COMOS Training Calendar 2015/2016 www.siemens.com/comos Scan this code for further informations.
Offer Whether you re looking for basic knowledge for first-time users or specialist know-how for experts and administrators the Center always offers you the right training for your requirements. Structured, practise-oriented training courses Regardless of whether you work as a COMOS user or administrator, our requirement-oriented COMOS training courses provide substantial support in achieving your learning success. COMOS training cooperation partner WIFI in Austria COMOS Industry Solutions extends the training offer in the region Austria. In order to provide adequate education and trainings for COMOS in Austria, Siemens is cooperating with WIFI Vienna and Upper Austria since 2015. WIFI supports Siemens by providing class rooms and infrastructure and with the administration of trainings. COMOS contents are trained by experienced Siemens staffr. From first-time users to COMOS experts AStarting with the obligatory Platform (Basic), you can expand your capabilities across the entire breadth of the COMOS software, or acquire expert knowhow via our three-stage Administrator Training. Our range of courses with its wide variety of combination options supports you in acquiring comprehensive know-how that can be immediately applied, and in building up sound knowledge of COMOS in theory and practice. Please note, however, that some training courses require prior knowledge of certain topics. You can find the relevant details, as well as the content and duration of courses, in the training descriptions Field-proven standard range, or customized training All courses are held in venues with the most up-to-date equipment at our location in Essen, or on your own premises if desired. Our trainings are done in German and bases on the standard software and database as it is originally delivered. Although German is the standard language for our training courses, it goes without saying that all courses can also be booked in English on request. If you should have further requirements for special content or individual topics, please contact us. 2
Offer 2 Training Calendar October 2015 - March 2016 4 Platform (Basic) 7 FEED 8 P&ID 9 PipeSpec Manager 10 PipeSpec Designer 11 Instrumentation & Control 12 Logical 13 Electrical Engineering 14 Cabinet Layout 15 MRO 16 Walkinside 17 Admin istration I 18 Admin istration II 19 Admin istration III 20 Administration Scripting inside Queries 21 Integrated Engineering with COMOS and SIMATIC PCS 7 22 COMOS Information Administration idb (industrial database) 23 Terms & Conditions 24 NeXeo PLM Training 26 Highlights SITRAIN 27 3
Date Germany Austria 01. Oct. I 02. Oct. 03. Oct. 04. Oct. 05. Oct. Administration I 06. Oct. Administration I 07. Oct. Administration I 08. Oct. 09. Oct. 10. Oct. 11. Oct. 12. Oct. Administration II 13. Oct. Administration II 14. Oct. Electrical Engineering 15. Oct. Electrical Engineering 16. Oct. I 17. Oct. 18. Oct. 19. Oct. Administration III 20. Oct. Platform (Basic) 21. Oct. Platform (Basic) 22. Oct. P&ID 23. Oct. P&ID 24. Oct. 25. Oct. 26. Oct. Administration III Administration III 27. Oct. P&ID 28. Oct. P&ID 29. Oct. 30. Oct. 31. Oct. Date Germany Austria 01. Nov. 02. Nov. 03. Nov. Administration I 04. Nov. Administration I 05. Nov. Administration I 06. Nov. 07. Nov. 08. Nov. 09. Nov. 10. Nov. 11. Nov. 12. Nov. 13. Nov. 14. Nov. 15. Nov. 16. Nov. 17. Nov. 18. Nov. Instrumentation & Control 19. Nov. Instrumentation & Control 20. Nov. 21. Nov. 22. Nov. 23. Nov. Platform (Basic) 24. Nov. Administration I 25. Nov. Administration I 26. Nov. Administration I Platform (Basic) Administration I Administration I 27. Nov. Administration I 28. Nov. 29. Nov. 30. Nov. Administration II Training Calendar Octob Date Germany Austria 01. Dec. Administration II 02. Dec. Administration II Administration II Administration III 03. Dec. Administration III 04. Dec. Administration III 05. Dec. 06. Dec. 07. Dec. 08. Dec. 09. Dec. P&ID 10. Dec. P&ID 11. Dec. 12. Dec. 13. Dec. 14. Dec. Electrical Engineering 15. Dec. Platform (Basic) 16. Dec. Platform (Basic) 17. Dec. Electrical Engineering 18. Dec. Electrical Engineering 19. Dec. 20. Dec. 21. Dec. 22. Dec. 23. Dec. 24. Dec. 25. Dec. 26. Dec. 27. Dec. 28. Dec. 29. Dec. 30. Dec. 31. Dec. Electrical Engineering 4
