NorthEast Transportation Training and Certification Program (NETTCP) Course Registration Form



Similar documents
Asphalt Pavement Association Of Michigan Selecting the Right Mix Atrium Drive, Suite 202 Okemos, MI

CHAPTER 4 CONCRETE TRAINING AND QUALIFICATIONPROGRAM

Inspections: Central Laboratory of the Regions

Table of Contents. Introduction and Purpose Technician Certification Programs... 4

CONSTRUCTION INSPECTOR CERTIFICATION PROGRAM

C. Section TESTING LABORATORY SERVICE.

MATERIALS CERTIFICATION SCHOOLS

Oh No, We Got an Airport Job! Contractor Quality Control. Investment in Staff, Labs and Equipment. We ve Come A Long Way.

MATERIALS CERTIFICATION SCHOOLS

Quality Assurance Program. June by Texas Department of Transportation (512) all rights reserved

MATERIALS CERTIFICATION SCHOOLS 2016

Comparison of Results of SHRP and Conventional Binder Tests on Paving Asphalts

Asphalt Institute Technical Bulletin. Laboratory Mixing and Compaction Temperatures

Testing and appraisal of Lucobit polymer effect as an additive on asphalt mixture performance

QUALITY ASSURANCE PROGRAM (QAP) City Rohnert Park

Section 300 Base Courses

HIGHWAYS DEPARTMENT GUIDANCE NOTES ON ROAD SURFACE REQUIREMENTS FOR EXPRESSWAYS AND HIGH SPEED ROADS

MDOT Construction Field Services Update MDOT LAP/Consultant Construction Kickoff Meetings

SEAUPG Annual Meeting Williamsburg, VA Thursday, November 19, 2015

Construction Materials Testing. Classes of Test

COMPACTING BITUMINOUS SPECIMENS USING THE SUPERPAVE GYRATORY COMPACTOR (SGC)

SPECIAL NOTE FOR ASPHALT WATERPROOFING MIX FOR BRIDGE-DECK OVERLAYS AND ADJACENT APPROACHES

EVALUATION OF ASPHALT BINDER CHARACTERISTICS OF TYPICAL ONTARIO SUPERPAVE CRM AND RAP-HMA MIXTURES

Quality control: Annex-A.

Construction Management Program

Example Specification for Concrete using Current Building Code Requirements

The AASHO Road Test site (which eventually became part of I-80) at Ottawa, Illinois, was typical of northern climates (see Table 1).

6 QUALITY CONTROL PROCEDURES

SECTION 334 (Pages ) is deleted and the following substituted: SECTION 334 SUPERPAVE ASPHALT CONCRETE

MID-ATLANTIC REGION TECHNICIAN CERTIFICATION PROGRAM

Laboratory Evaluation of Asphalt Concrete Mixtures from Rt.33 in Rochester, NY

Principles of Resolving Test Result Differences. Presented by Cindy Rutkoski Rocky Mountain Asphalt Education Center Instructor

STATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENTAL SPECIFICATION 888 PORTLAND CEMENT CONCRETE PAVEMENT USING QC/QA.

CHAPTER 2 AGGREGATE TECHNICIAN TRAINING AND QUALIFICATION PROGRAM

A View From The Bureau of Materials & Physical Research. IAPA March 2015 Matt Mueller, PE BMPR Illinois Dept of Transportation

SPECIFIC GRAVITY OF COARSE AGGREGATE AASHTO T 85

MoDOT Technician Certification Course Calendar MoDOT Technician Certification Program (TCP)

CONCRETE: CONTRACTOR S QUALITY CONTROL PLAN

Pavement Thickness. esign and RCC-Pave Software. Roller-Compacted Concrete Pavement: Design and Construction. October 24, 2006 Atlanta, Georgia

Hello viewers welcome to lesson 4.7 which is on pavement materials part IV and in this lesson we will be covering bituminous binders.

SECTION 311 PLACEMENT AND CONSTRUCTION OF CEMENT TREATED SUBGRADESOIL CEMENT BASE COURSE

Chapter 8 Design of Concrete Mixes

Quality Assurance Concepts. Outline

Acceptance Codes APPENDIX - A. Acceptance Criteria

Development of a Crumb Rubber Modified (CRM) PG binder Specification

Advancements in Permeable Pavements

High-Speed Nondestructive Testing and Intelligent Construction Systems

Rutting Based Evaluation of Asphalt Mixes

Apr 17, 2000 LAB MANUAL

Shotcrete Quality Control and Testing for an Underground Mine in Canada

Performance Graded Asphalt Binders Bob Horan, P.E. Consulting Engineer Mechanicsville, VA

Hot Mix Asphalt Test Result Verification and Dispute Resolution

Development of Laboratory Performance Test Procedures and Trial Specifications for Hot Mix Asphalt: Final Report

NRMCA Quality Certification. Ready Mixed Concrete Quality Management System. Certification Criteria Document

