LOADER ATTACHMENTS SKIDSTEER ATTACHMENTS SNOW BLADES CUSTOM made attachments to fit any loader or skid steer 1-800-698-5510 www.martatch.com
PRODUCT INDEX ATTACHMENTS Page Buckets 2-3 Bale Spears 4 Manure Forks 5 Stone Forks 5 Grapples 6-7 Pallet Forks 8-9 Logging Equipment 10-11 Lift Boom 11 Rotary Cutter 11 Gardening 12 Industrial 13 SNOWBLADES Snowblades 14-18 Custom made attachments to fit any loader or skid steer. 1-800-698-5510 1
BUCKETS PRODUCT MARTATCH buckets, and all other attachments, are built with the end user in mind. With our roots as farmers, we know the abuse, and wear and tear, that attachments need to go through to get the job done. Each attachment is reinforced and gussetted to make it strong and durable for years after purchase. Attachments are stocked for fast turn arounds but custom pieces are built constantly as well. Give us a call at 1-800-698-5510 for your needs today. High dump Bucket Increases height of dump piles manure higher in your storage Skidsteer / Loader Bucket ¼ material used for body hardened side cutting edge for longer wear life ¾ x 6 hardened cutting edge trailer hitch for front towing available will custom fabricate to any size or specifications skidsteer bucket shown 2 www.martatch.com
GUIDE BUCKETS Skidsteer / loader Buckets Ice Scraper Attachment The ice scraper easily attaches and detaches with a single hitch pin Hitch Chain Hook is inside bucket to prevent chain snapping at operator Skidsteer Bucket Steps Heavy Duty Tooth Bucket extreme duty teeth hardened side wear plates pointed side for better penetration telehandler & wheel loader bucket Standard bucket floors are constructed with AR400 Steel extra heavy duty construction for high capacity work loads OPTIONAL: grill to prevent overflow High Volume LOADER, Heavy Duty, High Volume, Bucket ¼ material used for body inside gussets for more strength hardened side cutting edge for longer wear life ¾ x 6 hardened cutting edge trailer hitch for front towing available will custom fabricate to any size or specifications (loader bucket shown) Loader bucket with top guard ¼ material used for body inside gussets for more strength hardened side cutting edge for longer wear life ¾ x 6 hardened cutting edge top guard for bigger loads trailer hitch for front towing available will custom fabricate to any size or specifications 1-800-698-5510 3
BALE SPEARS PRODUCT safety frame BALE SPEAR top safety frames are removable for higher stacking capabilites under truss and low buildings safety frames easily remove without tools available in 26 and 36 high see through backplate for better visibility at truck level 32, 39, and 49 spear lengths 46 wide frames (30 tine spacing) available with any amount of tines to suit your needs 3-POINT HITCH BALE SPEAR standard 3-point hitch mounts 46 wide frames (30 tine spacing) available with any amount of tines to suit your needs 32, 39, and 49 spear lengths compact utility BALE SPEAR safety frames can be easily removed light duty bale spears economical pricing 20-40 hp tractors and skid steers light weight to maximize the lifting capacity of the machine Large, Heavy Duty, Bale Spear with hydraulic Bale Release Pusher designed to carry 3 or 4 large square bales hydraulic pusher to release bales from tines top frame can be removed for handling bales in low buildings safety support to prevent bale fork from tipping when not in use. Folds up when not in use. 25 tine spacing 60 W x 54 H main frame dimensions 60 W x 79 H total frame with extension hydraulic hoses included quick couplers sold separately No Hydraulic Option Safety Stand Vertical Extension 4 www.martatch.com
GUIDE MANURE / STONE FORKS MANURE FORK 36 Conus I cranked tines at 8 centers 31 useable length from 42 to 108 widths available in skidsteer and loader profiles optional: 32 cranked tines with 26 useable length original kverneland tines RETAINER STYLE STONE FORK 40 useable length tines at 3 centers plasma cut for strength and durability points are reinforced with cross bar performs well in loose ground available from 54 to 108 REGULAR STYLE STONE FORK 39 Conus II cranked tines at 4 centers 32 useable length available from 54 to 108 widths see through back for better visibility original kverneland tines performs well in loose ground or pasture land Heavy Duty Pallet Fork Bale Spear Combo an economical choice with 2 tools in one attachment pallet fork tines easily remove without tools bale spear tines easily remove without tools safety frames easily remove without tools 48 bale spear tines 42 and 48 pallet fork tines pallet fork tines adjustable for width standard class II forklift forks Easy removal of safety frames. No tools needed! Forks, tines and safety frames are easily removed without tools. 1-800-698-5510 5
