TDR900. Hand-held Time Domain Reflectometer/Cable Length Meter TDR900. Hand-held Time Domain Reflectometer/Cable Length Meter



Similar documents
Handheld portable appliance testers

DET3 Contractor Series

DET3 and 4 Contractor Series Earth/Ground Resistance Testers

Advanced Systems Tester 900AST

PAT120, PAT150 and PAT150R Handheld portable appliance testers

TORKEL 820 Battery Load Unit

INSTRUCTION MANUAL. NC-500 NETcat Pro Wiring Tester

TRIPLETT TDR. Cable Fault Finder. Instruction Manual

Multi Media Cable Tester TM-901N/TM-902/TM-903

1587/1577. Insulation Multimeters. Technical Data. Two powerful tools in one.

VOLTAGE/CURRENT CALIBRATOR ISO-TECH ILC-421

DET3 Contractor Series 3-Terminal Earth/Ground Resistance Testers

LOW VOLTAGE TEST LEADS

FRAX 150 Sweep Frequency Response Analyzer

Digital Ground Resistance Tester. Models 4620 & Digital Ground Resistance Tester

Loc-1Tx/Loc-5Tx/Loc-10Tx Data Sheet V3.3

SVPRIBOR ALFA DSL. Users Manual

Fluke 3000 FC Series Test Tools Technical Data

Multi-Function Ground

Dual Laser InfraRed (IR) Thermometer

162 CB CABLE TRACER. Filter Probe & Tone Generator INSTRUCTION MANUAL

1. SAFETY INFORMATION

Instructions A Amp AC/DC Current Probe

ACL 395 Resistivity Meter

Pocket Tach 99 (PT99) Non-Contact Tachometer

EPM3. Phase Sequence and Motor Rotation Tester. Users Manual

5000V Graphical Megohmmeter Model 5070

Hand-held thermometer Model CTH7000

IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODELS:

Terminal and Dimension

Dual Laser InfraRed (IR) Thermometer

Dual Laser InfraRed (IR) Thermometer with Color Alert

OPERATION MANUAL. Pen type, separate electrode SOIL PH METER Model : PH-220S

SOUND LEVEL METER 94405

THERMAL ANEMOMETRY ELECTRONICS, SOFTWARE AND ACCESSORIES

Drayton Digistat +2RF/+3RF

Agilent 4338B Milliohm Meter

Current Monitoring Kit

Stand Alone POTS Fiber Optic System. P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit. Description & Installation

EGSTON Standard E2xFxWx 12W

Mini InfraRed Thermometer with Laser Pointer

FiberBasix 50 Handheld Testers Series comprising the els-50 light source and epm-50 power meter

HVAC Clamp Meter. Users Manual

Dynatel. 965DSP Subscriber Loop Analyzer

Agilent N8973A, N8974A, N8975A NFA Series Noise Figure Analyzers. Data Sheet

9000 Series Accelerometers Specifications

Agilent 4339B/4349B High Resistance Meters

MEGGER Insulation & Low Resistance Tester

LT-82 Stationary IR Transmitter

Dynatel 2273 Advanced Cable and Fault Locator

Model UT33A: OPERATING MANUAL Table of Contents (1)

MAVO-MONITOR / MAVO-SPOT Instrument Set for Contact or Distant Measurements of Luminances

5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual

AUDIO VIDEO INTERCOM SYSTEMS SECURITY & SAFETY AT YOUR FINGER TIPS AUDIO VIDEO INTERCOM SYSTEMS

User Guide. Model Insulation Tester / Megohmmeter

Fluke 3000 FC Series Test Tools Technical Data

Insulation resistance testing. A complete solution for every person.

Everything you need for protection scheme testing

User's Guide. True RMS Industrial Multimeter

ACL 800 MEGOHMMETER OPERATION MANUAL

High Temperature InfraRed Thermometer with Laser Pointer

10 Multimeter. Users Manual

EVlink Electric Vehicle Charging Solutions Powering the Future of Sustainable Mobility

Dual Laser InfraRed (IR) Thermometer

Digital pressure gauge for industrial applications Model DG-10-S, Standard version Model DG-10-E, Enhanced version

AXIS T81B22 DC 30W Midspan

Electronic Control Devices The European Product Catalogue 2007

JNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410

Agilent E363xA Series Programmable DC Power Supplies. Data Sheet

SpO2 PULSE OXYMETER MD-300

T0118 T2118 T3118. Instruction Manual

Safety Information. 2 Safety Information

User Guide. 4 wire Earth Resistance Tester Model GRT300

Mitel DECT Base Stations

Digital Transformer Ratiometer DTR Model 8500

Tape Wound, Split Core and Ebony Current Transformers

AC/DC Current Measurement Systems TCPA300, TCP312A, TCP305A, TCP303, TCPA400, TCP404XL Datasheet

