Ceta Form industrial quality bits program helps workshops, factories, assembly lines and technicians in various trades to increase the efficiency of their businesses thanks to durability of our bits which reduces the stoppage times. The entire Ceta Form bits program is manufactured using upgraded quality Chrome Vanadium Molybdenum steel. They are machined in automatic machines for an excellent fit into the screw and heat treated in advanced furnaces. As a result, our bits outperform in terms of precision and durability. The large range of tip and drive types available in the range is another advantage of our bits program. TIN Bits: these bits with a very hard titanium-nitride (TIN) surface coating provide for several times longer service life compared to standard bits. Ideal especially for industrial applications on screws with our without heat treatment. Package Types Torsion Bits: the bits designed for applications where sudden torque-peaks are likely. The torsion zone absorbs these sudden peaks and prolongs life. Ideal for power use. Resistant to wear and tear. Comes in sandblasted industrial finish. 1-POS: These 2 piece blister packs are ideal for a good presentation in sales points. Standard Bits: the multi-purpose bits designed for regular applications. Ideal for manual or power use. Resistant to wear and tear. Comes in sandblasted industrial finish. 2-Regular: This is the standard shipping pack for 25 mm and 50 mm bits. Contains 12 bits per pack. Mini Bits Ratchet Page 35 10 mm Bits Page 32 Bit Sets Page 34 Aviation Bits Page 30 3-Trade: This is the economic packing option for the trade. 25 mm bits ship in 100 piece packs and 50 mm bits ship in 50 piece packs. 27
1/4 Drive 25 mm Insert Bits DIN 3126 - C 6.3, ISO 1173 These bits are for use with bit screwdrivers or for power use by means of bits adaptors. TIN TIN Phillips Bits Slotted Bits Bits for slotted screws. DIN 5264-C, ISO 2380. Bits for Phillips screws. Upgraded chrome-vanadium-molybdenum steel. Titanium nitride coated for extended durability. CB/251TIN PH1 25 4 12 CB/252TIN PH2 25 5 12 CB/253TIN PH3 25 5 12 CB/611 4.0 0.8 25 4 12 4.5 0.8 25 4 12 CB/612 5.5 1.0 25 5 12 CB/613 6.5 1.2 25 5 12 Phillips Bits CB/260 Phillips Bits, reduced diameter Bits for Phillips screws. Bits for Phillips screws, limited clearance. PH0 25 4 12 CB/251 PH1 25 4 12 CB/252 PH2 25 5 12 CB/253 PH3 25 5 12 CB/262 PH2 25 4 12 T Phillips Bits (TORSION) Pozidriv / Supadriv Bits Bits for Phillips screws. With optimal torsion zone against rapidly increasing torque. Bits for Pozidriv screws. DIN 5260, ISO 8764-PZ. 28 CB/252T PH2 25 4 12 PZ0 25 4 12 CB/351 PZ1 25 4 12 CB/352 PZ2 25 5 12 CB/353 PZ3 25 5 12
