LIFTING HIRE. General Lifting Equipment Material Handling Moving & Winching Crane & Site Jacking Equipment Load Measuring Safety & Access

LIFTING HIRE. General Lifting Equipment Material Handling Moving & Winching Crane & Site Jacking Equipment Load Measuring Safety & Access

LIFTING HIRE GENERAL LIFTING. MANUAL CHAINBLOCKS Designed for easy raising and lowering of equipment in a controlled manner. Available up to 30 tonnes capacity. Various height of lift available. 250kg 30 tonnes capacity Note: Higher capacity blocks available on request L023 19.29 25.72 32.15 500KG 3M L024 22.74 30.32 37.90 500KG 6M L025 25.29 33.72 42.15 500KG 9M L029 21.90 29.20 36.50 1 TONNE 3M L031 25.29 33.72 42.15 1 TONNE 6M L032 30.87 41.16 51.45 1 TONNE 9M L037 29.13 38.84 48.55 2 TONNE 3M L038 32.61 43.48 54.35 2 TONNE 6M L039 36.00 48.00 60.00 2 TONNE 9M L043 33.42 44.56 55.70 3 TONNE 3M L044 42.81 57.08 71.35 3 TONNE 6M L045 51.87 69.16 86.45 3 TONNE 9M L049 53.52 71.36 89.20 5 TONNE 3M L050 68.97 91.96 114.95 5 TONNE 6M L051 77.55 103.40 129.25 5 TONNE 9M LEVERHOISTS L515 26.19 34.92 43.65 750KG 1.5M LF16 27.42 36.56 45.70 750KG 3.5M L516 29.13 38.84 48.55 1500KG 1.5M LF17 31.29 41.72 52.15 1500KG 3.5M L517 23.13 30.84 38.55 3 TONNE 1.5M LF18 35.58 47.44 59.30 3 TONNE 3.5M L518 59.52 79.36 99.20 6 TONNE 1.5M LF19 63.81 85.08 106.35 6 TONNE 3.5M LB16 109.14 145.52 181.90 9 TONNE 1.5M 360 CHAINBLOCKS ELECTRIC CHAINHOISTS Ideal for special rigging applications. Handwheel cover rotates 360 for hoist operation in any direction This rugged, compact tool is designed for close quarter lifting and pulling applications. 250kg 9 tonnes capacity For easy lifting of up to 5 tonnes with push button pendant control. 110v single phase available up to 3,000kg capacity 415v 3 phase available up to 5,000kg capacity Various heights of lift to suit most applications LF27 30.87 41.16 51.45 1 TONNE 6M LF28 36.00 48.00 60.00 2 TONNE 6M LM45* 28.65 38.19 47.75 1 TONNE 4M LM46* 38.45 51.26 64.10 2 TONNE 4M *NEW FLEETING TYPE 1 & 2 TONNE CAPACITY AVAILABLE L186 90.81 121.08 151.35 500KG 6M L188 100.17 133.56 166.95 500KG 12M L189 104.88 139.84 174.80 500KG 20M L192 109.14 145.52 181.90 1 TONNE 6M L194 126.78 169.04 211.30 1 TONNE 12M L195 149.82 199.76 249.70 1 TONNE 20M L197 149.82 199.76 249.70 2 TONNE 6M L198 167.43 223.24 279.05 2 TONNE 9M L199 171.72 228.96 286.20 2 TONNE 12M LM08 19.77 26.36 32.95 RADIO CONTROLLED 174 Find your nearest Branch: 0870 514 3391

AIR POWERED CHAINHOIST For lifting applications where continuous use is required. Up to 15 tonnes capacity Various heights of lift Avoid duty cycle restrictions Note: Please ensure sufficient air supply is available L391 90.81 121.08 151.35 1 TONNE 6M L392 104.88 139.84 174.80 1 TONNE 9M L393 109.14 145.52 181.90 1 TONNE 12M L397 126.78 169.04 211.30 2 TONNE 6M L398 135.75 181.00 226.25 2 TONNE 9M L399 145.11 193.48 241.85 2 TONNE 12M L504 149.82 199.76 249.70 3 TONNE 6M L505 154.11 205.48 256.85 3 TONNE 9M L506 163.14 217.52 271.90 3 TONNE 12M LD90 22.74 30.32 37.90 FILTER LUBRICATOR BEAM TROLLEY CLAMPS Up to 5 tonnes capacity available Quick and easy installation secured by locking lever Can be used as a fixed clamp or as a trolley Note: Please specify flange size when ordering BEAM TROLLEYS PUSH TRAVEL Up to 15 tonnes capacity available Adjustable to suit a wide range of beam sizes Note: Please specify flange size when ordering CODE 1 DAY 2 DAYS 7 DAYS INFO L009 11.22 14.96 18.70 500KG L013 16.29 21.72 27.15 1 TONNE L014 21.90 29.20 36.50 2 TONNE L016 23.55 31.40 39.25 3 TONNE L018 31.71 42.28 52.85 5 TONNE BEAM TROLLEYS GEARED Up to 15 tonnes capacity available Adjustable to suit a wide range of beam sizes Note: Please specify flange size and hand chain length when ordering CODE 1 DAY 2 DAYS 7 DAYS INFO L004 17.61 23.48 29.35 1 TONNE L005 21.90 29.20 36.50 2 TONNE L006 29.97 39.96 49.95 3 TONNE LC42 45.45 60.60 75.75 5 TONNE LIFTING HIRE GENERAL LIFTING. BEAM CLAMPS A fixed lifting point 1 10 tonnes capacities available Note: Please specify flange size when ordering LI13 25.29 33.72 42.15 2 TONNE LI35 28.74 38.32 47.90 3 TONNE LH90 36.00 48.00 60.00 5 TONNE CODE 1 DAY 2 DAYS 7 DAYS INFO L012 17.13 22.84 28.55 1 TONNE L319 18.45 24.60 30.75 2 TONNE L323 19.29 25.72 32.15 3 TONNE L325 21.90 29.20 36.50 5 TONNE L327 35.16 46.88 58.60 10 TONNE or visit our website at www.brandonhire.co.uk 175

LIFTING HIRE GENERAL LIFTING. STEEL DEE SHACKLES We stock a huge range of shackles for many applications. Please contact your local branch with details of specific requirements. WLL D D W S E WEIGHT CODE 1 DAY 2 DAYS 7 DAYS TON IN IN IN IN IN KG SMALL DEE 0.30 1/4 3/8 3/8 7/8 3/4 0.06 0.60 3/8 1/2 5/8 1.3/8 1.00 0.15 1.00 1/2 5/8 7/8 1.7/8 1.1/4 0.33 L653 2.82 3.76 4.70 1.75 5/8 3/4 1.00 2.1/4 1.1/2 0.61 2.50 3/4 7/8 1.1/4 2.3/4 1.3/4 0.93 3.50 7/8 1.00 1.3/8 3.1/4 2.00 1.80 4.50 1.00 1.1/8 1.1/2 3.5/8 2.1/4 2.15 5.50 1.1/8 1.1/4 1.3/4 4.1/8 2.1/2 3.02 7.00 1.1/4 1.3/8 1.7/8 4.1/2 2.3/4 4.20 8.00 1.3/8 1.1/2 2.1/8 5.00 3.00 5.34 LH09 5.61 7.48 9.35 10.75 1.1/2 1.3/4 2.3/8 5.1/2 3.1/2 8.36 13.00 1.5/8 1.7/8 2.1/2 5.7/8 3.3/4 9.35 14.75 1.3/4 2.00 2.3/4 6.3/8 4.00 12.39 16.75 1.7/8 2.1/8 2.7/8 6.3/4 4.1/4 15.30 19.00 2.00 2.1/4 3.00 7.1/4 4.1/2 18.40 20.00 2.1/8 2.3/8 3.1/4 7.3/4 4.3/4 23.60 LARGE DEE 0.25 1/4 3/8 1/2 1.00 3/4 0.06 0.50 3/8 1/2 3/4 1.1/2 1.00 0.16 LB41 2.16 2.88 3.60 0.75 1/2 5/8 1.1/8 2.1/8 1.1/4 0.35 LA61 2.40 3.20 4.00 1.50 5/8 3/4 1.1/4 2.1/2 1.1/2 0.63 L654 2.97 3.96 4.95 2.00 3/4 7/8 1.1/2 2.7/8 1.3/4 1.00 L655 3.30 4.40 5.50 3.00 7/8 1.00 1.3/4 3.1/4 2.00 1.54 L656 3.63 4.84 6.05 3.75 1.00 1.1/8 2.00 3.3/4 2.1/4 2.21 L657 3.72 4.96 6.20 5.00 1.1/8 1.1/4 2.1/8 4.1/8 2.1/2 3.11 L658 3.87 5.16 6.45 6.00 1.1/4 1.3/8 2.3/8 4.1/2 2.3/4 4.33 L659 5.04 6.72 8.40 7.00 1.3/8 1.1/2 2.5/8 5.00 3.00 5.33 L798 5.19 6.92 8.65 9.50 1.1/2 1.3/4 2.3/4 5.3/8 3.1/2 8.46 11.25 1.5/8 1.7/8 3.00 5.3/4 3.3/4 10.48 13.00 1.3/4 2.00 3.1/4 6.1/8 4.00 12.66 14.25 1.7/8 2.1/8 3.5/8 7.00 4.1/4 15.34 16.25 2.00 2.1/4 3.7/8 7.3/8 4.1/2 18.50 18.00 2.1/8 2.3/8 4.1/8 7.3/4 4.3/4 23.80 20.00 2.1/4 2.1/2 4.1/4 8.1/4 5.00 28.60 25.00 2.1/2 2.7/8 4.3/4 9.1/4 5.3/4 38.00 KEY d = Material Diameter D = Pin Diameter W = Jaw Width S = Inside Body Length e = Boss Diameter 176 Find your nearest Branch: 0870 514 3391

