Course Resource Guide Training Services Defense Industries Training Products : http://oshkoshcorp.com/training/ Defense Products : http://www.oshkoshdefense.com/
Table of Contents Training Experience and Capabilities Product Training Center (PTC) Training Operations Maintenance Defense Courses Defense Table of Contents Army Navy / Marines Air Force and Army Municipal Specialized Courses Online Registration Information Contact/Website Information Pages 3-7 Pages 8-10 Pages 11-12 Page 11 Page 12 Pages 13-54 Pages 13-15 Pages 17-32 Pages 33-39 Pages 44-49 Pages 50-54 Page 55 Page 56 2
Training Experience & Capabilities provides a full array of maintenance and operational training for each of the vehicles it manufactures. We have a dedicated customer training center located near our corporate headquarters in Oshkosh, Wisconsin. In addition, we provide mobile training teams who conduct training at customer locations around the globe. We have developed, fielded and implemented training packages & training materials which have trained over 12,500 military personnel at locations around the world over the last 5 years. Training Conducted Globally To help maximize impact and minimize the time needed for operator and maintainer training needed for our vehicles; has developed a blended approach to the training environment. This approach encompasses the typical classroom and shop experiences with virtual task trainers, distance learning and a stepped systems methodology to training today s war fighter. This prepares them for advanced troubleshooting experiences they will encounter while training, using simulators, 3D models, and practical shop exercises working on live military vehicles. 3
Training Experience & Capabilities Professional Instruction for a Demanding Work Environment: Oshkosh Product Training provides instructors, instructions, and all related technical literature in support of the training for Government Personnel, Service Contractors, and Commercial Technicians. We accomplish this through the development of comprehensive professional technical training packages for military and commercial vehicles which includes instruction on operation/operator maintenance (OP) and field level maintenance (FLM), repair and troubleshooting of the system and subsystems: preventive and corrective maintenance procedures; external diagnostics and other tests as well as any custom courses per your needs. Our instructors are factory trained to know every system, anticipate every question, and get the operators and technicians ready for the demanding world of operating & maintaining heavy equipment in the demanding environments required by construction, military, airport fire and rescue, refuse and snow removal industries. 4
Training Experience & Capabilities The Modular Approach: The Product Training Center (PTC) takes a modular approach to training development. Complete modules are developed for each major system of a vehicle. As new products or vehicles are brought online, training modules that are carry over s from the previous model or system, need not be developed.saving the customer money and speeding the process to a final deliverable. This also aides in flexibility to create custom classes which the PTC is able to develop and Instruct at the customer s request. A sample of the modules already assembled and being taught to customers worldwide. Caterpillar C12, C13, C15, C16, C18. Detroit DDEC II, III, IV and V Allison CEC, ATEC, WTEC, and GEN IV Eaton CTIS Marmon-Herrington Transfer Cases Rockwell Axles Bendix ABS Command Zone Electronic System Troubleshooting J1939 CAN Bus Troubleshooting 5
Training Experience & Capabilities Centuries of Experience: Our seasoned managers and instructors have over 250 years of combined experience developing, managing, and implementing training packages. Our years of experience training, has taught us to develop the perfect blend of classroom, hands-on and distance learning training activities. Specialized Hands-On Training Equipment : Development of training aids is an integral part of our success in fulfilling our customer s requirements for thorough training. This is a normal part of our process, and we are adept at developing cut-away components, live vehicle fault inducement kits, classroom pass around components, simulators, and live vehicle exercises for our training packages. 6
Training Experience & Capabilities Interactive Multimedia Instruction Packages: Our staff of professional developers has extensive experience in the design and implementation of Interactive Multimedia Instruction Packages for our customers. These packages act as stand alone or support packages to our customers who realize that training is a multifaceted complex task oriented process. This training is a web based, self-paced and/or Virtual Task Trainer type instruction package. 7
Training Facilities Dynamic Learning Environment Location: Located at 3740 Fisk Ave., Oshkosh, WI 54904 on large plots of land with ample space for vehicle operation Secure storage for vehicles and parts Available transportation to and from hotels Close to other & Pierce facilities with lant tours available for many of our students Onsite Vehicle Operation & Inspection: Safely operate the vehicle onsite Safely perform inspections and use vehicle features Secure storage allows for quick & easy access Practical applications reinforces key concepts and allows for effective transfer of knowledge from theory to practice 8
Training Facilities Dynamic Learning Environment Classrooms: Multiple classrooms Equipped with instructor computer Projection system to view multi-media presentations Extensive white boards Optimal table layout for group collaboration as well as individual learning Ample space provides for the use of training aids Student computers provided for schematics and multi-media training 9
Training Facilities Dynamic Learning Environment Vehicle Labs: Multiple vehicle bays serve as learning labs Large space accommodates several vehicles/students and classes at one time Includes tools for vehicle maintenance & diagnostics as well as specialty kit installations Provides a hands-on educational experience within a shop setting Creates an opportunity to learn from practical applications and applied faults 10
Operator Training: Vehicle operator training provides the students with a thorough understanding of the systems and their purpose on each variant. This may include crane, Snozzle, dry chemical, Snow Removal, tractor/ trailer, towing/recovery and other operations. These courses are constructed to provide up to 90% hands on time with the equipment in real life operational exercises. Courses typically start off at a vehicle familiarization level and advance so that by the end of the course, the students know how to drive and use the equipment in a variety of situations safely. Student ratios are maintained to a maximum of 6:1 for safety and to allow the students to get focused attention which enhances training retention. Operational classes are usually scheduled at the unit s location so the students learn to use their own equipment and terrain characteristics. Course lengths vary depending on the complexity of the equipment from 1 to 5 days. 11
Maintenance Training: Vehicle maintenance training provides the students with an expert understanding of the systems used on each variant. These courses are constructed to provide up to 60% hands on time with the equipment in real life troubleshooting and repair exercises. Courses typically start off at a vehicle familiarization level and advance so that by the end of the course, the students know how to use the equipment, and how to quickly troubleshoot / repair the vehicles in a safe manner, without damaging the equipment or other personnel. Student ratios are maintained to a maximum of 12:1 for safety and to allow the students to get focused attention which enhances training retention. Emphasis is placed on drive train, electrical, hydraulic, air system troubleshooting. Maintenance classes are conducted on a regular basis in Oshkosh, WI or can be conducted at the unit s location so the students learn to repair their own equipment. Course lengths vary in length depending on the complexity of the equipment from 5 to 10-days. 12
Table of Contents Defense Training Table of Contents: Army HEMTT A2/A4 Operation Cargo Tractor Tanker LHS w/ PLST Wrecker CBT THADD TFFT 17-20 17 17 18 18 19 19 20 20 HET Operation Base HET w/ M1000 Trailer Base HET w/ Fontaine Trailer HETA1 w/ M1000 Trailer HET Maintenance Base HET w/ M1000 Trailer Base HET w/ Fontaine Trailer HETA1 w/ M1000 Trailer 27-28 27 27 28 28-29 28 29 29 HEMTT A2/A4 Maintenance Cargo Tractor Tanker LHS w/ PLST Wrecker CBT THADD TFFT 21-24 21 21 22 22 23 23 24 24 FMTV All Variant Operation Maintenance Advanced Hyd. And Elect. M-ATV(MRAP) Operation Maintenance Advanced Electrical 30-31 30 30 31 31-32 31 32 32 PLS Operation PLS Base w/ PLST PLSA1 w/ PLST 25 25 25 PLS Maintenance PLS Base w/ PLST PLSA1 w/ PLST 26 26 26 Private and custom classes are also available for your group in Oshkosh or at your location. Please contact at 920-233- 9331 for more information. All listed prices within this guide are subject to change. 13
