TS8 PLATFORM OF IT CABINETS

Designed With The Utmost In Aesthetics And Functionality... TS8 PLATFORM OF IT CABINETS TS8 Server Cabinets ATTRACTIVE & HIGHLY FUNCTIONAL Server A modernly designed cabinet that features the utmost in strength for virtually any server environment. Design The TS8 server cabinet features modern, attractive aesthetics complete with a highly functional server design. Customers The TS8 server cabinet was designed specifically for the data center where styling and functionality are of equal importance. The TS8 is also right at home in a stand-alone server cabinet application. Applications Universal server cabinets Multiple vendor environments Storage equipment Termination equipment Environments Data centers MDC/IDC Wiring closets Office environments Central offices Co-location and application environments Raised floor environments Hot Buttons Contemporary, sleek appearance Multiple vendor equipment Full line of accessories Family of sizes and styles Excellent heat dissipation Strong frame structure Cost Highly functional, highly styled, value packed, competitively priced server cabinet. TS8 Network Cabinets INNOVATIVE DESIGN & ENHANCED STABILITY Network Ideal for showcase applications, this cabinet features natural ventilation with its perimeter perforated doors. Design The TS8 network cabinets feature a stylish design in a viewing door concept that is clearly part of the same family as the server cabinet. Customers The TS8 network cabinet was designed for applications where a viewing door is desired. This cabinet can be suited into a row of server cabinets too. Applications Networking facilities Termination applications Hubs, routers or other components Partially populated server cabinets Other equipment where high heat loads are not generated Environments Data centers MDC/IDC Wiring closets Office environments Central offices Co-location and application environments Raised floor environments Hot Buttons Contemporary appearance Multiple vendor equipment Full line of accessories Family of sizes and styles Good heat dissipation Strong frame structure Cost Viewing door version of server cabinet that is value priced. 5

TS8 Co-Location Cabinets IDEAL FOR CO-LOCATION Co-Location A set of 1, 2 and 4 door cabinets for hosting or co-location applications. Design The TS8 co-location cabinet offers a feature-rich design including separate cable routings for each individual compartment that are perfectly secure from each other. Customers The co-location cabinet was designed for web hosting centers where clients have access to their cabinets and equipment. Applications Co-location/hosting environments Server and storage equipment Networking/termination equipment Environments Web hosting data centers or other environments where there is a need for individually compartmentalized cabinets Hot Buttons Stylish for showcase applications Security for individual clients Flexibility to host multiple customers and hold multiple types of equipment Protected cable and power paths Range of unique lock and key possibilities Cost Well-engineered enclosure, competitively priced to market. TS8 PC Cabinets MODULAR & PROTECTIVE PC A modular NEMA 12 enclosure that is ideal for factory applications. Design This cabinet offers a variety of configurations that can include either a console style or a separate drawer with integrated mouse pad. The most typical design would have three compartments the top for the monitor, the middle for the keyboard and mouse, and the bottom for the PC. Each compartment can be opened individually, while the others are closed and protected from the environment. Customers This cabinet was designed for customers that have a data application that would require added security or environmental NEMA 12 protection. Applications Monitor, PC, mouse, printer All situations that require stability Protection of sensitive equipment Environments Factory floor Warehouse Distribution center that is less protected from dirt and casual moisture Hot Buttons Need to protect data equipment (PC, monitor, etc) from dirt or moisture NEMA 12 rating standard High equipment protection Cost Feature-rich enclosure, competitively priced for factory floor environments. 6

Now Premiering... THE RITTAL IT TS8 CABINETS Worldwide, Rittal is known as a trendsetter in modern technology packaging. In fact, we hold over 200 patents worldwide, we maintain 300 registered designs and we continuously develop new ideas and innovations on a daily basis. And perhaps nothing displays our innovative spirit like the TS8 enclosure. Based on the high-load bearing capacity design for industrial applications, our IT TS8 provides the utmost in networking and storage requirements. Highest Level Of Strength Innovative Design Shows Through Two-Level Mounting Accessories Galore At the heart of the TS8 enclosure is Rittal's patented 16-fold frame that delivers the utmost in strength and stability. The secret is the continuously welded dual-diamond frame design that delivers over 30% more dimensional stability. Nothing can come close to the innovative design and sleek aesthetics of the IT TS8 enclosure. Whether it is the contemporary door and color selections or the high heat dissipation front door design, the TS8 is at the top of the industry. Achieve dual installation levels by installing system chassis and bars on either the inner or outer levels of the twincolumn profile - or mount on both simultaneously. This optimizes space efficiency and allows for plenty of room for cable management. Top off your TS8 enclosure solution with the latest in applicable accessories. To satisfy your accessorizing needs are sidewalls, tool-less shelves, telescopic slides, power strips, wire ducts and more. Let Rittal help complete your next installation. Effective Thermal Management Top-Notch Monitoring Legacy-Friendly Design Round out your rack solution with a plethora of climate control products. Just as the heat levels have risen in networking enclosures, so too has the incredible need for adequate thermal management. Choose from a wealth of "cool" solutions. Cable Management At Its Best The two installation levels of the TS8 design allow for ideal system cable management or choose from a host of smart accessories to help your particular needs. Now you know what we mean when we say infinite possibilities with the TS8. Achieve top-notch monitoring with the Rittal CMC Multi Control system. Designed for the utmost in system security, the CMC unit can be integrated into the TS8 cabinets in order to provide system monitoring and ensure reliability. The TS8 design features a backwards compatibility element for your ease of mind - the TS can be interconnected with an existing PS enclosure of the same size by using a special baying kit - simple as that! 7

Highly Functional TS-Based Equipment Enclosures... TS8 SERVER CABINETS 42U/80" Cabinet Series (with leveling feet extended) 80" x 24" x 36" (approx) RAL 7035 light grey Cool black without sidewalls 9968599 9968601 with sidewalls 9968598 9968600 80" x 32" x 36" (approx) RAL 7035 light grey Cool black without sidewalls 9968603 9968605 with sidewalls 9968602 9968604 47U/88" Cabinet Series (with leveling feet extended) 88" x 24" x 36" (approx) RAL 7035 light grey Cool black without sidewalls 9968607 9968609 with sidewalls 9968606 9968608 88" x 32" x 36" (approx) RAL 7035 light grey Cool black without sidewalls 9968611 9968613 with sidewalls 9968610 9968612 A perfect complement to the TS8 platform is the TS8 server line-up of cabinets. Highly functional for universal server applications, the TS8 server door boasts over 64% open area for the utmost in heat dissipation. In fact, we have taken years of experience and expertise in the server packaging industry to design this modern, ultra-strength server cabinet just what you need for your stressful server requirements. The cabinet comes with front and rear z shaped server rails to accommodate most components found in the market. The server cabinet can also be suited with the TS network cabinet of the same size. Configuration: 42/47U series Fully perforated front/rear door Comfort handle with pushbutton lock insert, front and rear New style perforated roof with front and rear cable entry Available with or without sidewalls Versions include RAL 7035 light grey and cool black (similar to RAL 9005 black) Leveling feet shipped loose Front/rear z shaped server rails, infinite depth adjustment 50 captive nuts 100 mounting screws Technical Drawings See page 75 80" x 24" x 40" (approx) RAL 7035 light grey Cool black without sidewalls 9968615 9968617 with sidewalls 9968614 9968616 80" x 32" x 40" (approx) RAL 7035 light grey Cool black without sidewalls 9968619 9968621 with sidewalls 9968618 9968620 88" x 24" x 40" (approx) RAL 7035 light grey Cool black without sidewalls 9968665 9968624 with sidewalls 9968622 9968623 88" x 32" x 40" (approx) RAL 7035 light grey Cool black without sidewalls 9968626 9968628 with sidewalls 9968625 9968627 9

Modular Networking Enclosures... TS8 NETWORK CABINETS 42U/80" Cabinet Series (with leveling feet extended) 80" x 24" x 36" (approx) RAL 7035 light grey Cool black without sidewalls 9968630 9968632 with sidewalls 9968629 9968631 80" x 32" x 36" (approx) RAL 7035 light grey Cool black without sidewalls 9968634 9968636 with sidewalls 9968633 9968635 47U/88" Cabinet Series (with leveling feet extended) 88" x 24" x 36" (approx) RAL 7035 light grey Cool black without sidewalls 9968638 9968640 with sidewalls 9968637 9968639 88" x 32" x 36" (approx) RAL 7035 light grey Cool black without sidewalls 9968642 9968644 with sidewalls 9968641 9968643 The revolutionary new TS8 freestanding network cabinet from Rittal is based on the concept design of the industrial TS8 modular cabinet. The network TS8 cabinet features the rigid 16-fold frame combined with extensive configuration flexibility and instant cable management. Topped with a sleek, contemporary design, the TS8 network cabinet is ideal for showcase applications. And check out the cabinet's natural ventilation with the perimeter perforated doors. The cabinet comes with front and rear z shaped rails to accommodate most components found in the market. The network cabinet can be suited with the TS server cabinet of the same size. Configuration: 42/47U series Front door with perforated perimeter and polycarbonate insert Perforated rear door Comfort handle with pushbutton lock insert, front and rear New style perforated roof with front and rear cable entry Available with or without sidewalls Versions include RAL 7035 light grey and cool black (similar to RAL 9005 black) Leveling feet shipped loose Front/rear z shaped server rails, infinite depth adjustment 50 captive nuts 100 mounting screws Technical Drawings See page 76 80" x 24" x 40" (approx) RAL 7035 light grey Cool black without sidewalls 9968646 9968648 with sidewalls 9968645 9968647 80" x 32" x 40" (approx) RAL 7035 light grey Cool black without sidewalls 9968650 9968652 with sidewalls 9968649 9968651 88" x 24" x 40" (approx) RAL 7035 light grey Cool black without sidewalls 9968654 9968656 with sidewalls 9968653 9968655 88" x 32" x 40" (approx) RAL 7035 light grey Cool black without sidewalls 9968658 9968660 with sidewalls 9968657 9968659 10

Multi-Compartment Housings... TS8 CO-LOCATION CABINETS 42U/80" Cabinet Series 80" x 24" x 36" (approx) Number of Rack Units Per RAL 7035 light grey Compartments Compartment 1 42U 7831436 47U/88" Cabinet Series 88" x 24" x 36" (approx) Number of Rack Units Per RAL 7035 light grey Compartments Compartment 1 42U 7831440 88" x 24" x 36" (approx) Number of Rack Units Per RAL 7035 light grey Compartments Compartment 4 10U 7831460 This server cabinet has been specifically engineered for the co-location/web hosting market and is offered in versions with 1, 2 and 4 doors. These multi-compartment cabinets are designed with fully perforated doors front and rear for maximum heat dissipation, 19" server rails front and rear, in addition to separate, fully secured compartments in each compartment for data and power cabling. The cabinet offers the ability to bring the power and data cabling in from the top or from the bottom. Configuration: 42/47U series Fully perforated front and rear doors Comfort handle with lock insert Standard product keyed alike, unique inserts available Cable entry roof with 4 round cable entry holes L shaped server rails, front and rear, infinite depth adjustment 2 and 4 door cabinets come with partition wall installed 2 and 4 door cabinets come with separate routings for data and power cables to each compartment Note: cabinet does not come with additional captive nuts and screws Technical Drawings See pages 77-79 80" x 24" x 40" (approx) Number of Rack Units Per RAL 7035 light grey Compartments Compartment 1 42U 7831438 88" x 24" x 36" (approx) Number of Rack Units Per RAL 7035 light grey Compartments Compartment 2 21U 7831450 88" x 24" x 40" (approx) Number of Rack Units Per RAL 7035 light grey Compartments Compartment 1 42U 7831442 11

NEMA Rated Enclosures... TS8 PC CABINETS 63" Cabinet Series 63" x 24" x 25/33" (approx) Part No. Fold-down shelf series (25" D) 8366100 Fold-down shelf series (33" D) 8368100 63" x 24" x 25"/33" (approx) Part No. Drawer series with sheet steel front (25" D) 8366400 Drawer series with sheet steel front (33" D) Inquire 63" x 24" x 25"/33" (approx) Part No. Fixed console series (25" D) 8366200 Fixed console series (33" D) Inquire ValuePack 63" x 24" x 26" (approx)* Part No. 2400 BTU air conditioner 9968185 115 cfm filter fan with outlet 9968187 The Rittal line of PC enclosures and housings can be used for applications where the computer is permanently installed in a cabinet or where the computer must be rolled around on a mobile base. The functionality and industrial design of these enclosures provide superior ergonomics for optimum user-friendliness. The enclosure is separated with compartments for monitor, keyboard and PC/printer storage. The design provides increased security coupled with NEMA 12 protection in fact, even if one door is opened, the other compartments maintain their environmental integrity. All models offer maximum strength and stability through the welded frame and corner piece design. Also included is a lockable telescoping keyboard drawer with integrated mouse pad. What's more is, this line of PC enclosures is based on the TS8 frame. Therefore, all TS8 accessories can be used with these enclosures to further expand and modify the cabinet to suit your specific needs. Configuration: Pull-out keyboard drawer for all standard keyboards Accommodates monitors up to 24" Ergoform-S handle Three part cable entry plates Rear entry door Integrated mouse pad Technical Drawings See page 80 Accepts TS accessories Note: cabinet does not come with additional captive nuts and screws 63" x 24" x 25"/33" (approx) Part No. Pull-out drawer series (25" D) 8366000 Pull-out drawer series (33" D) 8368000 63" x 24" x 25"/33" (approx) Part No. Control panel with drawer series (25" D) 8366300 Control panel with drawer series (33" D) Inquire ValuePack 63" x 24" x 34" (approx)* Part No. 2400 BTU air conditioner 9968186 115 cfm filter fan with outlet 9968188 * ValuePack configurations are based on a non-modular design with integrated, pre-installed components (climate control, pull-out keyboard/integrated mouse pad, vented shelf, casters with brakes, powerstrip). 12

Technology-Driven Solutions For Your Next IT Application... PS PLATFORM OF IT CABINETS PS Server Cabinets UNIVERSAL SERVER SOLUTIONS Server Demands on server cabinets keep increasing as servers continue to get deeper, heavier and run hotter. Rittal's line of server cabinets are designed to handle these stressful requirements and much more. Design Completely welded, multiple roll-formed, steel frame ensures high stability. Customers End users that are interested in a strong yet attractive server cabinet. Applications Server equipment Show case applications High tech applications High-load bearing capacity Multiple types of equipment Environments Data centers MDF/IDF Wiring closets Office spaces Central office environments Co-location and hosting environments Hot Buttons Unlimited individual solutions with Rittal s modular components and accessories Modern appearance and design with outstanding functionality Answers a wide range of network requirements Component mounting in fixed positions or telescopic positions Can be interconnected in rows or suites Pre-configured solutions based on real world requirements Depth adjustable mounting of 19" and/or metric components Versatile design Cost Highly cost-effective and versatile server cabinet. PS Network Cabinets VERSATILE & STYLISH Network The most versatile modular cabinet available in the market today. Standard in NEMA 12 with NEMA 4 available as an option, the PS easily accommodates a variety of equipment. Design Completely welded, multiple roll-formed, steel frame ensures high stability. Standard system installation holes and extremely large assortments of accessories allow unlimited configurations. Customers End users or consultants that are interested in a cabinet that accepts various types of networking equipment. Applications For all situations that require sturdy and versatile enclosures with stability and increased protection requirements. Network equipment Factory floor Multiple types of equipment Environments NEMA 12 environments Data centers Warehouses MDF/IDF Hot Buttons Versatility in design Competitive cost Sturdy, yet attractive NEMA 12 standard Widest range of accessories Cost PS is the most cost-effective and versatile NEMA 12 solution in the market today. 13

PS Co-Location Cabinets Design Completely welded, multiple roll-formed, steel frame ensures high stability. Standard system installation holes and extremely large assortments of accessories allow unlimited configurations. Customers Users in data centers or web hosting environments where individually secured cabinets are needed. Applications ISP equipment Server equipment High tech applications Environments Data centers Central office environments Co-location/hosting environments Hot Buttons Unlimited individual solutions with Rittal s modular components and accessories Component mounting in fixed positions or telescopic positions Exceptionally sturdy enclosure system Can be interconnected in rows or suites Pre-configured solutions based on real world requirements Depth adjustable mounting of 19" and/or metric components Showcase opportunities Versatile design Cost Highly cost-effective design for the co-location market. PS Seismic/Zone 4 Rated Cabinets IDEAL FOR CO-LOCATION TOUGH DESIGN FOR ZONE 4 Co-Location Rittal is defining the standard for ISP/ASP applications with the versatile and sturdy PS cabinets. Whether your concerns are client security, cooling, wire management, multiple vendor mounting or attractive styling Rittal has the ideal co-location product for you. Zone 4 Rittal offers standard products that have been tested and certified to NEBS GR-63 Core requirements. These cabinets were tested with 1000 lbs installed in the cabinet to simulate the most stringent of network applications. Look to Rittal for smartly-designed Seismic/Zone 4 application products. Design Completely welded, multiple roll-formed, steel frame, reinforced with side cross braces and heavy duty base. The 800mm (32") wide cabinets are also equipped with reinforced L server rails. Customers Users who need a Zone 4 certified cabinet for networking or telco equipment. Applications Server equipment High tech applications Multiple types of equipment Seismic/Zone 4 areas Environments Seismic/Zone 4 environments Hot Buttons Standard PS cabinet advantages (refer to PS server) Reinforced enclosure that has been built and tested to fully comply with stringent seismic requirements Design and configuration to provide solid, stable and sturdy support for rackmounted networking equipment Tested under the most extreme conditions simulating real life seismic activity NEBS GR-63 compliant Zone 4 offered as a standard product Cost Value priced NEBS GR-G3 core seismic certified enclosure. 14

Modular Equipment Enclosures... PS SERVER CABINETS 38U/75" Cabinet Series (with leveling feet extended) Cabinet comes with 3" cable base installed 75" x 24" x 36" (approx) RAL 7035 light grey Cool black without sidewalls 9967541 Inquire with sidewalls 9967542 Inquire Rittal s rugged PS server cabinets are an ideal solution for server applications. The Rittal freestanding server cabinets are based on our patented PS series technology, featuring a standard installation hole system for maximum space utilization. The cabinet s rugged construction offers the highest stability as well as high-load bearing capacity. The PS server is one of the most cost-effective and versatile solutions in the market today. Advantages of the PS server cabinet include the fully perforated front and rear door that provides maximum airflow, a fully perforated roof that allows for cable entry (2 4" round cutouts) and 19" server type rails both in the front and rear for rackmount server applications. This cabinet also allows for maximum space utilization with a depth of 40". Demands on server cabinets keep increasing as servers continue to get deeper, heavier and run hotter. Rittal s line of server cabinets are designed to handle these stressful requirements and much more! Configuration: Fully perforated front and rear doors Perforated roof with 2-4" round cutouts for cable entry Ergoform-S handles with pushbutton lock inserts, front/rear 19" L server rails, front/rear 6 system chassis (3 sets) 3" heavy duty base (only on 75" and 83" high) Bottom corner brackets with casters (only on 88" high) Leveling feet RAL 7035 light grey or cool black (similar to RAL 9005 black) 50 captive nuts 100 mounting screws Cable plates Technical Drawings See page 81 75" x 24" x 40" (approx) RAL 7035 light grey Cool black without sidewalls 9967540 Inquire with sidewalls 9967539 Inquire 15

42U/83" Cabinet Series (with leveling feet extended) Cabinet comes with 3" cable base installed 83" x 24" x 36" (approx) 83" x 28" x 36" (approx) 83" x 32" x 36" (approx) 88" x 24" x 36" (approx) RAL 7035 light grey Cool black without sidewalls 9967543 9967830 with sidewalls 9967544 9967829 RAL 7035 light grey Cool black without sidewalls 9967889 9968169 with sidewalls 9967890 9968170 RAL 7035 light grey Cool black without sidewalls 9967891 9968171 with sidewalls 9967892 9968172 47U/88" Cabinet Series (with leveling feet extended) Cabinet comes with caster plate installed, no cable base 88" x 28" x 36" (approx) 88" x 32" x 36" (approx) RAL 7035 light grey Cool black without sidewalls 9967948 9967950 with sidewalls 9967949 9967951 RAL 7035 light grey Cool black without sidewalls 9967952 9967954 with sidewalls 9967953 9967955 RAL 7035 light grey Cool black without sidewalls 9967956 9967958 with sidewalls 9967957 9967959 83" x 24" x 40" (approx) RAL 7035 light grey Cool black without sidewalls 9967198 9967828 with sidewalls 9967197 9967827 83" x 28" x 40" (approx) RAL 7035 light grey Cool black without sidewalls 9967893 9968173 with sidewalls 9967894 9968174 83" x 32" x 40" (approx) RAL 7035 light grey Cool black without sidewalls 9968343 9968345 with sidewalls 9968344 9968346 88" x 24" x 40" (approx) RAL 7035 light grey Cool black without sidewalls 9968353 9968359 with sidewalls 9968354 9968360 88" x 28" x 40" (approx) RAL 7035 light grey Cool black without sidewalls 9968355 9968361 with sidewalls 9968356 9968362 88" x 32" x 40" (approx) RAL 7035 light grey Cool black without sidewalls 9968357 9968363 with sidewalls 9968358 9968364 16

High Protection, Modular Network Housings... PS NETWORK CABINETS 24U/49" Cabinet Series 49" x 24" x 24" (approx) RAL 7035 light grey Cool black without sidewalls 9967601 Inquire with sidewalls 9967600 Inquire 49" x 32" x 32" (approx) RAL 7035 light grey Cool black without sidewalls 9967605 Inquire with sidewalls 9967604 Inquire The Rittal freestanding NEMA 12 network cabinets are based on Rittal s patented PS Series technology, featuring a standard installation hole system for maximum space utilization. The cabinet s rugged construction offers high stability as well as high-load bearing capacity. Components are visible through the viewing door and are fully accessible from all sides through front/rear doors and removable sidewalls. Rittal s PS cabinets are available in our most popular sizes with standard accessories. Configuration: Smoked polycarbonate front viewing door Steel rear door Removable locking sidewalls Ergoform-S handles with pushbutton lock inserts, front and rear Removable solid roof Bottom cable entry panels 19" DK PS rails, front and rear 1 set of system chassis Mounting brackets, top and bottom 50 captive nuts 100 mounting screws RAL 7032 pebble grey or cool black (similar to RAL 9005 black) Technical Drawings See page 82 49" x 24" x 32" (approx) RAL 7035 light grey Cool black without sidewalls 9967603 Inquire with sidewalls 9967602 Inquire 17