MANHOLE LIFTING PINS Used with slings (see page 179) Usually used in threes Diameter: 32mm quick release type ALLOY SHACKLES Items meet the performance requirements of U.S. Fed specification RR-C-271 Dee type also available KEY d = Material Diameter D = Pin Diameter W = Jaw Width S = Inside Body Length of 'BOW' Shackle e = Inside Body Length of 'DEE' Shackle LIFTING HEADS For locating onto pre-cast concrete anchors. LC96 12.03 16.04 20.05 30MM 1.5 TONNE PER PIN LF55 12.84 17.12 21.40 32MM 1 TONNE PER PIN QUICK RELEASE LA76 13.77 18.36 22.95 2.5 TONNE LF08 9.06 12.08 15.10 1.5-2.5 TONNE LF81 13.77 18.36 22.95 5 TONNE LL85 57.21 76.28 95.35 6-10 TONNE CONTAINER LIFTING LUGS Top set has 56 tonnes capacity Bottom set has up to 40 tonnes capacity LA08 9.45 12.60 15.75 EACH (USED IN SETS OF 4) WLL D D W S E RADIUS WEIGHT CODE 1 DAY 2 DAYS 7 DAYS TON IN IN IN IN IN KG BOW DEE BOW SHACKLES 0.33 5.0 6.0 9.5 22.0 16.0 0.02 0.50 7.0 8.0 12.0 29.0 25.0 20.0 0.06 L883 2.40 3.20 4.00 0.75 9.0 10.0 13.5 32.0 27.0 21.0 0.11 L636 2.40 3.20 4.00 1.00 10.0 11.0 17.0 36.5 31.0 26.0 0.15 L637 2.82 3.76 4.70 1.50 11.0 12.0 18.5 43.0 37.0 29.0 0.21 L638 2.97 3.96 4.95 2.00 13.5 16.0 22.0 51.0 43.0 32.0 0.37 L639 3.30 4.40 5.50 3.25 16.0 19.0 27.0 64.0 51.0 43.0 0.65 L640 3.63 4.84 6.05 4.75 19.0 22.0 31.0 76.0 59.0 51.0 1.06 L641 3.87 5.16 6.45 6.50 22.0 25.0 36.0 83.0 73.0 58.0 1.56 L642 5.04 6.72 8.40 8.50 25.0 28.0 43.0 95.0 85.0 68.0 2.32 L643 5.43 7.24 9.05 9.50 28.0 32.0 47.0 108.0 90.0 75.0 3.28 L644 6.18 8.24 10.30 12.0 32.0 35.0 51.0 115.0 94.0 83.0 4.51 L645 7.74 10.32 12.90 13.5 35.0 38.0 57.0 133.0 115.0 92.0 5.93 L646 9.48 12.64 15.80 17.0 38.0 42.0 60.0 146.0 127.0 99.00 7.89 L647 10.80 14.40 18.00 25.0 45.0 50.0 74.0 178.0 149.0 126.0 13.40 L648 12.03 16.04 20.05 35.0 50.0 57.0 83.0 197.0 171.0 138.0 18.85 L649 24.03 32.04 40.05 55.0 65.0 70.0 105.0 254.0 203.0 180.0 37.86 L650 25.71 34.28 42.85 85.0 90.0 95.0 146.0 381.0 60.0 L651 49.23 65.64 82.05 LIFTING HIRE GENERAL LIFTING. or visit our website at www.brandonhire.co.uk 177

LIFTING HIRE GENERAL LIFTING. GANTRIES Lightweight and portable, the gantry eases the burden of manual handling. Available from 0.5 5 tonnes capacity Simple span adjustment on aluminium gantries Supplied on locking 360º castor wheels Beam trolley supplied with unit on aluminium gantries Lightweight, portable and easy on site assembly Greater working capacities available Extra beam trolleys available LE48 135.75 181.00 226.25 1 TONNE LD72 180.69 240.92 301.15 2 TONNE LK18 206.37 275.16 343.95 EXTRA HIGH 2 TONNE LE55 199.53 266.04 332.55 3 TONNE L330 63.81 85.08 106.35 0.5 TONNE/STEEL L332 80.94 107.92 134.90 2 TONNE/STEEL LL97 328.83 438.44 548.05 5 TONNE NOTE: OTHER LENGTH BEAMS AVAILABLE AT ADDITIONAL COST BUILDER S GANTRY HOIST Lightweight and portable Safe working loads of 300kg and 500kg See page 196 for accessories LA45 135.72 180.96 226.25 1 PHASE 110V 300KG LB63 154.11 205.48 256.85 3 PHASE 415V 500KG NOTE: BALLAST CAN BE SUPPLIED AT EXTRA COST SHEAR LEGS Basic lifting aid from 500kg to 2 tonnes capacity. Adjustable with central lifting eye to attach lifting equipment. See page 194 for hoists. LC24 40.26 53.68 67.10 500KG L438 45.45 60.60 75.75 1000KG L439 50.97 67.96 84.95 2000KG LIFTING MAGNETS The lifting magnets are suitable for flat and round material. Easy ON/OFF switching. MANHOLE COVER LIFTER Easy to assemble hydraulic manhole cover lifter. Develops 1.5 tonnes of force 2 and 4 key types available LB24 55.23 73.64 92.05 250KG FLAT MATERIAL LB23 80.94 107.92 134.90 1000KG FLAT MATERIAL LH31 122.49 163.32 204.15 2000KG FLAT MATERIAL LA02 60.84 81.12 101.40 1.5 TONNE FORCE 178 Find your nearest Branch: 0870 514 3391

CHAINSLINGS Our range of chainslings are designed to support most applications. Single, double, 3 and 4 leg slings available in various capacities and lengths Loadings are related to 1 leg, 2 leg, 3 leg and 4 leg chainslings Brandon Lifting stock a huge range of chainslings. Contact your local branch with details of your specific requirements. WEBBING SLINGS AND ROUNDSLINGS WORKING LOAD LIMIT (WLL) IN TONNES ANGLE 90º 0 45º 45 60º 0 45º 45 60º 0 45º 45 60º FACTOR 1 1.4 1 2.1 1.5 2.1 1.5 7MM 1.50 2.12 1.50 3.15 2.24 3.15 2.24 8MM 2.00 2.80 2.00 4.25 3.00 4.25 3.00 10MM 3.15 4.25 3.15 6.70 4.75 6.70 4.75 13MM 5.30 7.50 5.30 11.20 8.00 11.20 8.00 16MM 8.00 11.20 8.00 17.00 11.80 17.00 11.80 20MM 12.50 17.50 12.50 26.50 19.00 26.50 19.00 22MM 15.00 21.20 15.00 31.50 22.40 31.50 22.40 26MM 21.20 30.00 21.20 45.00 31.50 45.00 31.50 32MM 31.50 45.00 31.50 67.00 47.50 67.00 47.50 LIFTING HIRE GENERAL LIFTING. WEBBING SLINGS ROUNDSLINGS L691 6.93 9.24 11.55 1 TONNE 1M L695 7.74 10.32 12.90 1 TONNE 2M L804 9.06 12.08 15.10 1 TONNE 3M L831 12.03 16.04 20.05 1 TONNE 6M L692 7.74 10.32 12.90 2 TONNE 1M L696 9.90 13.20 16.50 2 TONNE 2M L805 11.61 15.48 19.35 2 TONNE 3M L832 16.71 22.28 27.85 2 TONNE 6M L693 9.90 13.20 16.50 3 TONNE 1M L697 11.61 15.48 19.35 3 TONNE 2M L806 13.77 18.36 22.95 3 TONNE 3M L833 14.58 19.44 24.30 3 TONNE 6M L699 14.16 18.88 23.60 5 TONNE 2M L808 17.13 22.84 28.55 5 TONNE 3M L817 18.87 25.16 31.45 5 TONNE 4M L835 20.58 27.44 34.30 5 TONNE 6M NOTE: MANY OTHER CAPACITIES & LENGTHS AVAILABLE L572 6.03 8.04 10.05 1 TONNE 1M L576 6.42 8.56 10.70 1 TONNE 2M L581 6.93 9.24 11.55 1 TONNE 3M L603 13.35 17.80 22.25 1 TONNE 6M L573 6.42 8.56 10.70 2 TONNE 1M L577 8.16 10.88 13.60 2 TONNE 2M L582 10.71 14.28 17.85 2 TONNE 3M L604 15.90 21.20 26.50 2 TONNE 6M L574 8.16 10.88 13.60 3 TONNE 1M L578 11.61 15.48 19.35 3 TONNE 2M L583 14.16 18.88 23.60 3 TONNE 3M L605 22.32 29.76 37.20 3 TONNE 6M L575 9.90 13.20 16.50 5 TONNE 1M L579 13.35 17.80 22.25 5 TONNE 2M L584 16.71 22.28 27.85 5 TONNE 3M L606 27.84 37.12 46.40 5 TONNE 5M NOTE: MANY OTHER CAPACITIES & LENGTHS AVAILABLE All lengths specified are EWL (Effective Working Length). or visit our website at www.brandonhire.co.uk 179

