TEST & INSPECTION. Featured Data Center Products. OTDRs Certification Test Kits Inspection Cleaning

TEST & INSPECTION Featured Data Center Products

M310 Enterprise OTDR with TruEvent Technology Designed for Enterprise Network Testing, Troubleshooting and Documentation, the M310 with TruEvent technology provides a new level of event detection accuracy and reliability in field test equipment. Taking full advantage of the unit s short dead zone and adding improved event accuracy, this is the best performing OTDR for enterprise and data center applications. With the push of a single button, users can be confident of obtaining accurate locations and measurements of all events, without the confusing introduction of false events. FEATURES Industry leading TruEvent analysis Short dead zones provide precise testing of closely spaced events Front Panel and First Connector Check Live fiber detection APPLICATIONS Enterprise network Data Center LAN/WAN Campus and military fiber networks and more SPECIFICATIONS WAVELENGTHS (nm) OTDR PERFORMANCE DYNAMIC RANGE (db) DEAD ZONE EDZ/ADZ (m) INTEGRATED CAPABILITY LINK- MAP OLS OPM VFL INSPEC- TION AFL NO. 1310/1550 38/37 0.8/3.5 DFS1 M310-20 850/1300/1310/1550 30/30/38/37 0.8/2.5 DFS1 M310-25 Available in kits. For details, see M310 product profile at www.aflglobal.com/test.

M710 Large Display OTDR with TruEvent Technology The M710 OTDR combines ease of use (Touch and Test ) and high performance in a rugged, large display (6.5 inches), hand-held package. With single mode dynamic ranges up to 44 db and MM/SM QUAD option, the M710 OTDR is ideal for testing and troubleshooting LAN/WAN, metro and long haul networks. The M710 OTDR utilizes AFL s industry leading TruEvent technology to provide a new level of accuracy and reliability in event analysis. FEATURES TruEvent event analysis technology Inspection capable with DFS1 Digital FiberScope Automatic Pass/Fail analysis Live fiber detection APPLICATIONS Tier 1 and Tier 2 testing and certification Test and certify campus & central office networks and Distributed Antenna Systems (DAS) fiber infrastructure Reporting with TRM 2.0 PC software (Basic License) Detect fault location and splice verification SPECIFICATIONS M710 QUAD OTDR WAVELENGTHS (nm) OTDR PERFORMANCE DYNAMIC RANGE (db) DEAD ZONE EDZ/ADZ (m) INTEGRATED LINK- MAP OPM VFL INSPECTION AFL NO. 1310/1550 41/39 0.8/4.0 DFS1 M710-20 1310/1550/1625 41/39/39 0.8/4.0 DFS1 M710-21 1310/1550 44/42 0.8/4.5 DFS1 M710-40 850/1300/1310/1550 24/24/39/37 0.8/4.5 DFS1 M710-24 For details, see M710 product profile at www.aflglobal.com/test. M710 OTDR with DFS1 FiberScope

Certification Products The C840 QUAD Certification Tester includes an integrated single-mode (Laser 1310/1550 nm) and multimode (LED 850/1300 nm) Optical Light Sources (OLS), Optical Power Meter (OPM), and Visual Fault Locator (VFL, 650 nm). The C840 may be paired with another C840 for Certification testing or used alone as a traditional power meter, light source or visual fault locator. C880 QUAD Certification (Tier 1) Test Kit includes two (2) hand-held C840 QUAD Certification Testers. All C series products include USB Flash drive, TRM 2.0 Test Results Manager trace analysis/reporting and certification or OPM loss reporting PC software (Basic License), AC adapters, switchable test port adapters, and accessories.. C880 QUAD Certification Test Kit FEATURES Touch and Test intuitive user interface Automatic Pass/Fail analysis (TIA/ISO/EN) Wave ID detect if used with Wave ID light sources TRM 2.0 PC software (Basic License) Inspection capable with the DFS1 Digital FiberScope ORDERING C880 KITS INCLUDED ACCESSORIES One-Click Cleaner (2.5 mm) One-Click Cleaners (2.5 mm, 1.25 mm), (4) SC/LC test cords One-Click Cleaner (2.5 mm), (4) SC/ST test cords APPLICATIONS Tier 1 and Tier 2 testing and certification of premise networks Bi-directionally measure loss and length of fiber links Perform Pass/Fail Event and Link measurements Certify fibers using Pass/Fail criteria Create professional certification reports C840-100-LP1-S1 C880-100-LP1-S1 C880-100-LP1-S2

