4" SUBMERSIBLE PUMPS

4" SUBMERSIBLE PUMPS

4" SUBMERSIBLE PUMPS 50/60 HZ

Multi-stage centrifugal submersible pumps for clean water in 4" wells. The 4" VSP pump series is carefully designed and manufactured for maximum resistant against sand and other impurities providing a long life and trouble free operations. The Floating Impeller design ensures an excellent rasistance to wear and tear against sand and other impurities. The Discharge Head and Motor Adapter are made of precision-cast stainless steel ensuring maximum rasistance to corrosion, strength and rigid coupling to the motor. The Non-Return Valve is integrated in the head to support the weight of the water column and to protect against water hammer, thus safeguarding impellers and diffusers. 3 Capacity up to 25 m /h Rated motor power output up to.5 KW Maximum water temperature from 0 C to 35 C Maximum overall diameter of the pump inclusive of cable guard is 9.5 mm 3 Maximum permissible quantity of suspended sand of 150g/m Radial and mixed flow impeller Delivery port - 1.25", 1.5", 2"

Features Powered for Continuous Operation. All ratings are within the working limits of the motor. Pump can be operated continuously without damage to the motor. Field Serviceable. Pump can be rabuilt in the field to like new condition with common tools and readily available spare parts. The pump is designed with left hand casing threads. Sand Resistant Construction. Field proven over almost four decades, face clearance design and floating impellers for an extremely abrasion resistant configuration. www.vansan.com.tr Stainless Steel Metal Parts. Bowls, Casing, Discharge head, Motor Adapter, Shaft, Coupling, Bushings, Cable Guard, Strainer. Check Valve are constructed of a corrosion resistant, non-toxic and non-leaching stainless steel. 2-3 FDA Compliant Non-Metallic Parts. Impellers, Diffusers and Bearing Spiders are constructed of a glass filled engineered composite. This material is corrosion resistant and non-toxic. Discharge Head. High profile precision cast stainless steel for superior strength and durability. Cast in loop for safety line. Motor Adapter. Precision cast stainless steel is extremely rigid for accurate alignment of wet end to motor. Generous space for removal of motor mounting nuts with regular open-end wrench. Bowls. Stainless steel for superior strength and abrasive resistance. Built in Check Valve. Built in check valve constructed of stainless steel and low compression, FDA compliant, BUNA rubber for excellent abrasive resistance and quiet, efficient operation. Urethane Upper and Intermediate Bearings. Fluted design for free passage of abrasives and excellent resistance to sand damage. Stainless Steel Casing. Polished stainless steel is attractive and durable in the most corrosive water. Hex Shaft Design. Six sided shafts for positive impeller drive. Shaft Coupling. Exposed for ease of field alignment to motor shaft and to check pump rotation. Strainer. Non collapsible stainless steel with generous water passage for maximum design flow.

Product Code System V S P S N 0 4 0 3 / 0 5 Number of stages Impeller Type (1, 2, 3...) Nominal diameter (04: 4 inch) Material of impeller (n: noryl) Material of wearbox (s: stainless steel) Pump type (VSP: Vansan submersible pump) Part List No Part Name Material 1 2 3 4 5 6 8 9 10 11 12 13 14 15 16 1 18 19 20 21 22 23 24 25 Top Bracket Valve Cap Valve Seat Retainer Valve Seat Valve Locking Ring Adapter Ring Top Bushing Top Bearing Top Diffuser Diffuser Impeller Wear Box Shim Suction Case Filter O-ring Coupling Shaft Clip Ring Shim Jacket Pipe Cable Guard Nut Gasket Strap Stainless Steel Stainless Steel Rubber Stainless Steel Stainless Steel Noryl Stainless Steel Polyurethane Noryl Noryl Noryl Stainless Steel Stainless Steel Stainless Steel Stainless Steel Rubber Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel

Technical Drawing www.vansan.com.tr 4-5

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

www.vansan.com.tr 6 - VSP SN 401 (50HZ) No. of vanes Outlet connection diameter (inside threaded) 1 ¼" Pump outside diameter 95 mm Capacity 3 1,5-3,6 m /h Delivery head 194-30 mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

