PCSAU0773D 30 airflow!! AIR CONDITIONING SYSTEM HEAT PUMP [0Hz]
HFC R-40A Line Up for Stores and Offices. CEILING MOUNTED CASSETTE TYPE CEILING SUSPENDED TYPE PRODUCT RANGE Series 0 0 7 CEILING MOUNTED CASSETTE TYPE Round Flow Indoor unit Outdoor unit FCQ0KVEA RZQ0KBV4A FCQ0KVEA RZQ0KBV4A FCQ7KVEA RZQ7KCV4A CEILING SUSPENDED TYPE Indoor unit Outdoor unit FHQ7BVVB RZQ7KCV4A WALL MOUNTED TYPE NEW Indoor unit Outdoor unit FAQ7CVEA RZQ7KCV4A Controllers Specifications Options Dimensions Page - Page 20-2 Page 22-23 Page 24-28 RZQ0KBV4A RZQ0KBV4A OUTDOOR UNIT RZQ7KCV4A
WALL MOUNTED TYPE OUTDOOR UNIT 00 2 40 Page FCQ00KVEA FCQ2KVEA FCQ40KVEA RZQ00KCV4A RZQ00HAY4A RZQ2KCV4A RZQ2HAY4A RZQ40KCV4A RZQ40HAY4A NEW Page 9 FHQ00BVVB FHQ2BVVB RZQ00KCV4A RZQ00HAY4A RZQ2KCV4A RZQ2HAY4A RZQ40KCV4A FHQ40CAVEA RZQ40HAY4A NEW Page RZQ00KCV4A FAQ00CVEA RZQ00HAY4A Page 3 RZQ00KCV4A RZQ00HAY4A RZQ2KCV4A RZQ2HAY4A RZQ40KCV4A RZQ40HAY4A OUTDOOR UNIT 2
Features and Benefits of DAIKIN's Round Flow cassette Comfortable airflow 30 airflow with improved temperature distribution. 4-way flow type Round Flow type 4-way flow leaves areas that cannot be covered. 30 airflow realises uniform airflow distribution. Comfortable Enhanced comfort with Inverter Inverter performs variable control of frequency, which determines air conditioner s power performance. At startup, full power is used to achieve the set temperature quickly. Then, the capacity is adjusted according to the outdoor temperature changes and subtle indoor load changes to achieve fine capacity control resulting in a more stable room temperature. Non-inverter type air conditioners must be switched on and off repeatedly, causing large fluctuations of the room temperature. Cooling operation Temp Set temp Soft starter is unnecessary, making electrical installation work much simpler. Current Current Non-inverter Running current Inverter Starting current Time Running current Cools a room in less time Small temp. difference Time Inverter power control Non-inverter type air conditioner Time At startup, inverter raises frequency smoothly, eliminating the starting current spike. Compact Compact and lightweight Height(mm) Width(mm) 0 / 0KB, 7KC 770 00 / 2 / 40KC,70 900 00 / 2 / 40HA,34,70 mm Depth(mm) 320 Weight(kg) 8 98 08 RZQ00KC-40KC 3
SkyAir Range "Nav Ease" Wired Remote Controller Clear Display Dot matrix display Backlight display Simple operation Large buttons and arrow keys Guide on display NEW Energy saving NEW NEW Setpoint range set Setpoint auto reset Off timer (programmed) Convenience Weekly schedule Multilingual display Wired Remote Controller BRCE2 Energy Efficient Complies with MEPS COP 4 3 2 3.94 4.2 4.02 3.84 Cooling Heating 2 Cooling Heating 2 FCQ0KVEA FCQ0KVEA RZQ0KBV4A RZQ0KBV4A 3.8 3.7 3.70 3.40 3. 3. 3.00 3.33 Cooling Heating 2 Cooling Heating 2 Cooling Heating 2 Cooling Heating 2 FCQ7KVEA FCQ00KVEA FCQ2KVEA FCQ40KVEA RZQ7KCV4A RZQ00KCV4A RZQ2KCV4A RZQ40KCV4A What is COP (Coefficient of Performance) COP is equal to capacity (kw) divided by power consumption (kw), and the larger the COP value, the higher the energy efficiency, enabling cooling and heating with less electricity and increasing the energy saving performance. Note : Rated cooling capacities are based on the following conditions: Indoor temp., 27 CDB, 9.0 CWB; outdoor temp. 3 CDB, 24.0 CWB. Equiv. refrigeration piping, 7. m (horizontal). 2 Rated heating capacities are based on the following conditions: Indoor temp., 20 CDB, outdoor temp., 7 CDB, CWB. Equiv. refrigeration piping, 7. m (horizontal) Quiet operation Night quiet operation function The Automatic night quiet mode will initiate 8 hours after the peak temperature is reached in the daytime, and normal operation will resume 0 hours after that. Reducing noise will reduce capacity slightly. RZQ0/0KB RZQ7KC RZQ00KC/00HA RZQ2KC/2HA RZQ40KC/40HA Sound level 3 (db(a)) Rated 4 Night Quiet Mode 48 48 44 49 4 0 4 0 4 Note : 3 Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions. 4 Value when cooling. Value will differ when heating. 4
CEILING MOUNTED CASSETTE TYPE Round Flow Uniform 30 airflow cassette air conditioner is setting tomorrow's standards. Heat pump FCQ0K/0K/7K/00K/2K/40K Accessory required for indoor unit Wired LCD remote controller "Nav Ease" BRCE2 Note: Remote controller cable not included. Cables must be procured locally. Option Wireless LCD remote controller A signal receiver must be added to the indoor unit. BRC7F32F Signal receiver unit (Installed type) Wireless remote controller and signal receiver unit are sold as a set. Features Comfort Remote controller Cleanliness Work & Servicing Control features Options Others Auto swing Swing pattern selection Draft prevention function (heating) Switchable fan speed (2 step) Programme "Dry" High ceiling application Two selectable temperature-sensors Hot start (after defrost) Year-round cooling applicable * * * * * *2 *2 * Applicable when wired remote controller is used * 2 For the outdoor units Night quiet operation Setpoint auto reset Setpoint range set Weekly schedule timer Off timer (programmed) Anti-bacterial air filter Silver ion anti-bacterial drain pan Drain pump mechanism Pre charged for up to 30 m Filter sign Ceiling soiling prevention Low gas pressure detection Emergency operation *2 *2 Self-diagnosis function Auto-restart Auto-cooling/heating change-over Control by 2 remote controllers Group control by remote controller External command control Central remote control Interlock control DIII-NET communication standard High-efficiency filter Fresh air intake kit Anti corrosion treated heat exchangers
Avoids uneven temperature and discomfort caused by drafts. Comfort enhanced by Round Flow! 30 airflow Air movement is gentle with Round Flow With uniform temperature distribution Greater comfort Airflow distribution creates uniform comfort throughout the space Enhanced Comfort Adapts easily to the installation space. As air flows out from corner outlets, comfort spreads more evenly. Typical flow patterns There are a total of 23 flow patterns. 30 airflow can maintain comfort even if air discharge speed is lower. If you raise the set temperature by to. C in cooling (and lower in heating), and velocity is decreased by 2%, you still obtain the same feeling temperature and comfort. All-round flow 3-way flow L-shaped 2-way flow Opposite 2-way flow (E.g., installed in middle of ceiling) 4-way flow also possible. (E.g., installed near a wall) (E.g., installed in a corner) (E.g., installed in a long room) Note: Whatever the discharge direction, the same type of panel is used. If installing for other than all-round flow, an air discharge outlet sealing material (option) must be used to close each unused outlet. Operation sound increases when using 2-way or 3-way flow. Grime prevention and bactericidal coating: Makes cleaning easier. External panels are treated with a coating that helps to repel dirt. To help prevent dirt sticking to the external panels, they have been coated with a surface treatment. Resists soiling Treated surface Untreated surface Grimy surface Condition after exposure to the smoke of 00 cigarettes in m 3 enclosed space. Silver ion anti-bacterial drain pan Mould-proof drain pan includes a silver ion antibacterial agent that assists in preventing the growth of slime, bacteria, and mould that cause smells and clogging. Non-flocking flaps Condensation does not easily form on and dirt does not cling to non-flocking flaps. It is easy to clean. Filter has anti-mould and bactericidal treatment Helps prevents mould and microorganisms growing out of the dust and moisture that adheres to the filters.