GRAPPLES PRODUCT Handling odd materials throws a challenging curve ball every time. With Martatch s grapple buckets and forks you won t be stumped when the worst comes along. From inside the cab you can scoop, dig, and grab materials such as large rocks, branches, debris etc. and move them to a different location within minutes. Neglected cleanup jobs will disappear in front of you while you operate a grapple without ever getting out of your seat! telehandler & wheel loader GRAPPLE opens to 72 - handy for large bails able to grab and move almost anything you can think of extra heavy duty construction with AR400 materal Handles the most rugged jobs BUCKET GRAPPLE handles it all: gravel, logs, garbage, large bales, manure, brush, cement - the list is endless 2 hydraulic grabbers work independently to hold uneven loads hardened cutting edge an all purpose tool, to turn your skidsteer into a multi-purpose machine without changing bits available from 48 to 96 STONE FORK GRAPPLE available from 60 to 108 useful for stones and heavy debris etc. can be fitted on any front end loader or skidsteer 39 conus II cranked tines 34 useable length at 4 centers original kverneland tines MANURE / UTILITY GRAPPLE available from 60 to 108 useful for large bales, manure, debris, logs, stones etc. can be fitted on any front end loader or skidsteer 36 conus I cranked tines 31 useable length at 8 centers Optional: 32 cranked tines, 26 useable at 8 centers original kverneland tines 6 www.martatch.com
GUIDE GRAPPLES PALLET FORK - single arm grapple excellent for laying landscape stones 7500 lbs. lifting capacity can be used for lifting skids PALLET FORK GRAPPLE excellent for logging and fence posts available with adjustable forks 42 to 60 long 7500 lbs. lifting capacity hydraulic clamping arms clamp independently to clamp uneven loads can be used for lifting skids Optional: fence unroller will adapt to the side of the grapple pallet forks shown is 37 tines 69 to 106 widths 5½ opening between tines 48 grapple opening heavy duty ¾ plasma cut material available in single or double grapple hoses included 27 tines grapple available DEBRIS GRAPPLE 37 27 tines 69 to 106 widths 5½ opening between tines 39 grapple opening heavy duty ¾ plasma cut material available in single or double grapple hoses included DEBRIS GRAPPLE 27 root rake grapple 48 to 80 widths plasma cut ½ AR400 high tensile teeth teeth spaced at 8 centers available in 30 height, single grapple available in 36 height, double grapple hoses included 1-800-698-5510 7
Pallet forks PRODUCT Pallet forks can make handling your skidded materials much easier and safer. Martatch offers you different options when you need to buy a pallet fork. This way you can get the perfect match to your loader or skidsteer, and the application, for the best cost. Contact us for more information on our pallet forks. Don t settle for less! heavy duty pallet fork / bale spear combo an economical choice with 2 tools in one attachment pallet fork, bale spear tines and safety frames easily remove without tools 48 bale spear tines 42 and 48 pallet fork tines pallet fork tines adjustable for width standard class II forklift forks 8 www.martatch.com
GUIDE Pallet forks 3700 lbs. capacity - 50 frame tines adjustable for width 36, 42, and 48 fork lengths standard class II forklift forks see through back plate for ease of pallet insertion at truck level anti-slip step 1¼ thick x 4 wide forks LIGHT DUTY PALLET FORK REGULAR DUTY PALLET FORK 5500 lbs. capacity - 50 frame tines adjustable for width 36, 42, and 48 fork lengths standard class II forklift forks see through back plate for ease of pallet insertion at truck level anti-slip step 1½ thick x 4 wide forks HEAVY DUTY FORK 7500 lbs. capacity - 46 frame tines adjustable for width 36, 42, and 48 fork lengths standard class II forklift forks see through back plate for ease of pallet insertion at truck level anti-slip step 1¾ thick x 4 wide forks 3-POINT HITCH PALLET FORK standard 3-point hitch mounts tines adjustable for width 36, 42, and 48 fork lengths standard class II forklift forks PALLET FORK extensions Pallet Fork Extensions available from 54 to 96 1-800-698-5510 9
