Intelligent Infrastructure Management System

Intelligent Infrastructure Management System

System Overview AMPTRAC Hardware Overview Unused Port Patched Port AMPTRAC System and Components AMPTRAC Basic Operating Principle Robust th wire in patch cords establishes open and closed circuits which can be monitored Analyzer monitors open/closed circuit and tracks connectivity Analyzer sends data to AMPTRAC IM Software data base AMPTRAC Analyzer: The Device that tracks the connections between sensor contacts and communicates with AMPTRAC IM Software database AMPTRAC I/O cables: Connect sensor contacts (patch panel and electronics) to analyzer AMPTRAC Patch Panels: Patch panels with integrated sensor contacts AMPTRAC Sensor Strips: Sensor contacts that are applied to network electronics port fields AMPTRAC Patch Cords: Interconnect between patch panel & switch ports and have an integrated 'th' wire that is used to make connection between sensor contacts M Software: Software programmed by itracs, manages the analyzers and correlates the connectivity information from the analyzers to a database model of the customer infrastructure AMPTRAC Server: A higher level PC (often Rack mounted) that runs the IM Software Physical Layer Easily Added to CMDB http: /www.ampnetconnect.eu

Analyzers AMPTRAC Analyzers The Analyzer discovers connects/disconnects and communicates the port ID information in real-time to the AMPTRAC database software over a TCP-IP connection. When a patch cord is inserted or removed from a port, the AMPTRAC sensory circuit immediately notifies the database software to update and document the change in connectivity. This provides network administrators responsible for small to enterprise wide multi-site networks, with vital time saving up to-the minute information about the status of their network from the hardware layer up. Any change in connectivity can be checked and authorization verified, and if appropriate, action taken if the action is unauthorized. To gain all this information every port on patch panels and switches is equipped with a sensor pad. All sensor pads are connected to the analyzer via I/O cables. To connect the diverse monitored devices ten different I/O cable types are available (see page 6). All products in this catalog that need I/O cable connection to analyzer are marked with one or more red numbers (e.g. ) determining type and quantity of the needed I/O cables (see page 6). Adds the physical layer to your network documentation system Universal analyzer design Analyzer can be configured as a master or slave unit Any unit can directly communicate to database server or through another analyzer Virtually unlimited in number of ports/drops which can be monitored Very flexible design and implementation allowing for use in office buildings, data centers and remote/branch offices Analyzers sold with AMPTRAC IM Software license (see next page for description of software) Available in 6 port and 68 port versions (, U) Shallow depth at 6.5" (60 mm) Suitable for shelve or " rack or cabinet mounting Secured, keyed and reliable DB5 connection for I/O cables Large 4 line LCD display providing interactive communications with the database Three 0/00BASE-TX Ethernet ports provided ( in front, in rear) to provide connection to LAN and server as well as allow analyzer to communicate via another analyzer Use of latest and current circuitry design Minimum heat dissipation no concerns over heat management in rack or cabinet Low power consumption and long lifetime Description Ports Monitored With Year SLA With itracs IM Software Part Number Analyzer with LCD (div. Power Cords) 6-50-X Analyzer with LCD (div. Power Cords) 68 4-50-X year extended warranty for analyzer n/a -506-0 NOTE: A complete channel connection to a work area outlet passes through two monitored ports, the network equipment (switch) and the patch panel. Therefore, each active channel monitored requires two analyzer ports. International Power Supplies: All products are supplied with the required power cord. To specify the correct power cord for your country substitute the number below for the -x suffix in the order code.the most common types are shown below international types also available on request. European Standard Suffix: - Great Britain and Ireland Suffix: -7 India Suffix: -8 www.ampnetconnect.eu