smartools T Pozidriv / Supadriv Bits (TORSION) T TORX Tamper Resistant Bits Bits for Pozidriv screws. DIN 5260, ISO 8764-PZ. With optimal torsion zone against rapidly increasing torque. CB/352T PZ2 25 4 12 TIN TIN Pozidriv / Supadriv Bits Bits for Resis-TORX socket screws. Tamper Resistant TORX CB/806T T10 25 4 12 CB/807T T15 25 4 12 CB/808T T20 25 4 12 CB/809T T25 25 4 12 CB/810T T27 25 5 12 CB/811T T30 25 5 12 CB/812T T40 25 6 12 Bits for Pozidriv screws. Upgraded chrome-vanadium-molybdenum steel. DIN 5260, ISO 8764-PZ. Titanium nitride coated for extended durability. CB/1800 Hexagonal Bits CB/351TIN PZ1 25 4 12 CB/352TIN PZ2 25 5 12 CB/353TIN PZ3 25 5 12 TORX Bits Bits for TORX socket screws. TORX CB/840 Bits for hexagon socket screws. ISO 2936 CB/1815 1.5 25 4 12 CB/1820 2.0 25 4 12 CB/1825 2.5 25 4 12 CB/1830 3.0 25 4 12 CB/1840 4.0 25 5 12 CB/1850 5.0 25 5 12 CB/1860 6.0 25 6 12 Square Bits CB/801 T5 25 4 12 CB/802 T6 25 4 12 CB/803 T7 25 4 12 CB/804 T8 25 4 12 CB/805 T9 25 4 12 CB/806 T10 25 4 12 CB/807 T15 25 5 12 CB/808 T20 25 5 12 CB/809 T25 25 5 12 CB/810 T27 25 5 12 CB/811 T30 25 5 12 CB/812 T40 25 6 12 Bits for square socket screws. Square. CB/841 No.1 25 4 12 CB/842 No.2 25 5 12 CB/843 No.3 25 5 12 29
CB/850 XZN Bits 1/4 Drive 50 mm Power Bits DIN 3126 - E 6.3, ISO 1173 These bits are for direct drive power use. Bits for multi-tooth screws especially for use in automotive industry. XZN. CB/854 M4 25 5 12 CB/855 M5 25 5 12 CB/856 M6 25 8 12 CB/858 M8 25 9 12 CB/600 Slotted Bits Bits for slotted screws. DIN 5264-C, ISO 2380. CB/860 TORQ-SET Bits CB/619 3.0 0.5 50 8 12 CB/620 4.0 0.8 50 8 12 CB/618 4.5 0.8 50 9 12 CB/621 5.5 1.0 50 10 12 CB/622 6.5 1.2 50 11 12 Bits for TORQ-SET screws, especially for use in aviation industry. TORQ-SET CB Phillips Bits CB/864 NO.4 25 5 12 CB/865 NO.5 25 5 12 CB/866 NO.6 25 5 12 CB/867 NO.8 25 5 12 CB/868 NO.10 25 6 12 CB/869 1/4 25 5 12 Bits for Phillips screws. CB/870 TRI-WING Bits Bits for TRI-WING screws, especially for use in aviation industry. TRI-WING CB/871 TW1 25 5 12 CB/872 TW2 25 5 12 CB/873 TW3 25 5 12 CB/874 TW4 25 5 12 CB/875 TW5 25 5 12 CB/491 PH1 50 9 12 CB/492 PH2 50 10 12 CB/493 PH3 50 11 12 CB/701 PH1 70 13 12 CB/702 PH2 70 16 12 CB/703 PH3 70 16 12 CB/901 PH1 90 20 12 CB/902 PH2 90 21 12 CB/903 PH3 90 21 12 CB/1101 PH1 110 24 12 CB/1102 PH2 110 27 12 CB/1103 PH3 110 27 12 CB/1271 PH1 127 20 12 CB/1272 PH2 127 25 12 CB/1273 PH3 127 27 12 CB/1521 PH1 150 35 12 CB/1522 PH2 150 36 12 CB/1523 PH3 150 38 12 30
smartools CB/490TIN TIN Phillips Bits CB/820 TORX Bits Bits for Phillips screws. Upgraded chrome-vanadium-molybdenum steel. Titanium nitride coated for extended durability. CB/491TIN PH1 50 9 12 CB/492TIN PH2 50 11 12 CB/493TIN PH3 50 11 12 CB/590 Pozidriv / Supadriv Bits Bits for TORX socket screws. TORX CB/822 T8 50 8 12 CB/823 T9 50 8 12 CB/824 T10 50 8 12 CB/825 T15 50 8 12 CB/826 T20 50 9 12 CB/827 T25 50 9 12 CB/828 T27 50 11 12 CB/829 T30 50 12 12 CB/830 T40 50 12 12 CB/1900 Hexagonal Bits Bits for Pozidriv screws. DIN 5260, ISO 8764-PZ. CB/591 PZ1 50 9 12 CB/592 PZ2 50 11 12 CB/593 PZ3 50 11 12 CB/711 PZ1 70 13 12 CB/712 PZ2 70 16 12 CB/713 PZ3 70 16 12 Bits for