FASTLOCK fittings are not currently approved for use with gas or fire protection applications. FITTINGS FOR STEEL PIPE LIST PRICE BOOK MALLEABLE CAST IRON FITTINGS FOR SCH. 10 40 BLACK & GALVANIZED STEEL PIPE Phone: 877.228.9246 Fax: 877.232.9246 E-mail: info@cimberiovalve.com www.fastlockfittings.com MKT-23_v3 Prices Effective 01/1/2012
FITTINGS FOR STEEL PIPE THE QUICKEST & EASIEST WAY TO CONNECT STEEL PIPE Tabs EPDM Gasket FASTLOCK fittings provide the quickest and easiest way to connect schedules 10 through 40 black and galvanized ASTM A53 compliant steel pipe. FASTLOCK fittings are available in a complete range of sizes from ½" 2". FASTLOCK fittings install without the use of threading dies, pipe sealants, or pipe wrenches; significantly reducing average installation time, saving time and money. Because they connect without wrenches, FAST- LOCK fittings reduce stress on joists and hangers during installation. FASTLOCK press Jaws have an integral indent feature to ensure fast recognition of pressed valves prior to pressure testing. FASTLOCK press jaws are compatible with most press tools on the market, including Ridgid, Rothenberger, REMS, and Stanley VIRAX. FASTLOCK fittings feature a specialized, corrosion-resistant, malleable cast iron body with stainless steel fastening rings and EPDM sealing gaskets. Applications include water, HVAC, and compressed air systems. ISO Certified, IAPMO Approved, NSF 61-4 Certified Stainless Steel Gripping Ring Before Press Connection Pressing Area EPDM Gasket 316 Stainless Steel Ring ASTM A53 Steel Pipe Zinc Coating Stop Malleable Cast Iron Body FASTLOCK fittings are made from malleable cast iron. The annealing process used in their manufacturing provides them with a greater malleability well suited for press connections. During manufacturing, all FASTLOCK fittings are hot-dipped in 99.99% pure, molten zinc. This process completely coats the fittings surface inside and outside, giving them additional strength and providing a resistance to oxide corrosion, making them excellent for use in drinking water systems. FASTLOCK fittings ensure a tightly sealed connection utilizing a pre-assembled sealing gasket and stainless steel gripping ring. The thick EPDM sealing gasket provides a wide contact surface between the fitting and the pipe, ensuring the connection is air and water tight after pressing. The AISI 316L stainless steel ring grips the pipe and prevents it from pulling out, even in cases of very high pressure. Tabs on the fitting end retain the sealing gasket and stainless steel gripping ring. The diagram below illustrates how all of these features provide FASTLOCK fittings with a strong and secure press connection. After Press Connection EPDM Gasket Pressing Area 316 Stainless Steel Ring ASTM A53 Steel Pipe Pipes for FASTLOCK FASTLOCK fittings are for use with ASTM A53 compliant ½" 2" schedule 10 through schedule 40 black and galvanized steel pipe only. Press Tools for FASTLOCK FASTLOCK fittings must be used with FASTLOCK approved press jaws only. FASTLOCK jaws are compatible with press tools from Ridgid, Rothenberger, REMS, and Stanley VIRAX. The press tool must be for sizes up to 2" with a press force of at least 32kN and operating either at 110 volts or on battery power. Operating Parameters Operating Temperature: 0 250 F Maximum Operating Pressure: 200 PSI Warranty FASTLOCK fittings carry a 50 year limited warranty against defects in material and workmanship when properly installed and used under normal circumstances. Approvals ISO 9001:2000 Certified IAPMO Approved: Uniform Plumbing Code NSF-61-4 Certified