Software AMPTRAC Infrastructure Management Software Fully automated documentation system Real time monitoring Automatic database update on changes Self-discovers patch cords Event logs and data base reports Programmable alerts Automated work order processing Auto-discovers IP devices Automatic re-synchronization on power outages User management Supports ITIL best practices ISO 0000 and BS 5000 compliant CSV data import Easy to use and intuitive menu structure Upgradeable to iplm incl. API and SDK Enterprise Display Data Store Information AMPTRAC Infrastructure Manager (IM) Software has been primarily designed for customers of AMP NETCONNECT products, as it functions in tandem with AMPTRAC hardware. The software is designed to explore, discover and map the connectivities of the customer network. It is further designed to simplify the process of all future moves, adds and changes (MACs) of end-users. The software allows simultaneous access by a spectrum of department representatives; these include help desk, planning, network administration, supervision and technicians. The AMPTRAC Infrastructure Manager System creates an automated, accurate, real-time physical layer management system. This combined system proactively responds to changes in connectivity and intelligently records your cabling system and its devices with accurate documentation. You reduce costs by eliminating timeconsuming manual work order processes. You also maximize your existing network investment by identifying underutilized assets. AMPTRAC IM Software is ideally suited to customers with complex data/telecom networks and critical applications. Examples include financial institutions, insurance providers, data centers, high security government facilities, military defense facilities, airports, medical centers, universities and corporate headquarters. These customers and clients share the difficult management of complicated networks, requiring accurate record-keeping, high security, and frequent MACs. The simplification of the work order process also provides valuable benefits to client networks of any size, from small to enterprise network. Switch and Patchpanel ports in closet view Work Area indicated in graphic view Circuit trace from end-to-end and all points in between Custom views based on job responsibilities Description Part Number AMPTRAC IM Software with one-year Gold Plus Service Level Agreement sold with Analyzer AMPTRAC IM Software Concurrent User Pack (5 additional users) 0-477- AMPTRAC Single Port IM Software Gold Plus Service Level Agreement Extension -4777- www.ampnetconnect.eu

TP Patch Panels Standard Cat. 6 AMPTRAC PCB Patch Panels, U, RJ-45 patch panel with 4 ports AMPTRAC Ready! version: prepared for AMPTRAC upgrade Full AMPTRAC version: fully equipped with AMPTRAC functionality Up to 0 GBit/s (shielded version) LSA+ tool compatible enhanced 0 IDC blocks Universal wiring T568 A or B wiring pattern Front and rear I/O cable connection Description Color Part Number I/O Cable(s) Shielded Cat. 6 Full AMPTRAC 4 port patch panel black (RAL 005) 0-64404- Shielded Cat. 6 AMPTRAC Ready! 4 port patch panel black (RAL 005) 0-64404- Shielded Cat. 6 AMPTRAC Ready! 4 port patch panel light grey (RAL 705) 0-64404- Unshielded Cat. 6 Full AMPTRAC 4 port patch panel black (RAL 005) 0-747- Unshielded Cat. 6 AMPTRAC Ready! 4 port patch panel black (RAL 005) 0-747- AMPTRAC Upgrade Kit with front I/O port black 0-748- AMPTRAC Upgrade Kit with rear I/O port black 0-748-4 Unloaded AMPTRAC SL Jack Patch Panels, U, unloaded flushmount patch panel to be equipped with up to 4 SL Jacks AMPTRAC Ready! version: prepared for AMPTRAC upgrade Full AMPTRAC version: fully equipped with AMPTRAC functionality AMPTRAC functionality not applicable for jacks with dustcover Description Color Part Number I/O Cable(s) Full AMPTRAC Cat. 7 A S unloaded patch panel black (RAL 005) 0-774- Full AMPTRAC Cat. 6 unloaded patch panel black (RAL 005) 0-7685-4 AMPTRAC Ready! unloaded patch panel black (RAL 005) 0-7685- AMPTRAC Ready! unloaded patch panel light grey (RAL 705) 0-7685- AMPTRAC Cat. 7 A S Upgrade Kit with rear I/O port black (RAL 005) 0-774- AMPTRAC Cat. 6 Upgrade Kit with front I/O port black 0-748- AMPTRAC Cat. 6 Upgrade Kit with rear I/O port black 0-748-4 AMPTRAC ready Hi-D UTP Cat. 6 black -676- AMPTRAC ready Hi-D STP Cat. 6 black -676- STP/UTP SL 0C Jack Patch Panels (w/o Rear Cable Management) Available in standard straight version or in angled version for improved cable and space management Uses AMP NETCONNECT high-performance SL Series 0C Modular Jacks I/O connection made with 0C Plug'n'Play cable assembly Cost-effective AMPTRAC ready solution: install AMPTRAC patch panels now and analyzer and software later Cat. 6 patch panels come with Modular Jacks bagged separately (unloaded) for field termination with SL Series Modular Jack Termination Tool. Description Type Height Part Number I/O Cable(s) Unshielded Cat. 6, 4 port panel Straight U 0-7- Unshielded Cat. 6, 48 port panel Straight U 0-8- Unshielded Cat. 6, 4 port panel Angled U 0-- Unshielded Cat. 6, 48 port panel Angled U 0-0- Shielded XG 4 Port Panel Straight U 0-- Shielded XG 48 Port Panel Straight U 0-- Shielded XG 4 Port Panel Angled U 0-- Shielded XG 48 Port Panel Angled U 0-4- www.ampnetconnect.eu