AFL offers a full range of optical power meters to support FTTx deployments, fiber network testing and certification, and basic power measurements. Backed by industry leading 5-year product warranties, these are the quality products you can trust. SPECIFICATIONS Optical Power Meters OPM5 Optical Power Meter CALIBRATED WAVELENGTHS (nm) DETECTOR TYPE MEASUREMENT RANGE (dbm) WAVE ID TONE a REF. SET DATA SAVE PC S/W AFL NO. 850, 980, 1300, 1310, 1490, 1550, 1625 InGaAs +26 to -50 OPM5-4D 850, 1300, 1310, 1490, 1550, 1625 InGaAs +10 to -75 OPM5-3D 850, 1300, 1310, 1490, 1550 Germanium +6 to -60 OPM5-2D 850, 980, 1300, 1310, 1490, 1550, 1625 InGaAs +26 to -50 OPM4-4D 850, 1300, 1310, 1490, 1550, 1625 InGaAs +10 to -75 OPM4-3D 850, 1300, 1310, 1490, 1550 Germanium +6 to -60 OPM4-2D 650, 660, 780, 850 Silicon +6 to -70 OPM4-1D 1490, 1550 Filtered InGaAs +10 to -50 @1490 +20 to -50 @1550 OPM4-FTTx b 850, 980, 1310, 1490, 1550, 1625 InGaAs +26 to -50 CSM1-4 850, 1300, 1310, 1490, 1550, 1625 InGaAs +6 to -70 CSM1-3 850, 1300, 1310, 1550 Germanium +6 to -60 CSM1-2 660, 780, 850 Silicon +6 to -70 CSM1-1 a. 270 Hz, 330 Hz, 1 khz, and 2 khz Tone detection b. FTTx PON Power Meter with integrated VFL. BPON, GPON, EPON compatible.

LED and Laser Light Sources AFL offers a full range of light sources for testing single-mode and/or multimode fiber networks. Sources with Wave ID transmit two or more wavelengths simultaneously decreasing test time and reducing user errors when used with AFL Wave ID power meters. Encircled Flux (EF) Compliant Light Sources Standard multimode light source used with AFL Encircled Flux Mode Controller (ordered separately) Order EF mode conditioner with part number 8700-06-000#MR to select different connector type. SPECIFICATIONS WAVELENGTHS (nm) OUTPUT PORTS EMITTER TYPE OUTPUT POWER STABILITY WAVE ID TONE OUTPUT AFL NO. 1310, 1490, 1625 (1): SM Laser -5 dbm ± 0.05 db/1 hr 270, 330 Hz, 1, 2 khz OLS7-FTTx 1310, 1490, 1550 (1): SM Laser -5 dbm ± 0.05 db/1 hr 270, 330 Hz, 1, 2 khz OLS7-FTTH 1310, 1550, 1625 (1): SM Laser -5 dbm ± 0.05 db/1 hr 270, 330 Hz, 1, 2 khz OLS7-3 850, 1300 1310, 1550 (1): MM (1): SM LED Laser -20 dbm 0 dbm ± 0.05 db/1 hr N/A 2 khz 1310, 1550 (1): SM Laser 0 dbm ± 0.05 db/1 hr 270, 330 Hz, 1, 2 khz OLS2-DUAL 850, 1300 (1): MM LED -20 dbm ± 0.1 db/8 hrs N/A OLS1-DUAL 1310, 1550 (1): SM Laser 0 dbm ± 0.05 db/1 hr 270, 330 Hz, 1, 2 khz CSS1-SM 850, 1300 (1): MM LED -20 dbm ± 0.1 db/1 hr N/A CSS1-MM OLS4 OLS4 Integrated LED/Laser Source