38U/73" Cabinet Series 73" x 24" x 24" (approx) RAL 7035 light grey Cool black without sidewalls 9967607 Inquire with sidewalls 9967606 Inquire 73" x 32" x 32" (approx) RAL 7035 light grey Cool black without sidewalls 9967611 Inquire with sidewalls 9967610 Inquire 42U/80" Cabinet Series 80" x 24" x 24" (approx) RAL 7035 light grey Cool black without sidewalls 9967613 Inquire with sidewalls 9967612 9967695 80" x 32" x 32" (approx) RAL 7035 light grey Cool black without sidewalls 9967617 Inquire with sidewalls 9967616 9967696 47U/87" Cabinet Series 87" x 24" x 24" (approx) RAL 7035 light grey Cool black without sidewalls 9967619 Inquire with sidewalls 9967618 Inquire 87" x 32" x 32" (approx) RAL 7035 light grey Cool black without sidewalls 9967623 Inquire with sidewalls 9967622 Inquire 73" x 24" x 32" (approx) RAL 7035 light grey Cool black without sidewalls 9967609 Inquire with sidewalls 9967608 Inquire 80" x 24" x 32" (approx) RAL 7035 light grey Cool black without sidewalls 9967615 Inquire with sidewalls 9967614 9967694 87" x 24" x 32" (approx) RAL 7035 light grey Cool black without sidewalls 9967621 Inquire with sidewalls 9967620 9967697 18

Ideal For Technology-Driven Applications... PS CO-LOCATION CABINETS 42U/82" Cabinet Series 82" x 24" x 36" (approx) Number of Rack Units Per RAL 7035 Cool black Compartments Compartment light grey 1 42U 9967544 9967829 82" x 24" x 36" (approx) Number of Rack Units Per RAL 7035 Cool black Compartments Compartment light grey 3 12U 9967659 9968295 Many businesses today are experiencing tremendous growth due to the explosion of the internet, thanks to the wealth of information, products, services and contacts obtained. Just as internet usage has grown, so does the need to safeguard and maintain the equipment for this powerful communications tool. Rittal s new Internet Service Provider enclosure line will provide you with smart, efficient and stylish network solutions for your next client application. Based on our PS enclosure body, the internet service enclosure features fully perforated front/rear doors that offer maximum airflow as well as our patented Ergoform-S handles with security inserts for increased security. Climate control issues can be addressed with a 440cfm roof fan assembly mounted to rear door and a temperature indicator for continuous thermal management. Rittal s co-location cabinets can provide you with a viable solution to maintain and manage internet data equipment. Configuration: 1, 2, 3 and 4 door configurations with partition shelves Perforated roof with 1 (4" x 3") cable entry cutout with adjustable cover plate and 2 (9" x 3/4") cable duct entry cutouts on sides Cable ducts (top and bottom feed) 19" L server rails, front/rear Ergoform-S handles, front/rear, with security insert Perforated front and rear doors 3" heavy duty base Leveling feet System chassis (4 per compartment) Technical Drawings See pages 83-86 50 captive nuts 100 mounting screws RAL 7035 light grey or cool black (similar to RAL 9005 black) 82" x 24" x 32" (approx) Number of Rack Units Per RAL 7035 Cool black Compartments Compartment light grey 2 19U 9967658 9968294 82" x 24" x 32" (approx) Number of Rack Units Per RAL 7035 Cool black Compartments Compartment light grey 4 8U 9967660 9968296 19

High Levels Of Shock And Vibration Protection With... PS SEISMIC/ZONE 4 RATED CABINETS 38U/75" Cabinet Series 75" x 24" x 36" (approx) Part No. with sidewalls 9967632 42U/83" Cabinet Series 83" x 24" x 36" (approx) Part No. with sidewalls 9967634 With the explosion of high tech networking equipment deployed all over the world, many companies are seeing that equipment is being exposed to more and more hostile environments. One of the more demanding environments is any place there is a chance for seismic activity. The areas that are most susceptible to seismic activity have been identified as Zone 4. This family of cabinets has been independantly tested to the seismic requirements of NEBS GR-G3 Core with 1000 lbs of weight mounted on the 4 rails. Rittal now offers a stylish enclosure that has been built and tested, to fully comply with these stringent requirements. These enclosures offer a fully perforated front and rear door for visibility, security and good air movement. In addition, front and rear server style angles are mounted off of three sets of systems chassis to provide solid, stable support for rack mounted networking equipment. If you have an application that demands a strong, stable enclosure choose one of Rittals new Zone 4 certified cabinets. Configuration: Perforated front and rear doors Ergoform-S locking handles with pushbutton lock inserts Front and rear 19" L server rails mounted off 3 sets of systems chassis (Zone 4) Rugged Zone 4 cable base Zone 4 cross braces Perforated roof with 2-4" round cutouts for cable entry 50 captive nuts 100 mounting screws RAL 7035 light grey Technical Drawings See page 87 75" x 32" x 36" (approx) Part No. with sidewalls 9967633 83" x 32" x 36" (approx) Part No. with sidewalls 9967661 20

Featuring Quick, Easy And Functional... QUICKRACK PLATFORM OF IT CABINETS QuickRack Server Racks BASIC EQUIPMENT Server A rugged server cabinet that offers style and strength, all at a low cost. Design Fully welded four-post roll form design, with a safety glass viewing window and perimeter venting. Customers Users, school districts or installers that are price sensitive. Applications A simple design for the server environment, suitable for: Server equipment Termination equipment Network equipment Environments Data centers Office spaces MDF/IDF Wiring closets Hot Buttons Cost-efficient Quick delivery Value solution Rugged design QuickRack ValuePack Cabinets VERSATILE & COST-EFFECTIVE ValuePack A cost-effective termination cabinet that offers superior styling with low prices. Design A fully assembled four-post cabinet that has a safety glass front viewing door and a vented sheet steel rear door. Customers Users, school districts and installers that are on a tight budget. Applications An attractively styled product for light duty termination applications. Environments Data centers School buildings Wiring closets MDF/IDF Hot Buttons Cost-efficient Fully assembled Quick delivery Simple design QuickRack PowerPack Cabinets ATTRACTIVE SUPERIOR STYLING PowerPack A cost-effective versatile cabinet that combines superior styling with low prices. Design A cost-effective termination cabinet that offers superior styling preconfigured with a fan and a power strip and coupled with low prices. Customers Users, school districts and installers that want the convenience of a preconfigured cabinet, yet are on a tight budget. Applications Attractively styled product for light duty termination applications that require power and some active cooling. Environments Data centers School buildings Wiring closets MDF/IDF Hot Buttons Cost-efficient Fully assembled Quick delivery Simple design Power strip preinstalled 21

Assembly Friendly Solutions With... QUICKRACK SERVER RACKS 41U/79" Cabinet Series 79" x 24" x 36" (approx) RAL 7035 Cool black light grey without sidewalls 7528900 Inquire with sidewalls Inquire 7528950 The QuickRack server cabinet features a smart mass storage design coupled with basic functionality and versatility. The enclosure comes standard with a safety glass viewing door with perimeter venting in the front for increased heat dissipation. In addition, the cabinet is mounted on a mobile base with an integrated pull-out anti-tip plate that allows for safe and easy equipment assembly, viewing and maintenance. For the utmost in server cabinets, look to the QuickRack server enclosures. Configuration: Front safety glass viewing door with perimeter venting Rear vented sheet steel door 19" L server rails, front and rear 3 sets of front and rear system chassis Locking handle front/rear Integrated leveling feet pre-installed 4 transport casters, pre-installed Note: cabinet does not come with captive nuts and screws Technical Drawings See page 88 22

Value-Packed Network Housings With... QUICKRACK VALUEPACK CABINETS 24U/49" Cabinet Series 49" x 24" x 24" (approx) RAL 7035 light grey without sidewalls 7503770 with sidewalls 9967140 42U/80" Cabinet Series 80" x 24" x 24" (approx) RAL 7035 light grey without sidewalls 7503778 with sidewalls 9967138 80" x 32" x 32" (approx) RAL 7035 light grey without sidewalls 7503781 with sidewalls 9967135 88" x 24" x 32" (approx) RAL 7035 light grey without sidewalls 7503783 with sidewalls 9967133 Rittal offers a variety of QuickRack cabinets in the most popular configurations for the networking market. Heights range from 24 to 47U and include a choice of widths and depths. These standard cabinets come packed full of features that make the cabinet an easy to work with solution for many network applications. For quick availability, easy transportation and innovative design, look no further than the QuickRack ValuePack. Configuration: Front safety glass viewing door with lock insert Vented rear steel door with lock insert Full height 19" DK rails, front and rear Cable entry roof with brush insert Two sets of horizontal rail supports Leveling feet Available with or without sidewalls 50 captive nuts 100 mounting screws RAL 7035 light grey Technical Drawings See page 89 49" x 32" x 32" (approx) RAL 7035 light grey without sidewalls 7503773 with sidewalls 9967139 80" x 24" x 32" (approx) RAL 7035 light grey without sidewalls 7503779 with sidewalls 9967137 88" x 24" x 24" (approx) RAL 7035 light grey without sidewalls 7503782 with sidewalls 9967134 88" x 32" x 32" (approx) RAL 7035 light grey without sidewalls 7503785 with sidewalls 9967131 23

Get The Rittal Power From... QUICKRACK POWERPACK CABINETS 24U/49" Cabinet Series 49" x 24" x 24" (approx) RAL 7035 light grey without sidewalls 9966978 with sidewalls 9966977 42U/80" Cabinet Series 80" x 24" x 24" (approx) RAL 7035 light grey without sidewalls 9966972 with sidewalls 9966971 80" x 32" x 32" (approx) RAL 7035 light grey without sidewalls 9966976 with sidewalls 9966975 47U/88" Cabinet Series 88" x 24" x 32" (approx) RAL 7035 light grey without sidewalls 9966968 with sidewalls 9966967 For a more advanced network cabinet offering, get the QuickRack PowerPack. The PowerPack offering combines the value-packed QuickRack cabinet with two exciting features: an eight outlet power strip and a fan tray for air movement within the cabinet. Add to that the advantages of the cabinet itself cost-efficiency, accessibility and easy transition of applications and you ll get the power from QuickRack. Configuration: Front safety glass viewing door with lock insert Vented rear steel door with lock insert Full height 19" DK rails, front and rear Two sets of horizontal rail supports Roof with fan tray (2 fans on 24" W, three fans on 32" W), 9' cord/plug 8 outlet, 15 amp power outlet strip Leveling feet Available with or without sidewalls 50 captive nuts 100 mounting screws RAL 7035 light grey Technical Drawings See page 89 49" x 32" x 32" (approx) RAL 7035 light grey without sidewalls 9966980 with sidewalls 9966979 80" x 24" x 32" (approx) RAL 7035 light grey without sidewalls 9966974 with sidewalls 9966973 88" x 32" x 32" (approx) RAL 7035 light grey without sidewalls 9966970 with sidewalls 9966969 24

Cabinet Accessories... SHELVES Tool-Less Shelves Heavy Duty Tool-Less Shelves NEW! These 19" rackmount shelves are designed for your ease the tool-less advantage allows quick and simple assembly. Vented Component Shelves (With 19" Rail Mounting) Can be installed in two ways: 1. In fixed position, or 2. Fully extendable on telescopic slides. Each enclosure type requires its own specific installation kit corresponding with its width and depth. Configuration: Component shelf including installation hardware Sheet steel Painted RAL 7035 light grey or RAL 7032 pebble grey Solid or slotted to prevent heat build-up (slots accommodate DK 7115000 positioning studs) Note: Designed to mount on DK rails, found in PS network and QR cabinets. If mounted in TS or PS servers, part number 7063850 brackets are needed. * Only for 800mm deep enclosures. ** Use suffix.035 when ordering RAL 7035 light grey component shelves. *** Installation kits not included 7796000 or 7798000 for standard shelves 4371000 or 4372000 for heavy duty shelves. Refer to shelf selection guide, pages 97-98. NEW! These 19" heavy duty rackmount shelves are designed for your ease. The tool-less advantage allows quick and simple assembly. Component Shelves (Without 19" Rail Mounting) For installation in enclosures that do not have 19" rails. Depth of shelf should not exceed enclosure depth minus (-) 3.94"/100mm. Available in two versions: max. load capacity: 110 lbs/50 kg max. load capacity: 220 lbs/100 kg Can be installed in two ways: 1. Permanently fixed, or 2. Fully extendable on optional telescopic slides. Mounting Color Part No. Fixed RAL 7035 9968421 Fixed Cool black 9968422 Dimensions inches mm 16 x 12 409 x 300 7143000 16 x 16 409 x 400 7144000 16 x 20 409 x 500 7145000 16 x 24 409 x 600 9960935 Load capacity: 110 lbs/50 kg TS PS QR Mounting Color Part No. Fixed RAL 7035 9968556 Fixed Cool black 9968557 Telescopic RAL 7035 9968586* Telescopic Cool black 9968587* *Inquire TS PS QR TS PS QR Color: RAL 7032 pebble grey or RAL 7035 light grey** Configuration: component shelf including installation hardware*** sheet steel, 16/14 ga (1.5"/2mm) solid or slotted to prevent heat build-up (slots accommodate DK 7115000 positioning studs) can be mounted and adjusted in 0.98"/25mm increments mounting holes for handle 220 lbs/100 kg version is 1.77"/45mm high Vented component shelves for fixed or extendable mounting on enclosure frame Max. load Shelf W x D 110 lbs/50 kg 220 lbs/100 kg For encl. width inches mm 24"/ 18.54 x 15.75 471 x 400 7164000 7464000 600mm 18.54 x 19.68 471 x 500 7165000 7465000 18.54 x 23.62 471 x 600 7166000* 7466000* 32"/ 26.42 x 15.75 671 x 400 7184000 7484000 800mm 26.42 x 19.68 671 x 500 7185000 7485000 26.42 x 23.62 671 x 600 7186000* 7486000* TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 25

19" Component Shelf 2U Installation Kit For Component Shelves Handle For Component Shelves A convenient solution for when only one 19" mounting surface is available. Static load capacity: 55 lbs/25 kg Material: sheet steel Color: RAL 7032 pebble grey or RAL 7035 light grey Can be installed: In enclosure between 19" rails In swing frames with special 19" angles In vented component shelves with 19" rail mounting Material: sheet steel Color: RAL 7035 light grey Mounting a component shelf directly to the enclosure frame requires an installation kit that matches the enclosure depth. This makes it possible to install 18.54"/26.42" (471/671mm) wide component shelves in 23.62"/31.50" (600/800mm) wide enclosure frames for use without 19" rails. Material: sheet steel, zinc-coated, chromated Configuration: 2 mounting angles, installation hardware Handles are die-cast zinc, painted. Includes installation hardware. All component shelves have mounting holes for handles. Width x depth RAL 7032 RAL 7035 15.35" x 11.31"/ 7148000 7148035 390mm x 300mm 15.35" x 16"/ - 7119400 390mm x 400mm For installation in fixed position or on telescopic slides inches mm W D W D 15.35 9.84 390 250 7119250 15.35 11.81 390 300 7148035 15.35 15.75 390 400 7119400 Vented component shelves (with 19" rail mounting) inches mm W D W D 16 16 406 406 7144035 16 20 406 508 7145035 TS PS QR Enclosure depth Packs of 24"/600mm 2 7526970 32"/800mm 2 7526975 TS PS QR Packs of Part No. VS 2 3636010 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 26

Telescopic Slides For Component Shelves Sides are fully extendable, and can also be easily retrofitted to convert fixed shelf into sliding shelf. Available in two versions: max. load capacity: 110 lbs/50 kg max. load capacity: 220 lbs/100 kg Technical description: Installation adjustable in.98"/25mm increments 2-stage extension Material: sheet steel, zinc-coated, chromated 19" Keyboard Drawer 2U, For All Enclosures With A 19" Mounting Surface 42U PS Expansion Kit Fits desktop, wallmount and freestanding enclosures with a 19" mounting surface. For up to 16.9"/430mm wide keyboards. Technical description: lockable keyboard drawer with handles, fold-down front, pull-out mouse pad, practical cable entry and strain relief Material: sheet steel with aluminum front Color: RAL 7032 pebble grey or RAL 7035 light grey For 2000 H x 600mm W PS cabinets. Designed to provide additional depth to house cables. Install by removing the rear door and mounting hardware, then install the kit and reattach the hardware and door. Configuration: 2 slide rails Color: RAL 7035 light grey For shelf Packs depth of max. load capacity 110 lbs 50 kg 220 lbs 100 kg 12"/300mm 1 set 7051000-16"/400mm 1 set 7061000 7064000 20"/500mm 1 set 7081000 7065000 24"/600mm 1 set 7161000 7066000 TS PS QR Color RAL 7032 7281000 RAL 7035 7281035 Installation depth: 390mm TS PS QR Packs of Part No. PS 1 9968482 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 27

Cabinet Accessories... SUPPORT RAILS/BRACKETS Support Rails Heavy Duty Telescopic Brackets 19" Support Rails HP Mounting Rail System Chassis With Mounting Flanges Rails hang in sides of 19" rails to support heavy 19" rack-mounted components. Material: sheet steel, zinc-coated, chromated Configuration: 2 slide rails Note: Can be used with PS Networking & QuickRack networking cabinets. Telescopic bracket that mounts to the front and rear 19" angles. Designed to support components from underneath rated at 200 lbs. Material: chromeplated steel Configuration: 1 set of slide brackets plus mounting hardware These rails can be installed in all network cabinets that have two 19" mounting surfaces. Server or active network components can easily be inserted in any type of network cabinet. The length of the support rails is infinitely adjustable between 22" - 34"/550-850mm. Material: sheet steel, zinc-coated, chromated Configuration: 2 infinitely adjustable support rails 42U rail that mounts behind L-shaped rail to provide mounting surface found in the HP cabinet. This rail mounts 32.5mm behind the L EIA rail to emulate the HP profile. Configuration: 4 vertical 42U rails plus mounting hardware 9" x 2.9" (23 x 73mm) for intermediate mounting of 19" rails or T-slot rails, simply hook in cabinet frame and secure. Length Packs of 5.98"/152mm 2 7063000* 10.28"/261mm 2 7063300 14.21"/361mm 2 7063400 18.15"/461mm 2 7063500 *Can only be mounted to front or rear rails. TS PS QR Telescopic bracket 9968666 TS PS QR Support rails Packs mm of 550-850 2 7063850 TS PS QR HP mounting rail 9968545 TS PS QR Packs of For enclosures Part No. TS Width mm Depth mm 4 600 600 8612060 4 600 800 8612080 4 600 900 8612090 4 800 600 7827600 4 800 800 7827800 4 800 900 7827900 4 800 1000 7827000 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 28

System Chassis With Mounting Flanges Mounting Rail 19" Rails Cable Clamps Cable Clips.9" x 2.9" (23 x 73mm) for intermediate mounting of 19" rails or T-slot rails, simply hook in cabinet frame and secure. For use with 32" wide (800mm) PS cabinets only. Bracket to move 19" rails to 23" or 24" width. Material: sheet steel Finish: zinc-coated, chromated Note: for 32" W PS network cabinets only Rails can be depth-variable installed on depth bars for easy mounting of 19" components. Material: sheet steel, zinc-coated, chromated Configuration: 2 rails, includes installation hardware Cabinet Accessories... GENERAL CABLE MANAGEMENT For cable collecting C-rails, includes plastic sleeves. Material: sheet steel, zinc-coated, chromated Configuration: packs of 25 Securely keep wires and conduits straight. Easy fastening: By simply clipping into installation holes of 23 x 23mm systems bars By fastening with M5 x 12mm screws (Part No. SZ 2488000) into round installation holes of PS frame profiles or all system bars and chassis. With only two screws several clips of even different sizes can be arranged in a row. Material: polyamide Configuration: packs of 50 Cabinet depth Packs of Part No. PS 24"/600mm 4 4371000 32"/800mm 4 4372000 36"/900mm 4 9967817 40"/1000mm 4 9967655 TS PS QR Packs of 2 9963241 TS PS QR U SU Enclosure height 24 43 47.24"/1200mm 7526350 42 75 78.74"/2000mm 7526370 47 83 88.61"/2200mm 7526380 TS PS QR For cable diameter inches mm 0.24 0.55 6 14 7077000 0.47 0.71 12 18 7078000 0.71 0.87 18 22 7097000 1.50 1.65 38 42 7098000 2.20 2.52 56 64 7099000 TS PS QR For cable diameter Part No. PS from - to inches mm.24 to.35 6 to 9 4319090.35 to.47 9 to 12 4319120.47 to.63 12 to 16 4319160.63 to.79 16 to 20 4319200 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 29

Cable Ties Provide a quick solution to the problem of attaching small cable harnesses onto a frame. Simply clip into the standard installation holes. Length Packs of Part No. SZ 6"/150mm 100 2597000 Hinged Cable Carrier Velcro Cable Straps Cable Guides For Fiber Optic Cable 1 2 For component shelves on telescopic slides and for printer carriages. Prevents cables from sagging and kinking. Includes installation hardware. Material: sheet steel, zinc-coated, chromated Makes cable management even easier because access to cables is unlimited and can be added or removed at will. The straps can be attached to cable collecting rails, C-rails, system rails or the enclosure frame. They can also be screwed to the standard installation holes in the enclosure frame with SZ 2486000 BZ 5.5 x 13mm screws. Color: black Made of two types of plastic: hard on the outside for secure mounting and to ensure stability and soft on the inside to provide a safe bed and strain relief for fiber optic cables. Grooves on the inside accept fibers and jumper cables with different diameters while a rubber strap holds the cables in place. Its special design ensures strain relief and bending radius. For fiber Ø up to.18"/4.5mm. Length: 4.72"/120mm Color: outside: RAL 7035 light grey inside: black Configuration: 2 cable guides; 2 rubber straps; interconnecting kit; installation hardware TS PS QR Cable carrier 7163500 TS PS QR Width Length Max Packs Part No. cable of DK Ø.62"/ 5.12"/ 1.18"/ 10 7072220 16mm 130mm 30mm.62"/ 7.87"/ 1.97"/ 10 7072230 16mm 200mm 50mm.62"/ 11.81"/ 3.54"/ 10 7072240 16mm 300mm 90mm TS PS QR Packs of 2 7116500 Installation: The mounting brackets (included) can be installed anywhere, and fiber optic cables can be directed toward a patch panel in any direction from any mounting location: 1 on the side, on the patch panel 2 on the front of the patch panel 3 on the side, next to the patch panel 4 on the back of the patch panel Cable guides can also be put in a row. 3 4 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 30