CEILING MOUNTED CASSETTE TYPE Round Flow Unified square panels Panel size is the same for all models, FCQ0-40K. It is easy to maintain a neat appearance when multiple units are installed in the same room. 90 mm 90 mm Same for all models Compact body and quiet operation Indoor unit High Low 0K 3 28 0K 3 28 7K 3 28 00K 43 32 2K 44 34 40K 44 3 db(a) Note : Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions. Optimal comfort and convenience assured by air discharge modes Note: Air direction is set to the standard position when the unit is shipped from the factory. The position can be changed from the remote controller. Air direction Desired situation Auto-swing -levels air direction setting Draft prevention (In heating mode) Auto air direction control Standard setting to prevent draft. Suitable for high ceilings Even in spaces with high ceilings, a comfortable airflow is carried down to the floor level. Criteria for ceiling height and number of air discharge outlets (Ceiling height is reference value) Number of air discharge outlets used 0K 7K 00K 40K Two selectable temperature-sensors Both indoor unit and wired remote controller (option (BRCE2) ) contain temperature- sensors. Temperature sensing can be set at the unit or, to further improve comfort level, closer to the target area at the wired remote control. This feature requires initial setting by the installer. *Temperature-sensor on indoor unit must be used when the air conditioner is controlled from another room. **Wireless remote controller does not have a temperature-sensor. Hot start (after defrost) Standard setting Setting to prevent soiling of ceiling * Auto-swing between and 0 Settable to different levels between and 0 *Closing of the corner discharge outlets is recommended. Ceiling height Standard High ceiling High ceiling All round 4-way 3-way 2-way flow flow flow flow 2.7 m 3. m 3.0 m 3. m 3.0 m 3.4 m 3.3 m 3.8 m 3. m 4.0 m 3. m - Recommended for shops with light coloured ceilings that must be kept spotless. Auto-swing between 2 and 0 Settable to different levels between 2 and 0 At heating startup and thermo OFF, air discharge is automatically set to a near horizontal 2 or 30 to prevent direct exposure to cool air drafts. All round 4-way 3-way 2-way flow flow flow flow 3.2 m 3.4 m 3. m 4.2 m 3. m 3.9 m 4.0 m 4.2 m 4.2 m 4. m 4.2 m - Note: Factory settings are for standard ceiling height and all-round flow. High ceiling settings () and (2) are set with the remote controller by field setting. Switchable fan speed: High/Low The air direction is set automatically to the memorised position of the previous air direction. Quick and easy to install Just 2 mm high. Installable in tight ceiling spaces (0K 7K) * 298 mm high with 00K 40K *2 308 mm high with 00K 40K Easy height adjustment 2 mm * 2 mm *2 Each corner of the unit has an Adjuster Pocket that lets you easily adjust the unit's suspended height. Note: If the wireless remote control option is installed, a light receptor unit is housed in one of the adjuster pockets. All models can be installed without using lifter because of the light weight. Can be installed in any direction Since the orientation of the intake grill can be adjusted after installing, the direction of the intake grill lines can be unified when multiple units are installed. Drain pump is equipped as standard accessory with 80 mm lift. 80 mm 7 mm Transparent drain socket Connection to a centralised control system is available, no need for option card. Low gas pressure detection 7
Easier to maintain The condition of the drain pan and drain water can be checked by removing the drain plug and intake grille. Drain plug Just open the intake grille! Options required for specific operating environments High-efficiency filter Available in two types: % and 90% colorimetry. Fresh air intake kit Using this kit, a duct can be fitted to increase the intake of outdoor air. Outside Note: *Connecting ducts, insect nets, fire dampers, air filters, and other parts should, as required, be procured locally. **Outside Air fan interlocked with air conditioning unit is necessary. Optional PCB(KRPC3)is required for interlocking. ***It is recommended that the volume of outdoor air introduced through the kit is limited to 0% of the maximum airflow rate of the indoor unit. Introducing higher quantities will increase the operating sound and may also influence temperature sending. Panel spacer Use when only minimal space is available between drop ceilings and ceiling slabs. Panel spacer 40mm Note: Some ceiling constructions may hinder installation. Contact your Daikin Dealer before installing your unit. Sealing material of air discharge outlet Sealing material block air discharge openings not used in 2-way or 3-way blow. Branch duct (direct-connection round duct) A round duct can be attached without the need for a chamber. A flanged port for direct connection of a round duct is provided. An existing branch duct chamber can also be fitted (square slit hole). The units can be installed in the following different ways. Chamber type (without T-joint pipe and fan) KDDPB0 Chamber type (with T-joint pipe and without fan) KDDPB0K Direct installation type KDDPX0 Flexible duct (procured locally) T-joint pipe (procured locally) Flexible duct T-joint pipe Suction chamber Connection chamber Intake duct (procured locally) (duct length: 4 m max.) Suction chamber Connection chamber Intake duct (procured locally) (duct length: 4 m max.) Duct flange (with insulation material) Intake duct (procured locally) Note: Use of options will increase operating sound. 8
CEILING SUSPENDED TYPE Comfortable airflow travels throughout the room Heat pump FHQ7BV / 00BV / 2BV / 40CA FHQ7BV NEW FHQ40CA Accessory required for indoor unit Wired Remote Controller Option "Nav Ease" BRCE2 Note: Remote controller cable not included. Cables must be procured locally. Wireless LCD remote controller A signal receiver must be added to the indoor unit. 7/00/2BV 40CA 7/00/2BV BRC7EA3W BRC7GA3 40CA Signal receiver unit (Installed type) Wireless remote controller and signal receiver unit are sold as a set. Features Comfort Remote controller Cleanliness Work & Servicing Control features Options Others Auto swing Draft prevention function (heating) Switchable fan speed Programme "Dry" High ceiling application Two selectable temperature-sensors * *2 *3 *4 *3 *3 *3 *3 * *4 *4 * * *4 * FHQ7-2BV: 2 step, FHQ40CA: 3 step * 2 Installable on max. 3. m (7-2BV), 4.3 m (40CA) high ceiling * 3 Applicable when wired remote controller is used * 4 For the outdoor units * Option * FHQ40CA only Hot start (after defrost) Year-round cooling applicable Night quiet operation Setpoint auto reset Setpoint range set Weekly schedule timer Off timer (programmed) Anti-bacterial air filter Drain pump mechanism Pre charged for up to 30 m Filter sign Low gas pressure detection Emergency operation Self-diagnosis function Auto-restart Auto-cooling/heating change-over Control by 2 remote controllers Group control by remote controller External command control Central remote control Interlock control DIII-NET communication standard Fresh air intake kit Anti corrosion treated heat exchangers 9
New 40 model provides greater capacity for large spaces The technology of the DC fan motor, wide sirocco fan, and large heat exchanger combine for greater airflow and quiet operation. High/Middle/Low : 4/42/38 db(a) Sophisticated design Flap neatly closes when not in use. Fresh white colour. Installable on ceilings 4.3 m high 3 fan speeds: High/Middle/Low Connection to a centralised control system is available, no need for option card. Drain pump kit (option) includes a silver ion antibacterial agent that assists in preventing the growth of slime, bacteria, and mould that cause smells and clogging. Comfortable Auto swing (up and down) and louvers (left and right by hand) bring comfort to the room Louver manually adjusts for straight or wide angle airflow Installable on ceilings 3. m high (FHQ7-2BV) Two selectable temperature-sensors Both indoor unit and wired remote controller (option (BRCE2) ) contain temperature- sensors. Temperature sensing can be set at the unit or, to further improve comfort level, closer to the target area at the wired remote control. This feature requires initial setting by the installer. *Temperature-sensor on indoor unit must be used when the air conditioner is controlled from another room. **Wireless remote controller does not have a temperature-sensor. Switchable fan speed: High/Low (FHQ7-2BV) Programme "Dry" Dehumidification is microprocessor controlled to prevent abrupt and uncomfortable changes in air temperature. Quiet operation Indoor unit High Middle Low 7BV 39 --- 3 00BV 42 --- 37 2BV 44 --- 39 40CA 4 42 38 Uses quiet stream fan and other quiet technologies. (FHQ7-2BV) Flexible installation The unit fits more snugly into tight spaces. Drain pump kit (option) can be easily incorporated Drain pipe connection can be done inside the unit. refrigerant and drain pipe outlets are at the same opening. Turbulent flow is reduced Straightening plate * For dust concentration of 0. mg/m 3 Two time settings (200 hrs and 20 hrs) are available to match the installation environment. Maintenance time warning is displayed on the remote controller (filter sign). Non-flocking flap Drain pump kit (built inside main unit) Easy maintenance Long-life filter lasts up to months* Easy-clean, flat surfaces Oil resistant grille db(a) Note : Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions. Quiet stream fan Installation flexibility for freedom of design *Water used in the test-run can now be drained from the air discharge opening rather than from the side as was formerly the case. All wiring and internal servicing can be done from under the unit Simplified piping installation Non-flocking flap 30mm or more Condensation does not easily form on and dirt does not cling to non-flocking flap. It is easy to clean. 00 mm Oil-resistant plastic is used for the air suction grille. This satisfies durability in restaurants and other similar environments. Note: Intended for use in salons, dining rooms, and ordinary sales floors, this specification is not suitable for kitchens or other harsh environments. 30mm or more 0
