SpaceBuild Specification Worksheet GLPHASE System The GLPHASE SpaceBuilder system is ideal for medium-sized spaces that require additional options such as expansion modules for more load types, touch screens, additional sensors, and shade and AV integration. SpaceBuilder allows you to specify all the necessary features and operations for an autonomous lighting control system specifically designed for the needs of your space. Start by selecting the load types and accessories and finish by defining how each interface should function to control lighting levels, vacancy sensing, daylight harvesting, shades, and AV. System Components Options GLPHASE Available in or 8 zone versions to control both forward or reverse phase dimming loads. All GLPHASE systems can be expanded to easily add more zones of lighting. Keypads Up to keypads can be added to a GLPHASE space. Refer to page for standard sequence of operations to specify the button operations and standard engravings. Occupancy Sensors Up to dual technology occupancy sensors can be added to each GLPHASE space for both occupancy and vacancy sensing. Each sensor offers coverage for spaces up to,000 square feet. Daylight Sensors Up to open-loop daylight sensors can be added to each GLPHASE space for daylight harvesting control. Touch Screens An optional 7 color touch screen can be added to each to provide the user with full scene control, dynamic load control, and schedule adjustments. Loads Any system can be expanded to include additional loads for 0-0V, switching, phase control, or switched plug loads. AV Integration The GLPHASE system can easily integrate with AV systems by adding a serial control module. If this option is selected, Crestron will also supply prepackaged code for the AV contractor to connect the systems. Shade Integration Integrate with Crestron, Mecho, and other leading shading solutions. Control for up to local shade motors can be included with each GLPHASE system. Networking Any Crestron SpaceBuilder system can be networked to provide centralized monitoring, management, and master control. This includes direct integration with BMS and reporting, alerts, global time clock management, and maintenance and automation via Crestron Fusion. 0 Crestron Electronics, Inc. WS_0_0 Page of
Specification Worksheet GLPHASE System GLPHASE SpaceBuilder Load Schedule Zone # Zone Description Fixture Tag Circuit # Voltage Load Type Emergency / Life Safety Dim (Y/N) Fixture Watts Quantity Total Watts Example Downlights A H- 0 VAC Reverse Phase Dimmed N/A Yes 00 7 8 0 VAC -Wire Forward Phase Dimmed Reverse Phase Dimmed N/A Partial Zone Complete Zone Yes No PACKAGE KEYPADS OCCUPANCY SENSORS S GLPHASE - KP - KP - KP - KP - OS- DS-...FWD. OR REV. PHASE ZONES 8...FWD. OR REV. PHASE ZONES BLANK...NO KEYPADS A...KEYPAD A B...KEYPAD B C...KEYPAD C D...KEYPAD D Please contact Crestron to add more than keypads E...KEYPAD E F... KEYPAD F G...KEYPAD G H...KEYPAD H X...CUSTOM KEYPAD SOO BLANK...NO SENSORS... SENSOR... SENSORS... SENSORS... SENSORS BLANK...NO SENSORS... SENSOR... SENSORS... SENSORS... SENSORS TOUCH SCREEN SHADE QUANTITY SHADE MOTOR TYPE AV - - - BLANK...NO TOUCH SCREEN TS... 7 TOUCH SCREEN BLANK...NO SHADES... SHADE... SHADES... SHADES... SHADES BLANK...NO SHADES RS...RS-/CONTACT RLY... 0V RELAY...CRESTRON QMT MOTOR BLANK...NO AV AV...RS- AV INTERFACE COLOR NETWORKING ADD A ZONE - - BLANK...WHITE BLK................................................BLACK ALMD...ALMOND BLANK...STAND-ALONE SPACE NET...NETWORKED SPACE BLANK... NONE PL...0A 0V PLUG Example: GLPHASE - AKP - DKP - OS - DS - TS - AV - NET - PL 0 Crestron Electronics, Inc. WS_0_0 Page of
