REVISION HISTORY REV DESCRIPTION SUB DATE APPROVED F Update color from Cool Gray Pantone to Black QA 06/06/2014 QA E Correct model from GTM91099-6012-T2 to GTM91099-6015-3.0-T2 QA 04/17/2014 QA D Updating spec to reflect cool gray pantone color bsiep 08/21/2013 QA In Addition to GlobTek Inc.'s renewed ISO9001:2008 - Quality Management System Certification, GlobTek Inc. is now certified to: ISO13485:2003 - Medical Devices Quality Management System Certification ISO14001:2004 - Environmental Management System Certification ISO Certificates are available On-Line at http:///iso-certificates.php Customer Approval of Specification: Please approve, sign and send back to GlobTek so we can complete order processing. A delay in receipt of this form will delay delivery schedule. Company Name: Customer P/N: Quote Number: Date: Authorized Representative Name: Authorized Representative Signature: Footnote: GlobTek Inc. will not be liable for the safety and performance of these power supplies if unauthorized access and repair occurs. End user should consult applicable UL, CSA or EN standards for proper installation instruction. Limitation of Use: GlobTek product are not authorized for use as mission critical components in life support hazardous environment, nuclear or aircraft applications without prior written approval from the CEO of GlobTek Inc. Contents of this document are subject to change without prior notice. GTM91099-6015-3.0-T2, 60W, 12V@5.0A, Wall Plug-in+Desktop Combination, Regulated Switchmode AC-DC Page 1 of 11
POWER SUPPLY INFORMATION TYPE: Wall Plug-in+Desktop Combination TECHNOLOGY: Regulated Switchmode AC-DC CASE COLOR: GlobTek Black NAMEPLATE RATED INPUT: 100-240V~, 50-60 Hz, 1.5 A INPUT CONFIG: Interchangeable Blades WATTS: 60.0 VOLTS OUT: 12 CURRENT OUT (Amps): 5.0 BLADE/CORD INCLUDED: None: (Order Separately) BLADE/CORD INSTALLED: None: (Order Separately) EFFICIENCY LEVEL: V OUTPUT CONFIGURATION CONNECTOR PIN OUT: LABEL SPECS: PACK SPEC: NOTES / DEVIATIONS: 1200 mm, 16/1C + Shield Cond, UL 1185, Female Barrel 5.5 * 2.5 * 11mm with no internal Spring Clip and Locking Notch or Equal, Ferrite: None, GlobTek Black, GT Cord # C0408 Center Positive (+V) Standard GT,L-1186 Standard WPI, Individually Box DIMENSIONS ARE IN MM UNLESS SPECIFIED OTHERWISE. ELECTRICAL SPECIFICATIONS A) ELECTRICAL SPECIFICATIONS: 01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac 02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz 03. Output Regulation: +/- 5% nominal output voltage measured at the output connector at nominal line 04. Line Voltage Regulation: +/- 2% max at full load 05. Output Ripple (Vp-p): +/-1% or 150mV whichever is greather at nominal output voltage. Measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector. 06. Turn-ON/OFF Overshoot: 5% max, 500uS max recovery time for 25% to 50% step load 07. Turn-ON Delay: 2 Seconds, maximum @ full load, nominal line 08. Hold-Up Time: 8 ms at nominal input and full load 09. Inrush Current: 40A max at cold start 120 VAC, 60A max cold start 230VAC 10. Switching Frequency: 100 KHz typical B) PROTECTION 1. Over-Voltage: Protected, Hiccup with auto recovery 2. Short Circuit: Protected, Hiccup with auto recovery 3. Over-load: Protected, Hiccup with auto recovery 4. Input Protection: Input line and neutral fusing 5. Means of Patient Protection: (2 x MOPP) C) SAFETY 01. Dielectric Withstand Voltage: 5656Vdc from primary to secondary 02. Touch Current: Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition) 03. Means of Protection: 2 x MOPP 04. Primary to Secondary Bridging Capacitor: (2) * Y1 type capacitors in series D) OTHER: 1. MTBF: 200,000 Hours @ 25 C ambient temperature 2. Operating Temperature: 0 C to 40 C ambient temperature 3. Humidity: 0% to 90% relative humidity 4. Storage Temperature: -10 C to 80 C Page 2 of 11