Table of Contents Navy Marines MTVR Operations MTVR Cargo MTVR Tractor MTVR Wrecker MTVR Maintenance MTVR Cargo MTVR Tractor MTVR Wrecker MTVR Adv. Electrical & Hydraulics MTVR Variant Conversion LVSR Operations LVSR Cargo LVSR Maintenance LVSR Cargo M-ATV (MRAP) Operation Maintenance Advanced Electrical Defense Training Table of Contents: 33-34 33 33 34 34-36 34 35 35 36 36 37 37 37 37 38-39 38 38 39 Air Force & Army Municipal ARFF T-series Operation T-series Maintenance Striker Operation Striker Maintenance Striker Advanced Electrical T Series & Striker Wheel End Rebuild Snow Removal Operation P-series MPT-series H-series Pre-2007 H-series Post 2007 Snow Removal Maint. P-series MPT-series H-series Pre-2007 H-series Post 2007 H-series Adv. Elec. Command Zone Diagnostics M-ATV (MRAP) Operation Maintenance Advanced Electrical 40-42 40 40 41 41 42 42 43-44 43 43 44 44 45-47 45 45 46 46 47 47 48-49 48 48 49 Private and custom classes are also available for your group in Oshkosh or at your location. Please contact Product Training Solutions (PTC)at 920-233- 9331 for more information. All listed prices within this guide are subject to change. 14
Table of Contents Defense Training Table of Contents: Defense Specialized Courses Air Conditioning Maintenance Air Conditioning Certification HEMTT & PLS Crane Maintenance and Load Testing Military Advanced Electronics & Hydraulics 50 50 51 51 Caterpillar C15 Injector Removal / Replacement, Valve Adjustment, & Electronics Troubleshooting 55000 Series Transfer Case Rebuild 54 54 HEMTT wheel End & Axle rebuild HET Wheel End & Axle Rebuild PLS Wheel End & TAK 4 Rebuild MTVR / LVSR Wheel End & TAK 4 Rebuild 52 52 53 53 Private and custom classes are also available for your group in Oshkosh or at your location. Please contact at 920-233- 9331 for more information. All listed prices within this guide are subject to change. 15
Defense Training: All classes begin at 8 a.m. and finish around 4 p.m. each Class tuition prices are for classes held at the Product Training Center (PTC) in Oshkosh, Wisconsin, unless otherwise noted. Tuition does not include cost of student transportation, meals, or translation. For units or companies with more than six students, please contact the Training Center for private class pricing. For classes held in Oshkosh, we will black out hotel rooms for you at our corporate rate. You'll receive final confirmation details 30 days prior to the start of training. In addition to a student guide and vehicle system schematics, all students will receive a CDR/DVD with vendor and vehicle resources, class materials and references. Private and custom classes are also available for your group in Oshkosh or at your location. Please contact the Training Center at 920-233-9331 for more information and pricing. Experience the Oshkosh Difference for yourself. It all begins when you contact your nearest FSR or us directly. 16
Army HEMTT A2 and A4 Operations: HEMTT A2 and A4 Cargo (M977/985 A2/A4) Operations The HEMTT A2/A4 Cargo (M977/985 A2/A4) course will familiarize the students with the HEMTT M977/985 A2/A4 capabilities and operations. Students will be able to operate / drive the HEMTT M977/985 A2/A4 in a safe manner and utilize applicable model specific components. Instruction of operations and tasks will be conducted through classroom lecture, live demonstrations, and practical exercises. The Operator course will also provide the driver/operator of a HEMTT M977/985 A2/A4 sufficient information and skills to minimize the risk of a rollover/accident which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced HEMTT M977/985 A2/A4 Operators / drivers. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 5-day operational class - $1000 per student HEMTT A2 and A4 Tractor (M983A2/A4) Operations The HEMTT A2 and A4 Tractor (M983 A2/A4) course will familiarize the students with the HEMTT M983 A2 /A4 capabilities and operations. Students will be able to operate/drive the HEMTT M983 A2/A4 in a safe manner and utilize applicable model specific components. Instruction of operations and tasks will be conducted through classroom lecture, live demonstrations, and practical exercises. The Operator course will also provide the driver/operator of a HEMTT M983 A2/A4 sufficient information and skills to minimize the risk of a rollover/accident which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced HEMTT M983 A2/A4 Operators/drivers. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 5-day operational class - $1000 per student 17
Army HEMTT A2 and A4 Operations: HEMTT A2 and A4 Tanker (M978 A2/A4) Operations The HEMTT A2 and A4 Tanker (M978 A2/A4) course will familiarize the students with the HEMTT M978 A2/A4 capabilities and operations. Students will be able to operate/drive the HEMTT M978A4 in a safe manner and utilize applicable model specific components. Instruction of operations and tasks will be conducted through classroom lecture, live demonstrations, practical exercises and with the new Virtual Task Trainer multimedia system. The Operator course will also provide the driver / operator of a HEMTT M978 A2/A4 sufficient information and skills to minimize the risk of a rollover/accident which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced HEMTT M978 A2/A4 Operators/drivers. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 5-day operational class - $1000 per student HEMTT A2 and A4 LHS W/PLST (M1120 A2/A4) Operations The HEMTT A2/A4 LHS (M1120 A2/A4) course will familiarize the students with the HEMTT M1120 A2/A4 capabilities and operations. Students will be able to operate/drive the HEMTT M1120 A2/A4 in a safe manner and utilize applicable model specific components. Instruction of operations and tasks will be conducted through classroom lecture, live demonstrations, and practical exercises. The Operator course will also provide the driver/operator of a HEMTT M1120 A2/A4 sufficient information and skills to minimize the risk of a rollover/accident which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced HEMTT M1120 A2/A4 Operators/drivers. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 5-day operational class - $1000 per student 18
Army HEMTT A2 and A4 Operations: HEMTT A2 and A4 Wrecker (M984 A2/A4) Operations The HEMTT A2 and A4 Tractor (M984 A2/A4) course will familiarize the students with the HEMTT M984 A2/A4 capabilities and operations. Students will be able to operate/drive the HEMTT M984 A2/A4 in a safe manner and utilize applicable model specific components. Instruction of operations and tasks will be conducted through classroom lecture, live demonstrations, and practical exercises. The Operator course will also provide the driver/operator of a HEMTT M984 A2/A4 sufficient information and skills to minimize the risk of a rollover/accident which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced HEMTT M984 A2/A4 Operators/drivers. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 5-day operational class - $1000 per student HEMTT A2 CBT (M1977 A2) Operations The HEMTT A2 CBT (M1977 A2) course will familiarize the students with the HEMTT M1977 A2 capabilities and operations. Students will be able to operate/drive the HEMTT M1977 A2 in a safe manner and utilize applicable model specific components. Instruction of operations and tasks will be conducted through classroom lecture, live demonstrations, and practical exercises. The Operator course will also provide the driver/operator of a HEMTT M1977 A2 sufficient information and skills to minimize the risk of a rollover/accident which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced HEMTT M1977 A2 Operators/drivers. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 5-day operational class - $1000 per student 19
Army HEMTT A2 and A4 Operations: HEMTT THADD (M1120 Operations ) The HEMTT THADD (M1120) course will familiarize the students with the HEMTT THADD capabilities and operations. Students will be able to operate/drive the HEMTT THADD in a safe manner and utilize applicable model specific components. Instruction of operations and tasks will be conducted through classroom lecture, live demonstrations, and practical exercises. The Operator course will also provide the driver/operator of a HEMTT THADD sufficient information and skills to minimize the risk of a rollover/accident which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced HEMTT THADD (M1120) Operators/drivers. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 5-day operational class - $1000 per student HEMTT TFFT Operations The HEMTT TFFT course will familiarize the students with the HEMTT TFFT capabilities and operations. Students will be able to operate the Tactical Fire Fighting Truck (TFFT) in a safe, accurate and timely manner. This course introduces the student to the TFFT vehicle chassis and fire fighting components. The students will learn proper operation of the TFFT to include familiarization, operator maintenance, daily inspection, turret operations, pre-connect hand line operations. The Operator course will also provide the driver/operator of a HEMTT TFFT sufficient information and skills to minimize the risk of a rollover/accident which will minimize the risks of injuries and financial loss due to vehicle accidents. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 5-day operational class - $1000 per student 20