AFL offers a variety of light sources and power meters combined into multimode (MLP), single-mode (SLP), and single-mode/multimode (SMLP) test kits. Sources with Wave ID transmit two or more wavelengths simultaneously decreasing test time and reducing user errors when used with Wave ID power meter. Advanced kits add functionality including in-unit storage of test results and TRM 2.0 reporting software, which enables technicians to organize test data, apply test rules for pass/fail analysis and build custom test reports using industry accepted templates. SPECIFICATIONS Optical Loss Test Kits SMLP5-5 Optical Loss Test Kit FIBER TYPE DYNAMIC RANGE (db) @λ (nm) SET REF. DATA SAVE WAVE ID PC S/W METER SOURCE AFL NO. MM 40 @850 OPM4-1D OLS1-1C MLP4-1D MM, SM 40 @850/1300, 22 @1300 OPM4-2D OLS1-DUAL MLP4-2D MM, SM 40 @850/1300, 22 @1300 OPM5-2D OLS1-DUAL MLP5-2D SM 70 @1310/1550 OPM4-3D OLS2-DUAL SLP4-6 SM 50 @1310/1550 OPM4-4D OLS2-DUAL SLP4-6D SM 45 @1310/1550/1625 OPM4-4D OLS7-3 SLP4-7 SM 45 @1310/1490/1550 OPM4-4D OLS7-FTTH SLP4-FTTH SM 70 @1310/1490/1625 OPM4-3D OLS7-FTTx SLP4-FTTx SM 70 @1310/1550 OPM5-3D OLS2-DUAL SLP5-6 SM 50 @1310/1550 OPM5-4D OLS2-DUAL SLP5-6D SM 45 @1310/1550/1625 OPM5-4D OLS7-3 SLP5-7 SM 45 1310/1490/1550 OPM5-4D OLS7-FTTH SLP5-FTTH SM 70 @1310/1490/1625 OPM5-3D OLS7-FTTx SLP5-FTTx MM, SM 40 @850/1300, 60 @1310/1550 OPM4-2D OLS4 SMLP4-4 MM, SM 40 @850/1300, 60 @1310/1550 OPM5-2D OLS4 SMLP5-5

Encircled Flux (EF) Compliant Test Kits Since adoption by the IEC, Encircled Flux (EF) multimode launch requirements are increasingly specified into fiber loss testing job requirements. Meeting EF specification requires technicians use EF qualified sources and test sets. It is important to note IEC 61280-1-4 and TIA-568-14-B Ed. 2.0 specify EF multimode launch conditions at the end of an EF qualified Reference Grade Test Cord (RGTC), not directly out source test port. Thus, EF compliance requires an EF Light Source and RGTC used together. AFL EF compliant sources and loss test kits include: LOSS TEST KITS (a, b) FIBER TYPE DYNAMIC RANGE (db) @λ (nm) AVAILABLE CONNECTORS SOURCE PORT TEST CORD INCLUDED 2-METER TEST CORDS LAUNCH (µm) RECEIVE (µm) POWER METER LIGHT SOURCE AFL NO. MM SM 40 @850/1300 60 @1310/1550 FC, SC FC, SC, ST, LC MM: RGTC, 50/125 SM: 9/125 MM: 50/125 SM: 9/125 OPM5-2D OLS4-EF SMLP5-5-EF MM SM 40 @850/1300 60 @1310/1550 FC, SC FC, SC, ST, LC MM: RGTC, 50/125 SM: 9/125 MM: 50/125 SM: 9/125 OPM4-2D OLS4-EF SMLP4-4-EF SMLP5-5-EF test Kit MM 40 @850/1300 22 @1300 FC, SC FC, SC, ST, LC MM: RGTC, 50/125 MM 50/125 OPM5-2D OLS1-DL-EF MLP5-2-EF MM 40 @850/1300 22 @1300 FC, SC FC, SC, ST, LC MM: RGTC, 50/125 MM 50/125 OPM4-2D OLS1-DL-EF MLP4-2-EF SOURCES (a, b) WAVELENGTHS (nm) OUTPUT PORTS EMITTER TYPE OUTPUT POWER (dbm) STABILITY AFL NO. 850, 1300, 1310, 1550 MM, SM LED, Laser -20 (MM port), 0 (SM port) ± 0.05 db/1 hr OLS4-EF 850, 1300 MM LED -20 ± 0.1 db/8 hrs OLS1-DUAL-EF a. Light Source with designed in Encircled Flux (EF) optics paired with one EF qualified RGTC b. 50/125 µm receive test cord. Light Source with two 9/125 µm test cords (launch/receive)

