CELLMATE STOPS DEVICE THEFT ONCE AND FOR ALL

CELLMATE STOPS DEVICE THEFT ONCE AND FOR ALL

CELLMATE Security Products Stop thieves once and for all with CELLMATE brand security pedestals developed by Palmer; a leading manufacturer of wireless fixtures, displays, kiosks and security supplies for over a decade. Retail theft of expensive live display devices is a major issue facing wireless retailers. The cost of replacing devices and broken pedestals adds up quickly impacting ever narrowing margins and your store s bottom line. You don t have to be a victim, there s something you can do about it. Why yell Stop Thief! when CELLMATE does it for you. 2

Security Made Simple The CELLMATE and TabletVAULT line of security products developed by Palmer Retail Solutions provide exceptional security for live powered devices without expensive alarms or proprietary connectors. Simplicity of design, ease of use, durability and the ability to update the units for a fraction of what other devices cost are what make Palmer security products so special. The CELLMATE system consists of two parts: The CELLMATE, a permanent hardened steel holder The Cellblock, an updateable acrylic Cellblock machined to match the specific dimensions of each handheld device. The CELLMATE pedestal base need only be purchased once, while the economical acrylic Cellblocks can be updated as necessary to allow you to display the latest wireless devices. See the cellmate in action at: http://youtu.be/e-aazmlysra 3

CELLMATE Ease of Use CELLMATE security pedestals are a long lasting, updateable, and more reliable deterrent for theft of live devices. The concept is simple yet ultra secure. A replaceable scratch resistant acrylic block known as a Cellblock comes produced to each device s exact specifications. This Cellblock is loaded with a live device and inserted into the all steel pedestal. A steel cap is attached and locked with supplied security screws. An optional hardened steel bracket and padlock can be added for maximum security. The hardened steel base and solid acrylic block holder eliminate the need for embarrassing alarms and proprietary connectors. The holder also avoids the adhesive residue, marks, and scratches on live devices often caused by the use of retractors. Numerous base designs are available for fitting flat or angled display surfaces in a wide range of hole configurations to fit most pre-drilled countertops. Updating devices requires only the purchase of a new inexpensive acrylic Cellblock. Pulling devices for nightly storage or device replacement is accomplished with ease in less than a minute. Powering live devices is easy and no special cords are required. 4

Security Made Simple Powering Live Devices on Display Powering live devices is as simple as feeding the OEM or manufacturer s supplied charging cord from inside or under the display fixture where it receives power, up through the pedestal tube and into the handset. CELLMATE does not require a proprietary power cord or connector like other security pedestals. OEM and after market charging cords work great with CELLMATE. Plug charger that comes with device in through pre-cuthole in acrylic Run cord through slot in side of pedestal Run cord down through fixture to power source 5

CELLMATE Handset Security 6

Threaded Base Mount CELLMATE phone holder with threaded base mount fits any hole from 1 1/8 2 in diameter. An oversized threaded nut is screwed on by hand from inside or under the display surface locking the pedestal securely to the fixture. Threaded Base 1 1/8 D 2 D CELLMATE (Threaded Base) for Flat Surfaces Designed for use on fixtures with a level mounting surface. Steel face is fixed at 25 for optimal viewing. Item: PSPPP021 Price: $50.00 See page 12. CELLMATE (Threaded Base) for Angled Surfaces Designed for use on fixtures with a tilted or angled surface. Steel face is fixed parallel to the mounting surface. Item #: PSPPP022 Price: $50.00 See page 12. 7

Locking / Removeable CELLMATE Not all security threats happen during the day. In many crime prone areas, leaving expensive devices on display in the store over night is seen as an open invitation to break in. Under the cover of darkness, there s very little that can be done to stop a determined burglar. But, like the old saying goes, out of sight, out of mind. Designed for nightly removal the locking column CELLMATE features a quick release mount. Devices can be removed in seconds with a key and locked in a store safe or taken home leaving only empty bases visible. 8

Locking / Removeable CELLMATE Threaded Base Mount 1 1/8 D 2 D Locking Column CELLMATE (Threaded Base) for Flat Surfaces Designed for use on fixtures with a level mounting surface. Removeable steel face is fixed at 25 when mounted for optimal viewing. Item #: PSPPP028 Price: $70.00 See page 12. Pem-stud Base Mount Locking Column CELLMATE (Pem-stud Base) for Flat Surfaces Designed for use on pre-drilled MetroPCS fixtures with a level mounting surface. Item #: PSPPP034 Price: $70.00 See page 12. Locking Column CELLMATE (Pem-stud Base) for Angled Surfaces Designed for use on pre-drilled MetroPCS fixtures with a tilted or angled surface. Steel face is fixed parallel to the mounting surface. Item #: PSPPP035 Price: $70.00 See page 12. 9

Surface-Mount Base Dual Pem-Stud Base Mount CELLMATE phone holder with dual pem-stud base mount fits the hole pattern used by most MetroPCS dealers. CELLMATE (Pem-stud Base) for Flat Surfaces Designed for use on fixtures with a level mounting surface. Steel face is fixed at 25 for optimal viewing. Item #: PSPPP003 Price: $50.00 See page 12. CELLMATE (Pem-stud Base) for Angled Surfaces Designed for use on fixtures with a tilted or angled surface. Steel face is fixed parallel to the mounting surface. Item #: PSPPP032 Price: $50.00 See page 12. 10

CELLMATE Cellblocks Securing display devices to protect them from damage while still allowing users to experience all the features of the phone can be problematic. Dimensions, button locations and charger ports vary from device to device. CELLMATE solves this problem with the Cellblock. Palmer Cellblocks are inexpensive precision milled blocks of acrylic engineered to fit each phone model while still allowing access to important buttons and ports. Updating store displays as new phone models are released is as easy as purchasing a matching Cellblock and sliding it into a reusable CELLMATE base. 11