TP Patch Panels Application Specific AMP CO Plus Patch Panels, patch panel for AMP CO Plus inserts (inserts sold separately) Performance up to,0 GHz Straight cable exit plus management bar Kit includes shielded housings, edge connectors, frames and mounting material incl. grounding bolt Description Max. AMPTRAC ports Height Part Number 8 insert panel 6 U 0-4576-X 6 insert panel U 0-457-X insert panel 64 4 U 0-4575-X 4 insert HD panel 48 U 0-4574-X Description Height Part Number I/O Cable(s) ACO upgrade kit for 8 insert panel U 0-76- ACO upgrade kit for 6 insert panel U 0-76- ACO upgrade kit for insert panel 4 U 0-76-4 ACO faceplates for Cat. 6 (for 0-76-X)* 0-7-8 ACO faceplates for Cat. 5 (for 0-76-X)* 0-78-8 ACO faceplates neutral (for 0-76-X) 0-7-8 ACO upgrade kit for 4 insert HD panel U 0-78- ACO faceplates for Cat. 6 (for 0-78-)* 0-740-8 ACO faceplates for Cat. 5 (for 0-78-)* 0-74-8 ACO faceplates neutral (for 0-78-) 0-74-8 * Cat. 6 & Cat. 5 faceplates support single and dual RJ-45 inserts MRJ Shielded Patch Panels -X Color - light grey (RAL 705) - black (RAL 005) High-density, small form factor connectivity Factory terminated and tested Modular, pluggable design 4 pair MRJ patch panels for 0Base-T, 00Base-T and 000Base-T pair MRJ patch panels for 0Base-T and 00Base-T Description Application Part Number I/O Cable(s) 4 port straight patch panel 4 pair (0/00/000Base-T) 0-7770- 48 port straight patch panel pair (0/00Base-T) 0-77704- 48 port straight patch panel 4 pair (0/00/000Base-T) 0-77704- 48 port angled patch panel 4 pair (0/00/000Base-T) 0-77705- Cat. PCB Patch Panels for Telephone Applications, U, telephone panel with 50 ports With rear cable management LSA+ compatible connecting blocks Connecting blocks for conductor diameter range of 0.4 0.65 mm Description Active Pins Color Part Number I/O Cable(s) 50 port panel -4-5-6 light grey (RAL 705) 0-4060- 50 port panel -4-5-6 black (RAL 005) 0-4060- I/O upgrade kit to full AMPTRAC 0-4554- 0 4 www.ampnetconnect.eu

