 17,0 kg 50 100 180 570 390 5 360 150 270 4.28

SET VIENNA Floorstanding bidet COMFORT 83047.1 Order no. 83047.1 Specification 1 centre tap hole 19,0 kg Mounting acc. incl. Device for fixing, order no. 89175.5 50 100 270 570 480 360 150 270 4.29

SET VIENNA Wallhung bidet 83159.1 Order no. 83159.1 Specification 1 centre tap hole 15,5 kg 180 40 570 100 120 325 210 65 450 360 300 45 225 4.30

SET VIENNA Wallhung bidet COMFORT 83147.1 Order no. 83147.1 Specification 1 centre tap hole 17,5 kg 180 40 570 100 120 325 290 90 500 7 360 150*/300** 225 * = corner valve inside / ** = corner valve outside 4.31

SET GALLERY

SET GALLERY Washbasin 81017.1 Order no. 81017.1 Certified to DIN EN 32 Dimensions 550 x 460 mm Specification 1 centre tap hole 12,0 kg Accessories excl. Syphon cover, order no. 81917.2 Pedestal, order no. 81917.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 50 280 460 225 160 160 50 550 80-120 530 600 850 80-120 530 600 ~810* * = Effective height must be fixed according to the height of the pedestal. 5.1

SET GALLERY Washbasin 81017.2 Order no. 81017.2 Certified to DIN EN 32 Dimensions 600 x 500 mm Specification 1 centre tap hole 15,0 kg Accessories excl. Syphon cover, order no. 81917.2 Pedestal, order no. 81917.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 500 245 180 180 50 50 80-120 850 80-120 ~830* 600 530 600 530 600 * = Effective height must be fixed according to the height of the pedestal. 5.2

SET GALLERY Washbasin 81017.4 Order no. 81017.4 Certified to DIN EN 32 Dimensions 650 x 530 mm Specification 1 centre tap hole 16,5 kg Accessories excl. Syphon cover, order no. 81917.2 Pedestal, order no. 81917.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 650 245 530 80-120 530 50 190 600 850 80-120 50 530 190 600 ~840* * = Effective height must be fixed according to the height of the pedestal. 5.3

SET GALLERY Washbasin 81017.5 Order no. 81017.5 Certified to DIN EN 32 Dimensions 700 x 550 mm Specification 1 centre tap hole Special specification 3 tap holes 18,0 kg Accessories excl. Syphon cover, order no. 81917.2 Pedestal, order no. 81917.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 550 245 200 200 50 50 80-120 850 80-120 ~850* 700 530 600 530 600 * = Effective height must be fixed according to the height of the pedestal. 5.4

SET GALLERY Washbasin for corner 81416.5 Order no. 81416.5 Certified to DIN EN 32 Dimensions 725 x 655 mm Specification 1 centre tap hole 12,5 kg Mounting acc. excl. Mounting set, order no. 89988.2 280 515 280 275 850 655 190 45 275 80-120 530 600 600 725 5.5

SET GALLERY Countertop basin / cutable 81417.6 Order no. 81417.6 Certified to DIN EN 32 Dimensions 1020 x 520 mm Specification 1 centre tap hole cutable Special options 3 tap holes 18,0 kg Accessories excl. Syphon cover, order no. 81917.2 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 630* 280 240 390 520 190 50 45 355 80-120 850 600 max.990 530 600 max.345 1020 * = minimum measure for cutting 5.6

SET GALLERY Countertop double basin 81417.8 Order no. 81417.8 Certified to DIN EN 32 Dimensions 1350 x 520 mm Specification per basin 1 centre tap hole Special specification per basin 3 tap holes 30,5 kg Accessories excl. Syphon cover, order no. 81917.2 Mounting acc. excl. Mounting set, order no. 89988.2 640 855 50 455 45 240 390 520 80-120 190 355 640 850 600 1350 max.1320 530 600 max.345 5.7

SET GALLERY Syphon cover 81917.2 Pedestal 81917.0 / SYPHON COVER Order no. 81917.2 matching for Washbasins order no. 81017.1, 81017.2, 81017.4, 81017.5, 81417.6, 81417.8 6,5 kg Mounting acc. incl. Device for fixing, order no. 89001.2 / PEDESTAL Order no. 81917.0 matching for Washbasins order no. 81017.1, 81017.2, 81017.4, 81017.5 7,0 kg 5.8

SET GALLERY Semi recessed basin 81317.4 Order no. 81317.4 Dimensions 650 x 530 mm Specification 1 centre tap hole Special specification 3 tap holes 14,5 kg Mounting acc. incl. Template, order no. 89140.5 Mounting set, order no. 89909.0 280 195 20 530 195 20 260 80-120 850 650 530 600 5.9

SET GALLERY Fixing set 89909.0 1 6 2 3 4 5 Order no. 89909.0 matching for Semi recessed basin order no. 81317.4 DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Adjusting screw 5. Hexagonal screw with plug 6. Silicon caoutchouc 5.10

SET GALLERY Small washbasin 81517.2 Order no. 81517.2 Certified to DIN EN 111 Dimensions 470 x 380 mm Specification 1 centre tap hole 8,5 kg Accessories excl. Syphon cover, order no. 81917.5 Mounting acc. excl. Mounting set, order no. 89988.2 180 45 380 190 155 80 470 580 650 850 5.11

SET GALLERY Syphon cover 81917.5 Order no. 81917.5 matching for Small washbasin order no. 81517.2 5,0 kg Mounting acc. incl. Device for fixing, order no. 89001.0 5.12

SET GALLERY Small washbasin for corner 81616.5 Order no. 81616.5 Certified to DIN EN 32 Dimensions 490 x 470 mm Specification 1 centre tap hole 9,4 kg Mounting acc. excl. Mounting set, order no. 89988.2 350 180 195 40 180 470 155 470 850 195 80-120 580 650 490 5.13

SET GALLERY Floorstanding WC combination 82117.9 Order no. 82117.9 Certified to EN 997, EN 33 Specification Washdown for 6-l-flush Outlet horizontal VARIO vertical 70-300 cm 24,0 kg Accessories excl. Cistern, order no. 82717.0 Seat and cover, order no. 89517.1 Mounting acc. excl. for VARIO-outlet 70-220 mm LAUFENconnection, order no. 89009.2 for VARIO-outlet 220-300 mm only LAUFENconnection, order no. 89902.5 390 185 400 720 750 825 15 360 185 260 70-300 5.14

SET GALLERY Cistern 82717.0 Order no. 82717.0 Certified to DIN 19542 matching for Floorstanding WC pan order no. 82117.9 Wallhung WC pan order no. 82007.1 Specification Flushing mechanisme GEBERIT water condensation insulation Dual-Flush (3/6-l-flush) Water inlet side or rear 12,5 kg Mounting acc. excl. Corner valve for water inlet 390 185 335 410 315 90 5.15

SET GALLERY Floorstanding WC pan 82417.1 Order no. 82417.1 Certified to EN 997, EN 37 Specification Washdown for 6-l-flush Outlet horizontal vertical 70 mm 17,5 kg Accessories excl. Seat and cover, order no. 89517.1 Mounting acc. excl. Special elbow for vertical connection 70 mm, order no. 89009.2 95 580 400 350 185 360 70 125 5.16

SET GALLERY Wallhung WC combination 82007.1 Order no. 82007.1 Certified to EN 997, EN 34 Specification Washdown for 6-l-flush 24,0 kg Accessories excl. Cistern, order no. 82717.0 Seat and cover, order no. 89517.1 390 185 700 180 40 750 825 15 360 225 100 400 55 100 5.17

SET GALLERY Wallhung WC pan 82017.0 Order no. 82017.0 Certified to EN 997, EN 38 Specification Washdown for 6-l-flush 16,0 kg Accessories excl. Seat and cover, order no. 89517.1 180 40 550 100 225 135 60 400 360 20 5.18

SET GALLERY Seat and cover 89517.1 Order no. 89517.1 matching for Floorstanding WC pan order no. 82117.9, 82417.1 Wallhung WC pan order no. 82007.1, 82017.0 Specification removable 2,5 kg Mounting set included 5.19

SET GALLERY Floorstanding bidet 83117.1 Order no. 83117.1 Specification 1 centre tap hole 18,0 kg 50 580 400 210 360 150 100 280 5.20

SET GALLERY Wallhung bidet 83017.1 Order no. 83017.1 Specification 1 centre tap hole 15,0 kg 180 40 325 205 400 550 360 300 100 120 60 230 5.21

SET SWING

SET SWING Washbasin 81040.1 Order no. 81040.1 Certified to DIN EN 32 Dimensions 540 x 430 mm Specification 1 centre tap hole Special specification 3 tap holes 11,0 kg Accessories excl. Syphon cover, order no. 81950.3 Pedestal, order no. 81940.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 430 185 185 185 60 60 540 80 530 600 850 80-120 530 600 ~830* * = Effective height must be fixed according to the height of the pedestal. 6.1

SET SWING Syphon cover 81950.3 Pedestal 81940.0 / SYPHON COVER Order no. 81950.3 matching for Washbasin order no. 81040.1 5,0 kg Mounting acc. incl. Device for fixing, order no. 89001.0 / PEDESTAL Order no. 81940.0 matching for Washbasins order no. 81040.1, 81040.2, 81040.4 6,5 kg 6.2

SET SWING Washbasin 81040.2 Order no. 81040.2 Certified to DIN EN 32 Dimensions 620 x 510 mm Specification 1 centre tap hole Special specification 3 tap holes 15,0 kg Accessories excl. Syphon cover, order no. 81950.1 Pedestal, order no. 81940.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 510 220 195 195 60 60 80 850 80-120 ~845* 620 530 600 530 600 * = Effective height must be fixed according to the height of the pedestal. 6.3

