December 2013 January 2014 The Source for Helicopter Maintenance Professionals Formerly Helicopter Painting Avionics Troubleshooting Part II Helicopter Accessory Gearboxes PRSRT STD U.S. POSTAGE PAID PERMIT NO. 546 Bolingbrook, IL Troubleshooting Helicopter Starting Systems HelicopterMaintenanceMagazine.com
airframe Photos Courtesy of SureFlight LLC Helicopter Painting 101 DeWitte Binkley, General Manager, SureFlight LLC Contributing Author Painting helicopters is a whole different ballgame when compared to painting their fixed-wing counterparts. Owners, pilots and passengers can see and touch nearly every surface of a helicopter, which in turn puts great demands on helicopter painters and paint products. In addition, rotorblade wash pushes heat exhaust directly onto the painted surfaces, and rotors stir up all manner of particles that test the durability of coatings. Also, unlike fixed-wing aircraft, helicopters have a variety of surfaces and added equipment jutting from the main body these unique surfaces and add ons demand special care. With all of that in mind, and with my 40 years experience in painting aircraft, I can offer advice on proper preparation and painting for helicopters. What qualifies you to speak on helicopter painting practices? SureFlight, located about 30 miles west of Philadelphia International Airport, provides full custom new paint jobs for fixed-wing and rotor aircraft as well as small repair painting, changing of accent stripe colors, or changing of N-numbers. The company also provides interior services. Customers include other regional repair stations, regional aircraft suppliers and OEMs as well as direct owner/operators. As SureFlight s general manager, I lead a team of top-notch technicians in providing exquisite aircraft exterior and interior finishes. I ve been painting aircraft for 40 years, and have devoted my career to aircraft refinishing. What are the major differences between fixed-wing aircraft and helicopters that affect the painting process? Helicopters have a variety of uses. Their roles include executive/vip transport, medical support, offshore support, fire fighting and law enforcement. They also can undertake paramilitary and military roles. As a result, helicopters often have specialized add ons to the exterior body. Fixed-wing aircraft, on the other hand, have very few components that require actual removal during preparation and painting. Helicopters demand expertise in removal and replacement of these parts, each of which requires specific care. In addition, when you enter a fixed-wing aircraft, many passengers just walk up an airstair and go right in without paying too much attention to the skin. With a helicopter, you can walk up to it at any angle, at any level. The helicopter has to be perfect through 360 degrees. You are touching the helicopter and can see everything as you enter, so attention to detail in the painting process must be extremely high. On fixed-wing aircraft, the best technician in a crew typically paints at and around the entranceway. That approach does not work for helicopters, where all surfaces are close by and in view. 6 HelicopterMaintenanceMagazine.com December 2013 January 2014
Rolls-Royce M250 Authorized Maintenance, Repair & Overhaul Center AMROC We Are the experts! contact us @ info@aeromarusa.com visit us @ www.aeromarusa.com visit our entire portfolio @ www.itp.es
airframe Photos Courtesy of SureFlight LLC Sikorsky S-76 Being Prepped With an Agusta AW139 in the Background Sikorsky S-92 Stripped and Wrapped Describe the ideal process for painting a helicopter. Helicopter painting is an intensive, detailed process. In our shop, every exterior part comes off of the helicopter during preparation every cowling, every access panel and is individually addressed. We basically take that helicopter apart, do all of the preparation work and paint the removed parts individually using the base color. Then we reinstall the parts to perform all of the layout work, making sure that everything lines up correctly. It all starts with preparation. The biggest thing is to prep properly. That includes removing old coatings down to the base and working from scratch to build everything back up. Should we worry about various skin materials when performing preparation and painting? Yes! Helicopter surfaces may include aluminum, aluminum composites, carbon fibers, Kevlar, etc. It is crucial to identify the materials to be worked on. Treating composites or Kevlar with a chemical stripper can cause major, expensive problems. How does heat affect the helicopter preparation and painting process? With helicopters, heat damage can occur at any point past the exhaust cowlings. Almost instantly, exhaust is pushed right back down onto the airframes, especially the tail booms, by the main rotorblade wash. Tail booms take incredible amounts of beating from the heat. Of course, with turbine engines, soot is another major concern. With a fuel-oil mixture funneling through the turbine and exhaust, the incredibly hot, burnt oil dumps right down on top of the tail. Heat like that can bake the resins right out of composites, so keep an eye on those materials. Depending on the material composition of the helicopter skin, old coatings can be chemically stripped, then the material can be checked for corrosion and other damage. When encountering composite material, we sand it and then look for cracks and stress. Paint Parts Helicopter Parts 8 HelicopterMaintenanceMagazine.com December 2013 January 2014
