Electronic Design Services

Electronic Design Services

Mindteck s Electronic Design Services (EDS) group has strong capabilities and domain knowledge to provide design and validation services and solutions to support product engineering requirements in electronics and mechanical engineering. Various phases of the Product Life Cycle (PLC) are supported through expertise, technologies and processes developed for new product design, verification and validation and system solutions. We help clients with cost effective implementation and product expertise for new product, product sustenance, obsolescence management, re-engineering and the reverse engineering of products. Phase Product Life Cycle and Electronic Design Service Offerings Introduction Growth Maturity Decline Concept and Development Launch/Adoption/Enhancement Utilization and Sustenance End of Life and Extension Product Sales Electronic Design Services Embedded Design Embedded V&V System Solutions Time Embedded Design Services Requirements, Proof of Concept, Prototyping, Hardware/Firmware/ Application dev (PCB, FPGA, RTOS, GUI), Mechanical design Embedded V&V Services Hardware test Jigs for PCB, Sub Systems (Customized, LabView based), Modeling & Simulation, Hardware-In-Loop simulation System Solutions Value engineering (Reliability, FMEA, Cost reduction) Reengineering, Reverse engineering, Certification, Obsolescence management

EMBEDDED DESIGN SERVICES The Electronic Design Services offerings range from concept to manufacturing, through comprehensive and robust product development and re-engineering services in design and development of products involving electronics, firmware and mechanical with prototyping and production support. Moreover, every client s product engineering requirements are supported by well-established methodologies and processes in Embedded Design, Verification and Validation and System Solutions. PCB Design n Schematics n Layout Design n BOM FPGA Design n RTL coding n Simulation n GUI n Application software n Middleware Hardware Design Software Design Embedded Design Services Mechanical Design Firmware Design n Industrial Design n 3-D Modeling n Detailed mechanical design n Prototyping (RPT) n Board Support Packages n Bootloader n Device Drivers n Porting n Protocol stack We re a Design Service Network (DSN) partner with Altera, which enables us to provide our clients with solutions using IP cores available under this partnership. For our clients, this value translates into faster solutions with IP cores and without any obligation to buy IP cores, plus low pricing of FPGA during the production stage. Our Embedded Design Services encompass product engineering support from concept to prototyping and manufacturing of new products, feature enhancement and technology upgrades through electronic hardware design, firmware design, software application development and mechanical design. The Group s embedded technology expertise helps clients develop customized product solutions, while our development methodology supports the incremental and requirement discovery model to match both client and market expectations. Hardware Design Services include schematic design, bill of material finalization, printed circuit board (PCB) design, prototyping and production support for customer-specific requirements. The key hardware design ranges from small footprint, power-optimized solutions to high-end, rugged systems built around various embedded processors and DSPs. High-speed Digital Design Analog Design Mixed-signal Design Power Design Embedded Firmware/Software include a broad range of software services relating to embedded systems programming and real time embedded systems software development, such as: Customization: Boot Loader and Board Support Packages Device Drivers Firmware and Diagnostics RTOS -VxWorks, Embedded Linux, QNX, WinCE GUI Development OS Porting Embedded Application Development Feature Enhancements Development and Porting of Protocol Stack Development of Wireless Stack

EMBEDDED DESIGN SERVICES Today, many of the high-speed and complex designs need the integration and flexibility that an FPGA can offer. The ability to be reconfigured enables the FPGAs to extend the life cycle of a custom product to suit the changing market needs. We have the right experience and capability to satisfy any phase of the product life cycle, including partial or complete architecture design, feature additions to existing designs, test bench development or functional verification. FPGA Design Services include design/development, RTL coding, test suite preparation, simulation and testing/verification. We provide turnkey development services in FPGA for high- speed bus interfaces, integration of modules, multi-million gates, and complex design and concept to specification to the chip and final board level target hardware. Mechanical Design Services addresses requirements for product engineering with 3D modeling and rapid prototyping techniques to provide early user experience during the product development cycle. Our expertise also includes reengineering and tear down analysis for product life extension. In tandem with our eco partner, we provide manufacturing and support for complete mechanical engineering requirements for New Product Development (NCD). With expertise in tools and customized processes, the Electronic Design Services group brings reliable, feature-rich products at competitive prices and the shortest development lead-time. Services also include: Engineering Design Industrial Design Computer-aided Design and Engineering Data Migration and Legacy Control Drawing Conversion

EMBEDDED VERIFICATION AND VALIDATION Embedded Verification and Validation (V&V) is essential for validating system functionality. Our services evaluate hardware, embedded firmware, application firmware and GUI. System n Functional n Performance n Usability n Manufacturability n Automation Mechanical n Fatigue n Vibration n Thermal Cycles Mechanical System Compliance n FDA Compliance n Software Safety n Risk Management Compliance Embedded V&V Validation Hardware Firmware Hardware n Board Interfaces n Devices n Functionality n Environmental n Conformance Firmware n Unit n Functional n Integration n Automation n Timing & Algorithm Validation n Tool Validation n Pre-Clinical n Validation Support Mindteck s Embedded V&V Services provide an independent and objective measure of applications or a product s performance and quality. Our expertise in various tools that are required for verification and validation of embedded systems are used across various industries, including Life Sciences, Medical, High-Tech and Automotive. We have also demonstrated test automation capability to several clients by leveraging our expertise in IT and the latest technologies. In the Verification and Validation space, Mindteck offerings range from developing test scripts, to delivering systems and performing test automation. We also conduct model-based testing and loop simulation for control modules. The test automation platforms, in particular, are built in-house and provide tremendous cost savings to our clients. The V&V services encompass: Functional and Performance of Hardware/Firmware/Software Automated, Diagnostics and Calibration Requirements Predictive Analytics requirement by Modeling and Simulation Mindteck s tools and methodology for V&V service offerings include: Hardware-in-loop simulation (HIL) Customized TestStand Modeling and Simulation Customized Test Jigs Python/PERL Scripts-based Automated UML-based Simulation LabView/Matlab/Simulink Third-party Labs for Environmental Tests