SET SWING Washbasin 81040.4 Order no. 81040.4 Certified to DIN EN 32 Dimensions 660 x 560 mm Specification 1 centre tap hole Special specification 3 tap holes 18,0 kg Accessories excl. Syphon cover, order no. 81950.1 Pedestal, order no. 81940.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 230 560 210 210 60 60 80 850 80-120 ~860* 660 530 600 530 600 * = Effective height must be fixed according to the height of the pedestal. 6.4

SET SWING Syphon cover 81950.1 Pedestal 81940.0 / SYPHON COVER Order no. 81950.1 matching for Washbasins order no. 81040.2, 81040.4 6,0 kg Mounting acc. incl. Device for fixing, order no. 89001.0 / PEDESTAL Order no. 81940.0 matching for Washbasins order no. 81040.1, 81040.2, 81040.4 6,5 kg 6.5

SET SWING Semi recessed basin 81041.1 Order no. 81041.1 Dimensions 555 x 460 mm Specification 1 centre tap hole Special specification 3 tap holes 10,0 kg Mounting acc. incl. Template, order no. 89140.1 Mounting set, order no. 89060.2 260 180 200 25 555 460 80-120 530 600 850 20 240 6.6

SET SWING Fixing set 89060.2 4 2 3 1 Order no. 89060.2 matching for Semi recessed basins order no. 81041.1 DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Silicon caoutchouc 6.7

SET SWING Semi recessed basin 81240.4 Order no. 81240.4 Dimensions 655 x 555 mm Specification 1 centre tap hole Special specification 3 tap holes 12,0 kg Mounting acc. incl. Template, order no. 89140.5 Mounting set, order no. 89909.0 280 195 555 210 25 80-120 850 25 255 655 530 600 6.8

SET SWING Fixing set 89909.0 1 6 2 3 4 5 Order no. 89909.0 matching for Semi recessed basin order no. 81240.4 DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Adjusting screw 5. Hexagonal screw with plug 6. Silicon caoutchouc 6.9

SET SWING Small washbasin 81540.0 Order no. 81540.0 Certified to DIN EN 111 Dimensions 480 x 360 mm Specification 1 centre tap hole 8,0 kg Accessories excl. Syphon cover, order no. 81950.5 Mounting acc. excl. Mounting set, order no. 89988.2 200 165 360 165 50 480 80 580 650 850 6.10

SET SWING Syphon cover 81950.5 Order no. 81950.5 matching for Small washbasin order no. 81540.0 5,0 kg Mounting acc. incl. Device for fixing, order no. 89001.0 6.11

SET SWING Floorstanding WC combination 82340.1 Order no. 82340.1 Certified to EN 977, EN 33 Specification Washdown for 6-l-flush Outlet horizontal VARIO, vertical 70-300 mm 12,0 kg Accessories excl. Cistern, order no. 82740.0, 82740.3, 82840.0 Seat and cover, order no. 89340.0 Mounting acc. excl. for VARIO-outlet 70-220 mm LAUFENconnection, order no. 89009.2 for VARIO-outlet 220-300 mm only LAUFENconnection, order no. 89902.5 375 195 710 750 800 390 20 360 180 260 70-300 6.12

SET SWING Cistern 82740.0 Order no. 82740.0 Certified to DIN 19542 matching for Floorstanding WC pan order no. 82340.1 Wallhung WC pan order no. 82140.1 Specification Flushing mechanisme DAL water condensation insulation Flush can be interrupted by pressing twice Water inlet side or rear 16,0 kg Mounting acc. excl. Corner valve for water inlet 375 195 280 390 320 80 6.13

SET SWING Cistern 82740.3 Order no. 82740.3 Certified to DIN 19542 matching for Floorstanding WC pan order no. 82340.1 Specification Flushing mechanisme DAL Flush can be interrupted by pressing twice Water inlet bottom 16,0 kg 87,5 375 195 395 35 6.14

SET SWING Cistern 82840.0 Order no. 82840.0 Certified to DIN 19542 matching for Floorstanding WC pan order no. 82340.1 Wallhung WC pan order no. 82140.1 Specification Flushing mechanisme GEBERIT water condensation insulation Dual-Flush (3/6-l-flush) Water inlet side or rear 16,0 kg Mounting acc. excl. Corner valve for water inlet 375 195 280 390 320 80 6.15

SET SWING Floorstanding WC 82341.1 Order no. 82341.1 Certified to EN 977, EN 37 Specification Washdown for 6-l-flush Outlet horizontal vertical 70 mm 17,5 kg Accessories excl. Seat and cover, order no. 89340.0 Mounting acc. excl. for horizontal outlet use standard variable connection for outlet vertical 70 mm LAUFEN-connection, order no. 89009.2 95 580 395 350 185 360 70 125 6.16

SET SWING Wallhung WC combination 82140.1 Order no. 82140.1 Certified to EN 977, EN 34 Specification Washdown for 6-l-flush 20,0 kg Accessories excl. Cistern, order no. 82740.0 82840.0 Seat and cover, order no. 89340.0 375 195 40 690 180 100 750 820 400 30 360 225 50 25 6.17

SET SWING Wallhung WC pan 82040.5 Order no. 82040.5 Certified to EN 977, EN 38 Specification Washdown for 6-l-flush 14,0 kg Accessories excl. Seat and cover, order no. 89340.0 Mounting acc. excl. Water outlet and inlet connection Bolt caps chrome, order no. 89263.0 Steel support, order no. 89900.0 Steel support, UK-Version, order no. 89900.1 Kombifix LIV, order no. 89380.0 Cover plate Kombifix, order no. 89380.4 180 540 100 40 225 135 15 60 400 360 20 6.18

SET SWING Seat and cover 89340.0 Order no. 89340.0 matching for Floorstanding WC pan order no. 82340.1, 82341.1 Wallhung WC pan order no. 82140.1, 82040.5 Specification removable 2,8 kg Mounting set included 6.19

SET SWING Floorstanding bidet 83340.1 Order no. 83340.1 Specification 1 centre tap hole 19,0 kg 50 580 100 395 200 360 150 255 6.20

SET SWING Floorstanding bidet 83340.3 Order no. 83340.3 Specification 3 tap holes 19,0 kg 50 580 100 395 200 360 150 255 6.21

SET SWING Wallhung bidet 83140.1 Order no. 83140.1 Specification 1 centre tap hole 15,0 kg Mounting acc. excl. Steel support, order no. 89900.0 Steel support, UK-Version, order no. 89900.1 Bolt caps, order no. 89263.1 180 40 540 100 120 325 205 55 400 15 360 300 200 6.22

SET LIBERTYLINE

SPECIAL ARTICLES Washbasin for handicapped LIBERTYLINE 81147.8 Order no. 81147.8 Certified to DIN 18024/18025, EN 32 Dimensions 800 x 550 mm Specification 1 centre tap hole without overflow Special specification without tap hole 16,0 kg Mounting acc. excl. Run off and overflow system Clou GEBERIT, order no. 89194.1 Mounting set, order no. 89988.2 280 190 140 50 550 190 800 300 600 630* 830 * = 550 mm by using run off and overflow system Clou 8.1

SPECIAL ARTICLES Wallhung WC pan for handicapped LIBERTYLINE 82147.0 Order no. 82147.0 Certified to DIN 18024/18025, EN 997, EN 38 Specification Washdown for 6-l-flush, lenght 700 mm 23,5 kg Accessories excl. WC seat and cover, order no. 89247.0 WC seat, order no. 89147.0 Mounting acc. excl. Water outlet and inlet connection Bolt caps chrome, order no. 89263.0 Steel support, order no. 89900.0 Steel support, UK-Version, order no. 89900.1 Kombifix LIV, order no. 89380.0 Cover plate Kombifix, order no. 89380.4 180 40 700 100 225 135 90 450 50 360 90 8.2

SPECIAL ARTICLES Seat and cover LIBERTYLINE 89247.0 Seat LIBERTYLINE 89147.0 / SEAT AND COVER Order no. 89247.0 matching for Wallhung WC pan order no. 82147.0 Specification snap catch for easy removal 4,0 kg Mounting acc. included / SEAT Order no. 89147.0 matching for Wallhung WC pan order no. 82147.0 Specification snap catch for easy removal 3,0 kg Mounting acc. included 8.3

VANITY BASINS

COUNTERTOP BASINS / CUTABLE

VANITY BASINS Countertop basin OREGON 81149.8 Order no. 81149.8 Certified to DIN EN 32 Dimensions 800 x 530 mm Specification 1 centre tap hole anti-splash rim Special specification 3 tap holes 23,0 kg Mounting acc. excl. Mounting set, order no. 89988.2 455 280 530 200 235 40 15 80-120 850 800 max.680 530 580 max.460 9.1

VANITY BASINS Countertop basin OREGON 81149.0 Order no. 81149.0 Certified to DIN EN 32 Dimensions 1000 x 530 mm Specification 1 centre tap hole anti-splash rim Special specification 3 tap holes 29,3 kg Mounting acc. excl. Mounting set, order no. 89988.2 455 280 530 200 235 40 15 80-120 850 1000 max.900 530 580 max.460 9.2

VANITY BASINS Double countertop basin OREGON DUE 81149.9 Order no. 81149.9 Certified to DIN EN 32 Dimensions 1300 x 550 mm Specification per basin 1 centre tap hole anti-splash rim Special specification per basin 3 tap holes 39,0 kg Mounting acc. excl. Mounting set, order no. 89988.2 855 670 455 200 235 50 15 1300 550 80-120 670 max.1195 530 600 850 max.460 9.3

VANITY BASINS Countertop basin / cutable PALACE 81250.3 Order no. 81250.3 Certified to DIN EN 32 Dimensions 1200 x 550 mm Specification 1 centre tap hole cutable to 800 mm, with 2 side cover to 830 mm Special specification 3 tap holes 40,0 kg Accessories excl. Side cover for cut surface left, order no. 87312.1 right, order no. 87312.2 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 800* 150 855 455 50 205 330 550 80-120 190 850 315 1200 max.1170 530 600 max.295 * = minimum measure for cutting 9.4