Army HEMTT A2/A4 Cargo (M977/985) Maintenance HEMTT A2 and A4 Maintenance: The HEMTT A2/A4 Cargo (M977/985) maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and other systems as they relate to the HEMTT A2/A4 Cargo maintenance activities. Instruction of maintenance procedures and theory will be conducted through classroom lecture, live demonstrations, and practical exercises. Upon completion of this course, trainees should have the skills required to identify, troubleshoot, service, and maintain components of the HEMTT A2/A4 Cargo and it s systems. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. 6-day maintenance - $1200 per student 9-day maintenance with A/C- $1800 per student 10-day maintenance - $2000 per student HEMTT A2/A4 Tractor (M983) Maintenance The HEMTT A2/A4 Tractor (M983) maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and other systems as they relate to the HEMTT A2/A4 Tractor maintenance activities. Instruction of maintenance procedures and theory will be conducted through classroom lecture, live demonstrations, and practical exercises. Upon completion of this course, trainees should have the skills required to identify, troubleshoot, service, and maintain components of the HEMTT A2/A4 Tractor and it s systems. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. 6-day maintenance - $1200 per student 9-day maintenance with A/C- $1800 per student 10-day maintenance - $2000 per student 21
Army HEMTT A2/A4 Tanker (M978) Maintenance HEMTT A2 and A4 Maintenance: The HEMTT A2/A4 Tanker (M978) maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and other systems as they relate to the HEMTT A2/A4 Tanker maintenance activities. Instruction of maintenance procedures and theory will be conducted through classroom lecture, live demonstrations, practical exercises and with the new Virtual Task Trainer multimedia system. Upon completion of this course, trainees should have the skills required to identify, troubleshoot, service, and maintain components of the HEMTT A2/A4 Tanker and it s systems. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. 6-day maintenance - $1200 per student 9-day maintenance with A/C- $1800 per student 10-day maintenance - $2000 per student HEMTT A2/A4 LHS W/PLST (M1120) Maintenance The HEMTT A2/A4 LHS (M1120) maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and other systems as they relate to the HEMTT A2/A4 LHS maintenance activities. Instruction of maintenance procedures and theory will be conducted through classroom lecture, live demonstrations, and practical exercises. Upon completion of this course, trainees should have the skills required to identify, troubleshoot, service, and maintain components of the HEMTT A2/A4 LHS and it s systems. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. 6-day maintenance - $1200 per student 9-day maintenance with A/C- $1800 per student 10-day maintenance - $2000 per student 22
Army HEMTT A2/A4 Wrecker (M984) Maintenance The HEMTT A2/A4 Wrecker (M984) maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and other systems as they relate to the HEMTT A2/A4 Wrecker maintenance activities. Instruction of maintenance procedures and theory will be conducted through classroom lecture, live demonstrations, and practical exercises. Upon completion of this course, trainees should have the skills required to identify, troubleshoot, service, and maintain components of the HEMTT A2/A4 Wrecker and it s systems. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. HEMTT A2 and A4 Maintenance: 6-day maintenance - $1200 per student 9-day maintenance with A/C- $1800 per student 10-day maintenance - $2000 per student HEMTT A2 CBT (M1977 A2) Maintenance The HEMTT A2 CBT (M1977 A2) maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and other systems as they relate to the HEMTT A2 CBT (M1977 A2) maintenance activities. Instruction of maintenance procedures and theory will be conducted through classroom lecture, live demonstrations, and practical exercises. Upon completion of this course, trainees should have the skills required to identify, troubleshoot, service, and maintain the HEMTT M1977 A2 and it s systems. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. 6-day maintenance - $1200 per student 8-day maintenance - $1600 per student 10-day maintenance - $2000 per student 23
Army HEMTT THADD (M1120 Maintenance ) HEMTT A2 and A4 Maintenance: The HEMTT THADD maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and other systems as they relate to the HEMTT THADD maintenance activities. Instruction of maintenance procedures and theory will be conducted through classroom lecture, live demonstrations, and practical exercises. Upon completion of this course, trainees should have the skills required to identify, troubleshoot, service, and maintain the HEMTT THADD and it s systems. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. 6-day maintenance - $1200 per student 8-day maintenance - $1600 per student 10-day maintenance - $2000 per student HEMTT TFFT Maintenance The HEMTT TFFT maintenance course will enable service personnel to troubleshoot vehicle problems, make necessary adjustments, perform preventative maintenance, understand and troubleshoot electronic problems, make necessary repairs, and become familiar with computer software. This course introduces the student to the TFFT vehicle chassis and fire fighting components. The students will learn proper operation, adjustments, and preventative maintenance and troubleshooting of agent piping, air, hydraulic, and basic electrical systems, electronic control systems used on the TFFT truck, electronic systems of Caterpillar Engines, Allison Transmissions, and Oshkosh Transfer case. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. 6-day maintenance - $1200 per student 8-day maintenance - $1600 per student 10-day maintenance - $2000 per student 24
Army PLS Operations: PLS Base W/ PLST Operations The PLS Base W/ PLST course will familiarize the students with the PLS Base capabilities and operations. After completion of this course, students will be able to successfully operate and maintain the PLS, PLS Trailer, and Flat Rack in a safe manner. Instruction of operations and tasks will be conducted through classroom lecture, live demonstrations, and practical exercises. The Operator course will also provide the driver/operator of a PLS Base, sufficient information and skills to minimize the risk of a rollover/accident which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced PLS Base operators/drivers. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 5-day operational class - $1000 per student PLS A1 W/ PLST Operations The PLS A1 W/ PLST course will familiarize the students with the PLS A1 capabilities and operations. After completion of this course, students will be able to successfully operate and maintain the PLS A1, PLS Trailer, and Flat Rack in a safe manner. Instruction of operations and tasks will be conducted through classroom lecture, live demonstrations, and practical exercises. The Operator course will also provide the driver/operator of a PLS A1, sufficient information and skills to minimize the risk of a rollover/accident which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced PLS A1 operators/drivers. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 5-day operational class - $1000 per student 25
Army PLS Maintenance: PLS Base W/ PLST Maintenance The PLS Base W/ PLST maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and other systems as they relate to the PLS Base maintenance activities. Instruction of maintenance procedures and theory will be conducted through classroom lecture, live demonstrations, and practical exercises. Upon completion of this course, trainees should have the skills required to identify, troubleshoot, service, and maintain components of the PLS Base and it s systems. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. 7-day maintenance - $1400 per student 8-day maintenance - $1600 per student 9-day maintenance - $1800 per student 10-day maintenance - $2000 per student PLS A1 W/ PLST Maintenance The PLS A1 W/ PLST maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and other systems as they relate to the PLS A1 maintenance activities. Instruction of maintenance procedures and theory will be conducted through classroom lecture, live demonstrations, and practical exercises. Upon completion of this course, trainees should have the skills required to identify, troubleshoot, service, and maintain components of the PLS A1 and it s systems. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. 7-day maintenance - $1400 per student 8-day maintenance - $1600 per student 9-day maintenance - $1800 per student 10-day maintenance - $2000 per student 26