hexagon socket screws. ISO 2936 CB/1915 1.5 50 10 12 CB/1920 2.0 50 10 12 CB/1925 2.5 50 10 12 CB/1930 3.0 50 11 12 CB/1940 4.0 50 11 12 CB/1950 5.0 50 12 12 CB/1960 6.0 50 13 12 CB/590TIN TIN Pozidriv / Supadriv Bits Nut Setter Sockets Bits for Pozidriv screws. Upgraded chrome-vanadium-molybdenum steel. DIN 5260, ISO 8764-PZ. Titanium nitride coated for extended durability. CB/591TIN PZ1 50 9 12 CB/592TIN PZ2 50 9 12 CB/593TIN PZ3 50 11 12 For hexagon headed bolts, screws and nuts. Upgraded chrome-vanadium-mol. steel, /0542 5.5 42 16 12 /0642 6.0 42 16 12 /0742 7.0 42 16 12 /0842 8.0 42 19 12 /1045 10.0 45 23 12 /1345 13.0 45 29 12 31
CB/660 Reversible Bits CB/2000 Hexagonal Bits 10mm Bits for slotted, Phillips and Pozidriv screws. 1/4 Hexagon DIN 5264-C, DIN 5260-PH & PZ CB/662 5.5 PH2 60 12 12 CB/660 PH2 PZ2 60 13 12 CB/666 5.5 PZ2 60 12 12 CB/664 PH2 PH2 60 13 12 CB/667 PZ2 PZ2 60 12 12 10 mm Drive, 30/75 mm Bits These bits are for use with 3/8 and 1/2 Ceta Form bit holder sockets (see page 33). Bits for hexagon socket screws, for use on bit holder sockets. 10 mm Hexagon ISO 2936 CB/2004 4.0 30 16 6 CB/2005 5.0 30 17 6 CB/2006 6.0 30 17 6 CB/2007 7.0 30 17 6 CB/2008 8.0 30 18 6 CB/2010 10.0 30 19 6 CB/2012 12.0 30 24 6 CB/2014 14.0 30 28 6 CB/2105 5.0 75 47 6 CB/2106 6.0 75 47 6 CB/2107 7.0 75 48 6 CB/2108 8.0 75 48 6 CB/2110 10.0 75 49 6 CB/2112 12.0 75 66 6 CB/1000 TORX Bits CB/3000 XZN Bits 10mm 10mm Bits for TORX socket screws, for use on bit holder sockets. 10 mm Hexagon. TORX Bits for XZN screws, for use on bit holder sockets. 10 mm Hexagon. XZN 32 CB/1020 T20 30 13 6 CB/1025 T25 30 13 6 CB/1027 T27 30 13 6 CB/1030 T30 30 14 6 CB/1040 T40 30 14 6 CB/1045 T45 30 15 6 CB/1050 T50 30 15 6 CB/1055 T55 30 18 6 CB/1060 T60 30 21 6 CB/1140 T40 75 44 6 CB/1145 T45 75 45 6 CB/1150 T50 75 46 6 CB/1155 T55 75 48 6 CB/1160 T60 75 64 6 CB/3005 M05 30 16 6 CB/3006 M06 30 16 6 CB/3008 M08 30 17 6 CB/3010 M10 30 17 6 CB/3012 M12 30 21 6 CB/3014 M14 30 24 6 CB/3106 M06 75 45 6 CB/3108 M08 75 46 6 CB/3110 M10 75 47 6 CB/3112 M12 75 60 6
smartools Universal Bit Holder Adaptor for Sockets (Manual Use) Sleeve : For 1/4 hexagon insert bits. Stainless steel. 1/4 Hexagon, DIN 3126 - E 6.3, ISO 1173 /02 1/4" 60 22 12 /03 1/4" 75 29 12 For use with : For hand use sockets. 1/4 Hexagon, DIN 3126 - C 6.3, ISO 1173 1/4 drive or 3/8 drive sockets. /7010 1/4" from 1/4" 25 7 12 /7011 3/8" from 1/4" 25 10 12 Universal Bit Holder (quick-release) Adaptor for Sockets (Power Use) Sleeve : For 1/4 hexagon insert bits. Stainless steel. 1/4 Hexagon, DIN 3126 - E 6.3, ISO 1173 Quick-release chuck. /06 1/4" 60 28 12 /07 1/4" 75 31 12 For use with : For impact drive sockets. 