FITTINGS FOR STEEL PIPE QUICK & EASY INSTALLATION 1 2 Verify the outside diameter of the pipe is compliant to ASTM A53 standards. Cut the pipe perpendicular to its axis. 4 3 Deburr the end of the pipe to avoid damaging the gasket. Make sure the pipe is free of debris, rust, paint, scale, etc. 5 ark the insertion depth on the pipe. M Insert the pipe into the fitting until it makes contact with the stop. Verify the presence, integrity and correct positioning of the gasket and metal ring. If necessary, lubricate the pipe and fitting with approved silicone spray. 6 Complete the press connection using FASTLOCK jaws in accordance with your press tool s instructions. Verify the press connection. NOTE: Connections MUST be made on ASTM A53 compliant pipe using FASTLOCK approved jaws ONLY. The instructions above are provided as a brief overview of the installation process. Before using any FASTLOCK products, read the complete Technical Manual. Complete installation instructions can be found in the Technical Manual or at www.fastlockfittings.com ORDERING INFORMATION FASTLOCK fittings are available from Cimberio Valve Company, Inc. Freight Policy: Cimberio Valve standard freight terms apply to all orders placed for delivery to a single destination in the continental United States. Contact your local distributor for specific details. Otherwise, freight items are F.O.B. Malvern, Pennsylvania 19355. To read Cimberio Valve s complete freight policy, visit us online at www.cimberiovalve.com and click on the Policies link at the bottom of the page. Order Acceptance: Orders are accepted by fax (877-232-9246) or e-mail (orders@cimberiovalve.com). Possession of any of our catalogs or list price books by any person is not to be construed as an offer to sell to that person. All prices are subject to change without notice. Minimum Order: There is NO minimum order at Cimberio Valve. Payment Terms: All invoice terms are Net 30 from the date of Cimberio Valve invoices. Invoices may now be paid by credit card. Cimberio Valve accepts Visa, MasterCard, and Discover. Before paying by credit card you must fax a completed Credit Card Authorization Form to us at 877-232-9246. This form can be downloaded from www.cimberiovalve.com on the Policies page (the link appears on the bottom of the page) or you can request the form by phone at 877-228-9246. FASTLOCK Fittings Are Available Through Wholesalers Only
FITTINGS FOR STEEL PIPE Press: Female Press Socket Joint P.E.: Male Plain End MIPT: Male Iron Pipe Thread FIPT: Female Iron Pipe Thread FASTLOCK Tools Part No. Description Price VALBFKIT01 ½" 1" Kit (Includes: ½" Jaws, ¾" Jaws, 1" Jaws, Pipe Gauge, Pipe Deburrer, and Carrying Case) $696.38 53463-8641 ½" Jaws Only $172.80 53463-8651 ¾" Jaws Only $209.09 53463-8661 1" Jaws Only $212.54 VALBFKIT02 1¼" 2" Kit (Includes: 1¼" Collar, 1½" Collar, 2" Collar, 1¼" 2" Actuator, Pipe Gauge, Pipe Deburrer, and Carrying Case) $4,222.21 53463-8680 1¼" 2" Actuator Only $200.45 53463-8671 1¼" Collar Only $1,251.07 53463-8681 1½" Collar Only $1,258.24 53463-8691 2" Collar Only $1,301.18 53105-0105 Pipe Deburrer Only $59.73 FASTLOCK FITTINGS Item No. 90 90 Elbow: Press x Press ½" 90BLK-04 $6.46 90HDG-04 $7.04 80 ¾" 90BLK-06 $8.52 90HDG-06 $9.29 50 1" 90BLK-07 $12.96 90HDG-07 $14.13 30 1¼" 90BLK-08 $22.10 90HDG-08 $23.62 20 1½" 90BLK-09 $32.16 90HDG-09 $33.39 15 2" 90BLK-10 $52.56 90HDG-10 $54.58 8 ACTUATOR PIPE DEBURRER ½ ¾ 1 ½" JAWS ¾" JAWS 1" JAWS 1¼ 1½ 2 1¼" COLLAR 1½" COLLAR 2" COLLAR Item No. 130 Tee: Press Run x Press Branch ½" 130BLK-04 $8.37 130HDG-04 $9.12 50 ¾" 130BLK-06 $12.27 130HDG-06 $13.37 30 1" 130BLK-07 $16.01 130HDG-07 $17.45 20 1¼" 130BLK-08 $30.79 130HDG-08 $32.91 10 1½" 130BLK-09 $43.25 130HDG-09 $44.90 8 2" 130BLK-10 $58.24 130HDG-10 $60.46 5 Contractors Earn Points Towards FREE FASTLOCK Products with the Get To The Point Program! Visit www.fastlockfittings.com for more information.