logging equipment PRODUCT LOG GRAPPLE 40-80 hp and 80-100 hp models available grabs up to 30 logs chain swivel clamps on the main frame to keep grapple from swinging when driving over rough terrrain extra heavy duty construction front jaws to grab hanging trees to back drag grabs logs on one end for easy piling (shown above) Optional: hydraulic winch with 165 3/8 cable 8000 lb. pulling capacity at 25 gal/min and 2700 lb. pressure 15 metres/min line speed free spooling HYDRAULIC WINCH will handle any job from logging to dead stock removal hydraulic 8000 lbs. free spooling winch. 165 by 3/8 logging cable at 15 metres/min line speed 25 gal/min/2700 lbs. hydraulic pressure self anchoring plate brush removal blade 10 www.martatch.com
GUIDE logging equipment LIFT BOOM adjustable boom length pintle hook on end adjustable from 48 to 78 extended capacity 1500 lbs. ROTARY CUTTER available in 60, 72 and 84 for 30 to 100 hp high flow not needed lateral float & side shift adjustable side slides hardened cutting blades hydraulic motor 30 hp @ 20 gal/min with 40 hp gearbox can be fitted on any front end loader or skidsteer easily adjusts without tools for cutting along ditches, fences etc. safety chain guard Optional: available with front caster flail mower available in 60-96 widths high flow not needed vertical float hydraulic motor 30 hp - approx. 17 25 gallons / minute adjustable side sliders MARTATCH PRODUCTS ARE BUILT TO LAST! 1-800-698-5510 11
LANDSCAPING PRODUCT hydraulic arm ROTARY cutter designed for mowing on uneven terrain along roadsides and laneways, etc. available from 54-66 wide front castor is standard to ensure even travel on uneven terrain fertilizer spreader spreads fertilizer, salt, sand and seed front mount or 3 pt hitch mount hydraulic or PTO driven available from 100 L to 500 L capacity LOADER MOUNT SPRAYER Front mount or 3 pt hitch 10 fold away booms Hand gun sprayer 15-60 gallon tanks available Fold away booms up to 30 available Rototiller front mount or 3 pt hitch hydraulic or PTO driven 40 to 90 wide available 12 www.martatch.com
GUIDE LANDSCAPING TRAILER HITCH ADAPTER trailer hitch adapter for front end skid steer or loader move ball hitch trailers easily with your front end loader or skid steer 4 way variable size ball or hook hitch 3 PT HITCH ADAPTER Hookup to any 3 pt hitch equipment with skidsteer or tractor rotating hydraulic broom Angles both ways (manually with pin) Sweeps forward or reverse into bucket Dump swept-up debris by tripping bucket manually After dumping, bucket will latch into place when sitting on floor Uses hydraulic motor to spin broom excellent for snow cleanup, sweeping feed alley ways, outside yards does an excellent job without creating dust hydraulic adjustable angle HYDRAULIC ANGLE BROOM 1-800-698-5510 13
Snow Blades PRODUCT Snow removal with large tractors and blades is a growing market due to large parking lots needing to be cleared with minimal delay to businesses. Increase your efficiency and control with a Martatch hydraulic end wing blade, or one of our heavy duty snow pushers. Whatever the application, Martatch can suit you up with the best of both worlds. heavy duty hydraulic angle snow blades : spring trip cutting edge lateral float cross-over relief valve protection hydraulic angle 30 degrees both ways adjustable skid shoes reversible cutting edge for longer wear life AVAILABLE IN: 24 high - 60-96 wide - 30-50 hp 30 high - 72-108 wide - 30-80 hp 34 high - 108-168 wide c/w double cylinder - 60-120 hp 42 high - 144-192 wide c/w double cylinder - 90-200 hp extra heavy duty construction 14 www.martatch.com
GUIDE Snow Blades PURE CONVENIENCE! The true name of Martatch s compact tractor snowblades is - convenience. Now you don t have to spend your whole morning shoveling your driveway only to have it snow again later that day. With a Martatch snow blade on the front of your compact, you can have your s, and the neighbour s driveway clean before your coffee is done. Look no further! hydraulic angle COMPACT snow blades : spring trip mouldboard lateral float cross-over relief valve protection hydraulic angle 30 degrees both ways adjustable skid shoes reversible cutting edge for longer wear life AVAILABLE IN: 20 high mouldboard from 54 to 72 widths made to fit any loader for 20-35 hp. range available with undercarriage mount 1-800-698-5510 15
