Improvements of Printer Driver GUI for GA-1060 Revision 1.1 This printer driver is not compatible because of the operativeness improvement of GUI with printer driver of version 2.xx. Please use this manual and the printing guide about the point where the operation is different. 1. Paper Tab 1.1 Paper Size For details, please refer to -Setup Tab (1) Original paper Size on page 60 in the Printing Guide. 1.2 Location For details, please refer to -Setup Tab (4) Paper Source on page 60 in the Printing Guide. 1.3 Number of Copies For details, please refer to -Setup Tab (6) Number of Copies on page 61 in the Printing Guide. 1.4 Orientation GUI control was changed into the Combo Box from the Radio Button. For details, please refer to -Setup Tab (5) Orientation on page 61 in the Printing Guide. 1.5 Printing Order New Printer Driver dose not have this function. Reverse is always used. 1.6 Enlarge/Reduce Printing-> Output Paper Size The setting Window was changed into the Main Window from the Sub Dialog Window. For details, please refer to -Setup Tab (3) Print Paper Size on page 60 in the Printing Guide. 1.7 Enlarge/Reduce Printing-> Zoom The setting Window was changed into the Main Window from the Sub Dialog Window. For details, please refer to -Setup Tab (2) Manual Scale on page 60 in the Printing Guide. 2. Margin Tab 2.1 Binding Margin New Printer Driver dose not have this function. Please use the setting of the application side. 2.2 Paper Margin New Printer Driver dose not have this function. Please use the setting of the application side. - 1 -
3. Output Tab 3.1 Sort Mode GUI control was changed into the Combo Box from the List Box. The Sort setting and Staple setting were divided into the separate setting item. And Booklet setting moved to another property sheet tab. For details, please refer to -Setup Tab (7) Copy Handling and -Setup Tab (8) Staple on page 61, and -Layout Tab Booklet Window on page 67 in the Printing Guide. 3.2 Hole Punch GUI control was changed into the Combo Box from the Radio Button. For details, please refer to -Setup Tab (9) Hole Punch on page 62 in the Printing Guide. 3.3 Duplex Printing GUI control was changed into the Combo Box from the Radio Button. For details, please refer to -Setup Tab (10) 2-Sided Printing on page 63 in the Printing Guide. 3.4 Layout Printing GUI control was changed into the Combo Box from the List Box. For details, please refer to -Layout Tab Multiple Pages per Sheet Window on page 68 in the Printing Guide. 3.5 Special Printing -> Rotate Printing (PS Printer Driver Only) GUI control was changed into Main Dialog Windows from Sub Dialog Window. For details, please refer to -Effect Tab (3) Rotate 180 degrees on page 71 in the Printing Guide. 3.6 Special Printing -> Mirror Printing (PS Printer Driver Only) GUI control was changed into Main Dialog Windows from Sub Dialog Window. For details, please refer to -Effect Tab (4) Mirror on page 71 in the Printing Guide. 3.6 Special Printing -> Negative/Positive Printing (PS Printer Driver Only) GUI control was changed into Main Dialog Windows from Sub Dialog Window. For details, please refer to -Effect Tab (5) Negative/Positive on page 71 in the Printing Guide. 4. Cover Sheet Tab 4.1 Cover Sheet Print Style GUI control was changed into the Combo Box from the Radio Button. And Back Cover GUI control was changed into the Radio Button from the Check Box. For details, please refer to -Layout Tab Standard Window (1) Use Front Cover on page 65 in the Printing Guide. - 2 -