Flexible Cable Conduit And Cable Conduit Clips Cable Guide Rings, Metal Cable Loop Bundle Retainer Bend Radius Control Clip The perfect way to route cables from enclosure or mounting panel to door. No drilling necessary cable conduit clips snap into standard and 19" system installation holes. Material: cable conduit: polyethylene cable conduit clip: polyamide For flexible and systematic cable routing on cross connect rails and in cross connect enclosures or on the side of 19" rails. Material: steel, zinc-coated, chromated Configuration: includes stop and installation hardware German Patent No. 38 13 002 Holds large collection of cables. Mounts on the sides of 19" rails in 31.50"/800mm wide network cabinets. Material: round steel, zinc-coated, chromated Configuration: cable loop with installation hardware Supports cable in vertical or horizontal configurations. Mounts with rubber adhesive and/or screws. Maximum bundle capacity: 2"/50.8mm. Provides cable bend radius control and facilitates patch cable routing to and from horizontal cable management panels. Mounts directly to 19"/23" EIA standard communication racks or cabinets (2U). Cable Conduit Ø Length Part No. SZ 1.14"/29mm 82 ft/25m 2589000 1.89"/48mm 82 ft/25m 2590000 Cable Conduit Clips For cable Packs Part No. SZ conduit Ø of 1.14"/29mm 20 2591000 1.89"/48mm 20 2592000 Cable conduit clips: US Patent No. 4,779,828 German Patent No. 37 60 110 Europe Patent No. 37 60 110 valid for AT, BE, CH, DE, ES, FR, GB, IT, NL, SE TS PS QR Dimensions Packs of mm 120 x 90 10 7111900 120 x 60 10 7111000 80 x 40 10 7112000 TS PS QR Dimensions mm 300 x 90 7220000 TS PS QR Packs of 6 9968317 TS PS QR Packs of 1 9968318 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 31

Cable Management Bracket ( D Ring) Plastic vertical D ring. Allows open access to cable bundles. Width Packs of 1" 6 9968319 2" 6 9968320 Communication Cable Management Kit TS Wire Ducts A kit of wire management accessories specifically designed for use in a network cabinet. Kit includes: TAK-TY cable tie (1 roll). Nylon cable ties (24 pcs), adhesive backed mounts (ABM3H-A and ABM112-A; (6 pcs each), flat post standoff (8 pcs), push mount (6 pcs) and vertical wire saddle (4 pcs). In two versions for the direct installation onto the vertical enclosure profile. Width 2"/50mm, for installation into the vertical profile at the sidewalls. Width 4"/100mm, for installation into two suited profiles at the seam. Interconnecting brackets and quick connect brackets can be covered with the cable channel. 3.25"/80mm deep horizontal DIN channels meet flush when the mounting panel is located in its most rear position. The perforations of the pegs are also designed to be compatible with other commercial ducts. Another perforation at the level of the mounting panel allows for a direct entry into the cable channel. The wire duct connections are designed to meet the TS 1"/25mm hole pattern, thus eliminating cumbersome drilling as is needed with other ducts. TS PS QR Packs of 1 9968321 TS PS QR Height in Width in PU Part No. inches/mm inches/mm 63/1600 2/50 8 set 8800570 71/1800 2/50 8 set 8800520 63/1600 4/100 4 set 8800540 71/1800 4/100 4 set 8800510 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 32

Cabinet Accessories... HORIZONTAL CABLE MANAGEMENT Cable Collecting C-Rails Cable Management On 19" Mounting Surfaces Combination Cable Collecting Rails Includes installation hardware. Material: sheet steel, zinc-coated, chromated Configuration: packs of 6 US Patent No. 5,052,565 German Patent No. 39 30 161 GB Patent No. 2 651 654 Italian Patent No. 0 124 3002 Different cable collecting rails are available to provide orderly cable management in 19" systems: C-rails that can be installed between all 19" mounting surfaces. Cable collecting rails to which cables are fastened with cable ties, and that can be installed between all 19" mounting surfaces. Spring cable collecting bars for PS and TS system rails to which cables are fastened with cable ties, and that have hooks on side that hang in 19" rails. These rails make it possible to fasten cables with cable clamps or cable ties and also allow equipotential bonding between the cable shield and ground bus. Material: aluminum, zinc-coated, chromated Configuration: combination rail, installation hardware For installation in enclosure depth D L D L inch inch mm mm 16 11.42 400* 290 7091000 20 15.35 500 390 7092000 24 19.29 600** 490 7095000 31 27.17 800 690 7096000 For installation in enclosure width W L W L inch inch mm mm 39 35.43 1000 900 7100000 47 43.31 1200 1100 7102000 TS PS QR C-rails Depth 19" mounting surface - 7016100 Cable collecting rails Depth 19" mounting surface - 7016110 Cable collecting Depth Part No. bars for DK PS system rails 4"/ 7016130 100mm TS PS QR For Mounting in Enclosure Depth For Packs of enclosure depth 23.62"/ 600mm 2 7526940 31.50"/ 800mm 2 7526945 For Mounting in Enclosure Width For Packs of enclosure width 23.62"/ 600mm 2 7526930 31.50"/ 800mm 2 7526935 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 33

Cable Collecting C-Rails Cable Collecting Strip 19" Cable Trough 19" Cable Entry Panel Cables can be neatly routed with cable ties along the side or rear of network cabinets. Material: sheet steel, zinc-coated, chromated Configuration: 6 cable collecting rails with installation hardware Mounted directly to patch panels with bolts to provide strain relief for wiring to and from patch panels. Available with and without spring clamps for fastening and grounding the cable shield. Material: 14 ga/2mm sheet steel, chromated Configuration: 1 cable collecting strip and installation hardware For cable collection. Depth: 3.37"/85mm Material: sheet steel Color: RAL 7035 light grey Available in 2U (with a 390 x 40mm opening) or 1U (with a 390 x 20mm opening). Has edge protector and brush insert to protect against dust. Accepts DK 7610000 or DK 7611000 cable collecting strips, see above. Material: sheet steel Color: RAL 7035 light grey For installation in enclosure depth For Enclosure Packs Part No. enclosure depth of DK PS 24"/ 6 7010060 600mm PS 31"/ 6 7010080 800mm For installation in enclosure width For Enclosure Packs Part No. enclosure depth of DK PS 24"/ 6 7010600 600mm PS 31"/ 6 7010800 800mm TS PS QR Version Without cable shield 7610000 grounding With spring clamps 7611000 for cable shield TS PS QR U 1 7149135 3 7149035 TS PS QR U 1 7140535 2 7150535 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 34

19" Routing Panel 2U 19" Routing Panel 1U With holes on top to allow entry of patch cables. The front features a hinged lid with quick locks to allow optimum access to cables. Cables enter the panel from the rear through a cutout with brush insert. Accepts DK 7610000 or DK 7611000 cable collecting strips. Depth: 3.35"/85mm Material: sheet steel Features 5 cable guides to route patch cables horizontally. Material panel: sheet steel Material cable guides: polyamide Color: RAL 7035 light grey Dimensions: 2.76" x 1.73"/70 x 44mm 19" Horizontal D-Ring Panel For Front And Rear Cable Management 2U Includes pre-assembled D-rings on front and rear. Front D-ring size: 3" x 3"; rear D-ring size: 3" x 5". Color: black 19" Horizontal D-Ring Panel For Front Cable Management 2U Includes pre-assembled D-rings on front only. Front D-ring size: 3" x 3". Color: black 19" Horizontal Panel For Front And Rear Cable Management 2U Includes 3" x 3" duct on front, 2" x 5" duct on rear, 2 bend radius control clip, 12-24 mounting screws, 3 wire retainers and front and rear covers. Total width: 20.18"/512.7mm. Color: black U 2 7158035 TS PS QR U 1 7159035 TS PS QR Packs of 1 9968322 TS PS QR Packs of 1 9968323 TS PS QR Packs of 1 9968324 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 35

19" Horizontal Panel For Front Cable Management 2U Cable Management Rail Cable Routing Duct Includes 3" x 3" duct on front, 2 bend radius control clip, 12-24 mounting screws, 3 wire retainers and front cover. Total width: 20.18"/512.7mm. Color: black 19" Horizontal Panel For Front And Rear Cable Management 1U Includes 1.5" x 3" front duct, 1" x 4" rear duct and 12-24 mounting screws. Color: black 19" Horizontal Panel For Front Cable Management 1U Includes 1.5" x 3" front duct and 12-24 mounting screws. Color: black Cabinet Accessories... VERTICAL CABLE MANAGEMENT Provides spacious possibilities for cable ties, velcro strips and cable rings. Easy installation simply secure with screws to system chassis or cabinet frame. Material: sheet steel Color: black Size: 1790 x 50mm Makes cable routing on side of cabinet possible. The cable routing duct is mounted on the side of a Data Rack or on the 19" rails in a 31.50"/800mm wide PS network cabinet. The removable front panels is secured with quick locks to provide simple and easy access. Material: sheet steel Color: RAL 7035 light grey Packs of 1 9968325 TS PS QR Packs of 1 9968326 TS PS QR Packs of 1 9968327 TS PS QR Packs of 2 9968219 TS PS QR For PS cabinet For Data Part No. height in inches/mm Rack DK 63/1600 31U 7410310 72/1800 36U 7410360 78/2000 40U 7410400 86/2200 45U 7410450 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 36

Side Vertical Panel For Front And Rear Cable Management For BasicRacks Includes 4" x 5" duct on front and rear. Color: black Side Vertical Panel For Front Cable Management For BasicRacks Includes 4" x 5" duct on front. Color: black U Dimension Packs Part No. inches/mm of DK 20 35/900 1 9967654 45 83/2100 1 9967652 See page 48 for BasicRacks. TS PS QR U Dimension Packs Part No. inches/mm of DK 20 35/900 1 9967653 45 83/2100 1 9967651 See page 48 for BasicRacks. TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 37

Baying Kit Interconnecting Kit Baying Connector, External Baying Brackets TS/TS And TS/PS For simple and easy connecting of a row of network cabinets. Mounts on upright frame posts of adjoining cabinets. Material: sheet steel Configuration: connecting kit, includes installation hardware Color: RAL 7035 light grey Hexagonal spacers with bolts ensure a sturdy, simple and invisible connection between adjoining network cabinets. Material: sheet steel, zinc-coated, chromated For connecting bayed TS profiles from the outside. Installation: Simply position on the outside and screw-on from either the inside or outside. Material: sheet steel, zinc, chromated Configuration: baying connectors, installation hardware included. These are used for additional stabilizing, or in cases where obstructions are caused by: Mounting panel brackets Large swing frames Busbar supports Material: sheet steel, zinc, chromated Configuration: baying clamps, including installation hardware Packs of 1 set 7526965 TS PS QR Packs of Part No. PS 6 4580000 TS PS QR PU Part No. TS 6 8800490 German patent No. 197 37 668 TS PS QR Packs of Part No. TS 4 4582500 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 38

Cabinet Accessories... POWER PRODUCTS Power Strips Kit Low Profile Power Strips 19" Rackmount Power Strips 8 outlet, 15 amp power outlet strip. Includes adaptor kit to mount strips on vertical frame posts of cabinets. Configuration: adaptor kit, includes installation hardware Color: RAL 7032 pebble grey These strips have 2 screw brackets for mounting to any frame member of PS enclosures or system chassis that are installed in any Rittal enclosure. Also includes clip-in pieces to mount to TS8 in frame. There are 3 left oriented clip-in pieces and 3 right oriented clip-in pieces. No ON/OFF power switch Low profile design 15-foot power cord Attach to any 19" rails for convenient power source to components. 115V power strip for USA/Canada Circuit-breaker Illuminated ON/OFF power switch High quality industrial strength 6-foot power cord with plug Packs of 1 set 9967141 TS PS QR Length in inches Plug Type Part No. 15A, 115V, 8 REC 20 Standard 9968728 15A, 115V, 8 REC 20 Twistlock 9968729 20A, 115V, 8 REC 20 Standard 9968730 20A, 115V, 8 REC 20 Twistlock 9968731 15A, 115V, 10 REC 48 Standard 9968732 15A, 115V, 10 REC 48 Twistlock 9968733 20A, 115V, 10 REC 48 Standard 9968734 20A, 115V, 10 REC 48 Twistlock 9968735 15A, 115V, 11 REC 72 Standard 9968736 15A, 115V, 11 REC 72 Twistlock 9968737 20A, 115V, 11 REC 72 Standard 9968738 20A, 115V, 11 REC 72 Twistlock 9968739 TS PS QR Number of outlets Amp Surge Approvals Color Part No. 15 20 15/20 protection CSA UL DK 6 (3 duplex) - 15A X X X RAL 7032 pebble grey 7274000 6 (3 duplex) - 15A X X X RAL 7035 light grey 7274035 6 (3 duplex) - 15A X X RAL 7035 light grey 7274200 6 (3 duplex) - 20A X X RAL 7035 light grey 7274220 6 (3 duplex) - 15A X X X X RAL 7035 light grey 7274300 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 39

Frame Mounted Power Strips Intelligent Power Strips Fan Trays These strips have two clip-in brackets for mounting to any frame member of PS enclosures or system chassis that are installed in any Rittal enclosure. Illuminated ON/OFF power switch High quality industrial strength 6-foot power cord with plug Intelligent power strips that can be controlled via your network. Strips offer the ability to reboot individual receptacles. Strips have a LED that shows current (Amps) consumed by entire strip. Using the network you can see the current used by each individual receptacle. Monitoring unit is required, but can control up to 4 strips. Cabinet Accessories... CLIMATE CONTROL SOLUTIONS Number of outlets Amp Surge Approvals Color Part No. 15 20 15/20 protection CSA UL DK 8-15A X X X RAL 7044 silk grey 7724000 8-15A X X RAL 7044 silk grey 7724200 8 (4 duplex) - 20A X X RAL 7044 silk grey 7724220 8-15A X X X X RAL 7044 silk grey 7724300 15-15A X X X RAL 7044 silk grey 7748000 15-15A X X RAL 7044 silk grey 7748200 15-15A X X X X RAL 7044 silk grey 7748300 16 (8 duplex) X X RAL 7044 silk grey 7748220 24-15A X X X RAL 7044 silk grey 7772000 24-15A X X RAL 7044 silk grey 7772200 24 (12 duplex) - 20A X X RAL 7044 silk grey 7772220 24-15A X X X X RAL 7044 silk grey 7772300 Fan trays mount into roof cut-outs for increased air movement. 100cfm unimpeded airflow for each fan, 9' cord with plug. TS PS QR Monitoring unit 9968743 8 port, 115V, 9968744 30A 16 port, 115V, 9968746 30A 8 port, 208V, 9968745 20A 16 port, 208V, 9968747 20A TS PS QR Cabinet width No. of fans Part No. SK 23.62"/600mm 2=200cfm 9967162 total 31.50"/800mm 3=300cfm 9967163 total TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 40

Server Fan Assembly Roofmount Blower System Air Conditioners With today s high heat loads inside server enclosures, it is critical to use thermal management techniques which optimize enclosure ventilation. Having vented front and rear doors and a vented roof, Rittal s PS server cabinets provide such ventilation. Rittal s PS server fan assembly takes advantage of the front-to-rear airflow of most servers and allows the user to position the fan assembly in the most critical location within the cabinet. The powerful 220cfm high pressure fans feature a shallow depth chassis design and provide the ability to exhaust hot air out the rear of the enclosure at a dramatically higher For 600 and 800mm wide PS cabinets. Was especially designed for applications that require forced air cooling. The blower systems are mounted to the enclosure frame and can be used with either a raised roof or ventilated roof. 110V Material: sheet steel Color: RAL 7044 silk grey Configuration: includes mounting hardware, 2" spacer bolt for raising standard roof and 10' cord/plug Mini air conditioners Especially developed for small enclosures but can also be used in large enclosures with low heat dissipating requirements. They are available in compact roofmount and powerful wallmount versions. Medium range wallmount air conditioners These medium capacity Rittal air conditioners are in use worldwide and stand out through high dependability, flexible installation options, optimum ease of operation and high safety standards. Air displace- Dimensions Noise Part No. ment cfm at mm inches level SK free delivery H W D H W D dba 365 40 593 545 1.6 23 21 62 9962082 365 40 593 745 1.6 23 29 62 9962102 365 40 793 745 1.6 31 29 62 9962104 365 40 593 895 1.6 23 33 62 9967942 230 40 593 545 1.6 23 21 50 9965139 230 40 593 745 1.6 23 29 50 9965140 230 40 793 745 1.6 31 29 50 9965142 TS PS QR Wallmount air conditioners Today's industrial design requires that equal attention be given to functionality, ergonomics and aesthetics. Rittal's multi-functional wallmount air conditioners fully meet these requirements through their user friendliness, microcontroller technology and ease of installation because of their two-piece chassis construction. Rated Dimensions Useful cooling capacity Rated Current Part No. SK voltage (H x W x D) Qk per DIN 3168 95 F V/Hz ambient 95 F temp. setting 115/50/60 25.00" x 15.75" x 9.76"/ 2325 BTU/2400 BTU 5.1/6.0A Mini wallmount 635mm x 400mm x 248mm 680 W/700 W air conditioner/3262100 115/50/60 37.40" x 15.75" x 9.05"/ 2800 BTU/3300 BTU 6.5/7.6A Wallmount air conditioner/ 950mm x 400mm x 230mm 825 W/960 W 3281100 115/50/60 49.80" x 15.75" x 10.24"/ 4775 BTU/4950 BTU 11.5/20.0A Wallmount air conditioner/ 1265mm x 400mm x 260mm 1400 W/1450 W 3279100 115/50/60 62.00" x 16.00" x 12.00"/ 6895 BTU/7575 BTU 13.8/17.8A Wallmount air conditioner/ 1580mm x 430mm x 290mm 2000 W/2220 W 3390115 Note: see pages 100-101 for help in determining your specific climate control needs. rate than traditional roof mount fan trays. The result is cooler operating equipment, even with very high enclosure heat loads. Configuration: 2 fans per assembly (440cfm total) Includes 10 cord/plug, mounting hardware Optional fan expansion to total of four fans (220cfm per fan) Can be used for venting through roof by installing to PS system bars/dual brackets (not included) Part No. Height (H) Width (W) Depth (D) cfm 2 Voltage Current Noise RAL 7035 light grey Cool black mm mm mm 1 9968490 9968493 298 495 65 440 115/50/60 0.72A 59 dba 9968491 9968494 298 595 65 440 115/50/60 0.72A 59 dba 9968492 9968495 298 695 65 440 115/50/60 0.72A 59 dba 1 Depth of extension from enclosure door into enclosure. 2 Free air delivery. TS PS QR TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 41

Roof Fan Roof Fan Tray Depth/Height Adjustable Mounts easily into any enclosure roof. Requires round cutout. Material/finish: Fan housing of black painted sheet steel with chrome plated finger guards. For 600 and 800mm wide PS cabinets. Designed for applications that require forced air cooling, mounts in side of enclosures frame or on system bars anywhere in enclosure. Can be used with either a perforated roof, a raised roof or 2 SK 3323207 exhaust filters. Cabinet Accessories... CABLE BASES, CASTERS AND LEVELING FEET Plinth/Base Components Front And Rear For TS Base/plinth components consisting of one trim panel and two pre-configured corner pieces. In 8"/200mm high base/plinth components, the rear trim panel consists of two parts for cable entry. Material: sheet steel (components), plastic (plates) Color: RAL 7022 umbra grey (components), RAL 9005 black (plates) Configuration: 1 set = 2 base/plinth components, 4 cover plates, 4 screws and captive nuts M12 for attachment to the enclosure. Configuration: Fan assembly; 10' power cord with plug; grounding strap; installation hardware, 2 finger guards. Protection Noise Rated Air Dimensions Rated Part No. SK rating level current displacement in mm voltage* H W D V/Hz NEMA 1 50 dba 0.4 A 500cfm 120 120 40 115/60 9964163 * 230V available TS PS QR Material: sheet steel Finish: E-coat primer; powder painted RAL 7044 pebble grey Configuration: Fan assembly; 10' power cord with plug; grounding strap; installation hardware Protection Noise Rated Air Dimensions Rated Connection Enclosure Part No. rating level current displace- in mm voltage width SK ment H W D V/Hz NEMA 1 48 dba 0.4A 300cfm 60 511 151 115/60 10' cord 600mm 9962081 NEMA 1 48 dba 0.4A 300cfm 60 711 151 115/60 10' cord 800mm 9962590 TS PS QR For PU Part No. TS enclosure set 4"/ 8"/ width 100mm 200mm inches/mm high high 16/400 1 8601400 8602400 20/500 1 8601500 8602500 24/600 1 8601600 8602600 32/800 1 8601800 8602800 39/1000 1 8601000 8602000 47/1200 1 8601200 8602200 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 42

