ABB industrial drives ACS800, drive modules, 0.55 kw to 2000 kw

ABB industrial drives ACS800, drive modules, 0.55 kw to 2000 kw Technical catalogue PROFILE INDUSTRIES PRODUCTS APPLICATIONS EXPERTISE PARTNERS SERVICES

Type code structure 1 2 3 Type code Product series Drive modules Types and constructions Ratings Voltages Dimensions Hardware options ACS800-04 - XXXX - 2 + XXXX X04 3 5 7 4 Control connections and counications 5 6 Application software and prograing PC tools 7 8 9 Services and support Suary of features and options Contact and web information 2

Contents ABB industrial drives, drive modules ABB industrial drives...4 Drive modules main features...6 Technical specifi cation...8 Single drive modules, ACS800-04...9 Multidrive modules, ACS800...16 1 2 Brake options...24 EMC fi lter...28 Sine fi lters...30 du/dt fi lters...32 Standard r interface Standard I/O...34 Options Control panel...35 Optional I/O...36 Fieldbus control...37 Remote monitoring and diagnostics tool...38 Standard application software...39 Optional application software Control solutions for different applications...40 DriveSize...42 DriveAP...43 DriveWindow 2...44 DriveWindow Light 2...45 DriveOPC...46 3 4 5 6 Services and support...47 7 89 Table...48 www.abb.com/motors&drives...50 3

ABB industrial drives ACS800-04 - XXXX - 2 + XXXX X04 3 5 7 ABB industrial drives Industrial IT enabled ABB industrial drives are designed for industrial applications, and especially for applications in process industries such as the pulp & paper, metals, mining, cement, power, chemical, and oil & gas industries. ABB industrial drives are highly flexible AC drives that can be configured to meet the precise needs of these applications, and hence order-based configuration is an integral part of the offering. These drives cover a wide range of powers and voltages, including voltages up to 690 V. ABB industrial drives come with a wide range of inbuilt options. A key feature of these drives is prograability, which makes adaptation to different applications easy. Industrial design ABB industrial drives are designed with current ratings to be d in industrial environments for applications requiring high overloadability. The heart of the drive is DTC, Direct Torque Control, that provides high performance and significant benefits: e.g. accurate static and dynamic speed and torque control, high starting torque and long motor cables. Inbuilt drive options make the installation work fast and easy. ABB industrial drives are Industrial IT enabled. This guarantees the r that ABB industrial drives can be easily integrated into ABB Industrial IT systems. Drive modules Drive modules are designed to be built into a customer s own cabinet. The modules typically have an IP00 or IP20 enclosure class. ABB s module package also includes cabinet assembly documentation. Type code This is the unique reference number that clearly identifies your drive by construction, power rating voltage and selected options. Using the type code you can specify your drives from the wide range of options available, customer specific options are added to the type code using the corresponding + code. One of the most significant design criteria of ABB industrial drives has been the long lifetime. Wearing parts such as fans and capacitors have been selected accordingly. Together with the extensive protection features this results in excellent reliability in the demanding industrial market. Other products Please also see the separate technical catalogues ACS800 multidrive, code 3AFE68248531 EN, ACS800 single drives, code 3AFE68375126 EN. 4 Product series

ABB s module offering - coon features ABB industrial drive module products are meant for system integrators and/or OEMs who are making their own applications, which include the cabinet structure as well as the software features needed. ACS800 modules include everything that is required for a complete drive, there is always an inbuilt harmonic filtering choke, for example. There is also a wide selection of inbuilt options such as EMC filtering and different I/O and counications options. In addition to these a selection of external accessories is also available. All the modules can be mounted side by side. In addition to the modules being designed for cabinet assembly, cabinet assembly documentation is included. The documentation gives examples of different cabinet installations, examples of drawings, and hints on the selection of auxiliary equipment. The flexibility and prograability of the modules makes them very viable for various application needs in different areas of industry. ACS800-04 single drive modules ACS800-04 units are complete single drive module products that are optimised for assembly in customers own cabinets. The single drive configuration contains a rectifier, DC link and an inverter in one single AC drive unit. Single drive ACS800 multidrive modules The multidrive principle is based on a standard DC bus arrangement enabling single power entry and coon braking resources for several drives. There are several possibilities on the supply side starting from a simple diode supply unit up to highly sophisticated IGBT supply units. Rectifi er Inverter Inverter Inverter The multidrive construction simplifies the total installation and provides many advantages such as: savings in cabling, installation and maintenance costs space savings reduced component count and increased reliability reduced line currents and simpler braking arrangements energy circulation over the coon DC busbar, which can be d for motor-to-motor braking without the need for a braking chopper or regenerative supply unit. The coon supply of the multidrive enables the implementation of overall safety and control functions. Rectifi er DC link Inverter With their compact and modular design and wide range of powers, voltages and options, ABB multidrive modules offer optimised and simple cabinet installation. The power range is from 1.1 kw up to 2000 kw. The ACS800-04 is designed to minimise the amount of cabinet space d and to make cabinet assembly as easy as possible. The power range is from 0.55 kw up to 1900 kw. Product series 5

Drive modules main features Features Benefits Notes Compact and complete Compact size, everything integrated Less space and installation work required. No need to install extra components such as input chokes or EMC fi lter. Inbuilt harmonic filter in all ACS800 drives Wide range of options available Versatile braking options Optimised products for cabinet assembly User interface User-friendly customer interface Versatile connections and counications Extensive prograability Industrial design Wide power and voltage range Low harmonics, meaning less interference and less heating in cables and transformers. Filter also protects the drive from line side transients. Easier installation due to lower number of components. Standard solutions available from ABB that meets most of the customer needs. Always the optimal braking option available. In most types no need for external braking chopper thus reducing size and installation cost. Possible to any kind of customer specifi c cabinet. Easy to make the cabinet assembly saving time and money. Easy and fast coissioning and operation. Standard I/O covers most requirements. Connectable to coonly d fi eldbs. Flexibility. Possible to replace relays or even PLC in some applications. One product series suits everywhere meaning less training and fewer spare parts, and a standardised interface to drives Possibility for side by side mounting. Brake chopper inbuilt in all frame sizes (standard/optional). Control panel has clear, alphanumeric display with start-up assistant that guides through the start-up procedure. Easy to PC tools available for coissioning, maintenance, monitoring and prograing. Extensive standard and optional I/O. I/O fulfi lls PELV (EN 50178). Two levels of prograability: 1. Parameter prograing (standard) 2. Adaptive prograing (free block prograing) - Standard feature - More blocks available as options - All I/Os are prograable 6 Product series

Drive modules main features Features Benefits Notes Industrial design Robust main circuit design Suitable for heavy industrial. Components dimensioned for heavy duty and long lifetime. Extensive protections Galvanic isolation of I/O All terminals designed for industrial Reliable. Long motor cables can be d without extra output fi lters. Enhanced reliability, fewer process interruptions. Possibility to also protect motors and process. Safe and reliable operation without separate isolators and relays. Adequate size even for large aluminium cables. Advanced thermal model allows high overloadability. Several adjustable limits to protect other equipment also. Isolated input signals and relay outputs as standard. Worldwide approvals: CE, UL, cul, CSA, C-Tick, GOST R Right performance for every application DTC, accurate dynamic and static speed and torque control DTC - allows high overloadability and gives high starting torque DTC, fast control DTC, flux optimization and sophisticated motor model No need for special tools in I/O cabling. Safe products that can be d everywhere in the world. Excellent process control even without pulse encoder - improved product quality, productivity, reliability and lower investment cost. Reliable, smooth start without overdimensioning the drive. No unnecessary trips and process interruptions. Excellent motor and drive effi ciency - cost savings. DTC, mechanics friendly Less stress for mechanics improves reliability.. No shock torques. Fast reaction to load or voltage variations prevents tripping. Rides through power interruptions by using kinetic energy of the load. Optimal fl ux in the motor reduces losses. No torque ripple - minimized risk for torsional vibration. Both positioning / synchronizing control and normal speed / torque control available in the same hardware Made in ABB Global market leader in AC drives. Long experience. World wide service and support network Same hardware and similar r interface for different applications meaning less training and fewer spare parts as well as easier system design and documentation. Well proven, safe and reliable solutions. Application know-how. Professional support available around the world. Active oscillation damping. Product series 7

Technical specification ACS800-04 - XXXX - 2 + XXXX X04 3 5 7 Mains connection Voltage and power range Frequency Power factor Power factor ISU Efficiency (at nominal power) ACS800-04 ACS800-x04 Motors connection Voltage for > 500 V units Frequency Field weakening point Motor control Torque control: Open loop Closed loop Open loop Closed loop Speed control: Open loop Closed loop Open loop Closed loop 3-phase, U 2IN = 208 to 240 V, ± 10%, except multidrive and nxr8i ACS800-04 modules 3-phase, U 3IN = 380 to 415 V, ± 10% 3-phase, U 5IN = 380 to 500 V, ± 10% 3-phase, U 7IN = 525 to 690 V, ± 10% 48 to 63 Hz cosϕ 1 = 0.98 (fundamental) cosϕ = 0.93...0.95 (total) cosϕ 1 = 1 (fundamental) cosϕ = 0.99 (total) 98% 98% 97% with IGBT supply unit 3-phase output voltage 0...U 2IN/ /U 3IN/ /U 5IN/ /U 7IN please see Filter selection table for ACS800 under the du/dt fi lters on page 32 0...±300 Hz (0...±120 Hz with external du/dt or sine fi lters) (0...±100 Hz with inbuilt du/dt fi lters) 8...300 Hz ABB s Direct Torque Control (DTC) Torque step rise time: <5 ms with nominal torque <5 ms with nominal torque Non-linearity: ±4% with nominal torque ±1% with nominal torque Static accuracy: 10% of motor slip 0.01% of nominal speed Dynamic accuracy: 0.3...0.4%sec. with 100% torque step 0.1...0.2%sec. with 100% torque step Environmental limits Ambient temperature Transport Storage Operation ACS800-04 ACS800-x04 Cooling method: Altitude 0...1000 m 1000...4000 m -40...+70 C -40...+70 C -15...+50 C, no frost allowed 40...50 C at reduced output current (1% / 1 C) 0...+50 C, no frost allowed 40...50 C at reduced output current (1% / 1 C) Dry clean air without derating with derating ~ (1% / 100 m) (690 V units 1000...2000 m with derating) Relative humidity 5 to 95%, no condensation allowed Protection class IP00 standard for -04 and 04(M) frame sizes R7, R8 and nxr8i IP20 Standard for -04 frame sizes R2-R6 and option for some -04(M) variants Paint colour NCS 1502-Y (RAL 90021, PMS 420 C) Contamination levels No conductive dust allowed Storage IEC60721-3-1, class 1C2 (chemical gases), Class 1S2 (solid particles) Transportation IEC60721-3-2, Class 2C2 or 3C2* (chemical gases), Class 2S2 (solid particles) Operation IEC60721-3-3, Class 3C2 (chemical gases), Class 3S2 (solid particles without airinlet fi lters) C = chemically active substances S = mechanically active substances * = coated circuit boards Product compliance CE Low Voltage Directive 73/23/EEC with amendment 93/68/EEC Machinery Directive 98/37/EC EMC Directive 89/336/EEC with amendment 93/68/EEC Quality assurance system ISO 9001 and Environmental system ISO 14001 UL, cul 508A or 508C and CSA C22.2 NO.14-95, C-Tick, GOST R EMC according to EN 61800-3 /A11 (2000), EN 61800-3 (2004) 2 nd environment, unrestricted distribution category C3 - as option in ACS800-04 up to frame size R8 1 st environment, restricted distribution category C2 as option up to 1000 A input current Available options are shown in the Suary of features and options table. Please see pages 48-49. 8 Product series

Single drive modules ACS800-04/-04M ACS800-04 single drive modules ACS800-04 drives are single drive modules that are optimised for building into customers own cabinets. They have been designed to minimise the cabinet space d, make cabinet assembly as easy as possible, and give maximum flexibility. The power range is from 0.55 kw up to 1900 kw. All the drives, regardless of the power and voltage, have the same customer interface and I/O making system design and training easier. The units have everything necessary inbuilt. That includes, for example, inbuilt chokes for harmonic filtering as standard, inbuilt braking chopper and inbuilt EMC filtering (both are optional in some frame sizes), making cabinet assembly easier. There is also a wide selection of different I/O and counications options. In addition to these there is a selection of external accessories available. To optimise the of the cabinet space, most of the ACS800-04 modules can be mounted side by side. The modules themselves are not only designed for cabinet assembly, but covering documentation is also available. This documentation provides examples of different cabinet installations and circuit drawings, and hints on the selection of auxiliary equipment. Optimised for cabinet assembly - frame sizes R2 - R6 The R2 - R6 frame size units are designed for cabinet wall mounting. The power range starts from 0.55 kw and extends up to 132 kw. The voltage range is from 230 V up to 690 V. The enclosure class of the modules is IP20 as standard. Compact power - frame sizes R7 and R8 Frame size R7 and R8 modules have a very narrow bookshelf design. They are designed to be mounted either on the cabinet wall or floor. The power range is from 45 kw up to 560 kw and the voltage range is from 230 V up to 690 V. The enclosure class is IP00. The modules have top entry for the input power connections to optimise the of space and cable routing in the cabinet. The output power connections are on the side to make access to the cables as easy as possible and to give sufficient space for cable bending. The outputs can be placed either on the left or right hand side of the module. I/O connections can be located in the most optimal place in the cabinet as they are in a separate unit. Flange mounting is available as an option. It separates the airflow to the control section and the heatsink, and makes it possible to mount the heatsink of the drive outside the enclosure. With this option the heatsink side of the module has IP55 enclosure class. Prevention of unexpected start-up (complies with EN954-1, category 3) is also available as an option. Drive modules 9

Ultimate flexibility - ACS800-04M variant with frame sizes R7 and R8 The ACS800-04M is similar in many respects to the frame size R7 and R8 ACS800-04, but it has even more variants available. For this reason the configuration rules are also different. In addition to the normal bookshelf mounting, the ACS800-04M also offers flat (sideways) mounting as an alternative for installations where the available depth inside the cabinet is limited. In frame size R7 the ACS800-04M also offers a version where the motor connections are from the bottom of the module. This makes it possible to a narrower cabinet in some installations. In addition to the normal IP00 enclosure, the ACS800-04M offers also IP20 as an option for some mounting variants. Prevention of unexpected start-up (complies with EN954-1, category 3) is also available as an option. High ratings - frame sizes D4-n*D4 supply side and n*r8i inverter units The construction includes separate IP00 enclosure supply and inverter modules. The modules are of the extremely compact bookshelf design, making the width of the drive very competitive. The wheels in every module make manoeuvring very easy. Modules are also connected to the separate cabling part by quick connectors, enabling each module to be pulled out quickly and easily by just disconnecting a couple of bolts without the need to disconnect any cables. The inverter modules and supply modules are parallel connected. Supply units have load switch as standard; a contactor is also available as an inbuilt option. The supply module structure is designed to be either 6-pulse or 12-pulse. The control unit and I/O connections can be located in the most optimal place in the cabinet as they are in a separate unit. The power range for these higher rated ACS800-04 packages is from 400 kw up to 1900 kw, and the voltage range is from 380 V up to 690 V. Main standard hardware features: Coon: Optimised design for cabinet assembly Easy access to power terminals Compact design Side by side mounting (excl. versions with side exit) Harmonic filtering choke inside Long lifetime cooling fan and capacitors Extensive, prograable I/O with galvanically isolated inputs Three I/O and fieldbus extension slots inside Large power terminals allowing of a wide range of cable sizes Block prograing possibility Frame sizes R2 - R6: Power range 0.55 to 132 kw Voltage range 230 to 690 V Mounting on the cabinet wall IP20 enclosure class Inbuilt brake chopper (R2-R3; at 690 V also R4) Easy access to I/O terminals (control board inside the module) Frame sizes R7 & R8: Power range 45 to 560 kw Voltage range 230 to 690 V 10 Drive modules

Mounting on the cabinet wall or floor IP00 enclosure class Input power cable connection from the top for optimising cabinet size and cabling inside cabinet Motor cable connection on the side of the module (side selectable) for maximized flexibility and optimised cabinet design (with ACS800-04M, frame size R7, bottom exit can also be selected) Modular design allowing a wide variety of variants Free location and easy access of I/O terminals (control board outside the module) Instructions available for installing modules in Rittal TS8 cabinet Frame sizes nxd4 + nxr8i: Power range 400 to 1900 kw Voltage range 380 to 690 V Mounting on the cabinet floor IP00 enclosure class Wheels to make module manoeuvring easy Load switch du/dt filters inside of the module Coon mode filters for motor protection Plug connector mechanical kits Free location and easy access of I/O terminals (control board outside the module) Options for ACS800-04 Inbuilt options: Analogue and digital I/O extension modules Fieldbus modules Pulse encoder interface module Motion control and other control solution software Prevention of unexpected start-up Control panel Options for frame sizes R7 & R8: Inbuilt brake chopper IP20 enclosure class (for some -04M mounting variants) EMC filter for 2 nd environment, unrestricted distribution according to EN 61800-3 (Category C3) EMC filter for 1 st environment, restricted distribution according to EN 61800-3 (Category C2) (-04M only requires also EMC enclosure) Bottom exit of motor cables (frame size R7-04M only) Flat (= sideways) mounting (-04M only) Various output busbar options (ACS800-04M) Coon mode filters for motor protection Options for frame sizes nxd4 + nxr8i: Brake chopper module Inbuilt contactor Examples of external options: Control panel and mounting platform Brake resistor Output filters Ethernet module Control panel mounting platform for cabinet door or inside the cabinet Front-end AC fs (n*r8i only) Air circuit breaker (n*r8i only) DC-fs, f bases, mechanical kits (n*r8i only) Mechanical accessories in Rittal TS8 (n*r8i only) IP21 - IP54 cabinet door / roof mechanical kits Mechanical cabinet accessories kits Options for frame sizes R2 - R6: Inbuilt brake chopper (R4 - R6) EMC filter for 2 nd environment, unrestricted distribution according to EN 61800-3 (Category C3) EMC filter for 1 st environment, restricted distribution according to EN 61800-3 (Category C2) Flange mounting Drive modules 11

Ratings and dimensions ACS800-04 ACS800-04 - 0XXX - 2 + XXXX Nominal No-overload Light-overload Heavy-duty Noise Heat Air ratings level dissipation flow Type code Frame I cont. max I max P cont. max I N P N I hd P hd size A A kw A kw A kw dba W m 3 /h U N = 230 V (Range 208-240 V). The power ratings are valid at nominal voltage 230 V. 5.1 6.5 1.1 4.7 0.75 3.4 0.55 62 100 35 ACS800-04-0001-2 R2 6.5 8.2 1.5 6 1.1 4.3 0.75 62 100 35 ACS800-04-0002-2 R2 8.5 10.8 1.5 7.7 1.5 5.7 1.1 62 100 35 ACS800-04-0003-2 R2 10.9 13.8 2.2 10.2 2.2 7.5 1.5 62 120 35 ACS800-04-0004-2 R2 13.9 17.6 3 12.7 3 9.3 2.2 62 140 35 ACS800-04-0005-2 R2 19 24 4 18 4 14 3 62 160 69 ACS800-04-0006-2 R3 25 32 5.5 24 5.5 19 4 62 200 69 ACS800-04-0009-2 R3 34 46 7.5 31 7,5 23 5.5 62 250 69 ACS800-04-0011-2 R3 44 62 11 42 11 32 7.5 62 340 103 ACS800-04-0016-2 R4 55 72 15 50 11 37 7.5 62 440 103 ACS800-04-0020-2 R4 72 86 18.5 69 18.5 49 11 65 530 250 ACS800-04-0025-2 R5 86 112 22 80 22 60 15 65 610 250 ACS800-04-0030-2 R5 103 138 30 94 22 69 18.5 65 810 250 ACS800-04-0040-2 R5 141 164 37 132 37 97 30 65 1190 405 ACS800-04-0050-2 R6 166 202 45 155 45 115 30 65 1190 405 ACS800-04-0060-2 R6 202 282 55 184 55 141 37 65 1440 405 ACS800-04-0070-2 R6 214 326 55 211 55 170 45 71 2900 540 ACS800-04(M)-0080-2 R7 253 404 75 248 75 202 55 71 3450 540 ACS800-04(M)-0100-2 R7 295 432 90 290 90 240 4) 55 71 4050 540 ACS800-04(M)-0120-2 R7 405 588 110 396 110 316 90 72 5300 1220 ACS800-04(M)-0140-2 R8 447 588 132 440 132 340 90 72 6100 1220 ACS800-04(M)-0170-2 R8 528 588 160 516 160 370 110 72 6700 1220 ACS800-04(M)-0210-2 R8 613 840 160 598 160 480 132 72 7600 1220 ACS800-04(M)-0230-2 R8 693 1017 200 679 200 590 2) 160 72 7850 1220 ACS800-04(M)-0260-2 R8 720 1017 200 704 200 635 3) 200 72 8300 1220 ACS800-04(M)-0300-2 R8 Enclosure Degree of Protection: IP00 standard for 04 and 04(M) frame sizes R7, R8 and nxr8i IP20 standard for -04 frame sizes R2 - R6, option for some 04(M) variants Paint color: RAL 90021/PMS 420C Type Height Width Depth Weight kg R2 370 165 193 6) 8 R3 420 173 232 6) 13 R4 490 240 253 6) 24 R5 602 265 276 32 R6 700 300 399 64 R7 1121/1152/1126 7) 427/632/264 7) 473/259/467 7) 100 R8 1564/1596 8) 562/779 8) 568/403 8) 205 12 Drive modules

