REF. CL/0248/b Sectionneur rotatif traversant d intérieur Wall bushing disconnector for indoor substation TYPE SR2002 72,5 kv - intensité / nominal current 2000 A - BIL 325 kv Icc / Ith 31,5 ka / 3 sec - Icc crête / Ip peak : 80 ka Caractéristiques techniques Technical datas Tension nominale / Rated voltage 72,5 kv Tenue diélectrique à 50/60 Hz/1 minute (kv eff.) / Dielectric withstand at 50/60 Hz for 1 minute (kv rms) à la masse / to earth 140 kv entrée, sortie / accross isolating distance > 160 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Dielectric withstand rated lightning impulse withstand (1,2 / 50 µs) à la masse / to earth 325 kv entrée, sortie / accross isolating distance > 375 kv Intensité nominale / Rated current 1250 A - 2000 A Courant de court-circuit / Rated short circuit current -31,5 ka / 3 sec - 80 ka crête / peak Résistance du sectionneur / Main circuit resistance 1250 A : 45 µohm - 2000 A : 30 µohm Isolateur en résine / Epoxy insulator ligne de fuite minimum / minimum creepage distance 1600 mm effort en tête / cantilever 8000 N Plages de raccordement / Terminal pads cuivre argenté / silver plated copper Efforts mécaniques sur les bornes / Mechanical terminal loads 400 N Epaisseur de mur maxi / Thickness of the wall 200 mm Poids d un pôle / One pole weight 1250 A : 110 kg - 2000 A : 140 kg Les choix Choices Sectionneur de terre associé au sectionneur / Earthing switch associated with disconnector Organes de manœuvre du sectionneur / Main disconnector drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) Organes de manœuvre du sectionneur de terre / Earthing switch drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) Règles générales General features Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test conditions and shop inspection as per document 00DAP01 (annexes) Emballage selon SEI 4 classe a / Packing as per SEI 4 class a Rapports d essais disponibles / Available Type tests reports
REF. CL/0248/b Plans d encombrement Outline drawings Avec mise à la terre -With earthing switch Sans mise à la terre -Without earthing switch
REF. CL/0248/b Plan d installation avec commande électrique Erection drawing with electrical operating
REF. CL/0248/b Plan d installation avec commande manuelle Erection drawing with manual operating
REF. CL/0249/b Sectionneur rotatif traversant d intérieur Wall bushing disconnector for indoor substation TYPE SR18900 123 kv - intensité / nominal current < 2000 A - BIL 550 kv Icc / Ith 31,5 ka / 3 sec - Icc crête / Ip peak : 80 ka Caractéristiques techniques Technical datas Tension nominale / Rated voltage 123 kv Tenue diélectrique à 50/60 Hz/1 minute (kv eff.) / Dielectric withstand at 50/60 Hz for 1 minute (kv rms) à la masse / to earth 230 kv entrée, sortie / accross isolating distance > 265 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Dielectric withstand rated lightning impulse withstand (1,2 / 50 µs) à la masse / to earth 550 kv entrée, sortie / accross isolating distance > 630 kv Intensité nominale / Rated current 1250 A - 2000 A Courant de court-circuit / Rated short circuit current -31,5 ka / 3 sec - 80 ka crête / peak Résistance du sectionneur / Main circuit resistance 1250 A : 55 µ ohm - 2000 A : 35 µ ohm Isolateur porcelaine / Porcelain insulator ligne de fuite minimum / minimum creepage distance 1970 mm ou/or 2500 mm effort en tête / cantilever 4000 N Efforts mécaniques sur les bornes / Mechanical terminal loads 500 N Plages de raccordement / Terminal pads cuivre argenté / silver plated copper Epaisseur de mur maxi / Thickness of the wall 200 mm Poids d un pôle / One pole weight 250 kg Les choix Choices Sectionneur de terre associé au sectionneur / Earthing switch associated with disconnector Organes de manœuvre du sectionneur / Main disconnector drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) Organes de manœuvre du sectionneur de terre / Earthing switch drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) Règles générales General features Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test conditions and shop inspection as per document 00DAP01 (annexes) Emballage selon SEI 4 classe a / Packing as per SEI 4 class a Rapports d essais disponibles / Available Type tests reports
REF. CL/0249/b Plans d encombrement Outline drawings Sans mise à la terre Without earthing switch Avec mise à la terre With earthing switch
Plan d installation (position horizontale) Erection drawing (horizontal position) REF. CL/0249/b
REF. CL/0249/b Plan d installation (position verticale) Erection drawing (vertical position)
REF. CL/0250/b Sectionneur rotatif traversant d intérieur Wall bushing disconnector for indoor substation TYPE SR18900 145 kv - intensité / nominal current < 2000 A - BIL 650 kv Icc / Ith 31,5 ka / 3 sec - Icc crête / Ip peak : 80 ka Caractéristiques techniques -Technical datas Tension nominale / Rated voltage 145 kv Tenue diélectrique à 50/60 Hz/1 minute (kv eff.) / Dielectric withstand at 50/60 Hz for 1 minute (kv rms) -à la masse / to earth 275 kv -entrée, sortie / accross isolating distance > 315 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Dielectric withstand rated lightning impulse withstand (1,2 / 50 µs) -à la masse / to earth 650 kv -entrée, sortie / accross isolating distance > 750 kv Intensité nominale / Rated current 2000 A Courant de court-circuit / Rated short circuit current -31,5 ka / 3 sec - 80 ka crête / peak Résistance du sectionneur / Main circuit resistance 30 µ ohm Isolateur porcelaine / Porcelain insulator ligne de fuite minimum / minimum creepage distance 2900 mm effort en tête / cantilever 4000 N Plages de raccordement / Terminal pads cuivre argenté / silver plated copper Efforts mécaniques sur les bornes / Mechanical terminal loads 500 N Epaisseur de mur maxi / Thickness of the wall 300 mm Poids d un pôle / One pole weight 400 kg Les choix Choices Sectionneur de terre associé au sectionneur / Earthing switch associated with disconnector Organes de manœuvre du sectionneur / Main disconnector drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) Organes de manœuvre du sectionneur de terre / Earthing switch drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) Option pour sectionneur / Option for disconnector transfert de barre / bus-transfer current switching Règles générales General features Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test conditions and shop inspection as per document 00DAP01 (annexes) Emballage selon SEI 4 classe a / Packing as per SEI 4 class a Rapports d essais disponibles / Available Type tests reports
REF. CL/0250/b Plans d encombrement Outline drawings Avec mise à la terre With earthing switch
Plan d installation (position horizontale) Erection drawing (horizontal position) REF. CL/0250/b
REF. CL/0250/b Plan d installation (position verticale) Erection drawing (vertical position)
REF. CL/0260/d Sectionneur coulissant Co-axial disconnector TYPE SC1000 Ur : 24 / 25,8 kv - BIL 125 / 150 kv - Ir : 12500 A Ik : 400 ka - tk : 3s - Ip : 1000 ka Caractéristiques techniques Technical datas Tension nominale / Rated voltage Ur : 24/25,8 kv Tenue diélectrique à 50/60 Hz/1 minute (kv eff.) / Dielectric withstand at 50/60 Hz for 1 minute (kv rms) à la masse / to earth 24 kv : 50 kv - 25,8 kv : 70 kv entrée, sortie / accross isolating distance 24 kv : 60 kv - 25,8 kv : 77 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Dielectric withstand rated lightning impulse withstand (1,2 / 50 µs) à la masse / to earth 24 kv : 125 kv - 25,8 kv : 150 kv entrée, sortie / accross isolating distance 24 kv : 145 kv - 25,8 kv : 165 kv Intensité nominale / Rated current Courant de court-circuit assigné / Rated short circuit withstand current Ir : 12500 A (sous enveloppe/enclosed) Ik : 400 ka - tk : 3s - Ip : 1000 ka Résistance du sectionneur / Main circuit resistance 3 µohms (12500 A) Isolateur en résine Epoxy / Epoxy resin insulator ligne de fuite minimum / minimum creepage distance 550 mm Nombre de cycles de manœuvres sans maintenance / Number of operating cycles without maintenance 10 000 cycles Plages de raccordement / Terminal pads Poids d un pôle / One pole weight cuivre argenté / silver plated copper 500 kg Les choix Choices Sectionneur de terre associé au sectionneur (voir ST300 et ST90) / Earthing switch associated with disconnector (see ST300 and ST90) Organes de manœuvre du sectionneur / Main disconnector drives motorisé / electrical (EOM) Type MT150 manœuvre unipolaire / one pole operated Règles générales General features Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test conditions and shop inspection as per document 00DAP01 (annexes) Emballage selon SEI 4 classe a / Packing as per SEI 4 class a Rapports d essais de type disponibles / Available Type tests reports