er 2015 - March 2016 Calendar 2015/2016 Date Germany Austria 01. Jan. 02. Jan. 03. Jan. 04. Jan. 05. Jan. 06. Jan. 07. Jan. 08. Jan. 09. Jan. 10. Jan. 11. Jan. 12. Jan. Date Germany Austria 01. Feb. 02. Feb. 03. Feb. 04. Feb. 05. Feb. 06. Feb. 07. Feb. 08. Feb. Platform (Basic) 09. Feb. FEED 10. Feb. FEED 11. Feb. 12. Feb. Platform (Basic) Date Germany Austria 01. Mar. Administration III 02. Mar. Administration III 03. Mar. 04. Mar. 05. Mar. 06. Mar. 07. Mar. Electrical Engineering 08. Mar. Electrical Engineering 09. Mar. 10. Mar. 11. Mar. 12. Mar. 13. Jan. P&ID 13. Feb. 13. Mar. 14. Jan. P&ID 14. Feb. 14. Mar. Electrical Engineering P&ID 15. Jan. 15. Feb. Platform (Basic) Administration I 15. Mar. Electrical Engineering P&ID 16. Jan. 16. Feb. Platform (Basic) Administration I 16. Mar. Administration III 17. Jan. 17. Feb. Instrumentation & Control Administration I 17. Mar. Administration III 18. Jan. 18. Feb. Instrumentation & Control 18. Mar. Administration III 19. Jan. 19. Feb. Cabinet Layout 19. Mar. 20. Jan. 20. Feb. 20. Mar. 21. Jan. MRO 22. Jan. MRO 23. Jan. 24. Jan. 25. Jan. Administration I 26. Jan. Administration I 27. Jan. Administration I 28. Jan. Administration II 29. Jan. Administration II 30. Jan. 31. Jan. 21. Feb. 22. Feb. Administration II 23. Feb. Administration II 24. Feb. 25. Feb. 26. Feb. 27. Feb. 28. Feb. 29. Feb. Administration III 21. Mar. Platform (Basic) (Linz) 22. Mar. Platform (Basic) (Linz) 23. Mar. 24. Mar. 25. Mar. 26. Mar. 27. Mar. 28. Mar. 29. Mar. 30. Mar. P&ID (Linz) 31. Mar. P&ID (Linz) 5
6
Platform (Basic) Date City 2015 23.11. 24.11. Vienna 15.12. 16.12. Essen 2016 08.02. 09.02. Vienna 15.02. 16.02. Essen 21.03. 22.03. Linz The COMOS Platform (Basic) training is aimed at planning engineers, drafters or future COMOS administrators. Participants learn about the philosophy of COMOS, how to handle the Navigator, and how to create structures and engineering objects. They are also introduced to tools such as queries and bulk processing, and to interfaces and working layers. Planners, drafters, engineers, project team members COMOS-projects and interface Navigator, tabs, COMOS objects Basics for queries Queries and bulk processing Interfaces Working layers Duration: 2 days Windows user knowledge 7
FEED Date City 2016 09.02. 10.02. Essen During the COMOS FEED training, participants learn how to use practice-oriented methods and processes to import simulation data and carry out process front end engineering with all the relevant objects, drawing types and documents in COMOS. Planners, drafters, engineers, project team members Platform (Basic) Block diagram and PFD Import of external data Mapping tables Case management and process data management Mass balancing / tray mapping Knowledge database From simulation to P&ID Copying methods / documents Duration: 2 days 8
P&ID Date City 2015 22.10. 23.10. Essen 2016 13.01. 14.01. Essen 14.03. 15.03. Vienna 30.03. 31.03. Linz During the COMOS P&ID training, participants learn how to use practice-oriented methods and processes to carry out graphical, process engineering planning with all the relevant objects, drawing types and documents in COMOS. Planners, drafters, engineers, project team members Platform (Basic) Creating structures & P&ID Editing objects in the P&ID Pipes Objects for process engineering Measurement functions Revision and redlining Copy methods Further functionalities Duration: 2 days 9
PipeSpec Manager on request The COMOS training PipeSpec Manager imparts the creating and handling of pipe specs (classes) with existing and specified components for pipe runs. Also, the usage of pipe specs in engineering projects will be demonstrated. Primarily, this training is intended for COMOS users. Planners, engineers, project team members VIPER Standardization / standard tables, pipe part catalog Pipe parts Administration of pipe specs Exemplary pipe spec in basic engineering Duration: 1 day Platform (Basic) 10
