Name : Ulf Ejnar Nordskog Date of Birth : 25 May 1949 Profession : Quality and HES Manager Languages : English and German CURRICULUM VITAE EDUCATION 1966-1967 : Gjerdes Handelsskole - Commercial School Trading and administration course. 1967-1968 : Drammen Yrkesskole - Apprentice School Mechanical Workshop Course 1969-1971 : Landskrona Stads Technical College, Sweden. Higher National Diploma Structural Engineering and Machinery. EXPERIENCE 2007 : L-3 COMMUNICATIONS VALMARINE AS Quality Assurance: Schedule, execute and follow up internal quality audits. Guide managers in updating their work processes. Keeping the Quality System on Intranet updated. Established processes for quality meetings to improve product quality. Started developing interactive quality processes on Intranet. Started implementation of new management system (Corporate 360) to improve document control and following up of project communication. HSE coordination: Acted as Safety Supervisor. Guided managers through risk analysis of company activities. Planned and followed up updating managers and safety delegates in HSE on interactive Intranet courses. Prepared and implemented chemical data sheets file. Guided in development of Company Crisis Plan. SOX: Coordinating and implementing SOX requirements from the mother company. Implemented SOX requirements into QA work processes. General: Taking active part in establishing new personnel security system in the company. Started activities to meet requirements for Green Pasport. Member of the executive management group. 3-Mar-09: Temporary terminated due to low market activity and order intake. Position: Manager HSE, QA & SOX 2001-2007 : FMC KONGSBERG METERING AS Responsible to monitor and audit the internal quality system and to plan and execute quality and HSE audits at sub-suppliers. Planning and lead internal HSE audits, HSE training and HSE courses. Plan and perform internal periodical SOX-tests. Appointed management representative and safety superviser. Position: Manager for QA, HSE & SOX 1999-2000 : KONGSBERG OFFSHORE AS. 1999 2000 : Kongsberg Offshore AS, Metering systems Employed as Manager for System and Administration Support. Professional responsibility for System Operation department s system- and administration support, including follow up of routines, roles, computer software and planning. In addition developed Internal Rev.: 23/2-2009 Page 1 of 7 h:\web nordskog.no bruk
Guidelines for KOS Metering and made preparation for sertification of FMC Kongsberg Metering AS to ISO 9001. 1989 - : NORSK NETTVERK A/S, Drammen. 1996-1999 : Kongsberg Offshore AS, Metering systems Project planner. Developing planning system and routines for Metering projects, including training the personnel. Project Coordinator for delivery of 20 Allocation Metering systems and 5 Fiscal Metering skids to Kårstø. System: MS Project 1997 : Telenor Bedrift, divisjon for storkunde Comparision av databases and washing the data. Information transfered via Internet. System: MS Excel and MS Access 1996-1997 : Kongsberg Offshore AS, Subsea Control systems Project planner, detail planner and resource planner for various projects delivering subsea control modules. System: AR7000, MS Project, MS Access. 1996 : Aker Verdal AS Varg Well Head Platform EPCI-Project. Baseline revision with total rebuilt of logical network plans of substructure and topside. Approx. 1800 activities. System AR7000 on VAX. 1994-1996 : Norsk Nettverk A/S Design and development of a patient journal program in MS Access and MSADT for use by alternative medicine.. Beta-tester of Win95 as member of Microsoft Developer Network. 1995-1996 : Brown & Root Energy Services AS Software modification of PCS/TDT Total Document Tracking System multi-user on Artemis 7000. System: AR7000 on VAX 1995 : Kværner Subsea Concrete Contracting a.s Assisted in bid preparation of man-hours and cost reports on Åsgard GBS Development to Statoil. System: AR7000 1994-1995 : Babcock/Fjeldstad, Kollsnes, Troll Phase 1 Development of level 5 network schedule for M3 installation contract. Baseline updates, weekly progress reporting and support the discipline groupleaders with various project services. Operating own software and hardware. System: AR7000 1993-1994 : Kværner Rosenberg, Kværner Egersund Bid preparation of network plans Sleipner Vest, Frøy Flare. Heidrun Drilling Module. Base line revision. Maintenance of Current Plan, Forecast Plan and VOR/VO-register. Development of AR7000 application for network evaluation. System: AR6000/AR7000. 1992-1993 : Norwegian Contractors, Rev.: 23/2-2009 Page 2 of 7 h:\web nordskog.no bruk