REF. CL/0260/d Plans d encombrement Outline drawings Exemple de réalisation pour installation suspendue Example of under hung installation
REF. CL/0261/e Sectionneur forte intensité pour jeu de barres d alternateur Heavy current disconnector for power plant TYPE SC300 Ur : 24 / 25,8 kv - BIL 125 / 150 kv - Ir : 3150 A Ik : 160 ka - tk : 3s - Ip : 462 ka Caractéristiques techniques Technical datas Tension nominale / Rated voltage Ur : 24/25,8 kv Tenue diélectrique à 50/60 Hz/1 minute (kv eff.) / Dielectric withstand at 50/60 Hz for 1 minute (kv rms) à la masse / to earth 24 kv : 50 kv - 25,8 kv : 70 kv entrée, sortie / accross isolating distance 24 kv : 60 kv - 25,8 kv : 77 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Dielectric withstand rated lightning impulse withstand (1,2 / 50 µs) à la masse / to earth 24 kv : 125 kv - 25,8 kv : 150 kv entrée, sortie / accross isolating distance 24 kv : 145 kv - 25,8 kv : 165 kv Intensité nominale / Rated current Courant de court-circuit assigné / Rated short circuit withstand current Ir : 3150 A (sous enveloppe/enclosed) Ik : 160 ka - tk : 3s - Ip : 462 ka Résistance du sectionneur / Main circuit resistance 15 µohms (3150 A) Isolateur en résine Epoxy / Epoxy resin insulator ligne de fuite minimum / minimum creepage distance Plages de raccordement / Terminal pads 24 kv : 390 mm - 25,8 kv : 420 mm aluminium argenté / silver plated aluminium Nombre de cycles de manœuvres sans maintenance / Number of operating cycles without maintenance 10 000 cycles Poids d un pôle / One pole weight 150 kg Les choix Choices Rupture brusque / Quick breaking device : Voir SC300 RB / See SC300 RB Sectionneur de terre associé au sectionneur / Earthing switch associated with disconnector courant de court-circuit assigné / rated short-circuit withstand current : Ik : 90 ka - tk : 1s - Ip : 225 ka Organes de manœuvre du sectionneur / Main disconnector drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) manœuvre unipolaire ou tripolaire / one pole or gang operated Organes de manœuvre du sectionneur de terre / Earthing switch drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) manœuvre unipolaire ou tripolaire / one pole or gang operated Règles générales General features Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test conditions and shop inspection as per document 00DAP01 (annexes) Emballage selon SEI 4 classe a / Packing as per SEI 4 class a Rapports d essais de type disponibles / Available Type tests reports
REF. CL/0261/e Plans d encombrement (tension nominale : 24 kv) Outline drawings (rated voltage: 24 kv)
REF. CL/0261/e Plan d installation verticale et horizontale Vertical and horizontal erection drawing
REF. CL/0261/e Plan d installation verticale et horizontale avec sectionneur de terre Vertical and horizontal erection
REF. CL/0261/e Plan d installation verticale et horizontale Vertical and horizontal erection drawing
REF. CL/0262/b Sectionneur basculant à ouverture verticale Vertical break disconnector TYPE SB19250A Ur : 24 / 25,8 kv - BIL 125 / 150 kv - Ir : 6300 A Ik : 63 ka - tk : 1s - Ip : 164 ka Caractéristiques techniques Technical datas Tension nominale / Rated voltage Ur : 24/25,8 kv Tenue diélectrique à 50/60 Hz/1 minute (kv eff.) / Dielectric withstand at 50/60 Hz for 1 minute (kv rms) à la masse / to earth 24 kv : 50 kv - 25,8 kv : 70 kv entrée, sortie / accross isolating distance 24 kv : 60 kv - 25,8 kv : 77 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Dielectric withstand rated lightning impulse withstand (1,2 / 50 µs) à la masse / to earth 24 kv : 125 kv - 25,8 kv : 150 kv entrée, sortie / accross isolating distance 24 kv : 145 kv - 25,8 kv : 165 kv Intensité nominale / Rated current Ir : 6300 A (sous enveloppe/enclosed) Courant de court-circuit assigné / Rated short circuit withstand current Ik : 63 ka - tk : 1s - Ip : 164 ka Résistance du sectionneur(24 kv) / Main circuit resistance (24 kv) 4 µω (6300 A) Isolateur en résine Epoxy / Epoxy resin insulator ligne de fuite minimum / minimum creepage distance 24 kv : 390 mm - 25,8 kv : 420 mm Plages de raccordement / Terminal pads cuivre argenté / silver plated copper Nombre de cycles de manœuvres sans maintenance / Number of operating cycles without maintenance 5000 cycles Poids d un pôle / One pole weight 125 kg Les choix Choices Sectionneur de terre associé au sectionneur / Earthing switch associated with disconnector courant de court-circuit assigné / rated short-circuit withstand current : Ik : 90 ka/1s - tk : 1s - Ip : 225 ka Organes de manœuvre du sectionneur / Main disconnector drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) manœuvre unipolaire ou tripolaire / one pole or gang operated Organes de manœuvre du sectionneur de terre / Earthing switch drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) manœuvre unipolaire ou tripolaire / one pole or gang operated Règles générales General features Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test conditions and shop inspection as per document 00DAP01 (annexes) Emballage selon SEI 4 classe a / Packing as per SEI 4 class a Rapports d essais de type disponibles / Available Type tests reports
REF. CL/0262/b Plans d encombrement Outline drawings (tension nominale 24 kv / rated voltage 24 kv - intensité nominale 4000 A / nominal current 4000 A)
REF. CL/0262/b Plan d encombrement Outline drawing (tension nominale 24 kv / rated voltage 24 kv - intensité nominale 6300 A / nominal current 6300 A)
REF. CL/0262/b Plan d installation verticale et horizontale Vertical and horizontal erection drawing
REF. CL/0263/b Sectionneur-interrupteur pour jeu de barres d alternateur Disconnector-switch for generator busbars Conforme à la norme CEI 62271-102 - IEC 62271-102 standard compliant TYPE IT300 Ur : 24 / 25,8 kv - BIL 125 / 150 kv - Ir : 3150 A Ik : 160 ka - tk : 3s - Ip : 511 ka Caractéristiques techniques Technical datas Tension nominale / Rated voltage Pouvoir de coupure et de fermeture assigné / Rated breaking and making current Ur : 24/25,8 kv Ir : 3150 A - Ur : 24/25,8 kv Tenue diélectrique à 50/60 Hz/1 minute (kv eff.) / Dielectric withstand at 50/60 Hz for 1 minute (kv rms) à la masse / to earth 24 kv : 50 kv - 25,8 kv : 70 kv entrée, sortie / accross isolating distance 24 kv : 60 kv - 25,8 kv : 77 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Dielectric withstand rated lightning impulse withstand (1,2 / 50 µs) à la masse / to earth 24 kv : 125 kv - 25,8 kv : 150 kv entrée, sortie / accross isolating distance 24 kv : 145 kv - 25,8 kv : 165 kv Intensité nominale / Rated current Courant de court-circuit assigné / Rated short circuit withstand current Ir : 3150 A (sous enveloppe/enclosed) Ik : 160 ka - tk : 3s - Ip : 511 ka Ik : 200 ka - tk : 1s - Ip : 511 ka Résistance du sectionneur / Main circuit resistance 15 µohm (3150 A) Isolateur en résine Epoxy / Epoxy resin insulator ligne de fuite minimum / minimum creepage distance 24 kv : 390 mm - 25,8 kv : 420 mm Plages de raccordement / Terminal pads Nombre de cycles de manoeuvre / Number of operating cycles Poids d un pôle / One pole weight cuivre argenté / silver plated copper 10 000 cycles 220 kg Les choix Choices Organes de manœuvre du sectionneur / Main disconnector drives motorisé / electrical (EOM) manœuvre unipolaire ou tripolaire / one pole or gang operated Règles générales General features Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test conditions and shop inspection as per document 00DAP01 (annexes) Emballage selon SEI 4 / Packing as per SEI 4 Rapports d essais de type disponibles / Available Type tests reports
