Use the below instructions to configure your wireless settings to connect to the secure wireless network using Microsoft Windows Vista/7. 1. Click the Windows Start button, then Control Panel How-To-WCC-Secure-Windows-7-11/4/2010-4:09 PM Page 1 of 11
2. Select Network and Internet How-To-WCC-Secure-Windows-7-11/4/2010-4:09 PM Page 2 of 11
3. Select Network and Sharing Center How-To-WCC-Secure-Windows-7-11/4/2010-4:09 PM Page 3 of 11
4. Select Manage Networks 5. Click on the Add button How-To-WCC-Secure-Windows-7-11/4/2010-4:09 PM Page 4 of 11
6. Select Manually Create a Network Profile 7. Add the following and this is case sensitive. a. Network name: WCC-Secure b. Security type: WPA2-Enterprise c. Encryption Type: AES d. Make sure Start this connection automatically is selected How-To-WCC-Secure-Windows-7-11/4/2010-4:09 PM Page 5 of 11
8. Click Next How-To-WCC-Secure-Windows-7-11/4/2010-4:09 PM Page 6 of 11
9. Select Change connection Settings 10. WCC-Secure Network Properties window will appear 11. Select the Security Tab 12. Click on the Settings button next to the Choose a Network Authentication Method How-To-WCC-Secure-Windows-7-11/4/2010-4:09 PM Page 7 of 11
13. Uncheck Validate server certificate 14. Click the Configure button under Select Authentication Method 15. Uncheck Automatically use my Windows logon name and password (and domain if any). 16. Click OK 17. Click OK again. How-To-WCC-Secure-Windows-7-11/4/2010-4:09 PM Page 8 of 11
18. Click on the Advanced Settings button under the Security tab (Windows 7 Only) 19. Check the box Specify authentication mode: (Windows 7 Only) How-To-WCC-Secure-Windows-7-11/4/2010-4:09 PM Page 9 of 11
20. Leave the default of User or computer Authentication (Windows 7 Only) 21. Click OK (Windows 7 Only) 22. Click OK again. How-To-WCC-Secure-Windows-7-11/4/2010-4:09 PM Page 10 of 11
23. Now try to connect to the wireless network (Windows 7 Only) 24. Click Connect 25. Now a dialog appears asking for your user credentials. Enter your X-number and mywcc/network password. 26. Click OK 27. If you entered your password correctly you should now be connected. If you don t connect on the first try to disconnect from the wireless network and select connect again How-To-WCC-Secure-Windows-7-11/4/2010-4:09 PM Page 11 of 11