Heidrun, Tether System Contract. Co-ordination and interface between sub-contractors and the Tether System Contract. System: AR6000/AR7000. 1992 : EPC-tender for Kværner Egersund. 1991-1992 : Statoil, Europipe Development Project (EDP) Establishing network plans at level 3 for the project. Development of various scenaria to analyse need dates. Modified NN055 AR7000 Course Application to meet EDP's needs. Prepared reports and graphs as required. Participated in issue of control plans and evaluation of contract plans. System: Artemis 7000/386. 1990-1991 : Kværner Rosenberg Verft A/S Establishing schedule impact routines on Draugen Deck Project. Preparing network for impact data and creating schedule analysis. In addition acted on engineering activities. Transfer of data between ROMIS (Rosenberg Material & Information System) and AR6000. Artemis 6000. 1991 : NPC, Bergen Development of applic. for analysis and graph. output, communicating with Oracle. Artemis 7000/386. 1991 Studying functionality and programming in AR7000/386. Converted accounting application from AR2000 to AR7000/386. 1990 : Aker Verdal Tender preparation of network and reports of the Draugen Jacket project. Developed AR2000 application for planning and transfer of data to AR6000. Artemis 2000 and Artemis 6000. 1988-1989 : SELF EMPLOYED AS SENIOR CONSULTANT / PLANNER. : Kværner Egersund Planning and reporting on self developed application in Artemis 2000 in connection with tender preparation for: - Snorre deck - Snorre TLP - Sleipner Deck - Sleipner COT - Sleipner M23 - Sleipner M21 - Andøy / Gjemnes Bridge - Draugen S40 Developed application in Artemis 2000 for MTO-calculation and reporting in connection with tender preparation. Lectured at 4 courses in network planning for employees at Kværner Egersund. 1989 Lectured at courses in network planning for Aune Engineering, Arbeidstilsynet Merkantildata. Rev.: 23/2-2009 Page 3 of 7 h:\web nordskog.no bruk
1988-1990 Application developed in Artemis 2000: - Project planning (1 day course) - Document control - MTO-calculation and reporting - Accounting according to NS 4102 - Resource planning and control (smaller factories) - Project control (Consultancy companies) 1984-1988 : KVÆRNER ENGINEERING A.S, Oslo Kværner Research and Development Division Specialist Planner/Cost Controller (1988) Responsible in preparation of Artemis 9000 applications for cost- and man-hour control for Snorre TLP, AL & CLB. Client: Kværner Brug A/S. Responsible Planner in tendering Snorre TLP (tether elements) by using Artemis 9000. Client: Kværner Brug A/S. Responsible Planner in tendering Snorre Subsea Template (integration test) by using Hornet planning system. Client: Kværner Subsea Contracting A/S. Responsible Planner in tendering Snorre Subsea Template (design & fabrication) by using Artemis 9000. Responsible Planner for creating and analysing network and construction schedules for: - Snorre Subsea Template - Snorre Remote Operated Maint. Vehicle by using Artemis 9000. Client: Saga Petroleum A/S. Specialist Cost Controller (1987) Developed application at R & D Division for project control services of 133 projects. Artemis 6000 and Artemis 9000. Senior Cost Controller (1986/1987) Participated in tendering, developed networks of smaller projects in Artemis 6000. Senior Cost Controller (1986(87) Responsible controller for updating, reporting and developing programs in Artemis 6000. Specialist Subsea Engineer (1985) Activity responsible engineer for design, fab., testing and operational procedures of power/control cable installation tool. Rev.: 23/2-2009 Page 4 of 7 h:\web nordskog.no bruk
Specialist Subsea Engineer (1985) Executed failure mode and effect and criticality analysis (FMECA) of personnel transfer to Subsea Atmospheric System (SAS). Specialist Subsea Engineer (1984/1985) Activity responsible Engineer for survey of available systems to transport personnel and equipment to the Subsea Atmospheric System (SAS). 