Army HET Operations: Base HET W/ M1000 Trailer Operations The Base HET W/ M1000 Trailer course will familiarize the students with the PLS A1 capabilities and operations. This course is designed to provide both classroom and hands on practical applications related to operating the M1070 HET and M1000 trailer. Upon completion of this course students will have a solid understanding of tractor and trailer operations, operator maintenance, and operator troubleshooting. The Operator course will also provide the driver / operator of a Base HET sufficient information and skills to minimize the risk of a rollover/accident which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced Base HET w/ M1000 Trailer operators / drivers. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 5-day operational class - $1000 per student Base HET W/ Fontaine 635NL Trailer Operations The Base HET W/ Fontaine 635NL Trailer course will familiarize the students with the PLS A1 capabilities and operations. This course is designed to provide both classroom and hands on practical applications related to operating the Base HET and 635NL trailer. Upon completion of this course students will have a solid understanding of tractor and trailer operations, operator maintenance, and operator troubleshooting. The Operator course will also provide the driver / operator of a Base HET sufficient information and skills to minimize the risk of a rollover/accident which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced Base HET w/ 635NL Trailer operators / drivers. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 5-day operational class - $1000 per student 27
Army HET Operations & Maintenance: HET A1 W/ M1000 Trailer Operations The HET A1 W/ M1000 Trailer course will familiarize the students with the M1070 HET A1 capabilities and operations. This course is designed to provide both classroom and hands on practical applications related to operating the M1070 HET A1 and M1000 trailer. Upon completion of this course students will have a solid understanding of tractor and trailer operations, operator maintenance, and operator troubleshooting. The Operator course will also provide the driver / operator of a HET A1 sufficient information and skills to minimize the risk of a rollover/accident which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced HET A1 w/ M1000 Trailer operators / drivers. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 5-day operational class - $1000 per student Base HET W/M1000 Trailer Maintenance The Base HET W/M1000 Trailer maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and other systems as they relate to the Base HET and M1000 Trailer maintenance activities. Instruction of maintenance procedures and theory will be conducted through classroom lecture, live demonstrations, and practical exercises. Upon completion of this course, trainees should have the skills required to identify, troubleshoot, service, and maintain components of the Base HET, M1000 trailer, and their systems. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. 5-day maintenance (Tractor Only)- $1000 per student 7-day maintenance - $1400 per student 10-day maintenance - $2000 per student 28
Army HET Maintenance: Base HET W/Fontaine 635NL Trailer Maintenance The Base HET W/ Fontaine 635NL Trailer maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and other systems as they relate to the Base HET and Fontaine 635NL Trailer maintenance activities. Instruction of maintenance procedures and theory will be conducted through classroom lecture, live demonstrations, and practical exercises. Upon completion of this course, trainees should have the skills required to identify, troubleshoot, service, and maintain components of the Base HET, Fontaine 635NL, and their systems. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. 5-day maintenance (Tractor Only)- $1000 per student 7-day maintenance - $1400 per student 10-day maintenance - $2000 per student HET A1 W/M1000 Trailer Maintenance The HET A1 W/M1000 Trailer maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and other systems as they relate to the HET A1 and M1000 Trailer maintenance activities. Instruction of maintenance procedures and theory will be conducted through classroom lecture, live demonstrations, and practical exercises. Upon completion of this course, trainees should have the skills required to identify, troubleshoot, service, and maintain components of the HET A1, M1000 trailer, and their systems. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. 5-day maintenance (Tractor Only)- $1000 per student 7-day maintenance - $1400 per student 10-day maintenance - $2000 per student 29
Army FMTV (All Variant) Operations FMTV Operations & Maintenance: The FMTV course will familiarize the students with the capabilities and operations of the FMTV lineup of vehicles. This course is designed to provide both classroom and hands on practical applications related to operating the FMTV. Upon completion of this course students will have a solid understanding of vehicle operations, operator maintenance, and operator troubleshooting. The Operator course will also provide the operator of an FMTV sufficient information and skills to minimize the risk of a rollover/accident which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced FMTV operators. Variants include; Tractor, Cargo (W/ trailer and crane), Expansible Van, Van, and the Wrecker. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 3-day familiarization - $600 per student FMTV (All Variant) Maintenance The FMTV All Variant maintenance course will enable maintenance personnel to maintain, troubleshoot, and repair the mechanical, electrical, hydraulic, and pneumatic systems of the FMTVA1P2 series of 2.5-ton and 5-ton vehicles. This course is designed to provide both new and seasoned maintainers with a practical understanding of the maintenance requirements of the FMTVA1P2 vehicles, including safety guidelines, systems and components, theory of operation, diagnostic skills, and practical troubleshooting. Variants include; Tractor, Cargo (W/ trailer and crane), Expansible Van, Van, and the Wrecker. 5-day maintenance (All Variant)- $1000 per student 7-day maintenance (W/ A/C no cert)- $1400 per student 30
Army FMTV Advanced Electrical & Hydraulics (All Variants) The FMTV Advanced Electrical and Hydraulics course will enable maintenance personnel to maintain, troubleshoot, and repair the electric & hydraulic systems of the FMTVA1P2 series of vehicles. This course is designed to provide both new and seasoned maintainers with a practical understanding of the maintenance requirements of the FMTVA1P2 electric & hydraulic systems, including safety guidelines, systems and components, theory of operation, diagnostic skills, and practical troubleshooting. Variants include; Tractor, Cargo (W/ trailer and crane), Expansible Van, Van, and the Wrecker. FMTV Maintenance & M-ATV (MRAP) Operations : 5-day adv Electrical (All Variant)- $1000 per student M-ATV (MRAP) Operations The M-ATV Operators course is designed to provide the knowledge and skills required by the operator to properly perform the operation and operator level maintenance of the M-ATV. By using both classroom and practical applications the students are provided driving opportunities. Instruction includes: vehicle capabilities, location and operation of vehicle controls and indicators, understanding and use of the BII items, emergency egress, flat towing and vehicle recovery using the self recovery winch, operator troubleshooting and maintenance, and day and nighttime driving. Operations courses utilize a 1:6 instructor to student ratio to ensure a safe training environment. Two instructors are required for a maximum class size of 12 students. All classes run from 8am thru 4pm with a hour lunch 5 Day Operator Class - $2972.00 / Student Classes Held At Unit Location 31