LIFTING HIRE GENERAL LIFTING. WIRE ROPE SLINGS Note: Brandon Lifting stock a range of wire rope slings for most applications, contact your nearest branch. WORKING LOAD LIMIT (WLL) FOR WIRE ROPE SLINGS ROPE DIAMETER* SINGLE LEG MM CAPACITY 5 0.278 6 0.40 8 0.7 9 0.85 10 1.05 11 1.3 13 1.8 16 2.7 20 4.35 *LARGER SIZES AVAILABLE POA ROPE DIAMETER* SINGLE LEG MM CAPACITY 22 5.2 24 6.3 26 7.2 28 8.4 32 11.0 36 14.0 40 17.0 44 21.0 48 25.0 L704 7.26 9.68 12.10 1 TONNE X 3M EWL L712 7.74 10.32 12.90 2 TONNE X 3M EWL L720 7.83 10.44 13.05 3 TONNE X 3M EWL L729 12.84 17.12 21.40 5 TONNE X 3M EWL L738 25.29 33.72 42.15 10 TONNE X 3M EWL L754 45.45 60.60 75.75 20 TONNE X 3M EWL L762 63.81 85.08 106.35 30 TONNE X 3M EWL EWL = EFFECTIVE WORKING LENGTH WIRE ROPE CUTTER A powerful hand device that can make easy work of cutting wire rope up to a diameter of 20mm. LG15 22.74 30.32 37.90 MAXIMUM 20MM DIAMETER STEEL ROPE 180 Find your nearest Branch: 0870 514 3391

MATERIAL LIFTS A range of manually operated material hoists for raising and positioning loads up to 454kg. Ideal for installing air conditioning and heating ducts. Maximum lifting height of manual lift is 25ft. Fork extensions and other accessories available. Extension Platform Boom Modular Pipe Attachhment Pipe Cradle GENIE 1 DAY 2 DAYS 7 DAYS INFO SUMNER 1 DAY 2 DAYS 7 DAYS INFO L338 85.20 113.60 142.00 SLA10 GENIE 454KG UP TO 10FT L339 100.17 133.56 166.95 SLA15 GENIE 363KG UP TO 15FT L341 109.14 145.52 181.90 SLA25 GENIE 295KG UP TO 25FT LA48 14.58 19.44 24.30 FORK EXTENSIONS LE37 14.58 19.44 24.30 PLATFORM LA46 14.58 19.44 24.30 BOOM LC27 14.58 19.44 24.30 PIPE CRADLE Sumner Material Lift LK84 85.20 113.60 142.00 2010 SUMNER 455KG 3.2M LK85 100.17 133.56 166.95 2015 SUMNER 360KG 4.6M LK86 109.14 145.52 181.90 2025 SUMNER 300KG 7.5M LK93 14.58 19.44 24.30 FORK EXTENSIONS LL04 14.58 19.44 24.30 PIPE CRADLE LL05 14.58 19.44 24.30 LIFTING BOOM MAXIMUM 2 MATERIAL HOISTS WHEN USED IN UNISON LIFTING HIRE MATERIAL HANDLING. ELECTRIC STACKER TRUCK Rechargeable Battery Operated Stacker Truck fitted with tiller handle controls, hour meter, battery indicator, display, safety stop button and horn. Powered lift & travel fork dimensions 1150 x 560mm. LM34 closed height 1780mm LM47 closed height 2250mm LM34 243.75 325.00 406.25 CAPACITY 1200KGS LM47 268.76 358.35 447.95 CAPACITY 1200KGS or visit our website at www.brandonhire.co.uk 181

LIFTING HIRE MATERIAL HANDLING. PLASTERBOARD LIFT A simple winch-operated lift for positioning plasterboard and sheet materials up to a height of 3.5m. Storage trolley available. ROUSTABOUT Ideal for erection and positioning of pipe and steelwork. Available in 4.6m and 7.6m H.O.L. Moves vertically and horizontally SACK TRUCKS Eases most manual handling tasks. GENIE CO 2 SUPERHOIST Lightweight portable hoist, powered by CO 2 gas, sets up in seconds and operated by pendant control to activate up and down functions. CO 2 cylinders charged extra. Closed height: 1.37m Platform length: 48 x 61cm Load capacity: 113kg Lifting height: 5.6m Weight: 31kg 0879 52.68 70.24 87.80 70KG 3.5M LD14 90.81 121.08 151.35 CAPACITY 113KG PANEL GRIPS Excellent for the transportation of window panes, metal and steel materials, stone slabs, wood and ply sheets and laminates. Maximum weight per pair: 200kg LC82 126.78 169.04 211.30 WLL 680KG 4.5M LC83 135.75 181.00 226.25 WLL 680KG 7.6M L543 12.84 17.12 21.40 SACK TRUCK 0939 13.77 18.36 22.95 3 WAY SACK TRUCK L544 18.45 24.60 30.75 STAIR CLIMBER LL79 13.38 17.84 22.30 PANEL GRIPS 182 Find your nearest Branch: 0870 514 3391

COMPACT LIFTS Compact material hoist will fit in most estate cars and commercial vehicles. SWL: 250kg Maximum lifting height: 3.5m LC55 77.55 103.40 129.25 250KG CAPACITY LD87 14.58 19.44 24.30 EXTENSION FORKS NOTE: MAXIMUM 2 MATERIAL HOISTS WHEN USED IN UNISON BEAM LIFTER Ideal for lifting and lowering beams, ductwork and piping, can be used individually or in a pair. Units stackable for easy transportation Lifting height: 1.1 to 3.0m Weight: 86kg BOARD TROLLEYS For easy transport of plasterboards, timber and other sheet materials. 0967 21.42 28.56 35.70 2-WHEELED 0953 43.32 57.76 72.20 4-WHEELED SITE TROLLEYS Moving heavy loads in tight places is what this trolley is all about. The pivoting front wheels and generous handle make it easy to use. 1000kg solid/pneumatic tyres 2000kg solid tyres LIFTING HIRE MATERIAL HANDLING. LH48 64.71 86.28 107.85 600KG CAPACITY BEAM LIFTER L440 28.32 37.76 47.20 1000KG LH29 39.45 52.60 65.75 2000KG or visit our website at www.brandonhire.co.uk 183

LIFTING HIRE MATERIAL HANDLING. PALLET TRUCKS For moving palleted goods quickly and efficiently around site in any industry. Various types available to suit your needs Special sizes also available - contact your local lifting branch for details. SEE PAGE 199 FOR ROUGH TERRAIN VERSION LB75 36.39 48.52 60.65 2.5 TONNE STANDARD LB98 76.62 102.16 127.70 1 TONNE HIGH LIFT LD69 128.40 171.20 214.00 PALLET TRUCK C/W SCALES POWERED STAIR CLIMBER A battery operated truck with triple wheels or caterpillar track. Capacity: up to 310kg Modern and lightweight Fast climbing speed L878 154.11 205.48 256.85 WHEELED LI66 154.11 205.48 256.85 CATERPILLAR 150KG SKOOTS Capacity: 2 tonnes per pair Straps bind unit to load Operates where forklifts cannot go Turns 360 within its own length Precision hydraulic lift LA09 59.85 79.80 99.75 2 TONNE PAIR NOTE: INDIVIDUALLY PRICED BUT USED IN PAIRS ELECTRIC PALLET TRUCK 2000kg capacity rechargeable battery operated Pallet Truck fitted with ergonomic handle, hour meter & battery indicator display, safety button & horn Powered lift & travel fork dimensions: 1150 x 550mm o/a 1715 x716mm. PALLET SKATE Turns pallet into manoeuvrable trolley. Swivel castors Dimensions 1200 x 1010mm Capacity 1200kg LM16 181.08 241.44 301.80 2000KG LK41 10.71 14.28 17.85 500KG 184 Find your nearest Branch: 0870 514 3391