FITTINGS FOR STEEL PIPE Press: Female Press Socket Joint P.E.: Male Plain End MIPT: Male Iron Pipe Thread FIPT: Female Iron Pipe Thread FASTLOCK FITTINGS Item No. 133 Tee - Reducing: Press Run x Reduced Press Branch This item is currently in production and may be supplied as a 130 Tee and 247 Adapter if fitting is unavailable. (Run x Branch) REDUCED ¾" x ½" 133BLK-0604 $11.58 133HDG-0604 $12.76 30 1" x ½" 133BLK-0704 $16.45 133HDG-0704 $18.12 20 1" x ¾" 133BLK-0706 $14.46 133HDG-0706 $18.12 20 1¼" x ½" 133BLK-0804 $22.83 133HDG-0804 $25.11 10 1¼" x ¾" 133BLK-0806 $24.45 133HDG-0806 $26.89 10 1¼" x 1" 133BLK-0807 $25.48 133HDG-0807 $28.05 10 1½" x ½" 133BLK-0904 $38.90 133HDG-0904 $42.78 8 1½" x ¾" 133BLK-0906 $36.68 133HDG-0906 $40.35 8 1½" x 1" 133BLK-0907 $37.96 133HDG-0907 $41.76 8 1½" x 1¼" 133BLK-0908 $40.52 133HDG-0908 $44.57 8 2" x ½" 133BLK-1004 $63.10 133HDG-1004 $69.39 5 2" x ¾" 133BLK-1006 $61.97 133HDG-1006 $68.19 5 2" x 1" 133BLK-1007 $65.20 133HDG-1007 $71.72 5 2" x 1¼" 133BLK-1008 $67.52 133HDG-1008 $74.26 5 2" x 1½" 133BLK-1009 $68.45 133HDG-1009 $75.30 5 Item No. 271 Slip Coupling: Press x Press Item No. 272 Coupling: Press x FIPT SLIP ½" 271BLK-04 $7.15 271HDG-04 $7.79 100 ¾" 271BLK-06 $9.67 271HDG-06 $10.54 70 1" 271BLK-07 $12.80 271HDG-07 $14.23 50 1¼" 271BLK-08 $16.45 271HDG-08 $18.46 30 1½" 271BLK-09 $23.60 271HDG-09 $26.95 20 2" 271BLK-10 $29.19 271HDG-10 $33.34 10 FEMALE THREAD ½" 272BLK-04 $11.66 272HDG-04 $12.71 100 ¾" 272BLK-06 $13.51 272HDG-06 $14.73 70 1" 272BLK-07 $21.60 272HDG-07 $23.55 50 1¼" 272BLK-08 $32.97 272HDG-08 $35.94 30 1½" 272BLK-09 $50.58 272HDG-09 $55.13 20 2" 272BLK-10 $69.48 272HDG-10 $75.74 10 MALE THREAD Item No. 270 Coupling: Press x Press ½" 270BLK-04 $4.36 270HDG-04 $4.75 100 ¾" 270BLK-06 $6.38 270HDG-06 $6.96 70 1" 270BLK-07 $8.93 270HDG-07 $9.74 50 1¼" 270BLK-08 $15.56 270HDG-08 $16.95 30 1½" 270BLK-09 $17.70 270HDG-09 $19.30 20 2" 270BLK-10 $26.49 270HDG-10 $28.86 10 Item No. 274 Coupling: Press x MIPT This item is currently in production and may be supplied as a 270 Coupling and 240 Adapter if fitting is unavailable. ½" 274BLK-04 $8.25 274HDG-04 $8.41 70 ¾" 274BLK-06 $13.93 274HDG-06 $14.18 50 1" 274BLK-07 $22.26 274HDG-07 $22.71 40 1¼" 274BLK-08 $30.71 274HDG-08 $31.32 30 1½" 274BLK-09 $32.94 274HDG-09 $33.59 20 2" 274BLK-10 $41.60 274HDG-10 $42.41 10
FITTINGS FOR STEEL PIPE Press: Female Press Socket Joint P.E.: Male Plain End MIPT: Male Iron Pipe Thread FIPT: Female Iron Pipe Thread FASTLOCK FITTINGS Item No. 240 Adapter: P.E. x MIPT MALE PLAIN END MALE THREAD Item No. 529 Adapter: FIPT x P.E. FEMALE THREAD MALE PLAIN END ½" 240BLK-04 $4.59 240HDG-04 $5.00 100 ¾" 240BLK-06 $10.62 240HDG-06 $11.58 100 1" 240BLK-07 $15.25 240HDG-07 $16.62 100 1¼" 240BLK-08 $18.71 240HDG-08 $20.39 40 1½" 240BLK-09 $23.48 240HDG-09 $25.59 35 2" 240BLK-10 $29.84 240HDG-10 $32.54 15 ½" 529BLK-04 $7.26 529HDG-04 $7.91 100 ¾" 529BLK-06 $11.27 529HDG-06 $12.29 100 1" 529BLK-07 $15.25 529HDG-07 $16.62 100 1¼" 529BLK-08 $19.30 529HDG-08 $21.03 40 1½" 529BLK-09 $24.28 529HDG-09 $26.46 30 2" 529BLK-10 $34.06 529HDG-10 $37.11 15 REDUCED Item No. 276 Coupling - Reducing: Press x Reduced Press This item is currently in production and may be supplied as a 270 Coupling and 247 Adapter if fitting is unavailable. MALE PLAIN END (a) Item No. 247 Adapter: P.E. (a) x Reduced Press (b) REDUCED END (b) ¾" x ½" 276BLK-0604 $9.34 276HDG-0604 $10.28 50 1" x ½" 276BLK-0704 $9.77 276HDG-0704 $10.84 30 1" x ¾" 276BLK-0706 $10.20 276HDG-0706 $11.21 30 1¼" x ½" 276BLK-0804 $13.50 276HDG-0804 $14.98 20 1¼" x ¾" 276BLK-0806 $13.80 276HDG-0806 $15.32 20 1¼" x 1" 276BLK-0807 $14.50 276HDG-0807 $15.96 20 1½" x ½" 276BLK-0904 $17.33 276HDG-0904 $19.24 10 1½" x ¾" 276BLK-0906 $19.26 276HDG-0906 $21.38 10 1½" x 1" 276BLK-0907 $20.94 276HDG-0907 $23.24 10 1½" x 1¼" 276BLK-0908 $21.73 276HDG-0908 $23.93 10 2" x ½" 276BLK-1004 $22.09 276HDG-1004 $24.30 8 2" x ¾" 276BLK-1006 $22.87 276HDG-1006 $25.16 8 2" x 1" 276BLK-1007 $23.22 276HDG-1007 $25.54 8 2" x 1¼" 276BLK-1008 $23.97 276HDG-1008 $26.36 8 2" x 1½" 276BLK-1009 $24.29 276HDG-1009 $26.73 8 (a x b) ¾" x ½" 247BLK-0604 $9.42 247HDG-0604 $10.17 100 1" x ½" 247BLK-0704 $12.16 247HDG-0704 $13.13 70 1" x ¾" 247BLK-0706 $12.79 247HDG-0706 $13.81 70 1¼" x ½" 247BLK-0804 $20.26 247HDG-0804 $21.88 50 1¼" x ¾" 247BLK-0806 $21.26 247HDG-0806 $22.96 50 1¼" x 1" 247BLK-0807 $22.33 247HDG-0807 $24.11 50 1½" x ½" 247BLK-0904 $22.71 247HDG-0904 $24.53 50 1½" x ¾" 247BLK-0906 $23.83 247HDG-0906 $25.74 50 1½" x 1" 247BLK-0907 $25.03 247HDG-0907 $27.03 50 1½" x 1¼" 247BLK-0908 $36.49 247HDG-0908 $39.41 30 2" x ½" 247BLK-1004 $31.51 247HDG-1004 $34.03 30 2" x ¾" 247BLK-1006 $33.09 247HDG-1006 $35.73 30 2" x 1" 247BLK-1007 $34.75 247HDG-1007 $37.53 30 2" x 1¼" 247BLK-1008 $26.28 247HDG-1008 $28.38 20 2" x 1½" 247BLK-1009 $38.32 247HDG-1009 $41.39 20
FITTINGS FOR STEEL PIPE Press: Female Press Socket Joint P.E.: Male Plain End MIPT: Male Iron Pipe Thread FIPT: Female Iron Pipe Thread SPECIAL ORDER FASTLOCK FITTINGS MALE PLAIN END FEMALE THREAD Item No. 91 90 Elbow: Press x P.E. Item No. 93 90 Elbow: Press x FIPT ½" 91BLK-04 $8.71 91HDG-04 $9.49 80 ¾" 91BLK-06 $11.95 91HDG-06 $13.03 40 1" 91BLK-07 $17.67 91HDG-07 $19.26 30 1¼" 91BLK-08 $30.06 91HDG-08 $32.12 20 1½" 91BLK-09 $41.03 91HDG-09 $42.60 15 2" 91BLK-10 $60.29 91HDG-10 $62.60 8 ½" 93BLK-04 $8.90 93HDG-04 $9.70 80 ¾" 93BLK-06 $13.87 93HDG-06 $15.12 50 1" 93BLK-07 $21.87 93HDG-07 $23.84 30 1¼" 93BLK-08 $36.05 93HDG-08 $38.52 20 1½" 93BLK-09 $50.82 93HDG-09 $52.76 15 2" 93BLK-10 $70.04 93HDG-10 $72.72 8 MALE THREAD REDUCED FEMALE THREAD Item No. 92 90 Elbow: Press x MIPT Item No. 131 Tee - Reducing: Press Run x Reduced FIPT Branch This item is currently in production and may be supplied as a 130 Tee and 243 Adapter if fitting is unavailable. ½" 92BLK-04 $10.88 92HDG-04 $11.86 80 ¾" 92BLK-06 $14.94 92HDG-06 $16.29 40 1" 92BLK-07 $22.09 92HDG-07 $24.08 30 1¼" 92BLK-08 $37.58 92HDG-08 $40.15 20 1½" 92BLK-09 $51.30 92HDG-09 $53.25 15 2" 92BLK-10 $75.36 92HDG-10 $78.22 8 Items on this page (91, 92, 93, 131) are special stock quantity. Please contact a sales represenative for product availability. (Run x Branch) 1" x ½" 131BLK-0704 $22.38 131HDG-0704 $24.40 20 1¼" x ½" 131BLK-0804 $28.86 131HDG-0804 $31.46 10 1½" x ½" 131BLK-0904 $39.23 131HDG-0904 $43.17 8 1½" x ¾" 131BLK-0906 $40.95 131HDG-0906 $45.05 8 2" x ½" 131BLK-1004 $49.02 131HDG-1004 $53.93 5 2" x ¾" 131BLK-1006 $56.30 131HDG-1006 $61.93 5 ¾" x ½" 131BLK-0604 $15.60 131HDG-0604 $17.14 30 1" x ¾" 131BLK-0706 $24.98 131HDG-0706 $27.50 20 1¼" x ¾" 131BLK-0806 $30.24 131HDG-0806 $33.27 10 1¼" x 1" 131BLK-0807 $32.73 131HDG-0807 $36.01 10 1½" x 1" 131BLK-0907 $43.08 131HDG-0907 $47.39 8 1½" x 1¼" 131BLK-0908 $44.95 131HDG-0908 $49.43 8 2" x 1" 131BLK-1007 $61.21 131HDG-1007 $67.34 5 2" x 1¼" 131BLK-1008 $62.51 131HDG-1008 $68.77 5 2" x 1½" 131BLK-1009 $63.68 131HDG-1009 $70.06 5