5. Cooling: Convection E) ENCLOSURE 1. Housing: High impact plastic, 94V0 polycarbonate, non-vented 2. Size: 117.53*53.47*36.6 mm +/- 1.0 3. Markings: Label and/or Pad Printed and/or Molded into Case 4. LED: Standard Green color to indicate power on Page 3 of 11
INPUT CONFIGURATION Blades/Cord Included: None: (Order Separately) Blades/Cord Installed: None: (Order Separately) IEC 60320/C8 AC Inlet connector Mates with IEC 60320/C7 Plug Optional INPUT BLADES: R-Socket: below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "R-KIT" if specified 1. Class II model NEMA 1-15P AC power plug with 2 prongs, R-NA-2(R) 2. Australian AS 3112 configuration: SAA 2 pins Class II, R-SAA-2(R) 3. UK BS 1363 configuration: UK 2 pins (dummy Ground) Class II, R-UK-2(R) 4. European CEE 7/16 configuration: Europlug 2 PINS, Class II, R-EU-2(R) 5. Desktop Insert Kits 05. R-KIT: 1,2,3,4 above 06. R-KIT-INTL: 2,3,4 above Standard Cordsets Below are standard cordsets which are "not included" (unless stated above); these can be purchased separately or packaged with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material. GT P/N Length Country Description 4511116F703A(R) 6 FT North American 2 COND: SPT-2, 18/2, 6, BLACK, UL/CSA, NEMA 1-15P to IEC 320/C7 Page 4 of 11
2074112M8703A(R) 2 M European 2 COND: H05VVH2F, 2X0.75, 1.8M, VDE, S, N, D, ect., CEE 7/16 to IEC 320/C7 5014112M703A(R) 2 M Australia 2 COND: H05VVH2F, 2X0.75, 2M, SAA, AS3112 to IEC 320/C7 451J3401M8703A(R) 2 M Japan 2 COND: VFF, 2X0.75mm2, 1.8M, PSE, JIS8303 to IEC 320/C7 6104112M703A(R) 2 M UK/Ireland 2 COND: H03VVH2F, 2X0.75, 2M, BSI, BS1363 to IEC 320/C7 2074112M8703A(R) 2 M Swiss 2 COND: H03VVH2F, 2X0.75, 1.8M, SEV, CEE 7/16 to IEC 320/C7 2074112M8703A(R) 2 M Italy 2 COND: H03VVH2F, 2X0.75, 1.8M, IMQ, CEE 7/16 to IEC 320/C7 2074112M8703A(R) 2 M Demark 2 COND: H03VVH2F, 2X0.75,1.8M, D, CEE 7/16 to IEC 320/C7 2084111M8703(R) 2 M India/ Africa 2 COND: H05VVF 3x0.75, 1.8M, BS546 to IEC 320/C7 (YL-H03VVH2-F) 4533501M8703(R) 2 M China 2 COND: RVV (227IEC52), 2X0.75mm2, 1.8M, CCC, GB2099.1 (1996) to IEC 320/C7 Page 5 of 11
OUTPUT CORD AND CONNECTOR: LCL1/C0408 ACTUAL CONNECTORS, OVERMOLDS, FERRITES MAY VARY SLIGHTLY FROM THE PICTURE BELOW CABLE TYPE UL 1185 CABLE LENGTH (mm) 1200 CABLE TOLERANCE (mm) +100,-0 WIRE GAUGE (AWG) 16 CONDUCTORS 1C + Shield HANK DIMENSION (mm) 100 +/-10 CABLE / CONNECTOR OVERMOLD COLOR FERRITE TYPE / DIMENSION FERRITE # OF TURNS FERRITE DIMENSION FROM STRAIN RELIEF FERRITE DIMENSION FROM PLUG PLUG TYPE OVER MOLD ORIENTATION CONNECTOR PIN OUT: ADDITIONAL REQUIREMENTS GlobTek Black None N/A N/A N/A Female Barrel 5.5 * 2.5 * 11mm with no internal Spring Clip and Locking Notch or Equal Straight Center Positive (+V) ADDITIONAL OUTPUT PLUG OPTIONS ARE AVAILABLE AT http:///connectors.php STANDARD PLUGS AND CONNECTORS CAN BE SEEN ONLINE AT http:///connectors.php Page 6 of 11