PipeSpec Designer on request The COMOS training PipeSpec Designer imparts the creating and handling of pipe specs (classes) in COMOS. Participants learn exemplarily all the methods required to create, specify and manage pipe specs and their component parts within the data model in COMOS. Also, the usage of pipe specs in engineering projects will be demonstrated. Planners, engineers, project team members specializing in COMOS administration Administration I VIPER Standardization system Basic tabels and industrial standards Pipe part catalog Pre-configuration of tabs Workflow for a new pipe part catalog Administration of pipe specs Specifying a pipe spec Exemplary pipe spec in basic engineering Bolt sets Exemplary pipe spec in detail engineering Duration: 3 days 11
Instrumentation & Control Date City 2015 18.11. 19.11. Essen 2016 17.02. 18.02. Essen During the COMOS Instrumentation & Control (I&C) training, participants learn to use practice-oriented methods and processes to carry out I&C engineering, create measuring and actuating functions and draft position diagrams using the COMOS El&C module. Planners, drafters, engineers, project team members Platform (Basic) Structure engineering / labeling Positions and functions within I&C engineering Requests / manufacturer devices Position / loop diagram and its automatism Programmable logic controller / connection elements Connecting and marshalling Signal engineering and loop document manager Revisions Duration: 2 days 12
Logical on request This is an advanced training for the experienced users with knowledge gained in the COMOS l&c training. Participants learn how to handle signals, actions, step sequences and function diagrams with the COMOS module Logical. Planners, developers (automation), engineers, project team members Basics Function diagrams Step sequences Further blocks / functionalities Duration: 1 day Instrumentation & Control 13
Electrical Engineering Date City 2015 14.12. 15.12. Vienna 17.12. 18.12. Essen 2016 07.03. 08.03. Vienna 14.03. 15.03. Essen During the COMOS Electrical Engineering (EE) training, participants learn how to use practice-oriented methods and processes to carry out electrical engineering and create circuit diagrams with the COMOS module El&C. Planners, drafters, engineers, project team members Platform (Basic) Structure engineering / labeling system Engineering objects in electrical engineering Properties, attributes, connection of objects Evaluating reports (lists, data sheets) Circuit diagrams (1-5) Connections types / potentials Single line diagrams Revisions, redlining Duration: 2 days 14
Cabinet Layout Date City 2016 19.02. Essen The Cabinet Layout training is intended as an advanced course for experienced users with knowledge gained in the COMOS Electrical Engineering training. Participants learn how to use methods and tools for planning control cabinets with the COMOS module El&C. The focus is on creating and synchronizing views and equipping cabinets and rails. Planners, drafters, design engineers, engineers, project team members Cabinet base objects / cabinet documents / views Cabinet layout / synchronization of views Mounting diagrams / rail editor Cable routing / collision check Duration: 1 day Electrical Engineering 15
MRO Date City 2016 21.01. 22.01. Essen The COMOS MRO (Maintenance, Repair & Overhaul) training is aimed at beginners in the areas Maintenance and Plant operation. Participants learn about the basic functionalities of the COMOS module MRO and will work on different maintenance methods and scenarios. Technicians, engineers, project / maintenance staff Platform (Basic) Übersicht MRO project Planned maintenance Resource management Reactive maintenance Plugin Maintenance Demon Plugin Direct Login MRO settings Duration: 2 days 16
Walkinside on request Actually, no standardized training contents will be offered for this topic.. Training contents, scope and duration will be individually aligned and defined according to customer requirements. 17
Administration I Date City 2015 05.10. 07.10. Vienna 03.11. 05.11. Essen 24.11. 25.11. Essen 25.11. 27.11. Vienna 2016 25.01. 27.01. Essen 15.02. 17.02 Vienna During the COMOS Administration I training, participants acquire the practical knowledge and skills needed by the COMOS administrator to manage and extend the database, base object catalogs, tabs and symbols. Experienced COMOS users, project team members specializing in COMOS administration Platform (Basic) COMOS base project / base objects Unit structure Handling of the context menu Tabs & attribute catalog Handling of attributes Assigning standard tables and tabs Handling of symbols and sub-symbols Copy methods Working layers / further tabs Duration: 3 days 18