CHARGING STATIONS FOR ELECTRIC VEHICLES QUICK CHARGER

Atomic Alarm Clock Instruction Manual

Agilent U1230 Series Handheld Digital Multimeters (DMMs)

Wireless Indoor/ Outdoor Thermometer

Technical Data Sheet. 3DLevelScanner

MicroScanner 2. Users Manual. Cable Verifier

Cable avoidance reaches a new level

T-BERD 107A. T-Carrier Analyzer

DSM155 Digital LED Light Meter User s Manual DSM155

Light Meter (Foot Candles)

Model UT33B/C/D: OPERATING MANUAL Table of Contents (1)

Dielectric Withstand and Ground Bond Testers For Production Line Safety Agency Compliance Testing

Redundancy Module QUINT-DIODE/40

R60 USB to CAN interface Manual (1.5 EN)

Ultrasound Technologies. PD1v. vascular pocket doppler. Operating Instructions

Ground Resistance Clamp On Tester

12 Volt 30 Amp Digital Solar Charge Controller Installation & Operation Manual

Agilent E6020B FTTx OTDR

UltraFED IIB. 30 MHz Far-End Device

Product Information Sheet UH28CS-12kV Hi Pot Tester

Terminal and Dimension

Transformer-coupled passive transmit path with a fixed insertion loss of approximately 1.0dB.

FIRST STOP SAFETY 1 PAT-IT. Portable Appliance Tester. User Manual. Issue 1.6

Transcription:

Hand-held Time Domain Reflectometer/Cable Full autoranging for measuring the length of power, telephony, CATV and LAN cables, provides distance to an open or short. Extra large, high resolution backlit LCD. Automatic output impedance control of 25, 50, 75, 100, 125 or 150 ohms. User-friendly menu on screen operation. Cable length calibration function. Internal library of 39 standard cable types. DESCRIPTION The Megger is an advanced instrument capable of measuring cable lengths and finding distance to an open or a short using Time Domain Reflectometry. It offers exceptional features and a range capability normally associated with far more expensive instruments. The measurement range spans from 15 feet (5 m) to 10,000 feet (3 km) with a minimum resolution of 20 inches (50 cm). The can be used for any cable consisting of at least two insulated metallic elements, one of which may be the sheath or shield of the cable. The Meter has automatic internal matching networks to allow testing of 25Ω, 50Ω, 75Ω, 100Ω, 125Ω, or 150Ω cables. (These correspond to power, telephony, CATV, and LAN cables.) The Meter can be closely matched to the cable under test using the menu selection keys. The propagation velocity value can be similarly adjusted to match the cable under test; thus ensuring an accurate distance measurement. The other user adjustable setting is changing the distance measurement units (feet or meters). The Meter is housed in a rugged ABS enclosure which is dust and weatherproof to IP 42. The unit also comes with a soft carrying case and an alligator clip adapter. It is powered by 4 AA (NEDA 15A or NR 6) batteries, which are stored in a compartment on the back of the Meter. The batteries are held in a carrier for quick and easy replacement. APPLICATIONS Telephony Installation and Repair technicians desire a portable test set for testing service drops and inside wiring during trouble ticket dispatches. The connects to service drops or inside wiring and determines single or multiple cases of trouble to the customers services. The Meter detects and displays cable issues, which do not meet the provider s facility criteria during the maintenance process. The displays test results including: open, short, voltage detection and distance to fault in feet (meters). A tone generator is also built into the Meter for pair identification and tracing. Construction and Maintenance technicians can benefit greatly from an easy-to-use test set capable of testing OSP cabling systems. The s exceptional measurement range accommodates testing in the subscriber network. Contractors/Installers The fills various applications ranging from cable verification and fault location, panel mapping to cable stock control. The Meter supports either electrical contractors or telecom/datacom contractors. Contractors can verify cable lengths on buried service drops before billing service providers.