Plinths And Cable Bases Cable Base Twin Casters Twin Casters Plinths and cable bases are available in 4" and 8" (100 and 200mm) heights to allow more clearance and easy cable entry. The rear panels of 8"/200mm high cable bases consist of two panels that can be removed individually, while the side panels can be laid flat to allow interconnecting and easy cable routing from enclosure to enclosure. System installation holes in these side panels facilitate the mounting of cable collecting rails. Special hardware (included) ensures fast and easy mounting only one screw is needed to fasten a side panel to a corner piece. The bases can be easily mounted to enclosures with cage nuts and spring washers. Material: sheet steel The base provides 4"/100mm additional height for cable management. Cable entry from all four sides through removable panels. Leveling feet can compensate for unevenness of floor. Material: sheet steel Configuration: base, includes installation hardware Color: RAL 7035 light grey Casters provide mobility on even floors. Load capacity/twin caster: 200 lbs/80 kg Load capacity/enclosure: max. 530 lbs/240 kg Configuration: 4 twin casters, installation hardware For mobile use, easily fitted. Thread M12. Configuration: 4 corner pieces with removable front, rear and side panels Color: RAL 7022 dark grey For enclosure Part No. SO W x D 4" plinth/ 8" base/ 100mm 200mm 24" x 24"/ 600 x 600mm 2813200 2814200 24" x 32"/ 600 x 800mm 2846200 2847200 32" x 32"/ 800 x 800mm 2848200 2849200 TS PS QR Packs of Part No. FR 4 2102350 TS PS QR Suitable for Load capacity Ground Lock PU Color Part No. PS (per caster) clearance inches/mm TS, PS, PC, Data Rack 88 lbs/40 kg 2/50 4 without 1 set black 4611000 For mobile use, easily fitted. Thread M12. For enclosure Part No. Frame Frame DK width depth 23.62"/ 23.62"/600mm 7526300 600mm 31.50"/800mm 7526310 31.50"/ 23.62"/600mm 7526311 800mm 31.50"/800mm 7526320 TS PS QR Suitable for Load capacity Ground Lock PU Color (per caster) clearance inches/mm TS, PS, PC, Data Rack 264 lbs/120 kg 4.92/125 2 with, 1 set black 7495000 2 without TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 43

Caster Kit Casters help simple movement on even floors. Easy to install. Kit includes hardware, left and right rigid casters and two swivel casters. Load capacity/caster: 825 lbs Kit includes Part No. PS 4 casters /1 wrench 9968751 Leveling Feet Installation Bolts M6 x 16mm Interior Installation Compensate for uneven floors and can be mounted on enclosure or on base. Length of thread: 2"/51mm Load capacity/leveling foot: 500 lbs/227 kg Type of thread: M12 Cabinet Accessories... ADDITIONAL ACCESSORIES For captive nuts, 19" rackmount components, and blanking panels. Plastic washers included. Torx Screws M6 x 12mm to fit: Slide nuts for installation rails (PS 4179000) Captive nuts (PS 4164000) Threaded blocks (PS 4162000) Torx Screws For the round holes in the TS profile, installation rails and system chassis without mounting flanges. Self-Tapping Screws For the round holes in the TS profile, installation rails and system chassis without mounting flanges. Drilling Screws Mark, drill and tighten in a single operation using electric or pneumatic tools. For metal thickness: 8-3mm Length: 6mm Usable length: 9.5mm Width across flats: 8mm TS PS QR For Packs of PS 4 4612000 TS PS QR Type Packs of Part No. EL Slotted bolt 100 2093200 Phillips bolt 100 2089000 TS PS QR Torx drive for optimum transmission of torques, an extended tool life, and increased safety and reliability when tightening and loosening screw connections. Type of screw Dimensions Packs of Part No. SZ Torx screws M6 x 12mm 300 2504500 Torx screws BZ 5.5 x 13mm 300 2486500 Self-tapping screws: Hex screws M5 x 10mm 500 2504000 Posidrive raised countersunk M5 x 12mm 500 2488000 screws Pan head screws, M5 x 12mm 500 2489000 posidrive Self-tapping screws 300 2487000 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 44

Roof Spacers Cable Entry Roof Panel Ventilated Roof TS Sidewalls Roof spacers are available in three different heights to lift roof for ventilation or facilitate cable entry. Not suitable when enclosure is lifted from top. The cable entry roof panel replaces the standard roof panel. One stationary and one adjustable panel with foam gasket allow easy cable entry. Material: sheet steel Color: RAL 7032 pebble grey Replaces standard roof and has ventilation slots to promote heat removal. The ventilated roof can be used in conjunction with a roof blower. Not suitable when enclosure is lifted from top. Material: sheet steel Configuration: ventilated roof with spacers and installation hardware Color: RAL 7032 pebble grey Sidewalls for TS simply hang into place and offer immediate side access to inside components. Height Packs of Part No. SZ 2.4"/60mm 4 9963394.4"/10mm 4 2422000.8"/20mm 4 2423000 TS PS QR For enclosure W x D Packs Part No. inches mm of DK 24 x 24 600 x 600 1 set 7566200 24 x 32 600 x 800 1 set 7568200 32 x 32 800 x 800 1 set 7588200 TS PS QR For enclosure W x D Packs Part No. inches mm of DK 24 x 24 600 x 600 1 set 7366200 24 x 32 600 x 800 1 set 7368200 32 x 32 800 x 800 1 set 7388200 TS PS QR Dimensions Color Part No. TS inches mm 78.7 x 35.4 2000 x 900 RAL 7035 8109235 78.7 x 39.3 2000 x 1000 RAL 7035 8100235 86.6 x 35.4 2200 x 900 RAL 7035 8129235 86.6 x 39.3 2200 x 1000 RAL 7035 9968593 78.7 x 35.4 2000 x 900 Black 9968597 78.7 x 39.3 2000 x 1000 Black 9968596 86.6 x 35.4 2200 x 900 Black 9968595 86.6 x 39.3 2200 x 1000 Black 9968594 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 45

PS Sidewalls QR Sidewalls Captive Nuts PS Server Doors Sidewalls for PS simply hang into place and offer immediate side access to inside components. Sidewalls feature a quick-lock with security insert. They are simply hung in place and locked and always offer immediate side access to inside components. Material: sheet steel Configuration: 2 sidewalls with quick-lock security insert Color: RAL 7035 light grey For attaching 19" rackmount components and blanking panels to 19" rails. With conductive contact between the components and the enclosure. Without conductive contact between the components and the enclosure. Fully perforated doors for PS. Can be used to convert a network cabinet into a server cabinet. May be used as front or rear door. Dimensions Color Part No. PS inches mm 71 x 35.4 1800 x 900 RAL 7035 9968520 71 x 35.4 1800 x 900 Black 9968521 71 x 39.3 1800 x 1000 RAL 7035 4129235 78.7 x 35.4 2000 x 900 RAL 7035 9968021 78.7 x 35.4 2000 x 900 Black 9968523 78.7 x 39.3 2000 x 1000 RAL 7035 4100235 78.7 x 39.3 2000 x 1000 Black 9968718 86.6 x 35.4 2200 x 900 RAL 7035 9968524 86.6 x 35.4 2200 x 900 Black 9968525 86.6 x 39.3 2200 x 1000 RAL 7035 9968719 86.6 x 39.3 2200 x 1000 Black 9968720 TS PS QR Enclosure Enclosure Packs of Part No. height depth DK 47.24"/ 23.62"/600mm 2 7526200 1200mm 31.50"/800mm 2 7526210 78.74"/ 23.62"/600mm 2 7526240 2000mm 31.50"/800mm 2 7526250 86.61"/ 23.62"/600mm 2 7526260 2200mm 31.50"/800mm 2 7526270 TS PS QR Captive nut Thread Packs of Part No. EL with contact M6 50 2094200 without M6 50 2092200 contact 10/32 50 9957324 TS PS QR Dimensions Color Part No. PS inches mm 71 x 24 1800 x 600 RAL 7035 9968526 71 x 24 1800 x 600 Black 9968527 78.7 x 24 2000 x 600 RAL 7035 9968528 78.7 x 24 2000 x 600 Black 9968529 78.7 x 32 2000 x 800 RAL 7035 9968721 78.7 x 32 2000 x 800 Black 9968722 86.6 x 24 2200 x 600 RAL 7035 9968530 86.6 x 24 2200 x 600 Black 9968531 86.6 x 32 2200 x 800 RAL 7035 9968723 86.6 x 32 2200 x 8000 Black 9968724 TS PS QR TS PS QR Can I use this with...? Let this legend help determine if the accessory is applicable to your cabinet platform. 46

Rittal s Comprehensive Family Of... NETWORK RACKS BasicRacks Data Racks RiPatch STANDARD & ECONOMICAL BasicRacks A complete low-cost, high-quality basic equipment management system. Design Six web channel holes per side allow multiple racks to be bayed together. The BasicRack is made of high strength aluminum extrusion combined with high strength roll-formed thread mounting holes. The rack's base can be bolted to floor for greater stability. The rack has a 5/8" - 5/8" x 1/2" hole pattern. Customers Contractors, educational institutions and IDFs. Applications A complete low-cost, high quality basic equipment management system. Termination equipment Monitoring equipment Other 19" rackmount applications Environments IDFs Data rooms MIS applications Light duty equipment Hot Buttons Economical solution Basic design Easy access to equipment Self-support rack, bolt-down base Stand alone or interconnected High strength aluminum extrusions Cost Designed for price conscious, high-volume customers. VERSATILE & ACCESSIBLE Data Racks A mobile or stationary solution which will astonish you with its versatility. Design Its torsion resistant frame of 14 ga/2mm is welded together and has a high load capacity. The 6-fold, roll-formed, vertical frame members are punched in front and back for mounting 19" components and have additional installation holes on the sides. Available with one or two mounting surfaces. Customers Contractors, offices, IDFs and data rooms. Applications Open rack system for installation in distribution rooms, for flexible networks and for laboratory systems. Components installed on their one or two mounting surfaces are accessible from all sides. Network components Active components Passive equipment Other 19" rackmount applications Environments IDFs Data rooms MIS applications LAN equipment Hot Buttons Installation holes on base, sides and rear Easy portability and access Stand alone or interconnected Base can be bolted to floor or mounted on twin wheel casters Second mounting frame available Torsion free frame Cost A versatile and cost-efficient solution. STYLISH & FLEXIBLE RiPatch A solid choice for efficiently organizing and maintaining your network. Design Manufactured in 1.5mm sheet steel, the RiPatch frame is designed for high density cable applications. Easy to assemble and install, thanks to its modular design and active equipment accessories. Customers Consultants, system integrators, data rooms and showroom applications. Applications High density structured cabling management system for efficiently organizing and maintaining copper and fiber backbones. This easy to install system offers 42U of usable equipment mounting space for CAT5, CAT5E and CAT6 applications. Network components Active/passive components LAN/WAN Other 19" rackmount applications Environments Showcase and MIS applications Data rooms LAN equipment High density copper and fiber installations Hot Buttons Stylish for showcase applications Bolted to floor Stand alone or interconnected Sheet metal construction providing solid cable protection Simple installation with a minimum of parts Cost Solid design providing enduring costeffective performance. 47

19" Open Rack Solutions With... BASICRACKS 4' Height BasicRacks Clear chemical coat (grey) Black 9967638 9967637 Rittal s 19" BasicRack is the perfect solution for standard equipment applications and basic 19" component installations. This rack is bolted to the floor for greater stability, either standing alone or interconnected for larger projects. Because of the simple design of this Rittal rack, users will benefit with easy access to equipment as well as quick assembly and installation. If you are looking for a complete, low-cost but high-quality basic equipment management system, Rittal s BasicRack is the ideal solution. Configuration: Knock down in one package All hardware for installation 2 aluminum extrusions 5/8" - 5/8" x 1/2" hole pattern 12-24 tapped screw holes 12-24 mounting screws included (20) Available in clear chemical coat and black paint Technical Drawings See page 90 7' Height BasicRacks Clear chemical coat (grey) Black 9967636 9967635 48

Achieve Unparalleled Accessibility With... DATA RACKS Data Racks 31U/59" x 22" x 30" (approx) 40U/75" x 22" x 30" (approx) Part No. Second Mounting Frame 7391000 7296000 Part No. Second Mounting Frame 7400000 7298000 Monitor, server, keyboard, printer and other network components can find a safe shelter in these racks. A second 19" mounting frame facilitates installation of component shelves, slide rails, or cable management solutions. Together the Rittal Data Rack, optional second mounting frame and our comprehensive accessory program offer smart solutions for a multitude of network applications. Configuration: Data Rack 19" vertical frame Base with integrated feet Captive nuts and screws ordered separately RAL 7035 light grey frame highlighted with RAL 5018 teal trim Mounting Frame (additional) 19" frame including installation hardware Technical Drawings See page 90 36U/68" x 22" x 30" (approx) 45U/84" x 22" x 30" (approx) Part No. Second Mounting Frame 7396000 7297000 Part No. Second Mounting Frame 7445000 7299000 49

Smart Cable Management Racks... RIPATCH RiPatch Part No. RiPatch 7925010 See page 51 for RiPatch accessories. Rittal s RiPatch high density structured cabling system is a smart solution for copper and fiber backbones. This easy-to-install system offers 42U of usable equipment mounting space for CAT5, CAT5E and CAT6 applications. With a foot print of 600mm wide and 450mm deep, the RiPatch frame can be an ideal product for back-to-back, freestanding or wallmount requirements. The sidewalls act as a cable tray, providing maximum space for hardwired cable management. A wide range of active equipment accessories also accompanies the system. Configuration: 42U mounting frame Extendable floor plinth 50mm (2") plinth spacers Top cable trough, extendable Plain top cover Assembly hardware 1.5mm sheet steel with RAL 7035 light grey finish and RAL 5018 teal trim * 10 cable fingers not included Technical Drawings See page 91 50

Baying Kit Cable Fingers Extended Plinth Infill Kit Baying Tubes Row End Sidewall Top Cover Cable Guide Tubes Available in either a 150mm or 300mm baying kit which allows you to decide on the size of a cable-way required between frames. Fitted between 2 RiPatch frames, this kit provides the base plate and baying tubes which provide the cable management needed. Configuration: 1 off plinth infill plate, 2 off fixing plates and screws, 6 off clip-in baying tubes Material: sheet steel, baying tubes of tubular steel with nylon inserts for fixing to frames Color: RAL 7035 light grey, powder coated ABS tubular plastic cable fingers clip-in to rounded front face of frame, providing cable management of cables presented to 19" patch panels. Material: ABS injection mounted plastic Color: RAL 5018 teal This accessory is required when the floor plinth is extended, filling the gap in the plinth frame, and giving a smooth finish to the now extended floor tray. Material: sheet steel Color: RAL 7035 light grey As supplied in the baying kits, but available as an accessory in packs for additional primary cable management as required. Simplicity to fit with their clip-in fastening system, even when system is fully populated and in service. Material: tubular steel tube, with nylon inserts for clip-in fixing Used to finish a suite of RiPatch frames, the 450mm deep panel includes: Marker board Document pocket Fixing hole for cable hoops or spare cord storage. The end row panels should be used in conjunction with a 150mm baying kit, ordered separately. Fitted vertically into the fixing provided at the top of the frame, these guide tubes ensure that cables can be pulled across the roof section of the system without being managed. The tubes ensure a smooth guide, and also ensure minimum bend radii is maintained. Material: tubular steel Color: RAL 7035 light grey Length in inches/mm 6/150 7925020 12/300 7925030 Packs of 5 7925040 Single kit 7925090 inches/mm Packs of 6/150 6 7925100 12/300 6 7925110 Configuration: 6 tubes and assembly parts Color: RAL 7035 light grey Packs of 1 7925060 Material: sheet steel Color: RAL 7035 light grey Pack of 4 7925120 51

Rittal s Comprehensive Family Of... WALLMOUNT CABINETS QuickBox Enclosures EL NEMA 12 3-Part Cabinets EL Non-NEMA 3-Part Cabinets FUNCTIONAL & COST-EFFICIENT QuickBox In every respect the QuickBox is the optimum combination of the proven quality and flexibility of Rittal enclosures. Design Wallmount panel for 19" or metric components. Cover has vent slots for ventilation through convection, also accepts fans. Viewing door or sheet steel door with lock for access from front. Cable entry panels with brush insert and integrated cable collecting rail. The removable cover makes installation very easy. Customers Contractors and installers Educational environments Government institutions Applications A smart solution for small networks or floor distributors, based on customers needs. One of its outstanding features is the easy and unobstructed access to all components and wiring. QuickBox offers a complete solution ideal for educational applications. Termination equipment Networking equipment Environments Data rooms and office spaces Passive equipment School facilities Hot Buttons Cost-efficient and secure One enclosure, 12 models Off-the-shelf, completely assembled Versatile 2-Part design INCREASED SECURITY & SERVICEABILITY EL Series 3-Part An ideal solution for simple wallmount installations while assuring only authorized entry. Design Wallmountable design with built-in swing frame for access to rear of equipment. Secure and sturdy with NEMA 12 protection available. Roll-formed construction provides high stability and component protection. NEMA 4 and 12 versions. Customers Educational applications Office buildings and hospitals Small clusters of workstations Applications An ideal solution for simple wallmount installations while assuring only authorized entry. Ideal for small networks or floor distribution in environments that require a high degree of security and a high industrial protection rating. Active components Networking and monitoring equipment Termination equipment Environments NEMA 12 environments Smaller networks Remote models Climate consideration Offices or factory environments Hot Buttons Wallmountable design NEMA 12 protection Wide range of accessories Built-in swing frame Secure and sturdy ULTIMATE FLEXIBILITY & ACCESSIBILITY EL Series 3-Part Provides a perfect solution for packaging electronic equipment even under extreme conditions. Design Wallmount section with cable entry gland panels. Hinged swing-out center section for easy access to components and wiring. Depth-variable 19" mounting surface. Customers Educational applications Office buildings and hospitals Small clusters of workstations Applications This wallmount is ideal for small networks or floor distribution in environments that require a high degree of security and a high industrial protection rating. Active components Networking and monitoring equipment Termination equipment Environments Offices, schools, and hospitals Factory floor applications Hot Buttons Separate, swing-out center section for front and rear component access NEMA 12 protection available Wide range of accessories Sturdy design provides solid support for equipment 52

Versatile Wallmount Solutions... QUICKBOX ENCLOSURES Viewing Door Series Dimensions Part No. 6U/14.25" x 24" x 24" (approx) 7502016 9U/20" x 24" x 24" (approx) 7502026 12U/25" x 24" x 24" (approx) 7502036 15U/30" x 24" x 24" (approx) 7502046 18U/35.25" x 24" x 24" (approx) 7502056 21U/40.50" x 24" x 24" (approx) 7502066 Rittal s new QuickBox wallmount enclosures combine variety with flexibility and cost efficiency. With its depth-adjustable 19 mounting surface, the QuickBox is the ideal solution for packaging network equipment or floor distributors. One enclosure, 12 models - that means 12 standard products instead of complicated custom fabrication. Choose from a large selection of sizes, with or without viewing door, that offer cost-efficient, customer-oriented solutions for the most diverse applications. The QuickBox is available off-the-shelf, completely assembled. In every respect the QuickBox is the optimum combination of the proven quality and flexibility of Rittal enclosures. Configuration: Wallmount section with 19" rails and brush inserts Housing cover with base Cover with vent slots and brush inserts Sheet steel or viewing door options Security locks on front door and two sides Cable collecting combination rails Front 19" rails, infinitely depth adjustable RAL 7035 light grey Solid Sheet Steel Door Series Technical Drawings See page 92 Dimensions Part No. 6U/14.25" x 24" x 24" (approx) 7502116 9U/20" x 24" x 24" (approx) 7502126 12U/25" x 24" x 24" (approx) 7502136 15U/30" x 24" x 24" (approx) 7502146 18U/35.25" x 24" x 24" (approx) 7502156 21U/40.50" x 24" x 24" (approx) 7502166 53

Total Solutions... QUICKBOX ACCESSORIES 19" Component Shelves 2U Telescopic Slides for Component Shelves Combination Cable Collecting Rails Internal Enclosure Fan Can be installed: In enclosure between 19" rails In swing frames with special 19" angles In vented component shelves with 19" rail mounting Material: sheet steel Color: RAL 7035 light grey The slides are easy to install and can also be used to convert fixed shelves to sliding shelves, in which case the existing fastening bolts are replaced with the telescopic slides and fastened to the 19" rails. Material: sheet steel Configuration: telescopic slides have two stops and can be mounted in standard installation holes. Load capacity per pair: 110 lbs/50 kg These rails make it possible to fasten cables with cable clamps or cable ties and also allow equipotential bonding between the cable shield and ground bus. Material: aluminum, zinc-coated, chromated Configuration: combination rail, installation hardware This internal enclosure fan helps to avoid hot spots and supports air routing of active enclosure climate control components. It is adjustable on two axes and can be fastened to the frame section. Configuration: Complete unit, ready for installation, with radial fan and swing bracket as well as installation materials. For installation in fixed position or on telescopic slides inches mm W D W D 15.35 9.84 390 250 7119250 (fixed) 15.35 11.81 390 300 7148035 (telescopic/fixed) 15.35 16 390 400 7119400 (fixed) Vented component shelves (with 19" rail mounting) inches mm W D W D 16 12 400 300 7143035 16 16 400 400 7144035 16 20 400 500 7145035 For component Packs Part No. shelf depth of DK 11.81"/300mm 1 set 7051000 15.75"/400mm 1 set 7061000 19.69"/500mm 1 set 7081000 Note: second set of 19 rails for cabinet is necessary. For Length Packs Part No. enclosure of DK width 23.62"/ 15.75"/ 2 7502304 600mm 400mm Air displacement Rated Part No. (unimpeded voltage SK air flow) Volt/Hz 100cfm 115/50/60 9965364 54

Top Notch Security And Durability... EL NEMA 12 3-PART CABINETS 24" x 24" Deep Cabinet Series (approx) 14" x 24" x 24" (approx) Part No. 6U 7706024 24" x 24" x 24" (approx) Part No. 12U 7712024 35" x 24" x 24" (approx) Part No. 18U 7718024 Rittal s wallmount network cabinets offer stability, accessibility and security to the networking specialist. All standard models feature usable panel heights from 6U to 21U, ensure safe packaging for sensitive components as well as protection from the environment and from unauthorized access. Double security is assured through separate locks on the center swing frame section and the front viewing door. Rittal s 3-part wallmount cabinets a perfect combination of protection and versatility. Configuration: Rear housing with removable top and bottom covers Two vertical system bars Cable collecting rail Center swing frame with lock and two adjustable 19" rails Front viewing door with double bit lock Adjustable 19" rails RAL 7032 pebble grey and RAL 7033 mortar grey NEMA 12 protection Technical Drawings See page 93 19" x 24" x 24" (approx) Part No. 9U 7709024 29" x 24" x 24" (approx) Part No. 15U 7715024 40" x 24" x 24" (approx) Part No. 21U 7721024 55