SCISSOR TABLES Foot operated pump Variable working height Various platform sizes available FORK LIFT JIB GAS BOTTLE CARRIER FORK TRUCK ATTACHMENTS LB03 55.23 73.64 92.05 250KG LB44 72.36 96.48 120.60 450KG LG07 72.36 96.48 120.60 500KG LF78 154.11 205.48 256.85 1000KG Extendable jib allows the movement of awkward loads from inaccessible locations. Adjustable from 1 3m load centres Gives up to 9 lifting positions Capacity decreases with extension A safe mode of transporting gas bottles on site. Can be used with forklift or crane 4 and 6 bottle type available LD30 48.39 64.52 80.65 4/6 BOTTLE CAPACITY LD23 29.97 39.96 49.95 FORK TRUCK EXTENSIONS L868 53.52 71.36 89.20 HOOK ATTACHMENT FORK LIFT TIPPING SKIPS Ideal for removing waste away from work area using fork truck Converts forks into a single lifting point LIFTING HIRE MATERIAL HANDLING. LG84 70.23 93.64 117.05 MAXIMUM CAPACITY 3000KG LL57 70.23 93.64 117.05 FIXED 3000KG LI58 68.97 91.96 114.95 LOW PROFILE 4000KG LH02 50.97 67.96 84.95 400 LTR LE16 50.97 67.96 84.95 500 LTR LF97 66.36 88.48 110.60 1000 LTR LF07 66.36 88.48 110.60 1200 LTR LH20 72.36 96.48 120.60 1500 LTR NOTE: PLEASE ADVISE CAPACITY or visit our website at www.brandonhire.co.uk 185

LIFTING HIRE MATERIAL HANDLING. FURNITURE MOVER Ideal for moving/ transporting heavy furniture. LA97 63.81 85.08 106.35 1,800KG PAIR MOBILE PIPE RACK Perfect for transporting and storing all types of pipework while on-site. Save time by keeping pipework closer to the work area. Lockable castors Stackable Minimum 1 week hire PLATE CLAMPS Universal and horizontal plate clamps supplied from 500kg to 10 tonnes The universal type of clamp can lift and turn over plates in one smooth operation Horizontal clamps supplied in pairs Other types of clamps are available, please contact your local branch Horizontal Clamp used in pairs UNIVERSAL CLAMP LE97 20.19 26.92 33.65 500KG L546 23.55 31.40 39.25 1 TONNE LB10 23.55 31.40 39.25 1.5 TONNE L547 27.00 36.00 45.00 2 TONNE L548 31.71 42.28 52.85 3 TONNE L549 45.45 60.60 75.75 6 TONNE HORIZONTAL CLAMP (PRICE PER PAIR) LB25 23.55 31.40 39.25 1.5 TONNE L550 23.55 31.40 39.25 2 TONNE LA77 27.00 36.00 45.00 4 TONNE PIPE TROLLEY A pipe trolley designed to carry various pipes up to 6m long over rough ground. Supplied with either solid rubber or pneumatic tyres CODE 7 DAYS INFO 09AE 87.95 PIPE RACK L441 18.45 24.60 30.75 CAPACITY 450KG 186 Find your nearest Branch: 0870 514 3391

PETROL VACUUM LIFTER Powered by a petrol engine this vacuum lifting machine is designed to be used whilst suspended from the bucket linkage of any suitably equipped excavator or digger (check vehicle capacity before use). Fitted with a standard vacuum head, the lifter can handle various types of kerb including the Bus Stop kerbs. Interchangeable heads are available, for handling slabs, granite blocks, beany blocks and ACO standard drainage channels. Capacity: 350kg when used with adjustable head STONE MAGNET MOBILE TROLLEY STONE MAGNET VACUUM LIFTER WHEELED TROLLEY Turns standard Probst 2 man VPH Vacuum Lifter into a single operator trolley reducing manual handling issues and improving productivity. LG01 155.01 206.68 258.35 PETROL VARIOUS LIFTING HEADS AVAILABLE Mobile trolley for use with Stone Magnet (LG28 - see opposite). Easy to integrate Stone Magnet with suction plates easily interchangeable between Stone Magnet & Trolley - no parts required. For use with excavator, forklift and telehandler (check vehicle capacity before use). For safe, fast and precise laying of various slabs, paving stones and kerbs. Capacity: 200 or 400kg LM11 28.83 38.44 48.05 WHEELED TROLLEY FOR USE WITH LD60 SEE BELOW BATTERY POWERED VACUUM LIFTER This battery powered vacuum-lifting machine can be used by two people (where lifting regulations permit), by one man with the special wheeled unit or in conjunction with a small excavator and is ideal for smaller tasks or reinstatement work. Maximum lift capacity: 150kg Various types of lifting heads available LIFTING HIRE MATERIAL HANDLING. LM38 99.49 132.65 165.85 CAPACITY 200KG LG28 85.20 113.60 142.00 BATTERY VARIOUS LIFTING HEADS AVAILABLE LD60 63.81 85.08 106.35 BATTERY LI40 63.81 85.08 106.35 SIDE LIFT or visit our website at www.brandonhire.co.uk 187

LIFTING HIRE MOVING AND WINCHING. SNATCH BLOCKS Available with a hook or shackle fitting L485 11.22 14.96 18.70 2 TONNE (HEAD LOAD) LA38 18.45 24.60 30.75 4 TONNE (HEAD LOAD) L488 36.00 48.00 60.00 8 TONNE (HEAD LOAD) OTHER CAPACITIES AVAILABLE ON REQUEST HYDRAULIC WINCHES Power operated TU 16H (1,600kg) or TU32 H (3,200kg) each fitted with a self reciprocating hydraulic ram ROPE WINCHES Our range of rope winches are ideal for lifting, pulling and tensioning. No limit to rope length Increase capacity using multiple sheave blocks Various rope lengths available L660 26.19 34.92 43.65 800KG W/R WINCH L664 13.77 18.36 22.95 800KG 20M ROPE L665 18.45 24.60 30.75 800KG 30M ROPE L661 32.61 43.48 54.35 1,600KG W/R WINCH L671 15.48 20.64 25.80 1,600KG 20M ROPE L672 22.74 30.32 37.90 1,600KG 30M ROPE L674 40.26 53.68 67.10 1,600KG 50M ROPE L662 40.26 53.68 67.10 3,200KG W/R WINCH L678 18.45 24.60 30.75 3,200KG 20M ROPE L679 27.00 36.00 45.00 3,200KG 30M ROPE L681 45.45 60.60 75.75 3,200KG 50M ROPE PETROL AND ELECTRIC POWER PACKS Supplied in petrol and 415v (3 phase) Various reservoir capacities Output flow rate: 0.2 3 ltr/per min Maximum pressure: 700 bar Hoses to suit L685 131.04 174.72 218.40 3,200KG WINCH/RAM L678 18.45 24.60 30.75 3,200KG 20M ROPE L679 27.00 36.00 45.00 3,200KG 30M ROPE L681 45.45 60.60 75.75 3,200KG 50M ROPE L686 140.82 187.76 234.70 PETROL 1-WAY L687 145.11 193.48 241.85 PETROL 2-WAY L688 111.78 149.04 186.30 ELECTRIC 3 PHASE 188 Find your nearest Branch: 0870 514 3391

