Lift Truck Attachments
Mounted Sweeper - The Basil The fork mounted sweeper is a quick and easy solution for reheaping your loose granule products such as sand, top soil, grain or similar. Optional left and right hand sweep gives you the versatility of clearing your yard, roadway footpaths or warehouse. n Interchangeable blue nylon brushes. n Facility to hang to fork mounted magnet from the frame. n Zinc plated twist screws for safe attachment to truck. n Left and right hand sweep bracket. Brush width No of Brushes 51195979 1500 8 150 x 60 683 51195982 1800 8 150 x 60 683 51195983 2450 8 150 x 60 683 Mounted Magnet A simple but effective method of clearing factory floors, car parks and goods yards of unwanted steel debris that could otherwise present a hazzard to pneumatic tyres and operatives alike. n Polished stainless steel finish. n Facility to hang from the fork mounted sweeper. n Zinc plated twist screws for safe attachment to truck. Width 51195984 1200 150 x 60 683
Multi Purpose Scoop Multipurpose Scoops are an ideal alternative to a loading shovel allowing your forklift to become a more universal asset. Ideal for the movement of loading of loose materials such as sand, gravel, top soil or similar. n Secondary locking mechanism to prevent accidental discharge. n Removable toothed leading edge to cut into product and protect scoop lip. n Operating mechanism fully enclosed to prevent against impact. n Zinc plated twist screws for safe attachment to truck. Nominal (m2) (kg) centres Bucket Size Length Width Height 51195986 0.25 300 150 x 60 683 900 860 500 51195989 0.50 600 150 x 60 683 900 1300 500 Extensions extensions provide a simple, but effective method of handling the occasional long and awkward load that extends past the tips of the parent fork arm. (maximum overhang is 50%) n Tip thickness 6mm for ease of splitting packs. n Fully pressed profile with rounded corners. n Zinc plated heel pins for safe attachment to truck. n Painted black. n Triangular or conical extensions for lifting paper rolls. Please call our parts direct department on 0800 634 0203
Combi Skip Designed to simplify the holding, movement and disposal of material in confined areas with the unique 4 way entry base. The skip is supplied as manual operation as standard, but automatic tipping at high level can be achieved by ordering the forklift driver to empty the skip without leaving the safety of his seat. n Low loading height. n Reinforce leading edge and body sides. n 4 way fork pocket entry. n Secondary locking mechanism to prevent accidental discharge. n Fully seam welded for retention of fluids. n Manual handle override n Zinc plated heel pins for safe attachment to truck n Conversion kit for automatic operation. n 125mm diameter nylon castors n Colour finish for waste separation/department. Nominal capacity (m2) (Kg) Max forks Body size Width centres length Height 51196573 0.9 750 150 x 50 675 1600 1060 830* 51196575 1.2 960 150 x 50 675 1600 1300 830* 51196577 1.5 1100 150 x 50 675 1600 1560 830* * Add 205mm to height to give overall skip height. Bottom Empty Skip Automatic bottom empty skips allow the simple but effective disposal of light to medium weight waste when being automatically emptied into high sided yard skips via the base release mechanism, without the driver leaving the safety of his seat. Nominal capacity (m2) (Kg) n 125mm diameter nylon castors n Internally reinforced sides and lap welded corners. n Unique automatic releasing and locking mechanism n Zinc plated heal pins for safe attachment to truck. n Colour finish for waste separation/department. centres length Body Width Body Height 51196578 0.80 550 150 x 50 683 850 1050 900* 51196579 1.20 750 150 x 50 683 1050 1200 900* 51196581 1.45 950 150 x 50 683 1050 1500 900* * Add 270mm to height to give overall skip height.
Automatic Low Level Skip The skip can be easily positioned at the end of a conveyor, dross shoot or manufacturing line to collect bi-products that are below waste level. Invicta's unique automatic tipping mechanism enables the forklift driver to tip the skip at high level without leaving the safety of his seat, with the added benefit of a manual handle for low level tipping. n Low loading height n 4 Way fork pocket entry n Reinforces leading edge and body sides. n Secondary Locking Mechanism to prevent accidental discharge n Manual handle override n Zinc plated twist screws for safe attachment to truck n Fully seam welded for retention of fluids n 125mm diameter nylon castors. n Colour finish for waste separation/department. Nominal capacity (m2) (Kg) Max forks centres Body Size Length Width Height 51196582 0.7 300 150 x 60 683 1380 910 540* 51196584 1.0 600 150 x 60 683 1380 1300 540* * Add 160mm to height to give overall skip height. Low Profile Jib When height is at a premium the Low Profile Jib allows the movement of long and awkward loads from inaccessible locations, with the potential of 5 different lifting centres. n Multi hook positioning from 500-1750 load centres n Supplied complete with 2 No swivel hooks and bow shackle n Four way pocket entry for ease of storage n Zinc plated heel pins for safe attachment to truck (kg) @ Centres 500mm 1000mm 1250mm 1500mm 1750mm Max Centres 51195990 1000 700 500 400 250 150 x 50 281 51195991 1500 1100 900 650 450 150 x 50 281 51196004 2000 1600 1200 900 600 150 x 50 281 51196005 3000 2100 1600 1100 850 150 x 50 281 51196006 4000 3200 2500 1900 1100 150 x 50 281