REF. CL/0263/b Plan d encombrement Outline drawing
Plan d encombrement IT300 en caisson Metal enclosed IT300 outline drawing REF. CL/0263/b
REF. CL/0264/b Sectionneur de couplage et de terre coulissant Co-axial coupling-switch & earthing-switch for generator busbars TYPE ST300 Ur : 24 / 25,8 kv - BIL 125 / 150 kv Ik : 160 ka - tk : 1s - Ip : 462 ka Caractéristiques techniques Technical datas Tension nominale / Rated voltage Ur : 24/25,8 kv Tenue diélectrique à 50/60 Hz/1 minute (kv eff.) / Dielectric withstand at 50/60 Hz for 1 minute (kv rms) à la masse / to earth 24 kv : 50 kv - 25,8 kv : 70 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Dielectric withstand rated lightning impulse withstand (1,2 / 50 µs) à la masse / to earth 24 kv : 125 kv - 25,8 kv : 150 kv Intensité temporaire / Short time current I : 4000 A / 30 min - I : 6300 A / 10 min Courant de court-circuit assigné / Rated short circuit withstand current Plages de raccordement / Terminal pads Ik : 160 ka - tk : 1s - Ip : 462 ka aluminium argenté / silver plated aluminium Isolateur en résine Epoxy / Epoxy resin insulator ligne de fuite minimum / minimum creepage distance 24 kv : 390 mm - 25,8 kv : 420 mm Nombre de cycles de manœuvres sans maintenance / Number of operating cycles without maintenance 5000 cycles Poids d un pôle / One pole weight 130 kg Les choix Choices Organes de manœuvre du sectionneur / Main disconnector drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) manœuvre unipolaire ou tripolaire / one pole or gang operated Règles générales General features Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test conditions and shop inspection as per document 00DAP01 (annexes) Emballage selon SEI 4 classe a / Packing as per SEI 4 class a Rapports d essais de type disponibles / Available Type tests reports
REF. CL/0264/b Plans d encombrement et d installation Outline and installation drawings
Plans d encombrement et d installation Outline and installation drawings REF. CL/0264/b
REF. CL/0264/b Plan détaillé Details drawing
REF. CL/0266/b Sectionneur basculant à ouverture verticale à dispositif de fermeture brusque Vertical break disconnector with quick making device TYPE SB19250A & FB Ur : 24 / 25,8 kv - BIL 125 / 150 kv - Ir : 6300 A Ik : 63 ka - tk : 1s - Ip : 164 ka Caractéristiques techniques Technical datas Tension nominale / Rated voltage Ur : 24/25,8 kv Tenue diélectrique à 50/60 Hz/1 minute (kv eff.) / Dielectric withstand at 50/60 Hz for 1 minute (kv rms) à la masse / to earth 24 kv : 50 kv - 25,8 kv : 70 kv entrée, sortie / accross isolating distance 24 kv : 60 kv - 25,8 kv : 77 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Dielectric withstand rated lightning impulse withstand (1,2 / 50 µs) à la masse / to earth 24 kv : 125 kv - 25,8 kv : 150 kv entrée, sortie / accross isolating distance 24 kv : 145 kv - 25,8 kv : 165 kv Intensité permanente nominale / Rated continous current Ir : 6300 A (sous enveloppe/enclosed) Intensité temporaire / Short time current Ir : 8000 A / 30 min - Ir : 12500 A / 10 min Courant de court-circuit assigné / Rated short circuit withstand current Ik : 63 ka - tk : 1s - Ip : 164 ka Résistance du sectionneur(24 kv) / Main circuit resistance (24 kv) 4 µω (6300 A) Isolateur en résine Epoxy / Epoxy resin insulator ligne de fuite minimum / minimum creepage distance 24 kv : 390 mm - 25,8 kv : 420 mm Plages de raccordement / Terminal pads cuivre argenté / silver plated copper Nombre de cycles de manœuvres sans maintenance / Number of operating cycles without maintenance 5000 cycles Poids d un pôle / One pole weight SB19250 : 125 kg - SB19250 FB : 140 kg Les choix Choices Dispositif de fermeture brusque pour freinage d alternateur / Quick making device for generator braking SB19250 FB I : 7000 A sous U : 3 kv / I : 7000 A under U : 3 kv Sectionneur de terre associé au sectionneur de phase centrale / Earthing switch associated with center phase disconnector courant de court-circuit assigné / rated short-circuit withstand current : Ik : 90 ka - tk : 1s - Ip : 225 ka Organes de manœuvre du sectionneur / Main disconnector drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) manœuvre tripolaire / gang operated Organes de manœuvre du sectionneur de terre / Earthing switch drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) Règles générales General features Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test conditions and shop inspection as per document 00DAP01 (annexes) Emballage selon SEI 4 classe a / Packing as per SEI 4 class a Rapports d essais de type disponibles / Available Type tests reports
REF. CL/0266/b Plans d encombrement Outline drawings (intensité nominale 4000 A / nominal current 4000 A)
Plans d installation Installation drawings REF. CL/0266/b
REF. CL/0268/c Sectionneur basculant à fermeture brusque forte intensité pour l intérieur High-current vertical break disconnector for indoor use TYPE SB250 & FB Ur : 24 / 25,8 kv - BIL 125 / 150 kv - Ir : 10000 A Ik : 100 ka - tk : 3s - Ip : 320 ka Caractéristiques techniques Technical datas Tension nominale / Rated voltage Ur : 24/25,8 kv Tenue diélectrique à 50/60 Hz/1 minute (kv eff.) / Dielectric withstand at 50/60 Hz for 1 minute (kv rms) à la masse / to earth 24 kv : 50 kv - 25,8 kv : 70 kv entrée, sortie / accross isolating distance 24 kv : 60 kv - 25,8 kv : 77 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Dielectric withstand rated lightning impulse withstand (1,2 / 50 µs) à la masse / to earth 24 kv : 125 kv - 25,8 kv : 150 kv entrée, sortie / accross isolating distance 24 kv : 145 kv - 25,8 kv : 165 kv Intensité nominale / Rated current Intensité temporaire / Short time current Courant de court-circuit assigné / Rated short circuit withstand current Ir : 10000 A (sous enveloppe/enclosed) I : 12500 A / 30 min - I : 20000 A / 10 min Ik : 100 ka - tk : 3s - Ip : 320 ka Résistance du sectionneur / Main circuit resistance 3 µohms (10000 A) Isolateur en résine Epoxy / Epoxy resin insulator ligne de fuite minimum / minimum creepage distance Plages de raccordement / Terminal pads 24 kv : 390 mm - 25,8 kv : 420 mm cuivre argenté / silver plated copper Nombre de cycles de manœuvres sans maintenance / Number of operating cycles without maintenance 10 000 cycles Poids d un pôle / One pole weight 225 kg Les choix Choices Dispositif de fermeture brusque pour freinage d alternateur / Quick making device for generator braking (SB250 FB) I : 7000 A sous U : 3 kv / I : 7000 A under U : 3 kv Sectionneur de terre associé au sectionneur de phase centrale / Earthing switch associated with center phase disconnector courant de court-circuit assigné / rated short-circuit withstand current : Ik : 90 ka - tk : 1s - Ip : 225 ka Organes de manœuvre du sectionneur / Main disconnector drives motorisé / electrical (EOM) manœuvre tripolaire / gang operated Organes de manœuvre du sectionneur de terre / Earthing switch drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) Règles générales General features Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified). Conditions d essais de routine et de réception selon document 00DAP01 / Routine test conditions and shop inspection as per document 00DAP01 (annexes). Emballage selon SEI 4 classe a / Packing as per SEI 4 class a. Rapports d essais de type disponibles / Available Type tests reports.