52 VSP SN 402 40 28 www.vansan.com.tr 20 8-9 14 10 5 VSP SN 402 (50HZ) No. of vanes Outlet connection diameter (inside threaded) 1 ¼" Pump outside diameter 95 mm Capacity 3 1,5-3,6 m /h Delivery head 194-30 mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

VSP SN 403 32 21 www.vansan.com.tr 16 10-11 11 8 5 VSP SN 403 (50HZ) No. of vanes Outlet connection diameter (inside threaded) 1 ¼" Pump outside diameter 95 mm Capacity 3 1,5-3,6 m /h Delivery head 194-30 mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

VSP SN 404 48 44 35 2 www.vansan.com.tr 18 12-13 14 9 5 VSP SN 404 (50HZ) No. of vanes Outlet connection diameter (inside threaded) 1 ¼" Pump outside diameter 95 mm Capacity 3 1,5-3,6 m /h Delivery head 194-30 mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

VSP SN 405 44 40 32 www.vansan.com.tr 24 14-15 16 12 8 6 4 VSP SN 405 (50HZ) No. of vanes Outlet connection diameter (inside threaded) 1 ½" Pump outside diameter 95 mm Capacity 3 2,-6,0 m /h Delivery head 238 - mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

VSP SN 406 49 36 34 2 www.vansan.com.tr 20 16-1 14 10 VSP SN 406 (50HZ) No. of vanes Outlet connection diameter (inside threaded) 1 ½" Pump outside diameter 95 mm Capacity 3 2,-6,0 m /h Delivery head 238 - mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

www.vansan.com.tr 18-19 VSP SN 408 (50HZ) No. of vanes Outlet connection diameter (inside threaded) 2" Pump outside diameter 95 mm Capacity 3 5,4-12 m /h Delivery head 18-12 mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

26 VSP SN 412 19 1 14 www.vansan.com.tr 10 20-21 VSP SN 412 (50HZ) No. of vanes 6 Outlet connection diameter (inside threaded) 2" Pump outside diameter 95 mm Capacity 3 8,4-16 m /h Delivery head 180-14 mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

VSP SN 416 20 15 13 11 www.vansan.com.tr 8 22-23 VSP SN 416 (50HZ) No. of vanes Outlet connection diameter (inside threaded) 2" Pump outside diameter 95 mm Capacity 3 12-19 m /h Delivery head 114-22 mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

VSP SN 402A 42 34 2 www.vansan.com.tr 20 1 24-25 12 10 5 VSP SN 402A (60HZ) No. of vanes Outlet connection diameter (inside threaded) 1 ¼" Pump outside diameter 95 mm Capacity 3 1,5-3,6 m /h Delivery head 194-30 mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

VSP SN 403A 35 28 21 www.vansan.com.tr 1 26-2 12 10 5 VSP SN 403A (60HZ) No. of vanes Outlet connection diameter (inside threaded) 1 ¼" Pump outside diameter 95 mm Capacity 3 1,5-3,6 m /h Delivery head 194-30 mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

30 VSP SN 404A 25 19 www.vansan.com.tr 14 11 28-29 8 6 5 VSP SN 404A (60HZ) No. of vanes Outlet connection diameter (inside threaded) 1 ¼" Pump outside diameter 95 mm Capacity 3 1,5-3,6 m /h Delivery head 194-30 mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

VSP SN 405A 26 20 15 www.vansan.com.tr 11 9 30-31 5 4 VSP SN 405A (60HZ) No. of vanes Outlet connection diameter (inside threaded) 1 ½" Pump outside diameter 95 mm Capacity 3 2,-6,0 m /h Delivery head 238 - mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

43 VSP SN 406A 34 24 22 www.vansan.com.tr 18 14 32-33 10 8 6 VSP SN 406A (60HZ) No. of vanes Outlet connection diameter (inside threaded) 1 ½" Pump outside diameter 95 mm Capacity 3 2,-6,0 m /h Delivery head 238 - mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

VSP SN 408A 21 15 14 11 www.vansan.com.tr 8 34-35 6 5 VSP SN 408A (60HZ) No. of vanes Outlet connection diameter (inside threaded) 2" Pump outside diameter 95 mm Capacity 3 5,4-12 m /h Delivery head 18-12 mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