Army M-ATV (MRAP) Maintenance: M-ATV (MRAP) Maintenance The M-ATV Maintenance course is designed to provide the knowledge and skills required by the maintainers to properly perform maintenance and troubleshooting of the M-ATV. With the use of classroom and practical applications on the vehicles the students are provided troubleshooting and maintenance opportunities. The 5 day instruction includes: vehicle capabilities, location and operation of vehicle controls and indicators, basic electrical systems, basic engine system, air system, steering system, power train, and basic trouble shooting. The 10-day Maintenance course includes all of the 5-day instruction plus advanced electrical theory and hands on time, advanced databus troubleshooting, advanced charging system troubleshooting and maintenance, advanced starting system troubleshooting, advance schematic reading and advance troubleshooting skills. All classes run from 8am thru 4pm with an hour lunch 5 Day Maintenance Course - $1000.00 / Student 10 Day Maintenance Course - $2000.00 / Student M-ATV (MRAP) Advanced Electrical The M-ATV (MRAP) Advanced Electrical course will enable maintenance personnel to maintain, troubleshoot, and repair the electrical systems of the M-ATV (MRAP) series of vehicles. This course is designed to provide both new and seasoned maintainers with a practical understanding of the maintenance requirements of the M-ATV (MRAP) electrical systems, including safety guidelines, systems and components, theory of operation, diagnostic skills, and practical troubleshooting. The technician taking this course should have completed an M-ATV (MRAP) maintenance course or have equivalent experience / knowledge. 5-day maintenance - $1000 per student 32
Navy / Marines MTVR Operations: MTVR Cargo Operations The MTVR Cargo Operator course is designed to train the operator on the safe operations of the MTVR Cargo variants and its systems. Besides basic vehicle characteristics and operations, the students will additionally learn self recovery winch operations. A focus on operator maintenance and troubleshooting is included in this course. These lessons will be conducted through classroom lecture, demonstrations, drive time and practical exercises providing a practical and dynamic learning experience. Operations courses utilize a 1:6 instructor to student ratio to ensure a safe training environment. Two instructors are required for a maximum class size of 12 students. 5-day operational class - $2972 per student Classes Held At Unit Location MTVR Tractor Operations The MTVR Tractor Operator course is designed to train the operator on the safe operations of the MTVR Tractor and its systems. Besides basic vehicle characteristics and operations, the students will additionally learn trailer coupling/uncoupling and backing skills. A focus on operator maintenance and troubleshooting is included in this course. These lessons will be conducted through classroom lecture, demonstrations, drive time and practical exercises providing a practical and dynamic learning experience. Operations courses utilize a 1:6 instructor to student ratio to ensure a safe training environment. Two instructors are required for a maximum class size of 12 students. 5-day operational class - $2972 per student Classes Held At Unit Location 33
Navy / Marines MTVR Wrecker Operations MTVR Operations & Maintenance: The MTVR Wrecker Operator course is designed to train the operator on the safe operations of the MTVR Wrecker and its systems. Besides basic vehicle characteristics and operations, the students will additionally learn the crane, retrieval, and lift and tow operations. A focus on operator maintenance and troubleshooting is included in this course. These lessons will be conducted through classroom lecture, demonstrations, drive time, and practical exercises providing a practical and dynamic learning experience. Operations courses utilize a 1:6 instructor to student ratio to ensure a safe training environment. Two instructors are required for a maximum class size of 12 students. 5-day operational class - $2972 per student Classes Held At Unit Location MTVR Cargo Maintenance The MTVR Cargo maintenance course is designed to enable maintenance personnel with the skills to properly troubleshoot and maintain the MTR Cargo variants. Instruction will include the maintenance and troubleshooting of the electrical, pneumatic, hydraulic and mechanical systems found on the MTVR Cargo. Instruction will consist of system components and circuit theory that the students will utilize in order to properly diagnosis a MTVR Cargo variants using the Interactive Electronic Tech Manual. These lessons will be conducted through classroom lecture, demonstrations, and practical exercises providing a practical and dynamic learning experience for the new and seasoned mechanics 7-day maintenance - $1400 per student Classes are held at Oshkosh regional service centers in Jacksonville, NC or Temecula, CA 34
Navy / Marines MTVR Maintenance: MTVR Tractor Maintenance The MTVR Tractor maintenance course is designed to enable maintenance personnel with the skills to properly troubleshoot and maintain the MTR Tractor variant. Instruction will include the maintenance and troubleshooting of the electrical, pneumatic, hydraulic and mechanical systems found on the MTVR Tractor to include the fifth wheel and hydraulic suspension. Instruction will consist of system components and circuit theory that the students will utilize in order to properly diagnosis a MTVR Tractor variant using the Interactive Technical Manual. These lessons will be conducted through classroom lecture, demonstrations, and practical exercises providing a practical and dynamic learning experience for the new and seasoned mechanics. 7-day maintenance- $1400 per student Classes are held at Oshkosh regional service centers in Jacksonville, NC or Temecula, CA MTVR Wrecker Maintenance The MTVR Wrecker maintenance course is designed to enable maintenance personnel with the skills to properly troubleshoot and maintain the MTR Wrecker variant. Instruction will include the maintenance and troubleshooting of the electrical, pneumatic, hydraulic and mechanical systems found on the MTVR Wrecker to include the crane, heavy duty retrieval winches, retrieval system, and the hydraulic suspension. Instruction will consist of system components and circuit theory that the students will utilize in order to properly diagnosis a MTVR Wrecker variant using the Interactive Technical Manual. These lessons will be conducted through classroom lecture, demonstrations, and practical exercises providing a practical and dynamic learning experience for the new and seasoned mechanics. 10-day maintenance - $2000 per student Classes are held at Oshkosh regional service centers in Jacksonville, NC or Temecula, CA 35
Navy / Marines MTVR Maintenance: MTVR Advanced Electrical & Hydraulics (All Variants) The MTVR Advanced Electrical and Hydraulics course will enable maintenance personnel to maintain, troubleshoot and repair the electrical and hydraulic systems of the MTVR series of vehicles utilizing the IETM and paper schematics. This course is designed to provide maintainers with an advanced understanding of systems and components, diagnostic skills and practical troubleshooting. The technician taking this course should have completed a MTVR Maintenance course or have experience/knowledge of MTVR systems. 5-day adv Electrical (All Variant)- $1000 per student Classes are held at Oshkosh regional service centers in Jacksonville, NC or Temecula, CA MTVR Variant Conversion Intended for wheeled mechanics with experience and training on the MTVR Cargo variant, the Variant Conversion course focuses on the specific systems of the MTVR Wrecker and Tractor variants, including fifth wheel maintenance, hydraulic suspension, and crane system. It focuses upon theory of operation, electric and hydraulic systems troubleshooting utilizing the IETM. Mechanics taking this course should have completed an MTVR Cargo Maintenance course or have equivalent experience with the Cargo variant. All classes begin at 8 a.m. and finish around 4 p.m. each 5-day MTVR Variant Conversion - $1000 per Student Classes are held at Oshkosh regional service centers in Jacksonville, NC or Temecula, CA 36
Navy / Marines LVSR Cargo Operations LVSR Operations & Maintenance: The LVSR Cargo course will familiarize the students with the capabilities and operations of the LVSR Cargo vehicle. This course is designed to provide both classroom and hands on practical applications related to operating, loading and unloading the LVSR Cargo vehicle. Upon completion of this course students will have a solid understanding of vehicle operations, operator level maintenance, and operator level troubleshooting. The course is designed for both novice and the experienced LVSR Cargo operators. 5-day operational class - $2972 per student LVSR Cargo Maintenance The LVSR Cargo maintenance course will enable students to understand the theory of operation of the vehicle as it relates to maintenance activities. Instruction of maintenance procedures and theory will be conducted on hydraulic, pneumatic, electrical, and other systems through classroom lecture, live demonstrations, and practical exercises. Upon completion of this course, trainees should have the skills required to identify, troubleshoot, service, and maintain all systems of the LVSR Cargo. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. 10-day maintenance - $2000 per student 37