Administration II Date City 2015 12.10. 13.10. Vienna 30.11. 01.12. Vienna 01.12. 02.12. Essen 2016 28.01. 29.01. Essen 22.02. 23.02 Vienna During the COMOS Administration II training, participants acquire the practical knowledge and skills required to create, modify and manage individual lists, datasheets and document templates in COMOS. Experienced COMOS users, project team members specializing in COMOS administration Administration I Documents Queries Lists with automatic layout Lists with manual layout Single page / multi page data sheets Dynamic data sheets Interactive reports Duration: 2 days 19
Administration III Date City 2015 19.10. 21.10. Vienna 02.12. 04.12. Vienna 2016 29.02. 02.03. Vienna 16.03. 18.03. Essen During the COMOS Administration Ill training, the experienced COMOS administrators acquire the practical knowledge and skills required to automate, extend and individually adapt objects, documents and processes in COMOS with the help of scripting. Experienced COMOS users, project team members specializing in COMOS administration Administration II & practical programming skills in VB Script Scripting basics COMOS objects / object model Attributes Search methods Collections Object queries in scripts Scripts for symbol design and documents Further functions and hints Duration: 3 days 20
Administration Scripting inside Queries on request During the COMOS Administration Scripting inside Queries training, students acquire the practical knowledge needed to script and automate queries. Besides an introduction to the basics of Visual Basic Script, several scenarios for scripting within queries will be demonstrated with the help of examples. Also, tools and supporting features for the handling of scripts will be explained. Experienced COMOS users, project team members specializing in COMOS administration Scripting basics in COMOS Tools and support for scripting Scripting with COMOS objects Scripting within queries Searching via scripting Duration: 1 day Administration I 21
Integrated Engineering with COMOS and SIMATIC PCS 7 on request During the COMOS Integrated Engineering training, participants gain an insight into process-oriented and objectoriented data exchange between COMOS and the SIMATIC PCS 7 that allows efficient integration of planning and automation processes. Using a training project as an example, participants learn about a typical workflow, especially preparation and administration within the COMOS software. Planners, developers (automation), engineers, project team members Preparing PCS 7 and COMOS Hardware engineering in COMOS Software engineering in COMOS Symbol tables / function engineering / interlock Equipment modules Step sequences Data exchange between COMOS and SIMATIC PCS 7 Duration: 2 days Instrumentation & Control 22
COMOS Information Administration idb (industrial database) on request During this training, participants acquire knowledge about the philosophy, structure and mechanisms within the base object project of the COMOS industrial database (idb). Emphases are the handling of the base objects and the usage of the naming conventions for predefined, as-delivered objects as well as for customized objects. Experienced users (already using COMOS), project team members specializing in COMOS administration Features and benefits of COMOS idb (industrial database) Definitions regarding updateability Basic concepts and new functions Structures of the base project Customizing rules Duration: 2 days Administration I und Administration II 23