VANITY BASINS Countertop basin / cutable PALACE 81250.5 Order no. 81250.5 Certified to DIN EN 32 Dimensions 1500 x 550 mm Specification 1 centre tap hole cutable to 800 mm, with 2 side cover to 830 mm Special specification 3 tap holes 42,0 kg Accessories excl. Side cover for cut surface left, order no. 87312.1 right, order no. 87312.2 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 800* 855 150 455 50 205 1500 330 550 80-120 max.1470 530 190 600 850 315 max.295 * = minimum measure for cutting 9.5

VANITY BASINS Countertop basin / cutable PALACE 81250.6 Order no. 81250.6 Certified to DIN EN 32 Dimensions 1800 x 550 mm Specification 1 centre tap hole cutable to 800 mm, with 2 side cover to 830 mm Special specification 3 tap holes 44,0 kg Accessories excl. Side cover for cut surface left, order no. 87312.1 right, order no. 87312.2 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 800* 150 50 1355 855 455 205 330 550 190 315 80-120 850 1800 max.1770 530 600 max.295 * = minimum measure for cutting 9.6

VANITY BASINS Countertop basin / cutable PALACE 81251.3 Order no. 81251.3 Certified to DIN EN 32 Dimensions 1200 x 550 mm Specification 1 centre tap hole incl. towel rail cutable to 800 mm, with 2 side cover to 830 mm Special specification 3 tap holes 40,0 kg Accessories excl. Side cover for cut surface left, order no. 87312.1 right, order no. 87312.2 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 800* 855 455 150 50 205 330 550 80-120 190 850 315 1200 max.1170 530 600 max.295 * = minimum measure for cutting 9.7

VANITY BASINS Countertop basin / cutable PALACE 81251.5 Order no. 81251.5 Certified to DIN EN 32 Dimensions 1500 x 550 mm Specification 1 centre tap hole incl. towel rail cutable to 800 mm, with 2 side cover to 830 mm Special specification 3 tap holes 42,0 kg Accessories excl. Side cover for cut surface left, order no. 87312.1 right, order no. 87312.2 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 800* 855 150 455 50 205 1500 330 550 80-120 max.1470 530 190 600 850 315 max.295 * = minimum measure for cutting 9.8

VANITY BASINS Countertop basin / cutable PALACE 81251.6 Order no. 81251.6 Certified to DIN EN 32 Dimensions 1800 x 550 mm Specification 1 centre tap hole incl. towel rail cutable to 800 mm, with 2 side cover to 830 mm Special specification 3 tap holes 44,0 kg Accessories excl. Side cover for cut surface left, order no. 87312.1 right, order no. 87312.2 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 800* 150 50 1355 855 455 205 330 550 190 315 80-120 850 1800 max.1770 530 600 max.295 * = minimum measure for cutting 9.9

VANITY BASINS Countertop double basin / cutable PALACE DUE 81260.5 Order no. 81260.5 Certified to DIN EN 32 Dimensions 1500 x 570 mm Specification per basin 1 centre tap hole cutable to 1350 mm, with 2 side cover to 1380 mm Special specification per basin 3 tap holes 41,0 kg Accessories excl. Side cover for cut surface left, order no. 87312.1 right, order no. 87312.2 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 1350* 855 360 150 455 50 330 1500 210 570 80-120 440 max.1470 185 530 600 850 315 max.295 * = minimum measure for cutting 9.10

VANITY BASINS Countertop double basin / cutable PALACE DUE 81260.6 Order no. 81260.6 Certified to DIN EN 32 Dimensions 1800 x 570 mm Specification per basin 1 centre tap hole cutable to 1350 mm, with 2 side cover to 1380 mm Special specification per basin 3 tap holes 43,0 kg Accessories excl. Side cover for cut surface left, order no. 87312.1 right, order no. 87312.2 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 1350* 360 150 1355 855 455 50 330 1800 210 570 80-120 440 max.1770 185 530 600 850 315 max.295 * = minimum measure for cutting 9.11

VANITY BASINS Countertop double basin / cutable PALACE DUE 81261.5 Order no. 81261.5 Certified to DIN EN 32 Dimensions 1500 x 570 mm Specification per basin 1 centre tap hole incl. towel rail cutable to 1350 mm, with 2 side cover to 1380 mm Special specification per basin 3 tap holes 41,0 kg Accessories excl. Side cover for cut surface left, order no. 87312.1 right, order no. 87312.2 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 1350* 855 360 150 455 50 330 1500 210 570 80-120 440 max.1470 185 530 600 850 315 max.295 * = minimum measure for cutting 9.12

VANITY BASINS Countertop double basin / cutable PALACE DUE 81261.6 Order no. 81261.6 Certified to DIN EN 32 Dimensions 1800 x 570 mm Specification per basin 1 centre tap hole incl. towel rail cutable to 1350 mm, with 2 side cover to 1380 mm Special specification per basin 3 tap holes 43,0 kg Accessories excl. Side cover for cut surface left, order no. 87312.1 right, order no. 87312.2 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 1350* 360 150 1355 855 455 50 330 1800 210 570 80-120 440 max.1770 185 530 600 850 315 max.295 * = minimum measure for cutting 9.13

VANITY BASINS Order form for variable cuts of washbasins MAKE A COPY BEFORE FILLING OUT THE FORM! We would like to order piece(s) (Please use separate order form for each cut!) Mark the relevant box or give precise measurements Colour Washbasins Palace 81250.3 1200 mm 81251.3 1200 mm Right-angled cut Precise measurements for symmetric cuts 81250.5 1500 mm 81251.5 1500 mm 81250.6 1800 mm 81251.6 1800 mm 81260.5 1500 mm 81261.5 1500 mm mm Precise measurements for asymmetric cuts 81260.6 1800 mm 81251.6 1800 mm L R L = mm R = mm symmetric cut, right angle symmetric cut, diagonal asymmetric cut, right angle asymmetric cut, diagonal right angled cut on one side cut diagonally on one side Diagonal cut B F Precise measurements for symmetric cuts B = mm F = mm without end caps for cut surface with end cap(s) (already affixed) with 2 end caps (left and right) end cap(s) left end cap(s) right FL BL BR FR Precise measurements for asymmetric cuts BL = mm FL = mm BR = mm FR = mm ATTENTION: Only right angled cuts are possible. In case of deliveries with affixed end caps, the width given by you is always inclusive of the end caps. The uncut widths of the washbasins (1200, 1500, 1800 mm) are the usual ceramic tolerances. If exact widths for installation are required, there are also cuts for widths of 1200, 1500 and 1800 mm necessary. Note additional price for cutting! We recommande the basins 81250.6/81251.6 for cutting to 1500 mm, 81260.6/81261.6 for cutting to 1500 mm, 81250.5/81251.5 for cutting to 1200 mm, 81260.5/81261.5 for cutting to 1200 mm, 81250.3/81251.3 for cutting to 800 mm. WT Palace 81250.3 81250.5 81250.6 81260.5 81260.6 81251.3 81251.5 81251.6 81261.5 81261.6 can be cut up to a max. (mm) 800 800 800 1350 1350 800 800 800 1350 1350 M i n i m u m w e i d t h s symmetric cut asymmetric cut with 2 end caps (mm) 830 830 830 1380 1380 830 830 830 1380 1380 with 1 end cap (mm) 815 815 815 1365 1365 815 815 815 1365 1365 left min. (mm) 400 400 400 675 675 400 400 400 675 675 right min. (mm) 400 400 400 675 675 400 400 400 675 675 left min. with end cap (mm) 415 415 415 690 690 415 415 415 690 690 right min. with end cap (mm) 415 415 415 690 690 415 415 415 690 690 OBJECT: ORDER NO. FITTER: WHOLESALER: (or enclose order form) 9.14

VANITY BASINS Countertop basin / cutable FIORA 81313.8 Order no. 81313.8 Certified to DIN EN 32 Dimensions 920 x 500 mm Specification 1 centre tap hole cutable 20,0 kg Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 500* 280 220 500 310 195 40 50 305 80-120 850 920 max.895 530 600 max.300 * = minimum measure for cutting 9.15

VANITY BASINS Order form for variable cuts of washbasins MAKE A COPY BEFORE FILLING OUT THE FORM! We would like to order piece(s) (Please use separate order form for each cut!) Washbasin Fiora 81313.8 920 mm Mark the relevant box or give precise measurements Colour Right angled cut Precise measurements for symmetric cut symmetric cut, right angle symmetric cut, diagonal asymmetric cut, right angle asymmetric cut, diagonal right angle cut on one side cut diagonally on one side L R Diagonal cut B F mm Precise measurements for asymmetric cut L = mm R = mm Precise measurements for symmetric cut B = mm F = mm FL BL BR FR Precise measurements for asymmetric cut BL = mm FL = mm BR = mm FR = mm ATTENTION: There are no end caps for model 81313.8. The uncut width of the washbasin (920 mm) is the usual ceramic tolerances. If exact width for installation is required, there is also cut for width 920 necessary. Note additional price for cutting! M i n i m u m w e i d t h s symmetric cut asymmetric cut can be cut up to a max. left min right min Fiora (mm) (mm) (mm) 81313.8 500 250 250 OBJECT: ORDER NO. FITTER: WHOLESALER: (or enclose order form) 9.16

VANITY BASINS Countertop double basin FIORA DUE 81313.9 Order no. 81313.9 Certified to DIN EN 32 Dimensions 1220 x 500 mm Specification per basin 1 centre tap hole 25,0 kg Mounting acc. excl. Mounting set, order no. 89988.2 600 855 455 220 310 195 50 50 1220 500 80-120 600 max.1200 530 600 850 305 max.300 9.17