Navy / Marines M-ATV (MRAP) Operations M-ATV (MRAP) Operations & Maintenance: The M-ATV Operators course is designed to provide the knowledge and skills required by the operator to properly perform the operation and operator level maintenance of the M-ATV. By using both classroom and practical applications the students are provided driving opportunities. Instruction includes: vehicle capabilities, location and operation of vehicle controls and indicators, understanding and use of the BII items, emergency egress, flat towing and vehicle recovery using the self recovery winch, operator troubleshooting and maintenance, and day and nighttime driving. Operations courses utilize a 1:6 instructor to student ratio to ensure a safe training environment. Two instructors are required for a maximum class size of 12 students All classes run from 8am thru 4pm with a hour lunch 5 Day Operator Class - $2972.00 / Student Classes Held At Unit Location M-ATV (MRAP) Maintenance The M-ATV Maintenance course is designed to provide the knowledge and skills required by the maintainers to properly perform maintenance and troubleshooting of the M-ATV. With the use of classroom and practical applications on the vehicles the students are provided troubleshooting and maintenance opportunities. The 5 day instruction includes: vehicle capabilities, location and operation of vehicle controls and indicators, basic electrical systems, basic engine system, air system, steering system, power train, and basic trouble shooting. The 10-day Maintenance course includes all of the 5-day instruction plus advanced electrical theory and hands on time, advanced databus troubleshooting, advanced charging system troubleshooting and maintenance, advanced starting system troubleshooting, advance schematic reading and advance troubleshooting skills. All classes run from 8am thru 4pm with an hour lunch 5 Day Maintenance Course - $1000.00 / Student 10 Day Maintenance Course - $2000.00 / Student 38
Navy / Marines M-ATV (MRAP) Maintenance: M-ATV (MRAP) Advanced Electrical The M-ATV 5-day Advanced Electrical Maintenance course is designed to provide the knowledge and skills required by the mid-level maintainer to properly perform advanced maintenance and troubleshoot the M-ATV. With the use of classroom and practical applications on the vehicles the students are provided advanced troubleshooting and maintenance opportunities. Students are provide instruction in advanced electrical theory and hands on time, advanced databus troubleshooting, advanced charging system troubleshooting and maintenance, advanced starting system troubleshooting, advance schematic reading and advance troubleshooting skills. All classes run from 8am thru 4pm with an hour lunch 5 Day Advanced Electrical Course - $1000.00 / Student 39
Air Force & Army Municipal T-Series Operation Airport Rescue and Fire Fighting (ARFF): The T-Series Operator course will enable students to understand the theory of operation of the vehicle driving, fire fighting, piping, air and auxiliary agent systems as they relate to vehicle operation activities. In a classroom, shop and field setting, using vehicle manuals, student guides, and Oshkosh ARFF vehicles, the students will identify major components and operate the major systems of the ARFF vehicle. The Operator course will also provide the driver of an ARFF vehicle sufficient information and skills to minimize the risk of a rollover/accident which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced ARFF Operators/Fire Fighters. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 3-day operation class - $600 per student 4-day operational class - $800 per student T-Series Maintenance The T-Series Maintenance course will enable students to understand the theory of operation of the vehicle fire fighting, hydraulic, piping, pneumatic, electrical, and auxiliary agent systems as they relate to vehicle maintenance activities. In addition, proper repair and diagnosis of the above systems will include power divider, hydraulic fan, steering, water piping, foam metering, quick buildup, air braking, auxiliary air, agent air, chassis electrical, agent electrical, engine electrical, transmission electrical, optional electrical, dry chemical, and Halotron systems. The course is designed for both novice and the experienced ARFF technicians. 5-day maintenance - $1000 per student 40
Air Force & Army Municipal Striker Operation Airport Rescue and Fire Fighting (ARFF): The Striker Operator course will enable students to understand the theory of operation of the vehicle driving, fire fighting, piping, air and auxiliary agent systems as they relate to vehicle operation activities. In a classroom, shop and field setting, using vehicle manuals, student guides, and Oshkosh ARFF vehicles, the students will identify major components and operate the major systems of the ARFF vehicle. The Operator course will also provide the driver of an ARFF Striker vehicle sufficient information and skills to minimize the risk of a rollovers/accidents which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced ARFF Operators/Fire Fighters. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 4-day operational class - $800 per student 5-day operational class - $1000 per student Striker Maintenance The Striker Maintenance course will enable students to understand the theory of operation of the vehicle fire fighting, hydraulic, piping, pneumatic, electrical, and auxiliary agent systems as they relate to vehicle maintenance activities. In addition, proper repair and diagnosis of the above systems will include power divider, hydraulic fan, steering, water piping, foam metering, quick buildup, air braking, auxiliary air, agent air, chassis electrical, agent electrical, engine electrical, transmission electrical, optional electrical, dry chemical, and Halotron systems. The course is designed for both novice and the experienced ARFF technicians. 5-day maintenance - $1000 per student 41
Air Force & Army Municipal Striker Advanced Electrical Airport Rescue and Fire Fighting (ARFF): The Advanced Electrical course will enable the student to understand the theory of operation of the vehicle engine, transmission, braking, turret control, elevated waterway, CanTrak, and auxiliary electrical systems as they relate to electrical controls. In addition, the students will learn the proper repair and diagnosis of the above systems to include Caterpillar, Allison, WABCO ABS, Electronic Foam Metering, Elevated Waterway Control, Turret Control, Multiplexing, and optional systems. This course offers extensive schematic use and troubleshooting exercises. The course is designed for both the novice and the experienced ARFF technician. Students taking this course should have completed Striker maintenance course or have equivalent experience. 4-day Advanced - $800 per student Striker & T-Series Wheel End Rebuild The Striker & T-Series wheel end rebuild course is designed to train service technicians on troubleshooting and repair of the Striker & T-Series wheel ends. Our instructors strive to use hands-on training in the shop to help the technician learn how to identify, maintain, troubleshoot, remove, replace, disassemble, inspect, and reassemble the Striker & T-Series wheel end components safely. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. The technician taking this course should have completed a maintenance course or have equivalent experience/knowledge. 1-day Striker / Ti-series Wheel End rebuild - $200/student 42
Air Force & Army Municipal Snow Removal: P-Series Operation The P-Series Operator course will enable students to understand the theory of operation of the vehicle driving, snow removal, air and De-Icing systems as they relate to vehicle operation activities. In a classroom, shop and field setting, using vehicle manuals, student guides, and Oshkosh Snow vehicles, the students will identify major components, perform preventative maintenance checks and operate the major systems of the P-Series vehicle. The Operator course will also provide the driver of a P-Series vehicle sufficient information and skills to minimize the risk of a rollovers/accidents which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced snow removal operators. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 3-day operation class - $600 per student 4-day operational class - $800 per student MPT-Series Operation The MPT-Series Operator course will enable students to understand the theory of operation of the vehicle driving, snow removal, air and De-Icing systems as they relate to vehicle operation activities. In a classroom, shop and field setting, using schematics, vehicle manuals, student guides, and Oshkosh Snow vehicles, the students will identify major components, perform preventative maintenance checks and operate the major systems of the MPT-Series vehicle. The Operator course will also provide the driver of an MPT-Series vehicle sufficient information and skills to minimize the risk of a rollovers/accidents which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced snow removal operators. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 4-day operational class - $800 per student 43