Ratings and dimensions ACS800-04 ACS800-04 - XXXX - 3 + XXXX Nominal ratings No-overload Light-overload Heavy-duty Nominal Ratings: I cont.max : rated current available continuously without overloadability at 40 C. I max : maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% P hd. Noise Heat Air level dissipation flow Type code Frame I cont. max I max P cont. max I N P N I hd P hd size A A kw A kw A kw dba W m 3 /h UN = 400 V (Range 380-415 V). The power ratings are valid at nominal voltage 400 V. 5.1 6.5 1.5 4.7 1.5 3.4 1.1 62 100 35 ACS800-04-0003-3 R2 6.5 8.2 2.2 5.9 2.2 4.3 1.5 62 120 35 ACS800-04-0004-3 R2 8.5 10.8 3 7.7 3 5.7 2.2 62 140 35 ACS800-04-0005-3 R2 10.9 13.8 4 10.2 4 7.5 3 62 160 35 ACS800-04-0006-3 R2 13.9 17.6 5.5 12.7 5.5 9.3 4 62 200 35 ACS800-04-0009-3 R2 19 24 7.5 18 7.5 14 5.5 62 250 69 ACS800-04-0011-3 R3 25 32 11 24 11 19 7.5 62 340 69 ACS800-04-0016-3 R3 34 46 15 31 15 23 11 62 440 69 ACS800-04-0020-3 R3 40 46 22 39 18.5 28 15 62 520 69 ACS800-04-0023-3 R3 44 62 22 41 18.5 32 15 62 530 103 ACS800-04-0025-3 R4 55 72 30 50 22 37 18.5 62 610 103 ACS800-04-0030-3 R4 59 72 30 57 30 41 22 62 660 103 ACS800-04-0035-3 R4 72 86 37 69 30 49 22 65 810 250 ACS800-04-0040-3 R5 86 112 45 80 37 60 30 65 990 250 ACS800-04-0050-3 R5 103 138 55 100 55 69 37 65 1190 250 ACS800-04-0060-3 R5 141 164 75 132 55 97 45 65 1440 405 ACS800-04-0070-3 R6 166 202 90 155 75 115 55 65 1940 405 ACS800-04-0100-3 R6 202 282 110 184 90 141 75 65 2310 405 ACS800-04-0120-3 R6 225 282 110 220 110 162 4) 90 65 2570 405 ACS800-04-0130-3 R6 206 326 110 202 110 163 90 71 3000 540 ACS800-04(M)-0140-3 R7 248 404 132 243 132 202 110 71 3650 540 ACS800-04(M)-0170-3 R7 289 432 160 284 160 240 1) 132 71 4300 540 ACS800-04(M)-0210-3 R7 445 588 200 440 200 340 160 72 6600 1220 ACS800-04(M)-0260-3 R8 521 588 250 516 250 370 200 72 7150 1220 ACS800-04(M)-0320-3 R8 602 840 315 590 315 477 250 72 8100 1220 ACS800-04(M)-0400-3 R8 693 1017 355 679 355 590 2) 315 72 8650 1220 ACS800-04(M)-0440-3 R8 720 1017 400 704 400 635 3) 355 72 9100 1220 ACS800-04(M)-0490-3 R8 879 1315 500 844 500 657 400 73 13000 3120 ACS800-04-0610-3 1xD4 + 2xR8i 1111 1521 630 1067 630 831 450 74 17200 3840 ACS800-04-0770-3 2xD4 + 2xR8i 1255 1877 710 1205 710 939 500 74 18500 3840 ACS800-04-0870-3 2xD4 + 2xR8i 1452 1988 800 1394 800 1086 630 74 23900 3840 ACS800-04-1030-3 2xD4 + 2xR8i 1770 2648 1000 1699 1000 1324 710 75 27500 5040 ACS800-04-1230-3 2xD4 + 3xR8i 2156 2951 1200 2070 1200 1613 900 76 35400 5760 ACS800-04-1540-3 3xD4 + 3xR8i 2663 3984 1450 2556 1450 1992 1120 76 42700 6960 ACS800-04-1850-3 3xD4 + 4xR8i Enclosure Degree of Protection: IP00 standard for 04 and 04(M) frame sizes R7, R8 and nxr8i IP20 standard for -04 frame sizes R2 - R6, option for some 04(M) variants Paint color: RAL 90021/PMS 420C Type Height Width Depth Weight kg R2 370 165 193 6) 8 R3 420 173 232 6) 13 R4 490 240 253 6) 24 R5 602 265 276 32 R6 700 300 399 64 R7 1121/1152/1126 7) 427/632/264 7) 473/259/467 7) 100 R8 1564/1596 8) 562/779 8) 568/403 8) 205 D4 1480 234 400 10) 180 2xD4 1480 234 9) 400 10) 360 3xD4 1480 234 9) 400 10) 540 2xR8i 1397 245 9) 596 300 3xR8i 1397 245 9) 596 450 4xR8i 1397 245 9) 596 600 Typical Ratings: No-overload P cont.max : typical motor power in no-overload. Light-overload I N : continuous current allowing 110% I N for 1min / 5 min at 40 C. P N : typical motor power in light-overload. Heavy-duty I hd : continuous current allowing 150% I hd for 1min / 5 min at 40 C. P hd : typical motor power in heavy-duty. The current ratings are the same regardless of the supply voltage within one voltage range. The ratings apply at 40 C ambient temperature. At higher temperatures (up to 50 C) the derating is 1% / 1 C. Notes: 1) 50% overload available if T amb < 25 C. If T amb = 40 C, max overload is 37%. 2) 50% overload available if T amb < 30 C. If T amb = 40 C, max overload is 40%. 3) 50% overload available if T amb < 20 C. If T amb = 40 C, max overload is 30%. 4) 50% overload available if T amb < 35 C. If T amb = 40 C, max overload is 45%. 5) Higher value available if output frequency is above 41 Hz. 6) Please note that of control panel or I/O extension or counication options increases the depth. 7) Bookshelf (in ACS800-04M +H354) / fl at (+H360) / bottom exit (+H352) version. 8) Bookshelf (in ACS800-04M +H354) / fl at (+H360) mounting. 9) Single module only. 10) Cable connections need additional space (about 200 ) behind the module. Drive modules 13

Ratings and dimensions ACS800-04 ACS800-04 - XXXX - 5 + XXXX Nominal ratings No-overload Light-overload Heavy-duty Enclosure Degree of Protection: IP00 standard for 04 and 04(M) frame sizes R7, R8 and nxr8i IP20 standard for -04 frame sizes R2 - R6, option for some 04(M) variants Paint color: RAL 90021/PMS 420C Noise Heat Air level dissipation flow Type code Frame I cont. max I max P cont. max I N P N I hd P hd size A A kw A kw A kw dba W m 3 /h UN = 500 V (Range 380-500 V). The power ratings are valid at nominal voltage 500 V. 4.9 6.5 2.2 4.5 2.2 3.4 1.5 62 120 35 ACS800-04-0004-5 R2 6.2 8.2 3 5.6 3 4.2 2.2 62 140 35 ACS800-04-0005-5 R2 8.1 10.8 4 7.7 4 5.6 3 62 160 35 ACS800-04-0006-5 R2 10.5 13.8 5.5 10 5.5 7.5 4 62 200 35 ACS800-04-0009-5 R2 13.2 17.6 7.5 12 7.5 9.2 5.5 62 250 35 ACS800-04-0011-5 R2 19 24 11 18 11 13 7.5 62 340 69 ACS800-04-0016-5 R3 25 32 15 23 15 18 11 62 440 69 ACS800-04-0020-5 R3 34 46 18.5 31 18.5 23 15 62 530 69 ACS800-04-0025-5 R3 38 46 22 37 22.0 27 19 62 590 69 ACS800-04-0028-5 R3 42 62 22 39 22 32 18.5 62 610 103 ACS800-04-0030-5 R4 48 72 30 44 30 36 22 62 810 103 ACS800-04-0040-5 R4 56 72 37 54 37 39 22 62 950 103 ACS800-04-0045-5 R4 65 86 37 61 37 50 30 65 990 250 ACS800-04-0050-5 R5 79 112 45 75 45 60 37 65 1190 250 ACS800-04-0060-5 R5 96 138 55 88 55 69 45 65 1440 250 ACS800-04-0070-5 R5 124 164 75 115 75 88 55 65 1940 405 ACS800-04-0100-5 R6 157 202 90 145 90 113 75 65 2310 405 ACS800-04-0120-5 R6 180 282 110 163 110 141 90 65 2810 405 ACS800-04-0140-5 R6 209 282 132 204 132 162 2) 110 65 3260 405 ACS800-04-0150-5 R6 196 326 132 192 132 162 110 71 3000 540 ACS800-04(M)-0170-5 R7 245 384 160 240 160 192 132 71 3800 540 ACS800-04(M)-0210-5 R7 289 432 200 284 200 224 160 71 4500 540 ACS800-04(M)-0260-5 R7 440 588 250 435 250 340 200 72 6850 1220 ACS800-04(M)-0320-5 R8 515 588 315 510 315 370 250 72 7800 1220 ACS800-04(M)-0400-5 R8 550 840 355 545 355 490 315 72 7600 1220 ACS800-04(M)-0440-5 R8 602 840 400 590 400 515 2) 355 72 8100 1220 ACS800-04(M)-0490-5 R8 684 1017 450 670 450 590 2) 400 72 9100 1220 ACS800-04(M)-0550-5 R8 718 1017 500 704 500 632 3) 450 72 9700 1220 ACS800-04(M)-0610-5 R8 883 1321 630 848 630 660 500 73 14000 3120 ACS800-04-0760-5 1xD4 + 2xR8i 1050 1524 710 1008 710 785 560 74 17200 3840 ACS800-04-0910-5 2xD4 + 2xR8i 1258 1882 900 1208 900 941 630 74 19900 3840 ACS800-04-1090-5 2xD4 + 2xR8i 1372 1991 1000 1317 1000 1026 710 74 23800 3840 ACS800-04-1210-5 2xD4 + 2xR8i 1775 2655 1250 1704 1200 1328 900 75 29400 5040 ACS800-04-1540-5 2xD4 + 3xR8i 2037 2956 1450 1956 1400 1524 1120 76 35000 5760 ACS800-04-1820-5 3xD4 + 3xR8i 2670 3901 1900 2563 1850 1997 1400 76 45400 6960 ACS800-04-2310-5 3xD4 + 4xR8i Type Height Width Depth Weight kg R2 370 165 193 6) 8 R3 420 173 232 6) 13 R4 490 240 253 6) 24 R5 602 265 276 32 R6 700 300 399 64 R7 1121/1152/1126 7) 427/632/264 7) 473/259/467 7) 100 R8 1564/1596 8) 562/779 8) 568/403 8) 205 D4 1480 234 400 10) 180 2xD4 1480 234 9) 400 10) 360 3xD4 1480 234 9) 400 10) 540 2xR8i 1397 245 9) 596 300 3xR8i 1397 245 9) 596 450 4xR8i 1397 245 9) 596 600 14 Drive modules

Ratings and dimensions ACS800-04 ACS800-04 - XXXX - 7 + XXXX Nominal ratings No-overload Light-overload Heavy-duty Noise Heat Air level dissipation flow Type code Frame I cont. max I max P cont. max I N P N I hd P hd size A A kw A kw A kw dba W m 3 /h UN = 690 V (Range 525-690 V). The power ratings are valid at nominal voltage 690 V. 13 14 11 11.5 7.5 8.5 5.5 62 300 103 ACS800-04-0011-7 R4 17 19 15 15 11 11 7.5 62 340 103 ACS800-04-0016-7 R4 22 28 18.5 20 15 15 11 62 440 103 ACS800-04-0020-7 R4 25 38 22 23 18.5 19 15 62 530 103 ACS800-04-0025-7 R4 33 44 30 30 22 22 18.5 62 610 103 ACS800-04-0030-7 R4 36 54 30 34 30 27 22 62 690 103 ACS800-04-0040-7 R4 51 68 45 46 37 34 30 65 840 250 ACS800-04-0050-7 R5 57 84 55 52 45 42 37 65 1010 250 ACS800-04-0060-7 R5 79 104 75 73 55 54 45 65 1220 405 ACS800-04-0070-7 R6 93 124 90 86 75 62 55 65 1650 405 ACS800-04-0100-7 R6 113 172 110 108 90 86 75 65 1960 405 ACS800-04-0120-7 R6 134 190 132 125 110 95 90 71 2800 540 ACS800-04(M)-0140-7 R7 166 263 160 155 132 131 110 71 3550 540 ACS800-04(M)-0170-7 R7 166/203 5) 294 160 165/195 5) 160 147 132 71 4250 540 ACS800-04(M)-0210-7 R7 175/230 5) 326 160/200 5) 175/212 5) 160/200 5) 163 160 71 4800 540 ACS800-04(M)-0260-7 R7 315 433 315 290 250 216 200 72 6150 1220 ACS800-04(M)-0320-7 R8 353 548 355 344 315 274 250 72 6650 1220 ACS800-04(M)-0400-7 R8 396 656 400 387 355 328 315 72 7400 1220 ACS800-04(M)-0440-7 R8 445 775 450 426 400 387 355 72 8450 1220 ACS800-04(M)-0490-7 R8 488 853 500 482 450 426 400 72 8300 1220 ACS800-04(M)-0550-7 R8 560 964 560 537 500 482 450 72 9750 1220 ACS800-04(M)-0610-7 R8 628 939 630 603 630 470 500 73 13900 3120 ACS800-04-0750-7 1xD4 + 2xR8i 729 1091 710 700 710 545 560 73 17100 3120 ACS800-04-0870-7 1xD4 + 2xR8i 885 1324 800 850 800 662 630 73 18400 3120 ACS800-04-1060-7 1xD4 + 2xR8i 953 1426 900 915 900 713 710 74 20800 3840 ACS800-04-1160-7 2xD4 + 2xR8i 1258 1882 1200 1208 1200 941 900 75 27000 5040 ACS800-04-1500-7 2xD4 + 3xR8i 1414 2115 1400 1357 1400 1058 1000 75 32500 5040 ACS800-04-1740-7 2xD4 + 3xR8i 1774 2654 1700 1703 1700 1327 1250 76 40100 6240 ACS800-04-2120-7 2xD4 + 4xR8i 1866 2792 1900 1791 1800 1396 1400 76 43300 6960 ACS800-04-2320-7 3xD4 + 4xR8i Enclosure Degree of Protection: IP00 standard for 04 and 04(M) frame sizes R7, R8 and nxr8i IP20 standard for -04 frame sizes R2 - R6, option for some 04(M) variants Paint color: RAL 90021/PMS 420C Type Height Width Depth Weight kg R2 370 165 193 6) 8 R3 420 173 232 6) 13 R4 490 240 253 6) 24 R5 602 265 276 32 R6 700 300 399 64 R7 1121/1152/1126 7) 427/632/264 7) 473/259/467 7) 100 R8 1564/1596 8) 562/779 8) 568/403 8) 205 D4 1480 234 400 10) 180 2xD4 1480 234 9) 400 10) 360 3xD4 1480 234 9) 400 10) 540 2xR8i 1397 245 9) 596 300 3xR8i 1397 245 9) 596 450 4xR8i 1397 245 9) 596 600 Nominal Ratings: I cont.max : rated current available continuously without overloadability at 40 C. I max : maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% P hd. Typical Ratings: No-overload P cont.max : typical motor power in no-overload. Light-overload I N : continuous current allowing 110% I N for 1min / 5 min at 40 C. P N : typical motor power in light-overload. Heavy-duty I hd : continuous current allowing 150% I hd for 1min / 5 min at 40 C. P hd : typical motor power in heavy-duty. The current ratings are the same regardless of the supply voltage within one voltage range. The ratings apply at 40 C ambient temperature. At higher temperatures (up to 50 C) the derating is 1% / 1 C. Notes: 1) 50% overload available if T amb < 25 C. If T amb = 40 C, max overload is 37%. 2) 50% overload available if T amb < 30 C. If T amb = 40 C, max overload is 40%. 3) 50% overload available if T amb < 20 C. If T amb = 40 C, max overload is 30%. 4) 50% overload available if T amb < 35 C. If T amb = 40 C, max overload is 45%. 5) Higher value available if output frequency is above 41 Hz. 6) Please note that of control panel or I/O extension or counication options increases the depth. 7) Bookshelf (in ACS800-04M +H354) / fl at (+H360) / bottom exit (+H352) version. 8) Bookshelf (in ACS800-04M +H354) / fl at (+H360) mounting. 9) Single module only. 10) Cable connections need additional space (about 200 ) behind the module. Drive modules 15

Multidrive modules The ACS800 multidrive module product series includes rectifier- and DC-supplied inverter modules and accessories especially designed for integrators, OEMs and panel builders. The ACS800 multidrive principle based on a coon DC bus arrangement enables single power entry and coon braking resources for several drives. Coon braking includes the possibility for regenerative braking and motor-to-motor braking depending on the motor loads in the line-up. Special design for system integrators The design of these modules is based on much smaller inverter modules. The modules have a plug-in connector, meaning fast and easy assembling. The modules are also equipped with wheels, so they can easily be pulled out of the cabinet and pushed back for maintenance purposes. This concept also allows pre-installation of the power cables in the empty cabinet. Inverter and diode modules can be freely connected parallel for higher output current. This means a limited number of different module sizes and fewer spare parts. The modularity, compact size and simplicity of the modules means a lot of savings for cabinet builders in terms of minimizing the number of cabinets and the widths. Besides the compact design, the new ACS800 DCsupplied inverter and rectifier units include an extensive selection of options. Product range Inverter modules Inverter modules are available in 7 different frame sizes. Frame sizes R2i - R7i start from 1.1 kw up to 110 kw, and all the powers from 90 to 2000 kw are different configurations of R8i units, single or in parallel. The voltage range covers 380 V, 500 V and 690 V. Supply modules Supply modules are available as diode-, thyristor- or IGBT- based solutions. In the diode supply units (DSU) only four different types of unit, either in single or parallel, cover the power range of 145 to 4200 kw in 380-690 V. The basic features of the diode rectifier unit include automatic adaptation to 6 or 12-pulse operation and automatic control to charge the inverter capacitor banks during start-up. The mechanical dimensions are the same in each module, making engineering and assembling very easy. The thyristor supply unit (TSU) is d in regenerative drive systems. It contains two 6-pulse thyristor bridges in antiparallel connections. 12-pulse units can also be configured. The power range is from 470 kw up to 3150 kw in 380-690 V. An IGBT Supply unit (ISU) is d in fully regenerative drive systems. In power control it gives the same firm and gentle performance as DTC gives in motor control. The power module is hardware compatible with the inverter module. In passive mode the converter operates as the rectifier. In the active mode the IGBTs are controlled to keep the DC voltage constant and the line current sinusoidal. Harmonic content remains extremely low due to DTC control and LCL filtering. The power range is from 60 kw up to 1975 kw in 380-690 V. Modules are single or parallel connected. Braking choppers and resistors In resistor braking whenever the voltage in the intermediate circuit of a frequency converter exceeds a certain limit, a braking chopper connects the circuit to a braking resistor. Standard resistors are also available, but non-standard resistors can be d, however they must be checked case-by-case. 16 Drive modules

The power range is from 230 kw up to 2400 kw in 380-690 V. Main standard hardware features: Frame sizes R2i - R5i control board inside of the module Frame sizes R7i - n*r8i control board outside of the module Extensive, prograable I/O Three I/O and fieldbus extension slots Inputs galvanically isolated Optimised design for cabinet assembly Modular design allowing wide variety of variants Compact design Long lifetime cooling fan and capacitors Du/dt filters as standard in parallel connected R8i and in single or parallel connected 690 V inverter units Mounting on the cabinet wall frame size R2i - R7i and on the cabinet floor for R8i and the D3/D4 supply module Wheels and plug connectors in the R8i inverter and D3/D4 supply module Coated boards LCL-filter units in ISUs Inverter frame sizes R8i - n*r8i: Prevention of unexpected start-up DC fs, f bases or DC-f switch + charging circuitry du/dt filters as options in 400 / 500 V Mechanical accessories in Rittal TS8 cabinets IP21 - IP54 cabinet door / roof mechanical kits Accessories kits Coon mode filters for motor protection DSU frame sizes D3 - n*d4: Contactor (inside the module) RFI filter up to 1000 A Front end AC-fs Air circuit breaker Mechanical accessories in Rittal TS8 cabinets IP21 - IP54 cabinet door / roof mechanical kits Accessories kits Main optional hardware features: Inverter frame sizes R2i - R7i: Prevention of unexpected start-up DC fs, f bases or DC-f switch Mechanics for tilted position assembly in R2i - R5i frame size Assembly plates for R7i units du/dt filters coon mode filter for motor protection on-off control for cooling fan with internal charging option Mechanical accessories in Rittal TS8 cabinets (only for R7) IP21 - IP54 cabinet door / roof mechanical kits Accessories kits Drive modules 17

Ratings and dimensions ACS800-x04, drive module, U N =400 V ACS800 - X04 - XXXX - 3 + XXXX Nominal ratings No-overload Light-overload Heavy-duty Heat dissipation Module type Frame Icont. max Imax Pcont. max IN PN Ihd Phd size A A kw A kw A kw kw U N = 400 V (Range 380-415 V). The power ratings are valid at nominal voltage 400 V. 5.1 6.5 1.5 4.7 1.5 3.4 1.1 0.1 ACS800-104-0003-3 R2i 6.5 8.2 2.2 5.9 2.2 4.3 1.5 0.1 ACS800-104-0004-3 R2i 8.5 10.8 3 7.7 3 5.7 2.2 0.1 ACS800-104-0005-3 R2i 10.9 13.8 4 10.2 4 7.5 3 0.1 ACS800-104-0006-3 R2i 13.9 17.6 5.5 12.7 5.5 9.3 4 0.2 ACS800-104-0009-3 R2i 19 24 7.5 18 7.5 14 5.5 0.3 ACS800-104-0011-3 R3i 25 32 11 24 11 19 7.5 0.3 ACS800-104-0016-3 R3i 34 46 15 31 15 23 11 0.4 ACS800-104-0020-3 R3i 44 62 22 41 18.5 32 15 0.5 ACS800-104-0025-3 R4i 55 72 30 50 22 37 18.5 0.6 ACS800-104-0030-3 R4i 72 86 37 69 30 49 22 0.8 ACS800-104-0040-3 R5i 86 112 45 80 37 60 30 1 ACS800-104-0050-3 R5i 103 138 55 94 45 69 37 1.2 ACS800-104-0060-3 R5i 147 220 75 141 75 110 55 1.4 ACS800-104-0105-3 R7i 178 252 90 171 90 133 55 1.7 ACS800-104-0125-3 R7i 208 312 110 200 110 156 75 1.9 ACS800-104-0145-3 R7i 250 374 132 240 132 187 90 2.1 ACS800-104-0175-3 R7i 292 400 160 280 160 218 110 2.7 ACS800-104-0210-3 R8i 370 506 200 355 200 277 132 3.7 ACS800-104-0260-3 R8i 469 642 250 450 250 351 200 4.9 ACS800-104-0320-3 R8i 656 773 315 542 315 423 220 6.1 ACS800-104-0390-3 R8i 741 1014 400 711 400 554 315 8 ACS800-104-0510-3 R8i 1111 1521 630 1067 630 831 450 12 ACS800-104-0770-3 2xR8i 1452 1988 800 1394 800 1086 630 15 ACS800-104-1030-3 2xR8i 2156 2951 1200 2070 1200 1613 900 23 ACS800-104-1540-3 3xR8i 2845 3894 1600 2731 1600 2128 1120 30 ACS800-104-2050-3 4xR8i Dimensions: Frame size Height Width Depth Weight Noise level Air flow kg db(a) m 3 /h R2i 401 165 193 3) 9 62 35 R3i 466 173 232 3) 12 62 69 R4i 525 240 252 3) 15 62 103 R5i 673 265 276 3) 23 65 168 R7i 1) 963 170 404 37 64 480 R8i 1397 235 596 150 72 1280 2xR8i 1397 245 2) 596 300 74 2560 3xR8i 1397 245 2) 596 450 76 3840 4xR8i 1397 245 2) 596 600 76 5120 1 ) Dimensions do not include cooling fan. 2 ) Single module only. 3 ) The depth is without control panels and options. Type Height Width Depth RDCU control unit *) 282 126 41 *) Delivered with every unit. Nominal Ratings: I cont.max : rated current available continuously without overloadability at 40 C. I max : maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Typical Ratings: No-overload P cont.max : typical motor power in no-overload. Light-overload I N : continuous current allowing 110% I N for 1 min / 5 min at 40 C. P N : typical motor power in light-overload. Heavy-duty I hd : continuous current allowing 150% I hd for 1 min / 5 min at 40 C. P hd : typical motor power in heavy-duty. The current ratings are the same regardless of the supply voltage within one voltage range. The ratings apply in 40 C ambient temperature. In lower temperatures the ratings are higher (except I max ). The rated current of the ACS800 must be higher than or equal to the rated motor current to achieve the rated motor power given in the table. 18 Drive modules

Ratings and dimensions ACS800-x04, supply module, U N =400 V ACS800 - X04 - XXXX - 3 + XXXX 7 Icont. max Nominal ratings Icont. max Imax SN A (AC) A (DC) A (DC) kva No-overload Pcont. max A (DC) Light-overload IN kw (DC) PN A (DC) Heavy-duty Ihd kw (DC) Phd A (DC) Heat dissipation kw Name / module type Frame size U N = 400 V (Range 380-415 V). The power ratings are valid at nominal voltage 400 V. IGBT supply module (ISU) 182 221 330 131 130 212 124 165 97 3.8 ACS800-204-0135-3 R7i + ISU_LCL_5R7 224 272 406 161 159 261 153 203 119 4.2 ACS800-204-0155-3 R7i + ISU_LCL_5R7 284 344 471 204 202 331 194 258 151 5.9 ACS800-204-0200-3 R8i + ALCL-12-5 378 458 627 272 269 440 258 343 201 8 ACS800-204-0260-3 R8i + ALCL-13-5 473 573 784 340 336 550 323 429 252 10.3 ACS800-204-0330-3 R8i + ALCL-14-5 630 764 1046 453 448 733 430 571 335 14.6 ACS800-204-0440-3 R8i + ALCL-15-5 945 1146 1568 679 672 1100 646 857 503 20.5 ACS800-204-0660-3 2xR8i + ALCL-24-5 1235 1497 2049 888 879 1437 844 1120 657 28.3 ACS800-204-0860-3 2xR8i + ALCL-25-5 1833 2223 3042 1318 1304 2134 1252 1662 976 41.7 ACS800-204-1270-3 3xR8i + 2xALCL-24-5 2419 2933 4015 1739 1722 2816 1653 2194 1288 54.8 ACS800-204-1680-3 4xR8i + 2xALCL-25-5 6-pulse diode (DSU) 286 350 462 198 183 335 175 280 147 1.5 ACS800-304-0320-7 D3 408 500 700 283 262 480 251 400 210 2.4 ACS800-304-0450-7 D3 571 700 924 396 367 670 351 560 293 3.8 ACS800-704-0640-7 D4 816 1000 1400 566 524 960 503 800 419 5 ACS800-704-0910-7 D4 1143 1400 1848 792 733 1340 702 1120 587 7.6 ACS800-704-1370-7 2xD4 1518 1860 2604 1052 974 1790 938 1490 780 10 ACS800-704-1810-7 2xD4 2278 2790 3906 1578 1461 2685 1406 2230 1168 15 ACS800-704-2720-7 3xD4 3037 3720 5208 2104 1949 3580 1875 2980 1561 20 ACS800-704-3630-7 4xD4 3796 4650 6510 2630 2436 4475 2344 3720 1949 25 ACS800-704-4540-7 5xD4 6-pulse regenerative (TSU) 981 1202 1947 680 639 1136 604 880 468 6.3 ACS800-404-0680-3 2xB4 + choke 1617 1980 3208 1120 1053 1872 995 1450 721 10.2 ACS800-404-1120-3 2xB4 + choke 2449 3000 4860 1697 1595 2838 1509 2244 1193 16.5 ACS800-404-1700-3 2xB5 + choke 2858 3500 5670 1980 1861 3311 1760 2618 1392 20.8 ACS800-404-2100-3 2xB5 + choke 12-pulse diode (DSU) 571 700 924 396 367 670 351 560 293 3.8 ACS800-704-0640-7 D4 816 1000 1400 566 524 960 503 800 419 5 ACS800-704-0910-7 D4 1143 1400 1848 792 733 1340 702 1120 587 7.6 ACS800-704-1370-7 2xD4 1518 1860 2604 1052 974 1790 938 1490 780 10 ACS800-704-1810-7 2xD4 2278 2790 3906 1578 1461 2685 1406 2230 1168 15 ACS800-704-2720-7 3xD4 3037 3720 5208 2104 1949 3580 1875 2980 1561 20 ACS800-704-3630-7 4xD4 3796 4650 6510 2630 2436 4475 2344 3720 1949 25 ACS800-704-4540-7 5xD4 Nominal Ratings: I cont.max : rated current available continuously without overloadability at 40 C. I max : maximum output current. Typical Ratings: No-overload P cont.max : power in no-overload. Light-overload I N : continuous current allowing 110% I N for 1 min / 5 min at 40 C. P N : power in light-overload. Heavy-duty I hd : continuous current allowing 150% I hd for 1 min / 5 min at 40 C. P hd : power in heavy-duty. The current ratings are the same regardless of the supply voltage within one voltage range. The ratings apply in 40 C ambient temperature. In lower temperatures the ratings are higher (except I max ). Dimensions: Frame size Height Width Depth Weight kg Noise level db(a) Air flow m 3 /h IGBT supply unit (ISU) R7i 1) 963 170 404 37 65 4) 480 R8i 1397 245 596 150 72 4) 1280 2xR8i 1397 245 2) 596 300 74 4) 2560 3xR8i 1397 245 2) 596 450 76 4) 7680 4xR8i 1397 245 2) 596 600 76 4) 5120 LCL-filter for IGBT supply unit (ISU) ISU_LCL_XR7 810 304 292 72-480 ALCL-1X-X 1397 240 499 180-400 ALCL-2X-X 1397 240 573 305-1280 6-pulse diode (DSU) D3 1480 234 400 3) 130 65 720 D4 1480 234 400 3) 180 65 720 2XD4 1480 234 2) 400 3) 360 67 1440 3XD4 1480 234 2) 400 3) 540 68 2160 4XD4 1480 234 2) 400 3) 720 69 2880 5XD4 1480 234 2) 400 3) 900 70 3600 Frame size Height Width Depth Weight kg Noise level db(a) Air flow m 3 /h 6-pulse regenerative (TSU) 2XB4 1808 340 2) 430 110 2) 72 5) 2000 2XB5 1808 420 2) 430 150 2) 75 5) 3400 DC chokes for 6-pulse regenerative (TSU) choke B4 771 348 449 110-600 choke B5 991 348 449 150-700 12-pulse diode (DSU) D4 1480 234 400 3) 180 65 720 2XD4 1480 234 2) 400 3) 360 67 1440 3XD4 1480 234 2) 400 3) 540 68 2160 4XD4 1480 234 2) 400 3) 720 69 2880 5XD4 1480 234 2) 400 3) 900 70 3600 1 ) Dimensions do not include cooling fan. 2 ) Single module only. 3 ) Cable connections need additional space (about 200 ) behind the module. 4 ) Supply modules + fi lters. 5 ) Supply modules + choke. Drive modules 19

Ratings and dimensions ACS800-x04, drive module, U N =500 V ACS800 - X04 - XXXX - 5 + XXXX Nominal ratings No-overload Light-overload Heavy-duty Heat dissipation Module Frame Icont. max Imax Pcont. max IN PN Ihd Phd type size A A kw A kw A kw kw U N = 500 V (Range 380-500 V). The power ratings are valid at nominal voltage 500 V. 4.9 7 2.2 4.5 2.2 3.4 1.5 0.1 ACS800-104-0004-5 R2i 6.2 8 3 5.6 3 4.2 2.2 0.1 ACS800-104-0005-5 R2i 8.1 11 4 7.7 4 5.6 3 0.2 ACS800-104-0006-5 R2i 11 14 5.5 10 5.5 7.5 4 0.2 ACS800-104-0009-5 R2i 13 18 7.5 12 7.5 9.2 5.5 0.3 ACS800-104-0011-5 R2i 19 24 11 18 11 13 7.5 0.3 ACS800-104-0016-5 R3i 25 32 15 23 15 18 11 0.4 ACS800-104-0020-5 R3i 34 46 18.5 31 18.5 23 15 0.5 ACS800-104-0025-5 R3i 42 62 22 39 22 32 18.5 0.6 ACS800-104-0030-5 R4i 48 72 30 44 30 36 22 0.8 ACS800-104-0040-5 R4i 65 86 37 61 37 50 30 1 ACS800-104-0050-5 R5i 79 112 45 75 45 60 37 1.2 ACS800-104-0060-5 R5i 96 138 55 88 55 69 45 1.4 ACS800-104-0070-5 R5i 115 172 75 110 55 86 55 1.1 ACS800-104-0105-5 R7i 135 202 90 130 90 101 55 1.3 ACS800-104-0125-5 R7i 166 248 110 159 110 124 75 1.7 ACS800-104-0145-5 R7i 208 312 132 200 132 156 90 2 ACS800-104-0175-5 R7i 250 374 160 240 160 187 110 2.2 ACS800-104-0215-5 R7i 315 457 200 302 200 236 132 3.2 ACS800-104-0260-5 R8i 365 530 250 350 250 273 160 4 ACS800-104-0320-5 R8i 455 660 315 437 315 340 200 5.4 ACS800-104-0400-5 R8i 525 762 355 504 355 393 250 5.9 ACS800-104-0460-5 R8i 700 1016 500 672 500 524 355 7.8 ACS800-104-0610-5 R8i 1050 1524 710 1008 710 785 560 12 ACS800-104-0910-5 2xR8i 1372 1991 1000 1317 1000 1026 710 15 ACS800-104-1210-5 2xR8i 2037 2956 1450 1956 1450 1524 1120 22 ACS800-104-1820-5 3xR8i 2688 3901 2000 2580 1850 2011 1400 29 ACS800-104-2430-5 4xR8i Dimensions: Frame size Height Width Depth Weight Noise level Air flow kg db(a) m 3 /h R2i 401 165 193 3) 9 62 35 R3i 466 173 232 3) 12 62 69 R4i 525 240 252 3) 15 62 103 R5i 673 265 276 3) 23 65 168 R7i 1) 963 170 404 37 64 480 R8i 1397 235 596 150 72 1280 2xR8i 1397 245 2) 596 300 74 2560 3xR8i 1397 245 2) 596 450 76 3840 4xR8i 1397 245 2) 596 600 76 5120 1 ) Dimensions do not include cooling fan. 2 ) Single module only. 3 ) The depth is without control panels and options. Type Height Width Depth RDCU control unit *) 282 126 41 *) Delivered with every unit. Nominal Ratings: I cont.max : rated current available continuously without overloadability at 40 C. I max : maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Typical Ratings: No-overload P cont.max : typical motor power in no-overload. Light-overload I N : continuous current allowing 110% I N for 1 min / 5 min at 40 C. P N : typical motor power in light-overload. Heavy-duty I hd : continuous current allowing 150% I hd for 1 min / 5 min at 40 C. P hd : typical motor power in heavy-duty. The current ratings are the same regardless of the supply voltage within one voltage range. The ratings apply in 40 C ambient temperature. In lower temperatures the ratings are higher (except I max ). The rated current of the ACS800 must be higher than or equal to the rated motor current to achieve the rated motor power given in the table. 20 Drive modules

Ratings and dimensions ACS800-x04, supply module, U N =500 V ACS800 - X04 - XXXX - 5 + XXXX 7 Nominal ratings No-overload Light-overload Heavy-duty Heat dissipation Name / Frame Icont. max Icont. max Imax SN Pcont. max IN PN Ihd Phd module type size A (AC) A (DC) A (DC) kva A (DC) kw (DC) A (DC) kw (DC) A (DC) kw UN = 500 V (Range 380-500 V). The power ratings are valid at nominal voltage 500 V. IGBT supply module (ISU) 180 218 327 156 154 210 148 163 115 4 ACS800-204-0165-5 R7i + ISU_LCL_5R7 220 267 399 191 189 256 181 200 141 4.4 ACS800-204-0195-5 R7i + ISU_LCL_5R7 270 327 475 234 231 314 222 245 173 6.2 ACS800-204-0230-5 R8i + ALCL-12-5 360 436 633 312 309 419 296 327 231 8.4 ACS800-204-0310-5 R8i + ALCL-13-5 450 546 792 390 386 524 370 408 289 10.6 ACS800-204-0390-5 R8i + ALCL-14-5 600 727 1056 520 514 698 494 544 385 14.9 ACS800-204-0520-5 R8i + ALCL-15-5 900 1091 1584 779 772 1048 741 816 577 21.2 ACS800-204-0780-5 2xR8i + ALCL-24-5 1176 1426 2069 1018 1008 1369 968 1067 754 28.9 ACS800-204-1020-5 2xR8i + ALCL-25-5 1746 2117 3072 1512 1497 2032 1437 1584 1120 42.7 ACS800-204-1510-5 3xR8i + 2xALCL-24-5 2304 2794 4054 1995 1975 2682 1896 2090 1478 56.1 ACS800-204-2000-5 4xR8i + 2xALCL-25-5 6-pulse diode (DSU) 286 350 462 247 229 335 219 280 183 1.5 ACS800-304-0320-7 D3 408 500 700 353 327 480 314 400 262 2.4 ACS800-304-0450-7 D3 571 700 924 495 458 670 439 560 367 3.8 ACS800-704-0640-7 D4 816 1000 1400 707 655 960 629 800 524 5 ACS800-704-0910-7 D4 1143 1400 1848 990 917 1340 877 1120 733 7.6 ACS800-704-1370-7 2xD4 1518 1860 2604 1315 1218 1790 1172 1490 976 10 ACS800-704-1810-7 2xD4 2278 2790 3906 1972 1827 2685 1758 2230 1460 15 ACS800-704-2720-7 3xD4 3037 3720 5208 2630 2436 3580 2344 2980 1951 20 ACS800-704-3630-7 4xD4 3796 4650 6510 3287 3045 4475 2930 3720 2436 25 ACS800-704-4540-7 5xD4 6-pulse regenerative (TSU) 981 1202 1947 850 792 1137 749 881 580 6.3 ACS800-404-0850-5 2xB4 + choke 1617 1980 3208 1400 1304 1872 1233 1450 955 10.2 ACS800-404-1400-5 2xB4 + choke 2449 3000 4860 2120 1976 2838 1869 2240 1478 16.5 ACS800-404-2120-5 2xB5 + choke 2858 3500 5670 2475 2305 3310 2180 2618 1724 20.8 ACS800-404-2600-5 2xB5 + choke 12-pulse diode (DSU) 571 700 924 495 458 670 439 560 367 3.8 ACS800-704-0640-7 D4 816 1000 1400 707 655 960 629 800 524 5 ACS800-704-0910-7 D4 1143 1400 1848 990 917 1340 877 1120 733 7.6 ACS800-704-1370-7 2xD4 1518 1860 2604 1315 1218 1790 1172 1490 976 10 ACS800-704-1810-7 2xD4 2278 2790 3906 1972 1827 2685 1758 2230 1460 15 ACS800-704-2720-7 3xD4 3037 3720 5208 2630 2436 3580 2344 2980 1951 20 ACS800-704-3630-7 4xD4 3796 4650 6510 3287 3045 4475 2930 3720 2436 25 ACS800-704-4540-7 5xD4 Nominal Ratings: I cont.max : rated current available continuously without overloadability at 40 C. I max : maximum output current. Typical Ratings: No-overload P cont.max : power in nooverload. Light-overload I N : continuous current allowing 110% I N for 1 min / 5 min at 40 C. P N : power in light-overload. Heavy-duty I hd : continuous current allowing 150% I hd for 1 min / 5 min at 40 C. P hd : power in heavy-duty. The current ratings are the same regardless of the supply voltage within one voltage range. The ratings apply in 40 C ambient temperature. In lower temperatures the ratings are higher (except I max ). Dimensions: Frame size Height Width Depth Weight kg Noise level db(a) Air flow m 3 /h IGBT supply unit (ISU) R7i 1) 963 170 404 37 65 4) 480 R8i 1397 245 596 150 72 4) 1280 2xR8i 1397 245 2) 596 300 74 4) 2560 3xR8i 1397 245 2) 596 450 76 4) 7680 4xR8i 1397 245 2) 596 600 76 4) 5120 LCL-filter for IGBT supply unit (ISU) ISU_LCL_XR7 810 304 292 72-480 ALCL-1X-X 1397 240 499 180-400 ALCL-2X-X 1397 240 573 305-1280 6-pulse diode (DSU) D3 1480 234 400 3) 130 65 720 D4 1480 234 400 3) 180 65 720 2XD4 1480 234 2) 400 3) 360 67 1440 3XD4 1480 234 2) 400 3) 540 68 2160 4XD4 1480 234 2) 400 3) 720 69 2880 5XD4 1480 234 2) 400 3) 900 70 3600 Frame size Height Width Depth Weight kg Noise level db(a) Air flow m 3 /h 6-pulse regenerative (TSU) 2XB4 1808 340 2) 430 110 2) 72 5) 2000 2XB5 1808 420 2) 430 150 2) 75 5) 3400 DC chokes for 6-pulse regenerative (TSU) choke B4 771 348 449 110-600 choke B5 991 348 449 150-700 12-pulse diode (DSU) D4 1480 234 400 3) 180 65 720 2XD4 1480 234 2) 400 3) 360 67 1440 3XD4 1480 234 2) 400 3) 540 68 2160 4XD4 1480 234 2) 400 3) 720 69 2880 5XD4 1480 234 2) 400 3) 900 70 3600 1 ) Dimensions do not include cooling fan. 2 ) Single module only. 3 ) Cable connections need additional space (about 200 ) behind the module. 4 ) Supply modules + fi lters. 5 ) Supply modules + choke. Drive modules 21

Ratings and dimensions ACS800-x04, drive module, U N =690 V ACS800 - X04 - XXXX - 7 + XXXX Nominal ratings No-overload Light-overload Heavy-duty Heat dissipation Module Frame Icont. max Imax Pcont. max IN PN Ihd Phd type size A A kw A kw A kw kw UN = 690 V (Range 525-690 V). The power ratings are valid at nominal voltage 690 V. 13 14 11 12 7.5 8.5 5.5 0.3 ACS800-104-0011-7 R4i 17 19 15 16 11 11 7.5 0.3 ACS800-104-0016-7 R4i 22 28 18.5 21 15 15 11 0.4 ACS800-104-0020-7 R4i 25 38 22 24 18.5 19 15 0.5 ACS800-104-0025-7 R4i 33 44 30 32 22 22 18.5 0.6 ACS800-104-0030-7 R4i 36 54 30 35 30 27 22 0.7 ACS800-104-0040-7 R4i 51 68 45 49 37 34 30 0.8 ACS800-104-0050-7 R5i 57 84 55 55 45 42 37 1 ACS800-104-0060-7 R5i 69 104 55 66 55 52 45 1.1 ACS800-104-0075-7 R7i 88 132 75 84 75 66 55 1.3 ACS800-104-0105-7 R7i 105 158 90 101 90 79 75 1.6 ACS800-104-0125-7 R7i 132 198 110 127 110 99 90 2 ACS800-104-0145-7 R7i 150 224 132 144 132 112 90 2.3 ACS800-104-0175-7 R7i 170 254 160 163 160 127 110 2 ACS800-104-0215-7 R7i 215 322 200 206 200 161 160 3.6 ACS800-104-0260-7 R8i 289 432 250 277 250 216 200 4.8 ACS800-104-0320-7 R8i 336 503 315 323 315 251 240 6.1 ACS800-104-0400-7 R8i 382 571 355 367 355 286 270 7 ACS800-104-0440-7 R8i 486 727 450 467 450 364 355 7.5 ACS800-104-0580-7 R8i 729 1091 710 700 710 545 500 13 ACS800-104-0870-7 2xR8i 953 1425 900 914 900 713 710 15 ACS800-104-1160-7 2xR8i 1414 2116 1400 1358 1400 1058 1000 22 ACS800-104-1740-7 3xR8i 1866 2792 1900 1792 1800 1396 1400 29 ACS800-104-2320-7 4xR8i Dimensions: Frame size Height Width Depth Weight Noise level Air flow kg db(a) m 3 /h R2i 401 165 193 3) 9 62 35 R3i 466 173 232 3) 12 62 69 R4i 525 240 252 3) 15 62 103 R5i 673 265 276 3) 23 65 168 R7i 1) 963 170 404 37 64 480 R8i 1397 235 596 150 72 1280 2xR8i 1397 245 2) 596 300 74 2560 3xR8i 1397 245 2) 596 450 76 3840 4xR8i 1397 245 2) 596 600 76 5120 1 ) Dimensions do not include cooling fan. 2 ) Single module only. 3 ) The depth is without control panels and options. Type Height Width Depth RDCU control unit *) 282 126 41 *) Delivered with every unit. Nominal Ratings: I cont.max : rated current available continuously without overloadability at 40 C. I max : maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Typical Ratings: No-overload P cont.max : typical motor power in no-overload. Light-overload I N : continuous current allowing 110% I N for 1 min / 5 min at 40 C. P N : typical motor power in light-overload. Heavy-duty I hd : continuous current allowing 150% I hd for 1 min / 5 min at 40 C. P hd : typical motor power in heavy-duty. The current ratings are the same regardless of the supply voltage within one voltage range. The ratings apply in 40 C ambient temperature. In lower temperatures the ratings are higher (except I max ). The rated current of the ACS800 must be higher than or equal to the rated motor current to achieve the rated motor power given in the table. 22 Drive modules

Ratings and dimensions ACS800-x04, supply module, U N =690 V ACS800 - X04 - XXXX - 7 + XXXX Icont. max Nominal ratings Icont. max Imax Dimensions: SN A (AC) A (DC) A (DC) kva No-overload Pcont. max A (DC) Light-overload IN kw (DC) PN A (DC) Heavy-duty Ihd kw (DC) Phd A (DC) Heat dissipation kw Name / module type Frame size U N = 690 V (Range 525-690 V). The power ratings are valid at nominal voltage 690 V. IGBT supply module (ISU) 119 144 216 142 141 139 135 108 105 4.6 ACS800-204-0155-7 R7i + ISU_LCL_6R7 135 164 245 161 160 157 153 122 119 5.2 ACS800-204-0175-7 R7i + ISU_LCL_6R7 180 218 327 215 213 210 204 163 159 8.3 ACS800-204-0220-7 R8i + ALCL-12-7 250 303 453 299 296 291 284 227 221 9.4 ACS800-204-0300-7 R8i + ALCL-13-7 300 364 544 359 355 349 341 272 266 13.3 ACS800-204-0360-7 R8i + ALCL-14-7 400 485 726 478 473 466 454 363 354 14.6 ACS800-204-0480-7 R8i + ALCL-15-7 600 727 1088 717 710 698 682 544 531 26.6 ACS800-204-0720-7 2xR8i + ALCL-24-7 784 951 1422 937 928 913 890 711 694 28.5 ACS800-204-0940-7 2xR8i + ALCL-25-7 1164 1411 2111 1391 1377 1355 1322 1056 1030 42.3 ACS800-204-1390-7 3xR8i + 2xALCL-24-5 1536 1862 2786 1836 1817 1788 1745 1393 1359 55.7 ACS800-204-1840-7 4xR8i + 2xALCL-25-7 6-pulse diode (DSU) 286 350 462 341 316 335 303 280 253 1.5 ACS800-304-0320-7 D3 408 500 700 488 452 480 434 400 361 2.4 ACS800-304-0450-7 D3 571 700 924 683 632 670 605 560 506 3.8 ACS800-704-0640-7 D4 816 1000 1400 976 904 960 867 800 723 5 ACS800-704-0910-7 D4 1143 1400 1848 1366 1265 1340 1211 1120 1012 7.6 ACS800-704-1370-7 2xD4 1518 1860 2604 1815 1681 1790 1617 1490 1346 10 ACS800-704-1810-7 2xD4 2278 2790 3906 2722 2521 2685 2426 2230 2015 15 ACS800-704-2720-7 3xD4 3037 3720 5208 3629 3361 3580 3235 2980 2693 20 ACS800-704-3630-7 4xD4 3796 4650 6510 4537 4202 4475 4043 3720 3361 25 ACS800-704-4540-7 5xD4 6-pulse regenerative (TSU) 711 871 1411 850 784 824 742 637 574 6.3 ACS800-404-0850-7 2xB4 + choke 1171 1435 2325 1400 1292 1353 1219 1050 946 10.2 ACS800-404-1400-7 2xB4 + choke 2176 2664 4316 2600 2399 2519 2269 1993 1795 16.5 ACS800-404-2600-7 2xB5 + choke 2858 3500 5670 3415 3152 3311 2982 2618 2358 20.8 ACS800-404-3600-7 2xB5 + choke 12-pulse diode (DSU) 571 700 924 683 632 670 605 560 506 3.8 ACS800-704-0640-7 D4 816 1000 1400 976 904 960 867 800 723 5 ACS800-704-0910-7 D4 1143 1400 1848 1366 1265 1340 1211 1120 1012 7.6 ACS800-704-1370-7 2xD4 1518 1860 2604 1815 1681 1790 1617 1490 1346 10 ACS800-704-1810-7 2xD4 2278 2790 3906 2722 2521 2685 2426 2230 2015 15 ACS800-704-2720-7 3xD4 3037 3720 5208 3629 3361 3580 3235 2980 2693 20 ACS800-704-3630-7 4xD4 3796 4650 6510 4537 4202 4475 4043 3720 3361 25 ACS800-704-4540-7 5xD4 Nominal Ratings: I cont.max : rated current available continuously without overloadability at 40 C. I max : maximum output current. Typical Ratings: No-overload P cont.max : power in nooverload. Light-overload I N : continuous current allowing 110% I N for 1 min / 5 min at 40 C. P N : power in light-overload. Heavy-duty I hd : continuous current allowing 150% I hd for 1 min / 5 min at 40 C. P hd : power in heavy-duty. The current ratings are the same regardless of the supply voltage within one voltage range. The ratings apply in 40 C ambient temperature. In lower temperatures the ratings are higher (except I max ). Frame size Height Width Depth Weight kg Noise level db(a) Air flow m 3 /h IGBT supply unit (ISU) R7i 1) 963 170 404 37 65 4) 480 R8i 1397 245 596 150 72 4) 1280 2xR8i 1397 245 2) 596 300 74 4) 2560 3xR8i 1397 245 2) 596 450 76 4) 7680 4xR8i 1397 245 2) 596 600 76 4) 5120 LCL-filter for IGBT supply unit (ISU) ISU_LCL_XR7 810 304 292 72-480 ALCL-1X-X 1397 240 499 180-400 ALCL-2X-X 1397 240 573 305-1280 6-pulse diode (DSU) D3 1480 234 400 3) 130 65 720 D4 1480 234 400 3) 180 65 720 2XD4 1480 234 2) 400 3) 360 67 1440 3XD4 1480 234 2) 400 3) 540 68 2160 4XD4 1480 234 2) 400 3) 720 69 2880 5XD4 1480 234 2) 400 3) 900 70 3600 Frame size Height Width Depth Weight kg Noise level db(a) Air flow m 3 /h 6-pulse regenerative (TSU) 2XB4 1808 340 2) 430 110 2) 72 5) 2000 2XB5 1808 420 2) 430 150 2) 75 5) 3400 DC chokes for 6-pulse regenerative (TSU) choke B4 771 348 449 110-600 choke B5 991 348 449 150-700 12-pulse diode (DSU) D4 1480 234 400 3) 180 65 720 2XD4 1480 234 2) 400 3) 360 67 1440 3XD4 1480 234 2) 400 3) 540 68 2160 4XD4 1480 234 2) 400 3) 720 69 2880 5XD4 1480 234 2) 400 3) 900 70 3600 1 ) Dimensions do not include cooling fan. 2 ) Single module only. 3 ) Cable connections need additional space (about 200 ) behind the module. 4 ) Supply modules + fi lters. 5 ) Supply modules + choke. Drive modules 23

Brake options Brake chopper The ACS800 series has inbuilt brake choppers up to frame size R8 (up to 560 kw at 690 V) Above this brake choppers are available as separate brake chopper modules. The brake chopper is part of the standard delivery for the frame sizes R2 and R3 and at 690 V also R4. For the other frames a brake chopper is a selectable option. Braking control is integrated into the ACS800 series. It controls the braking, supervises the system status and detects failures such as brake resistor and resistor cable short circuits, chopper short circuit, and calculated resistor overtemperature. Brake resistor The SACE/SAFUR brake resistors are separately available for all ACS800 types. Resistors other than the standard resistors may be d providing the specified resistance value is not decreased, and the heat dissipation capacity of the resistor is sufficient for the drive application. For ACS800 units, no separate fs in the brake circuit are required if the following conditions are met: The ACS800 mains cable is protected with fs No mains cable/f overrating takes place U N = 230 V (Range 208-240 V) ACS800 type Brake chopper Brake resistor(s) power Continuous Type R E r Prcont Pbrcont [kw] [Ohm] [kj] [kw] ACS800-04-0001-2 0.6 SACE08RE44 44 210 1 ACS800-04-0002-2 0.8 SACE08RE44 44 210 1 ACS800-04-0003-2 1.1 SACE08RE44 44 210 1 ACS800-04-0004-2 1.5 SACE08RE44 44 210 1 ACS800-04-0005-2 2.2 SACE15RE22 22 420 2 ACS800-04-0006-2 3 SACE15RE22 22 420 2 ACS800-04-0009-2 4 SACE15RE22 22 420 2 ACS800-04-0011-2 5.5 SACE15RE13 13 435 2 ACS800-04-0016-2 11 SAFUR90F575 8 1800 4.5 ACS800-04-0020-2 17 SAFUR90F575 8 1800 4.5 ACS800-04-0025-2 23 SAFUR80F500 6 2400 6 ACS800-04-0030-2 28 SAFUR125F500 4 3600 9 ACS800-04-0040-2 33 SAFUR125F500 4 3600 9 ACS800-04-0050-2 45 2 x SAFUR125F500 2 7200 18 ACS800-04-0060-2 56 2 x SAFUR125F500 2 7200 18 ACS800-04-0070-2 68 2 x SAFUR125F500 2 7200 18 U N = 400 V (Range 380-415 V) ACS800 type Brake chopper Brake resistor(s) power Continuous Type R E r Prcont Pbrcont [kw] [Ohm] [kj] [kw] ACS800-04-0003-3 1.1 SACE08RE44 44 210 1 ACS800-04-0004-3 1.5 SACE08RE44 44 210 1 ACS800-04-0005-3 2.2 SACE08RE44 44 210 1 ACS800-04-0006-3 3 SACE08RE44 44 210 1 ACS800-04-0009-3 4 SACE08RE44 44 210 1 ACS800-04-0011-3 5.5 SACE15RE22 22 420 2 ACS800-04-0016-3 7.5 SACE15RE22 22 420 2 ACS800-04-0020-3 11 SACE15RE22 22 420 2 ACS800-04-0023-3 11 SACE15RE22 22 420 2 ACS800-04-0025-3 23 SACE15RE13 13 435 2 ACS800-04-0030-3 28 SACE15RE13 13 435 2 ACS800-04-0035-3 28 SACE15RE13 13 435 2 ACS800-04-0040-3 33 SAFUR90F575 8 1800 4.5 ACS800-04-0050-3 45 SAFUR90F575 8 1800 4.5 ACS800-04-0060-3 56 SAFUR90F575 8 1800 4.5 ACS800-04-0070-3 68 SAFUR80F500 6 2400 6 ACS800-04-0100-3 83 SAFUR125F500 4 3600 9 ACS800-04-0120-3 113 SAFUR125F500 4 3600 9 ACS800-04-0130-3 113 SAFUR125F500 4 3600 9 Brake chopper power Brake resistor(s) ACS800 type 5 / 60 s 10 / 60 s 30 / 60 s Continuous Type R Er Prcont Pbr5 [kw] Pbr10 [kw] Pbr30 [kw] Pbrcont [kw] [Ohm] [kj] [kw] ACS800-04(M)-0080-2 68 68 68 54 SAFUR 160F380 1.78 3600 9 ACS800-04(M)-0100-2 83 83 83 54 SAFUR 160F380 1.78 3600 9 ACS800-04(M)-0120-2 105 67 60 40 2xSAFUR200F500 1.35 10800 27 ACS800-04(M)-0140-2 135 135 135 84 2xSAFUR160F380 0.89 7200 18 ACS800-04(M)-0170-2 135 135 135 84 2xSAFUR160F380 0.89 7200 18 ACS800-04(M)-0210-2 165 165 165 98 2xSAFUR160F380 0.89 7200 18 ACS800-04(M)-0230-2 165 165 165 113 2xSAFUR160F380 0.89 7200 18 ACS800-04(M)-0260-2 223 170 125 64 4xSAFUR160F380 0.45 14400 36 ACS800-04(M)-0300-2 223 170 125 64 4xSAFUR160F380 0.45 14400 36 Brake chopper power Brake resistor(s) ACS800 type 5 / 60 s 10 / 60 s 30 / 60 s Continuous Type R Er Prcont Pbr5 [kw] Pbr10 [kw] Pbr30 [kw] Pbrcont [kw] [Ohm] [kj] [kw] ACS800-04(M)-0140-3 135 135 100 80 SAFUR200F500 2.70 5400 13.5 ACS800-04(M)-0170-3 165 150 100 80 SAFUR200F500 2.70 5400 13.5 ACS800-04(M)-0210-3 165 150 100 80 SAFUR200F500 2.70 5400 13.5 ACS800-04(M)-0260-3 240 240 240 173 2XSAFUR210F575 1.70 8400 21 ACS800-04(M)-0320-3 300 300 300 143 2xSAFUR200F500 1.35 10800 27 ACS800-04(M)-0400-3 375 375 273 130 4xSAFUR125F500 1.00 14400 36 ACS800-04(M)-0440-3 473 355 237 120 4xSAFUR210F575 0.85 16800 42 ACS800-04(M)-0490-3 500 355 237 120 4xSAFUR210F575 0.85 16800 42 24 Hardware options