VANITY BASINS Countertop washbasin SANO 81343.3 Order no. 81343.3 Certified to DIN EN 32 Dimensions 670 x 510 mm Specification 1 centre tap hole Special specification 3 tap holes 14,0 kg Mounting acc. excl. Mounting set, order no. 89988.2 280 200 365 510 45 190 50 345 80-120 850 670 max.635 530 600 max.340 Z 0001 9.18

VANITY BASINS Countertop washbasin SANO 81343.4 Order no. 81343.4 Certified to DIN EN 32 Dimensions 750 x 510 mm Specification 1 centre tap hole Special specification 3 tap holes 15,5 kg Mounting acc. excl. Mounting set, order no. 89988.2 280 200 365 510 45 190 50 345 80-120 850 750 max.700 530 600 max.340 Z 0001 9.19

VANITY BASINS Countertop washbasin SANO 81343.5 Order no. 81343.5 Certified to DIN EN 32 Dimensions 850 x 510 mm Specification 1 centre tap hole Special specification 3 tap holes 16,5 kg Mounting acc. excl. Mounting set, order no. 89988.2 280 45 200 50 365 510 190 345 80-120 850 850 max.810 530 600 max.340 Z 0001 9.20

VANITY BASINS Countertop washbasin SANO 81343.7 Order no. 81343.7 Certified to DIN EN 32 Dimensions 1050 x 510 mm Specification 1 centre tap hole Special specification 3 tap holes 19,0 kg Mounting acc. excl. Mounting set, order no. 89988.2 280 45 200 50 365 510 190 345 80-120 850 1050 max.980 530 600 max.340 Z 0001 9.21

VANITY BASINS Countertop basin / cutable VIENNA-VARIA 81347.8 Order no. 81347.8 Certified to DIN EN 32 Dimensions 800 x 480 mm Specification 1 centre tap hole cutable to 650 mm, with 2 side cover to 680 mm Special specification 3 tap holes 13,5 kg Accessories excl. Syphon cover, order no. 81947.1 Accessories excl. Side cover for cut surface left, order no. 87340.3 right, order no. 87340.4 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 650* 280 200 300 190 480 45 50 300 80-120 850 800 max.775 530 600 max.295 * = minimum measure for cutting Z 0001 9.22

VANITY BASINS Countertop basin / cutable VIENNA-VARIA 81347.9 Order no. 81347.9 Certified to DIN EN 32 Dimensions 1000 x 550 mm Specification 1 centre tap hole cutable to 800 mm, with 2 side cover to 830 mm Special specification 3 tap holes 19,0 kg Accessories excl. Syphon cover, order no. 81947.9 Accessories excl. Side cover for cut surface left, order no. 87340.3 right, order no. 87340.4 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 800* 280 215 300 550 225 45 50 80-120 850 300 1000 max.975 530 600 max.295 * = minimum measure for cutting Z 0001 9.23

VANITY BASINS Countertop double basin / cutable VIENNA-VARIA DUE 81341.9 Order no. 81341.9 Certified to DIN EN 32 Dimensions 1300 x 500 mm Specification per basin 1 centre tap hole cutable to 1150 mm, with 2 side cover to 1180 mm Special specification per basin 3 tap holes 26,6 kg Accessories excl. Side cover for cut surface left, order no. 87340.3 right, order no. 87340.4 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 1150* 855 570 455 45 200 300 180 50 500 80-120 570 850 300 1300 max.1275 530 600 max.295 * = minimum measure for cutting Z 0001 9.24

VANITY BASINS Order form for variable cuts of washbasins MAKE A COPY BEFORE FILLING OUT THE FORM! We would like to order piece(s) (Please use separate order form for each cut!) Mark the relevant box or give precise measurements Colour Washbasins Vienna-Varia 81347.8 800 mm 81347.9 1000 mm 81341.9 1300 mm symmetric cut, right angle symmetric cut, diagonal asymmetric cut, right angle asymmetric cut, diagonal right angled cut on one side cut diagonally on one side Right-angled cut L R Diagonal cut B Precise measurements for symmetric cuts mm Precise measurements for asymmetric cuts L = mm R = mm Precise measurements for symmetric cuts without end caps for cut surface with end cap(s) (already affixed) F B = mm F = mm with 2 end caps (left and right) end cap(s) left end cap(s) right FL BL BR FR Precise measurements for asymmetric cuts BL = mm FL = mm BR = mm FR = mm ATTENTION: Only right angled cuts are possible. In case of deliveries with affixed end caps, the width given by you is always inclusive of the end caps. The uncut widths of the washbasins (800, 1000, 1300 mm) are the usual ceramic tolerances. If exact widths for installation are required, there are also cuts for widths of 800, 1000, 1300 mm necessary. Note additional price for cutting! Vienna-Varia 81347.8 81347.9 81341.9 can be cut up to a max. (mm) 650 800 1150 M i n i m u m w e i d t h s symmetric cut asymmetric cut with 2 end caps (mm) 680 830 1180 with 1 end cap (mm) 665 815 1165 left min. (mm) 325 400 575 right min. (mm) 325 400 575 left min. with end cap (mm) 340 415 590 right min. with end cap (mm) 340 415 590 OBJECT: ORDER NO. FITTER: WHOLESALER: (or enclose order form) 9.25

VANITY BASINS Countertop basin DESIGN 81354.7 Order no. 81354.7 Certified to DIN EN 32 Dimensions 1040 x 585 mm Specification 1 centre tap hole anti-splash rim Special specification 3 tap holes 20,0 kg Accessories excl. Pedestal, order no. 81954.7 Mounting acc. excl. Mounting set, order no. 89988.2 280 50 280 50 180 1040 585 80-120 530 200 600 850 80-120 530 600 200 ~850* * = Effective height must be fixed according to the height of the pedestal. 9.26

VANITY BASINS Pedestal 81954.7 Order no. 81954.7 matching for Washbasin order no. 81354.7 7,0 kg 9.27

VANITY BASINS Countertop basin / cutable GALLERY 81417.6 Order no. 81417.6 Certified to DIN EN 32 Dimensions 1020 x 520 mm Specification 1 centre tap hole cutable Special specification 3 tap holes 18,0 kg Accessories excl. Syphon cover, order no. 81917.2 Mounting acc. excl. Mounting set, order no. 89988.2 Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 630* 280 240 390 520 190 50 45 355 80-120 850 600 max.990 530 600 max.345 1020 * = minimum measure for cutting 9.28

VANITY BASINS Order form for variable cuts of washbasins MAKE A COPY BEFORE FILLING OUT THE FORM! We would like to order piece(s) (Please use separate order form for each cut!) Washbasin Gallery 81417.6 1020 mm Mark the relevant box or give precise measurements Colour Right angled cut Precise measurements for symmetric cut symmetric cut, right angle symmetric cut, diagonal asymmetric cut, right angle asymmetric cut, diagonal right angle cut on one side cut diagonally on one side L R Diagonal cut B F mm Precise measurements for asymmetric cut L = mm R = mm Precise measurements for symmetric cut B = mm F = mm FL BL BR FR Precise measurements for asymmetric cut BL = mm FL = mm BR = mm FR = mm ATTENTION: There are no end caps for model 81417.6. The uncut width of the washbasin (1020 mm) is the usual ceramic tolerances. If exact width for installation is required, there is also cut for width 1020 necessary. Note additional price for cutting! M i n i m u m w e i d t h s symmetric cut asymmetric cut can be cut up to a max. left min right min Gallery (mm) (mm) (mm) 81417.6 630 315 315 OBJECT: ORDER NO. FITTER: WHOLESALER: (or enclose order form) 9.29

VANITY BASINS Countertop double basin GALLERY 81417.8 Order no. 81417.8 Certified to DIN EN 32 Dimensions 1350 x 520 mm Specification per basin 1 centre tap hole Special specification per basin 3 tap holes 30,5 kg Accessories excl. Syphon cover, order no. 81917.2 Mounting acc. excl. Mounting set, order no. 89988.2 640 855 50 455 45 240 390 520 80-120 190 355 640 850 600 1350 max.1320 530 600 max.345 9.30

VANITY BASINS Syphon cover 81917.2 Order no. 81917.2 matching for Washbasins order no. 81417.6, 81417.8 6,5 kg Mounting acc. incl. Device for fixing, order no. 89001.2 9.31

BUILT IN BASINS

VANITY BASINS Built in basin BIROVA 81119.1 Order no. 81119.1 Dimensions 530 x 405 mm Specification without tap hole Special specification glazed outer surface 8,0 kg Mounting acc. excl. Mounting set, order no. 89904.0 355 405 115 200 30 490 530 80-120 530 600 850 9.32

VANITY BASINS Built in basin BIJOU 81122.0 Order no. 81122.0 Dimensions 445 x 400 mm Specification 1 centre tap hole 7,0 kg Mounting acc. excl. Mounting set, order no. 89904.0 365 400 165 200 30 80-120 850 415 445 530 600 9.33

VANITY BASINS Built in basin BIJOU 81123.0 Order no. 81123.0 Dimensions 520 x 455 mm Specification 1 centre tap hole Special specification glazed outer surface 9,5 kg Mounting acc. excl. Mounting set, order no. 89904.0 400 455 165 210 30 80-120 850 480 530 600 520 9.34

VANITY BASINS Built in basin BIJOU 81124.0 Order no. 81124.0 Dimensions 550 x 480 mm Specification 1 centre tap hole Special specification glazed outer surface 9,5 kg Mounting acc. excl. Mounting set, order no. 89904.0 210 480 175 30 420 80-120 850 510 530 600 550 9.35

VANITY BASINS Built in basin BIJOU 81124.5 Order no. 81124.5 Dimensions 555 x 485 mm Specification without tap hole 10,0 kg Mounting acc. excl. Mounting set, order no. 89904.0 510 170 430 485 80-120 530 30 225 600 850 555 9.36

VANITY BASINS Built in basin LIPSY 81129.1 Order no. 81129.1 Dimensions 565 x 415 mm Specification without tap hole 8,0 kg Mounting acc. excl. Mounting set, order no. 89911.0 350 415 95 220 12 505 565 80-120 530 600 850 9.37