Air Force & Army Municipal Snow Removal: H-Series (Pre 2007) Operation The H-Series Operator course will enable students to understand the theory of operation of the vehicle driving, snow removal, air and auxiliary systems as they relate to vehicle operation activities. In a classroom, shop and field setting, using vehicle manuals, student guides, and Oshkosh Snow vehicles, the students will identify major components, perform preventative maintenance checks and operate the major systems of the H-Series vehicle. The Operator course will also provide the driver of an H-Series vehicle sufficient information and skills to minimize the risk of a rollovers/accidents which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced snow removal operators. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 3-day operation class - $600 per student 4-day operational class - $800 per student H-Series (Post 2007) Operation The H-Series Operator course will enable students to understand the theory of operation of the vehicle driving, snow removal, air, Command Zone and auxiliary systems as they relate to vehicle operation activities. In a classroom, shop and field setting, using vehicle manuals, student guides, and Oshkosh Snow vehicles, the students will identify major components, perform preventative maintenance checks and operate the major systems of the H-Series vehicle. The Operator course will also provide the driver of an H-Series vehicle sufficient information and skills to minimize the risk of a rollovers/accidents which will minimize the risks of injuries and financial loss due to vehicle accidents. The course is designed with numerous levels for both novice and the experienced snow removal operators. 1-day familiarization only - $200 per student 2-day familiarization and PMCS. - $400 per student 3-day operation class - $600 per student 4-day operational class - $800 per student 44
Air Force & Army Municipal Snow Removal: P-Series Maintenance The P-Series Maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and certain snow removal systems as they relate to vehicle maintenance activities. Using classroom and plenty of hands-on training, the technician will learn proper operation, lubrication, adjustments, and troubleshooting of the P-Series electrical, steering/suspension, drive train, engine, pneumatic, and hydraulic systems. The course is designed for both novice and the experienced P- Series technicians. 5-day maintenance - $1000 per student MPT-Series Maintenance The MPT-Series Maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and certain snow removal systems as they relate to vehicle maintenance activities. Using classroom and plenty of hands-on training, the technician will learn proper operation, lubrication, adjustments, and troubleshooting of the MPT-Series electrical, steering/suspension, drive train, engine, pneumatic, and hydraulic systems. The course is designed for both novice and the experienced MPT- Series technicians. 5-day maintenance - $1000 per student 45
Air Force & Army Municipal Snow Removal: H-Series (Pre 2007) Maintenance The five-day H-Series Maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and certain snow removal systems as they relate to vehicle maintenance activities. Using classroom and plenty of hands-on training, the technician will learn proper operation, lubrication, adjustments, and troubleshooting of the chassis, hydraulic, air, and electronic systems used on the H-Series snow removal equipment. The course is designed for both novice and the experienced H- Series technicians. Note: H-Series Maintenance courses are offered in two versions with Command Zone electronics for vehicles 2007 and newer, and a Pre-2007 course for vehicles without Command Zone electronics. 5-day maintenance - $1000 per student H-Series (Post 2007) Maintenance The five-day H-Series Maintenance course will enable students to understand the theory of operation of the vehicle hydraulic, pneumatic, electrical, and certain snow removal systems as they relate to vehicle maintenance activities. Using classroom and plenty of hands-on training, the technician will learn proper operation, lubrication, adjustments, and troubleshooting of the chassis, hydraulic, air, Command Zone, and other electronic systems used on the H-Series snow removal equipment. The course is designed for both novice and the experienced H-Series technicians. Note: H-Series Maintenance courses are offered in two versions with Command Zone electronics for vehicles 2007 and newer, and a Pre-2007 course for vehicles without Command Zone electronics. 5-day maintenance - $1000 per student 46
Air Force & Army Municipal Snow Removal: H-Series Advanced Electronics The four-day Advanced Electronics Class is a course in which students will learn theory, operation and logic of advanced electronic systems used on Oshkosh s Command Zone H- Series. Operation, logic, interfacing and diagnostics of the drive engine, transmission, blower engine, and various Command Zone systems will be covered in detail. The technician will learn to identify the electronic system components, understand component operation and practice component diagnostics and repair, and be introduced to computer-based electronic software used for parameter monitoring, system diagnostics, and troubleshooting. Students taking this course should have completed H-Series maintenance course or have equivalent experience. 4-day Advanced - $800 per student Command Zone Diagnostics The Command Zone Diagnostics class is a course in which students will learn theory, operation and logic of advanced electronic systems used on the H-Series Command Zone system. Operation, logic, interfacing and diagnostics of the various Command Zone systems will be covered in detail. The technician will learn to identify the system components, understand component operation and practice component diagnostics and repair, and be introduced to computer-based electronic software used for parameter monitoring, system diagnostics, and troubleshooting. Students taking this course should have completed H-Series maintenance course or have equivalent experience. 3-day Command Zone Diagnostics - $600 per student 47
Air Force & Army Municipal M-ATV (MRAP) Operations M-ATV (MRAP) Operations & Maintenance: The M-ATV Operators course is designed to provide the knowledge and skills required by the operator to properly perform the operation and operator level maintenance of the M-ATV. By using both classroom and practical applications the students are provided driving opportunities. Instruction includes: vehicle capabilities, location and operation of vehicle controls and indicators, understanding and use of the BII items, emergency egress, flat towing and vehicle recovery using the self recovery winch, operator troubleshooting and maintenance, and day and nighttime driving. Operations courses utilize a 1:6 instructor to student ratio to ensure a safe training environment. Two instructors are required for a maximum class size of 12 students All classes run from 8am thru 4pm with a hour lunch 5 Day Operator Class - $2972.00 / Student Classes Held At Unit Location M-ATV (MRAP) Maintenance The M-ATV Maintenance course is designed to provide the knowledge and skills required by the maintainers to properly perform maintenance and troubleshooting of the M-ATV. With the use of classroom and practical applications on the vehicles the students are provided troubleshooting and maintenance opportunities. The 5 day instruction includes: vehicle capabilities, location and operation of vehicle controls and indicators, basic electrical systems, basic engine system, air system, steering system, power train, and basic trouble shooting. The 10-day Maintenance course includes all of the 5-day instruction plus advanced electrical theory and hands on time, advanced databus troubleshooting, advanced charging system troubleshooting and maintenance, advanced starting system troubleshooting, advance schematic reading and advance troubleshooting skills. All classes run from 8am thru 4pm with an hour lunch 5 Day Maintenance Course - $1000.00 / Student 10 Day Maintenance Course - $2000.00 / Student 48
Air Force & Army Municipal M-ATV (MRAP) Maintenance: M-ATV (MRAP) Advanced Electrical The M-ATV 5-day Advanced Electrical Maintenance course is designed to provide the knowledge and skills required by the mid-level maintainer to properly perform advanced maintenance and troubleshoot the M-ATV. With the use of classroom and practical applications on the vehicles the students are provided advanced troubleshooting and maintenance opportunities. Students are provide instruction in advanced electrical theory and hands on time, advanced databus troubleshooting, advanced charging system troubleshooting and maintenance, advanced starting system troubleshooting, advance schematic reading and advance troubleshooting skills. All classes run from 8am thru 4pm with an hour lunch 5 Day Advanced Electrical Course - $1000.00 / Student 49