WALL MOUNTED TYPE Compact design and easy installation NEW FAQ7/00C FAQ7C FAQ00C Accessory required for indoor unit Wired LCD remote controller "Nav Ease" BRCE2 Note: Remote controller cable not included. Cables must be procured locally. Option Wireless LCD remote controller A signal receiver must be added to the indoor unit. BRC7EB8 Signal receiver unit (Installed type) Wireless remote controller and signal receiver unit are sold as a set. Features Comfort Remote controller Cleanliness Work & Servicing Control features Others Auto swing Draft prevention function (heating) Switchable fan speed (3 step) Auto airflow rate High fan speed mode Programme "Dry" Two selectable temperature-sensors Hot start (after defrost) * * *2 * * * * *3 *2 *2 *2 * Applicable when wired remote controller is used * 2 For the outdoor units * 3 Option Year-round cooling applicable Night quiet operation Setpoint auto reset Setpoint range set Weekly schedule timer Off timer (programmed) Mould-proof air filter Drain pump mechanism Pre charged for up to 30 m Filter sign Low gas pressure detection Emergency operation Self-diagnosis function Auto-restart Auto-cooling/heating change-over Control by 2 remote controllers Group control by remote controller External command control Central remote control Interlock control DIII-NET communication standard Anti corrosion treated heat exchangers
340 mm Compact & Sophisticated design FAQ00,200mm Flaps close fully when not in use Comfortable Auto swing (up and down) and wide-angle louvers (left and right by hand) facilitate even room temperature Air discharge modes ensure comfortable air distribution across the entire room 9kg lighter 370mm shorter Comfort even on the far side of the room To carry air to the far side of long rooms, extra-high airflow adds 0% more fan speed the "high" setting. Air discharge setting is selected from the remote controller by field setting. Height Width Weight Wide-angle louvers (adjusted manually) Soft material louver bends airflow over a wider area Auto-swing Two selectable temperature-sensors FAQ00BV 30mm,70mm 2kg Switchable fan speed: High/Middle/Low FAQ00C 340mm,200mm Depth 200mm 240mm 7kg -level air direction setting Gettable to different levels Easy installing and servicing -direction piping offers greater installation flexibility. Maintenance possible from the front of the unit All maintenance tasks can be carried out via front access. During service work, attachment and detachment of parts is easier. Drain pump kit is available as option. Installs onto side of unit. Height of drain up,000 mm Drain pump kit Drain pump kit can be installed on either left and right side of the air conditioner. Indoor unit Connection to a centralised control system is available, no need for option card. Easy cleaning Removable and washable grille Flat panel, easy to wipe dust off Non-flocking flaps Back-right pipe Right pipe Bottom-right pipe Left pipe Back-left pipe Bottom-left pipe Refrigerant piping Condensation does not easily form on and dirt does not cling to non-flocking flaps. It is easy to clean. Auto airflow rate (When BRCE2 is used) Programme "Dry" Dehumidification is microprocessor controlled to prevent abrupt and uncomfortable changes in air temperature. 2
OUTDOOR UNIT Complies with MEPS RZQ0KBV4A RZQ0KBV4A RZQ7KCV4A RZQ00KCV4A RZQ2KCV4A RZQ40KCV4A RZQ00HAY4A RZQ2HAY4A RZQ40HAY4A Easy installation and maintenance Pre charged for up to 30 metres If the refrigerant piping length does not exceed 30 m, there is no need for on-site gas charging. 7 m piping length (Applicable to RZQ00KC 40KC and RZQ00HA 40HA outdoor units) Allowed refrigerant piping length and level difference Pre charged Max. length Max. level difference Compact and light weight Easy centralised installation with the module oriented design 4-direction piping offers greater layout freedom The outer panel for the piping connection part of the front, right side and backside can be removed and is easier for post-installation piping work. Facilitates pump down (Refrigerant recovery function) Separation available A pump-down switch is provided to make it easier to collect refrigerant if the unit is to be moved or layout modified. *Pump-down function is available for pre-charged refrigerant amount. Low gas pressure detection function Effective gas monitoring reduces the labor required for operation, maintenance, and repairs. 0/0KB, 7KC 00/2/40KC 00/2/40HA Height(mm) 770,70,34 Width(mm) 900 Depth(mm) 320 Weight(kg) 8 98 08 Night time quiet operation function The Automatic night quiet mode will initiate 8 hours after the peak temperature is reached in the daytime, and normal operation will resume 0 hours after that. Reducing noise will reduce capacity slightly. RZQ0/0KB RZQ7KC RZQ00KC/00HA RZQ2KC/2HA RZQ40KC/40HA 0/0KB 30 m 7KC 30 m 0 m (Equivalent length 70m) 30 m 00-2KC 00-2HA 7 m (Equivalent length 90m) Note : Additional refrigerant charging is required if the refrigerant pipe is longer than the length. Sound level (db(a)) Rated 2 Night Quiet Mode 48 44 48 49 44 4 0 4 0 4 Note : Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions. 2 Value when cooling. Value will differ when heating. Capacity (%) Load (%) Operation Sound (db(a)) Peak in outdoor temperature 00 0 0 0 Rated 4 8:00 Quiet mode 8 hours 0 hours Quiet mode 2:00 :00 20:00 0:00 4:00 8:00 Note : 3 In case of RZQ2 Operation range Suited for year-round cooling applications Cooling is efficient even in winter when indoor temperatures are higher than those outside, such as in underground public spaces or offices with many computers. Wide operation range 0 40 30 20 0 0-0 -20 4 C DB Cooling - C DB Outdoor temp( CDB) Durability. C WB Heating - C WB Outdoor temp( CWB) As the bottom frame is subject to corrosion, a corrosion-proof galvarium steel plate is adopted to enhance the durability. Heat exchange fins are provided with anti-corrosion treatment Construction Non-treated fin Aluminium Power consumption Anti corrosion treated heat exchangers Hydrophilic film Aluminium Corrosion resistant acrylic resin Demand Control The maximum capacity is maintained within a set level of power consumption, which makes it possible to keep a comfortable and effective demand control. Limitation 8:00 2:00 :00 20:00Time * Required for KRP8M (Option) 3
Technology for energy efficiency The high efficiency compressor to achieve a high COP Compressor equiped with Reluctance DC motor Daikin DC Inverter models are equipped with the Reluctance DC motor for compressor. The Reluctance DC motor uses 2 different types of torque, neodymium magnet* and reluctance torque* 2. This motor can save energy because it generates more power with a smaller electric power than an AC or conventional DC motor. 2 3 Motor efficiency (%) 90 80 70 0 Reluctance DC Motor More than 20% AC motor Conventional DC motor Reluctance DC motor 0 0 30 0 90 20 Rotational speed (rps) Small load Large load Low capacity High capacity Note: Data are based on studies conducted under controlled conditions at a Daikin laboratory. *. A neodymium magnet is approximately 0 times stronger than a standard ferrite magnet. *2. The torque created by the change in power between the iron and magnet parts. >> Smooth sine wave DC inverter Use of an optimised sine wave smoothes motor rotation, further improving operating efficiency. Sine wave DC inverter RZQ0/0KB, RZQ7KC >> Swing compressor Energy savings is realised, eliminating the friction and the leakage of refrigerant gas. Swing bushing Refrigerant gas Piston by incorporated blade and roller. RZQ00/2/40KC, RZQ00/2/40HA >> The structural scroll Sucked gas is compressed in the scrolling part before the heated motor, so that the machine compress the Discharge non-expanded gas, resulting in high efficiency compression. Suction Scroll section Motor section 2 Smooth Air Inlet Bell Mouth and Aero Spiral Fan These two features work to reduce noise. Guides are added to the bell mouth intake to reduce turbulence in the airflow generated by fan suction. The Aero Spiral Fan features fan blades with the bent blade edges, further reducing turbulence. With the bent blade edge Without the bent blade edge Escaping eddies are sucked in by the bent blade edges, reducing overall turbulence. DC fan motor 3 DC fan motor structure Efficiency improved in all areas compared to AC motors, especially at low speeds. 4
LCD REMOTE CONTROLLER Easy-to-read LCD remote controller allows various system Remote controller options are shown on the page introducing each indoor unit model. Wired Remote Controller "Nav Ease" NEW This simple, contemporary remote controller with fresh white colour matches your interior design. The clear, backlight display with large easy-to-read text makes navigation easy and provides one-touch control over your in-home comfort. BRCE2 Clear Display Dot matrix display A combination of fine dots enables various icons. Large text display is easy to see. Backlight display Auto operation mode Until now only the temperature for one point could be set, but now the new remote controller (BRCE2) allows the setting of both Cooling and Heating, and with the fan operation, mid-range temperatures are comfortable andoperation is more energy efficient. NEW 2 setpoints Cooling / Heating Heating operation 20ºC 2ºC Fan operation NEW Setpoint range set - Saves energy by limiting the min. and max. set temperature. - Avoids excessive heating or cooling. - This function is convenient when the remote controller is installed at a place where any number of people may operate it. Energy saving Cooling operation NEW Setpoint auto reset - Even if the set temperature is changed, it returns to the preset temperature after a preset period of time. - Period selectable from 30min/0min/90min/20min. Restaurant sample Restaurant opened Temperature is set to 27ºC Full tables at lunchtime Then is lowered to 24ºC for crowded room After 30 minutes* Automatically returns to preset temperature (27ºC) *Setting possible for after 30, 0, 90, and 20 minutes. 27 C 24 C Returns to 27 C automatically Off timer (programmed) - Sets and saves setting for an increment of time that automatically turns off air conditioner after a preset period of time for each time operation starts. - Period can be preset from 30 to 80 minutes in 0-minute increments.