REF. CL/0268/c Plans d encombrement Outline drawings
REF. CL/0268/c Plan d installation avec commande électrique Erection drawing with electrical operating
REF. CL/0271/b Sectionneur de terre Earthing switch disconnector TYPE ST36001 72,5 kv - BIL 325 kv Icc / Ith 31,5 ka / 3 sec - Icc crête / Ip peak 80 ka Caractéristiques techniques Technical datas Installtion intérieure / For indoor installation Tension nominale / Rated voltage 72,5 kv Tenue diélectrique à 50/60 Hz/1 minute (kv eff.) / Dielectric withstand at 50/60 Hz for 1 minute (kv rms) à la masse / to earth 140 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Dielectric withstand rated lightning impulse withstand (1,2 / 50 µs) à la masse / to earth 325 kv Courant de court-circuit / Rated short circuit current 31,5 ka / 3 sec - 80 ka crête / peak Isolateur porcelaine / Porcelain insulator ligne de fuite minimum / minimum creepage distance effort en tête / cantilever Plages de raccordement / Terminal pads 1700 mm 4000 N aluminium Les choix Choices Organes de manœuvre du sectionneur de terre / Earthing-switch drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) Etablissement de coupure de courants induits / Induced current switching Règles générales General features Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test conditions and shop inspection as per document 00DAP01 (annexes) Emballage selon SEI 4 classe a / Packing as per SEI 4 class a Rapports d essais disponibles / Available Type tests reports
REF. CL/0271/b Plans d encombrement Outline drawings
Plans d installation Erection drawings REF. CL/0271/b
REF. CL/0309/c Sectionneur forte intensité pour jeu de barres d alternateur Heavy current disconnector for power plant TYPE SC300 RB Ur : 24 / 25,8 kv - BIL 125 / 150 kv - Ir : 3150 A Ik : 160 ka - tk : 3s - Ip : 462 ka Caractéristiques techniques Technical datas Tension nominale / Rated voltage Ur : 24/25,8 kv Tenue diélectrique à 50/60 Hz/1 minute (kv eff.) / Dielectric withstand at 50/60 Hz for 1 minute (kv rms) à la masse / to earth 24 kv : 50 kv - 25,8 kv : 70 kv entrée, sortie / accross isolating distance 24 kv : 60 kv - 25,8 kv : 77 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Dielectric withstand rated lightning impulse withstand (1,2 / 50 µs) à la masse / to earth 24 kv : 125 kv - 25,8 kv : 150 kv entrée, sortie / accross isolating distance 24 kv : 145 kv - 25,8 kv : 165 kv Intensité nominale / Rated current Pouvoir de coupure / Rated breaking current Pouvoir de fermeture / Rated making current Courant de court-circuit assigné / Rated short circuit withstand current Ir : 3150 A (sous enveloppe/enclosed) I : 6 A / U : 15 kv Non / Without Ik : 160 ka - tk : 3s - Ip : 462 ka Résistance du sectionneur / Main circuit resistance 15 µohms (3150 A) Isolateur en résine Epoxy / Epoxy resin insulator ligne de fuite minimum / minimum creepage distance Plages de raccordement / Terminal pads 24 kv : 390 mm - 25,8 kv : 420 mm aluminium argenté / silver plated aluminium Nombre de cycles de manœuvres sans maintenance / Number of operating cycles without maintenance 10 000 cycles Poids d un pôle / One pole weight 150 kg Les choix Choices Sectionneur de terre associé au sectionneur / Earthing switch associated with disconnector courant de court-circuit assigné / rated short-circuit withstand current : Ik : 90 ka - tk : 1s - Ip : 225 ka Organes de manœuvre du sectionneur / Main disconnector drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) manœuvre unipolaire ou tripolaire / one pole or gang operated Organes de manœuvre du sectionneur de terre / Earthing switch drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) manœuvre unipolaire ou tripolaire / one pole or gang operated Règles générales General features Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test conditions and shop inspection as per document 00DAP01 (annexes) Emballage selon SEI 4 classe a / Packing as per SEI 4 class a
REF. CL/0309/c Plans d encombrement (tension nominale : 24 kv) Outline drawings (rated voltage: 24 kv)
REF. CL/0309/c Plan d installation verticale et horizontale Vertical and horizontal erection drawing
REF. CL/0309/c Plan d installation verticale et horizontale avec sectionneur de terre Vertical and horizontal erection
REF. CL/0309/c Plan d installation verticale et horizontale Vertical and horizontal erection drawing
REF. CL/0310/e Sectionneur de mise à la terre Earthing switch disconnector Conforme à la norme CEI 62271-102 IEC 62271-102 standard compliant TYPE STAS 90 Ur : 24 / 25,8 kv - BIL 125 / 150 kv Ik : 125 ka - tk : 3s - Ip : 463 ka Caractéristiques techniques Technical datas Tension nominale / Rated voltage Ur : 24/25,8 kv Tenue diélectrique à 50/60 Hz/1 minute (kv eff.) / Dielectric withstand at 50/60 Hz for 1 minute (kv rms) à la masse / to earth 24 kv : 50 kv - 25,8 kv : 70 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Dielectric withstand rated lightning impulse withstand (1,2 / 50 µs) à la masse / to earth 24 kv : 125 kv - 25,8 kv : 150 kv Intensité temporaire / Short time current : 1600 A / 30 min - I : 2500 A / 10 min - 10 000 A / 5 min - I : 10 000 A / 2 min Courant de court-circuit assigné / Rated short circuit current Ik : 125 ka - tk : 3s - Ip : 463 ka Ik : 160 ka - tk : 1s - Ip : 511 ka Isolateur en résine epoxy / Epoxy resin insulator ligne de fuite minimum / minimum creepage distance 24 kv : 330 mm - 25,8 kv : 350 mm Plages de raccordement / Terminal pads cuivre argenté / silver plated copper Nombre de cycles de manœuvres sans maintenance / Number of operating cycles without maintenance 10 000 cycles Poids d un pôle / One pole weight 35 kg Les choix Choices Organes de manœuvre du sectionneur / Earthing switch drivess manuel / manual (MOM) ou/or motorisé / electrical (EOM) manœuvre unipolaire ou multipolaire / one pole or mulitpole gang operated Règles générales General features Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test conditions and shop inspection as per document 00DAP01 (annexes) Emballage selon SEI 4 / Packing as per SEI 4 Rapports d essais de type disponibles / Available Type tests reports