Specialized Courses: Air Conditioning Maintenance The Air Conditioning Maintenance course is designed to train service technicians on troubleshooting and repair of mobile HVAC systems. Our instructors strive to use hands-on training in the shop to help the technician learn to maintain, troubleshoot, and repair the heating, ventilation, & air conditioning (HVAC) system of Oshkosh and other vehicles. This course is designed to provide both new and seasoned maintainers with a practical understanding of the maintenance requirements of the HVAC system, including safety guidelines, systems and components, theory of operation, diagnostic skills, and practical troubleshooting. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. Technicians taking this course should have completed a vehicle maintenance course or have equivalent experience. 2-day Air Conditioning maintenance - $400 per student Optional Air Conditioning Certification course scheduled for the day following Air Conditioning maintenance course. Air Conditioning Certification The Air Conditioning Certification course is designed to train service technicians on testing, recovering and recycling refrigerant in mobile HVAC systems. Our instructors strive to use hands-on training in the shop to help the technician learn to test and recover/recycle refrigerant in accordance with the Environmental Protection Agency (EPA) standards set forth under section 609 of the Clean Air Act Amendments of 1990. Students will then test and obtain MACS certification for refrigerant recovery/recycling. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. Technicians taking this course should have completed a mobile HVAC maintenance course or have equivalent experience. 1-day Certification - $200 per student Class is scheduled for the day following the Air Conditioning Maintenance course. 50
Specialized Courses: HEMTT & PLS Crane Maintenance and Load Testing The Crane Maintenance and Load Testing course is designed to give the student an understanding of how to operate, troubleshoot and maintain the HEMTT & PLS material handling crane. The technician will learn to identify the crane system components, understand component operation and practice component diagnostics and repair. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. 2-day Crane Maintenance & Load Testing - $400 per day Oshkosh FHTV Advanced Electrical and Hydraulics The Oshkosh Military Advanced Electrical and Hydraulics course is designed to help the technician to understand electrical & hydraulic theory and the rules and laws that govern electrical/hydraulic circuit design, identify and understand the electrical/hydraulic systems that make up the FHTVs and have the ability to use tools and schematics to troubleshoot the electrical & hydraulic systems on the FHTVs. This includes Electrical & Hydrualic Fundamentals, Wire Connector Repair, & the J1939 Databus, Engine, Transmission, hydraulic and ABS systems. Upon completion of this course, trainees should have the skills required to identify, troubleshoot, and repair the vehicles electrical & hydraulic systems. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. The technician taking this course should have completed a HEMTT, PLS or HET maintenance course or have equivalent experience / knowledge. 10-day 2 part maintenance (week 1 Electrical, week 2 hydraulic) - $2500per student 51
Specialized Courses: HEMTT Wheel End & Axle Rebuild The HEMTT wheel end & Axle rebuild course is designed to train service technicians on troubleshooting and repair of the HEMTT wheel ends & axles. Our instructors strive to use handson training in the shop to help the technician learn how to identify, maintain, troubleshoot, remove, replace, disassemble, inspect, and reassemble the HEMTT wheel end & axle components safely. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. The technician taking this course should have completed a HEMTT maintenance course or have equivalent experience / knowledge. 4-day HEMTT Wheel End & Axle Rebuild - $ 800 per student HET Wheel End & Axle Rebuild The HET wheel end & Axle rebuild course is designed to train service technicians on troubleshooting and repair of the HET wheel ends and axles. Our instructors strive to use hands-on training in the shop to help the technician learn how to identify, maintain, troubleshoot, remove, replace, disassemble, inspect, and reassemble the HET wheel end & Axle components safely. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. The technician taking this course should have completed a HET maintenance course or have equivalent experience / knowledge. 4-day HET Wheel End & Axle Rebuild - $ 800 per student 52
Specialized Courses: PLS Wheel End & TAK-4 Rebuild The PLS Wheel End & TAK-4 rebuild course is designed to be a comprehensive course that will enable mechanics to troubleshoot, maintain, repair, and replace components and assemblies of the TAK-4 independent suspension and a planetary wheel end. The mechanic will learn how to identify, maintain, troubleshoot, repair, and replace the components and subassemblies by utilizing the Interactive Electrical Technical Manual (IETM). This course will include classroom led instruction followed by in-depth hands-on practical application to enhance the learning experience. 3-day PLS Wheel End & TAK 4 Rebuild Course - $600 per student MTVR / LVSR Wheel End & TAK-4 Rebuild The MTVR / LVSR wheel end & TAK-4 rebuild course is designed to be a comprehensive course that will enable mechanics to troubleshoot, maintain, repair, and replace components and assemblies of the TAK-4 independent suspension and a planetary wheel end. The mechanic will learn how to identify, maintain, troubleshoot, repair, and replace the components and subassemblies by utilizing the Interactive Electrical Technical Manual (IETM). This course will include classroom led instruction followed by in-depth hands-on practical application to enhance the learning experience. 3-day MTVR / LVSR Wheel End & TAK 4 Rebuild Course - $600 per student 53
Specialized Courses: Caterpillar C15 Injector R&R, Valve Adjustment and Electronic Troubleshooting Caterpillar C15 Injector Removal/Replacement, Valve Adjustment, & Electronic Troubleshooting course is designed to give the student an understanding of how to troubleshoot, test, remove and replace the injectors, adjust the valve train and identify, troubleshoot, and replace the various sensors that control the operation of a Caterpillar C15 engine. The technician will learn to identify the valve train & injector components, understand component operation and practice component diagnostics, removal, replacement and adjustments. They will also learn to identify the engine sensors, understand sensor operation and practice electronic diagnostics and repair. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. Courses would be conducted in Oshkosh, WI. 3-day Caterpillar C15 Injector Removal/Replacement, Valve Adjustment, & Electronic Troubleshooting - $600 per student 55000 Series Transfer Case Rebuild The 55000 Series transfer case rebuild course is designed to train service technicians on troubleshooting and repair of the 55000 Series transfer case. Our instructors strive to use handson training in the shop to help the technician learn how to identify, maintain, troubleshoot, remove, replace, disassemble, inspect, and reassemble the 55000 Series transfer case components safely. Skills exercises provide a practical and dynamic learning experience for both new and seasoned service technicians. The technician taking this course should have completed a maintenance course or have equivalent experience / knowledge. 4-day 55000 Series Transfer Case Rebuild - $800/student 54
Online Registration To Register for an Upcoming Class go to For Defense Vehicle Training: http://www.oshkoshdefense.com/class-schedule For ARFF Vehicle Training: http://www.oshkoshairport.com/en/oshkosh/snow-training-(1).aspx For Snow Removal Vehicle Training: http://www.oshkoshairport.com/en/oshkosh/snow-training.aspx Just click on the link marked Register next to the desired class name and date and fill out the form inside. 55
Course Resource Guide Training Services Defense Industries For Class Schedules, Registration, and Custom Training Solutions Contact Our Office Directly at PO Box 2566 Oshkosh, WI 54903-2566 Phone: 920-233-9331 Fax: 920-233-9480 Toll Free: 800-235-9151 Ext 22331 Email: www.oshkoshcorporation.com/training Check us out on the Web @ Training Products : http://oshkoshcorp.com/training/ Defense Products : http://www.oshkoshdefense.com/ Airport Products : http://www.oshkoshairport.com Ask your Sales and Service Representatives, Dealers or Contact your local Field Service Representative