A Global Support and Training Network You Asked, We Delivered. AgustaWestland is a world-class helicopter manufacturer, committed to expanding its global support and training network. We have invested significantly in extending the capability of our Training Academies in Sesto Calende, Italy and Philadelphia, USA, opening new Fleet Operations Centres in the United Kingdom and the United States of America. We have added new distributors, service centres and partners in the Middle East, Far East and Africa and opened a new Training Academy in Malaysia. We are working closer with our customers to ensure access to our network of facilities, services and highly skilled Customer Support and Training specialists, wherever they operate. LEADING THE FUTURE agustawestland.com
airframe Painting Perfection What effect does cleaning have on a helicopter coating? Cleaning brings positives and negatives. With all of the soot and other material that can build on the skin during takeoff, flight and landing, a helicopter s exterior must be cleaned after each use. That can wear a coating. You want a good paint product that doesn t mind getting cleaned every day something very durable. How can clearcoats combat the negative effects of cleaning? I like using clearcoats because of the durability and the depth of image they provide. The helicopter surface is being washed and polished all the time, so with a good clearcoat, you are not affecting the topcoat s pigmentation you are just cleaning and polishing your clear. When we spray our colors, we usually put a coated clear on a color right away as a wet-on-wet process. Then we go back to sand it and add two more coats of clear. When a helicopter leaves our shop, it has three coats of clear. That gives longevity to the paint job for helicopters that have to deal with heat, dirt, cleaning and polishing every day. How does weight factor into the painting process? I m seeing customers place more and more equipment into and onto their helicopters to keep pace with how their fixed-wing aircraft are outfitted. Of course, that adds weight. With that in mind, it helps to be conscious of weight when applying filler use only as much as you need. The basecoat can consist of a crosscoat or two, and with the addition of color you are just looking for uniformity. Let your gloss and depth come out via the clearcoat. Clearcoats are lighter than basecoat colors, and provide the finish and durability, so don t skimp there. Overall, the entire paint job for a helicopter may only consist of 10 gallons, and a portion of that is lost to the atmosphere during spray application. So painting ultimately adds little weight to the aircraft. How important is training in helicopter painting? In my shop, we have 12 technicians and every one of them is trained each year by the coatings manufacturers. With the need to remove and replace components, identify the various materials and ensure that the entire helicopter surface is pristine, training to develop and maintain a skilled crew is all important. Are the current coating offerings sufficient? I ve been painting aircraft since I was 16 years old, and as long as you follow manufacturers guidelines and use the right equipment, the coatings are the best they have ever been. As opposed to the automotive industry, which uses water-based paint but still employs solid-based clearcoats to obtain the desired finishes, aviation has figured out a better way. We use aerospace coatings from several manufacturers, but recently painted an extremely detailed Agusta Westland AW139. We applied six different colors and then clearcoat, and used a mix of Sherwin-Williams SKYscapes polyester urethane basecoat and its Acry Glo acyclic urethane to apply everything in the color scheme. In general for aviation painting, the pigments and resins are solid based as are the clearcoats, but are within all required VOC limits throughout the United States. The aircraft-finishing industry is on top of things nowadays. Depending on the quality of the work and the level of afterjob care, a helicopter paint job can last from four to 10 years. As general manager, DeWitte Binkley leads SureFlight s team of highly-trained technicians to provide exquisite aircraft exterior and interior finishes. Located in Coatesville, PA, Binkley was SureFlight s first employee and a foundational part of its management team. Prior to joining SureFlight, he served for 22 years as a supervisor at Sikorsky s Keystone Helicopter. Prior to Keystone, he managed Agusta Westland s paint shop. Binkley s career started with Atlantic Aviation in Wilmington, DE, and he has been devoted to aircraft refinishing. 10 HelicopterMaintenanceMagazine.com December 2013 January 2014