REF. CL/0310/e Plans d encombrement Outline drawings
REF. CL/0310/e Plan d installation Erection drawing
REF. CL/0311/d Interrupteur sous vide, à coupure visible On load disconnector switch TYPE IT25 - Brevet n 2875 640 Ur : 25 kv - BIL 250 kv - Ir : 2000 A Ik : 31,5 ka - tk : 3s - Ip : 80 ka Applications Pour installation extérieure / For outdoor use température ambiante / ambient temperature use : - 25 C / + 40 C. Pour électrification ferroviaire 25 kv - 50 Hz / For railway electrification 25 kv - 50 Hz. Systèmes monophasés et biphasés / Single and two phases systems. Alimentation de caténaires / Catenaries feeding. Alimentation de chauffage d aiguillage / Feeding of heating of switching point. Alimentation d auxiliaires (banc de condensateur, transformateurs auxiliaires... / Feeding of auxiliaries (capacitor bank, auxiliary transformers...) Caractéristiques techniques Technical datas Tension nominale / Rated voltage Fréquence / Frequency Ur : 25 kv 50 Hz Tenue diélectrique à 50 Hz/1mn (kv eff.) / Rated power frequency withstand voltage 50 Hz/1 mn (kv rms) à la masse / to earth Ud : 95 kv entrée, sortie / accross isolating distance Ud : 110 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Lightning impulse withstand voltage (1,2 / 50 µs) à la masse / to earth Up : 250 kv entrée, sortie / accross isolating distance Up : 290 kv Intensité nominale / Rated current Courant de court-circuit assigné / Rated short circuit withstand current Pouvoir de coupure assigné / Rated breaking current Ir : 2000 A Ik : 31,5 ka - tk : 3s - Ip : 80 ka I1 : 2000 A Pouvoir de fermeture assigné en court-circuit / Rated making short circuit current Ima : 20 ka Chambre de coupure / breaking chamber ampoule à vide (fabrication ABB) / vacuum interrupter (made by ABB) Résistance du sectionneur / Main circuit resistance Isolateur en porcelaine ou silicone / porcelain or composite insulator ligne de fuite minimum / minimum creepage distance Plages de raccordement / Terminal pads 45 µohms 1320 mm cuivre argenté / silver plated copper Nombre d opérations sans maintenance / Number of operating without maintenance 10000 operations Tenue sous glace / Ice withstand Masse d un pôle / One pole weight 10 mm 80 kg
REF. CL/0311/d Configurations Position horizontale ou verticale / Horizontal or vertical installation. Installation monopolaire ou bipolaire / Single or double pole installation Sectionneur de terre associé au sectionneur / Combined earthing switch courant de court-circuit assigné / rated short-circuit withstand current : Ik : 31,5 ka - tk : 3s - Ip : 80 ka Organes de manœuvre du sectionneur et du sectionneur de terre / Disconnector and earthing switch drives manuel / manual (MOM) ou/or motorisé / electrical (EOM) contacts auxiliaires jusqu à 8NO + 8NF / auxiliary contacts up to 8NO + 8NC Plan d encombrement Outline drawing Règles générales General features Normes / Standards : IEC 60265-1 Cl E3-M2 - IEC 694 - IEC 62271-102 - EN 50152-2 Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test and shop inspection conditions as per document 00DAP01 Rapports d essais de type disponibles sur demande / Type tests reports available on request.
REF. CL/0327/b Interrupteur à coupure visible On load disconnector switch TYPE IT3600 UNe : 3000 V - BIL 95 kv - INe : 4000 A INCW : 75 ka Applications Pour installation extérieure / For outdoor use température ambiante / ambient temperature use : - 25 C / + 40 C. Pour électrification ferroviaire 750, 1500, 3000 Vc.c. / For railway electrification 750, 1500, 3000 Vd.c. Système monophasé / Single phase system. Alimentation de caténaires / Catenaries feeding. Alimentation d auxiliaires / Feeding of auxiliaries Caractéristiques techniques Technical datas Tension nominale / Rated voltage Fréquence / Frequency UNe : 750, 1500, 3000 Vc.c. / Vd.c. Courant continu / Direct current Tenue diélectrique à 50 Hz/1mn (kv eff.) / Rated power frequency withstand voltage 50 Hz/1 mn (kv rms) à la masse / to earth Ua : 44 kv entrée, sortie / accross isolating distance Ua : 53 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Lightening impulse withstand voltage (1,2 / 50 µs) à la masse / to earth UNi : 95 kv entrée, sortie / accross isolating distance UNi : 110 kv Intensité nominale / Rated current Courant de court-circuit assigné / Rated short circuit withstand current Pouvoir de coupure assigné / Rated breaking current Pouvoir de fermeture assigné en court-circuit / Rated making short circuit current INe : 4000 A INcw : 75 ka INe : 3000 A INSS : 70 ka Système de coupure / breaking system coupure dans l air par développement de l arc sur des cornes de soufflage / air breaking by arc extension between the arcing horns. Résistance du sectionneur / Main circuit resistance Isolateur en porcelaine ou silicone / porcelain or composite insulator ligne de fuite minimum / minimum creepage distance Plages de raccordement / Terminal pads 8 µohm 350 mm cuivre / copper Nombre d opérations sans maintenance / Number of operating without maintenance 2000 operations Tenue sous glace / Ice withstand Masse d un pôle / One pole weight 10 mm 60 kg
REF. CL/0327/b Configurations Position horizontale / Horizontal installation. Dégagement minimum au dessus de l appareil : 4 mètres / Minimum clearance above the disconnector : 4 meters Installation monopolaire / Single pole installation Organes de manœuvre de l interrupteur / Operating mechanism of on load disconnector switch manuel / manual (MOM) ou/or motorisé / electrical (EOM) contacts auxiliaires jusqu à 8NO + 8NF / auxiliary contacts up to 8NO + 8NC Plan d encombrement Outline drawing Règles générales General features Normes / Standards : EN 50123-1 - EN 50123-4 - IEC 694 - IEC 62271-102 Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test and shop inspection conditions as per document 00DAP01. Rapports d essais de type disponibles sur demande / Type tests reports available on request.