control configurations and control of multiple indoor units. Convenience Weekly schedule - actions per day can be scheduled for each day of the week. - The holiday function will disable schedule timer for the days that have been set as holiday. NEW - 3 independent schedules can be set. (e.g. summer, winter, mid-season) College classroom sample (a summer Monday case) ) 8:30 ON The first period starts and the air conditioner starts the cooling operation. 2) 0:00 OFF In the second period, the classroom is unoccupied and the air conditioner stops. 3) 3:00 ON When the third period starts, operation starts again. 4) :00 OFF After the third period, the classroom becomes vacant again and the air conditioner stops. ON OFF ON OFF Multilingual display Display is available in languages. (English, German, French, Spanish, Italian, Portuguese, Greek, Dutch, Russian, Turkish, and Polish). LCD wireless remote controller The wireless remote controller is supplied in a set with a signal receiver. Signal receiver unit is contained inside decoration panel or indoor unit. Shape of signal receiver unit differs according to the indoor unit. Note: The signal receiver unit shown in the photograph is for mounting inside the decoration panel of the ceiling mounted cassette type. Wireless remote controller Signal receiver unit (For ceiling mounted cassette type) BRC7F32F Wireless remote controller for each indoor unit type Heat pump CEILING MOUNTED CASSETTE TYPE CEILING SUSPENDED TYPE 7-2BV 00CA BRC7F32F BRC7EA3W BRC7GA3 WALL MOUNTED TYPE BRC7EB8 SkyAir shares common control with the Heat Reclaim Ventilator and other Daikin air-conditioning units, thus simplifying interlocking operations. SkyAir Indoor unit Interlocking LCD remote controller for SkyAir indoor unit Heat Reclaim Ventilator
Simple system provides a diverse assortment of control modes. Control pattern Wired remote controller Wireless remote controller Control by remote controller (Basic system) Non-polar, double-core (max. wiring length 00 m) Signal receiver unit installed on indoor unit Control by 2 remote controllers For control from 2 locations such as in room and control room, exits, etc. Connects 2 wired remote controllers (See note ) Not possible (See note 2, 3) Group control For simultaneous control of up to indoor units. Automatic address setting function Automatic address setting function Signal receiver unit installed on indoor unit Control by external command Operation and surveillance is carried out using the contact signal from the operation control box in the building surveillance (security) room. Optional wiring adaptor for electrical appendices is necessary Optional wiring adaptor for electrical appendices is necessary Central remote controller (option) Central remote controller (option) Centralised remote control Centralised control of up to 4 indoor groups from remote location up to kilometer away. Optional SkyAir series interface adaptor required (See note 4) Optional SkyAir series interface adaptor required (See note 4) Interlock control with Heat Reclaim Ventilator Link by remote controller group control. Heat Reclaim Ventilator Can be operated simultaneously or independently by remote controller (set by ventilation mode) Central remote controller (option) Heat Reclaim Ventilator Can be operated simultaneously by remote controller (set by ventilation mode) Central remote controller (option) Zone link control by centralised control. Heat Reclaim Ventilator Heat Reclaim Ventilator Heat Reclaim Ventilator for indoor units within a zone are operated by interlocking. Can also be operated independently by remote controller. Heat Reclaim Ventilator for indoor units within a zone are operated by interlocking Note:.BRCE2 can connect to BRCE2 only. 2.It is not possible to use two wireless remote controllers. 3.BRCE2 cannot connect to wireless remote controller. 4.The ceiling mounted cassette type <Round Flow>, ceiling suspended type(40ca only), and wall mounted type come standard with an interface adaptor for SkyAir series. Easily adaptable to large-scale, high-function, centralised remote control system. Central remote controller Unified on/off controller Schedule timer DCS302CA (Option) DCS30BA (Option) DST30BA (Option) DCS0C (Option) Centralised control, with a setting as simple as it is with a standard remote controller, of up to 4 groups (,024 indoor units) is possible. Centralised control of on/off by group or all at once for up to 2 indoor units. Unified control of weekly schedule for up to,024 indoor units. Schedule timer sets on/off time in minute units to be executed twice a day for a week at a time. With its high functionality, the full colour all-in-one graphic controller facilitates management of SkyAir System in a variety of ways. Interface adaptor for SkyAir series DTA2BA (Option) Enables centralised control via connection to a high-speed, DIII-NET communication system, adopted for the Daikin VRV system. Necessary for interface adaptor for SkyAir series with the central remote control units shown at above. The interface adaptor for the SkyAir series is optional except for the ceiling mounted cassette type <Round Flow>, ceiling suspended type (40CA only), and wall mounted type. 7
Abundance of features that provide comfortable air-conditioning in stores and offices. Note: Some features only available on selected models. See model pages for full list of features applicable to each unit. Comfort Auto-swing Delivers comfortable air-conditioning to all areas, near to and far from the air-conditioner. Swing pattern selection (standard, ceiling soiling prevention) The air flow direction can be fixed at your desited angle by the remote controller. You can freely set 2 air discharge settings by remote controller. () Air direction in standard setting Switchable fan speed (2) Air direction in ceiling soiling prevention setting Draft prevention function (heating) To prevent cold air drafts, automatically adjusts airflow to near horizontal position when heating initially starts or when the thermostat turns off. High setting provides maximum reach while low setting minimises drafts. High-ceiling application Applicable for ceiling mounted cassette type and ceiling suspended type. Delivers air-conditioning comfort all the way down to the floor in air-conditioning zones with high ceilings. Note:When units are installed on high ceilings, depending on the model, various restrictions concerning maximum height, air discharge direction, and choice of options may apply. Two selectable temperature-sensors Temperature-sensors are included in the indoor unit and optional wired remote controller. Temperature sensing closer to the target area is possible to further increase the comfort level. Use the temperature-sensor in the indoor unit when controlling air conditioning from another room. Note: Wireless remote controllers have no temperature-sensor. Auto airflow rate Airflow rate is automatically controlled in accordance with the difference between room temperature and set temperature. High fan speed mode Applicable for wall mounted type. You can increase fan speed approximately 0% higher than the "high" setting. Programme "Dry" Dehumidification is a microprocessor controlled to prevent abrupt and uncomfortable changes in air temperature. Useful for reducing uncomfortable humidity without uncomfortable cooling of the room. Remote Controller Setpoint auto reset Even if the set temperature is changed, it returns to the preset temperature after a preset period of time. Setpoint range set Saves energy by limiting the minimum and maximum set temperatures. Avoids excessive heating and cooling. Cleanliness Anti-bacterial air filter The Air filter has a anti-bacterial treatment to help prevent the growth of bacteria and mould on it. Mould-proof air filter Sanitary filter has mould-resistant treatment. Hot start (after defrost) Cold air flow is avoided when heating operation starts or when switching to heat after defrosting. Year-round cooling applicable Efficient cooling even in winter when the indoor temperatures are higher than those outside, such as in underground public spaces or offices with many computers. Night quiet operation The Automatic night quiet mode will initiate 8 hours after the peak temperature is reached in the daytime, and normal operation will resume 0 hours after that. Weekly schedule timer Up to five operation ON/OFF settings can be programmed per day for each day of the week. Not only can the time be set for the operation ON setting, but also the temperature. Off timer (programmed) Sets and saves setting for an increment of time that automatically turns off air conditioner after a preset period of time for each time operation starts. Silver ion anti-bacterial drain pan Mould-proof drain pan includes a silver ion antibacterial agent that assists in preventing the growth of slime, bacteria, and mould that cause smells and clogging. 8
