Always finding new solutions. modulesolutions.no
modulesolutions.no we can work it out Contents The company 3 Our driving force 4 Our solutions 5 Our capabilities 6 Our areas of expertise 8 Modules 9 Rental solutions 10 Passive fire & blast protection 11 FRP Composite grating 12 Access solutions 13 Quality & HSE. References 14 References 15 Module Solutions & Systems is an innovative provider of weight-saving modules, access solutions and passive fire & blast protection, to the oil and gas industry, including the renewable energy sector. The company 3
Finding the right solution is our driving force. Test module for PZV valves. Our driving force. MSS was established in Stavanger in 2001. Our senior employees have more than 25 years of experience within the oil and gas industry, covering areas such as project management, supply-chain management, architectural design, multidiscipline engineering, fabrication and installation. Finding the right solution is our driving force. All our business is based on the following values: being open, being trustworthy and building long-term relationships. Your requirements are special. We ll give you the perfect solution. MSS has specialised expertise in the design and fabrication of modules and in lightweight solutions made of composites, and we deliver complete EPCI projects. Our solutions and systems are future-oriented, environmentally friendly, tailor-made to suit our clients needs and based on the best technology available. One of our major assets is our ability to customise our solutions to the individual needs of our clients. Kjetil Jacobsen managing director Our driving force 4 Our solutions 5
Module insulation work almost complete. HVAC system on module roof top. Our capabilities. MSS provides engineering services for both modules and composite materials, from studies to complete solutions. The service can be provided in-house or at the clients premises. Over the years MSS has developed a core expertise in developing lightweight modules for existing platforms where space is limited. These projects are mainly turnkey in nature, including preparation of the footprint and final commissioning. Weight limitations are becoming a major problem on existing platforms when more equipment is required to support the operation. MSS carries out studies on existing structures on the feasibility of replacing steel with composite materials, which in some cases can reduce weight by up to 60 per cent and as a result increase the possible payload. Through our network of partners we have access to all the necessary disciplines to undertake full EPCI responsibility. The project teams are tailored to suit the project needs, with skilled personnel for all project phases. MSS is a unique centre of expertise, based on knowledge, experience and skilful employees. Morten Alstadsæther business development director Our range of capabilities: Offshore Surveys Studies Engineering Consultancy EPCI MSS s contribution Market needs Standardisation Best practice Building methods Client a catalyst to improved solutions Partners MSS s contribution Input in the early phase to reduce overall project cost: Layout and design Materials Budget cost Delivery time General requirements Surveys Interface Life-cycle cost Installation methods User-friendliness Our capabilities 6 Our range of capabilities 7
Our areas of expertise. Weight-saving modules also for rental: accommodation modules, workshops, warehouses, laboratories, co-ordination centres and restrooms Passive fire & blast protection in composites Grating, handrails and structures in phenolic FRP composite Our goal is to be the leading company in Norway within our core business area. Some would say we re already there. Modules with a focus on weight reduction. MSS has specialised in small and medium-sized projects. We deliver module solutions as single-lift, modular sections or flat-packed as prefabricated elements for all types of applications. The modules are available in steel, stainless steel and aluminium. The main focus is on weight reduction, due to the cost impact weight has on transportation, installation and support structures. Typical applications: Living quarters Offices Workshops Warehouses Laboratories Zone 1 & 2 modules Coordination centres Rest rooms Gymnasiums Our areas of expertise 8 Modules 9