Work Type Definition and Submittal Requirements

CHAPTER 2 AGGREGATE TECHNICIAN TRAINING AND QUALIFICATION PROGRAM

MID-ATLANTIC REGION TECHNICIAN CERTIFICATION PROGRAM. Maryland State Highway Administration Technician Certification Renewal Policy January 2006

Quality Assurance Program for Design-Bid-Build Projects. January by Texas Department of Transportation 512/ All Rights Reserved

On Bituminous Mix Design

Schedule of Accreditation Issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

DEVELOPMENT OF A TESTING TEMPERATURE TO BE USED WITH THE HAMBURG WHEEL TRACKING DEVICE ON ASPHALT MIXTURES THAT UTILIZE PERFORMANCE GRADE BINDERS

South Dakota QC/QA Asphalt Concrete Training Manual January 2015

Introduction. Emulsify with water. Asphalt Emulsions 101. Asphalt Binder Properties. Why Heat Asphalt? So It Can Be:

Florida s Experience with Crumb Rubber

Commonwealth of Pennsylvania PA Test Method No. 632 Department of Transportation October Pages LABORATORY TESTING SECTION. Method of Test for

ASPHALT, CONCRETE, SOILS

FIELD SAMPLING AND TESTING MANUAL TESTING PROCEDURES FOR ALL TESTS

GRADATION OF AGGREGATE FOR CONCRETE BLOCK

MINIMUM QUALITY CONTROL PLAN FOR FIELD PLACEMENT OF LATEX MODIFIED MORTAR OR CONCRETE WEARING SURFACE

Final 1 st Edition January 2006 A GUIDELINE FOR THE DESIGN AND CONSTRUCTION OF ASPHALT PARKING LOTS IN COLORADO

DIVISION 300 BASES SECTION 304 AGGREGATE BASE COURSE DESCRIPTION MATERIALS CONSTRUCTION REQUIREMENTS

EVALUATION OF SASOBIT FOR USE IN WARM MIX ASPHALT

SECTION 18 - CAST IN PLACE HIGH PERFORMANCE CONCRETE (HPC)

AGGREGATE TECHNICIAN TRAINING MANUAL

INDIANA DEPARTMENT OF TRANSPORTATION QUALIFIED LABORATORY AND TECHNICIAN PROGRAM

STUDY OF THE BEHAVIOUR OF BITUMINOUS MIXTURES RESISTANT TO FUEL

SPECIAL INSPECTION AND TESTING AGREEMENT INTERNATIONAL BUILDING CODE

NOTE: FOR PROJECTS REQUIRING CONTRACTOR MIX DESIGN, THE DESIGN PROCEDURES ARE SPECIFIED IN THE SPECIAL PROVISIONS OF THE CONTRACT.

State of Illinois Department of Transportation Bureau of Materials and Physical Research POLICY MEMORANDUM Springfield

SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION CONCRETE BONDING COMPOUND.

Treatment of a surface or structure to resist the passage of water in the absence of hydrostatic pressure. presence of hydrostatic pressure.

PROPERTIES AND MIX DESIGNATIONS

A REVIEW OF AGGREGATE AND ASPHALT MIXTURE SPECIFIC GRAVITY MEASUREMENTS AND THEIR IMPACTS ON ASPHALT MIX DESIGN PROPERTIES AND MIX ACCEPTANCE

Period #14 Notes: BITUMINOUS MATERIALS (I)

EXPERIMENT NO.1. : Vicat s apparatus, plunger

Standard for GDOT Hot Mix Asphalt Technician Training and Qualification Program. Developed from AASHTO DESIGNATION: R

QUALITY ASSURANCE PROGRAM

AGREGADOS RECICLADOS MITOS Y REALIDADES

ENGINEERED QUARTZ STONE

Guide Specification Precast Concrete Products

Standard Test Procedures Manual

Construction Specifications for Keyhole Pavement Coring and Reinstatement

Transcription:

(NETTCP) Course Registration Form Interim Certification (Cost $300 members / $425 non-members) HMA Plant Technician* HMA Paving Inspector* Soils & Aggregate Inspector* Soils & Aggregate Lab Technician* Concrete Technician* Concrete Inspector* Drilled Shaft Inspector Driven Pile Inspector Subsurface Inspector PG Asphalt Binder Laboratory Technician *Requires a completed (select from following pages) Name: Cell Phone: P.O. Box: Home Street: City: State: Zip: Phone: P.O. Box: Street: City: State: Zip: Candidate s Signature*: Last 4 Digits of Cell Phone: *Signatures indicate that the candidate is aware of all NETTCP Policies including the Photograph Policy, the Refund Policy and the Cancellation Policy. Information mailed to: Home Business Note: Manuals cannot be shipped to a PO Box. Instructions 1. Fill out registration form completely (both addresses, zip codes, etc.). 2. If required, attach (see appropriate certification section). 3. If applying for a HMA Paving Inspector or Soils and Aggregate Inspector Interim Certification a copy of your nuclear gauge certification must be submitted. 4. If applying for a Concrete Technician Interim Certification a copy of your current ACI Grade 1 Field Certification must be submitted. 5. Enclose a check made out to NETTCP for the full amount and forward all forms and check to the address shown below. 6. NETTCP accepts Visa, Mastercard and American Express credit cards for online orders, visit www.nettcp.com.