Note: Some features only available on selected models. See model pages for full list of features applicable to each unit. Work and Servicing Drain pump mechanism Applicable for ceiling mounted cassette type and ceiling suspended type. Steeper gradient realises more efficient condensate drainage. High-lift is especially useful for long lengths of drain piping. Low gas pressure detection Insufficient gas charging is normally hard to detect. During post-installation trials and regular inspection procedures, the refrigerant level is monitored by a microprocessor to maintain proper gas pressure. Reliability is assured and maintenance and inspection can be carried out more quickly. Pre charged for up to 30 metres If the refrigerant piping length does not exceed 30 m, there is no need for on-site gas charging. Filter sign The filter sign warns you when it is time to clean the filter. *When using a wired remote controller the sign is displayed in the LCD. When using a wireless remote controller the filter sign lamp illuminates on the signal receiver unit. Ceiling soiling prevention function Applicable for ceiling mounted cassette type. Daikin's innovative air discharge mechanism keeps airflow away from the ceiling. Ceiling cleaning is less frequently required. Control features Auto-restart If there is a power outage while the equipment is operating, operations will restart in the same mode as before the power cut when electricity is restored. Auto cool/heat change-over (Heat pump only) Detects difference in preset temperature and actual room temperature and automatically switches to cooling or heating accordingly. Control by 2 remote controllers Using 2 remote controllers you can operate the equipment locally or from a remote location. Note: When a wireless remote controller is used, remote control by two remote controllers is not possible. Group control by remote controller You can turn up to indoor units on/off with a single remote controller. (When using connected indoor units, the settings must all be the same and on/off will be simultaneous.) Emergency operation If there is a malfunction elsewhere in the system, the fan or compressor can still be operated. Self diagnosis function The operating parameters of indoor and outdoor units, and sensor data at critical locations throughout the system, are constantly monitored using a microcomputer. To facilitate a quick response in the event of a malfunction, a message appears on the LCD of the remote controller and an LED on the unit illuminates. External command control Operation and surveillance is carried out using the contact signal from the operation control box in the building surveillance (security) room. *Required for KRP8M (Option) Central remote control An optional central remote controller enables centralised control of up to 024 indoor units (4 groups) from up to kilometer away. Interlock control Enables interlocking control with external equipment such as Heat Reclaim Ventilator. DIII-NET communication standard Standardly equipped interface enables connection to centralised control system without need of an adaptor. Options High-efficiency filter unit Fresh-air intake kit Applicable for ceiling mounted cassette type. Applicable for ceiling mounted cassette type. Two types are available: % and 90% colorimetry. You can provide air-conditioning with fresh air from outside. Convenient for places where a ventilation fan cannot be installed. Others Anti corrosion treated heat exchangers Note: *Connecting ducts, insect nets, fire dampers, air filters, and other parts should, as required, be procured locally. **Outside Air fan interlocked with air conditioning unit is necessary. Optional PCB(KRPC3)is required for interlocking. ***It is recommended that the volume of outdoor air introduced through the kit is limited to 0% of the maximum airflow rate of the indoor unit. Introducing higher quantities will increase the operating noise and may also influence temperature sending. To achieve increased durability by improved resistance to salt corrosion and atmospheric pollution, coated Anti corrosion treated heat exchangers (with special acryl pretreatment) are used for the heat exchanger of the outdoor unit. In high corrosive areas, regular maintenance needs to be carried out. 9
SPECIFICATIONS CEILING MOUNTED CASSETTE TYPE 0 0 7 00 2 40 00 2 40 Model Indoor unit FCQ0KVEA FCQ0KVEA FCQ7KVEA FCQ00KVEA FCQ2KVEA FCQ40KVEA FCQ00KVEA FCQ2KVEA FCQ40KVEA Name Outdoor unit RZQ0KBV4A RZQ0KBV4A RZQ7KCV4A RZQ00KCV4A RZQ2KCV4A RZQ40KCV4A RZQ00HAY4A RZQ2HAY4A RZQ40HAY4A Power supply Phase, 240 V, 0 Hz 3 Phase, 4 V, 0 Hz Cooling capacity.0.8 7. 0.0 2. 3. 0.0 2. 3. kw Rated (Min. - Max.) (3.2-.) (3.2-.0) (3.2-8.0) (.0-.2) (.7-4.0) (.2-.4) (.0-.2) (.7-4.0) (.2-.4) Heating capacity 2.0 7.0 8.0.2 4.0.0.2 4.0.0 kw Rated (Min. - Max.) (3.-7.0) (3.-8.0) (3.-9.0) (.-2.8) (.0-.2) (.2-8.0) (.-2.8) (.0-.2) (.2-8.0) Power consumption Cooling kw.27..99 2.94 4.02 4.4 2.94 3.77 4.39 Heating 2 kw.4.74 2.0 3.03 3.83 4.80 3.03 3.83 4.80 Indoor Colour Unit ---------- unit Decoration panel White Airflow rate (H/L) /s 30/22 30/22 30/22 33/333 0/37 0/37 33/333 0/37 0/37 m 3 /min 2/3. 2/3. 2/3. 32/20 33/22. 33/22. 32/20 33/22. 33/22. Sound pressure level (H/L) 3 db(a) 3/28 3/28 3/28 43/32 44/34 44/3 43/32 44/34 44/3 Sound power level (H/L) 4 db(a) 3/4 3/4 3/4 0/0 /2 /4 0/0 /2 /4 Dimensions Unit mm 2X840X840 2X840X840 2X840X840 298X840X840 298X840X840 298X840X840 298X840X840 298X840X840 298X840X840 (HXWXD) Decoration panel mm 0X90X90 0X90X90 0X90X90 0X90X90 0X90X90 0X90X90 0X90X90 0X90X90 0X90X90 Machine Unit kg 2 2 2 24 24 24 24 24 24 weight Decoration panel kg......... Certified Cooling CWB 4 to 2 Operation range Heating CDB to 27 Outdoor Colour White unit Compressor Type Hermetically sealed swing type Hermetically sealed scroll type Motor output kw.3..7.9 2.4 3..7 2.2 2.9 Refrigerant charge (R-40A) 2.7 2.7 2.7 3.7 3.7 3.7 4.3 4.3 4.3 kg (Charged for 30 m) (Charged for 30 m) (Charged for 30 m) (Charged for 30 m) (Charged for 30 m) (Charged for 30 m) (Charged for 30 m) (Charged for 30 m) (Charged for 30 m) Sound pressure Cooling/Heating 3 db(a) 48/0 48/0 48/0 49/ 0/2 0/2 49/ 0/2 0/2 level Night quiet mode db(a) 44 44 44 4 4 4 4 4 4 Sound power level 4 db(a) ------ ------ ------ ------ Dimensions (HXWXD) mm 770X900X320 770X900X320 770X900X320,70X900X320,70X900X320,70X900X320,34X900X320,34X900X320,34X900X320 Machine weight kg 8 8 8 98 98 98 08 08 08 Certified Cooling CDB - to 4 Operation range Heating CWB - to. Piping Liquid (Flare) mm o/ 9. o/ 9. o/ 9. o/ 9. o/ 9. o/ 9. o/ 9. o/ 9. o/ 9. connections Gas (Flare) mm o/.9 o/.9 o/.9 o/.9 o/.9 o/.9 o/.9 o/.9 o/.9 Drain Indoor unit mm I.Do/ 2XO.Do/ 32 I.Do/ 2XO.Do/ 32 I.Do/ 2XO.Do/ 32 I.Do/ 2XO.Do/ 32 I.Do/ 2XO.Do/ 32 I.Do/ 2XO.Do/ 32 I.Do/ 2XO.Do/ 32 I.Do/ 2XO.Do/ 32 I.Do/ 2XO.Do/ 32 Outdoor unit mm o/ 2.0 (Hole) o/ 2.0 (Hole) o/ 2.0 (Hole) o/ 2.0 (Hole) o/ 2.0 (Hole) o/ 2.0 (Hole) o/ 2.0 (Hole) o/ 2.0 (Hole) o/ 2.0 (Hole) Max. interunit piping length m 0 7 30 (Equivalent length 70) (Equivalent length 90) Max. installation level difference m 30 Heat insulation Both liquid and gas piping CEILING SUSPENDED TYPE Model Name Power supply Cooling capacity Rated (Min. - Max.) Heating capacity 2 Rated (Min. - Max.) Cooling Power consumption Heating 2 Indoor Colour unit Airflow rate (H/M/L) Outdoor unit Indoor unit Outdoor unit Sound pressure level (H/M/L) 3 Sound power level (H/M/L) 4 Dimensions (HXWXD) Machine weight Certified Cooling Operation range Heating Colour Compressor Type Motor output Refrigerant charge (R-40A) Sound pressure Cooling/Heating 3 level Night quiet mode Sound power level Cooling/Heating 4 Dimensions (HXWXD) Machine weight Certified Cooling Operation range Heating Piping Liquid (Flare) connections Gas (Flare) Drain Indoor unit Outdoor unit Max. interunit piping length Max. installation level difference Heat insulation Note : Rated cooling capacities are based on the following conditions: Indoor temp., 27 CDB, 9.0 CWB; outdoor temp. 3 CDB, 24 CWB. Equiv. refrigeration piping, 7. m (horizontal). 2 Rated heating capacities are based on the following conditions: Indoor temp., 20 CDB, CWB; outdoor temp., 7 CDB, CWB. Equiv. refrigeration piping, 7. m (horizontal) 3 Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions. 4 Numerical values are according to ISO 374:999. kw kw 7 00 2 FHQ7BVVB FHQ00BVVB FHQ2BVVB 40 FHQ40CAVEA 40 FHQ40CAVEA RZQ7KCV4A RZQ00KCV4A RZQ2KCV4A RZQ40KCV4A RZQ00HAY4A RZQ2HAY4A RZQ40HAY4A Phase, 240 V, 0 Hz 3 Phase, 4 V, 0 Hz 9.2.2 9.2.2 3.2 (.0-.2) (.7-4.0) (.0-.2) (.7-4.0) (.2-.4).8 (3.2-8.0) 7. (3.-9.0) 0. (.-2.8) 3. (.0-.2) 3.2 (.2-.4).0 (.2-8.0) 00 2 FHQ00BVVB FHQ2BVVB 0. (.-2.8) 3. (.0-.2).0 (.2-8.0) kw.77 2.93 3.70 4.40 2.8 3. 4.33 kw 2.32 3.33 4.3.00 3.2 4.3 4.93 White Fresh white White Fresh white /s 283/-/233 400/-/333 00/-/47 7/483/400 400/-/333 00/-/47 7/483/400 m 3 /min 7/-/4 24/-/20 30/-/2 34/29/24 24/-/20 30/-/2 34/29/24 db(a) 39/-/3 42/-/37 44/-/39 4/42/38 42/-/37 44/-/39 4/42/38 db(a) /-/ 8/-/3 0/-/ 4/0/ 8/-/3 0/-/ 4/0/ mm 9X,0X80 9X,400X80 9X,90X80 23X,90X90 9X,400X80 9X,90X80 23X,90X90 kg 27 32 3 38 32 3 38 CWB 4 to 2 CDB to 27 White Hermetically sealed swing type Hermetically sealed scroll type kw.7.9 2.4 3. 2.3 2.7 2.9 kg 2.7 (Charged for 30 m) 3.7 (Charged for 30 m) 4.3 (Charged for 30 m) db(a) 48/0 49/ 0/2 49/ 0/2 db(a) 44 4 4 4 4 db(a) 7 ------ 7 ------ mm 770X900X320,70X900X320,34X900X320 kg 8 98 08 CDB - to 4 CWB - to. mm o/ 9. mm o/.9 mm VP20 (External Dia, 2/Internal Dia. 20) mm o/ 2.0 (Hole) m 0 (equivalent length 70) 7 (equivalent length 90) m 30 Both liquid and gas piping 20