UP DOWN NET NET Y Z G Y Z G -SDC UP DOWN PWR NET SETUP HI LO NET ID RELAY COM NET Y Z G Y Z G S G IR -IO PWR NET SETUP Specification Worksheet GLPHASE System GLPHASE SpaceBuilder Schematic Riser TO BUILDING LAN (F.B.O) FOR INTERSYSTEM ETHERNET COMMUNICATIONS REMOTE & LOCAL PROGRAM UPS 7" TOUCH SCREEN OVERCURRENT PROTECTION 0A (MAX) BY OTHERS (QTY. ) 0 VAC ONLY BRANCH CIRCUIT GLPHASE TYPE: TYPE: TYPE: TYPE: TYPE: TYPE: TYPE: GLS-ODT-C- OS- DWG. #: GLS-ODT-C- DS- GLS-ODT-C- OS- DWG. #: GLS-ODT-C- DS- GLS-ODT-C- OS- DWG. #: GLS-ODT-C- DS- GLS-ODT-C- OS- DWG. #: GLS-ODT-C- S CONNECT TO INPUTS ON KEYPADS OR OCCUPANCY SENSORS. IF INSUFFICIENT INPUTS ARE PRESENT ON THE PROJECT, GLS-SIM INTERFACES WILL BE ADDED. DS- TYPE: FEED: 0VAC TO DEVICES SHADE/DRAPE/SCREEN # SHADE/DRAPE/SCREEN # RS- TO A/V SYSTEM CABLE TYPES: (NOT ALL TYPES ARE USED ON ALL PROJECTS) -CBD-P -8 S CKP- DWG. #: -CBD-P -CBD-P -8 S CKP- DWG. #: -CBD-P -CBD-P -8 S CKP- DWG. #: -CBD-P -CBD-P -8 S CKP- DWG. #: -CBD-P 0VAC (WITH PHASE CONTROL) CRESNET 0-0V DALI ETHERNET SENSOR (CRESNET OR -#8) ALL LOW-VOLTAGE CABLE RUNS ARE CRESNET UNLESS OTHERWISE NOTED. -SDC SDC- DWG. #: -SDC 0 Crestron Electronics, Inc. WS_0_0 Page of ADD A ZONE -IO AV- DWG. #: -IO
0 KEYPAD TYPE A ON OFF 0 KEYPAD TYPE B 8 -CBD-P PART #: -CBD-P MODIFIED DESCRIPTION: LAYOUT & ENGRAVING -CBD-P M 007 DATE: REVISION: /0/0 007 UPDATE AVAILABLE S- NOTES: OTHER UPDATE S AVAILABLE NOT S RENUMBERED RENUMBERED Volvo DESCRIPTION: Drive Rockleigh REVISION: NJ 077 Tel: 888-7-787 Fax: 0-77-0 www.crestron.com 8 Button Functionality: ON Turn all lights on and enable daylight harvesting If daylight sensor is not present, lights will turn on to 00% Button Functionality: OFF Turn all lights off to 0% and disable daylight harvesting Button Functionality: DEVICE: ON Button Functionality: ON Turn all lights on -CBD-P and enable daylight CAMEO harvesting ON Turn all lights on and enable daylight harvesting ON If daylight sensor KEYPAD is not present, lights will turn on to 00% If daylight sensor is not present, lights will turn on to 00% E S AS A GUIDE Press and hold TO will "MODIFIED" raise FILL all dimmable OUT LAYOUT lighting THE MODIFIED KEYPAD LAYOUT Button Functionality: & ENGRAVING Button FORMS Functionality: OFF ON THE NEXT PAGE Dim lights up VE BEEN REMOVED OFF FROM THIS SHEET, Turn all BUT lights off DRAWING: to 0% NUMBERS and disable ARE daylight UNCHAINED harvesting TO MAINTAIN COMPATIBILITY WITH OLDER Button SHEETS. Functionality: Press and hold will OF lower all dimmable lighting OFF Dim lights down 8 7 8 Specification Worksheet GLPHASE System Office, Restroom, Storage/Utility Room, Corridor, Basic Classroom -CBD-P PART #: Volvo Drive Rockleigh NJ 077 Tel: 888-7-787 Fax: 0-77-0 www.crestron.com DEVICE: -CBD-P CAMEO KEYPAD "MODIFIED" LAYOUT DRAWING: OF NOTES: GLPHASE SpaceBuilder Sequence of Operations 7 KEYPAD TYPE C ON OFF DIM KEYPAD TYPE D 7 9 Button Functionality: ON Turn all lights on and enable daylight harvesting If daylight sensor is not present, lights will turn on to 00% Button Functionality: OFF Turn all lights off to 0% and disable daylight harvesting Button Functionality: DIM Toggle to dim load up and down 7 7 0 8 PLEASE USE THESE S AS A GUIDE T ENGRAVING FORM NOTE THAT SEVERAL S HAVE BEEN REMOVED FROM THIS SHEET, BUT S Button Functionality: OFF Turn all lights off to 0% and disable daylight harvesting Continued on page 7 B ST B ST B ST 0 Crestron Electronics, Inc. WS_0_0 Page of
Specification Worksheet GLPHASE System GLPHASE SpaceBuilder Sequence of Operations, Continued 7 KEYPAD TYPE E 7 8 Office, Conference Room, Cafeteria, Library, Multipurpose Room, Lobby, Ballroom 9 KEYPAD TYPE G 7 0 :, Applications where dimming and switching both exist and need separate control BUT STYL ON SCENE SCENE SCENE OFF Button Functionality: ON Turn all lights on and enable daylight harvesting If daylight sensor is not present, lights will turn on to 00% Button Functionality: SCENE Recalls scene settings with feedback Button Functionality: SCENE Recalls scene settings with feedback Button Functionality: SCENE Recalls scene settings with feedback Button Functionality: OFF Turn all lights off to 0% and disable daylight harvesting DIMMING ON / OFF