CABLE DRUM JACKS AND SPINDLES Available in 3, 6 and 8t screw type Spindle to suit 10 and 20t rack and pinnion available Easy to use adjustable jacks for drum lifting LF99 17.79 23.72 29.65 3 TONNE L443 24.21 32.28 40.35 6 TONNE L444 29.34 39.12 48.90 8 TONNE LL15 72.78 97.04 121.30 10 TONNE RACK & PINNION TYPE LL61 94.68 126.24 157.80 20 TONNE RACK & PINNION TYPE L447 12.84 17.12 21.40 SPINDLES INDIVIDUALLY PRICED BUT USED IN PAIRS CABLE REEL TROLLEY SMALL Transports and reels small cable drum/reels, secured by unique locking spindle. Capacity: 115kgs LL44 37.28 49.71 62.14 REEL TROLLEY SMALL CABLE DRUM ROTATOR A simple solution for dispensing rope and cable from a drum. Can be used for internal and external cabling jobs Heavy duty type used in pairs LH43 45.45 60.60 75.75 ROTATOR 1500KG LIFTING HIRE MOVING AND WINCHING. CABLE REEL TROLLEY LARGE Transports and reels cable drums up to 635mm wide 1 metre diameter. Drums secured in place by positive locking arms. Capacity: 160kgs CABLE ROLLERS An excellent solution for guiding and protecting cables Light and easy to use Please specify standard or corner type LL55 40.75 54.33 67.91 MAXIMUM DIAMETER 1M L080/L448 4.29 5.72 7.15 STANDARD LH81 13.77 18.36 22.95 CORNER or visit our website at www.brandonhire.co.uk 189

LIFTING HIRE MOVING AND WINCHING. CABLE PULLING WINCH A portable dual capstan winch suitable for large pulling applications. Foot controlled Winch fitted with overlead protection Speed Large capstan: 4m/min Small capstan: 2.5m/min LM09 262.80 350.40 438.00 110V CAPSTAN 1500 2500KG COMPACT WIRE HOIST Lightweight and compact for easy handling and installation. 360 self latching swivel hook Complete with 10m pendant control Weight: 26kg SWL: 230kg 25m MINIFOR HOISTS This versatile wire rope hoist is available up to 500kg capacity, with various lengths of rope to suit your requirements. Radio controlled units available. LM03 117.72 156.96 196.20 300KG R/CONTROL L533 90.39 120.52 150.65 300KG PENDANT LM05 159.27 212.36 265.45 500KG R/CONTROL LB06 122.49 163.32 204.15 500KG PENDANT LM30 14.58 19.44 24.30 30M MINIFOR ROPE LM40 22.74 30.32 37.90 40M MINIFOR ROPE LM50 27.00 36.00 45.00 50M MINIFOR ROPE LM80 31.71 42.28 52.85 80M MINIFOR ROPE LM01 45.45 60.60 75.75 100M MINIFOR ROPE LM08 19.77 26.36 32.95 REMOTE CONTROL BATTERY WINCH A variable speed battery winch, 450kg capacity with 4.5m length of wire. LED load indicator Complete with two batteries LK28 84.77 113.04 141.40 110V LL65 45.26 60.35 75.45 RECHARGEABLE BATTERY 190 Find your nearest Branch: 0870 514 3391

MOVING SKATES NYLON SKATES Polymer composite load wheels (limits floor damage) Easy steer ball bearing turntable Multiple wheels for even weight distribution A set comprises: 1x turntable skate, 2x trailing skates Now available up to 100 tonnes Can be hired separately CATERPILLAR SKATES Capacities up to 50 tonnes per set Individual high load skates available ROLLER CROW BAR Solid construction Sealed roller bearings Steel or nylon rollers Entry tip: 5mm CATERPILLAR L449 43.71 58.28 72.85 15 TONNE PER SET L975 43.71 58.28 72.85 20 TONNE PER SET L450 68.07 90.76 113.45 40 TONNE PER SET LB26 68.07 90.76 113.45 50 TONNE PER SET PRICES FOR SET OF 4. CAPACITY FOR SET OF 4. L454 5.19 6.92 8.65 TURNTABLE FOR 15 TONNE SET L976 3.87 5.16 6.45 TURNTABLE FOR 20 TONNE SET L458 3.87 5.16 6.45 EQUALISER FOR 15 TONNE SET L977 3.57 4.76 5.95 EQUALISER FOR 20 TONNE SET L455 6.93 9.24 11.55 TURNTABLE FOR 40/50 TONNE SET L459 4.29 5.72 7.15 EQUALISER FOR 40/50 TONNE SET NYLON LC05 32.61 43.48 54.35 4 TONNE STEERING SKATE LC04 18.45 24.60 30.75 2 TONNE TRAILING SKATE L472 53.10 70.80 88.50 8 TONNE STEERING SKATE LC06 26.19 34.92 43.65 4 TONNE TRAILING SKATE L978 55.23 73.64 92.05 10 TONNE STEERING SKATE LC03 31.71 42.28 52.85 10 TONNE TRAILING SKATE LA83 27.00 36.00 45.00 5 TONNE TRAILING SKATE L470 60.42 80.56 100.70 15 TONNE STEERING SKATE L471 28.32 37.76 47.20 7.5 TONNE TRAILING SKATE LL72 78.21 104.28 130.35 20 TONNE STEERING SKATE LL12 224.70 299.60 374.50 50 TONNE STEERING SKATE LL13 112.38 149.84 187.30 25 TONNE TRAILING SKATE GIN WHEEL AND SECURE PULLEY A way of performing lightweight, one-man lifting operations. Secure pulley has built-in automatic brake suitable for 18/20mm rope Maximum cap: 50kg Gin wheel cap: 250kg Fits to a standard scaffolding LIFTING HIRE MOVING AND WINCHING. L542 9.06 12.08 15.10 ROLLER CROW BAR L490 13.77 18.36 22.95 GIN WHEEL 250KG 0978 14.81 19.76 24.70 SECURE PULLEY 50KG LE83 18.45 24.60 30.75 20M ROPE or visit our website at www.brandonhire.co.uk 191

LIFTING HIRE CRANE AND SITE. SCAFFOLD HOIST Safe working load: 200kg Maximum lift: 25m Hoist speed: 19m/min Weight: 42kg Pendant control Radio control option SCAFFOLD HOIST ACCESSORIES Scaffold Hoist Prop Conversion Ballest required Hoist Skip Bucket Carrier LG99 16.29 21.72 27.15 BUCKET CARRIER LB29 21.90 29.20 36.50 HOIST SKIP L003 9.90 13.20 16.50 BARROW CHAIN LI24 53.10 70.80 88.50 PROP CONVERSION LD21 23.55 31.40 39.25 BRICK BASKET LM08 19.77 26.36 32.95 REMOTE CONTROL LIFTABLE/CRANEABLE WHEELBARROW Galvanised frame, hardwearing polypropylene tray and anti puncture tyre (350x8) 200kg/100ltr capacity No need for wheelbarrow chains L634 95.49 127.32 159.15 110V LM86 21.09 28.12 35.15 200KG CAPACITY 192 Find your nearest Branch: 0870 514 3391

PRECAST CONCRETE GRAB Suitable for handling heavy prefabricated concrete components due to high gripping force. Complete with auto release. PIPE GRAB Designed for laying sewer pipes. With wide gripper arms to ensure coated pipes are not damaged during installation. Can be used in narrow or restricted trenches due to grab profile. CRANE FORKS For moving of palletised goods by crane. LH91 72.36 96.48 120.60 1500KG 0 775MM LK02 81.84 109.12 136.40 4000KG 110 840MM LH14 226.02 301.36 376.70 1.5 TONNE 300 800MM LH23 226.02 301.36 376.70 1.5 TONNE 200 800MM L329 90.81 121.08 151.35 1000 AND 2000KG LA91 13.77 18.36 22.95 PROTECTION NET LIFTING HIRE CRANE AND SITE. BLOCK GRAB Designed to lift a full pallet of blocks with automatic release mechanism. PIPE SUSPENSION CLAMP Supplied with 3-leg sling Clamp opening: 40 120mm L022 80.94 107.92 134.90 WLL 1500KG LF14 80.94 107.92 134.90 1,800KG LA88 13.77 18.36 22.95 SAFETY NET LG41 38.13 50.84 63.55 FORK TRUCK YOKE L980 70.62 94.16 117.70 1500KG or visit our website at www.brandonhire.co.uk 193

LIFTING HIRE CRANE AND SITE. KERB GRAB BLOCK CART BOARD LIFTER Suitable to lift a variety of kerbs. Adjustable 50 570mm Auto release Use with suitable lifting device LB31 45.45 60.60 75.75 500KG CAPACITY Safe and easy transportation of pavers, kerb stones and slabs. Can be loaded from the pallet. Loads are clamped into place. LE82 55.23 73.64 92.05 400KG CAPACITY Specially designed to handle board materials. Allows loads to be lifted horizontally or vertically. Improves loading/ unloading times. CODE 1 DAY 2 DAYS 7 DAYS LH99 110.46 147.28 184.10 INFO 1,800KG CONCRETE SLAB LIFTING CLAMP Suitable for handling heavy prefabricated concrete components due to high gripping force. Complete with auto release. MANUAL KERB AND SLAB LIFTER Kerb and slab lifter for manual handling of kerbs and slabs. Adjustable Fitted with lifting eye VACUUM HANDY Economical manual Vacuum Lifter for installing non-porous slabs. One man operation with 25Kg carrying capacity or two man operation with easy to attach two man handle rated at 50Kg carrying capacity. Suction released by opening simple valve. CODE 1 DAY 2 DAYS 7 DAYS INFO CODE 1 DAY 2 DAYS 7 DAYS LB35 145.11 193.48 241.85 INFO 1000KG LB76 21.90 29.20 36.50 200KG CAPACITY 0 TO 550MM LE17 21.90 29.20 36.50 100KG CAPACITY 485 TO 1020MM LL70 51.44 68.60 85.75 200KG CAPACITY 910 TO 1090MM LM36 23.58 31.44 39.30 VACUUM HANDY MANUAL LIFT 194 Find your nearest Branch: 0870 514 3391