4.2 Sheet Insertion Print Style GUI control was changed into the Combo Box from the Radio Button. For details, please refer to -Layout Tab Standard Window (2) Insert Pages on page 66 in the Printing Guide. 5. Watermark Tab 5.1 Watermark The edit screen became Sub Dialog Window. For details, please refer to -Effect Tab (1) Watermark on page 70 and Add/Edit Watermark on page 71 in the Printing Guide. 6. Print Quality Tab 6.1 Gray Scale PCL6 Printer Driver: This function is not supported. PS Printer Driver: GUI control was changed into the Combo Box from the Radio Button. For details, please refer to -Image Quality Tab (1) Halftone on page 74 in the Printing Guide. 6.2 Compress Bitmap GUI control was changed into Main Dialog Windows from Sub Dialog Window. For details, please refer to -Effect Tab PostScript Settings (3) Compress Bitmap on page 73 in the Printing Guide. 6.3 TrueType Fonts GUI control was changed into the Combo Box from the Radio Button. For details, please refer to -Font Tab (1) TrueType Options on page 75 in the Printing Guide. 6.4 Substitution Table Edit GUI control was changed into Main Dialog Windows from Sub Dialog Window. For details, please refer to -Font Tab (2) Substitution Table Edit on page 75 in the Printing Guide. 6.5 Smoothing Function For details, please refer to -Image Quality Tab (2) Smoothing on page 74 in the Printing Guide. 6.6 Run Font Manager For details, please refer to -Fonts Tab (3) Run Font Manager on page 76 in the Printing Guide. 7. PDL Tab (PS Printer Driver Only) - 3 -
7.1 Print PDL Information GUI control was changed into Sub Dialog Windows from Main Dialog Window. For details, please refer to -Effect Tab PostScript Settings (2) Print Error Infromation on page 73 in the Printing Guide. 7.2 Job Timeout The new printer driver does not support this function. 7.3 Output to The new printer driver does not support this function. The print job is always output to the printer. Use the application settings as you require. 8. Option Tab 8.1 Option For details, please refer to -Configuration Tab on page 76 in the Printing Guide. 8.2 Destination Destination setting moved to the Print Job property sheet tab from the Option Tab. For details, please refer to -Print Job Tab (4) Destination on page 64 in the Printing Guide. 9. Other Tab 9.1 Group Number It became possible to change the Group Number. For details, please refer to -Print Job Tab (5) Group Number on page 65 in the Printing Guide. 9.2 User Name It became possible to change the User Name. When you install the printer driver, the user name that is used to login your computer is entered. For details, please refer to -Print Job Tab (6) User Name on page 65 in the Printing Guide. 9.3 Private Print For details, please refer to -Print Job Tab (2) Private Print on page 64 in the Printing Guide. 10. New Functions For details, please refer to each page in the Printing Guide. - 4 -
(PCL6 Printer Driver GUI Image) 1. Paper Tab (Setup Tab) 1.1 1.2 1.3 1.4 1.5 1.6 1.7 2. Margin Tab 2.1 2.2-5 -
(PCL6 Printer Driver GUI Image) 3. Output Tab (Setup Tab, Layout Tab) 3.1 3.2 3.3 3.4-6 -
(PCL6 Printer Driver GUI Image) 4. Cover Sheet Tab (Layout Tab) 4.1 4.2 5. Watermark Tab (Effect Tab) 5.1-7 -
(PCL6 Printer Driver GUI Image) 6. Print Quality Tab (Image Quality Tab, Fonts Tab) 6.1 6.3 6.2-8 -
(PCL6 Printer Driver GUI Image) 7. Option Tab (Configuration Tab, Print Job Tab) 8.1 8.2 8. Other Tab (Print Job Tab) 9.1 9.2 9.3-9 -
(PS Printer Driver GUI Image) 1. Paper Tab (Setup Tab) 1.1 1.2 1.3 1.4 1.5 1.6 1.7 2. Margin Tab 2.1 2.2-10 -
(PS Printer Driver GUI Image) 3. Output Tab (Setup Tab, Layout Tab) 3.1 3.2 3.3 3.4 3.5 3.6 3.7-11 -
(PS Printer Driver GUI Image) 4. Cover Sheet Tab (Layout Tab) 4.1 4.2 5. Watermark Tab (Effect Tab) 5.1-12 -
(PS Printer Driver GUI Image) 6. Print Quality Tab (Image Quality Tab, Fonts Tab) 6.1 6.2 6.3 6.4 6.5 7.PDL Tab (Effect Tab PostScript Settings) 7.1 7.2 7.3 (PS Printer Driver GUI Image) - 13 -
8. Option Tab (Configuration Tab, Print Job Tab) 8.1 8.2 9. Other Tab (Print Job Tab) 9.1 9.2 9.3-14 -