INNOVATIVE. ADAPTABLE. ENERGY EFFICIENT. awipanels.com
From freezing, sub-zero temperatures to Contents dry heat or high humidity, Mother Nature continually tests the limits of building envelopes. That's why All Weather Insulated Panels are specifically engineered to maintain interior climate control regardless of external weather conditions. Discover the wide range of panel colors, finishes, dimensions, Advantages 4 AdobeTexture TM Wall System 5 Profiled Wall Systems 6/7 Roof Systems 8 Roof Deck Systems 9 Specifications 10 About All Weather Insulated Panels 11 concealed fastening systems plus other options that will help you unleash your full design capabilities. 2
3
INNOVATIVE. ADAPTABLE. ENERGY EFFICIENT. E.P Senechal Center photos courtesy: Murdock & Boyd Architects St. John, NB All Weather Insulated Panels Today s building projects require the perfect combination of energy efficiency, creative versatility and construction efficiency. All Weather Insulated Panels are the ideal choice to deliver the superior thermal capabilities and building performance that eco-conscious builders, designers and owners demand. Advantages More Energy Efficient: Superior thermal insulation capabilities compared to other insulating materials Closed cell polyisocyanurate insulation and self-aligning, double inter-locking tongue and groove joints with concealed fasteners create an air- and water-tight seal to stabilize interior environments Single Component: Factory-injected insulation is continuously foamed-in-place and integrated with dual metal facing panels to create a single high strength unit Measureable Savings: Fast one-pass, single component installation eliminates the inefficiencies of multi-piece, field assembled wall and roof systems saving in installation time and labor costs Panels have high strength-to-weight ratio that allow for longer spans and reduce structural costs Versatile: Hidden fastener system with multiple profiles, colors, finishes, accessories and trims integrates into any building design Can be used in either vertical and horizontal applications Design vision is not compromised when doors, windows or other construction materials are incorporated into the design Sustainable: Minimum of 30% Recycled steel content 100% recyclable and reusable at the end of its service life Contribute to LEED credits and Net-Zero Energy targets Durable & Economical: Last as long as typical buildings Reduces operational costs and maintenance Tested & Approved: Tested for compliance with North American industry standards and codes Factory Mutual approved 4
ADOBETEXTURE WALL SYSTEM TM AdobeTextureTM wall panels offer a matte finish, multi-textured profile that simulates a precast or stucco-like appearance. Our unique proprietary process eliminates the need for additional factory- or field-applied stucco coatings offering an economical alternative that delivers superior adhesion and color retention when compared to other coating systems. Typical trim matching and finishing issues common to sprayed elastomeric applications (such as lengthly lead times) are also avoided due to our matching AdobeTextureTM Trim and Finishing System. AdobeTextureTM Proprietary breakthrough technology integrates a stucco look and texture into insulated wall panels Eliminates the need for sprayed elastomeric coating applications Eliminates multi-step field-applied or additional factory-applied stucco coating Matching AdobeTextureTM trim & finishing system for a clean, continuous look and feel No special storage or handling required Same easy, economical installation as standard IMP wall panels - Arrives on site in one piece for a simple one-step installation 25 year limited paint warranty against chalking, fading and loss of adhesion Standard Thicknesses: 2, 2.5, 3, 4 5
PROFILED WALL SYSTEMS Flat (FL40): Installed either horizontally or vertically, our Flat wall panels are produced with a smooth or standard embossed exterior face and are perfect for designers seeking a high-end architectural look with all the thermal benefits that insulated metal panels offer. The horizontal assembly incorporates a clean, simple end joint design that utilizes a unique self-aligning pre-painted aluminum extrusion. Standard Thicknesses: 2, 2.5, 3 FL40 also available in 36" width Flat Mesa (DM40): Our Mesa profile panel is an economical choice that is perfect for exterior / interior wall and ceiling applications on industrial and cold storage use buildings. The low profile linear exterior surface simplifies flashing connections designed to inhibit moisture vapor transmission compared with other deep fluted products offered on the market. The additional mesa profile on the interior face makes this panel particularly suited for thicker, long-length walls. Standard Thicknesses: 2, 2.5, 3, 4, 5, 6 Mesa 6
Striated (ST40): The Striated profile offers an extremely economical exterior or interior wall where a clean, flat appearance is desired. The nominal embossed striations add rigidity and ensure an acceptable flatness tolerance. Standard Thicknesses: 2, 2.5, 3, 4 ST40 also available in 36" width Striated Heavy Embossed (HE40): The distinctive pattern of our Heavy Embossed profile makes this panel ideal for exterior walls of industrial or commercial facilities where design character is desired. The heavy embossment adds rigidity to the surface and maintains a patterned flat appearance. The panel can be installed with a pre-painted finish or may be field sprayed with a textured or stucco-style elastomeric coating to create further character. Standard Thicknesses: 2, 2.5, 3, 4 Heavy Embossed 7