REF. CL/0328/a Interrupteur à coupure visible On load disconnector switch TYPE IT3000 UNe : 3000 V - BIL 95 kv - INe : 2000 A - 3000 A - 4000 A INCW : 50 ka Applications Pour installation extérieure / For outdoor use température ambiante / ambient temperature use : - 25 C / + 40 C. Pour électrification ferroviaire 750, 1500, 3000 Vc.c. / For railway electrification 750, 1500, 3000 Vd.c. Système monophasé / Single phase system. Alimentation de caténaires / Catenaries feeding. Alimentation d auxiliaires / Feeding of auxiliaries Caractéristiques techniques Technical datas Tension nominale / Rated voltage Fréquence / Frequency UNe : 750, 1500, 3000 Vc.c. / Vd.c. Courant continu / Direct current Tenue diélectrique à 50 Hz/1mn (kv eff.) / Rated power frequency withstand voltage 50 Hz/1 mn (kv rms) à la masse / to earth Ua : 38 kv entrée, sortie / accross isolating distance Ua : 45 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Lightening impulse withstand voltage (1,2 / 50 µs) à la masse / to earth UNi : 95 kv entrée, sortie / accross isolating distance UNi : 110 kv Intensité nominale / Rated current INe : 2000 A - 3000 A - 4000 A Courant de court-circuit assigné / Rated short circuit withstand current Pouvoir de coupure assigné / Rated breaking current INcw : 50 ka INe : 2000 A - 3000 A - 4000 A Système de coupure / breaking system coupure dans l air par développement de l arc sur des cornes de soufflage / air breaking by arc extension between the arcing horns. Résistance du sectionneur / Main circuit resistance 2000-3000 A : 25 µω - 4000 A : 15 µω Isolateur en porcelaine ou silicone / porcelain or composite insulator ligne de fuite minimum / minimum creepage distance 360 mm Plages de raccordement / Terminal pads cuivre nickelé / nickel plated copper Nombre d opérations sans maintenance / Number of operating without maintenance Tenue sous glace / Ice withstand Masse d un pôle / One pole weight 10 mm 1000 operations 2000-3000 A : 100 kg - 4000 A : 130 kg
REF. CL/0328/a Configurations Position horizontale / Horizontal installation. Dégagement minimum au dessus de l appareil : 4 mètres / Minimum clearance above the disconnector : 4 meters Installation monopolaire / Single pole installation Organes de manœuvre de l interrupteur / Operating mechanism of on load disconnector switch manuel / manual (MOM) ou/or motorisé / electrical (EOM) contacts auxiliaires jusqu à 8NO + 8NF / auxiliary contacts up to 8NO + 8NC Plan d encombrement Outline drawing Règles générales General features Normes / Standards : EN 50123-1 - EN 50123-4 - IEC 694 - IEC 62271-102 Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test and shop inspection conditions as per document 00DAP01. Rapports d essais de type disponibles sur demande / Type tests reports available on request.
REF. CL/0331/a Outdoor tilt disconnector switch IEC 62271-102 standard compliant TYPE SBE Ur : 24 to 72,5 kv - BIL 125 to 325 kv - Ir 6300 A Ik 63 ka - tk : 3s - Ip 164 ka Technical description Air disconnect switch, vertical-break moved by insulated transmission rod Contacts at breaking point and at hinge contact Tangencial contact lines between profiled stationery part and striped end of profiled switch current pad element. Contact Pressure insured by springs. Current path elements made of continuous spacered copper flat bar profils. Hinge stainless-steel axis in PTFE ring bearings housed in the current path tilting blades. Base frame support made of formed hot galvanized steel sheet. Installation can be either horizontally, or vertically, or bottom-up installed. Available choices Post insulators Standard: brown glazed as per IEC 273 C6 (6 kn) - Pollution grade 25 mm / kv Upon request: Pollution grade 31 mm/kv or as per ANSI (TR) Primary terminals Standard: - for 1250 & 2000A horizontal bare copper pad - for 3150A, 4000A & 6300A vertical bare copper pad Upon request: - tin plated or silver plated copper pad - horizontal pad for 3150A, 4000A & 6300A Operating drives Associated earthing switch Disconnector and earthing switch interlocking Earthing switch operating drives Seismic withstand Ice operation Mechanical endurance Small current breaking capacity Group operated or single pole operated Both manual and motor operation are available (see dedicated catalogues) Ik & tk standard same as disconnector Standard installation: at hinge side Upon request: at stationery side or at both sides Mechanical system fully integrated Group operated or single pole operated Both manual and motor operation are available (see dedicated catalogues) Standard: up to 0,2 g (higher values upon request) Standard: up to 10 mm (20 mm upon request) Standard: 2000 operations (open & close) (higher values upon request) Standard: 0,5 A (for higher values see options hereafter) Optional Rated voltage: Ur 17,5 kv (BIL 95 kv) - 38 kv (BIL 200 kv). Making and breaking capacity for bus-transfer currents (see dedicated catalogues) as per IEC 62271-102 Annex B. Breaking capacity for capacitiv and inductive currents (see dedicated catalogue). Breaking device for 6A under Ur. D.S. & E.S. interlocking with other apparatuses: Using either combined key lock system, electro-mechanical system (coils), or electrical (relays). E.S. automatically operated with disconnector by D.S. operating drive.
REF. CL/0331/a OUTDOOR TILT DISCONNECT SWITCH TYPE SBE - Ur: 24 to 72,5 kv - Outline drawing Type Rated voltage Ur Rated current Ir Ik tk 1 sec. 3 sec. upon request A B C D D' E F G H I J K L M N O P Q mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm Weight (Kg) DS only DS with ES SBE OUTDOOR TILT DISCONNECT SWITCH 24 kv 25,8 & 36 kv 52 kv 72.5 kv 1250A 31,5 ka 800 335 70 / / / 330 910 585 850 510 510 355 650 260 330 260 300 46 56 2000A 31,5 ka 800 335 70 / / / 330 915 585 850 510 510 355 650 260 330 260 300 47 57 3150A 63 ka 800 335 70 295 425 525 330 990 590 850 510 510 305 650 260 330 260 300 55 65 4000A 63 ka 800 335 70 295 425 525 330 990 590 850 510 510 305 650 260 330 260 300 57 67 6300A 63 ka 800 335 70 295 425 525 330 990 590 850 630 630 305 650 260 330 340 380 73 89 1250A 31,5 ka 950 360 70 / / / 505 1180 755 1000 630 630 525 800 285 355 260 300 53 64 2000A 31,5 ka 950 360 70 / / / 505 1185 755 1000 630 630 525 800 285 355 260 300 54 65 3150A 63 ka 950 360 70 295 550 695 505 1300 760 1000 630 630 475 800 285 355 260 300 63 73 4000A 63 ka 950 360 70 295 550 695 505 1300 760 1000 630 630 475 800 285 355 260 300 65 75 1250A 31,5 ka 1150 520 70 / / / 600 1420 850 1160 630 630 620 860 375 495 260 300 75 87 2000A 31,5 ka 1150 520 70 / / / 600 1425 850 1160 630 630 620 860 375 495 260 300 77 89 1250A 31,5 ka 1390 655 70 / / / 810 1810 1060 1435 630 630 830 1200 550 650 260 300 95 107 2000A 31,5 ka 1390 655 70 / / / 810 1815 1060 1435 750 630 830 1200 550 650 260 300 97 190
REF. CL/0331/a OUTDOOR TILT DISCONNECT SWITCH TYPE SBE Horizontal erection drawing for rated intensity Ur : 24 kv to 72,5 kv
REF. CL/0331/a OUTDOOR TILT DISCONNECT SWITCH TYPE SBE Vertical erection drawing for rated intensity Ur : 24 kv to 72,5 kv General features Applicable standard as per IEC 60694 & 62271-102. Products and contracts managed as per ISO 2001 (certified). Routine test and workshop inspection managed as per QA procedure internal document 00DAP01. Packing standard as per SEI specification (European commitee for packaging). Type test reports available upon request.