SPECIFICATIONS WALL MOUNTED TYPE Model Name Power supply Cooling capacity Rated (Min. - Max.) Heating capacity 2 Rated (Min. - Max.) Cooling Power consumption Heating 2 Indoor Colour unit Airflow rate (H/M/L) Outdoor unit Piping connections Indoor unit Outdoor unit Sound pressure level (H/M/L) 3 Sound power level (H/M/L) 4 Dimensions (HXWXD) Machine weight Certified Cooling Operation range Heating Colour Compressor Type Motor output Refrigerant charge (R-40A) Sound pressure Cooling/Heating 3 level Night quiet mode Sound power level Cooling/Heating 4 Dimensions (HXWXD) Machine weight Certified Cooling Operation range Heating Liquid (Flare) Gas (Flare) Drain Max. interunit piping length Max. installation level difference Heat insulation Indoor unit Outdoor unit 7 00 00 FAQ7CVEA FAQ00CVEA FAQ00CVEA RZQ7KCV4A RZQ00KCV4A RZQ00HAY4A Phase, 240 V, 0 Hz 3 Phase, 4 V, 0 Hz kw 7. 0.0 (3.2-8.0) (.0-.2) kw 8.0.2 (3.-9.0) (.-2.8) kw 2.20 3.9 kw 2.33 3.4 3.44 White /s 300/27/233 433/383/37 m 3 /min 8//4 2/23/9 db(a) 4/42/40 49/4/4 db(a) /8/ /2/8 mm 290X,00X238 340X,200X240 kg 3 7 CWB 4 to 2 CDB to 27 Ivory white Hermetically sealed swing type Hermetically sealed scroll type kw.7.9.7 kg 2.7 (Charged for 30 m) 3.7 (Charged for 30 m) 4.3 (Charged for 30 m) db(a) 48/0 49/ db(a) 44 4 db(a) mm 770X900X320,70X900X320,34X900X320 kg 8 98 08 CDB - to 4 CWB - to. mm o/ 9. mm o/.9 mm VP3(External Dia, 8/Internal Dia. 3) mm o/ 2.0 (Hole) m 0 (Equivalent length 70 m) 7 (Equivalent length 90 m) m 30 Both liquid and gas piping Note : Rated cooling capacities are based on the following conditions: Indoor temp., 27 CDB, 9.0 CWB; outdoor temp. 3 CDB, 24 CWB. Equiv. refrigeration piping, 7. m (horizontal). 2 Rated heating capacities are based on the following conditions: Indoor temp., 20 CDB, CWB; outdoor temp., 7 CDB, CWB. Equiv. refrigeration piping, 7. m (horizontal) 3 Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions. 4 Numerical values are according to ISO 374:999. 2
OPTIONS Indoor unit CEILING MOUNTED CASSETTE TYPE Name of option Decoration panel Sealing material of air discharge outlet Panel spacer Fresh air Chamber intake kit type Note: Refer to page 8 for the details. 2 Required for installing high-efficiency filter or ultra long-life filter. 3 Wiring for wired remote controller to be procured locally. 4 The indoor unit is equipped standardly with the interface adaptor for SkyAir series. An option is unnecessary. Installation box for adaptor PCB (KRPH98) is necessary. Remark Without the T-joint pipe and fan With the T-joint pipe, without fan Direct installation type Chamber connection kit 2 Insulation kit for high humidity High-efficiency filter (Colorimetric method %) (including chamber) (Colorimetric method 90%) Replacement (Colorimetric method %) high-efficiency filter (Colorimetric method 90%) Filter chamber Branch duct chamber Remote controller Wireless type Heat pump Wired type 3 "Nav Ease" Central remote controller 4 Unified ON/OFF controller 4 Schedule timer 4 Touch Controller 4 Adaptor for wiring Group control adaptor Installation box for adaptor PCB Remote sensor (for indoor temperature) Kit name FCQ0KVEA FCQ0KVEA FCQ7KVEA FCQ00KVEA FCQ2KVEA FCQ40KVEA BYCP2K-W KDBHK0F KDBPH0FA KDDPB0 KDDPB0K KDDPX0 KKSJKA0 KDTPK80 KDTPK0 KAFPB80 KAFPB0 KAFP7B80 KAFP7B0 KAFP2B80 KAFP2B0 KAFP3B80 KAFP3B0 KDDFPB0 KDJPB80 KDJPB0 BRC7F32F BRCE2 DCS302CA DCS30BA DST30BA DCS0C KRPC3 KRP4AA3 KRPH98 KRCS0-4B Round flow type: List of optional parts required to achieve different flow patterns For each flow pattern all round, 4-way, 3-way, 2-way, branch duct connection the compatibility of each independently installed option (shown in the column on the left) to accessory options (listed across the top of each table) is shown in the cells where the relevant row and column intersect. A circle (o) indicates compatibility, and a cross (x) indicates incompatibility. Any options not shown below are not suitable for independent or accessory installation. All-round flow 4-way flow Independently installable optional parts Panel/grille related Operation control related Auxillary function related Filter related 3-way flow 2-way flow Optional accessory parts Optional accessory parts Independently installable optional parts Panel/grille related Panel spacer Operation control related Wireless remote controller Auxillary function related Fresh air intake kit (direct mount) High-humidity operation kit Panel spacer Panel spacer o o o x o Wireless remote controller o o o o o Fresh air intake kit (Chamber type),2 o o x x o Fresh air intake kit (direct mount) o o x o o High-humidity operation kit x o x o x High-efficiency filter 2 o o o o x o 3 o 3 o 3 x x o 3 o o o x Fresh air intake kit (Chamber type),2 o 3 o x x x o 3 o x o x x o x o x Branch duct connection Optional accessory parts Independently installable optional parts Branch duct -way branch / unit 3-way flow (Chamber type) 2-way branch / unit 2-way flow (Round duct type) -way branch / unit 2-way flow Panel spacer Panel spacer Wireless remote controller Wireless remote controller Wireless remote controller In some cases, depending on how the unit is embedded in the ceiling, use of branch ducts and fresh air intake kits may not be possible. Before starting installation work make sure to check whether or not joint installation is possible. In particular, ensure that the lower fixing position caused by the addition of panel spacers is acceptable. 2 Use a chamber connection kit if two different types of optional chamber are used together. In this case, the fresh air intake kit must be installed in the upper position. 3 It is not possible to use panel spacers in a 2-way flow installation. 4 It is not possible to install a branch duct on the same side to which a fresh air intake kit (direct mount) is installed. Fresh air intake kit (Chamber type),2 Fresh air intake kit (Chamber type),2 Fresh air intake kit (Chamber type),2 Fresh air intake kit (direct mount) Fresh air intake kit (direct mount) Fresh air intake kit (direct mount) High-humidity operation kit High-humidity operation kit High-humidity operation kit High-efficiency filter 2 High-efficiency filter 2 High-efficiency filter 2 o o o o 4 x x x o o o 4 x x x o o o 4 x x 22
OPTIONS Indoor unit CEILING SUSPENDED TYPE Name of option Remark Kit name FHQ7BVVB FHQ00BVVB FHQ2BVVB FHQ40CAVEA Fresh air intake kit Drain pump kit ---------- KDU0N2VE KDDQ0A40 KDU0P40VE L-type piping kit (for upward direction) KHFPMA0 KHFPN0 Remote controller Wireless type Heat pump BRC7EA3W BRC7GA3 Wired type "Nav Ease" BRCE2 Central remote controller Unified ON/OFF controller Schedule timer Touch Controller DCS302CA 2 DCS30BA 2 DST30BA 2 DCS0C 2 DCS302CA 3 DCS30BA 3 DST30BA 3 DCS0C 3 Adaptor for wiring Wiring adaptor for electrical appendices 4 Interface adaptor for SkyAir series Installation box for adaptor PCB KRPBA4 KRP4AA2 DTA2BA KRPCA93 ---------- KRPD93A Remote sensor (for indoor temperature) KRCS0-B KRCS0-4B Electrical box with earth terminal (3 blocks) KJB3AA Electrical box with earth terminal (2 blocks) KJB22AA Note: Wiring for wired remote controller to be procured locally. 2 This optional accessory requires DTA2BA. 3 The indoor unit is equipped standardly with the interface adaptor for SkyAir series. An option is unnecessary. 4 Installation box for adaptor PCB is necessary. WALL MOUNTED TYPE Name of option Remark FAQ7CVEA Drain-up kit Remote controller Wireless type Heat pump Wired type "Nav Ease" Remote sensor (for Indoor temperature) Central remote controller 2 Unified ON/OFF controller 2 Schedule timer 2 Touch Controller 2 Wiring adaptor for electrical appendices 3 Installation box for adaptor PCB Electrical box with earth terminal (3 blocks) Electrical box with earth terminal (2 blocks) Noise filter ( For electromagnetic interface use only) Note: Wiring for wired remote controller to be procured locally. 2 The indoor unit is equipped standardly with the interface adaptor for SkyAir series. An option is unnecessary. 3 Installation box for adaptor PCB (KRP4AA93) is necessary. Kit name K-KDU72EVE BRC7EB8 BRCE2 KRCS0-4B DCS302CA DCS30BA DST30BA DCS0C KRP4AA KRP4AA93 KJB3AA KJB22AA KEK2-A FAQ00CVEA Outdoor unit Central drain plug Wire fixture for preventing overturning Fixture for preventing overturning Demand adaptor Name of option RZQ0KBV4A RZQ0KBV4A Kit name Heat pump RZQ00KCV4A RZQ2KCV4A RZQ40KCV4A RZQ7KCV4A RZQ00HAY4A RZQ2HAY4A RZQ40HAY4A KKPJF80 K-KYZPC KPT-0B0 KRP8M 23