FO Patch Panels Optical Fiber Patch Panels Available for MT-RJ, LC Duplex and SC Duplex systems Available in OM (6.5/5 µm), OM (50/5 µm) and singlemode Support field termination or use with MPO cassettes MT-RJ patch panel jacks and duplex LC SL Series inserts sold separately. Description Photo Fiber Type Part Number I/O Cable(s) Unloaded Patch Panels for Cassettes/Adaptor Plates U Frontplate for MPO Snap-In Cassettes/Adaptor Plates A 0-674-4 U Drawer for MPO Snap-In Cassettes/Adaptor Plates B 0-6708-8 U Drawer for 4 MPO AMPTRAC Cassettes C 0-674-5 U Drawer for 4 MT-RJ Jacks (48 fibers) D 0-6748- MT-RJ MPO AMPTRAC Cassette, 6 ports ( fibers) E OM 50 µm XG 0-4554-X MPO AMPTRAC Cassette, 6 ports ( fibers) E OM 6.5 µm 0-4567-X MPO AMPTRAC Cassette, 6 ports ( fibers) E Singlemode 0-4567-X LC Duplex MPO AMPTRAC Cassette, 6 ports ( fibers) F OM 50 µm XG 0-4647-X MPO AMPTRAC Cassette, 6 ports ( fibers) F OM 6.5 µm 0-4648-X MPO AMPTRAC Cassette, 6 ports ( fibers) F Singlemode 0-464-X U drawer for 4 LC Duplex Inserts (48 fibers) G OM 50 µm XG 0-674- U drawer for 4 LC Duplex Inserts (48 fibers) G Multimode 0-674- U drawer for 4 LC Duplex Inserts (48 fibers) G Singlemode 0-674- SC Duplex MPO Snap-In Cassette, 6 ports ( fibers) H OM 50 µm XG 0-45688-X MPO Snap-In Cassette, 6 ports ( fibers) H OM 6.5 µm 0-4565-X MPO Snap-In Cassette, 6 ports ( fibers) H Singlemode 0-4568-X Snap-In Adaptor Plate, 6 ports ( fibers) I Multimode (beige) 0-45657- Snap-In Adaptor Plate, 6 ports ( fibers) I Singlemode (blue) 0-45657- Snap-In Adaptor Plate, 6 ports ( fibers) I Singlemode APC (green) 0-45657- Cable Management Brackets and Bars Brackets and bars provide support for I/O cables or patch cords Front-mount to monitored patch panels and switches Adjustable universal brackets for use at left or right panel edge -X Fibers - Pairs straight - Pairs flipped 8 8 8 8 8 8 A: Frontplate panel ( Snap-In slots) B: Drawer Panel ( Snap-In slots) C: Drawer Panel (4 Snap-In slots) D: MT-RJ Panel (6 x MT-RJ) F: MPO AMPTRAC Cassette (6 x LC Duplex) G: LC Fiber Panel (for 4 SL ports) H: MPO Snap-In Cassette (6 x SC Duplex) E: MPO AMPTRAC Cassette (6 x MT-RJ) I: Snap-In Adaptor Plate (6 x SC Duplex) Description Part Number Universal I/O cable bracket 40 mm, single-side-mount 0-465- Universal I/O cable bracket 00 mm, single-side-mount 0-465- Universal I/O cable bracket 448 mm, double-side-mount 0-465- Patch cord management bar 0-744- I/O cable retainer bracket for CISCO 500, 48 port switch 0-4577- U Cable Management Bar Patch panel Mounting 0-45- U Cable Management Bar Rack Mounting 0-557548- www.ampnetconnect.eu 5

I/O Cables AMPTRAC I/O Cable Overview DB5 (4 pos. used) DB5 (4 pos. used) DB5 (4 pos. used) ( pos.) (8 pos.) Use with DB5 Adaptor 0-464- Use with DB5 Adaptor 0-464- Use with DB5 Adaptor 0-464- Use with DB5 Adaptor 0-464- Use with DB5 Adaptor 0-464- Use with DB5 Adaptor 0-464- HD (4 pos. used) (4 pos. used) 4 x 0 P n P ( pos.) (8 pos.) RJ-,54 MTE B- -A Length (in feet) (in meter) 0- -, 0- - 6,6 0- -,8 0- -5 6,4 5 4 port PCB Patch Panels (UTP+STP) 4 port unloaded SL Jack Panel all AMP CO Plus Patch Panels all MRJ Patch Panels 4 port Sensor Strips (for LAN switches or Panel Retro-fit) UTP and STP Patch Panels (SL0C + 6Block) FO Patch Panels (MT-RJ + LC Duplex) 6 port Sensor Strips (for LAN switches or Panel Retro-fit) port Sensor Strips (for LAN switches or Panel Retro-fit) 8 port Sensor Strips (for LAN switches or Panel Retro-fit) 6 port Sensor Strips (for LAN switches or Panel Retro-fit) MPO Cassettes (MT-RJ + LC Duplex) 8 MPO Cassettes (SC Duplex) Snap-In Plates (SC Duplex) Y- -X Length (in feet) (in meter) 0- -4 4, 0- -7 7, - -0 0, - -4 4 4, - -5 5 7,6 5- -0 50 5, 7- -5 75, - - 00 0,5 st Connector (to AMPTRAC Analyzer) nd Connector (to Monitored Device), Application Examples Part Number 4 5 6 7 B-75-A (EMEA) Y-4507-X (USA) B-74-A (EMEA) Y-45845-X (USA) Y-5-X Y-4686-X Y-4687-X Y-4688-X Y-468-X Y-4684-X Y-4685-X ( pos.) Use with DB5 Adaptor 0-464- ( pos.) port Sensor Strips (for LAN switch uplink ports) 0 Y-460-X Adaptor DB5 to mm For use with.0 mm connectors less than 4 position Accepts any combination of.0 mm plugs ( 6 pos.) that adds up to 4 position Allows for use of all analyzer ports Built-in strain relief and cable management Description Part Number Adaptor to DB5 0-464- Plug & Play connector 0-5- 6 www.ampnetconnect.eu