INDUSTRIE METALLURGICHE SPOLETO SPA (IMS) warrants to wholesalers and licensed plumbing and mechanical contractors in the United States and Canada that: FASTLOCK Press System Fittings ( AFL trademark) will be free from defects in materials and workmanship when properly installed and used under normal conditions for a period of 50 years from installation. IMS is subject to the conditions and limitations contained in this warranty. Under this limited warranty, a claim can only be made if a manufacturing defect causes a leak or failure during the warranty period. This IMS warranty does not apply if a failure or any damage is caused by any of the following: 1. Products, parts or components not manufactured or sold by IMS. 2. Products not installed under recommended instructions (including but not limited to system design, installation, inspection or testing) provided by IMS or applicable code requirements. 3. Any damage caused in part or in whole by the following: a. Improper handling and protection of the product before, during or after installation. Including but not limited to misuse, abuse, tampering, neglect or accidental damage. b. Subjection to conditions outside acceptable operating ranges, including but not limited to temperature and pressure. c. Acts of nature or natural disasters including, but not limited to fire, earthquakes, floods or lightning. d. External environmental causes due to any external chemical or physical conditions, including but not limited to variation in water quality and aggressive water. e. Any cause out of the control of IMS. WARRANTY ON FASTLOCK PRODUCT In the event of a leak or failure the property owner must contact IMS within thirty (30) days of the failure and create a warranty claim. The property owner must remove the product with at least six inches of pipe on each end (where applicable) and mail it at their expense to IMS. It is the burden on the property owner to make and pay for any repairs. IMS will inspect and test the returned product and will notify the claim holder in writing in a reasonable amount of time the result of the diagnosis. If it is found that the failure or leak was caused by a defect in material or workmanship, IMS will be responsible for the replacement of the part and/or reimbursement or repair. IMS s liability under this warranty is limited ONLY to the repair and/or replacement of parts found to contain defect in material or workmanship. This does NOT include loss of business/profits, water damage, mold intrusion, etc... IMS is not liable for any other or consequential damage. This warranty is in lieu of all other warranties, expressed or implied, including but not limited to implied warranties of merchantability. This is the only warranty provided for the FASTLOCK product. No agent of IMS (employees, distributors or other person or business) is authorized to create or modify this or any warranty on behalf of the IMS. This limited warranty gives the product owner specific legal rights. The product owner may have other legal rights which vary from state to state. FITTINGS FOR STEEL PIPE From Cimberio Valve Phone: 877.228.9246 Fax: 877.232.9246 E-mail: info@cimberiovalve.com www.fastlockfittings.com