4 4 is the number of signifi cant performance benefi ts Bell 407 and MD 600 customers will receive with the new Rolls-Royce Value Improvement Kit available through the M250 FIRST Network and Aviall. With this kit, you will 1) increase your range, 2) increase your service ceiling, 3) improve your performance and 4) consume less fuel. Contact your Aviall representative for details. Aviall Delivers. Proudly Keeping the World in Flight. aviall.com www.rolls-royce.com
airframe How to Choose the Right Aerospace Coatings for Helicopter Applications Julie Voisin, Global Product Manager, Aerospace Coatings, Sherwin-Williams Company Contributing Author Recently, Helicopter Maintenance magazine had a conversation regarding selection of the best helicopter external coatings with Julie Voisin, Global Aerospace Coatings products manager, Sherwin-Williams. Here are her thoughts. A regular painting regimen is a key requirement in any helicopter maintenance program. A new paint job not only enhances the aircraft s aesthetics, but most importantly, it protects its surfaces from wear, tear and corrosion, especially in the most punishing environments (think excessive heat damage right behind exhaust cowlings). Even the most durable, high-quality aerospace coating system will require thorough inspections and regular maintenance. Often a helicopter needs only minor touchups to its existing paint system; other times, an inspection will prove that an aircraft requires a complete repaint. And that, in all likelihood, means most every single external airframe piece. Quality coatings play a critical role in an aircraft s operation, regardless of the helicopter s mission: air ambulance and/ or medical transport, safety and law enforcement services, media observation, aerial firefighting, tourism/recreation, search-and-rescue, offshore oil and gas transport, or military operation. With the right maintenance, products and applications, any helicopter will look and fly great for years to come. Two Types of Topcoat Systems are Recommended A highly durable and often helicopter-specified aerospace coating is the multi-component polyester urethane topcoat system. Such is Jet Glo Express from Sherwin-Williams. It offers excellent coverage and protection, and as a result, can be found on all types of helicopters. Notable features include excellent flow and leveling, good buffing characteristics and outstanding gloss and DOI (distinctness of image). Another option is the latest basecoat-clearcoat technology, like Sherwin-Williams SKYscapes. These are state-of-the-art, modified polyester topcoats applied through a revolutionary process. They allow paint facilities to apply many colors in a shift and quickly move the helicopter or any aircraft through the painting cycle. The end result is great color and a highly durable finish, and both the shop and helicopter s owner save time and money. They are also ideal for special effect finishes such as micas and metallic. Using Color Tools and Custom Color Matching Color selection should be simple. Most aerospace coatings manufacturers provide color cards and fan decks for choices of brilliantly designed exterior and interior color systems. Many offerings include traditional aerospace colors as well as new bright, bold hues (the latter is now available in the SKYscapes collection, thanks to its specially formulated toners). Because helicopter owners are very particular about their craft s design and color scheme, Sherwin-Williams and other manufacturers offer custom color matching to handle complicated color schemes and extensive deliveries. Experienced color technicians are available in their color laboratories to meet any color challenge. For more information, visit www.swaerospace.com Julie Voisin is the global product manager, Aerospace Coatings, for the Sherwin-Williams Company. She has more than 15 years experience with one of the world s leading companies in the manufacture, distribution and sale of aerospace coating systems and products for general aviation, commercial airlines and military aircraft. 12 HelicopterMaintenanceMagazine.com December 2013 January 2014
Dedicated to Excellence in AdvAnced composite training SINCE 1983 25+ courses to choose from engineering manufacturing tooling repair ndi Reno, n V GR iffin, GA BRAzil UK 775.827.6568 www.abaris.com