REF. CL/0333/a Indoor tilt disconnector switch IEC 62271-102 standard compliant TYPE SBI Ur : 24 to 36 kv - BIL 125 to 170 kv - Ir 8000 A Ik 80 ka - tk : 3s - Ip 208 ka Technical description Air disconnect switch, vertical-break moved by insulated transmission rod. Contacts at breaking point and at hinge contact Tangencial contact lines between profiled stationery part and striped end of profiled switch current pad element. Contact Pressure insured by springs. Current path elements made of continuous spacered copper flat bar profils. Hinge stainless-steel axis in PTFE ring bearings housed in the current path tilting blades. Base frame support made of formed hot galvanized steel sheet. Installation can be either horizontally, or vertically, or bottom-up installed. Available choices Post insulators Standard: Epoxy resin cantilever 4 kv - Pollution grade 25mm/kV Upon request higher cantilever and/or pollution grade values Primary terminals Standard: - for 1250 & 2000A horizontal bare copper pad - for 3150A, 4000A, 6300A & 8000A vertical bare copper pad Upon request: - tin plated or silver plated copper pad - horizontal pad for 3150A, 4000A, 6300A & 8000A Operating drives Associated earthing switch Group operated or single pole operated Both manual and motor operation are available (see dedicated catalogues) Ik & tk standard same as disconnector Standard installation: at hinge side Upon request: at stationery side or at both sides Disconnector and earthing switch interlocking Mechanical system fully integrated Earthing switch's operating drives Seismic withstand Mechanical endurance Small current breaking capacity Group operated or single pole operated Both manual and motor operation are available (see dedicated catalogues) Standard: up to 0,2 g (higher values upon request) Standard: 2000 operations (open & close) (higher values upon request) Standard: 0,5 A (for higher values see options hereafter) Optional Rated voltage: Ur 7,5 kv (BIL 60 kv) - 17,5 kv (BIL 95 kv) - 38 kv (BIL 200 kv) Making and breaking capacity for bus-transfer currents (see dedicated catalogues) as per IEC 62271-102 Annex B Breaking capacity for capacitiv and inductive currents (see dedicated catalogue). Breaking device for 6A under Ur D.S. & E.S. interlocking with other apparatuses: Using either combined key lock system, electro-mechanical system (coils), or electrical (relays)
REF. CL/0333/a INDOOR TILT DISCONNECT SWITCH TYPE SBI - Ur: 24 to 36 kv - Outline drawing Type Rated voltage Ur Rated current Ir Ik tk 1 sec. 3 sec. upon request A B C D D' E F G H I J K L M N O P Q mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm Weight (Kg) DS only DS with ES 1250A 31,5 ka 800 335 70 / / / 255 830 475 850 510 510 275 650 260 330 260 300 29 39 SBI INDOOR TILT DISCONNECT SWITCH 24 kv 25,8 36 kv 2000A 31,5 ka 800 335 70 / / / 255 830 485 850 510 510 275 650 260 330 260 300 30 40 3150A 63 ka 800 335 70 295 425 445 255 910 515 850 510 510 225 650 260 330 260 300 41 50 4000A 63 ka 800 335 70 295 425 445 255 910 515 850 510 510 225 650 260 330 260 300 43 52 6300A 63 ka 800 335 70 295 425 445 255 910 515 850 630 630 225 650 260 330 340 380 62 77 8000 A 80 ka 800 335 70 295 425 445 255 910 515 850 630 630 225 650 260 330 340 380 76 90 1250A 31,5 ka 950 360 70 / / / 340 1015 590 1000 630 630 345 800 285 355 260 300 36 47 2000A 31,5 ka 950 360 70 / / / 340 1015 590 1000 630 630 345 800 285 355 260 300 37 38 3150A 63 ka 950 360 70 295 550 530 340 1130 595 1000 630 630 310 800 285 355 260 300 51 61 4000A 63 ka 950 360 70 295 550 530 340 1130 595 1000 630 630 310 800 285 355 260 300 53 63 6300A 63 ka 950 360 70 295 550 530 340 1130 595 1000 630 630 310 800 285 355 260 300 73 88 8000 A 80 ka 950 360 70 295 550 530 340 1130 595 1000 630 630 310 800 285 355 260 300 93 108
REF. CL/0333/a INDOOR DISCONNECT SWITCH TYPE SBI Horizontal erection drawing for rated intensity Ur : 24 kv to 36 kv General features Applicable standard as per IEC 60694 & 62271-102. Products and contracts managed as per ISO 2001 (certified). Routine test and workshop inspection managed as per QA procedure internal document 00DAP01. Packing standard as per SEI specification (European commitee for packaging). Type test reports available upon request.
REF. CL/0334/a Sectionneur sous tunnel Disconnector switch inside tunnel TYPE SST25 Un : 25 kv - BIL 170 kv - In : 2500 A Ik : 31,5 ka - tk : 3s - Ip : 80 ka Applications Pour installation sous tunnel / For tunnel use température ambiante / ambient temperature use : - 25 C / + 40 C. Pour électrification ferroviaire 25 kv - 50 Hz / For railway electrification 25 kv - 50Hz. Systèmes monophasés / Single phase system. Alimentation de caténaires en tunnel / Catenaries feeding in tunnel. Caractéristiques techniques Technical datas Tension nominale / Rated voltage Un : 25 kv Fréquence / Frequency 50 Hz Tenue diélectrique à 50 Hz/1mn (kv eff.) / Rated power frequency withstand voltage 50 Hz/1 mn (kv rms) à la masse / to earth Ua : 70 kv entrée, sortie / accross isolating distance Ua : 80 kv Tenue diélectrique aux ondes de choc (1,2 / 50 µs) / Lightening impulse withstand voltage (1,2 / 50 µs) à la masse / to earth Uni : 170 kv entrée, sortie / accross isolating distance Uni : 195 kv Courant assigné / Rated current Courant de court-circuit assigné / Rated short circuit withstand current Résistance du sectionneur / Main circuit resistance Isolateur synthétique / composite insulator ligne de fuite minimum / minimum creepage distance Plages de raccordement / Terminal pads Nombre d opérations sans maintenance / Number of operating without maintenance Masse d un pôle / One pole weight In : 2500 A Ik : 31,5 ka - tk : 1s - Ip : 80 ka 22 µohm 1100 mm cuivre argenté / silver plated copper 1000 operations 40 kg
REF. CL/0334/a Configurations Position horizontale / Horizontal installation. Installation monopolaire / Single pole installation. Organes de manœuvre du sectionneur et du sectionneur de terre / Disconnector and earthing switch drives motorisé / electrical (EOM) contacts auxiliaires jusqu à 8NO + 8NF / auxiliary contacts up to 8NO + 8NC Plan d encombrement N 33451 Outline drawing N 33451 Règles générales General features Normes / Standards : EN 50152-2 - CEI/IEC 60694 - CEI/IEC 62271-102. Conçu et fabriqué selon procédures ISO 9001 / Designed and manufactured under ISO 9001 Procedures (certified) Conditions d essais de routine et de réception selon document 00DAP01 / Routine test and shop inspection conditions as per document 00DAP01. Rapports d essais de type disponibles sur demande / Type tests reports available on request.