SYSTEM SOLUTIONS Our System Solutions address the system level perspective of product engineering, such as safety and reliability engineering, value engineering, obsolescence management, re-engineering and reverse engineering to support our customers during various phases of product life cycle. The team has expertise in cost reduction, reliability growth and has an established process for obsolescence management. n POC n Modeling and Simulation of subsystem n Rapid prototyping and algorithm development n Cost Reduction n BOM Optimization n PCB layout redesign n Re-engineering System Level Value Solutions Engineering System Solutions Safety and Reliability Management Engineering Obsolescence n Reliability and Safety analysis n Reliability growth, prediction and warranty analysis n Fail safe and High reliability solutions n Re-engineering n Reverse Engineering n Tear down analysis n Product Sustenance Our Electronic Design Services Group provides efficient and effective solutions for a variety of industries, including industrial automation, consumer electronics, hi-tech (semiconductor and smart energy), Life Sciences (medical devices/equipment, analytical and test and measurements instruments). Solutions Focus System-level Solutions Modeling and Simulation of Subsystem Rapid Prototyping and Algorithm Development Safety and Reliability Engineering Reliability and Safety Analysis (FMEA, FTA) Reliability Growth, Prediction and Warranty Analysis Fail-safe and High Reliability Solutions Value engineering Cost Reduction BOM Optimization Obsolescence management Re-Engineering Reverse Engineering and Tear down analysis Product Sustenance System Engineering Hazard Analysis MTBF ATEX SIL PCB Layout Redesign (layer reduction)

EMBEDDED DESIGN TECHNOLOGY Device Drivers UART, I2C, SPI, I2S,IrDA, Ethernet, USB, Serial, HDLC, T1/ E1, PCIe ADC, DAC Bluetooth, WLAN, EEPROM, NAND,NOR Flash, MMC/SD, LCD, Touch Screen Camera, TV, GSM/GPRS, Audio GPIO, Keyboard, Keypad, Mouse Tools Orcad, PADS, Allegro, Expedition, Eagle, Altium, CAM350 Viewer ModelSim, Xilinx ISE, Altera Quartus, Libero IDE,HyperLynxGHz SpectraQuest, Pspice, CVS, VSS FloTHERM, AnsysIcePak Kiel, IAR, CodeWarrior, LabView, GNU, Matlab, Simulink, Code Composer Applications Gas/Liquid Chromatograph, Mass Spectrometry Industrial Controller, PLC, Flow Meters, Test and Measurement Instruments Wireless, Sensor-based Applications Medical Equipment Language C, C++, C#, Java HTML, XML, PHP Perl Script, Python, Shell Script, Expect System Bus Interface VME, cpci, PCI, PCI-X, ATCA PCIe PCMCIA, CardBus COMExpress, SMARC, Qseven Processors Freescale, Xscale, Atmel, MIPS ARM 7/9/11, CORTEX, Intel, 8/16/32-Bit μc and SoCs, NEC, PIC, AMD, NVIDIA TI-MSP, OMAP, SHARC DSPs Protocols/Interfaces SCSI, SATA, USB 3.0, Ethernet, EtherCAT, VoIP Audio, Video, LVDS, HDMI,VGA SPI, I2C, UART, RS485, CAN, IEEE488, S/PDIF, I2S, FC, SD, emmc ModBus, Fieldbus, Wi-Fi, Bluetooth, ZigBee, GSM Operating System (OS) Embedded Linux, Android, GreenHills VxWorks, WinCE, Nucleus, QNX, OS-II RTOS, FreeRTOS Proprietary Kernels Diagnostics/Test Automation POST, Diagnostics H/W S/W Co-verification Modeling Environmental EMI/EMC/ESD, ATEX, SIL, CE, FCC

About Our People A team of experienced and competent engineers trained to drive excellence in embedded hardware, FPGA, firmware and mechanical product development services Optimum resourcing and staffing strategies to meet flexibility, scalability, right mix and competitive pricing Highly talented and skilled resources continually adopting cutting edge technologies Cross-cultural business orientation of resources Why Mindteck? One-stop solution for end-to-end product development and re-engineering Rapid prototyping solutions to meet market demands Excellent track record and references from clientele across geographies Strong alliances and partnerships with industrial leaders and international agencies. For more information, contact eds@mindteck.com. Or, simply scan the QR code. www.mindteck.com 2013 Mindteck All Rights Reserved EDS-B4PS-613 UNITED STATES INDIA SINGAPORE MALAYSIA BAHRAIN UNITED KINGDOM