The Ultimate In Accessibility... EL NON-NEMA 3-PART CABINETS 24" x 24" Deep Cabinet Series (approx) 19" x 24" x 24" (approx) Part No. 9U 7709635 40" x 24" x 24" (approx) Part No. 21U 7721635 Rittal s wallmount network cabinets offer stability, accessibility and security to the networking specialist. All standard models feature usable panel heights from 9U to 21U, ensure safe packaging for sensitive components as well as protection from the environment and from unauthorized access. Double security is assured through separate locks on the center swing frame section and the front viewing door. Rittal s 3-part wallmount cabinets a perfect combination of protection and versatility. Configuration: Rear housing with removable top and bottom covers Two vertical system bars Cable collecting rail Center swing frame with lock and two adjustable 19" rails Front viewing door with double bit lock Adjustable 19" rails 2 filters Ground bus RAL 7035 light grey and RAL 5018 teal Technical Drawings See page 94 29" x 24" x 24" (approx) Part No. 15U 7715635 56

Ideal For 3-Part Cabinets... EL 3-PART ACCESSORIES Fan Expansion Kit Mini Ergoform-S Handle Cable Entry Panel With Brush Insert Wallmounting Brackets 19" Component Shelves 2U This kit includes one fan, 6'/1.8m cable/plug, finger guard and installation hardware. Technical Data: Rated voltage: 115 or 230V Rated current: 19/18 W for 50/60 Hz Air displacement (unimpeded air flow): 85/100cfm/140/165 m 3 /h for 50/60 Hz Temperature range: +14 F to +131 F/ -10 C to +55 C Replacement Exhaust Filters Filters are standard equipment mounted on right and left side walls of center section. For 3-Part EL style wallmount network cabinets. Accepts SZ 2467000 and SZ 2469000 lock inserts. Multiple roll-fold and welded, with foamed-on gasket and plastic brush insert for easy cable entry. Utilize pre-drilled holes in rear wall. Version with 1.6"/40mm stand-off allows cable routing behind the enclosure. Material: steel, chromated Can be installed: - in enclosure between 19" rails, and - in swing frames with special 19" angles. Material: sheet steel Color: RAL 7035 light grey Voltage Packs of Part No. SK 230V fan 1 set 7980000 115V fan 1 set 7980110 Packs of Part No. SK 5 filters 3322700 Color Part No. EL RAL 7035 light grey 2242035 RAL 7032 pebble grey 2242000 Secruity Packs Part No. SZ lock insert of No. 3524 E 1 2467000 Pushbutton with 1 2469000 No. 2123 lock Color RAL 7035 light grey 7705035 Stand-off Packs of Part No. SZ dimension A 1.6"/40mm 4 2503200.4"/10mm 4 2508200 For Installation In Fixed Position Or On Telescopic Slides inches mm W D W D 15.35 11.81 390 300 7148035 15.35 16 390 400 7119400 15.35 9.84 390 250 7119250 57

Rittal s IT Products Offer... TOTAL SOLUTIONS Interactive Terminal Systems ITS Kiosks... 59-60 CMC Monitoring Systems CMC II... 61-72 Easy CMC... 73-74 Technical Appendix Technical Drawings... 75-94 Technical Information... 95-101 58

Designed For Point-Of-Information Applications... INTERACTIVE TERMINAL SYSTEMS AlphaLine Our new AlphaLine kiosk represents today s terminal for the world of tomorrow. Two key elements have been combined into this new housing: a smarter, lightweight design has been blended with a modern look. The kiosk is topped off with a compact and highly-functional Micro ATX PC, one of the smallest of its kind. And the kiosk lets you present your information impressively you can navigate into the future with a keyboard or a touchscreen. Extraordinaire and exciting Rittal ITS AlphaLine. System Configurations And Options: Form factor: Freestanding Hardware supported: Flat panel or touchscreen with integrated computer, magnetic or smart card, keyboard with pointing device, stereo speakers and power surge strip. Standard unit includes: Kiosk, high resolution 15" TFT Slimline display, touchscreen, elegant keyboard support, integrated long-stroke keyboard with trackball, sound system, surge protection with integrated on/off switch, powerful Pentiumclass Micro ATX PC. ITS AlphaLine 50" x 23" x 25" (approx) 50" x 23" x 21" (approx) Part No. With keyboard 9007250 Enclosure only 9007200 Part No. With touchscreen 9007150 Enclosure only 9007100 OptiLine Sleek and ergonomic, this attractive stand-up kiosk delivers the ideal solution when style and functionality are needed. The tall, slimline design provides marketing impact, while utilizing minimum floor space. The OptiLine can be floor-mounted or stand-alone, and a removable front panel allows for easy customization or the addition of graphics. System Configurations And Options: Form factor: Stand-up freestanding or floormounted Hardware supported: PC (small form factor), keyboard/ pointing devices, up to 15" and 17" flat panel or touchscreen monitor, stereo sound, power strip and communication devices. Standard unit includes: Kiosk, vented flatpanel housing, keyed access doors, rear cable entry, stainless steel support beams for cable routing, speaker mounting, filter fan, floor-mounting provisions, removable graphics panel with material or customization options. ITS OptiLine Basic version 60" x 22" x 20" (approx)/console version 60" x 22" x 24" (approx) Part No. Basic version/100mm monitor depth 9000100 Console version/100mm monitor depth 9000101 Basic version/100mm w/base 9000102 Console version/100mm w/base 9000103 ITS OptiLine II Basic version 61" x 22.25" x 20.5"/Console version 61" x 22.25" x 20.5" Part No. Basic version 15"/enclosure only 9006550/9006500 Basic version 17"/enclosure only 9006750/9006700 Console version 15"/enclosure only 9006650/9006600 Console version 17"/enclosure only 9006850/9006800 59

ArcLine This modern console-style kiosk offers an ideal blend of versatility and functionality. Its unique arc design accommodates a wide variety of components and options. Ideal for POI, POS or Internet applications, the console s sturdy, durable design makes it a perfect solution for practically any interior application. System Configurations And Options: Form factor: Freestanding console Hardware supported: Desktop or mini-tower PC, CRT, flatpanel or touchscreen monitor, laser or thermal printer, communication devices, stereo speakers, and keyboard with pointing device and/or card reader. Standard unit includes: Kiosk, removable monitor glass for up to 17" conventional or touchscreen monitor, pneumatic top-opening lid with concealed interior release, adjustable monitor mounting hardware, removable printer paper output slot, keyed rear access door, 19" mounting rails, 2 starshaped vents for sound, rear filter fan provision, 4 leveling feet, floor mounting provisions, bottom cable access. ITS ArcLine 46" x 20" x 22" (approx) Part No. ArcLine basic/dark grey 9001100 ArcLine basic/stainless steel 9001300 ArcLine basic/metallic 9001800 46" x 20" x 22" (approx) Part No. ArcLine with speaker/dark grey 9001200 ArcLine with speaker/stainless steel 9001400 ArcLine with speaker/metallic 9001900 VIPLine The Rittal VIPLine offers an ideal solution for slimline kiosk designs. Whether floor or wallmounted, the VIP is a smart, flexible solution for touchscreen applications. You can choose from standard or configured-to-order designs to accommodate a range of computer and monitor sizes. Get ultra flexibility with the Rittal VIPLine the line offers a variety of sizes for your next POI application. System Configurations And Options: Form factor: Slimline floor pedestal or wallmounted Hardware supported: Flat panel or touchscreen monitor, panel mount PC, stereo sound, power and communication devices. Standard unit includes: Kiosk, extruded aluminum side/front panel with custom monitor cut-out, ergonomic tilt angles (depending on model), rear wall with security lock, mounting holes/cable entry provisions, center vents for air circulation. ITS VIPLine 63" x 22" x up to 6.1" (straight), 57" x 22" x up to 6.1" (angular) Part No. 105mm depth, straight 9002100 155mm depth, straight 9002110 105mm depth, angular 9002200 155mm depth, angular 9002210 63" x 22" x up to 6.1" (approx) Part No. 105mm depth, wallmount design 9002409 155mm depth, wallmount design 9002419 60

CMC II Rittal CMC II the complete system for monitoring, regulating and reporting all safety-relevant issues in the data network enclosure. Temperature control, humidity, vibration and personalized access control are managed by the CMC II. CMC Connection CMC PARIS Remote control Thanks to bi-directional data transmission from the CMC II, many functions of the enclosure can also be displayed and controlled from a remote control center on the other side of the world, including via the web. With its extensive range of system accessories and support of various transmission systems, the CMC II plays a key role in IT security. CMC TCP/IP Router TCP/IP CMC TCP/IP network All CMC II units may be integrated into the existing network interconnection via Ethernet 10BaseT. This provides a cost-effective, flexible solution for alarm relaying. Benefits CMC II alarm reporting via TCP/ IP/SNMP as standard Optional CMC II ISDN solution Monitoring of Rittal climate control equipment Extendable inputs and outputs via I 2 C/Power-I 2 C 3-phase voltage monitoring via I 2 C Plug-and-play solutions Personalized access control Wide-range power pack 48V DC 115/230V AC/50/60 Hz Linking of functions with the SSC server switch CMC CMC SNMP management The supplied MIB means that existing SNMP management software or the Rittal CMC Manager may be used for the alarm headquarters on PC. SNMP 61

Increased Security Benefits... ENCLOSURE MONITORING SYSTEM CMC II Plug & Play All Sensors Are Plug-in Cable management module The Rittal sensors are simply plugged into the patch panel distribution box with RJ connectors. CMC II I 2 C Extensions For Additional Output The CMC base unit has the following functions: 2 temperature sensors 2 analog inputs 4 20 ma 7 digital inputs 3 relay outputs 2 fan outputs 1 monitor 230/115V AC I 2 C bus for additional extensions With the BUS system, up to 2 reader units 16 temperature sensors 16 digital inputs 4 relay outputs 6 monitors 230/115V AC may be connected to the CMC base unit. 2U fan unit DK 7200511 The CMC II is simply plugged into the fan unit. Infrared access sensors monitor the doors. Smoke sensor, vibration sensor and temperature sensors are all integrated into the box. The system will fit any 19"/482.6mm enclosure with suitable dimensions. CMC Cable management module Part No. 7200411 62

Total Remote Monitoring Capabilities... CMC II ENCLOSURE MONITORING SYSTEM The CMC Manager is an SNMP software package, specifically tailored to the CMC. It can be downloaded from our website as freeware: www.rittal-corp.com CMC Web Manager The CMC Web Manager may be installed on a selected server in the network. From this server, users in the network are then able to retrieve, inquire and edit all relevant CMC data via the Intranet or Internet using software tools (such as Internet-Explorer 5 or Netscape Navigator.) The software also contains a control core with the allocation of personal codes to activate individual enclosure doors via SNMP. Minimum system requirements for the CMC Web Manager: Windows NT/2000 Network connection with TCP/IP System requirements for the user: Internet-Explorer 5 or Netscape Navigator, etc. CMC Web Manager CD-ROM 7200991 63

EXT 10BaseT P-I 2 C I 2 C Analog Input Digital Input Relay1 Relay2 Alarm Power Fan1 Fan2 Out / In 48 230 V 1 2 3 4 RJ 12 jack Serial interface for additional extension of the CMC II with ISDN-TA. RJ 45 jack Integral Ethernet interface to IEEE 802.3 via 10BaseT. RJ 45 Power-I 2 C P-I 2 C bus for connecting extension units to the I 2 C amplifier. Analog inputs 10-pole connector for two temperature sensors, two times 4 20 ma and extension via I 2 C bus. Technical information Network connection/setting via the CMC II menu program A central administrator is able to monitor all network and server enclosures in internal networks as well as external networks via WANs, initiate any servicing which may be required, and implement settings on the CMC II. 1 2 3 4 5 6 7 8 9 10 11 5 6 7 8 Digital inputs 20-pole connector for seven input signals (floating contacts) and 24V DC voltage source (100 ma). Relay 1 Changeover contact 250V AC, 5 A as standard for heater. Relay 2 Changeover contact 250V AC, 5 A as standard for latch mechanism. Alarm relay Changeover contact 250V AC, 5A. Each error message can be set to initiate activation of the alarm relay (freely configurable). Dimensions 1U, 19"/482.6mm rack mount with 4.13"/105mm installation depth Temperature range 41 F to 113 F/+5 C to +45 C Processor AM186-(20 MHz), 16-bit CPU, Intel-compatible Main memory 512 kb 16-bit DRAM Program memory 512 kb flash EPROM Rated voltage 48 to 230V DC, 50/60 Hz, IEC 320 socket Rated consumption 20 VA Permissible voltage drop time maximum 10 ms Internal CMC II power pack output 24V DC, maximum 100 ma Serial interface RS 232 for programming/linking to a PC, X modem Ethernet connection 10BaseT, IEEE 802.3 (10 MB/s full duplex), TCP/IP, SNMP, TELNET, TFTP Optical/acoustic displays 5 LEDs, LCD display with 40 characters, piezoelectric signal generator Input 3 membrane-sealed keys Digital inputs (power requirement per input: 7 ma) 7 (vibration/smoke/door/swing lever/reader unit/ups1/ups2) Analog inputs 4 (temperature 1/2 and 2 current inputs 4 20 ma) Monitoring functions 3 (mains voltage, fan 1, fan 2) Relay outputs 3 (fan 1/2) 3 A/250V, normally open contact Relay outputs 3 (heater/lock/alarm) 5 A/250V, changeover contact Extension I 2 C bus, P-I 2 C bus and serial interface US Design Model No. 411,985 German Patent No. 197 10 019 German Utility Model No. G 296 22 718 German Reg. Design No. M 97 05 717 Danish Design Pattern No. MR 00534 Norwegian Design Pattern No. 74617 Austrian Design Pattern No. 28798 U.K. Reg. Design No. 2070680 IR Reg. Design No. DM/042 821 with validity for BE, CH, ES, FR, IT, NL Indian Design Pattern No. 175179 9 10 11 Fan relay 12-pole connector with main voltage monitoring, fan current monitoring and two relays for fans. Voltage supply The CMC II is supplied with voltage via the IEC 320 outlet (48 230V DC/50/60 Hz). Cable clamping/cable management The 2 screws are designed for cable clamp rails DK 7610000/ DK 7611000/DK 7200110. The SNMP-MIB is included with the supply of the CMC II. This allows the following functions to be incorporated in SNMP software tools: HP Open View Cabletron SPECTRUM Enterprise Manager OPEN NSÜ CINeMa Novell Manage Wise CMC II Computer Multi Control with 512 kb Flash-ROM program memory PU Wide-range power pack 48V 230V DC/50/60 Hz With X modem function 1 7200100 For rear mounting: Cable clamp strap (narrow), DK 7610000, Cable clamp strap (wide), DK 7611000, CMC cable clamp strap (with cover), DK 7200110, Connection cable to the SSC, DK 7200541. 64

Plug & Play Connection Accessories CMC II ENCLOSURE MONITORING SYSTEM Power Cable Power is supplied to the CMC II base unit via the power cable. The cable management module DK 7200400/411 and the 2U accessory unit DK 7200511 may also be supplied with the power cables. Technical data: PVC cable, 3-prong with earth/grounding-prong plug and IEC cable coupler (for non-heating appliances) protection. Configuration: 1 power cable, 6" length. Connector Kit For CMC II Screw-Fastened & Programming Cable The sensor cables are fastened directly to the respective connector from the connector kit, which is then plugged into the CMC II base unit. In this way, the plug connections to the CMC II are easily removed and re-installed during maintenance and assembly in the network enclosure. Cable For Sensor Connection & 24V Power Pack I 2 C-Booster Junction cable for RS 232. The RJ 11 jack is connected to the CMC II front, the 9-pin Sub-D to a serial PC interface. The 32 ft/10m long cable can be cut to the exact length required for optimum connection of sensors, Ergoform-S and reader units in the enclosure to the CMC II base unit. This power pack is used to supply power to the smoke sensors and the Ergoform-S handle with card or coded lock. For mounting power pack use cable clamp strap DK 7611000/ DK 7200110 or cable management module DK 7200400. Configuration: 1 power pack with top hat rail and fastener for top hat rail, including assembly parts. The I 2 C-Booster is used to reinforce the signal of the CMC I 2 C bus system. It can be used optionally. Rittal reader units or the extension unit may also be integrated. Maximum cable length: 23 ft/7m Country Voltage specific versions USA/CDN 115 3686338 D/F/B 230 7200210 Parts needed in addition to the CMC II: Power cable for the CMC operation. Connector kit for CMC II 7200223 Programming cable 7200221 Additional parts needed with the CMC II: The connector kit is necessary for the connection of accessory coupling and PC connection. Cable 32 ft/10m 9966831 Configuration: 1 32'/10m cable. Power 24V DC 100-240V AC 7200240 36-72V DC 7200248 Technical data: Input (DK 7200.240): 100 240V ± 10%, 50/60 Hz/AC Input (DK 7200.248): 36 72V DC Output: 24V DC/0.6A I 2 C-Booster 7200600 Lead times upon request. Rated voltage: 24V DC Rated current maximum: 50 ma 65

Suppressor For Fans Cable Management Module, Mounting Kit The capacitors eliminate interferences of the fans with self-starting shaded-pole motors. Each fan unit should be provided with a capacitor which is across the mains input. The capacitors are equipped with terminals so that they are simply connected to the fan cable. Technical data: Dielectric strength: 275V AC Type: X2 For mounting on the 19"/482.6mm section or on the enclosure frame. The cable management module may be fitted at a readily accessible point in the enclosure. Even in fully populated network enclosures, installation work and modifications can still be carried out to perfection. The supplied CMC connection cable gives access to all sensor connections in the cable management module. A top hat rail accommodates terminals or the 24V power pack. The cable may be connected to the sensors using the supplied terminals. Open/ individual wiring is possible. Capacity PU 100 nf 20 7200490 Following fan systems include self-starting shaded-pole motors: (z. B. SK 3322...., SK 3323...., SK 3324...., SK 3325...., DK 7980.000, DK 7966.035,DK 7968.035, DK 7986.035, DK 7988.035, DK 7980.660 7980.880, DK 7981.... DK 7981.880, DK 7526.900, DK 7526.910 with variations). Mounting kit 7200400 Width: 19"/482.6mm Height: 1U Depth: 5.63"/143mm + 12mm Material: Sheet steel, 19 ga/1mm, chromated Configuration: Base section, cover panel, terminal blocks, top hat rail, 19"/482.6mm bracket, mounting bracket and CMC connection cable. In conjunction with the CMC, the following are additionally required: 1 connection cable DK 7200210 and 1 connector insert DK 7200220 Cable Management Module With Connection System And 24V Power Pack For CMC II Additional parts needed with CMC II: 2 power cords, 7200.210 Technical data: Rated voltage: 100-240V AC Dimensions: Width: 19"/482.6mm, Height: 1U, Depth: 4"/100mm Temperature range: 41 F to 113 F/+5 C to +45 C For mounting on the 19"/482.6mm mounting rails or on the enclosure frame. The cable management module may be installed in the enclosure at well accessible places. Even in fully populated network enclosures, installation work and retrofitting can still be carried out to perfection. The connection cable attached to the rear with the CMC connector kit is simply connected to the CMC. The front is equipped with 21 RJ 11/12 jacks, 4 terminals and an IEC 320 connection. All sensors are easily connected to the module using RJ 11/12 connectors. The 24V power pack is integrated into the wiring concept. Power for monitoring and for the heater, fan, alarm and power pack is supplied via the IEC 320 connection. Functional description/connection options: RJ 11/12 jacks for CMC accessories: 4 vibration sensors, 7200322 4 access sensors, 7200332 2 UPS monitoring devices with cable, 7200420, see chart at right 2 smoke alarm sensors, 7200312 2 electromagnetic handles, 7200351/551 1 door release with cable, 7200430, see below 2 I 2 C (reader units/extension), 7200380/381/382 1 temperature sensor, 7200301 2 analog sensors (e.g. hygro-thermo sensors), 7200362 Terminals: 1 alarm (changeover contact for 250V AC, maximum 5A) 1 heater with fuse (normally open contact for 250V AC, maximum 5A) 2 fan systems with fuse (normally open contact for 250V AC, maximum 2A) Wired to sensor outlets 7200411 Accessories power cords/ extension cable RJ 11/12 Plug Jack PU RJ 11 4 7200420 RJ 12 4 7200430 RJ 11 RJ 11 4 7200440 RJ 12 RJ 12 4 7200450 66

CMC II Options And Accessories CMC II ENCLOSURE MONITORING SYSTEM 7 12 10 Basic Configuration 6 2 Climate Control Unit Interface Cable 3 4 11 8 5 9 13 1 The climate control unit interface cable has been specially designed for Rittal enclosure air conditioners with integral microcontroller. It is connected to the CMC via the extension unit DK 7200913. In this way, the error messages shown to the right can be monitored via the network. TS8 preconfigured enclosure with the CMC monitoring system and CMC accessory components Rittal now offers preconfigured network enclosures with the CMC monitoring system, and fully wired with sensors. There is a choice of 3 preconfigured enclosure models, all of which are equipped with the CMC II monitoring system. The monitoring functions of the individual variants are shown in the table. Further details of accessory components can be found on the specified pages. Item Preconfigured CMC enclosure based on DK-TS 7830200, H x W x D 83 x 32 x 32"/2100 x 800 x 800mm, Type 1 Type 2 Type 3 painted in RAL 7035 light grey, textured. 7200711* 7200721* 7200751* 1 glass door, front with aluminum section and comfort handle, right-hand hinge 1 rear door with comfort handle, right-hand hinge 1 roof panel for cable entry 1 gland panel, front, rear area open 1 base/plinth 100mm with ventilation Mounting rails, 19"/482.6mm, 42U, front and rear 2 sidewalls, lockable 2 TS punched sections with mounting flanges Earth/grounding of all enclosure panels on the enclosure frame Supplied loose: 4 spacer bolts, 4 leveling feet, 4 cable clamp rails, screws Configuration also includes, preconfigured and installed 1 1 Rittal Computer Multi Control (CMC II), 1U, DK 7200100 2 1 power strip with voltage monitoring and 7 outlets 3 1 power strip, overvoltage protection, filter with monitoring and 9 outlets 4 1 fan mounting panel with two monitored fans 5 1 NTC temperature sensor 6 1 hygro-thermo sensor 7 1 smoke alarm sensor 8 4 access sensors, front & rear door and both sidewalls 9 1 vibration sensor 10 1 electromagnetic comfort handle front door 11 1 electromagnetic comfort handle rear door 12 1 smart card reader 13 Cable management DK 7200411 Other versions available on request. * Lead times upon request. Interface cable 7200540 The 8 alarm messages are as follows: 1. maximum enclosure internal temperature 2. dirty filter mat 3. enclosure door open (only if switch installed) 4. high-pressure monitor 5. evaporator coil 6. current monitoring of compressor 7. current monitoring of internal fan 8. current monitoring of external fan 67