VANITY BASINS Built in basin FIORA 81178.0 Order no. 81178.0 Dimensions 455 x 455 mm Specification 1 centre tap hole 8,0 kg Mounting acc. excl. Mounting set, order no. 89904.0 410 455 180 195 30 80-120 850 410 530 600 455 9.38

VANITY BASINS Built in basin FIORA 81178.2 Order no. 81178.2 Dimensions 485 x 485 mm Specification 1 centre tap hole Special specification 3 tap holes 9,0 kg Mounting acc. excl. Mounting set, order no. 89904.0 440 485 190 205 30 80-120 850 440 485 530 600 9.39

VANITY BASINS Built in basin COMPAC 81188.0 Order no. 81188.0 Dimensions 440 x 400 mm Specification 1 centre tap hole Special specification 3 tap holes 8,0 kg Mounting acc. excl. Mounting set, order no. 89904.0 365 400 160 195 30 410 440 80-120 530 600 850 9.40

VANITY BASINS Built in basin SAVOY 81319.2 Order no. 81319.2 Dimensions 545 x 420 mm Specification without tap hole hidden overflow glazed outer surface 8,4 kg Mounting acc. excl. Mounting set, order no. 89904.0 350 420 130 205 30 80-120 850 500 545 530 600 9.41

VANITY BASINS Built in basin CRISTAL 81323.0 Order no. 81323.0 Dimensions 520 x 446 mm Specification 1 centre tap hole 8,2 kg Mounting acc. excl. Mounting set, order no. 89904.0 405 446 180 210 30 80-120 850 485 520 530 600 9.42

7 VANITY BASINS Fixing set stone worktop 89904.0 3 4 worktop stone wooden worktop 2 5 6 7 8 1 DESCRIPTION 1. Vanity basin 2. Silicon caoutchouc 3. Syntetic resin top 4. Syntetic resin adhesive 5. Worktop 6. Wooden wedge 9 8 2 1 7 5 10 2 9 1 8 Order no. 89904.0 matching to Built in basins order no. 81119.1, 81122.0, 81123.0, 81124.0, 81124.5, 81178.0, 81178.2, 81188.0, 81319.2, 81323.0 7. Tension clip 8. Wood screw 9. Dowelling paste 10. Pastened stone 9.43 5

2 7 VANITY BASINS Fixing set 89911.0 18 6 23ca. 5 4 2 3 50 4 1 stone worktop wooden worktop 3 6 5 1 Order no. 89911.0 matching to Built in basin order no. 81129.1 DESCRIPTION 1. Vanity basin 2. Worktop 3. Tension clip 4. Wood screw 5. Silicon caoutchouc 6. Hexagonal screw with plug 7. Dowelling paste 9.44

DROP IN BASINS

VANITY BASINS Drop in basin INDOVA 81139.1 Order no. 81139.1 Dimensions 560 x 450 mm Specification 1 centre tap hole 8,0 kg Mounting acc. incl. Template, order no. 89139.2 Mounting acc. excl. Silicon caoutchouc 450 160 195 12 80-120 850 560 530 600 9.45

VANITY BASINS Drop in basin INDOVA 81139.2 Order no. 81139.2 Dimensions 600 x 480 mm Specification 1 centre tap hole 9,0 kg Mounting acc. incl. Template, order no. 89139.2 Mounting acc. excl. Silicon caoutchouc 480 160 195 12 80-120 850 600 530 600 9.46

VANITY BASINS Drop in basin INDOVA 81139.3 Order no. 81139.3 Dimensions 620 x 485 mm Specification 1 centre tap hole Special specification 3 tap holes 9,5 kg Mounting acc. incl. Template, order no. 89742.7 Mounting acc. excl. Silicon caoutchouc 485 175 195 15 80-120 850 620 530 600 9.47

VANITY BASINS Drop in basin VIENNA 81141.1 Order no. 81141.1 Dimensions 555 x 430 mm Specification 1 centre tap hole Special specification 3 tap holes 7,2 kg Mounting acc. incl. Template, order no. 89744.7 Mounting acc. excl. Mounting set, order no. 89909.0 555 180 430 80-120 530 600 165 15 850 9.48

VANITY BASINS Drop in basin VIENNA 81141.2 Order no. 81141.2 Dimensions 630 x 510 mm Specification 1 centre tap hole Special specification 3 tap holes 10,0 kg Mounting acc. incl. Template, order no. 89744.8 Mounting acc. excl. Mounting set, order no. 89909.0 510 210 180 20 80-120 850 630 530 600 9.49

VANITY BASINS Drop in basin FIORA 81177.2 Order no. 81177.2 Dimensions Ø 490 mm Specification 1 centre tap hole 12,0 kg Mounting acc. incl. Template, order no. 89139.2 Mounting acc. excl. Silicon caoutchouc 180 175 15 490 490 80-120 530 600 850 9.50

VANITY BASINS Drop in basin MYLIFE 81194.6 Order no. 81194.6 Dimensions 750 x 480 mm Specification Charge 104 1 centre tap hole Special specification Charge 109 without tap hole 13,5 kg Mounting acc. incl. Charge 104 run off and overflow system Clou GEBERIT, order no. 89194.1 Charge 109 valve without overflow, order no. 89543.9 Template, order no. 89794.6 Mounting acc. excl. Mounting set, order no. 89909.0 480 850 530 215 145 30 120 600 750 9.51

VANITY BASINS Drop in basin OBJECT 81206.4 Order no. 81206.4 Dimensions 560 x 420 mm Specification 1 centre tap hole Special specification 3 tap holes 8,5 kg Mounting acc. incl. Template, order no. 89206.4 Mounting acc. excl. Mounting set, order no. 89909.0 420 160 185 15 560 80-120 530 600 850 9.52

VANITY BASINS Drop in basin LAURA 81253.2 Order no. 81253.2 Dimensions 565 x 480 mm Specification 1 centre tap hole Special specification 3 tap holes 8,0 kg Mounting acc. incl. Template 190 180 15 480 80-120 850 565 530 600 9.53

VANITY BASINS Drop in basin ALESSI 81397.1 Order no. 81397.1 Certified to DIN EN 32 Dimensions 500 x 500 mm Specification 1 centre tap hole 10,0 kg Mounting acc. incl. with concealed ceramic outlet and overflow, chrome-plated vertical cover, order no. 89097.8 Template, order no. 89197.3 Mounting acc. excl. Syphon D40 chrome order no. 89397.9 500 280 225 50 80 530/560* 600/660* 500 120/160* 900 * = Adhere to these dimensions if ALESSI-INDA furniture is being fitted. 9.54

VANITY BASINS Mounting indication 3 2 1 matching to Drop in basins order no. 81139.1, 81139.2, 81139.3, 81177.2, 81253.2 DESCRIPTION 1. Vanity basin 2. Worktop 3. Silicon caoutchouc 9.55

VANITY BASINS Fixing set 89909.0 1 6 2 3 4 5 Order no. 89909.0 matching to Drop in basins order no. 81141.1, 81141.2, 81194.6, 81206.4 DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Adjusting screw 5. Hexagonal screw with plug 6. Silicon caoutchouc 9.56

VANITY BASINS Mounting indication 3 2 1 matching for Drop in basin order no. 81397.1 DESCRIPTION 1. Vanity basin 2. Worktop 3. Silicon caoutchouc 9.57

SEMI RECESSED BASINS

VANITY BASINS Semi recessed basin SWING 81041.1 Order no. 81041.1 Dimensions 555 x 460 mm Specification 1 centre tap hole Special specification 3 tap holes 14,0 kg Mounting acc. incl. Template, order no. 89140.1 Mounting set, order no. 89060.2 260 180 200 25 555 460 80-120 530 600 850 20 240 9.58

VANITY BASINS Semi recessed basin SWING 81240.4 Order no. 81240.4 Dimensions 655 x 555 mm Specification 1 centre tap hole Special specification 3 tap holes 19,0 kg Mounting acc. incl. Template, order no. 89140.5 Mounting set, order no. 89909.0 555 280 195 210 25 80-120 850 25 255 655 530 600 9.59

VANITY BASINS Semi recessed basin VIENNA 81140.3 Order no. 81140.3 Dimensions 555 x 455 mm Specification 1 centre tap hole Special specification 3 tap holes 10,0 kg Mounting acc. incl. Template, order no. 89140.3 Mounting set, order no. 89909.0 25 180 255 455 25 80-120 175 850 20 255 850 555 530 600 9.60

VANITY BASINS Semi recessed basin VIENNA 81140.5 Order no. 81140.5 Dimensions 650 x 540 mm Specification 1 centre tap hole Special specification 3 tap holes 12,0 kg Mounting acc. incl. Template, order no. 89140.5 Mounting set, order no. 89909.0 25 25 80-120 20 280 530 850 600 210 850 200 280 540 650 9.61

VANITY BASINS Semi recessed basin OBJECT 81306.4 Order no. 81306.4 Dimensions 560 x 430 mm Specification 1 centre tap hole Special specification 3 tap holes 8,8 kg Mounting acc. incl. Template, order no. 89306.4 Mounting set, order no. 89909.0 200 160 25 560 430 80-120 530 600 850 270 9.62

VANITY BASINS Semi recessed basin GALLERY 81317.4 Order no. 81317.4 Dimensions 650 x 530 mm Specification 1 centre tap hole Special specification 3 tap holes 14,5 kg Mounting acc. incl. Template, order no. 89140.5 Mounting set, order no. 89909.0 280 20 195 530 195 20 260 80-120 850 650 530 600 9.63

VANITY BASINS Fixing set 89060.2 4 2 3 1 Order no. 89060.2 matching to Semi recessed basins oder no. 81041.1 DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Silicon caoutchouc 9.64