Brake options U N = 500 V (Range 380-500 V) ACS800 type Brake chopper Brake resistor(s) power Continuous Type R E r Prcont Pbrcont [kw] [Ohm] [kj] [kw] ACS800-04-0004-5 1.5 SACE08RE44 44 210 1 ACS800-04-0005-5 2.2 SACE08RE44 44 210 1 ACS800-04-0006-5 3 SACE08RE44 44 210 1 ACS800-04-0009-5 4 SACE08RE44 44 210 1 ACS800-04-0011-5 5.5 SACE08RE44 44 210 1 ACS800-04-0016-5 7.5 SACE15RE22 22 420 2 ACS800-04-0020-5 11 SACE15RE22 22 420 2 ACS800-04-0025-5 15 SACE15RE22 22 420 2 ACS800-04-0028-5 15 SACE15RE22 22 420 2 ACS800-04-0030-5 28 SACE15RE13 13 435 2 ACS800-04-0040-5 33 SACE15RE13 13 435 2 ACS800-04-0045-5 33 SACE15RE13 13 435 2 ACS800-04-0050-5 45 SAFUR90F575 8 1800 4.5 ACS800-04-0060-5 56 SAFUR90F575 8 1800 4.5 ACS800-04-0070-5 68 SAFUR90F575 8 1800 4.5 ACS800-04-0100-5 83 SAFUR125F500 4 3600 9 ACS800-04-0120-5 113 SAFUR125F500 4 3600 9 ACS800-04-0140-5 135 SAFUR125F500 4 3600 9 ACS800-04-0150-5 135 SAFUR125F500 4 3600 9 U N = 690 V (Range 525-690 V) ACS800 type Brake chopper Brake resistor(s) power Continuous Type R E r Prcont Pbrcont [kw] [Ohm] [kj] [kw] ACS800-04-0011-7 8 SACE08RE44 44 210 1 ACS800-04-0016-7 11 SACE08RE44 44 210 1 ACS800-04-0020-7 16 SACE08RE44 44 210 1 ACS800-04-0025-7 22 SACE15RE22 44 210 1 ACS800-04-0030-7 28 SACE15RE13 22 420 2 ACS800-04-0040-7 22/33 8) SACE15RE13 22 420 2 ACS800-04-0050-7 45 SACE15RE13 13 435 2 ACS800-04-0060-7 56 SACE15RE13 13 435 2 ACS800-04-0070-7 68 SAFUR90F575 8 1800 4.5 ACS800-04-0100-7 83 SAFUR90F575 8 1800 4.5 ACS800-04-0120-7 113 SAFUR90F575 6 2400 6 Brake resistor Height Width Depth Weight kg SACE08RE44 365 290 131 6.1 SACE15RE22 365 290 131 6.1 SACE15RE13 365 290 131 6.8 SAFUR80F500 600 300 345 14 SAFUR90F575 600 300 345 12 SAFUR180F460 1320 300 345 32 SAFUR125F500 1320 300 345 25 SAFUR200F500 1320 300 345 30 SAFUR210F575 1320 300 345 27 Brake chopper power Brake resistor(s) ACS800 type 5 / 60 s 10 / 60 s 30 / 60 s Continuous Type R Er Prcont Pbr5 [kw] Pbr10 [kw] Pbr30 [kw] Pbrcont [kw] [Ohm] [kj] [kw] ACS800-04(M)-0170-5 165 132 2) 120 80 SAFUR200F500 2.70 5400 13.5 ACS800-04(M)-0210-5 198 132 2) 120 80 SAFUR200F500 2.70 5400 13.5 ACS800-04(M)-0260-5 198 1) 132 2) 120 80 SAFUR200F500 2.70 5400 13.5 ACS800-04(M)-0320-5 300 300 300 300 2xSAFUR125F500 2.00 7200 18 ACS800-04(M)-0400-5 375 375 375 234 2XSAFUR210F575 1.70 8400 21 ACS800-04(M)-0440-5 473 473 450 195 2xSAFUR200F500 1.35 10800 27 ACS800-04(M)-0490-5 480 480 470 210 2xSAFUR200F500 1.35 10800 27 ACS800-04(M)-0550-5 600 400 4) 300 170 4xSAFUR125F500 1.00 14400 36 ACS800-04(M)-0610-5 600 3) 400 4) 300 170 4xSAFUR125F500 1.00 14400 36 Brake chopper power Brake resistor(s) ACS800 type 5 / 60 s 10 / 60 s 30 / 60 s Continuous Type R Er Prcont Pbr5 [kw] Pbr10 [kw] Pbr30 [kw] Pbrcont [kw] [Ohm] [kj] [kw] ACS800-04(M)-0140-7 125 5) 110 90 75 SAFUR80F500 6.00 2400 6 ACS800-04(M)-0170-7 125 6) 110 90 75 SAFUR80F500 6.00 2400 6 ACS800-04(M)-0210-7 125 6) 110 90 75 SAFUR80F500 6.00 2400 6 ACS800-04(M)-0260-7 135 7) 120 100 80 SAFUR80F500 6.00 2400 6 ACS800-04(M)-0320-7 300 300 300 260 SAFUR200F500 2.70 5400 13.5 ACS800-04(M)-0400-7 375 375 375 375 SAFUR200F500 2.70 5400 13.5 ACS800-04(M)-0440-7 430 430 430 385 SAFUR200F500 2.70 5400 13.5 ACS800-04(M)-0490-7 550 400 315 225 2xSAFUR125F500 2.00 7200 18 ACS800-04(M)-0550-7 550 400 315 225 2xSAFUR125F500 2.00 7200 18 ACS800-04(M)-0610-7 550 400 315 225 2xSAFUR125F500 2.00 7200 18 SACE 15 RE 13 Maximum braking power of the ACS800 equipped with the standard chopper and the standard resistor. P br5 = 5 s / 1 min. P br10 = 10 s / 1 min. P br30 = 30 s / 1 min. The drive and the chopper will withstand this braking power for 5/10/30 seconds every one minute. Note: The braking energy transmitted to the resistor during any period shorter than 400 seconds may not exceed E r. (E r varies depending on the resistor). P brcont = Continuous brake chopper power. The value applies to the minimum resistance value. With a higher resistance value the P brcont may increase in some ACS800-04 units. R = Resistance value for the listed resistor type. Note: This is also the minimum allowable resistance value for the brake resistor. E r = Energy pulse that the resistor assembly will withstand (400 s duty cycle). This energy will heat the resistor element from 40 C to the maximum allowable temperature. P rcont = Continuous power (heat) dissipation of the resistor when placed correctly. Energy E r dissipates in 400 seconds. 1) 240 kw possible if ambient below 33 C. 2) 160 kw possible if ambient below 33 C. 3) 630 kw possible if ambient below 33 C. 4) 450 kw possible if ambient below 33 C. 5) 135 kw possible if ambient below 33 C. 6) 148 kw possible if ambient below 33 C. 7) 160 kw possible if ambient below 33 C. 8) 22 kw with standard 22 ohm resistor, 33 kw with 32-37 ohm resistor. All brake resistors are to be installed outside the converter module. The SACE brake resistors are inbuilt an IP21 metal housing. The SAFUR brake resistors are inbuilt an IP00 metal frame. Hardware options 25

Brake options Brake chopper and resistor options for ACS800-04 in frame sizes 2xR8i and 3xR8i. Nominal ratings Duty cycle Duty cycle Type (1 min / 5 min) (10 s / 60 s) Er Brake chopper Resistor Pbr. max R Imax Irms Pcont. P br. Irms Pbr. Irms type type kw ohm A A kw kw A kw A kj U N = 400 V (Range 380-415 V) ACS800-04-0610-3 706 2x1.2 1090 298 192 606 936 706 1090-2xNBRA659 - ACS800-04-0770-3 706 2x1.2 1090 298 192 606 936 706 1090-2xNBRA659 - ACS800-04-0870-3 1058 3x1.2 1635 447 288 909 1404 1059 1635-3xNBRA659 - ACS800-04-1030-3 1058 3x1.2 1635 447 288 909 1404 1059 1635-3xNBRA659 - ACS800-04-0610-3 706 2x1.2 1090 168 108 333 514 575 888 24000 2xNBRA659 2x(2xSAFUR180F460) ACS800-04-0770-3 706 2x1.2 1090 168 108 333 514 575 888 24000 2xNBRA659 2x(2xSAFUR180F460) ACS800-04-0870-3 1058 3x1.2 1635 252 162 500 771 862 1332 36000 3xNBRA659 3x(2xSAFUR180F460) ACS800-04-1030-3 1058 3x1.2 1635 252 162 500 771 862 1332 36000 3xNBRA659 3x(2xSAFUR180F460) U N = 500 V (Range 380-500 V) ACS800-04-0760-5 806 2x1.43 1142 272 218 634 782 806 996-2xNBRA659 - ACS800-04-0910-5 806 2x1.43 1142 272 218 634 782 806 996-2xNBRA659 - ACS800-04-1090-5 1208 3x1.43 1713 408 327 951 1173 1209 1494-3xNBRA659 - ACS800-04-1210-5 1208 3x1.43 1713 408 327 951 1173 1209 1494-3xNBRA659 - ACS800-04-0760-5 806 2x1.35 1210 134 108 333 412 575 710 21600 2xNBRA659 2x(2xSAFUR200F500) ACS800-04-0910-5 806 2x1.35 1210 134 108 333 412 575 710 21600 2xNBRA659 2x(2xSAFUR200F500) ACS800-04-1090-5 1208 3x1.35 1815 201 162 500 618 862 1065 32400 3xNBRA659 3x(2xSAFUR200F500) ACS800-04-1210-5 1208 3x1.35 1815 201 162 500 618 862 1065 32400 3xNBRA659 3x(2xSAFUR200F500) U N = 690 V (Range 525-690 V) ACS800-04-0750-7 807 2x2.72 828 214 238 596 534 808 722-2xNBRA669 - ACS800-04-0870-7 807 2x2.72 828 214 238 596 534 808 722-2xNBRA669 - ACS800-04-1060-7 1211 3x2.72 1242 321 357 894 801 1212 1083-3xNBRA669 - ACS800-04-1160-7 1211 3x2.72 1242 321 357 894 801 1212 1083-3xNBRA669 - ACS800-04-0750-7 807 2x1.35 1670 194 108 333 298 575 514 21600 2xNBRA669 2x(2xSAFUR200F500) ACS800-04-0870-7 807 2x1.35 1670 194 108 333 298 575 514 21600 2xNBRA669 2x(2xSAFUR200F500) ACS800-04-1060-7 1211 3x1.35 2505 291 162 500 447 862 771 32400 3xNBRA669 3x(2xSAFUR200F500) ACS800-04-1160-7 1211 3x1.35 2505 291 162 500 447 862 771 32400 3xNBRA669 3x(2xSAFUR200F500) Frame size Height Width Depth Weight Brake Chopper Modules NBRA658 584 334 240 26 NBRA659 584 334 1) 240 26 1) SAFUR180F460 1320 300 1) 345 32 1) SAFUR125F500 1320 300 1) 345 25 1) SAFUR200F500 1320 300 1) 345 30 1) SAFUR210F575 1320 300 1) 345 27 1) 1 ) Single drive module only. P br,max = Maximum braking power of the NBRA-6xx chopper and SAFUR resistor combination. The chopper will withstand this braking power for one minute every ten minutes. Note: The braking energy transmitted to the resistor during any period shorter than 400 seconds may not exceed E r. The standard resistor therefore withstands continuous braking of P br,max typically 20 to 40 seconds (t = E r / P br,max). R = Recoended brake resistor resistance. Also nominal resistance of corresponding SAFUR resistor. I max = Maximum peak current per chopper during braking. Current is achieved with minimum resistor resistance. I rms = Corresponding rms current per chopper during load cycle. Heat loss of brake chopper is 1 % of braking power. Heat loss of section with brake resistors is the same as braking power. 26 Hardware options

Brake options Multidrive module brake units Brake unit type 1 ) Single module only. Pbr. max kw R ohm Nominal ratings Imax A P br,max = Maximum braking power of the NBRA-6xx chopper and SAFUR resistor combination. The chopper will withstand this braking power for one minute every ten minutes. Note: The braking energy transmitted to the resistor during any period shorter than 400 seconds may not exceed E r. The standard resistor therefore withstands continuous braking of P br,max typically 20 to 40 seconds (t = E r / P br,max). R = Recoended brake resistor resistance. Also nominal resistance of corresponding SAFUR resistor. I max = Maximum peak current per chopper during braking. Current is achieved with minimum resistor resistance. = Corresponding rms current per chopper during load cycle. I rms Irms A Pcont. kw Duty cycle (1 min / 5 min) P br. Irms kw A Duty cycle (10 s / 60 s) Noise db(a) Heat loss of brake chopper is 1 % of braking power. Heat loss of section with brake resistors is the same as braking power. Pbr. kw Irms A Air flow m 3 /h Hardware options Resistor type U N = 400 V (Range 380-415 V) Only the chopper Chopper-0210-3 (NBRA658) 230 1.7 384 109 70 230 355 230 355 64 660 - Chopper-0320-3 (NBRA659) 353 1.2 545 149 96 303 468 353 545 64 660 - Chopper-0640-3 (2xNBRA659) 706 0.6 1090 298 192 606 936 706 1090 67 1320 - Chopper-0960-3 (3xNBRA659) 1058 0.4 1635 447 288 909 1404 1059 1635 68 1980 - Chopper-1280-3 (4xNBRA659) 1411 0.3 2180 596 384 1212 1872 1412 2180 69 2640 - Chopper-1600-3 (5xNBRA659) 1764 0.24 2725 745 480 1515 2340 1765 2725 70 3300 - Chopper-1920-3 (6xNBRA659) 2117 0.2 3270 894 576 1818 2808 2118 3270 71 3960 - Chopper with the resistor Chopper-0210-3 (NBRA658) 230 1.7 384 65 42 130 200 224 346 66 2500 2 x SAFUR210F575 Chopper-0320-3 (NBRA659) 353 1.2 545 84 54 167 257 287 444 66 2500 2 x SAFUR180F460 Chopper-0640-3 (2xNBRA659) 706 0.6 1090 168 108 333 514 575 888 69 5000 2 x (2 x SAFUR180F460) Chopper-0960-3 (3xNBRA659) 1058 0.4 1635 252 162 500 771 862 1332 70 7500 3 x (2 x SAFUR180F460) Chopper-1280-3 (4xNBRA659) 1411 0.3 2180 336 216 667 1028 1150 1776 71 10000 4 x (2 x SAFUR180F460) Chopper-1600-3 (5xNBRA659) 1764 0.24 2725 420 270 833 1285 1437 2220 72 12500 5 x (2 x SAFUR180F460) Chopper-1920-3 (6xNBRA659) 2117 0.2 3270 504 324 1000 1542 1724 2664 73 15000 6 x (2 x SAFUR180F460) UN = 500 V (Range 380-500 V) Only the chopper Chopper-0260-5 (NBRA658) 268 2.15 380 101 81 268 331 268 331 64 660 - Chopper-0400-5 (NBRA659) 403 1.43 571 136 109 317 391 403 498 64 660 - Chopper-0800-5 (2xNBRA659) 806 0.72 1142 272 218 634 782 806 996 67 1320 - Chopper-1200-5 (3xNBRA659) 1208 0.48 1713 408 327 951 1173 1209 1494 68 1980 - Chopper-1600-5 (4xNBRA659) 1611 0.36 2284 544 436 1268 1564 1612 1992 69 2640 - Chopper-2000-5 (5xNBRA659) 2014 0.29 2855 680 545 1585 1955 2015 2490 70 3300 - Chopper-2400-5 (6xNBRA659) 2417 0.24 3426 816 654 1902 2346 2418 2988 71 3960 - Chopper with the resistor Chopper-0260-5 (NBRA658) 268 2.00 408 45 36 111 137 192 237 66 2500 2 x SAFUR125F500 Chopper-0400-5 (NBRA659) 403 1.35 605 67 54 167 206 287 355 66 2500 2 x SAFUR200F500 Chopper-0800-5 (2xNBRA659) 806 0.68 1210 134 108 333 412 575 710 69 5000 2 x (2 x SAFUR200F500) Chopper-1200-5 (3xNBRA659) 1208 0.45 1815 201 162 500 618 862 1065 70 7500 3 x (2 x SAFUR200F500) Chopper-1600-5 (4xNBRA659) 1611 0.34 2420 268 216 667 824 1150 1420 71 10000 4 x (2 x SAFUR200F500) Chopper-2000-5 (5xNBRA659) 2014 0.27 3025 335 270 833 1030 1437 1775 72 12500 5 x (2 x SAFUR200F500) Chopper-2400-5 (6xNBRA659) 2417 0.23 3630 402 324 1000 1236 1724 2130 73 15000 6 x (2 x SAFUR200F500) UN = 690 V (Range 525-690 V) Only the chopper Chopper-0400-6 (NBRA 669) 414 107 119 298 267 404 361 64 660 - Chopper-0800-6 (2xNBRA669) 807 1.36 828 214 238 596 534 808 722 67 660 - Chopper-1200-6 (3xNBRA669) 1211 0.91 1242 321 357 894 801 1212 1083 68 1320 - Chopper-1600-6 (4xNBRA669) 1615 0.68 1656 428 476 1192 1068 1616 1444 69 1980 - Chopper-2000-6 (5xNBRA669) 2019 0.54 2070 535 595 1490 1335 2020 1805 70 2640 - Chopper-2400-6 (6xNBRA669) 2422 0.45 2484 642 714 1788 1602 2424 2166 71 3300 - Chopper with the resistor Chopper-0400-6 (NBRA 669) 404 1.35 835 97 54 167 149 287 257 66 2500 2 x SAFUR200F500 Chopper-0800-6 (2xNBRA669) 807 0.68 1670 194 108 333 298 575 514 69 5000 2 x (2 x SAFUR200F500) Chopper-1200-6 (3xNBRA669) 1211 0.45 2505 291 162 500 447 862 771 70 7500 3 x (2 x SAFUR200F500) Chopper-1600-6 (4xNBRA669) 1615 0.34 3340 388 216 667 596 1150 1028 71 10000 4 x (2 x SAFUR200F500) Chopper-2000-6 (5xNBRA669) 2019 0.27 4175 485 270 833 745 1437 1285 72 12500 5 x (2 x SAFUR200F500) Chopper-2400-6 (6xNBRA669) 2422 0.23 5010 582 324 2000 894 1724 1542 73 15000 6 x (2 x SAFUR200F500) Frame size Height Width Depth Weight Brake Chopper Modules NBRA658 584 334 240 26 NBRA659 584 334 1) 240 26 1) SAFUR180F460 1320 300 1) 345 32 1) SAFUR125F500 1320 300 1) 345 25 1) SAFUR200F500 1320 300 1) 345 30 1) SAFUR210F575 1320 300 1) 345 27 1) 27

EMC filters 1 st environment vs 2 nd environment 1 st environment 1 st environment includes domestic premises. It also includes establishments directly connected without intermediate transformer to a low-voltage power supply network which supplies buildings d for domestic purposes. 2 nd environment 2 nd environment includes all establishments other than those directly connected to a low-voltage power supply network which supplies buildings d for domestic purposes. Medium voltage network Propagation of conducted emissions Public low-voltage network 1 st environment Point of measurement for conducted emission Point of measurement Industrial low-voltage network 2 nd environment Illustration of environment classes. Declaration of conformity All declarations concerning CE marking can be found on the www.abb.com/motors&drives website. 28 Hardware options