Patch Cords Twisted Pair Patch Cords Assemblies Patch cord assemblies contain th conductor that is connected to external probe molded into the modular plug boot Backward compatible to support Cat. 5E systems External probe makes contact with sensor pad on patch panel or switch Off-center probe designed to accommodate stacked-jack LAN switch configurations LSZH or CMR jacket Over-molded snagless boots Description Color Performance Part Number LSZH STP white Class E A 0-7548-A LSZH UTP white Cat. 6 0-75-B CMR STP white Cat. 6 Y-4740-X CMR UTP white Cat. 6 Y-4584-X Optical Fiber Patch Cord Assemblies -A Length (in feet) (in meter) -, - 6,6 -,8-5 6,4 5 -B Length (in feet) (in meter) -5, -6 6,6-7,8-8 6,4 5 Exceeds optical performance specifications for OM (6.5/5 µm), OM (50/5 µm) and single mode Available for MT-RJ, LC Duplex and SC Duplex assemblies Patch cord assemblies contain copper conductor that is connected to external probe External probe makes contact with sensor pad on patch panel or switch One wire/one probe design to monitor duplex fiber port as a single connection OFNR riser rated and listed cable Cable is a mini-tri-zip design for flexibility and small size Y- -X Length (in feet) (in meter) 0- - 0, 0- -5 5,5 0- -7 7, - -0 0, - -4 4 4, - -6 6 4, - -5 5 7,6 MT-RJ LC Duplex Description OM OM Singlemode 50/5µm XG 6,5/5 µm MT-RJ to MT-RJ Y-455-X Y-455-X Y-455-X MT-RJ to LC Duplex Y-457-X Y-457-X Y-4574-X MT-RJ to SC Duplex Y-4556-X Y-4555-X Y-4557-X LC Duplex to LC Duplex Y-4570-X Y-4578-X Y-457-X LC Duplex to SC Duplex Y-4576-X Y-4575-X Y-4577-X SC Duplex to SC Duplex Y-4575-X Y-4574-X Y-4576-X Y- -X Length 0- - m 0- - m 0- - m 0- -5 5 m 0- -7 7 m - -0 0 m SC Duplex www.ampnetconnect.eu 7

Sensor Strips Sensor Strips for LAN Electronics Sensor strips are readily available for a number of LAN electronic equipment types Easy mounting and installation The below table shows a selection of commonly used switch models Custom sensor strips can be designed on request to work with other LAN electronic equipment (LAN equipment manufacturer, model number, and model revision are required in determining the selection of the proper sensor strip) Ports per Strip Typical Switch Part Number I/O Cable(s) 4 ALCATEL OmniSwitch OS664, 4-Port 0-777005- ALCATEL 6648 Fiber Uplink Ports 0-4780- 4 CISCO 50, 500, 750, 4-Port 0-4546-5 4 CISCO 4000 and 6000, 48-Port Blades 0-4546- 4 CISCO 500 and 4548, 48-Port 0-4546-4 6 CISCO 50, 4-Port + Uplink Ports 0-4587- 6 CISCO GBIC, 6-Port Blade 0-4580- 4 CISCO MT-RJ 6000, 4-Port Blade 0-457- 48 CISCO 648, 48 ports 0-465- CISCO 500 Fiber Uplink Ports 0-4588- 6 EXTREME Summit 48i 0-457- EXTREME Summit i & 5i and Alpine 808 0-455- 4 NORTEL BAYSTACK 450-4T, 4-Port 0-45- 4 NORTEL BAYSTACK 470-48T, 48-Port 0-45- 48 NORTEL BAYSTACK 550 0-4660- 4 NORTEL PASSPORT 8648, 4-Port 0-77704- Generic Stacked, 4mm Spacing, -Port 0-7770- Generic Fiber Uplink Ports 0-4550- Important note: Port footprint of LAN electronic model may be changed by manufacturer without notification! To prevent sensor pad mismatch, always double-check your actual LAN electronics model with scaled sensor strip template (PDF). For switch models not listed or additional information ask your local AMP NETCONNECT sales contact. Patch Panel Retrofit Kits Kits are designed to retrofit existing installations of AMP NETCONNECT connectivity Most of the common patch panels can be retrofitted with these self-adhesiv sensor strips For more information ask you local AMP NETCONNECT sales contact 0 4 0 4 5 5 0 0 8 www.ampnetconnect.eu