DIMENSIONS (Unit: mm) CEILING MOUNTED CASSE TTE TYPE 0 24 0 80 7 Adjustable(0~7) 0 40 B 80~90(Ceiling opening space) (Note 4) 300 or less 70(Hanging bolt pitch) 420 9 29 Hanging bolt 4-M8~M0 Connection position of branch duct (round shape type) [FCQ0-40KVEA] 420 780(Hanging bolt pitch) 80~90(Ceiling opening space) (Note 4) [FCQ0-7KVEA] -M4 Prepared hole 840 Connection position 340 of branch duct 80 2 00=200 80 (square-shaped type) 24 20 C/L 7 30 280 330 9 0 2 4 2 C 24 2 8 Piping Connection Side Drain Connection Side 0 0 3 or less (Note 4) Connection position of branch duct (round shape type) 90 A arrow view 3 840 8 2x00=200 8 4 24 0 0 42 [FCQ0-40KVEA] [FCQ0-7KVEA] 2 7 30 A Note 2 90 7 27-M4 Prepared hole 30 9 0 24 3 or less (Note 4) Connection position of branch duct (square-shaped type) 0 00 or more (required space) From the floor side 200 or more 0 For height installation 24 8 [FCQ0-7KVEA] 2x00=200 24 C/L 8 Connection position of branch duct (round shape type) -M4 Hole 9 0 7 30 Connection position of branch duct (square-shaped type) B arrow view Connection position of branch duct (square-shaped type) 20-M4 Prepared hole 80 2x00=200 80 2 23 24 Connection position of branch duct (round shape type) Connection position of fresh air intake kit (direct installation type) [FCQ0-7KVEA] 90 C/L 0 24 09 9 7 30 ø00 (knock hole) 90 83 C arrow view 0 7 Connection position 8 2 00=200 8 of branch duct 0 (round shape type) C/L -M4 Hole 93 [FCQ00-40KVEA] 7 30 B arrow view Connection position of branch duct (square-shaped type) 20-M4 Prepared hole 80 2 00=200 2 80 23 0 Connection position of branch duct (round shape type) Connection position of fresh air intake kit (direct installation type) 29 9 [FCQ00-40KVEA] C/L 90 7 Connection position of branch duct (square-shaped type) 0 7 93 7 9 29 7 30 ø00 (knock hole) 90 9 C arrow view [FCQ00-40KVEA] [FCQ00-40KVEA] 0 288 0 80 Adjustable(0~7) 840 340 80 2 00=200 80 0 20 C/L 7 Hanging bolt 30 4-M8~M0 4 280 Connection position of branch duct 330 (round shape type) 0 40 7 29 -M4 Prepared hole Connection position of branch duct (square-shaped type) 9 7 2 0 298 2 0 0 3 840 8 2 00=200 27-M4 Prepared hole 8 4 0 0 0 42 3 or less (Note 4) Connection position of branch duct (round shape type) 2 7 30 A 30 9 7 93 3 or less 29 7 0 (Note 4) Connection position of branch duct (square-shaped type) 00 or more (required space) From the floor side 200 or more For height installation Required space 200mm or more 00mm or more 200mm 00mm or more 00mm or more or more 00mm or more The necessary space is 00mm or more when the air-outlet is blocked with the accessory. Moreover when the corner areas are blocked (both right and left of the blocked air outlet), the necessary space is 200mm or more. Notes: Sticking location for manufacture's label manufacture's label for indoor unit: Suction grille inner side's electric components box's lid surface manufacture's label for decoration panel : Decoration panel's corner decoration cover inner surface 2 In case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote controller in detail. 3 When the temperature and humidity in the ceiling exceed 30 C and RH 80% or the fresh air is inducted into the ceiling or the unit continues 24 hour operation, an additional insulation (thickness 0mm or more of glasswool or polyethylene form) is required. 4 Though the installation is acceptable up to maximum of 90mm square ceiling opening, keep the clearance of 3mm or less between the indoor unit and the ceiling opening so that the panel overlap allowance can be ensured. Please do not place the thing been damp and troubled under an indoor unit. When the case where humidity is 80% or more, and the drain outlet are choked up and the air filter are dirty, dew may fall. 2 3 4 7 8 9 Liquid piping connection Gas piping connection Drain piping connection Transmission wiring connection Remote controller wiring connection Air-outlet Suction grille Corner decoration cover Drain hose (accessory) 24
DIMENSIONS (Unit: mm) CEILING SUSPENDED TYPE [FHQ7-2BVVB] FHQ7BVVB FHQ00BVVB FHQ2BVVB (Required space) A 20 30 0 80 B 0 400 90 20 20 (Hanging position) Hanging bolt 4-M8~M0 9 A (Hanging position) 70 0 90 8 7 42 8 27 3 8 02 0 8 92 0 8 3 40 0 0 Position slit hole for taking out in piping back (View from the front) 2 80 40 9 4 0 0 0 (Required space) 3 Position : Hole of wall for taking out in piping back (View from the front) For height installation From the floor side 200 or more 3 300 or more (Required space) Obstacle Floor side 30 or more (Service space) B The Front 30 or more (Service space) Brand name plate (Note.2) 4 o/ 4 90 4 Drain piping connection VP20 (For left piping) 300 27 80 80 0 3 2 7 70 Notes: Location of unit's Name Plate: Bottom of fan housing inside the suction grille. 2 In case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote controller in detail. 3 (Applies to FHQ7BV only) The remote control code is the standard <about 3 m outside the machine> attached. (0. mm 2 2 wicks O.D..4) (It is not attached to heat reclaim ventilator.) 22 27 4 Air discharge grille 2 Air suction grille 3 Air filter 4 Gas piping connection Liquid piping connection Drain piping connection 7 Earth terminal (inside the electric components box) (M4) 8 Suspension bracket 9 Backward piping and wiring connection opening lid 0 Upward piping and wiring connection opening lid Right side piping connection 2 Left back drain piping connection 3 Left side drain piping connection 4 Right side drain piping connection Hole of wall for taking out in piping back Upward drain piping connection 7 Upward gas piping connection 8 Upward liquid piping connection CEILING SUSPENDED TYPE [FHQ40CAVEA] 8 7 20 20 0 02 3 7 3 20 90 Connection position of fresh air intake kit φ00(knock out hole) 9 (Required space) Hanging bolt 4-M8~M0 4 23 9 3 97 20 30 87 00 3 89 9 90 20 (Hanging bolt pitch) 0 (Hanging bolt pitch) 0 8 40 9 220 03 97 7 92 7 90 7 3 0 2 Position slit hole for taking out in piping back (View from the front) 3 34 9 (Required space) For height installation From the floor side 200 or more 7 3 300 or more (Required space) Obstacle Floor side 30 or more (Service space) Drain piping connection VP20 (For left piping) 28 7 30 or more (Service space) Notes: Location of unit's Name Plate: Bottom of fan housing inside the suction grille. 2 In case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote controller in detail. 3 Please do not place the thing been damp and troubled under an indoor unit. When the case where humidity is 80% or more, and the drain outlet are choked up and the air filter are dirty, dew may fall. 90 The Front 3 2 7 83 0 Brand name plate (Note.2) 24 22 28 4 o/ 4 7 4 Position : Hole of wall for taking out in piping back (View from the front) Air discharge grille 2 Air suction grille 3 Air filter 4 Gas piping connection Liquid piping connection Drain piping connection 7 Earth terminal (inside the control box) (M4) 8 Hanger 9 Rear piping penetration cover 0 Top panel penetration cover Right side piping connection 2 Left back drain piping connection 3 Left side drain piping connection 4 Right side drain piping connection Hole of wall for taking out in piping back Upward drain piping connection 7 Upward gas piping connection 8 Upward liquid piping connection 2
