CHARGING STATIONS FOR ELECTRIC VEHICLES QUICK CHARGER

Transcription

1 !"!##%!"!# & ( ) * + *, ( (-#(. *, )*/.( 0 - % ) ++ )%++) ( ++1 CHARGING STATIONS FOR ELECTRIC VEHICLES QUICK CHARGER Page 1 / 30 TEQCO597C

2 B. Charging levels and modes Page 4 / 30

3 C. Plugs / Sockets models and applications Page 5 / 30

4 D. About Quick Charge Page 6 / 30

5 This technical document introduces our solution designed for quick charge in charging mode 4 and 3. The DBT Quick Charger is adapted to an indoor or outdoor use (according to the model) and can be set up in any environments: public or private parking, highways Installation design and compliance The QUICK CHARGER complies with all applicable construction and performance standards, regulations and directives for this type of equipment. The equipment can be located indoor or outdoor and complies IP33 (for the indoor version) or IP 55 (for the other versions) requirements of protection for the enclosure. IP55 degree indicates total protection against dust and water splash from all directions. The QUICK CHARGER and its accessories, including all features and installation methods, have been designed to meet following conditions: Each component operates in its environment without causing electromagnetic disturbance meeting or exceeding applicable electromagnetic compatibility regulations. CHAdeMO CHAdeMO (sometimes spelled CHΛdeMO) is the trade name of a quick charging method (charging mode 4) for battery electric vehicles delivering up to 50 kw of highvoltage direct current via a special electrical connector (type 4). It is proposed as a global industry standard by an association of the same name. Page 7 / 30

6 b) Quick Charger Standard DC Version 501NQC002 General overview CHARGING TYPE CHARGING MODES Non-binding picture ACCESS CONTROL & PAYMENT SOLUTIONS PLUG TYPE APPLICATIONS LEGEND Coin machine Key contactor Keypad Interactive Voice Response RFID reader compatible with NFC (Near Field Communication) Credit Card reader SMS plus service Basic Specification Input DC Output Atmospheric Conditions Rated Input Voltage 3 Ø 400V±15% - 50/60Hz Rated Input Capacity 48kW Power factor Over 95% Output voltage range DC50 ~500V Output current range DC0 ~125A Rated output 44kW Ripple 6 A P-P Efficiency Over 90% Dimensions H1840 W380 D665mm Weight Approximately 200kg Dustproof, Rainproof IP55 (Oudoor version) Temperature Standard -10 C ~ 40 C Cold OPT -30 C ~ Altitude 1000m Humidity 30 ~90% RH Lightning protection/ Ground fault detection / Overcurrent protection / Safety function Overvoltage protection / Connector disconnect detection / Emergency stop / Communication error detection / Accept stop command from vehicle Charging Standard CHAdeMO Rev.0.9 Connector and cable Yazaki 7435 CE / Standard version : 4 m Maintenance Periodic inspection Periodic replacement: Charging gun, Fan, Filter Page 12 / 30

7 The QUICK CHARGER is guaranteed to operate correctly in temperate climate conditions, with an ambient temperature between -10 C and +40 C for the standard version (- 30 C with cold option) and maximum humidity of 90%, including for extended periods. Quick Charger Standard DC Version Dimensions Specification / Availability and Delivery terms OUTDOOR Reference Standard DC Version 501NQC002 Emergency Stop button Start / Stop Operating User Interface switches LED Status Monochrome display Color display - Access control RFID - NFC - Payment system RFID - Communication OCPP Communication - Climate & IP Degree IP 55 Environment Cold option Optional Energy meter Optional Cable location Right side Charging connector Type 4 Charging mode Mode 4 Output current range Output voltage range Standard DC Version Cold Option Energy meter Option Concrete basement (excluding transportation expenses) 125A 400V References 501NQC NQC NQC NQC007 Commercial launch First deliveries February 2012 April 2012 Page 13 / 30