Automotive Technology It takes more than the turn of a key to make a car go. Working on today's cars requires an understanding of the science and technology that goes into the modern automobile. In the Automotive Technology program at the Institute of Technology at Central, students spend time in the classroom and then apply what they've learned on real cars in our state-of-the-art facilities. Training includes diagnosis and repair of all automotive systems using modern tools and diagnostic equipment, with an emphasis on: Engine management systems Driveability Drivetrain systems Chassis Maintenance CAREER OPPORTUNITIES: Professional Mechanic, Body Shop Technician, Automotive Repair, Garage Owner 1
Course of Study Automotive Technology 7th Grade 8th Grade 9th Grade 10th Grade 11th Grade 12th Grade 7th Grade CC 8th Grade CC Automotive Tech 100 (AUT100) (1 Credit) Automotive Tech 200 (AUT200) (2 Credits) Automotive Tech 300 (AUT300) (1 Credit) Automotive Integrated Math 200 (1 Credit) Automotive Tech 400 (AUT400) (2 Credits) Automotive Integrated ELA 400 (1 Credit) DISTRICT REQUIREMENTS Students must pass Automotive Tech Level 100 and 300 to challenge the course approved technical. All students in 9th grade will receive Career and Financial Management. Student will receive the Endorsement upon successful completion of the Automotive Tech sequence and must pass the prescribed technical and completion of a commencement level project. Student will have earned the 12th grade integrated ELA credit upon successful completion of the Automotive Tech 200, 300 and 400. 2
Course Syllabus Introduction to Automotive Technology COURSE DESCRIPTION This course is the foundation for the four year program in Automotive Technology, as well as a career in Automotive Technology. Students will explore the career options available in the Automotive Technology field as well as the requirements of a professional service technician and develop personal short and long term goals for professional growth. The course emphasizes workplace safety and includes work toward OSHA certification. Classroom and shop activities simulate automotive service industry operations through the use of training aids, shop vehicles, and customer work as available. Completion of the course will give the student a good foundation in the operation,, and repair of an automobile and prepare students for further advanced training. COURSE OBJECTIVES 1. Students will know the available career options in the field of Automotive Technology. 2. Students will develop a career plan based on aptitudes and interests. 3. Students will understand the importance of personal and workplace safety. 4. Students will develop and improve skills working on basic automotive. 5. Students will begin to prepare for NYS Inspection certification. INTEGRATED ACADEMICS N/A EQUIPMENT AND SUPPLIES School will provide: Required and up to date equipment and supplies that will be provided through local vendors and made accessible to all automotive students. Student will provide: Open minds, strong work ethic, and all necessary related skills to complete the course. TEXTBOOK Erjavec, Jack. Automotive Technology A Systems Approach, 3rd edition. Clifton Park, NY: Delmar Cengage Learning, 1999. GRADING 40% Daily Grade (punctuality, preparedness, willingness to learn, and behavior) 10% Quizzes 10% Tests 40% Quality of Work ADDITIONAL COURSE POLICIES N/A AUTOMOTIVE TECHNOLOGY Course Calendar Introduction to Automotive Technology QUARTER UNITS OF STUDY 1 Career Exploration in Automotive Technology Automotive Safety and Equipment OSHA Certification Tire Design Tire Repair 2 3 Maintenance Procedures Oil Changes and Other Basic Services 4 Equipment Safety and Operation Responsibilities of Entry Level Mechanics 3
Time Frame WEEK 1 Career Exploration in Automotive Technology What are some of the career paths within the Automotive Technology field? What are basic requirements to become an entry level mechanic? different career opportunities that are available in Automotive Technology Develop a personal career plan based on aptitudes and interests Personal career plan with short and long term goals TRC09 CCLS, RST.9-10.1,2 WEEKS 2-5 Automotive Safety and Equipment Why is safety important in the auto industry? How does an individual affect personal, workplace, and customer safety? importance of personal, workplace, and customer safety Explain the importance of protective clothing and equipment Identify and demonstrate safe use of chemicals Identify fire protection and demonstrate proper use of fire equipment Identify and classify hand and power tools TRC06 4
Time Frame WEEKS 6-10 Equipment Safety and Operation What are the major safety concerns when working with power equipment? What are the proper techniques for operating shop equipment and tools? OSHA safety requirements when performing automobile environmental impacts of automotive services and the procedures required to mitigate negative impacts Demonstrate the correct techniques for operating shop equipment and tools Perform preventive on hand and power tools Explain and demonstrate correct use of shop equipment including floor jacks, jack stands and lifts Interim TRC06 CCLS, AUTOMOTIVE TECHNOLOGY WEEKS 11-15 OSHA Certification How can you prevent injuries at work? How is OSHA training transferable to other industries and private sectors? Obtain OSHA Certification Participation in SkillsUSA Competition Interim TRC06 WEEKS 16-23 Tire Design Tire Repair What are the components of tire structure? What are the safety concerns when working on tires and tire repairs? Determine appropriate tire sizes Understand and use the appropriate repair procedures for tire leaks and punctures Mount and balance tires/wheels utilizing proper specifications Interim 5
Time Frame WEEKS 23-28 Maintenance Procedures What reference system is utilized in the shop for procedures? What are the eight ASE areas? What procedures are required for each area? Understand that procedures for most repairs are manufacturer/model specific Explain where to obtain the correct procedures and specifications for and repairs Identify the eight basic areas of automotive knowledge and skills defined by ASE Explain required procedures necessary for safe automobile operation including checking and adjusting fluid levels, and inspecting and replacing belts and filters Interim CCLS,,7 6
Time Frame WEEK 29-34 Oil Changes and Other Basic Services What are the basic under car services? What are the common tool requirements for each service? Explain where to find specific manufacturers and intervals information Understand and use the information system available in the shop OSHA safety requirements when performing automobile environmental impacts of automotive services and the procedures required to mitigate negative impacts Demonstrate the correct techniques for oil changes and other basic services Interim CCLS,,7 AUTOMOTIVE TECHNOLOGY WEEKS 35-40 Responsibilities of Entry Level Mechanics What are basic responsibilities for the shop employee? What are the most important components of successful customer service? What is involved in shop management? Explain the responsibilities of an entry level technician in a shop environment important components of successful customer service Explain the responsibilities involved in managing an automotive repair shop Written Final Final TRC07 7