VANITY BASINS Fixing set 89909.0 1 6 2 3 4 5 Order no. 89909.0 matching to Semi recessed basins order no. 81140.3, 81140.5, 81240.4, 81306.4, 81317.4 DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Adjusting screw 5. Hexagonal screw with plug 6. Silicon caoutchouc 9.65

WASHBASIN BOWLS

VANITY BASINS Washbasin bowl MYLIFE 81894.4 Order no. 81894.4 Dimensions 650 x 440 mm Specification Charge 104 1 centre tap hole Special specification Charge 109 without tap hole 13,0 kg Mounting acc. incl. Charge 104 run off and overflow system Clou GEBERIT, order no. 89194.1 Charge 109 valve without overflow, order no. 89543.9 Template, order no. 89794.4 Mounting set, order no. 89194.0 225 440 530 600 140 160 120 885 650 9.66

VANITY BASINS Washbasin bowl ALESSI 81897.1 Order no. 81897.1 Certified to DIN EN 32 Dimensions 520 x 520 mm Specification Charge 104 1 centre tap hole Special specification Charge 109 without tap hole 12,5 kg Mounting acc. incl. Charge 104 run off and overflow system Clou GEBERIT, order no. 89194.1 Charge 109 valve without overflow, order no. 89543.9 Template, order no. 89197.8 Fixing set, order no. 89194.0 Mounting acc. excl. Syphon D40 chrome, order no. 89397.9 280 50 520 175 120/160* 530/560* 600/560* 900 520 * = Adhere to these dimensions if ALESSI-INDA furniture is being fitted. 9.67

VANITY BASINS Fixing set 89194.0 4 1 3 2 5 6 7 Order no. 89194.0 matching to Washbasin bowl order no. 81894.4, 81897.1 DESCRIPTION 1. Washbasin bowl 2. Worktop 3. Silicon caoutchouc 4. Plug 5. Washer 6. Hexagonal nut 7. Grubscrew 9.68

SET DORADO

SET DORADO Washbasin 81004.4 Order no. 81004.4 Certified to DIN EN 32 Dimensions 600 x 500 mm Specification 1 centre tap hole Special specification 3 tap holes 17,0 kg Accessories excl. Syphon cover, order no. 81901.1 Pedestal, order no. 81901.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 500 205 215 215 45 45 600 80-120 530 600 850 80-120 530 600 ~850* * = Effective height must be fixed according to the height of the pedestal. Z 0001 10.1

SET DORADO Washbasin 81004.5 Order no. 81004.5 Certified to DIN EN 32 Dimensions 650 x 500 mm Specification 1 centre tap hole Special specification 3 tap holes 19,0 kg Accessories excl. Syphon cover, order no. 81901.1 Pedestal, order no. 81901.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 500 200 215 215 45 45 80-120 850 80-120 ~840* 650 530 600 530 600 * = Effective height must be fixed according to the height of the pedestal. Z 0001 10.2

SET DORADO Syphon cover 81901.1 Pedestal 81901.0 / SYPHON COVER Order no. 81901.1 matching for Washbasins order no. 81004.4, 81004.5 4,6 kg Mounting acc. incl. Device for fixing, order no. 89001.0 / PEDESTAL Order no. 81901.0 matching for Washbasins order no. 81004.4, 81004.5 8,6 kg 10.3

SET DORADO Small washbasin TRIBERG 81794.4 Order no. 81794.4 Certified to DIN EN 111 Dimensions 440 x 380 mm Specification without tap hole Special specification 1 centre tap hole 5,0 kg Mounting acc. incl. Mounting set, order no. 89840.0 300 185 135 175 70 185 380 440 850 135 80-120 565 615 Z 0001 10.4

SET DORADO Floorstanding WC combination DUO 82276.0 Order no. 82276.0 Certified to EN 977, EN 33 Specification Washdown for 6-l-flush Outlet horizontal VARIO, vertical 70-300 mm 23,5 kg Accessories excl. Cistern, order no. 82035.0, 82636.0, 82645.3, 82835.0 Seat and cover, order no. 89021.0 Mounting acc. excl. Special elbow for vertical LAUFEN connection 70-220 mm, order no. 89009.2 Special elbow for vertical only LAUFENconnection 220-300 mm, order no. 89902.5 380 175 400 720 750 840 30 360 180 260 70-300 10.5

SET DORADO Cistern MODERNA 82035.0 Order no. 82035.0 Certified to DIN 19542 matching for Floorstanding WC pan order no. 82276.0 Specification Flushing mechanisme GEBERIT water condensation insulation Flush can be interrupted by pressing twice Water inlet side or rear 13,0 kg Mounting acc. excl. Corner valve for water inlet 380 175 295 410 315 60 10.6

SET DORADO Cistern MODERNA 82636.0 Order no. 82636.0 Certified to Australian Standard matching for Floorstanding WC pan order no. 82276.0 Specification Flushing mechanisme GEBERIT water condensation insulation Dual-Flush (3/6-l-flush) Water inlet side or rear 13,0 kg Mounting acc. excl. Corner valve for water inlet 380 175 295 410 315 60 10.7

SET DORADO Cistern MODERNA 82645.3 Order no. 82645.3 Certified to Taiwan Standard matching for Floorstanding WC pan order no. 82276.0 Specification Flushing mechanisme DAL Flush can be interrupted by pressing twice Water inlet bottom 13,0 kg 140 380 175 410 35 10.8

SET DORADO Cistern MODERNA 82835.0 Order no. 82835.0 Certified to DIN 19542 matching for Floorstanding WC pan order no. 82276.0 Specification Flushing mechanisme DAL water condensation insulation Flush can be interrupted by pressing twice Water inlet side or rear 13,0 kg Mounting acc. excl. Corner valve for water inlet 380 175 295 410 315 60 10.9

SET DORADO Floorstanding WC pan SEDAN 82061.9 Order no. 82061.9 Specification Washdown Outlet vertical 13,0 kg Accessories excl. Seat and cover, order no. 89021.0 365 460 390 40 345 240 10.10

SET DORADO Floorstanding WC pan MELOS 82140.8 Order no. 82140.8 Certified to EN 977, EN 37 Specification Washdown for 6-l-flush Outlet vertical 12,0 kg Accessories excl. Seat and cover, order no. 89021.0 470 515 390 340 60 355 20 270-300 10.11

SET DORADO Wallhung WC pan PROFIL 82019.0 Order no. 82019.0 Certified to EN 977, EN 38 Specification Washdown for 6-l-flush 14,0 kg Accessories excl. Seat and cover, order no. 89021.0 180 40 510 100 225 135 65 400 10 355 20 10.12

SET DORADO Wallhung WC pan SUPREMA 82165.0 Order no. 82165.0 Certified to EN 977, EN 38 Specification Washdown for 6-l-flush 14,0 kg Accessories excl. Seat and cover, order no. 89021.0 180 40 530 100 225 135 50 400 10 355 20 10.13

SET DORADO Seat and cover OBJECT 89021.0 Order no. 89021.0 matching for Floorstanding WC pan order no. 82061.9, 82140.8, 82276.0 Wallhung WC pan order no. 82019.0, 82165.0 2,8 kg Mounting set included 10.14

SET DORADO Floorstanding bidet MODERNA 83073.0 Order no. 83073.0 Specification 1 centre tap hole 18,0 kg 50 100 400 200 600 360 150 245 Z 0001 10.15

SET DORADO Wallhung bidet SUPREMA 83006.1 Order no. 83006.1 Specification 1 centre tap hole 14,5 kg Mounting acc. excl. Steel support, order no. 89900.0 Steel support, UK-Version, order no. 89900.1 Bolt caps, order no. 89263.0 180 40 530 100 120 325 210 400 355 300 60 180 Z 0001 10.16

SET OBJECT

SET OBJECT Washbasin 81106.1 Order no. 81106.1 Certified to DIN EN 32 Dimensions 550 x 430 mm Specification 1 centre tap hole Special specification 3 tap holes 12,5 kg Accessories excl. Syphon cover, order no. 81916.1 Pedestal, order no. 81916.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 430 200 195 195 55 55 550 80-120 530 600 850 80-120 530 600 ~850* * = Effective height must be fixed according to the height of the pedestal. 11.1

SET OBJECT Washbasin 81106.2 Order no. 81106.2 Certified to DIN EN 32 Dimensions 600 x 400 mm Specification 1 centre tap hole Special specification 3 tap holes 12,5 kg Accessories excl. Syphon cover, order no. 81916.1 Pedestal order, no. 81916.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 400 200 195 195 55 55 600 80-120 530 600 850 80-120 530 600 ~850* * = Effective height must be fixed according to the height of the pedestal. 11.2

SET OBJECT Washbasin 81106.4 Order no. 81106.4 Certified to DIN EN 32 Dimensions 600 x 465 mm Specification 1 centre tap hole Special specification 3 tap holes 13,5 kg Accessories excl. Syphon cover, order no. 81916.1 Pedestal, order no. 81916.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 465 205 195 195 55 55 600 80-120 530 600 850 80-120 530 600 ~855* * = Effective height must be fixed according to the height of the pedestal. 11.3

SET OBJECT Washbasin 81106.5 Order no. 81106.5 Certified to DIN EN 32 Dimensions 650 x 480 mm Specification 1 centre tap hole Special specification 3 tap holes 17,0 kg Accessories excl. Syphon cover, order no. 81916.1 Pedestal, order no. 81916.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 55 480 200 195 55 195 650 80-120 530 600 850 80-120 530 600 ~865* * = Effective height must be fixed according to the height of the pedestal. 11.4

SET OBJECT Syphon cover 81916.1 Pedestal 81916.0 / SYPHON COVER Order no. 81916.1 matching for Washbasins order no. 81106.1, 81106.2, 81106.4, 81106.5 6,5 kg Mounting acc. incl. Device for fixing, order no. 89001.0 / PEDESTAL Order no. 81916.0 matching for Washbasins order no. 81106.1, 81106.2, 81106.4, 81106.5 7,0 kg 11.5