Rental modules for a safe and comfortable workspace or living area. Well servicing Office Welding Hot work Accommodation MSS unitsoffers a variety of modules A60 accommodation modules and workspace modules modules for different applications. modules The modules are designed according to DNV 2.7-1, having ISO corners for fast and easy hook-up, and are built to the latest specifications. The modules can be customised to suit your requirements. Solutions portfolio Passive fire & blast protection for hazardous areas. MSS is Solent Composite Systems (SCS) strategic alliance partner in Norway. Solent Composite Systems has an unrivalled track record in the design and manufacture of ProTek jet fire and blast protection systems, which have been adopted for a wide variety of demanding applications in the offshore oil and gas sector protecting critical assets and personnel in hazardous areas including: ESDV/Actuator protection Fire and Blast walls and doors Riser hang-off PFP Marine fire partitions TSR s, escape-ways and refuge areas Splash zone riser protection Offshore modules Office modules Welding modules Hot work modules Solutions portfolio Accommodation modules The ProTek system comprises composite multi-layer structural panels mounted on a corrosion-resistant steel frame, providing an extremely lightweight rigid structure capable of managing severe blast and wind loads. The versatile modular design permits rapid on-site assembly to accommodate pipes, tubes, cables and other penetrations, even in very congested areas. Rental solutions 10 Passive fire & blast protection 11
DURAGRID pultruded bar grating meets the specific open-space requirements of NORSOK. FRP Composite grating accommodating all your needs. MSS is the largest supplier of composite grating to projects on the Norwegian Continental Shelf, representing Strongwell Inc. in Norway. We have supplied more than 60 000 sqm of FRP (fiber reinforced polymer) Pultruded Grating to both greenfield and brownfield projects. MSS are offering a high service level with respect to both high expertise within composites and delivery of grating from stock from our warehouse, to accomodate your needs. The main product is DURAGRID Phenolic Grating manufactured by Strongwell with the following main advantages; High strength Low maintenance Fire integrity Superior anti-slip surface Light weight Patented profile locking system Corrosion resistance Good working comfort High impact resistance Access solutions unique, weight-saving and advanced FRP composite products. MSS is Pipex px strategic alliance partner in Norway. Pipex px engineer and manufacture advanced composite (FRP/GRP) structures and systems for both Offshore topside and Subsea markets. The FRP Phenolic (topside) and FRP (fibre reinforced polymer) products are ideal for extreme environments offering high corrosion resistance, structural integrity and requiring minimal maintenance. FRP is also very light weight so offers huge benefits on Topside applications where overall load, balance and platform centre of gravity are so critical. For Offshore Topsides we can provide you with: MARRS Offshore Handrails, Ladders & Safety Gates Access Structures, Platforms & Hop Up s For Subsea we can provide you with: Cocoon & Shroud (protective subsea structure) Impact Protection Panels Subsea bridges Cable Protection Systems (thermoplastic HDPE high visibly yellow) You may also have a requirement for bespoke products/solutions and we offer engineering services, design and specialist manufacturing for custom made projects. Composite grating 12 Access solutions 13
Quality & HSE MSS has an implemented and documented QHSE system in accordance with NS-EN ISO 9001:2008. Our management processes provide for: Continuous Improvements, Customer Satisfaction, Key Performance Indicators (KPI), Revisions and Management Review. MSS is using a web-based management system that allows our employees quickly and easily to access and contribute to our organisation s documentation from any location where Internet access is available. All our processes and procedures required for the planning and safe execution of our business are defined and available through the management system. References FRP Composite grating Client Installation Period Description Norsk Hydro Grane 2003 5000 sqm of 38 mm FRP Grating Aibel Ekofisk 2004-2008 3800 sqm of 38 mm FRP Grating Aibel Visund 2006 900 sqm of 38 mm FRP Grating ConocoPhillips Ekofisk/Eldfisk 2004-2008 2400 sqm of 38 mm FRP Grating Aibel Statfjord B/C 2006-2007 1650 sqm of 38 mm FRP Grating Statoil Statfjord A/B/C 2006-2007 1350 sqm of 38 mm FRP Grating Aker Kvaerner Aker Barents 2007-2008 2500 sqm of 38 mm FRP Grating Aker Kvaerner Aker Spitsbergen 2007-2008 2500 sqm of 38 mm FRP Grating Aker Stord Gjøa 2008-2009 5400 sqm of 38 and 45 mm FRP Grating Aibel Gudrun 2011 1500 sqm of 38 