WALL MOUNTED TYPE [FAQ7CVEA] Piping direction 290 Approx.400 240 238 Dimensions for full open front panel 7 30 or more 0 or more (Required space) (Required space) 8 9 2 0 or more (Requred space) Piping direction 3 Name plate Note)2 00 200 or more For installation in high spaces 20 or less Outside line φ80 hole 04 894 2 φ80 hole Piping and Wiring intake 0 4. 44 Piping direction 0 or more (Requred space) 0 Approx.34 98 4 Approx.390 Mounting location Approx.47 Notes: Location of unit's of Name Plate:Right side surface of casing 2 In case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote contorller in detail. 3 Please do not place the thing been damp and troubled under an indoor unit. when the case where humidity is 80% or more, and the drain outlet are choked up and the air filter are dirty, dew may fall. 44 Front panel 2 Front grill 3 Air outlet 4 Gas piping Liquid piping Drain hose 7 Earth terminal 8 Right side piping connection hole 9 Left side piping connection hole WALL MOUNTED TYPE [FAQ00CVEA] Piping direction 340 Approx.440 242 240 Dimensions for full open front panel 7 79. 08 φ80 hole Piping and Wiring intake 4 4 4 30 or more 0 or more (Required space) (Required space) 8 9 2 3 0 or more Piping direction 200 Name plate Note)2 Piping direction 0 or more (Requred space) (Requred space) 200 or more For installation in high spaces 20 or less 4. 3. Outside line φ80 hole Approx.400 89 Approx.40 Mounting location 4 Approx.4 Notes: Location of unit's of Name Plate:Right side surface of casing 2 In case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote contorller in detail. 3 Please do not place the thing been damp and troubled under an indoor unit. when the case where humidity is 80% or more, and the drain outlet are choked up and the air filter are dirty, dew may fall. Front panel 2 Front grill 3 Air outlet 4 Gas piping Liquid piping Drain hose 7 Earth terminal 8 Right side piping connection hole 9 Left side piping connection hole 2
DIMENSIONS (Unit: mm) OUTDOOR UNIT // RZQ0KBV4A, 0KBV4A, 7KCV4A Hole for anchor bolt 4-M2 770 30 OUTDOOR UNIT // RZQ00KCV4A, 2KCV4A, 40KCV4A Hole for anchor bolt 4-M2 30 (34~3) 94 43 30 20 40 900 3 4 2 70 7 7 7 89 8 8 0 8.4 7 0 422 423 40 02 43 30 (34~3) 320 30 30 40 4 94 20 40 900 3 4 2 7 7 39.4 28 8 89 0 339 34 4 9 4 9 84 8 223 3 9 89 9 9 80 2 42 4 3 7 7 70 4 37 9 Gas piping connection 2 Liquid piping connection 3 Service port 4 Earth terminal M (in switch box) Refrigerant piping intake Power supply wiring intake 7 Transmission wiring intake 8 Drain piping connection 44 22 320 30 40 30 8 4 42 9 7 4 4 9 8 38. 4 9 2 48 7 02 70 4 37 9 42 2 Gas piping connection 2 Liquid piping connection 3 Service port 4 Earth terminal Refrigerant piping intake Power supply wiring intake 7 Transmission wiring intake 8 Drain piping connection 27
OUTDOOR UNIT // RZQ00HAY4A, 2HAY4A, 40HAY4A Hole for anchor bolt 4-M2 (Pitch of foundation bolt holes) 30 (34~3) 38 3 30 320 30 9 40 20 40 (Pitch of foundation bolt holes) 30 900 3 4 2 34 7 7 7 24 89 4 4 3 84 9 9 223 9 0 4 43 89 9 9 80 2 8 42 4 3 7 7 7 02 7 4 37 9 8 Gas piping connection 2 Liquid piping connection 3 Service port 4 Earth terminal M (in switch box) Refrigerant piping intake Power supply wiring intake 7 Transmission wiring intake 8 Drain piping connection 28
DIMENSIONS (Unit: mm) REMOTE CONTROLLER Wireless type Remote controller dimensions Transmitting part Remote controller holder installation procedure <installation to wall surface> CEILING MOUNTED CASSETTE TYPE <Round Flow> Receiver installation procedure Refrigerant piping side Receiver Receiver detail 7 2 7. Liquid crystal remote controller (wireless) Remote controller holder Drain piping side Decoration panel CEILING SUSPENDED TYPE Receiver installation procedure WALL MOUNTED TYPE Receiver installation procedure FHQ7-2BVVB The Front Receiver FHQ40CAVEA The Front Receiver Receiver Receiver detail Receiver detail Receiver detail Wired type Remote controller dimensions BRCE2 Upper case Lower case Installation method A Exposed cord Top left outlet Top center outlet Staple B Embedded cord 9 C Embedded cord (use switch box) Condit 9 20 Operation lamp (Green) 42 40 40 84 84 84 20 9 X7 oblong hole 28 23 48. 4 Code outlet hole X oblong hole Left outlet 9 48. Lower case portion Note)2 Through hole ( 8-0) Note). Remote controller cord and staple are not attached. They are field supplied parts. Specifications of cord 28 4 Switch box for one switch Switch box for two switch ex.) KJBA ex.) KJB2A (optional accessory) (optional accessory) Lower case portion 0~ (Between remote controller and control box) Switch box [field supplied part] 2.If the hole size is too large or the location is not proper, the hole may come out from the remote controller. Type Vinyl cord with sheath or cable (insulated thickness: mm or more) Size 0.7~.2 mm 2 Total length 00 m 29
Installation service space for outdoor unit For RZQ0/0KBV4A, RZQ7KC-40KCV4A, RZQ00-40HAY4A The values represent the case for the RZQ00-40KCV4A and RZQ00-40HAY4A. The dimensions in ( ) are for the RZQ0/0KBV4A and RZQ7KCV4A (The unit values is mm. ) When there is an obstruction on the inlet side 2 When there is an obstruction on the outlet side ) When the overhead space is open. For single unit installation ) When the overhead space is open. For single unit installation When there is an obstruction only on the inlet side When there are obstructions on both sides 00(0) or more 2. For series installation (more than two units) 00 or more 00 or more 00 or more 2. For series installation (more than two units) When there are obstructions on both sides 00 or more 00 or more 000 or more 200 or more 00 or more 00 or more 00 or more 2) When there is an obstruction in the overhead space. For single unit installation An obstruction in the overhead space 000 or more 00 or less 000 or more 2) When there is an obstruction in the overhead space. For single unit installation When there is an obstruction on the inlet side An obstruction in the overhead space When there are obstructions on the inlet side and both lateral sides An obstruction in the overhead space 00 or less 0 or more 0 or more 00 or less 2. For series installation (more than two units) 300(200) or more 000 or more 00 or more 000 or more 0 or more 3 2. For series installation (more than two units) An obstruction in the overhead space. For single unit installation 00 or more L 00 or more 00 or less 000 or more When there are obstructions on both the inlet and outlet sides (When the obstruction on the outlet side is higher than the unit itself) 000 or more 00 or more ) When the overhead space is open (There is no limit to the height of the obstruction on the outlet side.) H When there are obstructions on the inlet side and both lateral sides 00 or more 000 or more 200 or more An obstruction in the overhead space 00 or less 000 or more 00 or more 2. For series installation (more than two units) L H 00 or more 00(0) or more 00 or more 00 or more L H 300(200) or more L H 000 or more 300(200) or more Note : As for other patterns of installation, please refer to Installation manual or Engineering Data Book. 30
Warning Ask a qualified installer or contractor to install this product. Do not try to install the product by yourself. Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion. Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or contractor to install those parts and accessories. Use of unauthorised parts and accessories or improper installation of parts and accessories can result in water or refrigerant leakage, electrical shock, fire or explosion. Read the User's Manual carefully before using this product. The User's Manual provides important safety instructions and warnings. Be sure to follow these instructions and warnings. If you have any enquiries, please contact your local importer, distributor and/or retailer. Cautions on product corrosion. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced. 2. If the outdoor unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided. If you need to install the outdoor unit close to the sea shore, contact your local distributor. JMI-007 Organization: DAIKIN INDUSTRIES, LTD. AIR CONDITIONING MANUFACTURING DIVISION Scope of Registration: The design/development and manufacture of commercial air conditioning, heating, cooling, refrigerating equipment, heating equipment, residential air conditioning equipment, heat reclaim ventilation, air cleaning equipment, compressors and valves. JQA-42 Organization: DAIKIN INDUSTRIES (THAILAND) LTD. Scope of Registration: The design / development and manufacture of air conditioners and the components including compressors used for them Quality ISO 900 Daikin Australia Pty Limited (ISO900) QEC232 May 2, 200 Sydney, Brisbane, Adelaide, Melbourne, Newcastle, Townsville, Perth, Auckland All of the Daikin Group s business facilities and subsidiaries in Japan are certified under the ISO 400 international standard for environment management. Environment ISO 400 Daikin Australia Pty Limited (ISO400) CEM20437 October 27, 200 Sydney, Brisbane, Melbourne, Adelaide, Perth DEALER: Daikin Australia Pty Limited ABN 2 000 72 97 Email: commercial@daikin.com.au Phone: 300 38 300 (AU) Phone: 0800 324 4 (NZ) commercial.daikin.com.au Specifications, designs and other content appearing in this brochure are current as of September 203 but subject to change without notice. c All rights reserved 09/3 SS