Carriage Mounted Poles Suitable for a variety of applications when the lifting and repositioning of a coiled product is required such as fabric, carpets, paper rolls, lining. Fitted directly onto the carriage of the forklift, thus maintaining the truck optimum lifting capacity. n High tensile machined pole with tapered tip to ease location into coiled product n Smooth surface finish to protect the intended load to be lifted n Quick release bottom hangers supplied as standard. Model ITA/FEM class Boom dia Length (kg) Load centre 51196587 2A 70 3000 500 2000 51196588 2A 75 3000 600 2000 51196589 3A 75 3000 600 2000 51196591 2B 70 3900 500 2500 51196592 2A 70 2000 500 1000 51196593 2A 70 1600 500 800 51196594 2A 70 3700 500 2500 51196595 2A 75 1600 500 800 51196596 2A 75 3700 600 2500 Mounted Poles As with the Carriage Mounted Pole the Mounted Pole is capable of lifting a variety of coiled products, but is usually used in a low volume/occasion usage environment with a mixed pallet/coiled product application. n High tensile machined pole with tapered tip to ease location into coiled product n Free standing for ease 0f location n Smooth surface finish to protect the intended load to be lifted n Zinc plated heel pins for safe attachment to truck boom dia Effective length (kg) Load centre Max forks centres 51196597 70 3000 500 2000 125 x 50 230 51196599 75 3000 750 2000 125 x 50 230 51196600 75 3000 750 2500 125 x 50 230
Mounted Drum Lifter The fork mounted drum lifter provides a simple yet effective method of moving steel drums in a safe and controlled manner which is aimed at the small to medium volume drum user. n Fully automatic without the driver leaving the safety of his seat n Minimum moving parts for low maintenance n Zinc plated twist screws for safe attachment to truck (kg) No of Drums 51196601 500 1 125 x 50 408 51196602 1000 2 125 x 50 408 Mounted/Crane Slung Drum Tiler Regardless of access the fork Mounted or Crane Slung Drum Tilter allows the safe discharge from steel and plastic drums with minimal ease within any confined space, with the option of crank handle or looped chain for low or high level controlled discharge. n Robust gearbox allowing drum to be locked and held at any angle n Three point mechanical restraints to prevent drum slippage n 50mm wide webbing strap with ratchet restraint n Zinc Plated heel pins for safe attachment to truck (fork mounted only) n Plastic drum adaptor n mounted frame (crane slung model only) Mounting type (kg) Type of control 51196008 360 125 x 50 801 Crank handle 51196013 360 125 x 50 801 Looped chain 51196606 Crane slung 360 125 x 50 801 Crank handle 51196609 Crane slung 360 125 x 50 801 Looped chain
Mounted Rim Grip The fully automatic rim grip is versatile and efficient for the movement of a wide variety of steel and plastic drums that are either open or closed toped.the hardened steel jaws lift from the rim of the drum thus allowing the safe movement of both new and damaged drums. n Fully automatic without the driver leaving the safety of his seat n Ideal for transporting over rough ground n Zinc plated twist screws for safe attachment to truck n Rubber pads to drum hoop to limit damage to drum n Stainless steel for zoned areas (kg) No of Drums 51196613 750 1 125 x 50 412 51196614 1500 2 125 x 50 412 Battery Lifting Beam Battery Lifting Beams are specifically designed for the removal of battery boxes from forklifts safely. Supplied as standard fork mounted, but can be manufactured with a lifting eye for an overhead crane. n Supplied with 4 single drop chains with hook n Six lifting points supplied as standard n Zinc plated twist screws for safe attachment to truck (kg) Lifting point centres 51196617 1000 1200 x 570 (outer) 125 x 50 340 51196618 2000 1200 x 570 (outer) 125 x 50 340
Snow Plough Although potentially a seasonal attachment the fork mounted Snow Plough is invaluable when the clearing of freshly fallen or compacted snow is required to ease vehicle or pedestrian access i.e. car parks, access roads and service yards. Often used by our customers as yard scrapers out of the wintery months. n Fixed left hand sweep angle - 15 degrees n Bolt on steel wear strip n Stand skids to ensure level scrapping n Zinc plated twist screws for safe attachment to truck n Galvanised finish n Bolt on rubber wearstrip Blade width 51196105 1250 150 x 50 683 51196108 1500 150 x 50 683 51196110 1800 150 x 50 683 Towable Mini Gritter The mini towable gritter hooks onto the towing eye of a counterbalance fork lift truck and spreads salt grit via a worm drive, driven by the axle wheels. Standard Features n Flow of grit regulated to ensure economical usage n Agitator mounted in the base of hooper to minimise blockages. n Majority of parts either galvanised or stainless steel to prevent corrosion. n Painted finish - non corrosive n Large pneumatic tyres (litres) 51196112 170 NB: The methods presented in this document are solely for the use of [brand/name of product] and are intended for guidance only. When familiarity has been gained with the equipment preferred methods may be adopted, provided they do not contravene health and safety legislation or approved safe working practices, particularly HSE Guidance Note PM28. The information is correct at time of publication, but Jungheinrich UK Ltd reserves the right to change, without prior notice, the specifications and methods mentioned. No responsibility whatsoever can be accepted for any errors or omissions in, or misrepresentation of, the contents. For further information please refer to Jungheinrich UK Ltd.
Jungheinrich trucks conform to the European Safety requirements Jungheinrich UK Ltd Sherbourne House Sherbourne Drive Tilbrook Milton Keynes MK7 8HX Telephone 01908 363100 Fax 01908 360180 info@jungheinrich.co.uk www.jungheinrich.co.uk 06/13