Electric Power Street Lighting: To install street lighting, short lengths of cable run from lamppost to lamppost. It is important that joints are accessible as the cable runs underground. The is used initially to ensure there is enough cable on the drum to give a continuous run and then utilized to check the installation is correct. Mining Due to Ex d (Explosion proof) regulations most countries do not allow TDRs down mines, however, as the mine deepens, shafts are dug from the surface and umbilical cables are dropped down. These carry power for the tools and telecommunication needs. Due to the distances involved, these cables especially the telecom, become stretched and are likely to fail. The can easily be justified as a maintenance tool to check cable integrity. Broadcasting Outside broadcasting: Outside broadcast vehicles carry an enormous amount of cables depending on the situation, e.g. sporting events can use ten or more different camera locations. Due to the temporary nature of the installation, cables get damaged and a low cost, simple to read TDR can easily be justified to quickly locate failures. Studio Broadcasting: Cameras in a studio have a trailing group of cables, which are dragged around the floor, as the cameras move. This puts a strain both on the cable and in the joints, as quality of the signal is very important. Aerials: The signals from broadcasting companies are transmitted through aerials and large drops of cable are used due to the height of these aerials. The cables become stretched especially around the joints, giving poor service. Stocktaking A simple application is stocktaking. Any company that purchases reasonable amounts of cable or any company that produces cable needs to know how much they are buying or have on the shelf. Traditional graphic TDRs have had limited success in this area due to cost and waveform interpretations. The provides both simplicity and accuracy. FEATURES CE-Certificated Accurate to 20 inches (50 cm) throughout the entire range Extra-large backlit (ICON type 7 segment) LCD Automatic output impedance control, auto-range, autozero, and auto-sensitivity allows for closely matching to a wide range of cables under test. Only V.O.P (velocity of propagation) settings required. Displays cable length if the cable s V.O.P (velocity of propagation) is known or displays V.O.P (velocity of propagation) if a cable s length is known. 20 internal memory locations store up to 20 custom cable V.O.P settings. Internal library of 39 standard cables allow for quick and easy measurements for industry standard cable types. Tone Generator (oscillating 910 to 1100 Hz; 5 V peak to peak) for cable identification and tracing. Line Voltage Detection: Displays OUCH message and stops operation if line voltage exceeds 6.5 V. Safety Protection (up to 250 V RMS) SPECIFICATIONS Except where otherwise stated, this specification applies at an ambient temper of 68 F (20 C). CABLE LENGTH MEASUREMENTS Range: Depends upon the V.O.P of the cables under test. 12,000 ft (3.7 km)@ V. O. P 99.9 9,800 ft (3.0 km)@ V. O. P 80.0 8,000 ft (2.4 km)@ V. O. P 66.0 6,200 ft (1.9 km)@ V. O. P 50.0 Accuracy* ± 2 % of reading + 20 inch (50 < 300 ft (100 m) ± 2 % of reading > 300 ft (100 m) * This accuracy is effective for Coaxial Cables up to 8,000 feet, Telephony Cables up to 6,000 feet, and Structured Wiring up to 3,000 ft. Resolution: 20 inches (50 cm) V.O.P (Velocity of Propagation): Adjustable from 1.0 % to 99.9 (in 0.1 % step) CABLE LENGTH CALIBRATION FUNCTION Allows you to measure the V.O.P, given as a percentage of the speed of light, of a known cable length. Required minimum length of sample cable: 30 ft (10 m)

NONVOLATILE MEMORY Cable library 39 standard cable types Custom cable 20 custom cable types Auto-Power-Off The Meter is completely turned off after 30 minutes of no activities. Press the POWER button to turn the Meter on again. This feature can be disabled. Display ICON type 7 segment LCD. Backlight stays on for 1 minute when activated. Connector type: BNC Power supply 4 LR6 (AA) type batteries Battery life: Approx. 5,000 tests Safety: Complies with IEC 61010-1 EMC: BS/EN 61326-1 WARRANTY 3 years from date of purchase. Mechanical The meter is designed for use indoors or outdoors. (IP 42) Dimensions 9.25 H x 3.94 W x 1.73 D in. (235 H x 100 W x 44 D mm) Weight Approx. 16 oz (450 g) Environmental Operating temperature 0 F to 140 F (-18 C to 60 C) Storage temperature -4 F to 158 F (-20 C to 70 C) Relative humidity 85% at 95 F (35 C)

ORDERING INFORMATION Item (Qty) Hand-held Time Domain Reflectometer/ Cable Cat. No. Included accessories Alligator clip adapter User manual Soft carrying case UK Archcliffe Road Dover CT17 9EN England T +44 (0) 1304 502101 F +44 (0) 1304 207342 UNITED STATES 4271 Bronze Way Dallas TX75237-1088 USA T 800 723 2861 (USA only) T +1 214 330 3203 F +1 214 337 3038 OTHER TECHNICAL SALES OFFICES Valley Forge USA, Toronto CANADA, Mumbai INDIA, Trappes FRANCE, Sydney AUSTRALIA, Madrid SPAIN and the Kingdom of BAHRAIN. Registered to ISO 9001:2000 Reg no. Q 09290 Registered to ISO 14001 Reg no. EMS 61597 _DS_en_V10 www.megger.com Megger is a registered trademark

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Megger: