About this Quick-Reference Guide The navigation functions of the Toyota Touch & Go are described in the Toyota Touch & Go Owner s Manual. This Quick-Reference Guide describes how you can use the "connected services" of your Toyota Touch & Go. "Connected services" is the term we use for features which require connection via the Internet using a mobile phone. The features which require this connection are: Google Local Search : Finding an address or point of interest whilst in the car using Google Local Search (or other providers in the future) and setting it as a destination. Google Send to Car : Sending an address to the car from your computer (via Google) and using it as a destination. Applications like wheather, parking, Twitter and others. After registering please refer to the download section at my.toyota.eu to see the list of application currentlyavailable. This Quick-Reference Guide describes the following topics: Registering at My Toyota...3 Entering your user name and password in the Toyota Touch & Go...5 Connecting your mobile phone to the Toyota Touch & Go...6 Setting up the Internet connection on the Toyota Touch & Go...8 Sending Google Maps addresses to your Toyota Touch & Go(Google Send to Car )...9 Finding a destination with Google Local Search...12 System requirements...14 Legend: vehicle display using your computer using your cell phone Note: In the interest of continuous development, we reserve the right to change specifications design or,equipment at any time without notice or obligation Please visit the website for the latest publication. 2
Registering at My Toyota In order to use the connected services provided by the Toyota Touch & Go, you must register at My Toyota ( my.toyota.eu). Once you have registered, you can also register your vehicle. Finding the system information of your Toyota Touch & Go 1. Press the SETUP button next to the display. 2. Tap General on the display. 3. Scroll down to System information. System information Device ID: MOgyY a_jv 3u@O Wa1t mizaa 7710 4. Tap System information. 5. Note down or take a photograph of the displayed device ID. Software version: x.x.xx Map ID: xxxxxxxxxx Copy to USB Note: Observe the use of uppercase and lowercase characters, blank spaces versus underscores(_)and zeroversus O. Creating a user account at My Toyota 1. Go to my.toyota.eu. 2. Select your country (or Europe) and click Register. 3. Fill out the registration form. Welcome to My Toyota My Toyota is a new service that offers you easy access to information about your cars and enables "Online Search" for latest generation navigation systems starting with Verso S and new Generation Yaris. Register Resend Confirmation Mail? Important: Remember your user name and password. This information is required by the Toyota Touch & Go to log in to the server. 3
Registering your vehicle at My Toyota Your vehicle must be registered in order for data to be sent to the Toyota Touch & Go. To register your vehicle, you will need: The vehicle identification number (VIN), which you can find on the vehicle registration certificate The device ID of the navigation system, shown on the "system information" screen 1. LogintoMy Toyota ( my.toyota.eu) 2. Click Add a vehicle and complete the relevant fields. Required fields are indicated by an asterisk ( * ). Note: Observe the use of uppercase and lowercase characters, blank spaces versus underscores(_)and zeroversus O. 3. Click the Validate button to check the validity of your vehicle identification number (VIN) or device ID. Setting up search providers at My Toyota Attention: In order to use the Google Local Search service in your vehicle, you have to select Google as a search provider and accept the terms and conditions of use. 1. LogintoMy Toyota ( my.toyota.eu) 2. Click Connected Services. 3. Click Search provider. 4. Select Google Local Search and accept the terms and conditions of use. It may take a few minutes before the Google Local Search service can be used in the vehicle. If necessary, switch the ignition off and on again. 4
Entering your user name and password in the Toyota Touch & Go 1. Press the SETUP button next to the display. 2. Tap Bluetooth on the display. 3. Tap Internet connection. 4. Tap Login Data. 5. Enter the user name and password with which you registered at My Toyota. 5
Connecting your mobile phone to the Toyota Touch & Go In order to use the handsfree equipment as well as other functions, you must pair your Bluetooth phone with the Toyota Touch & Go. Making your mobile phone Bluetooth-discoverable 1. Switch on the Bluetooth function on your mobile phone and make it "discoverable".refer to the operation instructions of your mobile phone, if necessary. 2. Note down the name or device designation of your mobile phone. 6
Pairing your mobile phone with the Toyota Touch & Go 1. Press the SETUP button next to the display. 2. Tap Bluetooth. 3. Tap Search for Bluetooth devices. Note: Your mobile phone must still be Bluetooth-discoverable. Searching appears on the display, after which the detected devices are listed. 4. Select your mobile phone on the display. The PIN is shown on the Toyota Touch & Go Searching Cancel 5. If required, enter the pass code on your mobile phone. 6. Tap Accept to confirm all the connection requests on the Toyota Touch & Go and on the mobile phone. The Toyota Touch & Go checks which functions are supported and connects the mobile phone accordingly. 7
Setting up the Internet connection on the Toyota Touch & Go Attention: To set up an Internet connection on the Toyota Touch & Go, you need to enable access to the Internet on your mobile phone (tethering). Check with your mobile phone provider whether your data plan allows tethering. The pairing process for the Internet connection does not take place automatically. To start the pairing process, proceed as follows: 1. Press the SETUP button next to the display. 2. Tap Bluetooth. 3. Tap Paired device list. The activated functions are displayed in colour. 4. Select the name of your mobile phone on the display. 5. Tap Connect for Internet. You may need to select a provider from the list, depending on your mobile phone. 6. If the provider is not in the list, create a separate entry under Advanced (next to Connect for Internet). Note: You can request the APN data required for the Internet connection from your provider. Note for iphone: Make sure to switch on the "Personal hotspot" function. 8
Sending Google Maps addresses to your Toyota Touch & Go (Google Send to Car) Using the Google Send to Car service, you can look up an address on Google Maps on your computer and then send this address to your Toyota Touch & Go. Sending an address to your car 1. Go to Google Maps of your country, for example maps.google.co.uk 2. Search your destination. 3. Click the green arrow or the red destination marker on the map. 4. Click more in the window shown here and choose Send The Send window opens. In the Send window, select Car. 5. In the Name field, type a descriptive name for your destination. 6. In the Make list, selecttoyota. 9
7. In the My Account field, type your account name. 8. Click Send. My Toyota opens. 9. Enter your password. 10. If necessary, select Send to all vehicles. The address is saved on My Toyota. 10
Downloading an address to your Toyota Touch & Go 1. Connect your Toyota Touch & Go to the Internet via your mobile phone. See Setting up an Internet connection on the Toyota Touch & Go. 2. Press the MAP NAV button. 3. Tap Enter destination. 4. Tap the Advanced tab. 5. Tap Load addresses from server. The addresses which were saved on My Toyota are now downloaded to your Toyota Touch & Go. 6. To load the address, tap My Destinations. You will see the address in the Stored tab. Finding a destination with Google Local Search 1. Press the MAP NAV button next to the display. 2. Tap Enter destination. 3. Select the Advanced tab. 4. Tap Online search Online search by Google. 5. Tap Search area. 6. Select whether you want to search for an address at your current position or at your destination. 7. Tap Enter search word, typeyoursearch queryand tap OK. You can scroll down to see the first 20 search results. You can tap Download more to see up to 40 more destinations. 8. Select one of the results and tap Go. The Toyota Touch & Go starts the route guidance. Once the Toyota Touch & Go finishes its search, it will no longer require the Internet connection provided by your phone and it will stop accessing you phone's data. 11
System requirements Checking the compatibility of your mobile phone with your Toyota Touch & Go In order to use the Bluetooth functions on the Toyota Touch & Go, your mobile phone must be Bluetooth-enabled. You can go online to check whether your mobile phone supports the required Bluetooth profiles: 1. Go to my.toyota.eu and log in. 2. Choose Other services > Mobile phones. 3. Select your vehicle, your Bluetooth system (Toyota Touch & Go) and your mobile phone. 4. Click Search. The supported features are displayed. 12
5. Check whether there is a check mark in the Connected Services column for your mobile phone. If your device is not listed, do any of the following: Check the operating instructions of your mobile phone to find out which Bluetooth profiles are supported Contact the mobile phone manufacturer and request information on the Bluetooth profiles Visit your Toyota dealer to test which functions are supported 13
Supported Bluetooth profiles The Toyota Touch & Go supports the following Bluetooth profiles. Function Profile Version Handsfree equipment Music streaming Internet HFP (Hands-Free Profile) PBAP (Phone Book Access Profile) A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) DUN (Dial-Up Networking Profile) or PAN (Personal Area Network) 1.0 or higher Recommended: 1.5 or higher 1.0 or higher 1.0 or higher Recommended: 1.2 or higher 1.0 or higher Recommended: 1.4 or higher 1.1 or higher 1.0 14
Notes 15
2012 Toyota Motor Europe N/V S/A To view this Quick Reference Guide: On your computer, please visit my.toyota.eu. On your mobile device, scan the QR code.