DUAL PURPOSE MAN BASKET Maximum of 2 persons with tools. Can be used with either fork lift or crane. Fitted with side entry gate and tool tray. Harness and lanyard must be used with this equipment (see page 209) ROUGH TERRAIN PALLET TRUCK For the easy moving of palleted goods around construction sites. Adjustable LD06 72.36 96.48 120.60 ROUGH TERRAIN 1500KG PILING CLAMPS Quick release mechanism for easy pitching of piling sheets. LIFTING HIRE CRANE AND SITE. LE21 50.13 66.84 83.55 2 TONNE SKIP LIFTING ASSEMBLY Designed for lifting standard size skips with a WLL of 11.2 tonnes. LB61 78.36 104.48 130.60 2 MAN LM32 68.72 91.63 114.55 1 MAN LA72 89.49 119.32 149.15 SKIP LIFTING ASSEMBLY or visit our website at www.brandonhire.co.uk 195

LIFTING HIRE CRANE AND SITE. COUNTERBALANCED FLOOR CRANES Highly manoeuvrable with adjustable three position jib. LI39 54.00 72.00 90.00 150KG L205 59.52 79.36 99.20 500KG BALLAST CAN BE SUPPLIED AT EXTRA COST FLOOR/ENGINE CRANES A variety of floor cranes are available including fixed frame and folding models with adjustable jib. L201 43.71 58.28 72.85 500KG L203 62.07 82.76 103.45 1 TONNE L204 101.91 135.88 169.85 2 TONNE BIG BAG LIFTING BEAM 1500 Kg Cruciform lifting beam complete with 4 pick up points. Specifically for use in lifting and moving big bags. * For use with overhead crane or can be used with forklift - in conjuction with fork truck attachment (see page 189) Needs Bag ROOF SHEET SPREADER BEAMS Lightweight lattice type 3m sections WLL: 3 tonnes LM52 73.38 97.84 122.30 1500 KG (880-1050 MM WIDTH) L499 308.19 410.92 513.65 UP TO 24M LSB3 408.91 545.21 685.55 UP TO 24M LATTICE* *CAN BE USED UP TO 32M AT REDUCED CAPACITY 196 Find your nearest Branch: 0870 514 3391

MODULAR SPREADER BEAM CHARTS MODULAR SPREADER BEAMS Our range of modular spreader beams come in easy to bolt together sections. WLL of 20, 30, 100 and 150 tonnes* 30 tonnes 100 tonnes 150 tonnes LIFTING HIRE CRANE AND SITE. SP02 POA POA POA WLL 20 TONNE* SP03 POA POA POA WLL 30 TONNE* SP10 POA POA POA WLL 100 TONNE* SP15 POA POA POA WLL 150 TONNE* *WLL REDUCES WITH BEAM LENGTH, SEE CHART ABOVE LIFTING BEAMS Single point top attachment Double pick-up points Useful in low headroom situations LG71 POA POA POA 2 TONNE LG82 POA POA POA 3 TONNE L993 POA POA POA 5 TONNE L994 POA POA POA 10 TONNE or visit our website at www.brandonhire.co.uk 197

LIFTING HIRE CRANE AND SITE. MODULIFT SPREADER BEAM Safe Working Load / tonnes @ 45º base sling angle 100 90 MOD 70H 80 70 60 MOD 70 50 MOD 50 40 30 MOD 34 20 MOD 24 10 MOD 12 MOD 6 1 1 2 3 4 5 6 7 8 9 10 11 12 Span (metres) SP24 POA POA POA WLL 24 TONNE SP34 POA POA POA WLL 34 TONNE SP70 POA POA POA WLL 100 TONNE WLL REDUCES WITH BEAM LENGTH, SEE CHART ABOVE 198 Find your nearest Branch: 0870 514 3391

SITE STAIRWAY Portable Temporary Stairway Especially suitable for building/construction sites and on slopes/embankments. Stairway sections easily joined together Stairway fitted with handrails and locking mechanism Longer stairways supported with combibeam Maximum 2 person may use stairway at same time Collapsible sections for easy transportation Minimum hire period applies PRICE ON APPLICATION Please contact our one call desk on 0161 872 6834 for details. LIFTING HIRE CRANE AND SITE. CODE COMBI SAFE SITE STAIRWAY LK47 LK48 LK49 LK50 LK51 LK52 LK53 LK63 LK64 INFO STAIRWAY 3 STEP STAIRWAY 6 STEP STAIRWAY 9 STEP STAIRWAY 12 STEP STAIRWAY UNIVERSAL SUPPORT STAIRWAY SLAB ATTACHMENT STAIRWAY SCAFFOLD ATTACHMENT COMBIBEAM SECTION Y12 COMBIBEAM SECTION Y6 or visit our website at www.brandonhire.co.uk 199

LIFTING HIRE CRANE AND SITE. COLUMN SKIPS Concrete skip for columns and walls. Geared gate for controlled pour, particularly on columns. Minimum 1 week hire CODE 7 DAYS INFO LF01 84.95 500 LTR LE01 106.35 1000 LTR LI55 132.00 1500 LTR DISCHARGE HOSES ARE CHARGEABLE CIRCULAR MUCK SKIPS L895 45.00 UP TO 1000 LTR LK91 89.20 UP TO 2000 LTR CONE FLOW SKIPS General purpose concrete skip lever or geared gate for controlled pour. Minimum 1 week hire CODE 7 DAYS INFO CODE 7 DAYS INFO LD05 84.95 500 LTR LD22 106.35 1000 LTR MORTAR SKIPS BOAT SKIPS GEARED ROLLOVER SKIPS Steel or plastic mortar tubs with either sling or forklift points. Minimum 1 week hire Perfect for removing site spoil and rubbish. Easily emptied by disengaging locking mechanism. Minimum 1 week hire Our range of boat skips are designed to enable the crane operator to control the discharge of the skip. Minimum 1 week hire Ideal for large volume concrete pours on walls and general applications with a geared gate for controlled pour. Available from 500 to 1000 litre capacities. Fork lift truck option and other sizes available Minimum 1 week hire CODE 7 DAYS INFO LC80 47.20 STEEL 360 LTR LD12 35.00 POLY 250 LTR CODE 7 DAYS INFO LD82 75.75 500 LTR LC88 89.20 1000 LTR LD85 103.45 1500 LTR LH11 123.45 2000 LTR CODE 7 DAYS INFO LH54 102.75 600 LTR LE62 106.35 1000 LTR 200 Find your nearest Branch: 0870 514 3391

HYDRAULIC JACKS Standard and claw base jacks Claw rating is 40% of jack capacity Lever operated CODE 1 DAY 2 DAYS 7 DAYS L418 24.45 32.60 40.75 20T STANDARD BASE L419 42.81 57.08 71.35 20T CLAW BASE L422 41.16 54.88 68.60 30T STANDARD BASE L423 48.39 64.52 80.65 30T CLAW BASE L432 55.23 73.64 92.05 60T STANDARD BASE L433 82.65 110.20 137.75 60T CLAW BASE CABIN (HIGH LIFT) JACK Safety shear pin protects against overloading 19mm lift with each handle stroke Load is supported when activated in either direction Lever operated INFO HYDRAULIC TOE JACKS Can lift using head or toe Low toe height Lever operated L414/37 25.29 33.72 42.15 5 TONNE LE76 33.42 44.56 55.70 10 TONNE LL89 25.29 33.72 42.15 SWIVEL TOE 5 TONNE TROLLEY JACKS Portable trolley jack for jacking vehicles or machinery. Lever operated RACHET TOE JACKS All purpose jacks for lifting and lowering Can lift using head or toe Lever operated L435 20.19 26.92 33.65 5 TONNE L436 27.00 36.00 45.00 10 TONNE BOTTLE JACKS Various capacities available up to 50 tonnes Lightweight and portable For commercial use Lever operated LIFTING HIRE JACKING EQUIPMENT. L442 27.00 36.00 45.00 WLL 3.5 TONNE L519 25.29 33.72 42.15 2 TONNE L520 34.26 45.68 57.10 5 TONNE LH05 59.52 79.36 99.20 10 TONNE L416 9.06 12.08 15.10 5 TONNE L417 11.22 14.96 18.70 10 TONNE L797 16.29 21.72 27.15 20 TONNE or visit our website at www.brandonhire.co.uk 201