SWITCHING ON / OFF -CBD-P KEYPAD ENGRAVING SHEET MODIFIED KEYPAD LAYOUTS Button Functionality: DIMMING ON/OFF Toggle dimmable zones on or off with feedback if any lights are on Toggle to turn daylight harvesting on or off If daylight sensor is not present, lights will turn on to 00% Button Functionality: Dim lights up Button Functionality: Dim lights down Button Functionality: SWITCHING ON/OFF Toggle dimmable zones on or off with feedback if any lights are on 9 0 PART #: -CBD-P -CBD-P KEYPA MODIFIED KE BUT STYL KEYPAD TYPE F KEYPAD TYPE H :, Applications where shades control is needed PLEASE USE THESE S AS A GUIDE TO Button Functionality: ALL ON Button Functionality: ALL ON ON ON Turn all lights on and enable daylight harvesting Turn all lights on and enable daylight harvesting ENGRAVING FORMS SCENE If daylight sensor is not present, lights will turn on to 00% SCENE NOTE THAT If daylight SEVERAL sensor S is not present, HAVE lights BEEN will REMOVED turn on to 00% FROM THIS SHEET, BUT STY SCENE Button Functionality: SCENE SCENE Button Functionality: SCENE SCENE Recalls scene settings with feedback ALL OFF Recalls scene settings with feedback ALL OFF Button Functionality: SCENE SHADES Button Functionality: SCENE Recalls scene settings with feedback Recalls scene settings with feedback 7 8 Button Functionality: SCENE Button Functionality: ALL OFF Recalls scene settings with feedback Turn all lights off to 0% and disable daylight harvesting Button Functionality: ALL OFF Button Functionality: SHADES 7 Turn all lights 7 off to 0% and disable daylight harvesting 7 8 7 Activates up 7 and down arrows to control shades. 7 7 BUTT After seconds of 8 inactivity, up and down arrows 8 revert 9 Button Functionality: back to dimming lights up and down. Dim lights up DE Button Functionality: C Button 7 Functionality: KE Dim lights up (shades up when SHADES button is active) S AS A GUIDE Dim lights TO down FILL OUT THE MODIFIED KEYPAD LAYOUT & "M Button 7 Functionality: ENGRAVING FORMS ON THE NEXT PAGE Dim lights down (shades down when SHADES button is active) BEEN REMOVED FROM THIS SHEET, BUT NUMBERS ARE UNCHAINED TO MAINTAIN COMPATIBILITY WITH OLDER SHEETS. DR KEYPAD TYPE X All applications needing a custom keypad button configuration and functionality Custom Keypad SOO 7 7 BUTT Date: Project: 0 Crestron Electronics, Inc. WS_0_0 Page of BUTT
Specification Worksheet GLPHASE System GLPHASE Specifications RATINGS Dimmer Channels DIN-DIMU: Maximum Per Channel Amps @ 0 to 0 Volts AC, 0/0 Hz 00 Watts @ 0 Volts AC 0 Watts @ 0 Volts AC 00 Watts @ 0 Volts AC Load Types Forward Phase (leading edge) or Reverse Phase (trailing edge) Electronic Low Voltage, Incandescent, Neon/Cold Cathode, Magnetic Low Voltage, Dimmable Wire Fluorescent, and Non-Dim Lighting ENCLOSURE Surface mount metal box enclosure, suitable for mounting in plenum airspace Width.7 in ( mm) Depth.8 in ( mm) ELECTRICAL REGULATORY CERTIFICATIONS Relays tested and certified for Electronic Ballasts according to UL08, Section (Endurance Test) and Section C (Electronic Ballasts) IEC09--, Section 9.0 (Contact mechanisms incorporated in electronic switches, intended for fluorescent lamp circuits or other capacitive loads) CEC Title 0 Compliant channels of forward or reverse phase dimming Auto load detection 0 to 0 Volt 0/0 Hz operation ENVIRONMENTAL Temperature to 0 F (0 to 0 C) Humidity 0% to 90% RH (non-condensing) DIMENSIONS Height. in (97 mm) Products in this system can include: DIN-DIMU: Channel Universal Dimmer GLS-ODT-C-: Dual Technology Ceiling Mount Occupancy Sensor GLS-LOL: Open Loop Daylight Sensor TSW-70: 7 Touch Screen -CBD: Keypad For technical specifications on all other products in this system, please visit www.crestronlighting.com For more information or to access digital specification forms for all Crestron SpaceBuilder systems, visit www.crestronspacebuilder.com or call 8--7 0 Crestron Electronics, Inc. WS_0_0 Page of