2U Accessory Unit For CMC II CMC II Extension Units With the plug & play compatibility system, the CMC accessory unit is simply fitted into the 19"/ 482.6mm section, and voila! It contains two fans and is installed in the uppermost position of a network enclosure. The roof panel of the enclosure must be equipped with vent holes. The unit is fully wired and a CMC is simply integrated into the bottom section. The CMC basic module is not included with the supply of the unit. The unit contains a number of functions, which are listed to the right. Up to 3 extension units may be connected to a CMC. Alarm limits may be pre-set for all temperatures/voltages. The supplied programming software allows logical linking of the digital inputs and outputs. The logical links can be sent to the CMC via TFTP. Note: A power pack is required (DK 7200240/248). Technical data: Temperature inputs: 4/8 x NTC (DK 7200301) Digital inputs: 8 (supply 24V DC per 7 ma) Relay outputs: 2 (changeover contacts 5A/250V) Voltage inputs: 3 x 100 230V AC Rated voltage: 24V DC Rated current: 140 ma Interface: I 2 C, P-I 2 C, maximum cable length 6 ft/2m Accessory unit 2U 7200511 Functions of the unit: monitoring of the mains voltage monitoring of the temperature temperature control via two separate fan circuits smoke monitoring vibration monitoring access monitoring for the front and rear doors jacks for extension with: ups DK 7200430, electromagnetic front and rear doors DK 7200351/551, reader units DK 7200380/381/382 hygro-thermo sensor DK 7200362 CMC II Max. extension unit quantity per CMC* 8 x temperature 1 7200911 inputs 4 x temperature 2 7200913 inputs 8 x digital inputs 2 x relay outputs 3 x voltage AC 2 7200520 * A maximum of 3 extension units may be connected to one CMC II. Power l 2 C cable Connection from CMC II 7200601 to extension unit DK 7200911/913 When extending DK 7200520, a regular RJ 45 network cable may be used. 68

Accessories For Sensors/Actuators CMC II ENCLOSURE MONITORING SYSTEM Temperature Sensor Hygro-Thermo Sensor Airflow Monitor/Electrical Contact The economic solution for: Temperature measuring Temperature indication Temperature monitoring Temperature regulation Measuring transformers, one LCD display for indication as well as relays for fan control are made available via the excellent electronic equipment of the CMC II.Two NTC sensors can be connected to one CMC II. The temperature sensor can be fitted anywhere in the network enclosure. The hygro-thermo sensor determines the humidity/temperature and transfers these values into output signals 4 through 20 ma. The sensor is based on 2-wire technology and requires external 24V supply. The CMC II monitors the humidity/temperature, indications in [%] 0 100. The CMC II has two analog inputs 4 20 ma. An external power pack DK 7200240/248 is required in order to operate the sensor. Technical data: Rated voltage: 20 28V DC Rated current: 44 ma Output signal: 4 20 ma corresp. to 0 100% humidity The airflow monitor determines whether the fan is achieving its full operating capacity. Fan motors only have a limited service life. Storage damage, dirty filter mats or jammed fan blades are promptly detected and reported by the sensor. The sensor is supplied with 24V DC voltage and relays this to the CMC II or extension card DK 7200913 as an output signal. An external power pack DK 7200240/ 248 is required in order to operate the sensor. In the event of interference caused by overvoltage, the connected active network components are protected. With the relay message contact, undervoltage and any malfunctions caused by overvoltage can be reported in the network via the CMC II (SNMP trap). A green lamp on the strip indicates that the device is operational. In the CMC II enclosure, the CMC II reports the alarm via an acoustic signal, an LED and a message text. In this way, counteractive action can be initiated immediately. The second protective device is the interference suppressor filter, which protects valuable equipment as a passive component. Technical data: Number of outlets: 9 Length of strip: 25.59"/50mm Rated voltage: 230V AC, 50/60 Hz Temperature sensor 8 ft/2.5m power cord 7200300 8 ft/2.5m power cord and RJ 12 jack for 7200301 cable management DK 7200411 Technical data: Type: NTC Resistance: 10 kohm at 25 C Tolerance: ± 1 C Connection lead: LiYY 0.25mm 2 Hygro-thermo sensor w/o connection cable 7200360 6.5 ft/2m power cord and RJ 12 jacks for 7200362 cable management DK 7200411 4 20 ma corresp. to 0 50 C Measuring range: 10 90% humidity; 0 50 C Operating temperature: 32 F to 122 F/0 C to +50 C CMC II Power Strip With Interference Suppressor Filter And Overvoltage Protection Airflow monitor/ 7200530 Electrical contact Technical data: Rated voltage: 24V DC ± 15% Rated current maximum: 100 ma Note: If the sensor is not operated via the extension card, the fan must not be regulated. CMC II power strip 7200630 Rated current: 16A Relay alarm output: RJ 11 jack Load capacity of relay: 50V DC 100 ma Technical data: Overvoltage protection: Arrester utilization category: D Surge current resistance per conductor: 2.5 ka Maximum surge current resistance: 8 ka The following are also required for connecting to the base unit: connector kit for base unit, 7200223 RJ 11 connector with 5m cable, 7200420 69

Smoke Alarm Sensor Smoke Alarm Sensor Access Sensor CMC II Alarm Signal Lamp The smoke alarm sensor is an optical smoke alarm consisting of an internal measuring chamber (with infrared LED and photodiode) and an electronic circuit board. If smoke enters the chamber, an LED light pulse is partially deflected by the smoke particles, causing it to strike the photodiode, which in turn triggers further light pulses. If these light pulses strike the photodiode again, smoke generation is signalled to the CMC II and an alarm is triggered. An external power pack DK 7200240/248 is required in order to operate the sensor. Vibration sensors are suitable for all fastened panels in the network enclosure. If possible, they should be fastened to the center of the sidewall or door. If the enclosure is vibrated, the contact inside the sensor closes the circuit and triggers an alarm. The sensitivity of the contact is individually adjustable by means of an adjusting screw which presses onto a leaf spring. The sensor is an economic solution for monitoring vandalism. The high-quality electronic parts of the CMC II transfers vibrations of different intensity into a CMC II alarm. Access sensors monitor doors, sidewalls or windows in the network enclosure. The magnet is secured to the moving part (e.g. sidewall), while the reed contact is fastened to the immobile part (enclosure frame). The permanent magnet holds the reed contact in a closed position. If the door is opened or the sidewall removed, the reed contact drops out and opens the circuit, leading to an alarm in the CMC II. The alarm signal lamp serves as a collective fault signal for all alarms in the CMC II, e.g. overtemperature, fan defect, smoke alarm, etc. The CMC provides a user-friendly menu allowing the operator to select which message will affect the CMC II alarm relay. The alarm signal lamp is activated via the alarm relay. The lamp may be attached to the network enclosure or any other desired position, e.g. in the corridor. Smoke alarm sensor without power cord 7200310 6.5 ft/2m power cord and RJ 12 jack for 7200312 cable management DK 7200411 Configuration: 1 smoke alarm sensor including assembly parts. Smoke alarm sensor with VdS-approval Technical data: Rated voltage: 24V DC Rated alarm current: 61 ma Vibration sensor PU without power cord 4 7200320 6.5 ft/2m power cord and RJ 11 jack for cable management 2 7200322 DK 7200411 Caution new generation DK 7200322: only one sensor per CMC II may be connected. The sensor has an integral RJ 11 outlet and is self-adjusting. Access sensor PU without power cord 4 7200330 6.5 ft/2m power cord and RJ 11 jack for cable management 2 7200332 DK 7200410 * Lead times upon request. Note: new generation DK 7200332: The sensor has two RJ 11 outlets for easy creation of an access hasp. Lamp Part No. SZ LED steady light 2372000 component 24V DC Connection component 2368010 70

Lock Systems CMC II ENCLOSURE MONITORING SYSTEM TS Ergoform-S Comfort Handle With Electromagnetic Locking 50 50 42 42 87 79.2 ± 0.1 4 8 4.2 Extra holes for electronic lock (PS/QR) 18 ± 0.1 6 Universal Lock Unit In two versions: TS8 comfort handle for all TS8 enclosures and Ergoform-S handle for all QR and PS. The lock unit consists of a Rittal handle system where the handle is electro-magnetically locked. With the door closed and the handle locked home, locking is activated by a solenoid. An access sensor (DK 7200330/332) is always required for monitoring the door. The CMC II enables the handle to be pulled out by deactivating the solenoid, thus allowing the door to be opened. Deactivation can be initiated via an access unit such as a smartcard reader, magnetic card reader, coded lock and/ or network management systems. The handle system also contains a handle monitor. The CMC II reports an alarm if the handle is not locked home after closing the door. The pushbutton insert supplied can also be exchanged for security inserts. The handles always require an external 24V DC power pack DK 7200240/248. Note: When using the Ergoform-S handle, extra punchings are required. Technical data: Rated voltage: 24V DC Rated current maximum: max. 100 ma (TS comfort handle) Rated current maximum: max. 100 ma (Ergoform-S handle) The security lock consists of a base unit and a lock counterpart. The base unit is attached to the enclosure frame, while the lock counterpart is attached to the door. The base unit can be activated via the CMC. The statement open at zero current/closed at zero current can be set mechanically. Supply includes: Base unit, lock counterpart, without mounting kit. Note: Mounting kits for the various different enclosure types and enclosure doors are shown opposite. TS comfort handle 7200550 Ergoform-S handle 7200350 Ergoform-S handle for QR 7200650* TS comfort handle with connection cable and RJ 12 connector 7200551 for cable management module DK 7200411 Ergoform-S handle with connection cable and RJ 12 connector 7200351 for cable management module DK 7200411 PS viewing door H x W 79 x 32"/ 7200790* 2000 x 800mm, Ergoform-S handle PS viewing door H x W 87 x 32"/ 7200792* 2200 x 800mm, Ergoform-S handle * Lead times upon request. Note: The following lock rods are required for PS enclosures: Lock rods Design Bottom CMC locking rod for 79"/2000mm 7200371 high PS enclosures Other sizes upon request. Universal lock unit 7200610 Technical data: Rated voltage: 24V DC Rated current: 140 ma Installation kit PS sheet steel door 7200611 PS aluminum glass door 7200612 TS steel door 7200615 TS glass door 7200616 71

Smart Card Reader/Magnetic Card Reader/Coded Lock 25 190 50 50 190 166 83 8.5 4 120 The door handle is enabled for authorized persons who have identified themselves with a smart card/magnetic card/code. Smart card readers/magnetic card readers/coded locks are installed above the enclosure handle and can also serve as a central unit for enabling several doors. With network connection, the entire access procedure can also be registered with the CMC II. Note: Smart card readers/magnetic card readers/ coded locks may only be used in conjunction with the CMC II and an electromagnetically latched lock system. 3 cards are supplied with the smart card reader/magnetic card reader. Each card contains a 4-digit code which is different on all 3 cards. All cards are access-enabled. On the coded lock, the code can be entered directly. The authorized codes can be set in the CMC II via RS 232 or Telnet. The set code is transferred to the CMC II and, where applicable, to the network management system via the I 2 C bus. An external power pack DK 7200240/248 is always required. 190 35 50 190 166 83 50 8.5 4 120 Smart card reader 7200340 Magnetic card reader 7200341 Coded lock 7200342 Smart card reader with connection cable and RJ 12 connector for 7200380 cable management DK 7200411 Magnetic card reader with connection cable and RJ 12 connector 7200381 for cable management DK 7200411 Coded lock with connection cable and RJ 12 connector for 7200382 cable management DK 7200411 Technical data: Rated voltage: 24V DC Rated current maximum: max. 20 ma Interface: I 2 C-Bus Smart card type: I 2 C chip Magnetic card type: magnetic stripe cards with data on track 2 25 190 50 50 190 166 83 8.5 4 120 72

Monitoring Made Simple... EASY CMC SECURITY SYSTEM Easy CMC Plug-In Power Supply Unit For Easy CMC The new Easy CMC offers cost-effective basic monitoring across the entire band-width of enclosure applications, with its many functions and installation variants. We have the right model to suit every application, be it electronic, industrial, network or server enclosures. The system monitors temperature and offers an open interface for UPS systems, climate control equipment, smoke sensors, etc. via the digital inputs. The system relays the alarm both acoustically, as a text in the LCD display, and visually via an LED in the display. For enclosures with sheet steel doors or perforated doors, safety handles with an optical display can also be used to allow optimum control of the enclosure from the outside. In order to represent alarm messages from the Easy CMC on a data network with SNMP, a link via the CMC II DK 7200100 is possible. 7 Easy CMCs may be connected to the base unit CMC II. If two extension units DK 7200913 are used, up to 33 Easy CMCs may be connected. In this respect, the network technology with the standard protocol TCP/IP offers great benefits in terms of alarm forwarding. of the configurations: 1U variant The system may be mounted in all 19"/ 482.6mm sections; in enclosures with a glass door, the status of the monitoring system can be read via the LCD. Top hat rail attachment model The system is suitable for mounting on mounting panels with cross rails TS 35/15. A safety handle with optical display may be used to relay the alarm. IT tower protection model This system is designed for integration into the door frame of the Rittal IT Tower. The upper door frame bracket is simply exchanged for the Easy CMC. There are two models available for enclosure width 22 or 16"/550 or 400mm. The plug-in power supply unit is available in two variants, for an input voltage of 230V AC, 50/60 Hz and for an input voltage of 115V AC, 50/60 Hz. In both variants, the power pack supplies a stabilized output voltage of 24V DC and is ideally tailored to the Easy CMC. A power supply unit is required for each Easy CMC. Easy CMC models 1U 7201100 Top hat rail attachment 7201110 IT tower protection Enclosure width 550mm 7201120 IT tower protection Enclosure width 400mm 7201130 Functions: Temperature monitoring: The system contains an NTC temperature sensor. The current temperature is shown on the LCD display and monitored for minimum and maximum limits. Settings: The limits are set using the 3 keys positioned in the front of the system. Open digital inputs: There are 2 digital inputs available for other messages. Sensors/equipment with a floating contact may be connected. UPS system, climate control system, and more. Smoke sensor DK 7200310 Access sensor DK 7200330 Airflow monitor DK 7200530 Alarm output: The CMC II DK 7200100 can be connected to the digital output. In this way, alarms in the network can be forwarded to a control center via TCP/IP SNMP. Alarm signal output: The optical alarm signal can also be positioned with the safety handles to the outside to enable clear alarm monitoring with bayed enclosure suites. The safety handles are automatically fitted with code access and a master key. Safety handle TS8 comfort DK 7201800 Safety handle Ergoform-S DK 7201810 Technical data: Interface: I 2 C bus Rated voltage: 24V DC Accessories required: Power pack 24V DC DK 7201200/210 depending on the input voltage. Power supply unit for Easy CMC 230V AC, 50/60 Hz/ 7201200 24V DC 115V AC, 50/60 Hz/ 7201210 24V DC* * Converter has an IEC 320 plug on the AC side and a stereo style plug into the Easy CMC. 73

TS8 Comfort Safety Handle/Ergoform-S Safety Handle The new safety handle is available in two models: TS8 comfort handle for all TS8 enclosures Ergoform-S handle for QR and PS. The system is distinguished by its flexible access opportunities. The 3-digit code allows access to the enclosure without the need for a key. The code can be set individually with the door open. Alternative access is provided by the master key function. The door can be opened with the handle via a semi-cylinder, irrespective of the code. A semi-cylinder of 1.57" or 1.77"/40 or 45mm to DIN 18254 may be used. Easy retrofitting makes the handle ideal for ISP and ASP applications. The safety handle is an effective, inexpensive solution. TS8 Comfort Safety Handle/Ergoform-S Safety Handle For The Easy CMC The safety handle has an integral optical signal lamp which supports the relay of a collective alarm from the Easy CMC. This provides an optimum overview of alarm status on the enclosure front. Additionally, the safety handles offer a security access system. The handle is available in two variants: TS8 comfort handle for all TS8 enclosures Ergoform-S handle for QR and PS. The system is distinguished by its flexible access. The 3-digit code allows access to the enclosure without the need for a key. The code can be set individually with the door open. Alternative access is provided by the master key function. The door can be opened with the handle via a semi-cylinder, irrespective of the code. A semi-cylinder of 40 or 45mm to DIN 18 254 may be used. Interface to the Easy CMC alarm signal output: The safety handle can be connected to the alarm signal output of the Easy CMC (DK 7201100 and DK 7201110). This enables structured control of the optical alarm system in bayed enclosure suites, irrespective of the enclosure configuration. Safety handle TS8 comfort handle 7200800 Ergoform-S handle 7200810 Safety handle for Easy CMC TS8 comfort handle 7201800 Ergoform-S handle 7201810 74

Technical Drawings TECHNICAL APPENDIX TS8 Server Cabinets H W Front View A C Rear View 465.0 ±1.6 EIA Spacing 450.0 Min. Spacing B Side View Part No. Part No. U Height (H) Width (W) Depth (D) A B C with without sidewalls sidewalls RAL 7035 light grey 9968598 9968599 42 2000 600 900 1912 512 812 9968614 9968615 42 2000 600 1000 1912 512 912 9968602 9968603 42 2000 800 900 1912 712 812 9968618 9968619 42 2000 800 1000 1912 712 912 9968606 9968607 47 2200 600 900 2112 512 812 9968622 9968665 47 2200 600 1000 2112 512 912 9968610 9968611 47 2200 800 900 2112 712 812 9968625 9968626 47 2200 800 1000 2112 712 912 Cool black 9968600 9968601 42 2000 600 900 1912 512 812 9968616 9968617 42 2000 600 1000 1912 512 912 9968604 9968605 42 2000 800 900 1912 712 812 9968620 9968621 42 2000 800 1000 1912 712 912 9968608 9968609 47 2200 600 900 2112 512 812 9968623 9968624 47 2200 600 1000 2112 512 912 9968612 9968613 47 2200 800 900 2112 712 812 9968627 9968628 47 2200 800 1000 2112 712 912 D 75

Technical Drawings TECHNICAL APPENDIX TS8 Network Cabinets H W Front View 76.1 Perforation A D C Rear View 465.0 ±1.6 EIA Spacing 450.0 Min. Spacing B Side View Part No. Part No. U Height (H) Width (W) Depth (D) A B C with without sidewalls sidewalls RAL 7035 light grey 9968629 9968630 42 2000 600 900 1912 512 812 9968645 9968646 42 2000 600 1000 1912 512 912 9968633 9968634 42 2000 800 900 1912 712 812 9968649 9968650 42 2000 800 1000 1912 712 912 9968637 9968638 47 2200 600 900 2112 512 812 9968653 9968654 47 2200 600 1000 2112 512 912 9968641 9968642 47 2200 800 900 2112 712 812 9968657 9968658 47 2200 800 1000 2112 712 912 Cool black 9968631 9968632 42 2000 600 900 1912 512 812 9968647 9968648 42 2000 600 1000 1912 512 912 9968635 9968636 42 2000 800 900 1912 712 812 9968651 9968652 42 2000 800 1000 1912 712 912 9968639 9968640 47 2200 600 900 2112 512 812 9968655 9968656 47 2200 600 1000 2112 512 912 9968643 9968644 47 2200 800 900 2112 712 812 9968659 9968660 47 2200 800 1000 2112 712 912 76

Technical Drawings TECHNICAL APPENDIX TS8 Co-Location Cabinets (One Door) H H A 425 A a a T 538 538 Front View Rear View Side View T d 600 d 600 d d 19 19 597 Top View Height (H) Depth (T) h HE a b c d in inches/mm in inches/mm 7831436 79.1/2010 35.6/ 905.5 75.2/1912 42 70.9/1800 52.2/1327 27.3/693.5 4.2/106 7831438 79.1/2010 39.6/1005.5 75.2/1912 42 70.9/1800 52.2/1327 31.2/793.5 4.2/106 7831440 87/2210 35.6/905.5 83.1/2112 47 78.7/2000 60.1/1527 35.1/893.5 6.1/156 7831442 87/2210 39.6/1005.5 83.1/2112 47 78.7/2000 60.1/1527 35.1/893.5 6.1/156 HE HE h h 30 30 30 30 *c=max. distance between outer mounting levels = 793.5 73 73 219.5 219.5 b b 219.5 219.5 fl 112 fl 112 Hole Cut-Out View 77

Technical Drawings TECHNICAL APPENDIX TS8 Co-Location Cabinets (Two Door) 2209.2 2209.2 A B 905.5 905.5 C C 442 442 597 600 19 19 597 954 A B 7831450 47U/two door 1135.5 909.8 45.3 936.8 936.8 538 538 Front View Rear View Side View 600 View A-A 954 *c=max. distance between outer mounting levels = 793.5 1135.5 909.8 45.3 936.8 936.8 View B-B 1010 1005 1043.8 1010 1043.8 1068.3 1005 1068.3 677 677 1169.5 1169.5 702 702 119.5 119.5 73 73 301 View C-C 78