Terms & Conditions Registration Please request a training by using the Online Training Portal of Siemens Industry Software GmbH by using the Request form. Applications will be considered in date order of receipt. You will receive the training reservation for your signature. Confirmation of registration Confirmation of registration will be sent after receipt of your signed training reservation. You will receive final confirmation of your place on the training course in writing, including directions, at least two weeks before the start of the course. A training course may be cancelled if the minimum number of participants is not reached 14 days before the start of the course, or if Siemens Industry Software GmbH has other reasons for so doing. en Please read the training descriptions for information on prior experience/knowledge required. This is absolutely essential for participation in the training courses. Cancellation and further details For details about trainings in Germany please refer to the terms and conditions of the training center Essen following the link http://w3.siemens.com/mcms/plant-engineering-software/en/comos-training/documents/trainingcomos-terms-and-conditions.pdf and for trainings in Austria please contact our cooperation partner WIFI directly at www.wifi.at. 24
Calender 2015/2016 Calendar 2015/2016 25
NeXeo PLM Training NeXeo - contracted authorized training partner for Siemens PLM Software products Via NeXeo GmbH, the only contrtacted authorized training partner for Siemens PLM Software products, you receives access to a wide training portfolio for Siemens PLM products NX, Teamcenter und Tecnomatix. With 7 training centers in Germany, we are always close to you or visit locally in your company. Furthermore, we offer as part of a mobile classroom on the provision of laptops with all the necessary licenses, so you can plan training without their own licenses. For dates, course overviews and online registration, please visit our website at www.nexeo.de. Your contact partner: Markus Studer training@nexeo.de Phone: 0800 / 532 99 532 (toll free - German landline) NeXeo GmbH Gruener Deich 15 D-20097 Hamburg Tel: +49 (40) 18 04 66 66-0 Fax: +49 (40) 18 04 66 66-6 26
Highlights SITRAIN Training for Industry Top trainers Our trainers are skilled specialists with direct and extensive practical experience. Course developers have close contact with product development and directly pass on their knowledge to the trainers, and with that at the end to you. Practical experience Practice makes perfect that s why we attach greatest impcityance to hands-on learning. Practical exercises can comprise up to half of the course time. You can therefore immediately implement your new knowledge in your day-to-day work. 300 courses in 62 countries We offer a total of about 300 local attendance courses. You can find us at more than 50 locations in Germany, and in 62 countries worldwide. To find out which course is held at which location, go to: www.siemens.com/sitrain Customized training Would you prefer individual training instead? Our solution: We will provide a program tailored exactly to your personal requirements. Training can be carried out in our Training Centers or onsite at your company. We instruct you using state-of-the-art training equipment which has been especially designed by our developers for the SITRAIN courses. This training approach will give you all the assurance you need. The right mixture: Blended learning Blended learning involves a combination of various training media. For example, a face-to-face course in a training center can be optimally supplemented by teach-yourself Web-based training (WBT) courses as preparation or follow-up. The add-on effect: Reduced traveling costs and periods of absence. 27
With the wide range of training courses to acquire directly applicable, comprehensive know-how and increase your knowledge. COMOS training aimed at first-time users, experienced users and to persons who work in the future in the context of projects with COMOS. In addition, the three-stage training program for COMOS administrators gives you the opportunity to deepen the knowledge and skills. Individual training is offered on request, tailored to your specific needs. Siemens Industry Software GmbH Kruppstr. 16 D-45128 Essen Phone: +49 (0) 221 20802 222 Phone: +49 (0) 201 31937 157 Fax: +49 (0) 201 31937 187 E-mail: training.comos@siemens.com WIFI Vienna Waehringer Guertel 97 A-1180 Vienna Phone: +43 (0) 1 476 77 5555 E-mail: Kundenservice@wifiwien.at WIFI Upper Austria Wiener Street 150 A-4027 Linz Phone: +43 (0)5 70000 77 E-mail: Kundenservice@wifi-ooe.at www.siemens.com/comos Siemens Industry Software GmbH 2015