SET OBJECT Drop in basin 81206.4 Order no. 81206.4 Dimensions 560 x 420 mm Specification 1 centre tap hole Special specification 3 tap holes 8,5 kg Accessories incl. Template, order no. 89206.4 Mounting acc. excl. Mounting set, order no. 89909.0 420 160 185 15 560 80-120 530 600 850 11.6

SET OBJECT Semi recessed basin 81306.4 Order no. 81306.4 Dimensions 560 x 430 mm Specification 1 centre tap hole Special specification 3 tap holes 8,8 kg Mounting acc. incl. Template, order no. 89306.4 Mountimg set, order no. 89909.0 200 430 160 25 560 80-120 530 600 850 270 11.7

SET OBJECT Fixing set 89909.0 1 6 2 3 4 5 Order no. 89909.0 matching for Drop in basin order no. 81206.4 Semi recessed basin order no. 81306.4 DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Adjusting screw 5. Hexagonal screw with plug 6. Silicon caoutchouc 11.8

SET OBJECT Small washbasin 81506.0 Order no. 81506.0 Certified to DIN EN 111 Dimensions 500 x 220 mm Specification Prepunched tap hole left and right 6,0 kg Mounting acc. excl. Mounting set, order no. 89988.2 365 95 220 155 45 500 80-120 40 850 580 650 11.9

SET OBJECT Small washbasin 81506.3 Order no. 81506.3 Certified to DIN EN 111 Dimensions 350 x 270 mm Specification 1 centre tap hole 5,2 kg Mounting acc. excl. Mounting set, order no. 89988.2 180 135 270 145 45 350 80-120 580 650 850 11.10

SET OBJECT Small washbasin 81506.4 Order no. 81506.4 Certified to DIN EN 111 Dimensions 450 x 310 mm Specification 1 centre tap hole 8,0 kg Mounting acc. excl. Mounting set, order no. 89988.2 280 145 310 155 45 450 80-120 580 850 650 11.11

SET OBJECT Small washbasin 81506.5 Order no. 81506.5 Certified to DIN EN 111 Dimensions 500 x 320 mm Specification 1 centre tap hole 9,5 kg Mounting acc. excl. Mounting set, order no. 89988.2 280 145 320 160 45 500 80-120 580 650 850 11.12

SET OBJECT Floorstanding WC combination 82126.0 Order no. 82126.0 Certified to DIN 1385-6 EN 33 Specification Washdown for 6-l-flush Outlet vertical 20,0 kg Accessories excl. Cistern, order no. 82616.0, 82621.3, 82621.8, 82806.0 Seat and cover, order no. 89021.0 Mounting acc. excl. Mounting set, order no. 89734.4 355 165 390 615 680 750 800 40 355 225 11.13

SET OBJECT Floorstanding WC combination 82126.9 Order no. 82126.9 Certified to EN 977, EN 33 Specification Washdown for 6-l-flush Outlet horizontal VARIO, vertical 70-130 mm 20,0 kg Accessories excl. Cistern, order no. 82616.0, 82621.3, 82621.8, 82806.0 Seat and cover, order no. 89021.0 Mounting acc. excl. Special elbow for vertical connection, order no. 89009.2 Mounting set, order no. 89734.4 355 165 390 615 670 750 800 40 355 185 145 70-130 11.14

SET OBJECT Cistern 82616.0 Order no. 82616.0 Certified to DIN 19542 matching for Floorstanding WC pan order no. 82126.0, 82126.9 Specification Flushing mechanisme GEBERIT water condensation insulation Dual-Flush (3/6-l-flush) Water inlet rear or side 11,0 kg Mounting set incl. Corner valve for water inlet 355 165 340 390 320 370 80 11.15

SET OBJECT Cistern 82621.3 Order no. 82621.3 Certified to China Standard matching for Floorstanding WC pan order no. 82126.0, 82126.9 Specification Flushing mechanisme DAL, Charge 290 Flush can be interrupted by pressing twice Water inlet bottom 11,0 kg 95 355 165 390 370 35 11.16

SET OBJECT Cistern 82621.8 Order no. 82621.8 Certified to Taiwan Standard matching for Floorstanding WC pan order no. 82126.0, 82126.9 Specification Flushing mechanisme GEBERIT, Charge 291 Dual-Flush (3/6-l-flush) Water inlet bottom 11,0 kg 95 355 165 390 370 35 11.17

SET OBJECT Cistern 82806.0 Order no. 82806.0 Certified to DIN 19542 KIWA matching for Floorstanding WC pan order no. 82126.0, 82126.9 Specification Flushing mechanisme DAL Flush can be interrupted by pressing twice Water inlet rear or side 11,0 kg Mounting set excl. Corner valve for water inlet 355 165 340 390 320 370 80 11.18

SET OBJECT Floorstanding WC pan 82146.0 Order no. 82146.0 Certified to EN 977, EN 37 Specification Washdown for 6-l-flush Outlet horizontal 12,5 kg Accessories excl. Seat and cover, order no. 89021.0 470 390 340 180 355 40 11.19

SET OBJECT Wallhung WC pan 82106.0 Order no. 82106.0 Certified to EN 977, EN 38 Specification Washdown for 6-l-flush 13,0 kg Accessories excl. Seat and cover, order no. 89021.0 180 40 530 100 225 135 40 400 20 355 15 11.20

SET OBJECT Seat and cover 89021.0 Order no. 89021.0 matching for Floorstanding WC pan order no. 82126.0, 82126.9, 82146.0 Wallhung WC pan order no. 82106.0 2,8 kg Mounting set included 11.21

SET OBJECT Floorstanding bidet 83076.1 Order no. 83076.1 Specification 1 centre tap hole 17,0 kg 50 100 390 195 565 355 150 260 11.22

SET OBJECT Floorstanding bidet 83076.3 Order no. 83076.3 Specification 3 tap holes 19,0 kg 50 100 390 195 565 355 150 260 11.23

SET OBJECT Wallhung bidet 83106.1 Order no. 83106.1 Specification 1 centre tap hole 16,0 kg Mounting acc. excl. Steel support, order no. 89900.0 Steel support, UK-Version, order no. 89900.1 Bolt caps, order no. 89263.1 180 40 100 120 325 210 125 400 565 20 355 150 215 11.24

SET BATHLINE

SET BATHLINE Washbasin 81015.4 Order no. 81015.4 Certified to DIN EN 32 Dimensions 600 x 460 mm Specification 1 centre tap hole 15,0 kg Accessories excl. Syphon cover, order no. 81915.1 Pedestal, order no. 81915.0 Mounting acc. excl. Mounting set, order no. 89988.2 280 280 460 200 200 200 50 50 80-120 850 80-120 ~850* 600 530 600 530 600 * = Effective height must be fixed according to the height of the pedestal. 12.1

SET BATHLINE Syphon cover 81915.1 Pedestal 81915.0 / SYPHON COVER Order no. 81915.1 matching for Washbasins order no. 81015.4 8,5 kg Mounting acc. incl. Device for fixing, order no. 89001.2 / PEDESTAL Order no. 81915.0 matching for Washbasins order no. 81015.4 7,0 kg 12.2

SET BATHLINE Floorstanding WC combination 82315.0 Order no. 82315.0 Certified to EN 997, EN 33 Specification Washdown for 6-l-flush Outlet vertical 20,0 kg Accessories excl. Cistern, order no. 82615.6 Seat and cover, order no. 89315.0 400 185 700 800 390 5 365 15 215 12.3

SET BATHLINE Cistern 82615.6 Order no. 82615.6 Certified to DIN 19542 matching for Floorstanding WC pan order no. 82315.0 Specification Flushing mechanisme GEBERIT water condensation insulation Dual-Flush (3/6-l-flush) Water inlet bottom 13,5 kg 250 400 185 405 45 12.4

SET BATHLINE Seat and cover 89315.0 Order no. 89315.0 matching for Floorstanding WC pan order no. 82315.0 Specification removable 1,95 kg Mounting set included 12.5

SET BATHLINE Floorstanding bidet 83015.1 Order no. 83015.1 Specification 1 centre tap hole 16,5 kg 50 100 185 585 395 360 150 280 12.6

ACCESSORIES UNIVERSAL

ACCESSORIES Shelf UNIVERSAL 87025.0 Order no. 87025.0 Dimensions 400 x 135 mm 2,0 kg TECHNICAL DRAWINGS / S 1 : 10 195* 60 135 35* 400 * = The exact measure must be determined at the installation. 13.1

ACCESSORIES Shelf UNIVERSAL 87025.2 Order no. 87025.2 Dimensions 500 x 135 mm 3,4 kg TECHNICAL DRAWINGS / S 1 : 10 255* 65 135 40* 500 * = The exact measure must be determined at the installation. 13.2

ACCESSORIES Shelf UNIVERSAL 87025.4 Order no. 87025.4 Dimensions 600 x 140 mm 3,4 kg TECHNICAL DRAWINGS / S 1 : 10 360* 65 140 50* 600 * = The exact measure must be determined at the installation. 13.3

ACCESSORIES Shelf UNIVERSAL 87025.5 Order no. 87025.5 Dimensions 650 x 145 mm 3,7 kg TECHNICAL DRAWINGS / S 1 : 10 405* 75 145 50* 650 * = The exact measure must be determined at the installation. 13.4

ACCESSORIES Toilet roll holder UNIVERSAL 87261.0 Order no. 87261.0 Dimensions 140 x 95 mm 0,8 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 : 10 95 140 95 13.5

ACCESSORIES Toilet brush holder UNIVERSAL 87368.0 Order no. 87368.0 Dimensions 105 x 180 x 90 mm 1,1 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 : 10 90 105 180 50 13.6