Technical Drawings TECHNICAL APPENDIX TS8 Co-Location Cabinets (Four Door) 2209.2 2209.2 E A D B 905.5 905.5 C C 442 597 600 19 19 597 409 A D B E 1680.6 1135.5 590.4 45.3 364.7 447.8 447.8 447.8 447.8 538 Front View Rear View Side View 600 View A-A 409 1680.6 1135.5 590.4 364.7 45.3 447.8 447.8 447.8 447.8 View B-B 485 517.8 485 460 460 481 517.8 525 460 525 525 460 525 544.3 481 544.3 *C=max. distance between outer mounting levels = 793.5 150 152 152 177 177 177 177 177 73 119.5 644.5 177 644.5 73 119.5 1169.5 1169.5 1694.5 1694.5 View D-D View E-E View C-C 7831460 47U/four door 79

Technical Drawings TECHNICAL APPENDIX TS8 PC Cabinets With fold-down shelf Part No. 8366100, 8368100 439 300 841 605 i.l.512 454 386 362 64 308 1605 With sheet steel front/ drawer Part No. 8366400 500 841 150 With pull-out drawer Part No. 8366000, 8368000 366 190 *Adjustable on a 1"/25mm system hole pattern. **Adjustable by +8.86"/225mm or +11.81"/300mm. Part No. Configuration Keyboard Exact outside dimensions storage inches mm H W D H W D 8366100* Safety glass Fold-down 63 24 25 1600 600 636 8368100* Safety glass Fold-down 63 24 33 1600 600 836 8366000* Safety glass Drawer 63 24 25 1600 600 636 8368000* Safety glass Drawer 63 24 33 1600 600 836 8366400* Solid panel Drawer 63 24 25 1600 600 636 8366300* Control panel Drawer 63 24 25 1600 600 636 8366200* Safety glass Console 63 24 25 1600 600 636 *UL/cUL/CSA approval pending. PC ValuePack Cabinets 591 125 605 i.l. 512 455 362 599 i. L. 512 410 1605 82 425 803 330 379 624 i.l.512 380** 397 422** 157 636 287 1005 With control panel/drawer Part No. 8366300 150 150 841 439 558 100 605 i.l. 512 454 386 362 362 647 (847) i. L. 502 (702) 64 308 112 1605 150 150 589 841 589 841 605 i.l. 512 460 384 362 605 i.l. 512 460 384 362 64 458 64 458 1605 1605 122 558 833 With fixed console Part No. 8366200 1512 max. 505* max. 505* 624 (824) i.l. 512 max. 549* 70 636 (836) 624 i.l. 512 max. 549* 636 894 177 11 924 (270) 854 908 939 318 205 863 1604 Part No. H inches/mm W inches/mm D inches/mm 9968185/9968187 63/1600 24/600 26/650 9968186/9968188 63/1600 24/600 33/850 492 620 (820) 80

Technical Drawings TECHNICAL APPENDIX PS Server Cabinets Note: For individual cabinet dimensions, please refer to pages 15-16. b Front View RAL 7035 light grey a c Left Side View (Side Panel Excluded) Rear View Depth Adjustable Rail Location Depth Adjustable Rail Location Top View Part No. Part No. U Dimensions a b c with without inches mm sidewalls sidewalls H W D H W D 9967542 9967541 38 75 24 36 1905 600 900 1775 512 812 9967539 9967540 38 75 24 40 1905 600 1000 1775 512 912 9967544 9967543 42 83 24 36 2100 600 900 1975 512 812 9967197 9967198 42 83 24 40 2100 600 1000 1975 512 912 9967890 9967889 42 83 28 36 2100 700 900 1975 612 812 9967894 9967893 42 83 28 40 2100 700 1000 1975 612 912 9967892 9967891 42 83 32 36 2100 800 900 1975 712 812 9968344 9968343 42 83 32 40 2100 800 1000 1975 712 912 9967949 9967948 47 88 24 36 2235 600 900 2175 512 812 9968354 9968353 47 88 24 40 2235 600 1000 2175 512 912 9967953 9967952 47 88 28 36 2235 700 900 2175 612 812 9968356 9968355 47 88 28 40 2235 700 1000 2175 612 912 9967957 9967956 47 88 32 36 2235 800 900 2175 712 812 9968358 9968357 47 88 32 40 2235 800 1000 2175 712 912 Cool black Part No. Part No. U Dimensions a b c with without inches mm sidewalls sidewalls H W D H W D Inquire Inquire 38 75 24 36 1905 600 900 1775 512 812 Inquire Inquire 38 75 24 40 1905 600 1000 1775 512 912 9967829 9967830 42 83 24 36 2100 600 900 1975 512 812 9967827 9967828 42 83 24 40 2100 600 1000 1975 512 912 9968170 9968169 42 83 28 36 2100 700 900 1975 612 812 9968174 9968173 42 83 28 40 2100 700 1000 1975 612 912 9968172 9968171 42 83 32 36 2100 800 900 1975 712 812 9968346 9968345 42 83 32 40 2100 800 1000 1975 712 912 9967951 9967950 47 88 24 36 2235 600 900 2175 512 812 9968360 9968359 47 88 24 40 2235 600 1000 2175 512 912 9967955 9967954 47 88 28 36 2235 700 900 2175 612 812 9968362 9968361 47 88 28 40 2235 700 1000 2175 612 912 9967959 9967958 47 88 32 36 2235 800 900 2175 712 812 9968364 9968363 47 88 32 40 2235 800 1000 2175 712 912 Top View 81

Technical Drawings TECHNICAL APPENDIX PS Network Cabinets RAL 7035 light grey U Dimensions a b c d with without inches mm sidewalls sidewalls H W D H W D 9967600 9967601 24 47.2 23.6 23.6 1200 600 600 46.25"/1175mm 43.8"/1112mm 1.7"/43mm 42.3"/1075mm 9967602 9967603 24 47.2 23.6 31.5 1200 600 800 46.25"/1175mm 43.8"/1112mm 1.7"/43mm 42.3"/1075mm 9967604 9967605 24 47.2 31.5 31.5 1200 800 800 46.25"/1175mm 43.8"/1112mm 1.7"/43mm 42.3"/1075mm 9967606 9967607 38 70.1 23.6 23.6 1800 600 600 46.25"/1775mm 67.4"/1712mm 2.6"/67mm 65.9"/1675mm 9967608 9967609 38 70.1 23.6 31.5 1800 600 800 46.25"/1775mm 67.4"/1712mm 2.6"/67mm 65.9"/1675mm 9967610 9967611 38 70.1 31.5 31.5 1800 800 800 46.25"/1775mm 67.4"/1712mm 2.6"/67mm 65.9"/1675mm 9967612 9967613 42 78.7 23.6 23.6 2000 600 600 77.8"/1975mm 75.3"/1912mm 3"/75mm 73.8"/1875mm 9967614 9967615 42 78.7 23.6 31.5 2000 600 800 77.8"/1975mm 75.3"/1912mm 3"/75mm 73.8"/1875mm 9967616 9967617 42 78.7 31.5 31.5 2000 800 800 77.8"/1975mm 75.3"/1912mm 3"/75mm 73.8"/1875mm 9967618 9967619 47 86.6 23.6 23.6 2200 600 600 85.6"/2175mm 83.1"/2112mm 3.3"/83mm 81.7"/2075mm 9967620 9967621 47 86.6 23.6 31.5 2200 600 800 85.6"/2175mm 83.1"/2112mm 3.3"/83mm 81.7"/2075mm 9667622 9967623 47 86.6 31.5 31.5 2200 800 800 85.6"/2175mm 83.1"/2112mm 3.3"/83mm 81.7"/2075mm Cool black H W 735 a 25.5 46.5 b 45 38.5 29 x 25 = 725 38.5 100 D Part No. U Dimensions a b c d DK inches mm with sidewalls H W D H W D 9967695 42 78.7 23.6 23.6 2000 600 600 77.8"/1975mm 75.3"/1912mm 3"/75mm 73.8"/1875mm 9967694 42 78.7 23.6 31.5 2000 600 800 77.8"/1975mm 75.3"/1912mm 3"/75mm 73.8"/1875mm 9967696 42 78.7 31.5 31.5 2000 800 800 77.8"/1975mm 75.3"/1912mm 3"/75mm 73.8"/1875mm 9967697 47 86.6 23.6 31.5 2200 600 800 85.6"/2175mm 83.1"/2112mm 3.3"/83mm 81.7"/2075mm Note: Please inquire for additional cool black cabinet configurations/sizes. 25 30 65 c x 25 = d 63.5 812 27 x 25 = 675 73.5 62 27 x 25 = 675 i.l 712 62 60 i.l 702 50 82

Technical Drawings TECHNICAL APPENDIX PS Co-Location Cabinets (One Door) Front/Rear View Left Side View (Side Panel Excluded) 802.0 Depth Adjustable Rail Location 512.0 451.0 Part No. Color 9967544 42U/one door RAL 7035 light grey 9967829 42U/one door Cool black 83

Technical Drawings TECHNICAL APPENDIX PS Co-Location Cabinets (Two Door) Front/Rear View Left Side View (Side Panel Excluded) 802.0 Depth Adjustable Rail Location 451.0 512.0 Part No. Color 9967658 42U/two door RAL 7035 light grey 9968294 42U/two door Cool black 84

Technical Drawings TECHNICAL APPENDIX PS Co-Location Cabinets (Three Door) Front/Rear View Left Side View (Side Panel Excluded) 802.0 Depth Adjustable Rail Location 512.0 451.0 Part No. Color 9967659 42U/three door RAL 7035 light grey 9968295 42U/three door Cool black 85

Technical Drawings TECHNICAL APPENDIX PS Co-Location Cabinets (Four Door) Front/Rear View Left Side View (Side Panel Excluded) 802.0 Depth Adjustable Rail Location 512.0 451.0 Part No. Color 9967660 42U/four door RAL 7035 light grey 9968296 42U/four door Cool black 86

Technical Drawings TECHNICAL APPENDIX PS Seismic/Zone 4 Rated Cabinets 512.00 1912.00 Front View 799.90 Top View 474.00 Part No. 38U DK inches mm H W D H W D 9967632 72 24 36 1800 600 900 9967633 72 32 36 1800 800 900 42U 9967634 78 24 36 2000 600 900 9967661 78 32 36 2000 800 900 802.00 Side View 450.25 649.75 550.00 168.50 87

Technical Drawings TECHNICAL APPENDIX QuickRack Server Racks 600 450 385 1241.5 (1991.5) 1241.5 (1991.5) 585 650 101.5 850 185 900 600 900 450 385 585 650 101.5 850 185 385 385 63 63 465 465 518 518 550.1 550.1 600 600 740 740 i.l. 1100 (1850) i.l. 1100 (1850) ca. 820 900 900 Part No. Color 7528900 RAL 7035 light grey Without sidewalls 7528950 Cool Black With sidewalls 88

Technical Drawings TECHNICAL APPENDIX QuickRack Cabinets H W X Y 20.0 C (i.l.) Part No. QR Part No. QR Dimensions Inside cabinet Width Height with without inches mm.dimension C of glass door X of glass door Y sidewalls sidewalls H W D H W D inches mm inches mm inches mm 9967140 7503770 47.2 23.6 23.6 1200 600 600 43.3 1100 16.7 425 39.4 1000 9966977 9966978 47.2 23.6 23.6 1200 600 600 43.3 1100 16.7 425 39.4 1000 9967139 7503773 47.2 31.5 31.5 1200 800 800 43.3 1100 24.6 625 39.4 1000 9966979 9966980 47.2 31.5 31.5 1200 800 800 43.3 1100 24.6 625 39.4 1000 9967138 7503778 78.7 23.6 23.6 2000 600 600 74.8 1900 16.7 425 70.9 1800 9966971 9966972 78.7 23.6 23.6 2000 600 600 74.8 1900 16.7 425 70.9 1800 9967137 7503779 78.7 23.6 31.5 2000 600 800 74.8 1900 16.7 425 70.9 1800 9966973 9966974 78.7 23.6 31.5 2000 600 800 74.8 1900 16.7 425 70.9 1800 9967135 7503781 78.7 31.5 31.5 2000 800 800 74.8 1900 24.6 625 70.9 1800 9966975 9966976 78.7 31.5 31.5 2000 800 800 74.8 1900 24.6 625 70.9 1800 9967134 7503782 86.6 23.6 23.6 2200 600 600 82.7 2100 16.7 425 78.7 2000 9966967 9966968 86.6 23.6 31.5 2200 600 800 82.7 2100 16.7 425 78.7 2000 9967133 7503783 86.6 23.6 31.5 2200 600 800 82.7 2100 16.7 425 78.7 2000 9966969 9966970 86.6 31.5 31.5 2200 800 800 82.7 2100 24.6 625 78.7 2000 9967131 7503785 86.6 31.5 31.5 2200 800 800 82.7 2100 24.6 625 78.7 2000 QuickRack Roof Dimensions D Width x depth Outside Width without Width inside frame Outside Inside frame Inside frame width inches sidewalls inches uprights inches depth inches posts inches roll-form inches W W1 W2 D D1 D2 23.62 x 23.62 23.62 23.46 21.50 18.90 17.22 17.72 23.62 x 31.50 23.62 23.46 21.50 31.50 26.80 25.60 31.50 x 31.50 31.50 31.30 29.40 31.50 26.80 25.60 C D 21 D2 4 25 2 20 W2 W1 W 10 D1 10 2 89

Technical Drawings TECHNICAL APPENDIX BasicRacks Part No. BR Dimensions a b inches mm H W D H W D 9967637 48 20 15 1219 508 381 17.75"/450.9mm 18.31"/465.1mm 9967638 48 20 15 1219 508 381 17.75"/450.9mm 18.31"/465.1mm 9967635 84 20 15 2134 508 381 17.75"/450.9mm 18.31"/465.1mm 9967636 84 20 15 2134 508 381 17.75"/450.9mm 18.31"/465.1mm Data Racks U a b U x 44.45 7391000 31 59"/1499.5mm 54.4"/1381.5mm 1377.95 7396000 36 67.8"/1721.8mm 63.1"/1603.8mm 1600.2 7400000 40 74.8"/1899.5mm 70.1"/1781.5mm 1778 7445000 45 83.5"/2121.8mm 78.9"/2003.8mm 2000.25 a 515 515 I.L.450 b a b Flange edge to flange edge Mounting hole to mounting hole 79.4 75 75 550 60 50mm spacing min. 150-max. 350 225 750 78 90

Technical Drawings TECHNICAL APPENDIX RiPatch 204.5 100 50 232 25 1902.5 100 2002.5 300 40 450 Min 150 300 450 100 400 500 600 Max 51.5 25.75 497 548.5 Side View Front View Rear View 15.88 2172.5 9.5 SQ. Holes 12.7 31.75 44.45 Detail Detail 'A' A 31.75 42 Fixing Positions for Cable Management Arms on 44.45 Pitch =1822.5 U H W D 7925010 42 85.5" 24" 18" 515 350 145 580 560 450 Open Area Bottom View View Detail 'A' 41 Pitches of 44.45 = 1822.5 300 42U Panel Space =1866.9 400 1902.5 2002.4 39 Pitches of 44.45 = 1733.55 1802.5 1852.5 1902.5 1952.5 2 Pitches of 150 = 300 4 Pitches of 100 = 400 91

Technical Drawings TECHNICAL APPENDIX QuickBox Enclosures HE Part No. QB with viewing door Part No. QB with solid door 485 465 450 400 53 A 80 266.7 58.9 60 50 9 HE 50 72.5 300/400/600 4X30 50 25 50 230/330/530 250/350/550 18 h3 14 562 435 U SU Height Width Depth h1 h2 h3 h4 7502016 7502116 6 10 14.25"/362mm 23.62"/600mm 23.62"/600mm 9.53"/242mm 9.21"/234mm 10.51"/267mm 10.75"/273mm 7502026 7502126 9 15 19.49"/495mm 23.62"/600mm 23.62"/600mm 14.76"/375mm 14.45"/367mm 15.75"/400mm 15.98"/406mm 7502036 7502136 12 20 24.75"/628mm 23.62"/600mm 23.62"/600mm 20.00"/508mm 19.72"/501mm 21.02"/534mm 21.26"/540mm 7502046 7502146 15 26 30.00"/762mm 23.62"/600mm 23.62"/600mm 25.28"/642mm 24.96"/634mm 26.26"/667mm 26.50"/673mm 7502056 7502156 18 31 35.24"/895mm 23.62"/600mm 23.62"/600mm 30.51"/775mm 30.20"/767mm 31.50"/800mm 31.73"/806mm 7502066 7502166 21 36 40.47"/1028mm 23.62"/600mm 23.62"/600mm 35.75"/908mm 35.47"/901mm 36.77"/934mm 37.00"/940mm 80 18 16.5 56.5 60.3 h2 h1 h-7 595 391 540 391 H 40 44.5 70 80 50 600 500 h3 I.L.h4 92

Technical Drawings TECHNICAL APPENDIX EL NEMA 12 3-Part Cabinets H HE 27 x 25=600 27 x 25=465 27 x 25=450 79 275 77.5 25 786 725 b a 135 c 600 416 Max. installation depth 464mm 100 Part No. Available Dimensions a b c DK space inches mm H W D H W D 7706024 6U 13.6 23.6 23.6 345 600 600 10.8"/274mm 11.8"/299mm 3.9"/99.5mm 7709024 9U 18.9 23.6 23.6 480 600 600 16"/407mm 17"/432mm 4"/103.5mm 7712024 12U 23.6 23.6 23.6 600 600 600 21.3"/540mm 22.2"/565mm 4.7"/120mm 7715024 15U 29.4 23.6 23.6 746 600 600 26.5"/674mm 27.5"/699mm 5"/124.5mm 7718024 18U 34.6 23.6 23.6 878 600 600 31.8"/807mm 32.8"/832mm 5.1"/128.5mm 7721024 21U 40 23.6 23.6 1016 600 600 37"/941mm 38"/965mm 5.2"/133mm 54 93

Technical Drawings TECHNICAL APPENDIX EL Non-NEMA 3-Part Cabinets H HE 27 x 25=600 27 x 25=465 27 x 25=450 Part No. Available Dimensions a b c DK space inches mm 79 275 77.5 25 786 725 H W D H W D 7709635 9U 18.9 23.6 24.2 480 600 615 16"/407mm 17"/432mm 4"/103.5mm 7715635 15U 29.4 23.6 24.2 746 600 615 26.5"/674mm 27.5"/699mm 5"/124.5mm 7721635 21U 40 23.6 24.2 1016 600 615 37"/941mm 38"/965mm 5.2"/133mm b a 135 c 615 416 Max. installation depth 464mm 100 54 94

Technical Information TECHNICAL APPENDIX NEMA Standards Enclosure NEMA rating National Electrical Manufacturers Association (NEMA 250) Type 1 Type 2 Type 3 Type 3R Type 4 Type 4X Type 6 Type 12 Enclosures are intended for indoor use primarily to provide a degree of protection against the contact with the enclosed equipment. Enclosures are intended for indoor use primarily to provide a degree of protection against limited amounts of falling water and dirt. Enclosures are intended for outdoor use primarily to provide a degree of protection against rain, sleet, windblown dust, and damage from external ice formation. Enclosures are intended for outdoor use primarily to provide a degree of protection against rain, sleet, and damage from external ice formation. Enclosures are intended for indoor and outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water, hose-directed water, and damage from external ice formation. Enclosures are intended for indoor and outdoor use primarily to provide a degree of protection against corrosion, windblown dust and rain, splashing water, hose-directed water, and damage from external ice formation. Enclosures are intended for indoor and outdoor use primarily to provide a degree of protection against hose-directed water, the entry of water during occasional temporary submersion at a limited depth, and damage from external ice formation. Enclosures are intended for indoor use primarily to provide a degree of protection against circulating dust, falling dirt, and dripping non-corrosive liquids. Type 13 Enclosures are intended for indoor use primarily to provide a degree of protection against dust, spraying water, oil and non-corrosive liquids. Reprinted with permission from National Electrical Manufacturers Association. Foamed-In-Place Gasket The foamed-in-place gasket is a thixotropic, two component modified polyurethane resin system. The gasket, being of a closed cell design, is excellent where very low water absorption is required. Other features of the gasket include: 1. Superior resilience, excellent compression recovery, provides a better seal. 2. Excellent adhesion to many substrates. 3. No seams or joints to leak-continuous bead. 4. Normal operating temperature of polyurethane foamed-in-place gasket is -40 C to +60 C (-40 F to +140 F). The polyurethane gasket provides excellent protection against the following chemicals: Animal and vegetable oils Acrylates Alkyd resins Hydrocarbon solvents Buty acetate Diacetone alcohol Epoxide oils Epoxy resins Epoxy esters Heptane Mineral oils Polyamide resins Polymeric plasticizers Turpentine Xylene Toluene Mehanol Propanol For additional applications not listed here, contact the Rittal Technical Hotline at 1-800-637-4425. For more information, contact the Rittal Technical Hotline 1-800-637-4425. 95

Shock And Vibration Technical Information TECHNICAL APPENDIX In many locations, sensitive electric and electronic equipment must often be protected against mechanical influences. This is especially important for equipment that is part of the infrastructure. As the world's largest enclosure manufacturer, Rittal has focused on the protection of electric and electronic equipment in enclosures to provide the best possible security against shock and vibration (such as in earthquakes). Dynamic stress can be divided into: Short-term stress Shock conditions in shelters and machines Earthquakes Long-term stress Stationary operation (machines in vicinity) Transport Intermittent disturbances (when generators start or stop) Vibration can be damaging to both the functioning and the mounting of equipment in enclosures. It is possible to prevent vibration or achieve targeted damping when the inherent frequencies and types of vibration of an enclosure under stress are known. Zone 4 Cabinet Specifications Seismic Zone 4 Seismic Zone 3 Seismic Zone 2B Seismic Zone 2A Seismic Zone 1 Seismic Zone 0 Rittal has developed two retrofit kits for enclosures to meet shock and vibration damping requirements; each condition requires a different approach. The shock-damping retrofit kit consists of rigid components because stiffening measures provide the best protection against shocks. The vibrationdamping retrofit kit consists of flexible components which damp vibration. This flexible solution is the best way to damp vibrations with harmonic or periodic disturbances of approximately 15 Hz and higher. To date such vibration tests have been performed by: University of Bristol, England 3-axis vibration platform, 6 of freedom Technical University of Berlin, Germany 1-axis vibration platform, horizontal or vertical These institutes performed tests in accordance with the following specifications: Bellcore Technical Reference TR-NWT-000063 ANSI/IEEE Std. 344-1987 ANSI/IEEE Std. 693-1984 Parts of IEC 68 Please contact your local Rittal representative for more information or details on specific applications. Rittal offers NEBS GR-63 compliant Zone 4 cabinets as a standard product. These cabinets were tested at an approved test lab to fully comply with all of Zone 4 requirements for enclosures. These cabinets were loaded with 1000 lbs of weight to simulate one of the most strenuous applications found in today s networking environment. This 1000 lbs of weight was distributed with 50% of the weight below the center of gravity of the cabinet and the other 50% located above. Seismic map provided courtesy of FEMA. For more information, contact the Rittal Technical Hotline 1-800-637-4425. 96