and 45mm FRP Grating SMOE Ekofisk 2/4-L 2011-2013 38mm FRP Grating and Accessories Kværner Eldfisk 2/7-S 2012-2013 45mm FRP Grating and Accessories Kværner Edvard Grieg 2013 45mm FRP Grating and Accessories Other reference projects: Draupner, Frigg, Heidrun, Huldra, Island Innovator, Kårstø, Morvin, Oseberg, Polar Pioneer, Skarv, Schahin Drillship No.1, Tyrihans, Valhall, Transocean Searcher, Songa Dee, Snorre, Deep Sea Atlantic and Åsgard. References Modules Client Installation Period Description Siem Offshore MS Siem Mollie 2007 Cold Storage Module Møkster Shipping MS Stril Møkster 2007 Accomomdation Module Fabricom Gullfaks C 2007 Transformer Module (Flat Package) Seadrill West Epsilon 2007-2008 Coordination Centre Aker Reinertsen Norne 2007-2008 8 man Living Quarter Extension StatoilHydro Njord A 2008 Restroom for Drilling Personnel StatoilHydro Njord A 2008 Office Module Aibel Ekofisk 2/4-J 2008 Office Module Aker Solutions Gjøa 2008 Paint Shop & Waste Container Unit Schlumberger Oseberg 2008 Office Module Seawell Gyda 2008 Hotwork Module Aibel Ekofisk 2/4-J 2008-2009 Sanitary Module Aibel Njord A 2009 7 man Office Module Aibel Oseberg C 2009 Mud System Operators Cabin Aker Solutions Draugen 2009-2010 Paint Shop Module KCA DEUTAG Oseberg East 2010 Environmental Cabin Module Aker Reinertsen Åsgard A 2010-2011 Paint Shop Modules KCA DEUTAG Kvitebjørn 2010-2011 Storage Unit for Heavy Equipment Aker Solutions Visund 2010-2011 Test Module for PZV Valves Aker Solutions Gullfaks B 2010-2011 Freezer Room Module Albatross Services Songa Dee 2011 Gymnasium & Heliwait Module Aker Solutions Gullfaks C 2011-2012 Wireline Tool Module Archer Veslefrikk A 2011-2012 Workshop Module Dolphin Drilling Bredford Dolphin 2011-2012 Office & Gymnasium Modules Dolphin Drilling Bredford Dolphin 2012 LER-room Module Aker Solutions Eldfisk 2/7-E 2012 Office Module Aibel Ekofisk 2/4-X 2012-2013 Office & Collaboration Room Module Aibel Oseberg East 2012 Restroom for Drilling Personnel Aibel Haven 2012 Storage Containers (4 ea) Aibel Ekofisk B11 2012-2013 Containers for Nav. Aid Equipment (2 ea) Aibel Ekofisk 2/4-M 2012-2013 Storage Container (Flat Package) Odfjell Drilling Island Innovator 2013 Heavy Tool Storage Container Fabricom Sleipner A 2013 Workshop Modules Study and refurbishment Client Installation Period Description Aker Reinertsen Norne 2007-2008 Refurbishment of sky lobby and offices Aibel Ekofisk 2/4-J 2008 Study assistance new office module Aibel Ekofisk 2/4-J 2008 Study assistance new sanitary module Aibel Eldfisk 2/7-B 2008 Study assistance rebuilding of warehouse Aibel Ekofisk 2/4-X 2008-2009 Study assistance new office and coordination centre Aibel Eldfisk 2/7- FTP 2008 Study assistance new paint shop module Aibel Eldfisk 2/7-A 2008 Study assistance new paint shop module Aibel Eldfisk 2/7-B 2008 Study assistance new paint shop module Aibel Ekofisk 2/4-E 2008 Study assistance new paint shop module Aibel Ekofisk 2/4-K 2008 Study assistance new office modules Aibel Eldfisk 2/7-E 2008 Study assistance new tool container Aker Solutions Gullfaks C 2009-2010 Study assistance new paint shop module Aker Solutions Visund 2011 Study Module consept for 3 new modules Aker Solutions Valhall 2011 Study Prelim. Module Concept Design Aker Solutions Visund 2011-2012 Study Module concept for 3 new modules Phase II Aker Solutions Grane/Svalin 2011 Study Verification of new LQ Aker Solutions Gudrun 2011-2012 Study Weather Protection of FW Pumps (Composite) Complete reference lists are available at www.modulesolutions.no/references we can work it out Quality & HSE. References 14 References 15
AD. MOMENT Foto: F. Ringe / Tom Haga Finding the right solution has been our driving force since 2001. MSS provides future-oriented, environmentally friendly and weight-saving modules, access solutions, passive fire & blast protection and well servicing rental units to the oil and gas industry. We have specialised expertise in the design and fabrication of all types of modules and in walkways and access solutions made of composites. MSS is co-owner of the companies Albatross Services and Albatross Electro & HVAC. The company group provides complete EPCI projects within the disciplines of mechanical, structural, piping, HVAC, refrigeration and electro, in addition to the repair and upgrade of drilling equipment. At present, the group employs more than 120 people at its locations in Stavanger, Bergen and Kristiansund. Font: Neo Tech Alt CMYK: C100 M57 Y0 K40 35% Module Solutions & Systems AS Skvadronvegen 22 NO-4050 Sola Tel. +47 51 71 69 20 www.modulesolutions.no