Soils and Aggregate Inspector Certification Note: A qualified holder of a Soils and Aggregate Inspector Certification who is signing this form must be sure that the candidate meets the required prerequisites. Qualified holders are referred to the NETTCP Sign Off Policy. Item AASHTO Description Approved By Cert Date 1 T2 Standard Practice for Sampling Aggregates 2 T248 Reducing Sample of Aggregate to Testing Size 3a T310 In Place Density and Moisture of Soil and Soil Aggregate by Nuclear Methods 3b T99 or T180 Or 3b Moisture Density Relation of Soils

PG Asphalt Binder Laboratory Technician Certification Note: A qualified holder of a PG Asphalt Binder Laboratory Technician Certification who is signing this form must be sure that the candidate meets the required prerequisites. Qualified holders are referred to the NETTCP Sign Off Policy. Item AASHTO Description Approved By Cert Date 1 T240 Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin Film Oven Test) 2 R28 Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) 3 T316 Viscosity Determination of Asphalt Binder using Rotational Viscometer 4 T315 Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) 5 T313 Determining Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) 6 T228 Specific Gravity of Semi Solid Bituminous Materials Participants attending the course have the option of taking the Direct Tension (DT) performance test and written examination for DT certification. All participants will be given classroom instruction on the DT. Those participants who are seeking certification for the DT are required to complete section #7 below. 7 T314 Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) Equipment Experience Direct Tension Apparatus Manufacturer: Model Number:

Hot Mix Asphalt Plant Technician Certification Name: Note: A qualified holder of a Hot Mix Asphalt Plant Technician Certification who is signing this form must be sure that the candidate meets the required prerequisites. Qualified holders are referred to the NETTCP Sign Off Policy. Item AASHTO Description Approved By Cert Date Approved By Cert Date 1 T2 Sampling of Aggregates 2 T248 Reducing Field Samples of Aggregate 3 Hot & Cold Bin Sampling 4 T27 Sieve Analysis of Aggregate 5 T168 Sampling Paving Mixtures 6 T164 or T308 Quantitative Centrifuge Extraction or Ignition Oven 7 T30 Sieve Analysis of Extracted Aggregate (Wet or Dry) 8 T312 Fabricating SuperPave Specimens 9 HMA and Binder Temperature

Hot Mix Asphalt Paving Inspector Certification Note: A qualified holder of a Hot Mix Asphalt Paving Inspector Certification who is signing this form must be sure that the candidate meets the required prerequisites. Qualified holders are referred to the NETTCP Sign Off Policy. Item AASHTO Description Approved By Cert Date 1 Surface Preparation for HMA Pavements 2 Placement and Compaction of HMA Pavements 3 Field Temperature Measurements of Hot Mix Asphalt 4 ASTM D2950 Density of Bituminous Concrete in Place by Nuclear Methods

Concrete Technician Certification Note: A qualified holder of a Concrete Technician Certification who is signing this form must be sure that the candidate meets the required prerequisites. Qualified holders are referred to the NETTCP Sign Off Policy. Item AASHTO Description Approved By Cert Date 1 T2 Sampling Aggregates 2 T248 Reducing Field Sample Sizes of Aggregate to Testing Size 3 T27 Sieve Analysis of Fine and Coarse Aggregates 4 T255 Moisture in Aggregate by Drying

Concrete Inspector Certification Note: A qualified holder of a Concrete Inspector Certification who is signing this form must be sure that the candidate meets the required prerequisites. Qualified holders are referred to the NETTCP Sign Off Policy. Item AASHTO Description Approved By Cert Date 1 Reading and Understanding Plans, Shop Drawings and Specifications 2 Basic Knowledge of Concrete (components, batching, mixing, admixtures, slump, unit weight, strength and air content) 3 Pre placement Operations (forms, sub grade, reinforcement and equipment) 4 Placement Operations (delivery, consolidation and finishing) 5 Post placement Operations (curing and repair)

Soils and Aggregate Laboratory Technician Certification Note: A qualified holder of a Soils and Aggregate Laboratory Technician Certification who is signing this form must be sure that the candidate meets the required prerequisites. Qualified holders are referred to the NETTCP Sign Off Policy. Item AASHTO Description Approved By Cert Date 1 T11 Material Finer than 0.75mm (#200) Sieve in Mineral Aggregates by Washing 2 T27 Sieve Analysis for Fine and Coarse Aggregates 3 T84 Specific Gravity and Absorption of Fine Aggregates 4 T85 Specific Gravity and Absorption of Coarse Aggregates 5 T99, T180 Moisture Density Relation of Soils (either one) 6 T248 Reducing Field Samples of Aggregates to Testing Size 7 T255 Total Evaporable Moisture Content by Drying