URINALS

URINALS Syphonic urinal TARO-NOVA 84000.0 Order no. 84000.0 Certified to DIN 1390 Water inlet concealed Outlet horizontal or vertical Flushing quantity minimum 1 l Flushing capacity minimum 0,3 l/s 20,0 kg Mounting acc. excl. horizontal inlet connection GEBERIT no. 119 692 order no. 89900.6 syphon with horizontal outlet GEBERIT no. 152.942.11.1, order no. 89497.4 syphon with vertical outlet and connection bend GEBERIT no.152.941.11.1, order no. 89903.8 Stone screws, order no. 89406.0 550 390 ø35 70 390 250 500 150 25 745 400 650 65 650 14.1

URINALS Syphonic urinal TARO-UNI 84000.5 Order no. 84000.5 Certified to DIN 1390 Water inlet external Outlet horizontal or vertical Flushing quantity minimum 1 l Flushing capacity minimum 0,3 l/s 20,0 kg Mounting acc. excl. vertical inlet connection GEBERIT no. 119 688, order no. 89900.7 syphon with horizontal outlet GEBERIT no. 152.942.11.1, order no. 89497.4 syphon with vertical outlet and connection bend GEBERIT no.152.941.11.1, order no. 89903.8 Stone screws, order no. 89406.0 ~40 ø9 ~280 ø35 55 390 90 390 550 250 150 25 745 400 720 65 650 14.2

URINALS Syphonic urinal KAPRUN 84005.0 Order no. 84005.0 Certified to DIN 1390 Water inlet external Outlet horizontal or vertical Flushing quantity minimum 2 l Flushing capacity minimum 0,3 l/s matching for Corner urinal COMO order no. 84412.0 16,5 kg Mounting acc. excl. Syphon with horizontal or vertical outlet, order no. 89415.3 vertical inlet connection GEBERIT no. 119 688, order no. 89900.7 mounting set no. 89406.0, Charge 063 50 380 375 640 320 610 ~1050 650 185 285 345 65 14.3

URINALS Syphonic urinal TAMARO 84009.0 Order no. 84009.0 Certified to DIN 1390 Water inlet concealed Outlet horizontal or vertical Flushing quantity minimum 1 l Flushing capacity minimum 0,3 l/s 21,5 kg Mounting acc. excl. horizontal inlet connection GEBERIT no. 119 692 order no. 89900.6 syphon with horizontal outlet GEBERIT no. 152.942.11.1, order no. 89497.4 syphon with vertical outlet and connection bend GEBERIT no.152.941.11.1, order no. 89903.8 Stone screws, order no. 89406.0 ø35 550 360 70 395 250 500 150 50 770 400 650 65 650 14.4

URINALS Syphonic urinal TAMARO-S60B 84010.0 Order no. 84010.0 / Charge 402 Certified to DIN 1390 Specification incl. control system GEBERIT for battery Water inlet concealed, 1/2 Outlet horizontal or vertical Flushing quantity minimum 1 l Flushing capacity minimum 0,3 l/s 23,0 kg Accessories excl. GEBERIT Service-Handy, order no. 115.830 GEBERIT Clean-Handy, order no. 115.831 Mounting acc. incl. Mounting acc. excl. brass inlet R 1/2, GEBERIT IR-electronic with 9V lithium battery syphon with horizontal outlet GEBERIT no. 152.942.11.1, order no. 89497.4 syphon with vertical outlet and connection bend GEBERIT no.152.941.11.1, order no. 89903.8 Stone screws, order no. 89406.0 180 395 360 470 30 550 1/2" 250 500 150 50 770 400 650 70 65 650 14.5

URINALS Syphonic urinal TAMARO-S60 84010.2 Order no. 84010.2 Certified to DIN 1390 Specification incl. control system GEBERIT for net Water inlet concealed, 1/2 Outlet horizontal or vertical Flushing quantity minimum 2 l Flushing capacity minimum 0,3 l/s 23,0 kg Accessories excl. GEBERIT Service-Handy, order no. 115.830 GEBERIT Clean-Handy, order no. 115.831 Mounting acc. incl. Mounting acc. excl. brass inlet R 1/2, GEBERIT IR-electronic with plug and power supply syphon with horizontal outlet GEBERIT no. 152.942.11.1, order no. 89497.4 syphon with vertical outlet and connection bend GEBERIT no.152.941.11.1, order no. 89903.8 Stone screws, order no. 89406.0 180 395 360 470 30 550 110 1/2" 250 500 150 50 770 400 650 70 65 650 14.6

URINALS Syphonic urinal TAMARO-VS 84012.2 Order no. 84012.2 Certified to DIN 1390 Specification incl. control system GEBERIT for main circuit connection Water inlet concealed, 1/2 Outlet horizontal Flushing quantity minimum 2 l Flushing capacity minimum 0,3 l/s 28,0 kg Accessories incl. Accessories excl. Control system with all mounting accessories concealed water inlet, horizontal outlet Concealed electric socket to urinal, order no. 89412.6 (To be installed by raw installation) 85 1/2" 70 390 670 650 75 400 825 120 658 258 100 365 395 200 14.7

URINALS Syphonic urinal CASA 84014.1 Order no. 84014.1 Certified to DIN 1390 Specification Only to be used with cover Water inlet concealed Outlet horizontal Flushing quantity minimum 2 l Flushing capacity minimum 0,3 l/s 10,0 kg Accessories excl. Cover for urinal, order no. 89414.1 Mounting acc. incl. Fixing srews, order no. 89553.8 Mounting acc. excl. Syphon with concealed outlet, order no. 89415.3 horizontal inlet connection GEBERIT no. 152 489, order no. 89009.7 465 285 305 1200 375 630 240 365 415 45 650 14.8

URINALS Cover for urinal CASA 89414.1 Order no. 89414.1 matching for Syphonic urinal CASA, order no. 84014.1 2,5 kg Mounting acc. included 14.9

URINALS Syphonic urinal CAPRINO 84406.0 Order no. 84406.0 Certified to DIN 1390 Specification Charge 400 with fly Water inlet concealed Outlet horizontal or vertical Flushing quantity minimum 2 l Flushing capacity minimum 0,3 l/s 12,1 kg Mounting acc. excl. Syphon with horizontal or vertical outlet, order no. 89415.3 horizontal inlet connection GEBERIT no. 152 489 order no. 89009.7 mounting set no. 89406.0, Charge 063 660 650 340 170 430 540 35 240 305 325 400 270 65 14.10

URINALS Syphonic urinal CAPRINO 84406.1 Order no. 84406.1 Certified to DIN 1390 Specification Charge 420 incl. control system WIMTEC for battery included Charge 400 with fly Water inlet external Outlet horizontal or vertical Flushing quantity minimum 2 l Flushing capacity minimum 0,3 l/s 12,1 kg Mounting acc. incl. only Charge 420 Syphon with horizontal or vertical outlet, order no. 89415.3 mounting set no. 89406.0, Charge 063 Mounting acc. excl. Syphon with horizontal or vertical outlet, order no. 89415.3 vertical inlet connection GEBERIT no. 119 688, order no. 89900.7 mounting set no. 89406.0, Charge 063 50 310 340 240 660 650 540 ~1000 400 270 325 65 14.11

URINALS Syphonic corner urinal COMO 84412.0 Order no. 84412.0 Specification Charge 400 with fly Water inlet external Outlet horizontal or vertical Flushing quantity minimum 2 l Flushing capacity minimum 0,3 l/s matching for Syphonic urinal KAPRUN, order no. 84005.0 14,0 kg Mounting acc. excl. Syphon with horizontal or vertical outlet, order no. 89415.3 vertical inlet connection GEBERIT no. 119 688, order no. 89900.7 Brackets, order no. 89840.0 65 50 90 185 285 450 610 ~1050 650 60 340 14.12

URINALS Urinal division RION 84760.0 Order no. 84760.0 14,0 kg Mounting acc. incl. Fixing device, order no. 89980.0 760 650 1380 400 590 730 35 80 14.13

SPECIAL ARTICLES

SPECIAL ARTICLES Washbasin for handicapped REHAB 81060.3 Order no. 81060.3 Dimensions 660 x 550 mm Specification without tap hole without overflow Special specification 1 centre tap hole 17,0 kg Mounting acc. excl. Mounting set, order no. 89988.2 Concealed syphon GEBERIT, order no. 151.112.21.1 280 850 550 60 195 190 165 50 660 300 625 625 15.1

SPECIAL ARTICLES Wall sink BERNINA 85421.0 Order no. 85421.0 Dimensions 505 x 510 mm Water inlet concealed Outlet concealed Flushing quantity minimum 8 l Flushing capacity minimum 2,1 l/s 25 kg Accessories excl. Grating, order no. 89947.0 Screws to grating, order no. 89949.0 300 75 85 120 ø55 60 505 510 625 710 ø102 300 350 590 30 15.2

SPECIAL ARTICLES School washbasin COLLEGE 85760.0 Order no. 85760.0 Dimensions 600 x 450 mm Specification without tap hole Special specification Charge 104 1 centre tap hole Charge 503 1 centre tap hole middle basin 20,5 kg Mounting acc. excl. Mounting set, order no. 89988.2 240 300 280 455 455 210 210 200 225 55 600 600 120 500 850 Charge 503 Charge 104 15.3

SPECIAL ARTICLES Wallhung WC for children BAMBI 82185.0 Order no. 82185.0 Specification Washdown for 6-l-flush Seating height 350 mm 14,0 kg Accessories excl. WC seat and cover, order no. 89065.7 180 55 525 220 320 355 60 350 65 320 15 15.4

SPECIAL ARTICLES Seat and cover BAMBI 89065.7 Order no. 89065.7 matching for Wallhung WC pan order no. 82185.0 1,3 kg Mounting set included 15.5

Technical catalogue

LAUFEN Austria ÖSPAG Österreichische Sanitär-, Keramik- und Porzellan-Industrie AG Färbergasse 11, P.O.Box 62 A - 3150 Wilhelmsburg Telephon ++43-2746-6060 Fax ++43-2746-6060-52 Internet: www.laufen.com