Snow pushers PRODUCT Martatch Snow-pushers are strictly designed for the contractor / farmer that needs the best solution for a bare-bones price. Snow-pushers are built with loader attachments specifically to your request or with a bucket attachment. You can convert your loader tractor or wheel loader to a snow removal machine in minutes for a low cost. Most buckets will simply slide into the sleeves at the back of the snow pushers while chains securely hold the pusher onto your bucket. This is definitely your best bet for a simple conversion where versatility is important. regular duty snow pushers : AR 400 material - replaceable skid shoes adjustable skid shoes spring trip cutting edge Optional: spring trip end plates lateral float AVAILABLE IN: 30 high - 96 wide - 30-50 hp 34 high - 120 wide - 40-90 hp 38 high - 168 wide - 80-120 hp made to fit any loader or bucket 16 www.martatch.com
GUIDE Snow pushers convert your loader tractor or wheel loader to a snow removal machine in minutes heavy duty snow pushers : AR 400 material - replaceable skid shoes adjustable skid shoes spring trip cutting edge Optional: spring trip end plates lateral float AVAILABLE IN: 42 high - 144-192 wide - 110-150 hp 48 high - 144-192 wide - 150-200 hp extra heavy duty construction designed for 150-200 hp wheel loaders made to fit any loader or bucket 1-800-698-5510 17
Snow blades PRODUCT The Martatch SNOW BRUTE snow pusher is a beefed up version of the Heavy Duty Snow Pusher for 150-200 HP machines. Built with heavier material and more strength, this is one serious contender in the snow pusher market. One seriously heavy duty snow pusher for serious snow pushers. SUPER HEAVY duty snow-pushers : AR 400 material - replaceable skid shoes adjustable skid shoes spring trip cutting edge Optional: spring trip end plates lateral float AVAILABLE IN: 42 high - 144-192 wide - 110-150 hp 48 high - 144-192 wide - 150-200 hp extra heavy duty construction designed for 150-200 hp wheel loaders made to fit any loader or bucket 18 www.martatch.com
GUIDE Snow blades Martatch Hydraulic End Wing Snowblades give you a significant edge over any other conventional blade. From the cab you can windrow the snow, then with the touch of a button you can setup your blade as a box blade to push it to the far end of the lot. Even tight corners aren t an issue with this capable blade. Just swing the wings back and backdragging becomes easy and efficient. When hard-to-get-at spots are all over your lot, don t settle for anything less. hydraulic end wing snow blades : blade wings hydraulically extend from 0-180 degrees spring trip cutting edge lateral float cross-over relief valve protection on all 4 cylinders hydraulic angle 30 degrees both ways adjustable skid shoes reversible cutting edge for longer wear life round pipe bullnose edge on wings to protect tires AVAILABLE IN: 30 high - 72-105 wide - 55-85 hp 34 high - 96-168 wide - 80-155 hp wings are 30 deep extended wings add a maximum of 60 to main mouldboard width When hard-to-get-at spots are all over your lot, don t settle for anything less 1-800-698-5510 19
NEW STYLE SNOW PUSHER WITH BACK DRAG Available in: 30 high, 120 wide (30-50 hp) 34 high, 144 wide (40-90 hp) 38 high, 168 wide (70-120 hp) : Available with Steel or Rubber cutting edge for back drag A must have for putlling snow away from doors, buildings or loading docks Spring trip cutting edge AR400 Adjustable shoes take a bite out of old man winter! 20 1-800-698-5510
Buckets - Page 3 Angle Broom - Page 13 Hydraulic Winch - Page 11 Bale Spears - Page 4 Stone Forks - Page 6 Snow Blade - Page 14 Palette Forks - Page 9 Snow Pusher - Page 16 Custom made attachments to fit any loader or skid steer. 1-800-698-5510
LOADER ATTACHMENTS SKIDSTEER ATTACHMENTS SNOW BLADES Available At: 4350 Hessen Strasse, RR #3, Wellesley, ON N0B 2T0 Canada Phone: 519-699-4668 Fax: 519-699-5416 1-800-698-5510 Email: sales@martatch.com Website: www.martatch.com