1/4 Hexagon, DIN 3126 - E 6.3, ISO 1173 1/4 drive or 3/8 drive sockets. /7015 1/4" from 1/4" 50 14 12 /7018 1/4" from 1/4" 100 34 12 /7020 3/8" from 1/4" 50 21 12 /7028 3/8" from 1/4" 100 47 12 Universal Bit Holder (SDS-plus) Bit Holder Sockets For 1/4 hexagon insert bits. Sleeve : SDS Stainless steel. plus SDS-plus /08 1/4" 80 38 12 For use with 10mm or 1/4 drive bits. 1/4, 3/8 or 1/2 female drive. Spring loaded for frequent bit changes. /8001 1/4" for 1/4" 19 6 /8005 3/8" for 10mm 40 6 /8008 1/2" for 10mm 51 6 Bulk Trade Pack If you would like to order bits in bulk trade packs of 50 piece (for 50 mm) and 100 piece (for 25 mm), please simply add a letter B to the regular order code (i.e.: CB/252B). In our price list, you will find a seperate section for the prices of bulk trade pack bits. 33
CB/ST111 11 Piece Professional Bits Set CB/ST21 21 Piece Bits Set 5.5 mm; 6.5 mm 4.0 x 025 mm; 5.5 x 0.25 mm; 6.5 x 0.25 mm PH1; PH2 (2 pcs); PH3 PZ1; PZ2 (2 pcs); PZ3 /02 - Bit Holder 60 mm 94 PH1 x 025 mm; PH2 x 025 mm; PH3 x 025 mm PZ1 x 025 mm; PZ2 x 025 mm; PZ3 x 025 mm CB/ST112 11 Piece Professional Bits Set CB/1800 T10; T15; T20; T25; T30; T40 2.5 x 025 mm; 3.0 x 025 mm; 4.0 x 025 mm; 5.0 x 025 mm; 6.0 x 025 mm 166 /02 - Bit Holder 60 mm PH1; PH2 (3 pcs); PH3 CB/ST1 78 Piece Universal Bits Assortment PZ1; PZ2 (3 pcs); PZ3 /02 - Bit Holder 60 mm 94 CB/ST112TIN 11 Piece Professional Bits Set TIN PH1; PH2 (3 pcs); PH3 TIN PZ1; PZ2 (3 pcs); PZ3 /02 - Bit Holder 60 mm 94 4.0 x 025 mm (2 pcs); 5.5 x 025 mm (2 pcs) 6.5 x 025 mm (2 pcs) PH1 x 025 mm (5 pcs); PH2 x 025 mm (15 pcs) PH3 x 025 mm (5 pcs) CB/262 (reduced diameter) PH2 x 025 mm CB/ST113 11 Piece Professional TORX Bits Set PZ1 x 025 mm (5 pcs); PZ2 x 025 mm (15 pcs) PZ3 x 025 mm (5 pcs) T10 (1pc); T15 (1pc); T20 (1pc); T25 (1pc) T27 (1pc); T30 (1pc); T40 (1pc) 460 T T10 (1pc); T15 (1pc); T20 (1pc); T25 (1pc) T27 (1pc); T30 (1pc); T40 (1pc) T7; T8; T9; T10; T15; T20; T25; T27; T30; T40 /02 - Bit Holder 60 mm 92 CB/1800 3.0 x 025 mm (1 pc); 4.0 x 025 mm (1pc) 5.0 x 025 mm (1pc); 6.0 x 025 mm (1pc) /02 - Bit Holder 60 mm (1pc) /0842 - Nut Setter Socket (1pc) /7010 - Socket Adaptor (1pc) 34
smartools 3100/ Bitsholder With Magazine F26/F Flexible Shaft C-PLUS Bitsholder Handle : General use bitsholder for 1/4 hexagon insert bits. Precision hardened chrome-vanadium blade in mat chrome finish, stainless steel sleeve. Ergonomic, red cellulose acetate handle with bits magazine. 3100/1 1/4" 100 111 12 Socket : Handle : High torque softgrip bitsholder for 1/4 hexagon insert bits. Nickel plated chrome-vanadium holder. Ergonomic, softgrip multi-component technology C-PLUS handle. Hanging hole for organized workshops. Flexible blade design for working in confined spaces. F26/F 1/4" 150 109 x 37 134 12 F26/ C-PLUS Bitsholder F26/BR Ratchet for Bits Handle : High torque softgrip bitsholder for 1/4 hexagon insert bits. Precision hardened chrome-vanadium blade in mat chrome finish, stainless steel sleeve. Ergonomic, softgrip multi-component technology C-PLUS handle. Hanging hole for organized workshops. Handle : Fine-tooth ratchet for 1/4 hexagon insert bits, especially for operation in confined