EMC filters EMC - Electromagnetic Compatibility and modules The electrical/electronic equipment must be able to operate without problems within an electromagnetic environment. This is called iunity. The ACS800 is designed to have adequate iunity against interference from other equipment. Likewise, the equipment must not disturb or interfere with any other product or system within its locality. This is called emission. Each ACS800 model can be equipped with an inbuilt filter to reduce high frequency emission. EMC standards The EMC product standard (EN 61800-3 + Amendment A11(2000)) covers the specific EMC requirements stated for drives (tested with motor and cable) within the EU. The new revision of 61800-3 (2004) product standard can be applied from now on, but latest from 1 st October 2007.EMC standards such as EN 55011, or EN 61000-6-3/4, apply to industrial and hohold equipments and systems including drive component inside. Drive units complying with requirements of EN 61800-3 are always complient with comparable categories in EN 55011 and EN 61000-6-3/4, but not necessarily vice versa. EN 55011 and EN 61000-6-3/4 do not specify cable length nor require a motor to be connected as a load. The emission limits are comparable according to the following table, EMC standards. Selecting an EMC filter The following table gives the correct filter selection. EMC standards EN 61800-3/A11 (2000), product standard 1 st environment, unrestricted distribution 1 st environment, restricted distribution 2 nd environment, unrestricted distribution 2 nd environment, restricted distribution EN 61800-3 (2004), product standard Category C1 Group 1 Class B Category C2 Group 1 Class A Category C3 Group 2 Class A EN 55011, product family standard for industrial, scientific and medical (ISM) equipment EN 61000-6-4, generic emission standard for industrial environments Not applicable Applicable Not applicable EN 61000-6-3, generic emission standard for residential, coercial and light-industrial environment Applicable Not applicable Not applicable Category C4 Not applicable Not applicable Not applicable Type Voltage Frame sizes 1 st environment, restricted distribution, C2, grounded network (TN) 2 nd environment, C3, grounded network (TN) 1) Includes externally mounted components. *) These drives are category C4 equipment and EMC plan for installation is required. 2 nd environment, C3, floating network (IT) 800-04 400-500 R2-R6 +E202 +E200 - *) 690 R2-R6 - +E200 - *) 800-04(M) 400-500 R7-R8 +E202 1) +E210 +E210 690 R7-R8 - +E210 +E210 800-04 400-500 R7-R8 - +E210 +E210 690 R7-R8 - +E210 +E210 Hardware options 29

Sine filters ABB sine filter solution The ACS800 sine filter solution is an ACS800 industrial drive equipped with a sine filter. It enjoys most of the premium features of the standard ACS800 industrial drive. The LC filter suppresses the high frequency components of the output voltage. fi lter Main features Optimized LC design that takes into account switching frequency, voltage drop and filtering characteristics Proven technology as ABB has delivered hundreds of sine filter solutions over the last 20 years Cost effective solution Standard software has all the parameters that need to be set This means that the output voltage waveform is almost sinusoidal without high voltage peaks. Filters are available in IP00 degree of protection over the whole power range. Up to ACS800-04 frame size R6 power range, filters are available also with IP23 enclosure class. The ABB sine filter solution can be d in a variety of applications: Motor does not have adequate insulation for VSD duty Total motor cable length is long e.g. there are a number of parallel motors Step-up applications e.g. medium voltage motor needs to be driven Step-down applications There are industry specific requirements for peak voltage level and voltage rise time Motor noise needs to be reduced Maximum safety and reliability is needed in e.g. EX applications Submersible pumps with long motor cables e.g. in the oil industry Feature Benefit Note Sinusoidal output voltage AP prograing, advanced IRcompensation and flux control No additional stress on the motor insulation: non-vsd compliant motors can be d, motor reliability and lifetime are maximized. Allows the of transformers in the drive output to match any required motor voltage. Standard distribution transformer can be d in step-up solutions. Less motor noise. The effects of load changes to motor voltage can be compensated i.e. the motor always has the optimum voltage. Voltage drop at motor cable can be compen-sated with transformer i.e. there are no restrictions to motor cable length. High starting torque is available with special transformer design. Usually the motor fan is the biggest noise source with sine filter solutions. Scalar control is required with sine filters. 690 V AC 2-13.8 kv AC Step Down transformer ACS800 Sine fi lter Step Up transformer 2-13.8 kv AC 30 Hardware options

Sine filters Types and ratings for ACS800-04(M) Icont. max Pcont. max Noise level Heat dissipation Air flow Type code Filter size IP class Filter height Filter width Filter depth Filter weight Frame size A kw db W m 3 /h kg U N = 400 V (Range 380-415 V). The power ratings are valid at nominal voltage 400 V. 8.5 3 67 180 35 1) ACS800-04-0005-3 NSIN 0006-5 IP00/IP23 160/234 155/230 120/170 6/9 R2 19 7.5 68 350 69 1) ACS800-04-0011-3 NSIN 0016-5 IP00/IP23 280/460 240/470 190/270 15/26 R3 25 11 68 450 69 1) ACS800-04-0016-3 NSIN 0020-5 IP00/IP23 280/460 240/470 200/270 19/30 R3 33 15 68 560 69 1) ACS800-04-0020-3 NSIN 0025-5 IP00/IP23 280/460 240/470 210/270 21/32 R3 39 18.5 69 630 69 1) ACS800-04-0023-3 NSIN 0030-5 IP00/IP23 280/460 240/470 220/270 26/37 R3 44 22 69 630 103 1) ACS800-04-0025-3 NSIN 0030-5 IP00/IP23 280/460 240/470 220/270 26/37 R4 54 26 69 730 103 1) ACS800-04-0030-3 NSIN 0040-5 IP00/IP23 315/460 300/470 228/270 34/45 R4 58 28 69 730 103 1) ACS800-04-0035-3 NSIN 0040-5 IP00/IP23 315/460 300/470 228/270 34/45 R4 72 35 73 950 168 1) ACS800-04-0040-3 NSIN 0050-5 IP00/IP23 315/510 300/580 240/325 37/53 R5 86 42 73 1100 168 1) ACS800-04-0050-3 NSIN 0060-5 IP00/IP23 320/510 300/580 270/325 53/69 R5 102 52 73 1500 168 1) ACS800-04-0060-3 NSIN 0070-5 IP00/IP23 415/510 360/580 210/325 66/82 R5 141 71 75 1800 405 1) ACS800-04-0070-3 NSIN 0100-5 IP00/IP23 415/620 360/700 225/425 69/99 R6 164 84 75 2200 405 1) ACS800-04-0100-3 NSIN 0120-5 IP00/IP23 415/620 360/700 240/425 75/105 R6 199 102 75 2700 405 1) ACS800-04-0120-3 NSIN 0140-5 IP00/IP23 450/620 400/700 500/525 120/165 R6 220 110 75 2700 405 1) ACS800-04-0130-3 NSIN 0140-5 IP00/IP23 450/620 400/700 500/525 120/165 R6 206 100 79 4100 1240 2) ACS800-04(M)-0140-3 NSIN 0315-6 3) IP00 2060 400 600 230 R7 248 120 79 4900 1240 2) ACS800-04(M)-0170-3 NSIN 0315-6 3) IP00 2060 400 600 230 R7 266 130 79 5600 1240 2) ACS800-04(M)-0210-3 NSIN 0315-6 3) IP00 2060 400 600 230 R7 445 215 80 8800 1920 2) ACS800-04(M)-0260-3 NSIN 0485-6 3) IP00 2060 400 600 250 R8 521 250 80 9700 3220 2) ACS800-04(M)-0320-3 NSIN 0900-6 3) IP00 2120 1000 600 690 R8 602 295 80 11100 3220 2) ACS800-04(M)-0400-3 NSIN 0900-6 3) IP00 2120 1000 600 690 R8 693 340 80 12100 3220 2) ACS800-04(M)-0440-3 NSIN 0900-6 3) IP00 2120 1000 600 690 R8 720 350 80 12600 3220 2) ACS800-04(M)-0490-3 NSIN 0900-6 3) IP00 2120 1000 600 690 R8 U N = 500 V (Range 380-500 V). The power ratings are valid at nominal voltage 500 V. 8.1 4.4 67 300 35 1) ACS800-04-0006-5 NSIN 0006-5 IP00/IP23 160/234 155/230 120/170 6/9 R2 19 11 68 590 69 1) ACS800-04-0016-5 NSIN 0016-5 IP00/IP23 280/460 240/470 190/270 15/26 R3 25 15 68 780 69 1) ACS800-04-0020-5 NSIN 0020-5 IP00/IP23 280/460 240/470 200/270 19/30 R3 33 20 68 1000 69 1) ACS800-04-0025-5 NSIN 0025-5 IP00/IP23 280/460 240/470 210/270 21/32 R3 37 23 68 1000 69 1) ACS800-04-0028-5 NSIN 0025-5 IP00/IP23 280/460 240/470 210/270 21/32 R3 42 26 69 1100 103 1) ACS800-04-0030-5 NSIN 0030-5 IP00/IP23 280/460 240/470 220/270 26/37 R4 47 29 69 1400 103 1) ACS800-04-0040-5 NSIN 0040-5 IP00/IP23 315/460 300/470 228/270 34/45 R4 56 34 69 1400 103 1) ACS800-04-0045-5 NSIN 0040-5 IP00/IP23 315/460 300/470 228/270 34/45 R4 65 40 73 1800 168 1) ACS800-04-0050-5 NSIN 0050-5 IP00/IP23 315/510 300/580 240/325 37/53 R5 79 48 73 2200 168 1) ACS800-04-0060-5 NSIN 0060-5 IP00/IP23 320/510 300/580 270/325 53/69 R5 94 60 73 2600 168 1) ACS800-04-0070-5 NSIN 0070-5 IP00/IP23 415/510 360/580 210/325 66/82 R5 124 78 75 3400 405 1) ACS800-04-0100-5 NSIN 0100-5 IP00/IP23 415/620 360/700 225/425 69/99 R6 155 99 75 4300 405 1) ACS800-04-0120-5 NSIN 0120-5 IP00/IP23 415/620 360/700 240/425 75/105 R6 177 114 75 5400 405 1) ACS800-04-0140-5 NSIN 0140-5 IP00/IP23 450/620 400/700 500/525 120/165 R6 200 128 75 5400 405 1) ACS800-04-0150-5 NSIN 0140-5 IP00/IP23 450/620 400/700 500/525 120/165 R6 196 125 79 4300 1240 2) ACS800-04(M)-0170-5 NSIN 0315-6 3) IP00 2060 400 600 230 R7 245 150 79 5400 1240 2) ACS800-04(M)-0210-5 NSIN 0315-6 3) IP00 2060 400 600 230 R7 258 160 79 6200 1240 2) ACS800-04(M)-0260-5 NSIN 0315-6 3) IP00 2060 400 600 230 R7 440 275 80 9600 1920 2) ACS800-04(M)-0320-5 NSIN 0485-6 3) IP00 2060 400 600 250 R8 515 320 80 11100 3220 2) ACS800-04(M)-0400-5 NSIN 0900-6 3) IP00 2120 1000 600 690 R8 550 345 80 11100 3220 2) ACS800-04(M)-0440-5 NSIN 0900-6 3) IP00 2120 1000 600 690 R8 602 375 80 11900 3220 2) ACS800-04(M)-0490-5 NSIN 0900-6 3) IP00 2120 1000 600 690 R8 684 430 80 13400 3220 2) ACS800-04(M)-0550-5 NSIN 0900-6 3) IP00 2120 1000 600 690 R8 700 440 80 14100 3220 2) ACS800-04(M)-0610-5 NSIN 0900-6 3) IP00 2120 1000 600 690 R8 U N = 690 V (Range 525-690 V). The power ratings are valid at nominal voltage 690 V. 13 10.6 67 400 103 1) ACS800-04-0011-7 NSIN 0011-7 IP00/IP23 280/460 240/470 190/270 20/31 R4 17 14 67 460 103 1) ACS800-04-0016-7 NSIN 0020-7 IP00/IP23 280/460 240/470 220/270 26/37 R4 22 18 68 560 103 1) ACS800-04-0020-7 NSIN 0020-7 IP00/IP23 280/460 240/470 220/270 26/37 R4 25 21 68 650 103 1) ACS800-04-0025-7 NSIN 0025-7 IP00/IP23 320/510 300/580 222/325 35/51 R4 31 26 69 740 103 1) ACS800-04-0030-7 NSIN 0040-7 IP00/IP23 320/510 300/580 235/325 40/56 R4 34 29 70 820 103 1) ACS800-04-0040-7 NSIN 0040-7 IP00/IP23 320/510 300/580 235/325 40/56 R4 48 40 73 1000 168 1) ACS800-04-0050-7 NSIN 0060-7 IP00/IP23 330/510 300/580 275/325 57/73 R5 52 46 73 1200 168 1) ACS800-04-0060-7 NSIN 0060-7 IP00/IP23 330/510 300/580 275/325 57/73 R5 79 69 75 1500 405 1) ACS800-04-0070-7 NSIN 0070-7 IP00/IP23 415/510 360/580 240/325 75/91 R6 93 82 75 1900 405 1) ACS800-04-0100-7 NSIN 0120-7 IP00/IP23 500/510 420/580 290/325 126/142 R6 104 92 75 2300 405 1) ACS800-04-0120-7 NSIN 0120-7 IP00/IP23 500/510 420/580 290/325 126/142 R6 130 115 78 4000 540 2) ACS800-04(M)-0140-7 NSIN 0210-6 3) IP00 2060 400 600 250 R7 142 125 79 4600 540 2) ACS800-04(M)-0170-7 NSIN 0210-6 3) IP00 2060 400 600 250 R7 169 150 79 6000 1240 2) ACS800-04(M)-0210-7 NSIN 0210-6 3) IP00 2060 400 600 250 R7 315 280 80 9000 1920 2) ACS800-04(M)-0320-7 NSIN 0485-6 3) IP00 2060 400 600 250 R8 336 300 80 9700 1920 2) ACS800-04(M)-0400-7 NSIN 0485-6 3) IP00 2060 400 600 250 R8 367 330 80 10700 1920 2) ACS800-04(M)-0440-7 NSIN 0485-6 3) IP00 2060 400 600 250 R8 444 395 80 12300 1920 2) ACS800-04(M)-0550-7 NSIN 0485-6 3) IP00 2060 400 600 250 R8 Nominal Ratings: I cont.max: rated current of the drive-fi lter combination available continuously without overload at 40 C. Typical Ratings: P cont.max: typical motor power. Notes: Noise level is a combined value for the drive and the fi lter. Heat dissipation is a combined value for the drive and the fi lter. 1) Air fl ow of the drive. 2) Combined air fl ow of the drive and the fi lter. 3) Dimensions are approximations for a cabinet that can ho the fi lter. Weight is on approximate total weight of the cabinet and the fi lter. The fi lter is delivered as loose items including choke module, capacitors and cooling fan. Hardware options 31

du/dt filters Du/dt filtering suppresses inverter output voltage spikes and rapid voltage changes that stress motor insulation. Additionally, du/dt filtering reduces capacitive leakage currents and high frequency emission of the motor cable as well as high frequency losses and bearing currents in the motor. The need for du/dt filtering depends on the motor insulation. For information on the construction of the motor insulation, consult the manufacturer. If the motor does not fulfil the following requirements, the lifetime of the motor might decrease. Insulated N-end (non-driven end) bearings and / or coon mode filters are also required for motor bearing currents with motors bigger than 100 kw. For more information please see the ACS800 hardware manuals. Filter selection table for ACS800 Motor type Nominal mains voltage (U N ) Motor insulation requirement ABB M2 and U N 500 V Standard insulation system. M3 motors 500 V < U N 600 V Standard insulation system in conjunction with du/dt filtering or reinforced insulation. 600 V < U N 690 V Reinforced insulation system in conjunction with du/dt filtering. ABB form-wound 380 V < U N 690 V Standard insulation system. HXR and AM motors ABB random-wound 380 V < U N 690 V Check motor insulation system with the motor manufacturer. HXR and AM motors du/dt filtering with voltages over 500 V. Non-ABB U N 420 V Insulation system must withstand Û LL =1300 V. Random-wound and Form-wound 420 V < U N 500 V If the insulation system withstands Û LL =1600 V and t=0.2 µs, du/dt filtering is not required. With du/dt filtering, the insulation system must withstand Û LL =1300 V. 500 V < U N 600 V If the insulation system withstands Û LL =1800 V, du/dt filtering is not required. With du/dt filtering, the insulation system must withstand Û LL =1600 V. 600 V < U N 690 V If the motor insulation system withstands Û LL =2000 V and t=0.3 µs, du/dt filtering is not required. With du/dt filtering, the insulation system must withstands Û LL =1800 V. Symbol U N Û LL t Explanation Nominal mains voltage. Peak line to line voltage at motor terminals. Rise time, i.e. interval during which line to line voltage at motor terminals changes from 10% to 90% of full voltage range. 32 Hardware options

du/dt filters External du/dt filters for ACS800-04(M) ACS800 2) du/dt fi lters are inbuilt as standard Applicability du/dt filter type (3 filters included in kits marked *) Unprotected (IP00) NOCH0016-60 NOCH0030-60 NOCH0070-60 *NOCH0120-60 *NOCH0260-60 FAOCH0260-70 FAOCH0320-50 FAOCH0610-70 400 V 500 V 690 V -0003-3 -0004-3 -0004-5 -0005-3 -0005-5 -0006-3 -0006-5 1-0009-3-0009-5-0011-3-0011-5-0011-7-0016-5-0016-3-0020-5-0016-7-0020-3-0020-7 1-0023-3-0025-7-0025-3-0025-5-0030-7-0028-5-0030-3-0030-5-0040-7-0035-3-0040-3-0040-5-0050-7 1-0045-5-0050-3-0050-5-0060-7-0060-5-0060-3-0070-5-0070-7-0070-3-0100-5-0100-7 1-0120-7-0100-3-0120-5 1-0120-3-0140-5 1-0130-3-0150-5-0140-7-0140-3-0170-5-0170-7-0170-3-0210-5-0210-7 1-0210-3-0260-5-0260-7-0260-3-0320-5 1-0320-3-0400-5-0320-7-0400-7-0400-3-0440-5-0440-7-0440-3-0490-5-0490-7 1-0490-3-0550-5-0550-7-0610-5-0610-7 0610-3 2) -0760-5 2) -0750-7 2) -0770-3 2) -0910-5 2) -0870-7 2) -0870-3 2) -1090-5 2) -1060-7 2) -1030-3 2) -1210-5 2) -1160-7 2) -1230-3 2) -1540-5 2) -1500-7 2) -1540-3 2) -1820-5 2) -1740-7 2) -1850-3 2) -2310-5 2) -2120-7 2) -2320-7 2) Separate filters need to be mounted separately. Unprotected IP00 filters must be placed into an enclosure of adequate degree of protection. External du/dt filters for multidrive modules ACS800 1) du/dt fi lters are inbuilt as option 2) du/dt fi lters are inbuilt as standard du/dt filter type (3 filters included in kits marked *) Unprotected (IP00) NOCH0016-60 NOCH0030-60 NOCH0070-60 *NOCH0120-60 *NOCH0260-60 400 V 500 V 690 V -0003-3 -0004-3 -0004-5 -0005-3 -0005-5 -0006-3 -0006-5 1-0009-3-0009-5-0011-3-0011-5-0011-7-0016-5-0016-3-0020-5-0016-7-0020-3-0020-7 1-0025-7-0025-3-0025-5-0030-7-0030-3-0030-5-0040-7-0040-3-0040-5-0050-7 1-0050-3-0050-5-0060-7-0060-5-0060-3-0070-5-0070-7-0070-3-0100-5-0100-7 1-0120-7-0100-3-0120-5 1-0120-3-0140-5 1-0170-3 1) -0210-3 1) -0210-5 1) -0210-7 2) -0260-3 1) -0260-5 1) -0260-7 2) -0320-3 1) -0320-5 1) -0320-7 2) -0390-3 1) -0400-5 1) -0400-7 2) -0510-3 1) -0460-5 1) -0440-7 2) -0610-5 1) -0580-7 2) -0770-3 2) -0910-5 2) -0870-7 2) -1030-3 2) -1210-5 2) -1160-7 2) -1540-3 2) -1820-5 2) -1740-7 2) -2050-3 2) -2430-5 2) -2320-7 2) Dimensions and weights of the du/dt filters du/dt filter Height Width Depth Weight kg NOCH0016-60 195 140 115 2.4 NOCH0030-60 215 165 130 4.7 NOCH0070-60 261 180 150 9.5 NOCH0120-60** 200 154 106 7 NOCH0260-60** 383 185 111 12 FOCH0260-70** 382 190 254 47 FOCH0320-50** 662 319 282 65 FOCH0610-70** 662 319 282 65 ** 3 fi lters included, dimensions apply for one fi lter. Hardware options 33