Visual Fault Identifiers Visual Fault Identifiers (VFI) use powerful red lasers to trace and troubleshoot single-mode or multimode optical fiber links. VFI is an ideal tool for locating a large number of defects that occur at connection points in and around fiber cabinets which are hidden in an OTDR s blind-spot or dead-zone. AFL offers VFI units for both single-ferrule and multi-ferrule connector styles. MT TRACER Essential tool for ribbon cable testing Multi-fiber VFI with 12 separately controlled lasers Verify connectivity of a 12-fiber ribbon cable Confirm polarity in seconds. HiLite and VFI2 SERIES Identify fiber faults inside OTDR dead zone Identify sharp bends or breaks in fibers Identify poorly mated connectors Verify AFL FAST Connector Installation SPECIFICATIONS MT Tracer PRODUCT WAVELENGTH OUTPUT POWER EMITTER CONNECTOR POWER MT Tracer 650 nm 1 mw, 2 Hz or CW Laser MTP 2 AA (40 hours) HiLite 650 nm 1 mw, 2 Hz Laser 2.5 mm Universal 1 x AAA (16 hours) VFI2 650 nm 1 mw, 2 Hz or CW Laser 2.5 mm Universal 2 x AA (60 hours) ORDERING HiLite and VFI PRODUCT DESCRIPTION AFL NO. MT Tracer MT Tracer Kit: MT Tracer Source, MT Tracer Display, and carry case TRCR-90-0900 HiLite HiLite visual fault identifier with 2.5 mm adapter VFI3-00-0900PR HiLite HiLite visual fault identifier with 2.5 mm and 1.25 mm adapters VFI3-01-0900PR VFI2 VFI2 visual fault identifier with 2.5 mm adapter VFI2-00-0900PR VFI2 VFI2 visual fault identifier with 2.5 mm and 1.25 mm adapters VFI2-01-0900PR

Optical Fiber Identifiers OFI-200 - Optical Fiber Identifier: Detects optical signals sent through single-mode fiber without disrupting traffic, differentiates traffic from 2 khz tones, indicates traffic direction. OFI-400 - Enhanced OFI: Adds LCD display of power. Designed for use with a wide range of single-mode fibers including 250 μm (bare) coated, 900 µm buffered and ribbon fibers or 2 mm and 3 mm jacketed fibers. OFI-400C - Optimized for Jacketed Fiber: Functionally equivalent to the OFI-400 but designed specifically for use with 2 mm or 3 mm jacketed single-mode fibers. OFI-400HP - High Power Applications: Designed for use where high levels of optical power are present. When display reaches +23 dbm (200 mw) or greater, the OFI-400HP displays High warning indication. OFI-200 and OFI-400x Models FIBER COATING TYPE INSERTION LOSS (db) TONE (Hz) POWER AFL NO. @1310 (nm) @1550 (nm) 250 & 900 µm, ribbon, 2 & 3 mm jacketed 0.6 2.5 2 khz 9V OFI-200D 2 & 3 mm jacketed 1.0 2.8 270, 330 Hz; 1, 2 khz (2) AAA OFI-400C 250 & 900 µm, ribbon, 2 or 3 mm jacketed 0.6 2.5 270, 330 Hz; 1, 2 khz (2) AAA OFI-400 2 & 3 mm jacketed 0.2-0.5 0.8-1.3 270, 330 Hz; 1, 2 khz (2) AAA OFI-400HP OFI-BI and OFI-BIPM: Full featured OFI includes a touch screen, positive stop trigger and several easy to select options. This OFI can be used with any SM fiber including bend insensitive fiber, bare fibers, ribbons and up to 3 mm jackets and most MM fibers. The BIPM model adds an integrated optical power meter. OFI-BI and OFI-BIPM FIBER COATING TYPE DETECTABLE SIGNALS POWER METER POWER AFL NO. 0.25 mm SM and SM ribbon fiber (up to 12 ribbon) 1.1 /1.5 /1.7 /2.0 /3.0 mm SM jacketed fiber 0.25 mm SM and SM ribbon fiber (up to 12 ribbon) 1.1 /1.5 /1.7 /2.0 /3.0 mm SM jacketed fiber CW, Traffic,270 Hz/1 khz/2 khz (2) AA OFI-BI CW, Traffic,270 Hz/1 khz/2 khz (2) AA OFI-BIPM

FOCIS WiFi PRO Fiber Optic Connector Inspection Systems The FOCIS WiFi PRO system combines AFL s powerful fiber connector inspection and analysis with the familiar ease of a smart device. FOCIS WiFi PRO works the way you do connected to your phone or tablet. FOCIS WiFi PRO enables mobile workers to complete remote fiber optic connector inspection tasks while remaining connected to coworkers and managers. The AFL FOCIS application software enables users to view live images on their smart devices, save, recall and share saved end-face images via e-mail, text of mobile cloud applications like Dropbox and Google Drive. FEATURES Automatically analyze connector integrity and save, recall and share results via email or cloud applications IEC 61300-3-35, AT&T TP-76461 and user-defined pass/fail criteria Full pass/fail analysis in less than 1 second Compatible with iphone and ipad (ios7) Compatible with Android 2.3.3 and up APPLICATIONS Enterprise and Campus Networks Data Center patch panels, trunks, patch cords and equipment terminations Long-haul, Metro Core and Access Links Broadband and CATV Networks Access network cabinets and drops ORDERING MODEL AND DESCRIPTION FOCIS WiFi PRO UPC Kit with adapter tips and cleaners FOCIS WiFi PRO APC Kit with adapter tips and cleaners FOCIS WiFi PRO MPO Kit with adapter tips and cleaners FOCIS WiFi PRO Data Center Kit with adapter tips and cleaners AFL NO. FMPR-00-04XU FMPR-00-04XA FMPR-00-04XM FMPR-00-04XD