Technical Information TECHNICAL APPENDIX 19" Rails/Shelf Installation 19" mount surface Shelf mounting surface Shelf Assembly Instructions Equipment Shelves Part No. Dimensions inches mm H D H D 7143000 16.1 12 409 305 7144000 16.1 16 409 406 7145000 16.1 20 409 508 9960935 16.1 24 409 610 PS Network And QuickRack Network Rails 24" and 32" (W) PS Cabinets only. Rails are fully adjustable. Tools Required Cordless Drill (> 12 Volt) #3 Phillips Bit 4mm Allen Wrench 10mm Wrench or 10mm Socket with Ratchet Handle Assembly Notes 1. Shelves are attached to both front and rear 19" mounting rails. 2. Installation hardware is included with each shelf. Parts will be left after shelf is installed. 3. Rails positioned for a 12" (D) shelf will also support a 16", 20" or 24" (D) shelf. Rails positioned for a 16" (D) shelf will also support the next two deeper shelves, etc. 4. Approximate times: Position 19" mounting rails 15 min. Install shelf 5 min. Shelf installation: no kit required Shelf Part Nos.: 7143, 7144, 7145, 9960935 Come with mounting hardware (32"/34" D). Telescoping slides Part Nos. (optional): 7051, 7061, 7081, 7161 Server Rails PS server rails are fully adjustable on systems chassis. Shelf installation: PS server: DK 4544 shelf installation kit for PS servers 7063850 Adjustable mounting rails for 19" rackmount Installation 1. Use a shelf to determine correct positions for front and rear rails. Rails are either secured directly to horizontal system chassis or to lateral top and bottom brackets. If rails are secured to chassis, use the drill and #3 Phillips bit to remove self-tapping screws, reposition rails and reinsert screws. If supported on brackets, use the 10mm wrench or socket and reposition entire rail assembly. 2. Install four (4) large Allen head bolts (from hardware bag) into shelf support cylinders. 3. Determine height of shelf and install the first support cylinder into the round hole on the rear flange of the rail (behind large square hole). Notch on the cylinder and drive head of bolt face into cabinet. Secure on opposite side of flange with slide nut ( C shaped fastener). Repeat for remaining three (3) cylinders on each rail. 4. Place shelf over cylinder bolts. Cutouts on shelf sides will fit over notches on cylinders. Slide shelf forward so small part of cutout is over cylinder notch. 5. Secure shelf with long sheet metal screw (in shelf hardware bag). Drive screw through shelf and behind cylinder. For more information, contact the Rittal Technical Hotline 1-800-637-4425. 97

Shelf Selection Guide 1. Select chart based on the type of cabinet you have, with or without 19" rails and if regular or heavy duty shelves are needed. 2. Select the width and depth of the cabinet you have. 3. Select style of shelf (vented or solid, and color). 4. Match shelf with corresponding accessories based on requirements (fixed or telescopic). Regular Shelves Mounted on system chassis, fixed or on telescopic slides: PS without 19" rails Cabinet W x D mm 600x600 600x800 600x900 600x1000 700x900 700x1000 800x800 800x900 inches 24x24 24x32 24x36 24x40 28x36 28x40 32x32 32x36 Vented Shelf RAL 7032 7165000 7166000 7166000 7166000 9967922 9967922 7186000 7186000 Solid Shelf RAL 7032 7265000 7266000 7266000 7266000 N/A N/A N/A N/A Vented Shelf RAL 7035 7165035 7166035 7166035 7166035 N/A N/A 7186035 7186035 Solid Shelf RAL 7035 7265035 7266035 7266035 7266035 N/A N/A N/A N/A Installation kit/sys. chassis 7796000 7798000 9967817 9967655 9967817 9967655 7798000 9967817 Telescopic slides 7081000 7161000 7161000 7161000 7161000 7161000 7161000 7161000 Above shelves indicate largest possible shelf that can be used, shorter shelves can also be used if required. Remember, when using shorter shelf you must use corresponding telescopic slide. For RAL 7035 components, replace last 3 digits with 035. Heavy Duty Shelves Mounted on system chassis, fixed or on telescopic slides: PS without 19" rails Technical Information TECHNICAL APPENDIX Cabinet W x D mm 600x600 600x800 600x900 600x1000 700x900 700x1000 800x800 800x900 inches 24x24 24x32 24x36 24x40 28x36 28x40 32x32 32x36 Vented Shelf RAL 7032 7465000 7466000 7466000 7466000 9967919 9967919 7486000 7486000 Solid Shelf RAL 7032 N/A N/A N/A N/A N/A N/A N/A N/A Vented Shelf RAL 7035 7465035 7466035 7466035 7466035 9967920 9967920 7486035 7486035 Solid Shelf RAL 7035 N/A N/A N/A N/A N/A N/A N/A N/A System chassis 4371000 4372000 9967817 9967655 9967817 9967655 4372000 9967817 Telescopic slides 7065000 7066000 7066000 7066000 7066000 7066000 7066000 7066000 Above shelves indicate largest possible shelf that can be used, shorter shelves can also be used if required. Remember, when using shorter shelf you must use corresponding telescopic slide. Regular Shelves 19" rackmount, fixed or on telescopic slides: PS, PS servers, ISP cabinets with 19" rails Cabinet W x D mm 600x600 600x800 600x900 600x1000 700x900 700x1000 800x800 800x900 inches 24x24 24x32 24x36 24x40 28x36 28x40 32x32 32x36 Vented Shelf RAL 7032 7145000 9960935 N/A N/A N/A N/A 9960935 N/A Vented Shelf RAL 7035 7145035 7145635 7145735/ 7145735/ 7145735/ 7145735/ 7145635 7145735/ 9967865 9967865 9967865 9967865 9967865 Vented Shelf RAL 9005 9967701 9967837 9967866 9967866 9967866 9967866 9967837 9967866 Telescopic slides 7081000 7161000 7161700 N/A N/A N/A 7161000 7161700 Support rails* 7063850 7063850 7063850 7063850 7063850 7063850 7063850 7063850 * Required only in PS server and ISP cabinets. Above shelves indicate largest possible shelf that can be used, shorter shelves can also be used if required. Remember, when using shorter shelf you must use corresponding telescopic slide. For more information, contact the Rittal Technical Hotline 1-800-637-4425. 98

Technical Information TECHNICAL APPENDIX Additional Powerstrips Part No. 7274135 Power strip, 6 REC., 15A/15A, USA, 120V, 15' cord, 19" rackmount, RAL 7035 light grey 7274235 Power strip, 6 REC., 15A/15A, USA, 120V, 6' cord w/ twist lock plug, 19" rackmount, RAL 7035 light grey 7274335 Power strip, 6 REC., 15A/15A, USA, 120V, 15' cord w/ twist lock plug, 19" rackmount, RAL 7035 light grey 7274435 Power strip, 6 REC., 15A/15A, USA, 120V, 6' cord, 19" rackmount, w/o on/off-switch, RAL 7035 light grey 7274001 Power strip, 6 REC., 15A/15A, USA, 120V, 15' cord, 19" rackmount, RAL 7032 pebble grey 7274002 Power strip, 6 REC., 15A/15A, USA, 120V, 6' cord w/ twist lock plug, 19" rackmount, RAL 7032 pebble grey 7274003 Power strip, 6 REC., 15A/15A, USA, 120V, 15' cord w/ twist lock plug, 19" rackmount, RAL 7032 pebble grey 7274004 Power strip, 6 REC., 15A/15A, USA, 120V, 6' cord, 19" rackmount, w/o on/off-switch, RAL 7032 pebble grey 7274021 Power strip, 6 REC., 15A/20A, USA, 120V, 6' cord w/ twist lock plug, 19" rackmount, RAL 7035 light grey 7274022 Power strip, 6 REC., 15A/20A, USA, 120V, 15' cord w/ twist lock plug, 19" rackmount, RAL 7035 light grey 7274023 Power strip, 6 REC., 15A/20A, USA, 120V, 6' cord, 19" rackmount, w/o on/off-switch, RAL 7035 light grey 7274221 Power strip, 6 REC., 20A/20A, USA, 120V, 15' cord, 19" rackmount, RAL 7035 light grey 7274222 Power strip, 6 REC., 20A//20A, USA, 120V, 6' cord w/ twist lock plug, 19" rackmount, RAL 7035 light grey 7274223 Power strip, 6 REC., 20A/20A, USA, 120V, 15' cord w/ twist lock plug, 19" rackmount, RAL 7035 light grey 7274224 Power strip, 6 REC., 20A/20A, USA, 120V, 6' cord, 19" rackmount, w/o on/off-switch, RAL 7035 light grey 7274301 Power strip, 6 REC., 15A/15A, USA, 120V, 15' cord, 19" rackmount, w/ surge protection, RAL 7035 light grey 7274302 Power strip, 6 REC., 15A/15A, USA, 120V, 6' cord w/ twist lock plug, 19" rackmount, w/ surge protection, RAL 7035 light grey 7274303 Power strip, 6 REC., 15A/15A, USA, 120V, 15' cord w/ twist lock plug, 19" rackmount, w/ surge protection, RAL 7035 light grey 7274304 Power strip, 6 REC., 15A/15A, USA, 120V, 6' cord, 19" rackmount, w/ surge protection, w/o on/off-switch, RAL 7035 light grey 7724001 Power strip, 8 REC., 15A/15A, USA, 120V, 15' cord, 2' frame mount, RAL 7044 silk grey 7724002 Power strip, 8 REC., 15A/15A, USA, 120V, 6' cord w/ twist lock plug, 2' frame mount, RAL 7044 silk grey 7724003 Power strip, 8 REC., 15A/15A, USA, 120V, 15' cord w/ twist lock plug, 2' frame mount, RAL 7044 silk grey 7724004 Power strip, 8 REC., 15A/15A, USA, 120V, 6' cord, 2' frame mount, w/o on/off-switch, RAL 7044 silk grey 7724211 Power strip, 8 REC., 15A/20A, USA, 120V, 15' cord w/ twist lock plug, 2' frame mount, RAL 7044 silk grey 7724212 Power strip, 8 REC., 15A/20A, USA, 120V, 6' cord, 2' frame mount, w/o on/off-switch, RAL 7044 silk grey 7724221 Power strip, 8 REC., 20A/20A, USA, 120V, 15' cord, 2' frame mount, RAL 7044 silk grey 7724222 Power strip, 8 REC., 20A/20A, USA, 120V, 6' cord w/ twist lock plug, 2' frame mount, RAL 7044 silk grey 7724223 Power strip, 8 REC., 20A/20A, USA, 120V, 15' cord w/ twist lock plug, 2' frame mount, RAL 7044 silk grey 7724224 Power strip, 8 REC., 20A/20A, USA, 120V, 6' cord, 2' frame mount, w/o on/off-switch, RAL 7044 silk grey 7724301 Power strip, 8 REC., 15A/15A, USA, 120V, 15' cord, 2' frame mount, w/ surge protection, RAL 7044 silk grey 7724302 Power strip, 8 REC., 15A/15A, USA, 120V, 6' cord w/ twist lock plug, 2' frame mount, w/ surge protection, RAL 7044 silk grey 7724303 Power strip, 8 REC., 15A/15A, USA, 120V, 15' cord w/ twist lock plug, 2' frame mount, w/ surge protection, RAL 7044 silk grey 7724304 Power strip, 8 REC., 15A/15A, USA, 120V, 6' cord, 2' frame mount, w/ surge protection, w/o on/off-switch, RAL 7044 silk grey 7748001 Power strip, 15 REC., 15A/15A, USA, 120V, 15' cord, 4' frame mount, RAL 7044 silk grey 7748002 Power strip, 15 REC., 15A/15A, USA, 120V, 6' cord w/ twist lock plug, 4' frame mount, RAL 7044 silk grey 7748003 Power strip, 15 REC., 15A/15A, USA, 120V, 15' cord w/ twist lock plug, 4' frame mount, RAL 7044 silk grey 7748004 Power strip, 15 REC., 15A/15A, USA, 120V, 6' cord, 4' frame mount, w/o on/off-switch, RAL 7044 silk grey 7748211 Power strip, 15 REC., 15A/20A, USA, 120V, 15' cord, 4' frame mount, RAL 7044 silk grey 7748212 Power strip, 15 REC., 15A/20A, USA, 120V, 15' cord w/ twist lock plug, 4' frame mount, RAL 7044 silk grey 7748213 Power strip, 15 REC., 15A/20A, USA, 120V, 6' cord, 4' frame mount, w/o on/off-switch, RAL 7044 silk grey 7748221 Power strip, 16 REC., 20A/20A, USA, 120V, 15' cord, 4' frame mount, RAL 7044 silk grey 7748222 Power strip, 16 REC., 20A/20A, USA, 120V, 6' cord w/ twist lock plug, 4' frame mount, RAL 7044 silk grey 7748223 Power strip, 16 REC., 20A/20A, USA, 120V, 15' cord w/ twist lock plug, 4' frame mount, RAL 7044 silk grey 7748224 Power strip, 16 REC., 20A/20A, USA, 120V, 6' cord, 4' frame mount, w/o on/off-switch, RAL 7044 silk grey 7748301 Power strip, 15 REC., 15A/15A, USA, 120V, 15' cord, 4' frame mount, w/ surge protection, RAL 7044 silk grey 7748302 Power strip, 15 REC., 15A/15A, USA, 120V, 6' cord w/ twist lock plug, 4' frame mount, w/ surge protection, RAL 7044 silk grey 7748303 Power strip, 15 REC., 15A/15A, USA, 120V, 15' cord w/ twist lock plug, 4' frame mount, RAL 7044 silk grey 7748304 Power strip, 15 REC., 15A/15A, USA, 120V, 6' cord, 4' frame mount, w/ surge protection, w/o on/off-switch, RAL 7044 silk grey 7772001 Power strip, 24 REC., 15A/15A, USA, 120V, 15' cord, 6' frame mount, RAL 7044 silk grey 7772002 Power strip, 24 REC., 15A/15A, USA, 120V, 6' cord w/ twist lock plug, 6' frame mount, RAL 7044 silk grey 7772003 Power strip, 24 REC., 15A/15A, USA, 120V, 15' cord w/ twist lock plug, 6' frame mount, RAL 7044 silk grey 7772004 Power strip, 24 REC., 15A/15A, USA, 120V, 6' cord, 6' frame mount, w/o on/off-switch, RAL 7044 silk grey 7772201 Power strip, 24 REC., 15A/20A, USA, 120V, 15' cord, 6' frame mount, RAL 7044 silk grey 7772202 Power strip, 24 REC., 15A/20A, USA, 120V, 6' cord w/ twist lock plug, 6' frame mount, RAL 7044 silk grey 7772203 Power strip, 24 REC., 15A/20A, USA, 120V, 15' cord w/ twist lock plug, 6' frame mount, RAL 7044 silk grey 7772204 Power strip, 24 REC., 15A/20A, USA, 120V, 6' cord, 6' frame mount, w/o on/off-switch, RAL 7044 silk grey 7772221 Power strip, 24 REC., 20A/20A, USA, 120V, 15' cord, 6' frame mount, RAL 7044 silk grey 7772222 Power strip, 24 REC., 20A/20A, USA, 120V, 6' cord w/ twist lock plug, 6' frame mount, RAL 7044 silk grey 7772223 Power strip, 24 REC., 20A/20A, USA, 120V, 15' cord w/ twist lock plug, 6' frame mount, RAL 7044 silk grey 99

Climate Control Basics The Need For Climate Control When the expense of electronic and electrical components and the costly implications of a system s down time are considered, it is important that all reasonable steps are taken to ensure that steady and reliable performance of a system continues. This should in almost all circumstances include climate control cooling and/or heating. The Purpose Of Cooling Electronic and electric equipment often generate a great deal of heat during operation. Frequently located in hostile environments, the equipment may also encounter the additional problem of not having safe, clean air available to dissipate unwanted heat. Such adverse conditions affect the performance and the life expectancy of electrical/ electronic system components. Three Basic Cooling Methods When selecting a cooling method there are three types to consider. (1) Passive Ventilation - If there is only a minimal heat gain in your circumstance and the ambient air is relatively cool and clean, then the use of louvers or grilles with filters can be effective. This method, however, usually provides less cooling effect than is necessary with today s components. The temperature rise within a sealed enclosure is seen in Figure 2. (2) Forced Convection Air Cooling - If the installation will be in a clean, non-hazardous environment with an acceptable ambient (outside the enclosure) temperature range, a simple forced-air cooling system utilizing outside air is usually adequate. Combined with an air filter, such devices generally meet the heat removal needs of typical electronic equipment and many electrical applications (Fig. 1). Examples of forced convection air cooling are filter fans, pagoda roof fans, fan trays, and blowers of various types. FIGURE 1 - Forced Covection Method Outlet louvers Ambient Air Fan or Blower Ambient Air with Heat Load Cabinets Pressurized System - pushes air through enclosure Filter Fan Airflow Pagoda Roof Fan Airflow Air Conditioner Airflow Fans And Blowers Can Be Used To Pressurize (Preferred) Or Exhaust Cabinet Air. The Ambient Air Should Be Filtered Before It Enters The Cabinet. (3) Closed-Loop Cooling - In harsh environments involving high temperatures, wash-down requirements, heavy particulate matter or the presence of chemicals capable of damaging components (NEMA 4 or 12 environments), ambient air must be kept out of the enclosure. Closed-loop cooling consists of two separate circulation systems. One system, sealed against the ambient air, cools and recirculates the clean cool air throughout the enclosure. The second system uses ambient air or water to remove and discharge the heat. Examples of closed-loop cooling equipment employed with electronics and process controls are heat exchangers and air conditioners. Blowers are used in higher static pressure applications (when internal equipment is densely packed), and are at maximum efficiency when operating near their peak static pressure. Advanced Thermal Modeling (4) Rittal also offers, on a fee basis, advanced thermal modeling using state-of-the-art CFD (computerized fluid dynamics) software. For additional information on improving your system reliability and cost through thermal analysis and testing, please contact Rittal. Technical Information TECHNICAL APPENDIX Rittal cooling devices are precisely designed to solve the problems of internal heat build-up above component tolerances, excessive ambient temperatures, moisture and contaminant laden atmospheres and corrosive environments, which can affect sensitive electronic equipment. A little time and effort spent early in the design process can save a great deal of trouble and expense later by preventing the need to retrofit with proper cooling devices in the field during a down time situation. Information Needed For Climate Control Selection The following information should be on hand to properly size cooling products. (1) Heat to be dissipated (Watts) by the electrical components inside the enclosure (2) Maximum temperature expected outside enclosure ( F) (3) Maximum allowable internal enclosure temperature ( F) (4) Enclosure dimensions For more information, contact the Rittal Technical Hotline 1-800-637-4425. 100

Technical Information TECHNICAL APPENDIX Climate Control Sizing Rittal offers four different methods to cool an enclosure, and one to warm an enclosure. To cool an enclosure, the following must be known: Size of the enclosure and exposed enclosure surface (A= m 2 ) = A Ambient temperature outside of the enclosure (Tu) Required temperature inside the enclosure (Ti) Difference = T Heat transfer coefficient (5.5 W/m 2 K sheet steel 3.5 W/m 2 K plastic) = k Heat loss (heat build up from the installed components installed) = Qv Solution of equation will give you required cooling capacity = Qe To calculate the exposed surface area of an enclosure, apply the following: (All values are metric) 1. Single enclosure, freestanding A = 1.8 x H x (W + D) + 1.4 x W x D 2. Single enclosure, against a wall A = 1.4 x W x (H + D) + 1.8 x D x H 3. First/last enclosure of a suite A = 1.4 x D x (H + W) + 1.8 x W x H 4. First/last against a wall A = 1.4 x H x (W + D) + 1.4 x W x D 5. Enclosure within a suite A = 1.8 x W x H + 1.4 x W x D + D x H 6. Enclosure within suite/wall A = 1.4 x W x (H + D) + D x H 7. Enclosure within suite/wall/roof A = 1.4 x W x H + 0.7 x W x D + D x H Example Of Air Conditioning Sizing: PS 4808 freestanding (2 x.8 x.8) 2000 x 800 x 800mm = 2 x.8 x.8m A = 1.8 x 2 x (1.6) + 1.4 x.8 x.8 (A= 6.6) Ambient = 95 F/35 C Required internal = 88 F/31 C Heat transfer coefficient = 5.5 Heat loss = 650 watts/2210 BTU Required cooling = A x T x k + Qv (heat loss) 6.6 x 4 x 5.5 + 650 = 795 watts/273 BTU Locate the air conditioner in the Rittal catalog that would best fit this application, confirm with performance diagram. Sizing An Air to Water Heat Exchanger: Qe = A x T x k + Qv Confirm with performance diagram, noting temperature of cooling water. Sizing An Air to Air Heat Exchanger: qw (required thermal capacity) = Qv - A x T x k T Sizing a Filter Fan: V (volume) = f x Qv T (f = altitude above sea level in meters) Sizing an Enclosure Heater: QH (Required heat) = A x T x k Other Factors To Consider Include: NEMA requirements Voltage available Harshness of environment (corrosive gases) Maintenance intervals Space available on enclosure For more information, contact the Rittal Technical Hotline 1-800-637-4425. 101