Standard r interface Standard I/O Analog and digital I/O channels are d for different functions such as control, monitoring and measurement purposes (e.g. motor temperature). In addition, optional I/O extension modules are available providing additional analog or digital I/O connections. Below are the standard drive control I/O of the ABB industrial drive with Factory Macro. For other ACS800 application macros the functions may be different. Standard I/O on RMIO-01 Board 3 analog inputs: differential, coon mode voltage ±15 V, galvanically isolated as a group. One ±0(2)...10 V, resolution 12 bit Two 0(4)...20 ma, resolution 11 bit 2 analog outputs: 0(4)...20 ma, resolution 10 bit 7 digital inputs: galvanically isolated as a group (can be split in two groups) Input voltage 24 V DC Filtering (HW) time 1 ms 3 digital (relay) outputs: Changeover contact 24 V DC or 115/230 V AC Max. continuous current 2 A Reference voltage output: ±10 V ±0.5%, max. 10 ma Auxiliary power supply output: +24 V ±10%, max. 250 ma rpm A X20 1 2 X21 1 2 3 4 5 6 7 8 9 10 11 12 X22 1 2 3 4 5 6 7 8 9 10 11 X23 1 2 X25 1 2 3 X26 1 2 3 X27 1 2 3 VREF- AGND VREF+ AGND AI1+ AI1- AI2+ AI2- AI3+ AI3- AO1+ AO1- AO2+ AO2- Reference voltage -10 VDC, R L > 1 kohm Reference voltage 10 VDC, R L > 1 kohm Speed reference 0(2)... 10 V, R in > 200 kohm By default, not in. 0(4)... 20 ma, R in = 100 ohm By default, not in. 0(4)... 20 ma, R in = 100 ohm Motor speed 0(4)...20 ma = ^ 0...motor nom. speed, R L < 700 ohm Output current 0(4)...20 ma = ^ 0...motor nom. current, R L < 700 ohm DI1 Stop/Start DI2 Forward/Reverse DI3 By default, not in. DI4 Acceleration & deceleration select DI5 Constant speed select DI6 Constant speed select +24VD +24 V DC max. 100 ma +24VD DGND1 Digital ground DGND2 Digital ground DIIL Start interlock (0 = stop) Power supply +24V Auxiliary power supply output, nonisolated, 24 V DC 250 GND ma RO11 RO12 RO13 RO21 RO22 RO23 RO31 RO32 RO33 Relay output 1: ready Relay output 2: running Relay output 3: fault (-1) 34 Control connections and counications

Options Control panel Control panel mounting platforms The industrial drive control panel (+J400) has a multilingual alphanumeric display (4 lines x 20 characters) with plain text messages in 14 languages. The control panel is removable and can be mounted on the drive enclosure or remotely. Start-up assistant Easy coissioning with the start-up assistant. The start-up assistant actively guides you through the coissioning procedure step by step. It also has a unique on-line help function. Actual value display The control panel can display three separate actual values simultaneously. Examples of these are: Motor speed DC bus voltage Frequency Output voltage Current Heatsink temperature Torque Operating hours Power Kilowatt hours References Fault memory An inbuilt fault memory stores information relating to the latest 64 faults, each with a time stamp. Parameter copying The parameter copy feature allows all drive parameters to be copied from one frequency converter to another to simplify coissioning. Centralised control One panel can control up to 31 drives. Easy prograing Parameters are organised into groups for easy prograing. Control panel mounting platforms (+J410 and +J413) On the reverse of the control panel are screw holes from where the control panel can be fixed to a cabinet door. Panel-mounting platforms, which allow the panel to be removed, are also available. There are two variants of the panel-mounting platform: RPMP-11 (+J410) for door mounting RPMP-21 (+J413) for panel mounting inside the cabinet Control connections and counications 35

Options Optional I/O Standard I/O can be extended by using analog and digital extension modules or pulse encoder interface modules which are mounted in the slots on the ASC800 control board. The control board has two slots available for extension modules. More extension modules can be added with the I/O extension adapter which has three slots. The available number and combination of I/O s depends on the control software d. The standard application software supports 2 analog and 2 digital extension modules. Optional I/O Analog I/O extension module RAIO-01 (+L500) 2 analog inputs: galvanically isolated from 24 V supply and ground ±0(2)...10 V, 0(4)... 20 ma or ±0...2 V, resolution 12 bits 2 analog outputs: galvanically isolated from 24 V supply and ground 0(4)...20 ma, resolution 12 bit Digital I/O extension module RDIO-01 (+L501) 3 digital inputs: individually galvanically isolated Signal level 24 to 250 V or 115/230 V AC 2 relay (digital) outputs: Switchover contact 24 V or 115/230 V AC Max. 2 A Pulse encoder interface module RTAC-01 (+L502) 1 incremental encoder input: Channels A, B and Z (zero pulse) Signal level and power supply for the encoder is 24 or 15 V Single ended or differential inputs Maximum input frequency 200 khz I/O extension adapter AIMA-01 Three slots for I/O extension modules Connection to the ACS800 control board through optic link Dimensions: 78 325 28 Mounting: onto 35 7.5 DIN rail External power supply connection Supply voltage: 24 V DC ±10% Current consumption: depends on connected I/O extension modules 36 Control connections and counications

Options Fieldbus control ABB industrial drives have connectivity to major automation systems. This is achieved with a dedicated gateway concept between the fieldbus systems and ABB drives. The fieldbus gateway module can easily be mounted inside the drive. Beca of the wide range of fieldbus gateways, your choice of automation system is independent of your decision to first-class ABB AC drives. Manufacturing flexibility Drive control The drive control word (16 bit) provides a wide variety of functions from start, stop and reset to ramp generator control. Typical setpoint values such as speed, torque and position can be transmitted to the drive with 15 bit accuracy. Drive monitoring A set of drive parameters and/or actual signals, such as torque, speed, position, current etc., can be selected for cyclic data transfer providing fast data for operators and the manufacturing process. Drive diagnostics Accurate and reliable diagnostic information can be obtained via the alarm, limit and fault words, reducing the drive downtime and therefore also the downtime of the manufacturing process. Drive parameter handling Total integration of the drives in the production process is achieved by single parameter read/write up to complete parameter set-up or download. Reduced installation and engineering effort Cabling Substituting the large amount of conventional drive control cabling with a single twisted pair reduces costs and increases system reliability. Design The of fieldbus control reduces engineering time at installation due to the modular structure of the hardware and software. Coissioning and assembly The modular machine configuration allows precoissioning of single machine sections and provides easy and fast assembly of the complete installation. Currently available gateways Fieldbus Protocol Device profile Baud rate PROFIBUS (+K454) DeviceNet (+K451) CANopen (+K457) ControlNet (+K462) Modbus (+K458) Ethernet (+K464) InterBUS-S (+K453) LONWORKS (+K452) DP, DPV1 *) Vendor specifi c profi le PROFIdrive ABB Drives*) - AC/DC drive ABB Drives*) - Drives and motion control ABB Drives*) - AC/DC drive ABB Drives*) 9.6 kbit/s - 12 Mbit/s 125 kbit/s - 500 kbit/s 10 kbit/s - 1 Mbit/s 5 Mbit/s RTU ABB Drives*) 600 bit/s - 19.2 kbit/s Modbus/TCP ABB Drives*) I/O, PCP ABB Drives*) 500 kbit/s LONTALK Variable speed motor drive 10 Mbit/s / 100 Mbit/s 78 kbit/s Control connections and counications 37

Options Remote monitoring and diagnostics tool Browser-based, r-friendly The intelligent ethernet NETA-01 module gives simple access to the drive via the internet, counicating via a standard web browser. The r can set up a virtual monitoring room wherever there is a PC with an Internet connection or via a simple dial-up modem connection. This enables remote monitoring, configuration, diagnostics and, when needed, control. The drive can also provide process related information, such as load level, run time, energy consumption and I/O data, the bearing temperature of the driven machine, for instance. This opens up new possibilities for the monitoring and maintenance of unmanned applications across a range of industries, for instance water, wind power, building services and oil & gas, as well as any application where the r needs access to the drives from more than one location. It also provides an opportunity for OEMs and system integrators to support their installed base globally. No PC needed at local end The intelligent ethernet module has an embedded server with the necessary software for the r interface, counication and data storage. This gives ease of access, realtime information and the possibility for two-way counication with the drive, enabling iediate response and actions, saving time and money. This is possible without using a PC at the local end, as required by other remote solutions. Powerful and versatile Up to nine drives can be connected to the intelligent ethernet module via fiber optic links. It is available as an option for new drives, as well as an upgrade for existing systems. Access to the module is secured by r ID and passwords. It connects to the drive with fiber optic cables. The size of the module is 93 (h) x 35 (w) x 76.5 (d). The web page of the module is opened like any other web address. The home page shows a general overview of the system with traffic lights and action buttons to guide the r through the different sections. Features Virtual monitoring room for Monitoring Configuration of parameter Diagnostics Control, if needed Browser-based access via Intra-/extra-/internet or Simple dial-up modem connection No PC needed at the local end Can be d as a Modbus/TCP bridge for process control. 38 Control connections and counications

Standard application software Standard application software Based on Direct Torque Control technology, the ACS800 offers highly advanced features as standard. The ACS800 standard application software provides solutions to virtually all AC drives applications such as pumps, fans, extruders and conveyors to name few. Adaptive prograing In addition to parameters, industrial drives have the possibility for function block prograing as standard. Adaptive prograing with 15 prograable function blocks makes it possible to replace e.g. relays or even a PLC in some applications. Adaptive prograing can be done either by standard control panel or DriveAP, a r-friendly PC tool. The standard application macros The ACS800 features inbuilt, pre-prograed application macros for configuration of such parameters as inputs, outputs and signal processing. FACTORY SETTINGS for basic industrial applications HAND/AUTO CONTROL for local and remote operation PID CONTROL for closed loop processes SEQUENTIAL CONTROL for repetitive cycles TORQUE CONTROL for processes where torque control is required USER MACRO 1 & 2 for r s own parameter settings Software features A complete set of standard software features offers premium functionality and flexibility. Accurate speed control Accurate torque control without speed feedback Adaptive prograing Automatic reset Automatic start Constant speeds Controlled torque at zero speed DC hold DC magnetizing Diagnostics Flux braking Flux optimization IR compensation Master/follower control Mechanical brake control Motor identification Parameter lock Power loss ride-through Process PID control Prograable I/O Scalar control Speed controller tuning Start-up assistant Support for sine filter in the drive output Trim function User-selectable acceleration and deceleration ramps User adjustable load supervision/limitation Pre-prograed protection functions A wide range of features provides protection for the drive, motor and the process. Ambient temperature DC overvoltage DC undervoltage Drive temperature Input phase loss Overcurrent Power limits Short circuit Prograable protection functions Adjustable power limits Control signal supervision Critical frequencies lock-out Current and torque limits Earth fault protection External fault Motor phase loss Motor stall protection Motor thermal protection Motor underload protection Panel loss Application software and prograing 39

Optional application software Control solutions for different applications ABB provides a set of ready-made control solutions for specific industrial drive applications. Such software adds application-dedicated features and protection without an external PLC - improving productivity and reducing costs. Function blocks are easy to program using the DriveAP 2 PC tool. Main advantages of ABB s control solutions Application-dedicated features Improved production No external PLC User-friendly Easy to Energy savings Smooth power loss ride-through Reduced costs Adaptive protection Multiblock prograing The multiblock prograing application has been specially designed for system integrators and local engineering beca of its flexibility, easy prograing, large number of I/O, master-follower link and fieldbus interfaces. Integrated into the drive control board there are over 200 function blocks on 3 time levels: 20 ms, 100 ms and 500 ms. These benefits mean that it is not always necessary to have separate PLC for drive and process control. Function blocks are easy to program using the DriveAP 2 PC tool. Extended I/O An analog and digital I/O extension is typically installed on the AIMA-01 I/O extension adapters. Three extension modules can be installed on each I/O extension adapter. The maximum number of I/O connections is 62. Motion control The motion control application software is a costeffective solution for precision positioning and synchronization. Intelligent integrated motion control functions and versatile controllability eliminate the need for an external motion controller, even in the most demanding applications, such as materials handling, packaging, printing and the plastics industry. Motion control has four operating modes speed, torque, positioning and synchronization and also provides the possibility for switching online between two selected modes. Intelligent pump control Incorporating all functions coonly required at pumping facilities, intelligent pump control software eliminates the need for an external PLC and can help to save energy, reduce downtime, and prevent pump jaing and pipeline blocking. It is easy-to- software, designed to meet the needs of water and waste utilities, industrial plants and other pump rs. Application prograing template The application prograing template is a simple, ready-made application that can easily be modified using a special function block prograing tool. The application engineer can easily modify the time levels and insert new functions to control the I/O, start/stop coands, and references etc. This is the most flexible software product for tailor-made customer applications. Winder and inline control Winder and inline software products utilize the accurate speed and torque control of the drive in controlling product tension within a process by adjusting the speed or torque, based on the dancer or tension feedback. This precise control ensures high-quality handling of web material. The result is a straightforward, cost-effective solution in web handling applications. Winder control software supports adaptive prograing with 15 blocks. Rod pump and PCP/ESP pump control These pump control software products have been specially developed in close cooperation with the oil industry for artificial oil lifting applications. The products not only increase the production and pump 40 Application software and prograing

efficiency, but also reduce the stress on the complete pump system. The benefits provided include enhanced equipment protection, optimised fluid production, and overall improvement of system performance. Permanent magnet synchronous motor (PMSM) control This control software is available with standard application and system application. The motor control software is specially made for permanent magnet low-speed high-torque motors. This offers precise and reliable control at low speed without speed feedback. Permanent magnet software supports adaptive prograing with 26 blocks. Centrifuge control Practical prograable sequences for conventional centrifuges. Integrated decanter control for the accurate speed difference control of two shafts, where direct counication via the fibre optic link between bowl and scroll is d. Centrifuge control supports adaptive prograing with 15 blocks. Master/follower control Reliable control via the fibre optic link of several drives controlled by one master. This is needed if the motor shafts are coupled together, for example. The master/follower function enables the load to be evenly distributed between the drives. Spinning control & traverse control Spinning control and traverse control make a perfect pair for the precise control of spinning and traverse drives in textile machines. System application This application software is aimed at multi-motor machines producing or processing metal, paper, plastics, textile, rubber and cement, and for numerous other demanding applications. Fast counication with the overriding controller can exchange operative data (references, coand words) and support data (configuration data, diagnostics). Proprietary (DDCS, Drive bus) and generic (PROFIBUS, InterBUS-S, DeviceNet) protocols enable linking of drives to controllers, PLC and PCs. Crane drive control Crane drive control with optimal operational safety and performance built into the drive. Easy installation and start-up reduces the total project costs Ready to with proven crane functionality Accurate and fast response increases the operational productivity Multiple drives can be synchronized with internal optic link, reducing the need for separate controllers. Everything needed is inbuilt Smooth crane operation reduces maintenance costs Available as single-drive or multi-drive with dynamic and regenerative braking Standard ready-to- crane solution. Application software and prograing 41

DriveSize Quality dimensioning DriveSize is a PC program for helping the r to select the optimal motor, frequency converter and transformer, especially in those cases where a straightforward selection from a catalogue is not possible. Additionally it can be d to compute currents, network harmonics and to create documents about the dimensioning based on actual load. DriveSize contains the current versions of the ABB motor and frequency converter catalogues. The default values make DriveSize simple to, but the r is provided with ample options for drive selection. The shortcut keys make drive selection easy while giving the optimal dimensioning result. A manual selection mode is also supported. DriveSize is currently d by more than 1,000 engineers globally. DriveSize is for drive system components 3-phase standard, customized, Ex and r defined motors ABB low voltage AC drives Transformers DriveSize features Selects the optimal motor, drive unit, supply unit and transformer Calculates network harmonics for a single supply unit or for the whole system Allows importation of own motor database Supplies dimensioning results in graphical and numerical format Prints and saves the results The DriveSize PC program can be downloaded from www.abb.com/motors&drives Drives Drive PC Tools DriveSize 42 PC tools

DriveAP Prograing tool DriveAP is a PC software tool for creating, documenting, editing and downloading adaptive programs and multiblock prograing programs. DriveAP 1.1 supports adaptive prograing, whereas DriveAP 2 supports both adaptive prograing and multiblock prograing applications. The adaptive prograing contains 15 function blocks and is available in a standard application. The multiblock prograing application contains over 200 function blocks, and also includes PROFIBUS fieldbus and drive I/O blocks. DriveAP offers a clear and easy way to develop, test and document these programs with a PC. It is a r-friendly tool for modifying function blocks and their connections. No special prograing skills are required, a basic knowledge about block prograing is enough. DriveAP supports IEC61131. The adaptive programs are easy to document as hard copies or store as PC files. The multiblock prograing with all related information is saved directly to the drive. Upload or download Both program types can be uploaded from connected drives and displayed graphically on a PC screen for service or documentation purposes, for example. The adaptive programs and multiblock prograing programs made off-line can be downloaded to any of the connected drives that support corresponding programs. Three operating modes Stand-alone mode - DriveAP is not connected to a drive. The adaptive prograing and multiblock prograing can be carried out in the office, for example, and later downloaded to a drive. Off-line mode - DriveAP is connected to a drive. The adaptive prograing and multiblock prograing can be carried out in batch mode. On-line mode - DriveAP is connected to a drive. Changes to the adaptive programs and multiblock programs are written iediately to the drive and actual values are shown on the screen in real-time. DriveAP features Easy-to- tool, no special skills required Create and download new programs Document programs Upload existing programs from the drive Operating modes Stand-alone Off-Line On-Line DriveAP with adaptive program of standard application. DriveAP with multiblock prograing application. PC tools 43

DriveWindow 2 Start-up and maintenance tool ABB s DriveWindow is an advanced, easy-to- PC software tool for the start-up and maintenance of ABB industrial drives. Its host of features and clear, graphical presentation of the operation make it a valuable addition to your system, providing information necessary for troubleshooting, maintenance and service, as well as training. With DriveWindow the r is able to follow the operation of several drives simultaneously by collecting the actual values from the drives onto a single screen or printout. Additionally, the client part of DriveWindow may reside on one intranet PC, and the server on another PC closer to the drives. This enables easy plant-wide monitoring with two PCs. High speed counication DriveWindow s a high-speed fibre optic cable network with DDCS counication protocol. This enables very fast counication between PC and drives. The fibre optic network is safe and highly iune to external disturbance. A fibre optic counication card inside the computer is needed. Versatile back-up functions Drive parameters can be saved to the PC with DriveWindow, and can easily be downloaded back to the drive whenever needed. The same goes for the software. DriveWindow allows the entire control board software to be saved and restored later, if needed. This makes it possible to one control board as a spare part for many different sizes of drives. DriveWindow 2 features Easy-to- tool for coissioning and maintenance Several drives connected and monitored at the same time Monitor, edit or save signals and parameters, clear graphical presentation High speed counication between PC and drive Versatile back-up functions View data collected and stored in the drive Fault diagnostics; DriveWindow indicates the status of drives, and also reads fault history data from the drive Monitoring drives With DriveWindow you can monitor several drives simultaneously. The history buffer makes it possible to record a large amount of data in the PC s memory. The drive s data logger can be accessed with DriveWindow and viewed in graphical form. The fault logger inside the drive automatically documents every fault, warning and event which occurs. The fault history stored in the drive can be uploaded to your computer. 44 PC tools

DriveWindow Light 2 Start-up and maintenance tool DriveWindow Light 2 is an easy-to- start-up and maintenance tool for ACS800 drives. It supports the following software: standard application, pump control and spinning and traverse control. DriveWindow Light s the drive s panel connector for counication, which makes counication setup very easy. Light software with heavy features DriveWindow Light offers many functions in an easyto- package. It can be d in an offline mode, which enables parameter setting at the office even before going to the actual site. The parameter browser enables viewing, editing and saving of parameters. The parameter comparison feature makes it possible to compare parameter values between the drive and the file. With the parameter subset you can create your own parameter sets. Controlling of the drive is naturally one of the features in DriveWindow Light. With DriveWindow Light, you can monitor up to four signals simultaneously. This can be done in both graphical and numerical format. Any signal can be set to stop the monitoring from a predefined level. Highlights Viewing and setting parameters in offline mode Editing, saving and downloading parameters Comparing parameters Graphical and numerical signal monitoring Drive control DriveWindow Light requirements Windows 98/NT/2000/XP Free serial port from a PC Free control panel connector NPCU-01 PC connection unit PC tools 45

