Midland BT Updater After you downloaded the BT Updater setup application from the web site, double click on it and follow the installation procedure. The BTUpdater application is automatically installed under the Program menu (or Program file (x86) ), inside the Midland folder. Connect now the BT device to the PC using the USB cable provided in the box (same cable used on the wall charger to charge the unit). If your USB cable is the double version, be sure to connect only one BT unit at a time. Window will detect a new USB device and you will have two options: OPTION 1 - the device is recognized as Generic Bluetooth device (no Wizard window come up). To make the software work properly you need to update the USB driver following the procedure Manual installation of the USB driver. OPTION 2 - the New hardware installer Wizard come up, you need to follow the Wizard procedure. ATTENTION: Normally for VISTA and Window 7 follow the procedure explained on OPTION 1 1
Option 1: Manual installation of the USB driver Windows XP Windows Vista Go to the Control Panel and double click on the System icon. Windows 7 Go to the Control Panel and double click on the System and Maintenance icon. Go to the Control Panel, select System and Security and click on the System Windows XP Windows Vista Choose the Hardware tab and click on the Device manager button Windows 7 Select Device Manager from the list on the left. Click on the Device Manager on the left side of the window 2
Select Generic Bluetooth radio under the Bluetooth Radio device list Use the right button of the mouse to open up the menu and choose Update driver Select Generic Bluetooth radio under the Bluetooth Radio device list Use the right button of the mouse to open up the menu and choose Update Driver Software Windows XP Windows Vista and Windows 7 The Hardware Update Wizad window will came up and you choose No, no this time and click on Next button. Choose than Install form a list of specific location (advanced). The Update Driver Software window will came up and choose Browse my computer for driver software. 3
Choose Don t search, I will choose the drive to install (red arrow) and click on the Next button. Choose now Let me pick from a list of device drivers on my computer, and click on the Next button. Select Driver disk and from the new window click on the Browse button Click now on Driver disc button (A) and from the new small window on the Browse button (B). 4
Go to the Midland BT Updater folder (C:Programs/Midland/BTUpdater) and choose Win32 in the Driver folder Go to the Midland BT Updater folder (C:Programs/Midland/BTUpdater) or Program file (x86), choose the Drivers folder and select the Win32 or Win64 folder based on the Windows version you have. Windows XP Windows Vista e Windows 7 Select CSR BlueCore Bluetooth and click on Next button. The upgrade process will start Select CSR BlueCore Bluetooth and click on Next button The upgrade process will start 5
Windows XP, Windows Vista and Windows 7 When the update process will finish, you will find the BTNext unit, with the name CSR BlueCore Bluetooth under the Universal Serial Bus controllers list. Disconnect and reconnect the BTNext to the PC and open the BTnext Updater software, now you can use the software to manage the unit and update the firmware. Option 2: Wizard procedure Windows XP Windows Vista and Windows 7 The Hardware Update Wizad window will came up and you choose No, no this time and click on Next button. The Update Driver Software window will came up and choose Browse my computer for driver software. 6
Choose Install form a list of specific location (advanced). Click now the Browse button. Select Source for the best driver in this location and click the Browse button 7
Go to the Midland BT Updater folder (C:Programs/Midland/BTUpdater) and choose Win32 in the Driver folder Go to the Midland BT Updater folder (C:Programs/Midland/BTUpdater) or Program file (x86), choose the Drivers folder and select the Win32 or Win64 folder based on the Windows version you have. Windows XP Windows Vista e Windows 7 Click on the Next button and the upgrade process will start Click on the Next button and the upgrade process will start 8