LIFTING HIRE JACKING EQUIPMENT. HYDRAULIC CYLINDERS STANDARD Capacity: 5 100 tonnes Stroke: 50 200mm LOW HEIGHT Capacity: Up to 100 tonnes Stroke: 6 16mm Ideal for restricted space Used in conjunction with hydraulic pumps See opposite CODE WLL X STROKE 1 DAY 2 DAYS 7 DAYS L135 10 TONNE X 25MM 15.48 20.64 25.80 L136 10 TONNE X 50MM 16.29 21.72 27.15 L137 10 TONNE X 100MM 18.03 24.04 30.05 L145 20 TONNE X 50MM 19.77 26.36 32.95 L146 20 TONNE X 100MM 21.42 28.56 35.70 L147 20 TONNE X 150MM 27.00 36.00 45.00 L154 50 TONNE X 60MM 56.97 75.96 94.95 LC17 50 TONNE X 100MM 62.07 82.76 103.45 LC18 50 TONNE X 150MM 65.55 87.40 109.25 LE40 100 TONNE X 100MM 98.46 131.28 164.10 L159 100 TONNE X 150MM 101.91 135.88 169.85 CODE WLL X STROKE 1 DAY 2 DAYS 7 DAYS L869 5 TONNE X 6MM 13.77 18.36 22.95 L870 10 TONNE X 11MM 18.45 24.60 30.75 L871 20 TONNE X 11MM 20.19 26.92 33.65 L872 30 TONNE X 13MM 34.26 45.68 57.10 L873 50 TONNE X 16MM 40.26 53.68 67.10 L874 75 TONNE X 16MM 62.07 82.76 103.45 L875 100 TONNE X 16MM 77.55 103.40 129.25 LOW PROFILE Capacity: up to 200 tonnes Stroke: 44 50mm Ideal for restricted space CODE WLL X STROKE 1 DAY 2 DAYS 7 DAYS LC09 10 TONNE X 44MM 18.45 24.60 30.75 LC10 20 TONNE X 44MM 21.00 28.00 35.00 LC11 30 TONNE X 44MM 23.55 31.40 39.25 LC12 50 TONNE X 50MM 30.87 41.16 51.45 LC13 100 TONNE X 50MM 72.36 96.48 120.60 LF06 200 TONNE X 50MM 118.20 157.60 197.00 HOLLOW Capacity: up to 100 tonnes Stroke: 41 150mm For use with screws, rods, cables and pullers CODE WLL X STROKE 1 DAY 2 DAYS 7 DAYS LC19 10 TONNE X 41MM 36.00 48.00 60.00 LC21 20 TONNE X 50MM 40.26 53.68 67.10 L113 30 TONNE X 63MM 36.00 48.00 60.00 LC22 50 TONNE X 75MM 51.87 69.16 86.45 L117 100 TONNE X 75MM 70.62 94.16 117.70 DOUBLE ACTING ALSO AVAILABLE BRANDON LIFTING OFFER MANY OTHER TYPES AND SIZES OF HYDRAULIC CYLINDERS, CONTACT YOUR LOCAL BRANCH FOR DETAILS. 202 Find your nearest Branch: 0870 514 3391

HYDRAULIC PUMPS AXLE STANDS HYDRAULIC WEDGES Single and double acting available Manual and powered version Various hose lengths available Supplied with 1.8m hose L552 25.29 33.72 42.15 0.66 LTR SINGLE L553 45.45 60.60 75.75 2 LTR SINGLE L554 47.10 62.80 78.50 3 LTR L556 45.45 60.60 75.75 1 GALLON SINGLE L557 55.23 73.64 92.05 2 GALLON SINGLE L568 118.20 157.60 197.00 110V SINGLE ACTING ACCESSORIES Gauges and calibration certificate available Steel stand, 10t capacity per pair - model AS5000M lowest height 457mm to maximum height 735mm. LM43 15.48 20.64 25.80 10 TON, 475-735MM PULLER KITS Complete kit for the extraction of bearings and gears. Hydraulic operation Standard and floor versions available Pump operated L480 27.00 36.00 45.00 1 TONNE WEDGE* *HYDRAULIC PUMP REQUIRED NUT SPLITTERS Various sizes available Hydraulic operation LIFTING HIRE JACKING EQUIPMENT. L401 9.06 12.08 15.10 2-WAY MANIFOLDS L403 12.84 17.12 21.40 4-WAY MANIFOLDS LH58 16.29 21.72 27.15 6M HOSE LG76 6.93 9.24 11.55 2M HOSE L892 100.17 133.56 166.95 10 TONNE L893 100.17 133.56 166.95 20 TONNE L894 100.17 133.56 166.95 30 TONNE HYDRAULIC PUMP REQUIRED LH24 95.91 127.88 159.85 M20 M33 BOLT L970 95.91 127.88 159.85 UP TO 50MM HYDRAULIC PUMP REQUIRED or visit our website at www.brandonhire.co.uk 203

LIFTING HIRE LOAD MEASURING. TENSILE LOAD LINK Tensile load measuring device, supplied in carrycase complete with shackles. Fully calibrated Battery operated Radio control available L522 72.36 96.48 120.60 5 TONNE L523 126.78 169.04 211.30 10 TONNE L524 145.11 193.48 241.85 20 TONNE L526 244.47 325.96 407.45 50 TONNE L527 356.58 475.44 594.30 100 TONNE BOLT TESTING KIT For testing of anchor points Fully calibrated Ideal for safety eye bolt testing COMPRESSIVE LOAD CELL Fully calibrated Hand held digital readout L528 118.20 157.60 197.00 5 TONNE L529 126.78 169.04 211.30 20 TONNE HAND TEST WEIGHTS Hand test weights suitable for on-site testing work. SLAB AND ROLLER WEIGHTS LG26 27.00 36.00 45.00 ROLLER WEIGHTS 250KG LH84 26.19 34.92 43.65 250KG* *OTHER WEIGHT AVAILABLE TEST WEIGHT TROLLEY Transports up to 4 x 20kg hand test weights safely and easily. CODE 1 DAY 2 DAYS 7 DAYS LG55 126.78 169.04 211.30 INFO 20KN LB82 1.74 2.32 2.90 20KG LH66 34.26 45.68 57.10 STILLAGE LF79 4.29 5.72 7.15 UP TO 4 X 20KG 204 Find your nearest Branch: 0870 514 3391

FALL ARREST HARNESS SINGLE POINT (REAR) Professional harness with rear attachment Designed for all day use Adjustable leg straps Adjustable chest straps Lightweight Easy to fit Conforms to BS EN 361:2002 LB27 26.19 34.92 43.65 SINGLE POINT FALL ARREST HARNESS TWO POINT (FRONT AND REAR) FALL ARREST AND WORK POSITIONING / HARNESS Professional harness front and rear attachments Comfortable to wear Adjustable leg straps Adjustable chest straps Lightweight Easy to fit Conforms to BS EN 361:2002 Professional harness with front, rear and side attachments Designed for all day use Adjustable leg straps Adjustable chest straps Lightweight Easy to fit Conforms to BS EN 361:2002 LB77 27.00 36.00 45.00 WORK POSITIONING ROPE ACCESS HARNESS Full body safety harness Padded support for comfort Fully adjustable Conforms to BS EN 361:2002 SHOCK ABSORBING LANYARD Complete with shock absorber Karabiner or scaffold hook Complies to BS EN 355:2002 Restraint lanyards also available LD34 5.19 6.92 8.65 KARABINER LA57 6.03 8.04 10.05 SCAFFOLD HOOK RETRACTABLE LANYARD Small and lightweight Built in shock absorber Complete with karabiner, or scaffold hook Conforms to BS EN 360 Always check that your attachment point can withstand the forces of a fall (check with your branch for load forces) LIFTING HIRE SAFETY AND ACCESS. L165 45.45 60.60 75.75 COMFORT LM54 45.45 60.60 75.75 SIT LD39 27.00 36.00 45.00 TWO POINT TYPE-EN813 L167 12.03 16.04 20.05 2.25M or visit our website at www.brandonhire.co.uk 205