REF. CL/0353/b Center break disconnector IEC 62271-102 standard compliant TYPE SR16200 Ur : 36 to 100 kv - BIL 250 to 450 kv - Ir 3150 A Ik 40 ka - tk : 1s - Ip 104 ka Available choices Post insulators Primary terminals Operating drives Standard: brown glazed porcelain as per IEC 273 C4 (4 kn) - Pollution 25 mm / kv Upon request: CEI 273 C6 (6 kn), Pollution grade 31 mm/kv or as per ANSI TR Type) Standard: copper stud type Upon request either aluminium or copper pad type Group operated or single pole operated Both manual and motor operation are available (see dedicated catalogues) Associated earthing switch can be added at either one, the other, or both sides Standard Ik & tk withstand value 40 ka 1sec Standard installation: parallel to supporting frame Upon request: installation perpendicular to supporting frame Disconnector and earthing switch interlocking Mechanical system fully integrated Earthing switch's operating drives Seismic withstand Ice operation Mechanical endurance Small current breaking capacity Technical description Air disconnect switch, center-break moved by two swiveling post-insulators. Contacts at breaking point and at intake terminal contact. Tangencial contact lines between: Male part made of cylindrical silver plated copper part and Female part made by 2 sets of silver plated copper contact blades Contact Pressure insured by spring-leafs Current path elements made of two continuous spacered copper flat bar profiles Post-insulators swivelling system designed for 90 swivelling movement i.e. Stainless steel axis in double self-lubricant ring bearing (no roll or ball-bearing) housed in an aluminium support body, bolted on the base frame support. Base frame support made of hot galvanized steel rigid profile. Installation Can be either horizontally, or vertically, or bottom-up installed. Group operated or single pole operated Both manual and motor operation are available (see dedicated catalogues) Standard: up to 0,2 g (higher values upon request) Standard: up to 10 mm (20 mm upon request) Standard: 2000 operations (open & close) (higher values upon request) Standard: 0,5 A (for higher values see options hereafter) Optional Making and breaking capacity for bus-transfer currents (see dedicated catalogues) as per IEC 62271-102 Annex B Available for disconnector Ur 72,5 kv) Making & breaking capacity for inductiv currents (see dedicated catalogue). Applicable to E.S. As per IEC62271-102 Annex C. Available for E.S. at and over Ur 72.5 kv Breaking capacity for capacitiv and inductive currents (see dedicated catalogue). Breaking device for 6A under Ur Available for D.S. at and behind Ur 52 kv. D.S. & E.S. interlocking with other apparatuses: Using either combined key lock system, electro-mechanical system (coils), or electrical (relays)
REF. CL/0353/b CENTER BREAK DISCONNECTOR TYPE SR16200 - Ur: 36 kv to 100 kv - Outline drawing Copper stud terminal Ir DIA L Ir DIA L Ir DIA L Upon request, either 3150 A Ø 50 95 2000 A Ø 40 95 1250 A Ø 30 95 aluminium or copper pad type Type Rated voltage Ur Rated current Ir Ik tk 1 sec. Fixation weight per pole R20 C DS with ES Overall dimensions A B C D E F G H J K Weight L Lg Ht mm mm mm N x mm mm mm mm mm mm mini kg µohm mm Kg mm mm mm 3150 A 40 ka 1338 135 50 150 1368 100 kv 2000 A 40 ka 1200 1020 1338 4 x Ø13 700 NA 80 685 1700 125 55 1335 140 1500 550 1368 1250 A 40 ka 1310 125 60 140 1340 3150 A 40 ka 1088 105 40 120 1118 SR16200 72,5 kv 2000 A 40 ka 900 770 1088 4 x Ø13 600 NA 80 535 1300 95 45 890 110 1200 550 1118 1250 A 40 ka 1060 95 50 110 1090 52 kv 36/38 kv 2000 A 40 ka 883 65 35 80 913 700 560 4 x Ø13 400 NA 80 435 1100 780 1100 550 1250 A 40 ka 853 65 40 80 883 2000 A 40 ka 883 65 35 80 913 700 560 4 x Ø13 400 NA 80 435 1000 780 1100 550 1250 A 40 ka 853 65 40 80 883 General features Applicable standard as per IEC 60694 & 62271-102 Products and contracts managed as per ISO 2001 (certified). Routine test and workshop inspection managed as per QA procedure internal document 00DAP01. Packing standard as per SEI specification (European commitee for packaging) Type tests reports available upon request.
CENTER BREAK DISCONNECTOR TYPE SR16200 - Ur: 36 kv to 100 kv Erection drawing for rated voltage REF. CL/0353/b
REF. CL/0354/a Center break disconnector IEC 62271-102 standard compliant TYPE SR16200 Ur : 123 to 245 kv - BIL 550 to 1050 kv - Ir 3150 A Ik 50 ka - tk : 1s - Ip 130 ka Available choices Post insulators Primary terminals Operating drives Standard: brown glazed porcelain as per IEC 273 C4 (4 kn) - Pollution 25 mm / kv Upon request: CEI 273 C6 (6 kn), Pollution grade 31 mm/kv or as per ANSI TR Type) Standard: copper stud type Upon request either aluminium or copper pad type Group operated or single pole operated Both manual and motor operation are available (see dedicated catalogues) Associated earthing switch can be added at either one, the other, or both sides Standard Ik & tk withstand value 40 ka 1sec Standard : installation perpendicular to supporting frame Disconnector and earthing switch interlocking Mechanical system fully integrated Earthing switch's operating drives Seismic withstand Ice operation Mechanical endurance Small current breaking capacity Technical description Air disconnect switch, center-break moved by two swiveling post-insulators. Contacts at breaking point and at intake terminal contact. Tangencial contact lines between: Male part made of cylindrical silver plated copper part and Female part made by 2 sets of silver plated copper contact blades Contact Pressure insured by spring-leafs. Current path elements made of two continuous spacered copper flat bar profiles. Post-insulators swivelling system designed for 90 swivelling movement i.e. Stainless steel axis in double self-lubricant ring bearing (no roll or ball-bearing) housed in an aluminium support body, bolted on the base frame support. Base frame support made of hot galvanized steel rigid profile. Installation Can be either horizontally, or vertically, or bottom-up installed. Group operated or single pole operated Both manual and motor operation are available (see dedicated catalog) Standard: up to 0,2 g (higher values upon request) Standard: up to 10 mm (20 mm upon request) Standard: 2000 operations (open & close) (higher values upon request) Standard: 0,5 A (for higher values see options hereafter) Optional Making and breaking capacity for bus-transfer currents (see dedicated catalogues) as per IEC 62271-102 Annex B. Breaking capacity for capacitiv and inductive currents (see dedicated catalogue). Breaking device for 6A under Ur. D.S. & E.S. interlocking with other apparatuses: Using either combined key lock system, electro-mechanical system (coils), or electrical (relays).
REF. CL/0354/a CENTER BREAK DISCONNECTOR TYPE SR16200 - Ur: 123 kv to 245 kv Outline drawing Copper stud terminal Ir DIA L Ir DIA L Ir DIA L Upon request, either 3150 A Ø 50 95 2000 A Ø 40 95 1250 A Ø 30 95 aluminium or copper pad type Type Rated voltage Ur Rated current Ir Ik tk 1 sec. Fixation Weight per pole R20 C DS with ES overall dimensions A B C D E F G H J K Weight L Lg Ht mm mm mm mm mm mm mm mm mm mini kg µohm mm Kg mm mm mm 245 kv 3150 A 50 ka 2800 480 40 520 2500 2300 8 x Ø18 2700 200 200 1400 4000 2710 2000 A 50 ka 2800 460 70 500 3125 700 2800 SR16200 170 kv 145 kv 3150 A 50 ka 2200 400 35 440 1900 1700 8 x Ø18 2100 200 200 1080 3000 2100 2000 A 50 ka 2200 380 60 420 3150 A 50 ka 1950 280 30 310 1650 1500 8 x Ø18 1850 200 200 950 2600 1880 2000 A 50 ka 1950 260 50 290 2525 700 2200 2275 700 1950 123 kv 3150 A 50 ka 1670 220 30 250 1650 1220 8 x Ø18 1700 200 200 910 2300 1600 2000 A 50 ka 1670 200 50 230 2125 700 1670 General features Applicable standard as per IEC 60694 & 62271-102 Products and contracts managed as per ISO 2001 (certified). Routine test and workshop inspection managed as per QA procedure internal document 00DAP01. Packing standard as per SEI specification (European commitee for packaging) Type tests reports available upon request.
REF. CL/0354/a CENTER BREAK DISCONNECTOR TYPE SR16200 - Ur: 123 kv to 245 kv Erection drawing for rated voltage