DriveOPC Integration tool DriveOPC is a software package which allows OLE for Process Control (OPC) counication between Windows applications and ABB industrial drives. It allows Object Linking and Embedding (OLE) for Process Control (OPC) counication. This OPC server is an ideal tool for integrating ABB industrial drives and coercial PC software, and creating PC based control and monitoring systems. Remote monitoring DriveOPC enables remote connection over LAN (local area networks). The remote PC can be connected through its IP address (e.g. 164.12.43.33 ) or by the DNS name (e.g. Gitas213 ). OPC based software OPC is an industry standard created in cooperation with Microsoft. It is an open architecture interface design, managed by the international OPC foundation. OPC is meant for different kinds of factory automation. DriveOPC is based on the OPC foundation data access standard 1.0A and Microsoft COM/DCOM technology. DriveOPC has full access to all drives, even when remote connection over LAN is d. High speed counication DriveOPC s a high-speed fibre optic cable network with DDCS counication protocol. This makes counication between PC and drives very fast. The fibre optic network is safe and highly iune to external disturbance. A fibre optic counication card inside the computer is needed. DriveOPC features DriveOPC supports OPC s data access 1.0A. Read access to: Drive status: local, running, direction, fault, warning, reference Signals and parameters Fault logger contents Event logger contents General drive information Data logger settings, status and contents Write access to: Drive control: local, start, stop, forward, reverse, coast stop, reset fault, home, teach-in, contactor on/off, reference Parameters Fault logger clear Data logger init, start, trig, clear 46 PC tools

Services Through its large variety of drive lifecycle services and worldwide service network ABB aims for high drive availability and long lifetime. Training and learning The ABB University provides elearning and hands-on classroom training for its ACS800 drives. Look for the training courses in www.abb.com/drivesservices. Installation and coissioning ABB s professional installation and coissioning service s certified engineers to install and adjust ABB drives according to the application requirements as well as to instruct the r on how to operate the drive. Support line services The support line network provides fast and efficient support for ABB drive rs. The service is available via e-mail and telephone. Maintenance and repair ABB recoends regular preventive maintenance for AC drives throughout their lifetime. Maintaining drives in accordance with the maintenance schedules ensures drive maximum availability, minimum repair costs, optimized performance and extended lifetime. Maintenance can be performed on a contract basis. Drive preventative maintenance (PM) consists of annual drive inspections and component replacements according to the product specific maintenance schedules, using PM kits which contain all the service parts and materials specified for a certain preventive maintenance. ABB s certified engineers provide maintenance and repair services on site and in ABB authorized workshops. Workshop services include e.g.: Module maintenance and repair service instead of performing module maintenance or repair on site, modules can be sent to an ABB workshop. It is often practical to carry out preventive maintenance at the same time. Exchange unit service - a convenient and fast way to fix a problem with a drive is to order an exchange module. A refurbished drive is iediately shipped to the customer (subject to availability). The defective but repairable unit will be returned to ABB. Spare part services Genuine ABB factory-certified drive parts are delivered quickly worldwide. They guarantee full compatibility and are available throughout the drive lifetime following the drive lifecycle model. Spare part services include e.g.: Parts OnLine a web based spare part information and ordering system for quick and easy ordering around the clock. It is gaining popularity over conventional spare part ordering practices. Address: www.abb.com/partsonline Inventory Access - an ABB owned and maintained spare part inventory at the customer s site or at an ABB location provides the customer with up-to-date spare parts with no capital investment for a fee that is based on the inventory value and duration of the contract coitment. Drives product lifecycle management Product lifecycle phases: Active Classic Limited (~ 5 to 10 years) (~ 7 to 10 years) (~ 3 to 5 years) Product, spare parts and related lifecycle services have been released for sale. Service products provide fast drive start-up and they support ease-of- from day one. Migration from limited and obsolete products is supported. Guaranteed product support Product is no longer manufactured, but drive modules are available for spare parts and extensions. Full range of lifecycle services focd on drive reliability and performance is provided. Enhancements are available as far as technology permits. Repair services and parts are available as long as materials can be obtained. ABB recoends migration to active products. Recycling services are available (contingent on the market). Limited product support ABB follows a four-phase model for managing the lifecycles of its drives for enhanced customer support and improved effi ciency. Many ABB products have been and will be supported. Obsolete ABB cannot guarantee availability of product support for technical reasons or at a reasonable cost. Many ABB products have been and will be supported for over 20 years. Services and support 47

Suary of features and options Ordering Code 04 04 (M) 04 104 (inverters) 204 (ISU) 304 and 704 (supply units) Power & voltage range Frame sizes Frame sizes Frame sizes Frame sizes Frame sizes Frame sizes R2 - R6 R7 - R8 nxr8i R2i - 4*R8i R7i - 4*R8i D3-5*D4 230 V: 0.55-55 kw 230 V: 45-200 kw 400 V: 1.1-110 kw 400 V: 90-400 kw 400 V: 400-1450 kw 400 V: 1.1-1600 kw 400 V: 60-1740 kw 400 V: 145-2435 kw 500 V: 1.5-132 kw 500 V: 110-500 kw 500 V: 500-1900 kw 500 V: 1.5-2000 kw 500 V: 70-1975 kw 500 V: 185-3045 kw 690 V: 5.5-110 kw 690 V: 90-560 kw 690 V: 500-1900 kw 690 V: 5.5-1800 kw 690 V: 60-1820 kw 690 V: 250-4200 kw Mounting Wall mounting - 10) 10) - Free-standing - 1) 16) 16) Two mounting directions: bookshelf / fl at (=sideways) H354 or H360 - - - - - Side by side mounting Flange mounting C135 - - - - - Separate drive control unit (RDCU) - 11) - Wheels for easy manoeuvring of the module - - 12) 12) 12) Cabling Supply bottom entry (module terminals) - 10) Supply top entry (module terminals) - - 12) - - Bottom exit (module terminals) H352 2) - - Side exit (module terminals) H354 or H360-3) - - - - Top exit in the module - - - - DC and brake chopper output busbars H356 - - - - DC and brake chopper outputs on H363 different sides of the module - - - - - Vertical busbars for easy motor cable (H355) connection - 3) - - - - Vertical busbars for easy DC/brake (H362) chopper cable connection 3) - - - - Enclosure class IP00 (UL open chassis) - IP20 (UL open chassis) B060 4) - - - - DTC motor control DTC - Software 5) Start-up assistant 6) 6) 6) 6) - - Adaptive prograing 6) 6) 6) 6) - - Motion control N685 - - Optional software optimized for different applications or for enhanced prograability: for more details see section Application software and prograing - - Control panel Alphanumeric 4*20 character control panel J400 X X - Control panel mounting platform J410 or J413 X - Control connections (I/O) and counications 3 pcs analog inputs, prograable, galvanically isolated 9) 9) 2 pcs analog outputs, prograable 9) 9) 7 pcs digital inputs, prograable, galvanically isolated - can be divided into two groups 9) 9) 3 pcs relay outputs, prograable 9) 9) Possibility for external control voltage Inbuilt I/O extension and speed feedback modules: for more details see section Control connections and counications - - Inbuilt adapters for several fi eldbs: for more details see section Control connections and counications - 48 Suary of features and options

Suary of features and options Ordering Code 04 04 (M) 04 104 (inverters) 204 (ISU) 304 and 704 (supply units) Power & voltage range Frame sizes Frame sizes Frame sizes Frame sizes Frame sizes Frame sizes R2 - R6 R7 - R8 nxr8i R2i - 4*R8i R7i - 4*R8i D3-5*D4 230 V: 0.55-55 kw 230 V: 45-200 kw 400 V: 1.1-110 kw 400 V: 90-400 kw 400 V: 400-1450 kw 400 V: 1.1-1600 kw 400 V: 60-1740 kw 400 V: 145-2435 kw 500 V: 1.5-132 kw 500 V: 110-500 kw 500 V: 500-1900 kw 500 V: 1.5-2000 kw 500 V: 70-1975 kw 500 V: 185-3045 kw 690 V: 5.5-110 kw 690 V: 90-560 kw 690 V: 500-1900 kw 690 V: 5.5-1800 kw 690 V: 60-1820 kw 690 V: 250-4200 kw EMC filters EMC 1 st environment (Category C2) E202 7) X 7) - - - - EMC 2 nd environment, earthed networks only (Category C3) E200 - - - - - EMC 2 nd environment, earthed and unearthed networks (Category C3) E210 - - - - - Line filter AC or DC choke - - LCL - - - - - Output filters Coon mode fi lter E208-16) 16) - du/dt fi lters 14) - - Braking Brake chopper D150 8) - - Brake resistor - - Regenerative braking - - - - - Rectifier bridge 6-pulse that can be connected as a 12-pulse one also - - - - 15) Line side apparatus In-built load switch - - - - In-built contactor F250 - - - - - Safety option Prevention of unexpected start-up Q950 X 3) - - Earth fault monitoring, earthed mains Earth fault monitoring, unearthed mains Approvals CE UL, cul, CSA pending GOST R C-Tick pending pending pending pending pending Auxiliary option kits Fs, f bases - - Dc- f switch - - - - - Contactor or breaker - - - Assembly kits for Rittal TS8 cabinets - - IP21 - IP54 door / roof kits - - Standard Option inbuilt X External accessory, with plus code External accessory, no plus code ACS800-04M option - Not available 1) R7 frame size -04M: bottom exit version (+H352) has only wall mounting possibility. 2) R7 frame size only. 3) Option in ACS800-04M. 4) Not available for all variants. 5) Software compatibility with different option modules must be checked from ACS800 software compatibility (doc no. 64638211) in ABB Library. 6) Only in standard software. 7) Not for 690V. 8) Standard in frame sizes R2 and R3 and at 690 V also in R4. 9) Fixed I/O in ISU and DSU. 10) Frame sizes R2i-R7i. 11) Frame sizes R2i-R5i inside of the module. 12) Frame sizes R8i-4xR8i D3-5xD4. 13) Not in frame sizes R2i-R7i. 14) Optional in frame sizes R2i-R7i and 400V/500V R8i. 15) Not in frame size D3. 16) R8i-4xR8i. Suary of features and options 49

Contact and web information www.abb.com/motors&drives ABB's worldwide presence is built on strong local companies working together with the channel partner network. By combining the experience and know-how gained in local and global markets, ABB ensures that its customers in all industries gain the full benefit from its products. For further details about all ABB low voltage AC drives and services, please contact your nearest ABB office or ABB drives channel partner or visit the websites www.abb.com/motors&drives and www.abb.com/ drivespartners. Albania (Tirana) Tel: +355 4 234 368, 363 854 Fax: +355 4 363 854 Croatia (Zagreb) Tel: +385 1 600 8550 Fax: +385 1 619 5111 Israel (Haifa) Tel: +972 4 850 2111 Fax: +972 4 850 2112 Oman (Muscat) Tel: +968 2456 7410 Fax: +968 2456 7406 Sri Lanka (Colombo) Tel: +94 11 2399304/6 Fax: +94 11 2399303 Algeria Tel: +212 2224 6168 Fax: +212 2224 6171 Czech Republic (Prague) Tel: +420 234 322 327 e-mail: motors&drives@cz.abb.com Italy (Milan) Tel: +39 02 2414 3085 Fax: +39 02 2414 3979 Pakistan (Lahore) Tel: +92 42 6315 882-85 Fax: +92 42 6368 565 Sweden (Västerås) Tel: +46 (0)21 32 90 00 Fax: +46 (0)21 14 86 71 Argentina (Valentin Alsina) Tel: +54 (0)114 229 5707 Fax: +54 (0)114 229 5593 Denmark (Skovlunde) Tel: +45 44 504 345 Fax: +45 44 504 365 Ivory Coast (Abidjan) Tel: +225 21 35 42 65 Fax: +225 21 35 04 14 Panama (Panama City) Tel: +507 209 5400, 2095408 Fax: +507 209 5401 Switzerland (Zürich) Tel: +41 (0)58 586 0000 Fax: +41 (0)58 586 0603 Australia (Victoria - Notting Hill) Tel: +1800 222 435 Tel: +61 3 8544 0000 email: drives@au.abb.com Austria (Vienna) Tel: +43 1 60109 0 Fax: +43 1 60109 8312 Azerbaijan (Baku) Tel: +994 12 598 54 75 Fax: +994 12 493 73 56 Bahrain (Manama) Tel: +973 725 377 Fax: +973 725 332 Bangladesh (Dhaka) Tel: +88 02 8856468 Fax: +88 02 8850906 Belarus (Minsk) Tel: +375 228 12 40, 228 12 42 Fax: +375 228 12 43 Belgium (Zaventem) Tel: +32 2 718 6320 Fax: +32 2 718 6664 Bolivia (La Paz) Tel: +591 2 278 8181 Fax: +591 2 278 8184 Bosnia Herzegovina (Tuzla) Tel: +387 35 246 020 Fax: +387 35 255 098 Brazil (Osasco) Tel: 0800 014 9111 Tel: +55 11 3688 9282 Fax: +55 11 3688 9421 Bulgaria (Sofia) Tel: +359 2 981 4533 Fax: +359 2 980 0846 Canada (Montreal) Tel: +1 514 332 5350 Fax: +1 514 332 0609 Chile (Santiago) Tel: +56 2 471 4391 Fax: +56 2 471 4399 China (Beijing) Tel: +86 10 5821 7788 Fax: +86 10 5821 7618 Colombia (Bogotá) Tel: +57 1 417 8000 Fax: +57 1 413 4086 Costa Rica (San Jose) Tel: +506 288 5484 Fax: +506 288 5482 Dominican Republic (Santo Domingo) Tel: +809 561 9010 Fax: +809 562 9011 Ecuador (Quito) Tel: +593 2 2500 645 Fax: +593 2 2500 650 Egypt (Cairo) Tel: +202 6251630 Fax: +202 6251638 El Salvador (San Salvador) Tel: +503 2264 5471 Fax: +503 2264 2497 Estonia (Tallinn) Tel: +372 6801 800 email: info@ee.abb.com Ethiopia (Addis Abeba) Tel: +251 1 669506, 669507 Fax: +251 1 669511 Finland (Helsinki) Tel: +358 10 22 11 Tel: +358 10 222 1999 Fax: +358 10 222 2913 France (Montluel) Tel: +33 (0)4 37 40 40 00 Fax: +33 (0)4 37 40 40 72 Germany (Ladenburg) Tel: +01805 222 580 (Service) Tel: +49 (0)6203 717 717 Fax: +49 (0)6203 717 600 Greece (Athens) Tel: +30 210 289 1 651 Fax: +30 210 289 1 792 Guatemala (Guatemala City) Tel: +502 363 3814 Fax: +502 363 3624 Hungary (Budapest) Tel: +36 1 443 2224 Fax: +36 1 443 2144 India (Bangalore) Tel: +91 80 2294 9585 Fax: +91 80 2294 9389 Indonesia (Jakarta) Tel: +62 21 2551 5555 email: automation@id.abb.com Iran (Tehran) Tel: +98 21 2222 5120 Fax: +98 21 2222 5157 Ireland (Dublin) Tel: +353 1 405 7300 Fax: +353 1 405 7312 Japan (Tokyo) Tel: +81(0)3 5784 6010 Fax: +81(0)3 5784 6275 Jordan (Aan) Tel: +962 6 562 0181 Fax: +962 6 5621369 Kazakhstan (Almaty) Tel: +7 3272 583838 Fax: +7 3272 583839 Kenya (Nairobi) Tel: +254 20 828811/13 to 20 Fax: +254 20 828812/21 Kuwait (Kuwait city) Tel: +965 2428626 ext. 124 Fax: +965 2403139 Latvia (Riga) Tel: +371 7 063 600 Fax: +371 7 063 601 Lithuania (Vilnius) Tel: +370 5 273 8300 Fax: +370 5 273 8333 Luxembourg (Leudelange) Tel: +352 493 116 Fax: +352 492 859 Macedonia (Skopje) Tel: +389 23 118 010 Fax: +389 23 118 774 Malaysia (Kuala Lumpur) Tel: +603 5628 4888 Fax: +603 5635 8200 Mauritius (Casablanca) Tel: +230 208 7644, 211 8624 Fax: +230 211 4077 Mexico (Mexico City) Tel: +52 (55) 5328 1400 ext. 3008 Fax: +52 (55) 5328 7467 Morocco (Casablanca) Tel: +212 2224 6168 Fax: +212 2224 6171 The Netherlands (Rotterdam) Tel: +31 (0)10 407 8886 e-mail: freqconv@nl.abb.com New Zealand (Auckland) Tel: +64 9 356 2170 Fax: +64 9 357 0019 Nigeria (Ikeja, Lagos) Tel: +234 1 4937 347 Fax: +234 1 4937 329 Norway (Oslo) Tel: +47 03500 e-mail: drives@no.abb.com Peru (Lima) Tel: +51 1 561 0404 Fax: +51 1 561 3040 The Philippines (Metro Manila) Tel: +63 2 821 7777 Fax: +63 2 823 0309, 824 4637 Poland (Lodz) Tel: +48 42 299 3000 Fax: +48 42 299 3340 Portugal (Oeiras) Tel: +351 21 425 6000 Fax: +351 21 425 6390, 425 6354 Qatar (Doha) Tel: +974 4253888 Fax: +974 4312630 Romania (Bucharest) Tel: +40 21 310 4377 Fax: +40 21 310 4383 Russia (Moscow) Tel: +7 495 960 2200 Fax: +7 495 960 2201 Saudi-Arabia (Al Khobar) Tel: +966 (0)3 882 9394, ext. 240, 254, 247 Fax: +966 (0)3 882 4603 Senegal (Dakar) Tel: +221 832 1242, 832 3466 Fax: +221 832 2057, 832 1239 Serbia (Belgrade) Tel: +381 11 3094 320, 3094 300 Fax: +381 11 3094 343 Singapore (Singapore) Tel: +65 6776 5711 Fax: +65 6778 0222 Slovakia (Banska Bystrica) Tel: +421 48 410 2324 Fax: +421 48 410 2325 Slovenia (Ljubljana) Tel: +386 1 2445 440 Fax: +386 1 2445 490 South Africa (Johannesburg) Tel: +27 11 617 2000 Fax: +27 11 908 2061 South Korea (Seoul) Tel: +82 2 528 2794 Fax: +82 2 528 2338 Spain (Barcelona) Tel: +34 (9)3 728 8700 Fax: +34 (9)3 728 8743 Syrian Arab Republic Tel: +9626 5620181 ext. 502 Fax: +9626 5621369 Taiwan (Taipei) Tel: +886 2 2577 6090 Fax: +886 2 2577 9467, 2577 9434 Tanzania (Dar es Salaam) Tel: +255 51 2136750, 2136751, 2136752 Fax: +255 51 2136749 Thailand (Bangkok) Tel: +66 (0)2665 1000 Fax: +66 (0)2665 1042 Tunis (Tunis) Tel: +216 71 860 366 Fax: +216 71 860 255 Turkey (Istanbul) Tel: +90 216 528 2200 Fax: +90 216 365 2944 Uganda (Nakasero, Kampala) Tel: +256 41 348 800 Fax: +256 41 348 799 Ukraine (Kiev) Tel: +380 44 495 22 11 Fax: +380 44 495 22 10 The United Arab Emirates (Dubai) Tel: +971 4 3147500, 3401777 Fax: +971 4 3401771, 3401539 United Kingdom (Daresbury, Warrington) Tel: +44 1925 741 111 Fax: +44 1925 741 693 Uruguay (Montevideo) Tel: +598 2 707 7300 Tel: +598 2 707 7466 USA (New Berlin) Tel: +1 800 752 0696 Tel: +1 262 785 3200 Fax: +1 262 785 0397 Venezuela (Caracas) Tel: +58 212 2031949 Fax: +58 212 237 6270 Vietnam (Hochiminh) Tel: +84 8 8237 972 Fax: +84 8 8237 970 Zimbabwe (Harare) Tel: +263 4 369 070 Fax: +263 4 369 084 50 Contact and web information

Notes 51

Copyright ABB 2006. All rights reserved. Specifi cations subject to change without notice. ABB Oy Drives P. O. Box 184 FI - 00381 Helsinki Finland Telephone +358 10 22 11 Telefax +358 10 22 22681 Internet www.abb.com/motors&drives