VSP SN 412A 1 12 11 9 www.vansan.com.tr 36-3 5 4 VSP SN 412A (60HZ) No. of vanes 6 Outlet connection diameter (inside threaded) 2" Pump outside diameter 95 mm Capacity 3 8,4-16 m /h Delivery head 180-14 mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Technical Specifications Diffuser Top Diffuser Impeller Pump shaft : Stainless steel (AISI 304) Coupling : Stainless steel (AISI 304) Suction case : Stainless steel (AISI 304) Strainer : Stainless steel (AISI 304) Top bracket : Stainless steel (AISI 304) Valve cap : Stainless steel (AISI 304) Wear box : Stainless steel (AISI 304) Rotation Revolution : CCW : 2.900 rpm Performance Curves

VSP SN 416A 14 10 9 www.vansan.com.tr 38-39 5 VSP SN 416A (60HZ) No. of vanes Outlet connection diameter (inside threaded) 2" Pump outside diameter 95 mm Capacity 3 12-19 m /h Delivery head 114-22 mt Shaft diameter (Hexagonal) 11 mm The hydraulic working characteristics have been taken with water at 15 C, at the atmoshperical pressure of 1 bar and specific gravity is 1 gr/cm3

Pump Type Stages Motor m 3 /h kw HP I/min VSP SN 403 / 08 VSP SN 403 / 11 VSP SN 403 / 16 VSP SN 403 / 21 VSP SN 403 / 32 8 11 16 21 32 0.55 0.5 1.1 1.5 2.2 0.5 1.0 1.5 2.0 3.0 VSP SN 405 / 0 VSP SN 405 / 09 VSP SN 405 / 14 VSP SN 405 / 18 VSP SN 405 / 2 VSP SN 405 / 35 VSP SN 405 / 44 9 14 18 2 35 44 0.55 0.5 1.1 1.5 2.2 3.0 3. 0.5 1.0 1.5 2.0 3.0 4.0 5.0 VSP SN 408 / 04 VSP SN 408 / 06 VSP SN 408 / 08 VSP SN 408 / 13 VSP SN 408 / 1 VSP SN 408 / 23 VSP SN 408 / 32 4 6 8 13 1 23 32 0.5 1.1 1.5 2.2 3.0 4.0 5.5 1.0 1.5 2.0 3.0 4.0 5.5.5 VSP SN 412 / 0 VSP SN 412 / 10 VSP SN 412 / 14 VSP SN 412 / 19 VSP SN 412 / 26 VSP SN 412 / 38 10 14 19 26 38 1.5 2.2 3.3 4.0 5.5.5 2.0 3.0 4.0 5.5.5 10 VSP SN 416 / 08 VSP SN 416 / 11 VSP SN 416 / 15 VSP SN 416 / 20 VSP SN 416 / 26 8 11 15 20 26 2.2 3.0 4.0 5.5.5 3.0 4.0 5.5.5 10 1,5 1,8 2,1 2,4 2, 3,0 3,6 4,2 4,8 5,4 6,0,2 8,4 9,6 10,8 12 13 14,4 16 1 18 19 25 30 35 40 45 50 60 0 80 90 100 120 140 160 180 200 220 240 260 280 300 320 50 66 98 132 194 49 64 95 12 18 46 61 89 122 1 43 58 83 115 165 41 54 108 152 38 49 0 100 138 30 38 54 9 104 39 49 9 102 14 196 238 3 4 6 98 141 189 229 33 43 68 88 12 10 203 28 3 58 5 109 149 12 21 28 4 60 8 120 139 13 20 33 42 61 8 100 10 20 25 35 50 59 23 35 4 3 96 131 18 22 34 46 1 94 12 12 21 32 43 66 8 118 160 19 29 39 59 9 108 143 1 26 35 50 0 95 125 15 22 29 40 58 9 105 12 1 24 30 46 60 80 33 48 6 91 120 180 31 44 62 89 111 169 28 41 56 6 100 153 25 36 49 68 8 136 22 32 43 58 5 121 18 26 35 48 61 99 14 20 28 3 48 35 49 69 89 114 33 4 66 84 108 31 44 63 9 102 29 41 58 4 91 2 38 54 0 8 24 34 50 65 82 22 31 46 60 Head (m)

B.T.20131108-OEM-V1/B1