1981-1984 : STOLT-NIELSENS REDERI A/S Stolt-Nielsen Seaway Contracting A/S, Oslo Designed sophisticated computer data storage system for in-service inspection. Consultant for engineering all data communication between Stolt-Nielsen Seaway companies and vessels. Participating in preparation of tendering documents including pricing, scheduling, programme development and negotiations with client. Consultancy work for Stolt-Nielsen Group of companies to develop operating procedures for inspection equipment and evaluation of new inspection equipment. Project Engineer (1984) Development of hyperbaric welding procedures. Responsible for Quality Assurance documentation during dry chamber test in Bergen and infjord test at Klosterfjorden. Client: Statpipe Project Leader (1983) Development and compilation of Tender Documents for subsea inspection of pipeline, risers and jackets on Seme Oilfield in Benin, and final evaluation of tenderers. Client: Saga Petroleum a.s Project Leader (1982) Development of Inspection Manuals and Initial Inspection Guidelines, above and below water, for Seme Oilfield of Benin. This involved 4 pipelines and 3 jackets. Client: Saga Petroleum a.s Senior Project Engineer (1981) Compilation of Summary Reports for 1979/1980 subsea inspection on Bombay High. Client: ONGC, Bombay. Senior Project Engineer (1981) Preparation of Stolt-Nielsen Seaway jacket inspection Programmes. Client: PEMEX, Mexico Gulf. 1973-1980 : DET NORSKE VERITAS, Oslo. Industrial and Offshore Division Project Engineer (1979/1980) Preparation of Inspection Guidelines and Summary Reports for above and below water structures and training DnV-engineers within these subjects. Also responsible for starting Rev.: 23/2-2009 Page 5 of 7 h:\web nordskog.no bruk
up inspection above water on Frigg QP and supervision of maintenance / repair of Elf Frigg Flare and Base Plate. Project Engineer (1978/1979) Responsible for evaluation of inspection programmes above and below water and organising training of local BKI-personnel and NDT-divers on behalf of BKI (Indonesian Certifying Authority) on IIAPCO Cinta Field in the Jofa Sea, Indonesian. Section leader for Veritas Employee Organisation (VEFF) on Industrial and Offshore Division (1978). Special Surveyor (1978) Subsea control of bronze-lugs and internal control of pipelines, manager of diver magnetic particle inspection courses, responsible for training engineers in evaluation of inspection data and preparing Inspection Guidelines for certification of diving NDTequipment, taking part in development and testing of computerising inspection data. Senior Surveyor (1975/1978) Various jobs offshore for inspection, supervising, saturation diving, surface-oriented diving, certification of diving NDT-equipment, inspection capacity testing of remote operated vehicles, preparing inspection procedures and Inspection Guidelines and Inspection Summary Reports for subsea offshore structures, systemizing inspection data for computerising. COURSES - Magnetic Particle Inspection at DnV - Ultrasonic Examination I at DnV - Radiographic Examination at DnV - Material Techniques at DnV - EDP, introduction course at Computas - SESAM 69 (finite element analysis) at Computas - Deep diving course at Håkonsvern, arranged by DnV - Bell diving course at 3X, arranged by DnV - Course in emergency rescue of bell diver, arranged by Seaway Diving. - Extended diving theory at Norwegian Underwater Institute, arranged by DnV - Safety Analysis at DnV - IBM RPGII programming at IBM - IBM S/34 implementing at IBM - Project Management, arranged by NIF - Project Management and Methods, arranged by IBM - Artemis 6000 IPB at Metier - Artemis 6000 IPA at Metier - Artemis 6000 NPP at Metier - Norwegian Defence Management Seminar B, arranged by NAK. - Artemis 2000 UCS at Metier - Artemis 2000 SDW at Metier - Safety Course HSE at Troll Kollsnes - Practical course in internal quality revision with approved examination at DnV (2000). - Basic work in quality work by NFKL (Excellent Norway) - 40 hours course in working environment (2001). - 4 weeks course at NHO s Safety Superviser School (2002) - 40 hours compressed course Quality System Manager with approved examination (2004). Rev.: 23/2-2009 Page 6 of 7 h:\web nordskog.no bruk
- Accredited certificate as Quality System Manager, QSM-025, valid untill 19-May-2009 - Industrial Defence Supervisor Course, arranged by NSO 7-8 Sep 2004. - Industrial Defence Task Management course, arranged by NSO 23-24 May 2006 - Risk Manager course, 40 hrs, 8-12 January 2007 OFFSHORE EXPERIENCE - 48 periods offshore (Ekofisk area, Viking Field, Frigg Field, Cinta Field, Seme Field) - 1076 hours saturation diving with Seaway Diving and Oceaneering - Approx. 500 hours SOD diving with Seaway Diving, 2 W, Strongwork, Oceaneering and Comex Services. Rev.: 23/2-2009 Page 7 of 7 h:\web nordskog.no bruk