LIFTING HIRE SAFETY AND ACCESS. COUNTERBALANCED PORTA-DAVIT SYSTEM Lightweight, portable, easy to assemble (no tools necessary) system developed for use where no davit sockets are installed, or, building overhang applications. Counterbalanced system requires 16 x 20kg weights for ballast (see page 204). WLL for man-ride: 120kg 270 overhang with 1m radius and 180 operating arc LL81 74.07 98.76 123.45 120KG LL82 70.62 94.16 117.70 RETRIEVAL WINCH 20M LL83 123.48 164.64 205.80 BASE MAN-RIDING TRIPOD AND WINCH Ideal for access/rescue in confined space Lightweight tripod Telescopic legs Can be used for lifting and lowering personnel Standard 20m winch Rescue harness available (see page 205) Secondary line available Bosuns Chair or Sit type Harness required for work positioning HI-VIS JACKET HARNESS Fully adjustable Available in yellow or orange LL88 27.99 37.32 46.65 2 POINT HARNESS HORIZONTAL SAFETY LINES Temporary fall arrest system Simple to install Horizontal safety lines up to 20m span Always check attachment points for loading prior to use L174 43.71 58.28 72.85 WEBBING LL80 43.71 58.28 72.85 ROPE VERTICAL SAFETY LINES Temporary fall arrest system May also be used as a secondary safety line For use with full body harness LB21 68.07 90.76 113.45 RETRIEVAL WINCH LB22 68.07 90.76 113.45 MAN-RIDING TRIPOD LB20 27.00 36.00 45.00 RESCUE HARNESS L175 25.29 33.72 42.15 10M LG91 28.32 37.76 47.20 30M LA12 33.42 44.56 55.70 50M 206 Find your nearest Branch: 0870 514 3391

ATEX APPROVED TWO WAY RADIO This is an intrinsically safe ATEX two way radio for use in potentially explosive, hazardous environments. Atex specification on request. This is a licensed product and can be used with a Brandon Hire licence. LL07 49.23 65.64 82.05 ATEX EACH ESCAPE KITS This life saving escape kit is designed for emergency evacuation, ie harmful gases. Carry case provided L102 48.39 64.52 80.65 10 MIN L101 52.68 70.24 87.80 15 MIN FRESH AIR KIT Fresh air breathing apparatus supplies wearer with fresh air. Up to 18m hose unassisted (lung power) or up to 54m turbine assisted Basic kit consists of full face mask, c/w twin air hose, 9m hose assy, belt c/w hose connector, strainer c/w anchor pin. Note: Air blower (turbine) required when used with hose over 18m. LK59 38.52 51.36 64.20 BASIC KIT LK60 44.52 59.36 74.20 AIR BLOWER (TURBINE) LK61 5.19 6.92 8.65 9M EXTENSION HOSE LK62 9.48 12.64 15.80 18M EXTENSION HOSE ATEX LIGHTS Designed for use in hazardous areas Rechargeable LIFTING HIRE SAFETY AND ACCESS. GAS DETECTOR The mini-gas portable gas detector is able to monitor and display up to four gases simultaneously. These include oxygen and flammable gases as well as a range of toxic gases such as hydrogen sulphide or carbon monoxide. Detector gives both audible and visual alarm. 1312 118.20 157.60 197.00 RECHARGEABLE BATTERY LL69 69.96 93.28 116.65 SINGLE GAS (OXYGEN) ONLY LG31 33.84 45.12 56.40 HAND LAMP LH17 27.60 36.80 46.00 TORCH LL09 61.26 81.68 102.10 PORTABLE ATEX FLOOD LIGHT LM55 58.86 78.48 98.10 ATEX CORDLESS SMITH LIGHT SEE PAGE 107 FOR MORE DETAILS or visit our website at www.brandonhire.co.uk 207

LIFTING HIRE SAFETY AND ACCESS. FALL ARREST BLOCKS Retractable lanyard Conforms to BS EN 360 Available with up to 30m line Additional 2m wire sling required when using fall arrest block at an angle more than 40 to horizontal Horizontal use lanyard now available L168 36.00 48.00 60.00 6M LB19 39.45 52.60 65.75 12M L170 41.16 54.88 68.60 15M L171 50.97 67.96 84.95 20M LL56 59.52 79.36 99.20 28M LL25 7.59 10.12 12.65 HORIZONTAL LANYARD* L172 59.52 79.36 99.20 30M LI17 6.03 8.04 10.05 HORIZONTAL USE SLING 2M *FOR USE WITH CR200/300 RETRIEVAL BLOCK Retrievable fall arrest device complete with built in winch. Can be used for rescue from a confined space. Comes in easy to assemble kit form. Conforms to BS EN 360 LIFE JACKET A light weight life jacket which is easy to fit. Note: re-arming kit chargeable if inflated LD35 32.61 43.48 54.35 SELF INFLATING ROOF MAN ANCHOR Mobile deadweight anchor (comes in easy to assemble kit form) Roof anchor may be safely used on the following roof surfaces: Single ply membrane, asphalt, steel cladding, concrete, mineral felt and stone chippings LD55 70.62 94.16 117.70 15M LG17 70.62 94.16 117.70 20M LI42 84.39 112.52 140.65 30M L105 89.88 119.84 149.80 TEMPORARY 208 Find your nearest Branch: 0870 514 3391

FORK TRUCK ACCESS PLATFORM Access work platforms provide a safe, stable work area for routine maintenance, stock-taking and order picking. Harness and lanyard recommended and available on request LD67 63.81 85.08 106.35 1 MAN LD25 68.07 90.76 113.45 2 MAN RESCUE STRETCHER CAGE Designed to carry stretchered person and carer Supplied with lifting sling Stretcher available at extra cost WINDOW/DOOR ANCHOR Safety Anchor for use in Door/Window openings 350-1240mm for one person use only with height safety Harness/Lanyard equipment. LM42 18.00 24.00 30.00 ANCHOR PERSONNEL LIFT These highly manoeuvrable electric lifts are battery or 110v operated and can be used for reaching heights up to 9m, carrying 136kg (1 man + hand tools), making them ideal for all types of maintenance work. Harness and lanyard recommended and available on request LIFTING HIRE SAFETY AND ACCESS. LE93 53.52 71.36 89.20 2 MAN MAX LK29 29.58 39.44 49.30 STRETCHER L347 171.72 228.96 286.20 UP TO 30FT or visit our website at www.brandonhire.co.uk 209

LIFTING HIRE SAFETY AND ACCESS. COMBISAFE LOADING SYSTEM A system comprising two units provides protection for two 12m lorry beds if parked each side of unit. A single unit can protect single 6m bed. Each unit comes complete with fall arrest block. Not to be used as make shift crane. EN795 Class B compliant Ballast required 3 tonne per single unit Safety harness must be worn (see page 209) Minimum hire period applies Please contact our one call desk on 0161 872 6834 for details. LL34 POA POA POA LOADING SYSTEM LM81 102.96 137.28 171.60 FALL ARREST FRAME (MAIN BODY ONLY) 210 Find your nearest Branch: 0870 514 3391

SOFT LANDING BAGS The new air cushion fall protection system brings a new perspective of speed, convenience and adaptability to protecting your workforce on site. The inflatable air bags are quick and easy to install and move from site to site. Fire retardant Low environment hazard Minimum hire period applies LIFT SHAFT TOWERS AND LIFT SHAFT PROPS Purpose made for lift shaft installation and maintenance work. Minimum 1 week hire LIFTING HIRE SAFETY AND ACCESS. LD99 POA POA POA 2.5 X 0.55 X 0.55M LK54 POA POA POA 2.15 X 0.75 X 0.75M INFLATED LK44 POA POA POA PETROL LM61 POA POA POA BATTERY CHARGES APPLY FOR IMPLODED BAGS CODE 7 DAYS INFO LS05 75.75 1.2 X 0.8M 2.5M LS04 120.60 1.2 X 0.8M 4.5M LS03 166.95 1.2 X 0.8M 6.5M LS02 211.30 1.2 X 0.8M 8.5M LS01 256.85 1.2 X 0.8M 10.5M LS07 341.05 1.45 X 1.3M 10.5M LF58 23.60 1.5 2.5M STANDARD PROP LH83 27.15 UP TO 4M LONG PROP or visit our website at www.brandonhire.co.uk 211

LIFTING SERVICES. BRANDON LIFTING EQUIPMENT SERVICES With a team of LEEA qualified technicians across the country, Brandon Lifting Hire tests and inspects thousands of pieces of lifting equipment every year at either one of our specialist branches or at our customer s premises. This service provides the customer with total peace of mind in having a fully certified piece of equipment. Other services include: Repairs Servicing Planned maintenance Testing and Re-certification 120 tonne independently calibrated vertical test machines* Nodding Donkey test machines Beam Installation Statutory Inspection of Height Safety Equipment *(centrally located call 0117 982 1446 for details) 212 Find your nearest Branch: 0870 514 3391