ROOF SYSTEMS Standing Seam (SR2): Get the look of a traditional metal standing seam roof with all the benefits of an insulated metal panel. Our Standing Seam roof profile offers a field seamed, hidden fastener joinery for maximum protection against the elements. The trapezoidal rib design provides added strength against potential foot traffic damage compared to other standing seam roof products. Because the joint design utilizes a rollformed steel base to support the attachment assembly, the thermally broken clip is only one piece. Standard Thicknesses: 3.25, 4, 5, 6 SR Roof Joint HR3 HR Series (HR3 & HR5): Available in 3 Rib and 5 Rib models, our HR Series roof panel is an economical solution to field assembled metal roofing. This panel installs quickly and easily by through fastening at the standing ribs into supporting structural members. The 5 Rib model provides for long span requirements and/or severe loading conditions. Standard Thicknesses: 2.5, 4, 5, 6 HR5 HR3 HR5 HR Roof Joint 8
ROOF DECK SYSTEMS Roof Deck (RD5): Our Roof Deck panel combines into a single component the steel deck, insulation and substrate necessary for white single ply membrane or non-structural standing seam roof coverings an economical alternative to rigorous and expensive field assembled roof deck systems. The top side substrate can be either primed steel or an approved flexible facer depending on the roof covering attachment requirements. Advantages: Allows for longer spans between supports A working platform during installation Superior deflection resistance Pre-painted white reflective interior Easier installation with fewer required trades Standard Thicknesses: 2.5, 4, 5, 6 9
Applications Cold Storage & Food Processing SPECIFICATIONS Testing & Approvals: All Weather Insulated Panels have been extensively tested under a variety of North American Standards to ensure compliance with various building codes and industry standards. FM 4880: Class 1 Fire Rating FM 4881: Class 1 Exterior Wall System CAN/ULC S102: Flame Spread CAN/ULC S101: Fire Endurance CAN/ULC S138: Fire Endurance CAN/ULC S127: Flammability CAN/ULC S126: Flame Spread (Roof) ASTM C518/C1363: Thermal Transmission ASTM E283: Air Infiltration ASTM E331: Water Infiltration ASTM E72: Structural Strength ASTM E84: Flame Spread ASTM E119: Fire Endurance AAMA 501.1: Air/Water Infiltration FM 4471: (Roof) CAN/ULC S134: Fire Test of Exterior Wall Assemblies 10 Industrial & Commercial
Commercial Institutional Advancing the North American insulated metal panel market. About ALL WEATHER Vicwest owned All Weather Insulated Panels has 3 state of the art continuous line manufacturing facilities including Vacaville, CA, Little Rock, AR and Hamilton, Ontario, Canada. All Weather Insulated Panels is an innovator in the design, construction and advancement of insulated metal panels and is strategically positioned to meet the growing energy, environmental and economic challenges facing the North American building industry. All Weather Insulated Panels provides its customers with a broad line of insulated wall and roof panels and a full range of complementary trims, accessories and engineering services. For more information, visit www.awipanels.com About VICWEST Headquartered in Oakville, Ontario, Vicwest is one of North America s leading manufacturers and distributors of exterior building products, including metal roofing, siding, decking, and architectural panels. Founded in 1905, Vicwest offers a wide and trusted range of products for the residential, industrial, commercial, institutional and agricultural construction markets. VICWEST has 13 manufacturing facilities with more than 800,000 square feet of operations strategically located throughout Canada and approximately 700 dedicated employees committed to providing quality products and excellent service to its North American customers. For more information, visit www.vicwest.com 11
Insulated Metal Panels All Weather Insulated Panels Committed to a sustainable environment. All Weather Insulated Panels is committed to the future and the environment. Our insulated metal panels are manufactured to deliver superior thermal capabilities designed to minimize the use of energy required in the heating and cooling of buildings. We manufacture using blowing agents that meet or exceed regulatory standards for the reduction of global warming potential (GWP) and our panels have zero ozone depleting potential (ODP) and do not produce volatile organic compounds (VOC). We also use recyclable materials to produce 100% recyclable products and incorporate finishes that are engineered to reduce the carbon footprint and maximize solar reflectance and thermal emissivity. All Weather Insulated Panels significantly contribute to credits toward LEED certification of a building. In accordance with ongoing efforts to improve our products and their performance, Vicwest and All Weather Insulated Panels reserve the right to change without notice the specifications contained herein. The contents herein are for general information and illustrative purposes only and are not intended to serve as any type of advice. Every effort is made to ensure the accuracy of the information included in this brochure and it is believed that the information contained herein is accurate and reliable as of the date of publication. Vicwest and All Weather Insulated Panels do not warrant or represent the accuracy or reliability of any information included in this brochure. Any reliance on any information without consultation with Vicwest, All Weather Insulated Panels or a duly authorized representative shall be at the user's own risk. Copyright 2013 Vicwest and All Weather Insulated Panels All rights reserved VW00185EN03/13 To locate a sales representative in your area, please visit our website (see below) Or call: U.S. 888 970-AWIP (2947) Canada 800 265-8553 awipanels.com