LABEL:L-1186 LABEL P/N: Standard GT MATERIAL: Flat Thermal Transfer, Imprintable, Polyester Label and/or Pad Printed and/or Molded in the case BACKGROUND COLOR:Black TEXT COLOR: White or Silver LABEL WIDTH (mm): 44.5 LABEL HEIGHT (mm): 49.5 Below is the minimum information which will appear on the label. NOTE: in the logo area additional/actual positioning of symbols and text is subjected to change as per agency updates/requirements or additional model approvals become available. Agency logos may be in Logo area on the label or molded into the case housing outside the label area. Information will be shown via Label and/or Pad Printed and/or Molded in the case A=Medical Power Supply & ITE Power Supply B=P/N: ( 料 号 ) RR9KE5000LCP-C-IM(RV C=Model:( 型 号 ) GTM91099-6015-3.0-T2 D=Input:( 输 入 ) 100-240V~, 50-60 Hz, 1.5 A E=Output:( 输 出 ) 12 V = = = 5.0 A AGENCY ONLINE DOCUMENTS http://www.globtek.info/certs/gtm91099/ IPXY rating is based on 3rd party testing and customers should check suitability and test system level IPXY rating before ordering. Logo Approvals Logo Description Attention Mark / Refer to operating manual for operating and service instructions Book 60335 up to 36 Volts 60601-1 3rd Operating Instructions No Logo Applicable CB report IEC 60601-1: 2005 + CORR. 1 (2006) + CORR. 2 (2007) and or EN 60601-1:2006 3rd Edition 2xMOPP Page 7 of 11
CCC certificate: GB4943.1-2011 GB9254-2008 GB17625.1-2012, 仅 适 用 于 在 海 拔 2000m 以 下 地 区 使 用 CE Certification Class II CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15 B CE Mark: tested to comply with Additional EN610006-1:2007, EN610006-2:2005 EN61000-6-3:2007+A1:2011 EN61000-6-4:2007+A1:2011 CE Mark: tested to comply with EN 60601-1-2:2007 Medical electrical equipment Part 1-2: - Mark is on the label or Molded in the case CHINA SJ/T 11363-2006, China RoHS Chart: http://en.globtek.com/globtek-rohs.php cruus UL Recognized Component E341350 3rd Edition w-rm ANSI-AAMI ES60601-1 (2005 + C1:09 + A2:10) and CAN-CSA-C22.2 No. 60601-1 (2008) Double Insulation - Mark is on the label or Molded in the case No Logo EC-Conformity Declaration: http:///html/iso_certificates/ec-declaration.pdf, REACH 144 SVHC: http:///html/iso_certificates/reach144.pdf GOST-R mark for Russia (Document: http:///html/iso_certificates/gt_gost-r.pdf) IEC/EN60335-1 Up to 36 volts IEC/EN60601-1 IEC/EN60950-1 Indoor Use Only - Mark is on the label or Molded in the case IP40 IP52 OPTIONAL LPS Ingress Protection: IP40 to IEC60529:2001 Protection against granular foreign bodies Ingress Protection: IP52 to IEC60529:2001 Protected against dust - limited ingress (no harmful deposit) and Protected against direct sprays up to 15 degrees from the vertical Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe) Limited Power Source NEMKO JAPAN PSE CQC Globtek Inc TO J60950 AND J55022 RoHS 2 RCM N136; Australia and New Zealand Regulatory Compliance, Mark ( http://rcm.standards.org.au/rcmfaq/rcmfaq.htm RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/rohs%20final.pdf Serial Number Information 1O139 Ukraine UKRSepro (Document: /html/iso_certificates/gt_ukraine.pdf) Page 8 of 11
UL cruus Registered E341350 UL culus LISTED 4MU8 E341351 Center Positive (+V) Japan: Voluntary Control Council for Interference (VCCI) WEEE: Complies with EU 2012/19/EU ( http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case Page 9 of 11
PACKAGING Packing Spec P/N: Standard WPI, Individually Box Box Qty: 45.0 Gift Box Size (mm): 142*62*60 Gift Box Color: White Master Carton Size (mm): 438*295*205 Master GW (Kg): 15.2 kg BLADES INCLUDED: None: (Order Separately) BLADE/CORD INSTALLED: None: (Order Separately) If specific packaging is required, this section must specify all requirements and note no exceptions. If this section does not specify packaging, it is subject to change without notice at GlobTek s discretion Page 10 of 11
INSTRUCTION SHEET N/A Page 11 of 11