Summary Why using AMPTRAC Intelligent Infrastructure Management System? The AMPTRAC Infrastructure Manager bridges the gap between Network Management Software and Physical Layer Management, and concurrently revolutionizes the way networks are controlled and managed. AMPTRAC IM illustratively shows the physical topology of your data center, communication rooms and wiring closets, while at the same time helping you to manage and troubleshoot your network connectivity with real-time monitoring and documentation. Among the many benefits of the AMPTRAC System are: the increase of MAC accuracy and productivity the reduction of downtime the increase of network security the reduction of costly mistakes the improvement of asset utilization Or simply said, turn THIS into THIS! Take the Guess Work Out of Your MACs

TE AMP NETCONNECT Regional Sales Headquarters: North America Greensboro, NC, USA Ph: +-800-55-08 Fx: +-77-86-7406 Latin America Buenos Aires, Argentina Ph: +54--47-00 Fx: +54--47-8 Europe Kessel-Lo, Belgium Ph: +-6-5-0 Fx: +-6-5-88 Mid East & Africa Cergy-Pontoise, France Ph: +--40- Fx: +--40-68 Asia Hong Kong, China Ph: +85-75-68 Fx: +85-75-65 Pacific Sydney, Australia Ph: +6--554-600 Fx: +6--554-5 TE AMP NETCONNECT in Europe, Middle East, Africa and India: Austria Vienna Ph: +4--0560-04 Fx: +4--0560-70 Belgium Kessel-Lo Ph: +-6-5-0 Fx: +-6-5-88 Bulgaria Sofia Ph: +5--7-5 Fx: +5--7-5 Czech&Slovak Rep. Kurim Ph: +40-54-6- Fx: +40-54-6- Denmark Glostrup Ph: +45-70-5-5-00 Fx: +45-4-44-4-4 Egypt Cairo Ph: +0--4-4 Fx: +0--47-7647 Finland Helsinki Ph: +58-5--4-0 Fx: +58-5--4-50 France Cergy-Pontoise Ph: +--40- Fx: +--40-68 Germany Langen Ph: +4-60-70-547 Fx: +4-60-70- Greece/Cyprus Athens Ph: +0-0-70-6 Fx: +0-0-70-655 Hungary Budapest Ph: +6--8-007 Fx: +6--8-00 India Bangalore Ph: +-80-40-5000 Fx: +-80-40-500 Italy Collegno (Torino) Ph: +-0-40- Fx: +-0-40-68 Kazakhstan Almaty Ph: +7-77-44-5874 Fx: +7-77-44-5877 Lithuania Vilnius Ph: +70-5--40 Fx: +70-5--40 Netherlands Den Bosch Ph: +-7-646-46 Fx: +-7-646-58 Norway Nesbru Ph: +47-66-77-88- Fx: +47-66-77-88-55 Poland Warsaw Ph: +48--4576-700 Fx: +48--4576-70 Portugal Evora Ph: +5-6-77- Fx: +5--454-506 Romania Bucharest Ph: +40---47 Fx: +40---0574 Russia Moscow Ph: +7-45-70-7-0 Fx: +7-45-7-8-4 Spain Barcelona Ph: +4---00 Fx: +4---0608 Sweden UpplandsVäsby Ph: +46-8-507-5000 Fx: +46-8-507-500 Switzerland Steinach Ph: +4-7-447-0-447 Fx: +4-7-447-0-4 Turkey Istanbul Ph: +0--8-88 Fx: +0--8-884 UK Stanmore, Middx Ph: +44-08-40-840 Fx: +44-08-54-7467 Ukraine Kiev Ph: +80-44-06-65 Fx: +80-44-06-64 U.A.E. Dubai Ph: +7-4--00 Fx: +7-4--600 0877-4 M DE 05/0 AMP NETCONNECT, AMPTRAC, Tyco Electronics and TE Logo are trademarks. 00 Tyco Electronics All rights reserved www.ampnetconnect.eu