Fiber Optic Cleaning Solutions AFL fiber optic cleaning products provide network technicians and other staff to safely and effectively clean fiber optic connectors, dramatically decreasing network outage and downtime. For details, see our Fiber Optic Cleaning and Inspection catalog or visit www.aflglobal.com. One-Click Cleaner MPO - Designed to clean MPO and MTP multi-fiber connectors used in Data Centers and other high density optical networks, the new One-Click Cleaner MPO is a revolutionary push-type cleaner, which simplifies cleaning of the ferrule end-face of both MPO/MTP exposed connectors and connectors in adapters. One-Click Cleaner D-LC (Duplex LC) - Reduce cleaning time with the new One-Click Cleaner D-LC. Offering the same performance and easy-to-use one-click technology as the original, the One-Click Cleaner D-LC cuts cleaning time in half by effectively cleaning both LC connectors of a duplex LC at one time. 500+ duplex LC cleans per cleaner (1000+ LC connector cleans). One-Click Cleaner MPO One-Click Cleaner D-LC (Duplex LC) DESCRIPTION One-Click Cleaner MPO (500 cleans) One-Click Cleaner D-LC, Duplex LC (500+ cleans X2) One-Click Cleaner SC, ST, FC (500+ cleans) One-Click Cleaner LC/MU (500+ cleans) One-Click Mini-100 SC, ST, FC (100+ cleans) One-Click Mini-100 LC/MU (100+ cleans) One-Click Cleaner Mini-500 SC, ST, FC (500 cleans) One-Click Cleaner Mini-500 LC/MU (500 cleans) One-Click Cleaner Ultra 2.5 SC, ST, FC (enlarged cleaning) AFL NO. 8500-05-0030MZ 8500-05-0008MZ 8500-05-0001MZ 8500-05-0002MZ 8500-05-0005MZ 8500-05-0006MZ 8500-05-0009MZ 8500-05-0010MZ 8500-05-0007MZ

Accessories AFl offers an extensive array of fiber optic test and inspection accessories, cleaning supplies, and test reporting software. OTDR launch and receive/tail cords - Fiber Rings Custom-designed Network Simulators Encircled Flux (EF) Modal Conditioners Encircled Flux (EF) Reference Grade Test Cords Mandrels for Multimode Link Testing TRM 2.0 Test Results Manager PC software Connector adapters for fiber optic testers Adapter tips for inspection products Multimode Test Jumpers (62.5/125 µm - 2 meters) Single-mode Test Jumpers (9/125 µm - 2 meters) Mating Adapters (Bulkheads) Bare Fiber Test Accessories Power Supplies and Cords And much more at www.aflglobal.com/test Calibration Services Servicing your valuable AFL Test & Inspection equipment at authorized AFL calibration facilities ensures you are getting the most out of your equipment and it is performing accurately. Many test standards require annual calibration. Authorized AFL calibration facilities are ISO 9001 certified, traceable to the National Institute of Standards and Technology, and in compliance with ANSI/NCSL Z540-1, ISO 10012-1. AFL has an authorized calibration/repair facility for AFL products in the USA, Europe and Asia Pacific. USA AFL Test & Inspection Division 16 Eastgate Park Road Belmont, NH 03220 603-528-7780 800-321-5298 Europe Fujikura Europe Ltd C51 Barwell Business Park Leatherhead Road Chessington, Surrey, KT9 2NY +44 (0) 208 240 2020 Asia Fujikura Asia Ltd 438A Alexandra Road, #08-03 Blk A, Alexandra TechnoPark- Singapore 119967 calibration.fal@sg.fujikura.com +65 62711312

For more information about AFL's OTDRs, Certification Test Kits, Loss Test Sets, Inspection Systems, Cleaning Solutions and Accessories contact us at (800) 321-5298, (603) 528-7780 or online at www.aflglobal.com/test M310 QUAD CERTIFICATION KIT M710 OTDR HARD CASE KIT FIBER RINGS - OTDR LAUNCH & RECEIVE CORDS CLEANING TEST KITS