spaces. Precision hardened chrome-vanadium steel, multi-layer chrome plated. Sheathed PVC handle. With rigth-left direction switch. F26/BR 1/4" 40 6 F26/ 1/4" 100 109 x 37 104 12 3100/6 Sets of Bitsholder and Bits 3100/6A 7 Piece Slotted / Phillips Screwdriver Bits Set with Bitsholder CONTENTS (1 pc. each): 3100/1 - Bitsholder with magazine 4.0 x 025 mm; 5.5 x 025 mm ; 6.5 x 025 mm PH1 x 025 mm; PH2 x 025 mm 185 Each set packed in individual blister pack for effective display in sales points. PZ2 x 025 mm 3100/6C 7 Piece Resis-TORX Bits Set with Bitsholder 3100/6B 7 Piece TORX Bits Set with Bitsholder CONTENTS (1 pc. each): 3100/1 - Bitsholder with magazine CONTENTS (1 pc. each): 3100/1 - Bitsholder with magazine T T10; T15; T20; T25; T30; T40 185 T10; T15; T20; T25; T30; T40 185 35
CB/ST40 40 Piece Universal Bits Assortment SFCB 555 Piece Bits Merchandiser For exhibition of total 555 pieces of fast moving sizes of bits, holders and nut setters. Rigid metal construction, total 24 high quality acrylic drawers Width Depth Height 285 mm 140 mm 350 mm Each set packed in rigid metal case. 4.0 x 025 mm; 5.5 x 025 mm; 6.5 x 025 mm 4.0 x 025 mm (25 pcs); 5.5 x 025 mm (25 pcs) 6.5 x 025 mm (25 pcs) PH0 x 025 mm; PH1 x 025 mm; PH2 x 025 mm; PH3 x 025 mm CB/262 (reduced diameter) PH2 x 025 mm PZ0 x 025 mm; PZ1 x 025 mm; PZ2 x 025 mm; PZ3 x 025 mm PH1 x 025 mm (25 pcs) PH2 x 025 mm (25 pcs) PH3 x 025 mm (25 pcs) PZ1 x 025 mm (25 pcs) PZ2 x 025 mm (25 pcs) PZ3 x 025 mm (25 pcs) T8; T9; T10; T15; T20; T25; T27; T30; T40 CB/600 4.0 x 050 mm (25 pcs); 5.5 x 050 mm (25 pcs) 6.5 x 050 mm (25 pcs) CB/1800 2.0 x 025 mm; 2.5 x 025 mm; 3.0 x 025 mm; 4.0 x 025 mm; 5.0 x 025 mm; 6.0 x 025 mm 763 CB/490 PH1 x 050 mm (25 pcs) PH2 x 050 mm (25 pcs) PH3 x 050 mm (25 pcs) 11.100 CB/850 M5; M6; M8 CB/590 PZ1 x 050 mm (25 pcs) PZ2 x 050 mm (25 pcs) PZ3 x 050 mm (25 pcs) CB/860 NO.6; NO.8; NO.10 CB/1900 4.0 x 050 mm (25 pcs); 5.0 x 050 mm (25 pcs) 6.0 x 050 mm (25 pcs) CB/870 TW1; TW2; TW3 F26/ (C-PLUS Bitsholder); F26/BR (Ratchet for Bits); /02 (Bitsholder); /7010 (Socket Adaptor) Ceta Form SB Bits Program /02 (10 pcs) /0842 (10 pcs) /7010 (10 pcs) If you would like to order empty screwdriver bits merchandiser, please use item code SFCB00. Please contact us to order with customized contents. The Ceta SB bit program that aims to increase circulation at sales points, contains a selection of our fastest moving bits displayed on new designed blister packs. All the blister packs in this program feature; 2 Piece content in each pack. A Hanging hole for display on merchandiser hooks. Identificational sticker which contains the sizes on the front side and barcode on the reverse side for usage in POS systems. Color-coding system for quality distinction of bits. Yellow for TIN, white for Torsion and blue for standard bits. SB cards are available for all 25 and 50 mm bits included in Ceta bits program. TIN Standard Torsion 36