CELLMATE Cellblocks Cellblock for Phones Clear, 1/2 thick acrylic inserts compatible with the CELLMATE phone holder system are specifically engineered for the most popular phones on the market today. Blocks are precision milled to fit each device for maximum security and usability. Cellblocks for popular standard size phones are shown here. Larger devices may require a phablet holder. Please refer to the PhabletVAULT section of the catalog for more information. If your device is not listed in the catalog or on our website please let us know. There is a two weeks engineering lead time on all Cellblocks for new devices. Alcatel Item # Price One-Touch Fierce PSALC002 $12.00 One-Touch Fierce 2 PSALC004 $12.00 Evolve 2 PSALC005 $16.00 Blackberry Item # Price Blackberry Q10 PSBLA002 $16.00 Casio Item # Price G zone Commando 4G LTE PSCAS002 $12.00 HTC Item # Price Windows Phone 8X/Sharp Aquos PSHTC001 $12.00 HTC One / One Remix PSHTC008 $12.00 HTC One M8, HTC Desire 612 PSHTC010 $12.00 HTC Desire 510 PSHTC011 $12.00 HTC One M9 PSHTC012 $12.00 HTC Desire 520 PSHTC014 $12.00 Huawei Item # Price Valiant PSHUA007 $12.00 iphone Item # Price iphone 4S PSAPP001 $12.00 iphone 5/5S PSAPP002 $12.00 iphone 5C PSAPP005 $12.00 iphone 6/6S PSAPP009 $12.00 Kyocera Item # Price Hydro PSKYO001 $16.00 Hydro Extreme PSKYO004 $16.00 Hydro Icon / Hydro Life PSKYO005 $16.00 Brigadier PSKYO006 $16.00 LG Item # Price L9 PSLG014 $12.00 Optimus F6 PSLG015 $12.00 G2 PSLG016 $12.00 L70 / Realm PSLG018 $12.00 Lucid 3 PSLG019 $12.00 G3 PSLG021 $12.00 Lancet PSLG020 $16.00 Optimus F60 PSLG022 $12.00 G4 PSLG024 $12.00 Leon/Risio PSLG025 $16.00 Motorola Item # Price XT926 RAZR HD PSMOT001 $12.00 XT907 RAZR M(Micro) PSMOT003 $12.00 MOTO X PSMOT006 $16.00 Droid Mini PSMOT007 $16.00 Droid Maxx /Droid Ultra PSMOT008 $12.00 Moto G PSMOT009 $16.00 MOTO X2 PSMOT010 $12.00 Droid Turbo PSMOT011 $12.00 MOTO E PSSAM026 $12.00 Droid Turbo 2 PSMOT013 $12.00 Droid MAxx 2 PSMOT014 $16.00 12

CELLMATE Cellblocks Nokia Item # Price Lumia 521 PSNOK004 $16.00 Lumia 520 PSNOK005 $16.00 Lumia 630/635 PSNOK007 $12.00 Lumia 530 PSNOK008 $16.00 Lumia 640 PSNOK009 $12.00 Samsung Item # Price Galaxy S 3/4/Galaxy Core Prime PSSAM002 $12.00 Galaxy Discover PSSAM013 $16.00 Admire 2 PSSAM014 $16.00 Galaxy Exhibit PSSAM017 $16.00 Note 3 PSSAM018 $12.00 Galaxy S3 Mini PSSAM019 $12.00 Galaxy S4 Mini PSSAM020 $12.00 Galaxy S5 PSSAM024 $12.00 Express PSSAM026 $12.00 Avant PSSAM029 $12.00 Galaxy Light PSSAM030 $12.00 Galaxy S6/S6 Edge PSSAM034 $12.00 Galaxy S Grand Prime PSSAM035 $12.00 ZTE Item # Price Source PSZTE006 $16.00 Prelude/Prelude 2 PSZTE008 $16.00 Overture PSZTE009 $16.00 Sonata PSZTE010 $16.00 Altair PSZTE011 $16.00 Concord II PSZTE012 $16.00 Grand X PSZTE013 $12.00 Altair 2 PSZTE015 $16.00 Overture 2 PSZTE017 $12.00 Sonata 2 PSZTE018 $12.00 Obsidian PSZTE019 $12.00 a division of Palmer Promotional Products 13

PhabletVAULT Phablet Security PhabletVAULT is designed to secure large phones and phablet devices. 14

Threaded Base Mount CELLMATE phone holder with threaded base mount fits any hole from 1 1/8 2 in diameter. An oversized threaded nut is screwed on by hand from inside or under the display surface locking the pedestal securely to the fixture. Threaded Base Mount 1 1/8 D 2 D PhabletVAULT (Threaded Base) for Flat Surfaces Designed for use on fixtures with a level mounting surface. Steel face is fixed at 25 for optimal viewing. Item #: PSPPP027 Price: $65.00 See page 17. PhabletVAULT (Threaded Base) for Angled Surfaces Designed for use on fixtures with a tilted or angled surface. Steel face is fixed parallel to the mounting surface. Item #: PSPPP026 Price: $65.00 See page 17. 15

Surface-Mount Base Threaded Base Mount CELLMATE phone holder with dual pem-stud base mount fits the hole pattern used by most MetroPCS dealers. PhabletVAULT (Pem-stud Base) for Flat Surfaces Designed for use on fixtures with a level mounting surface. Steel face is fixed at 25 for optimal viewing. Item #: PSPPP031 Price: $65.00 See page 17. PhabletVAULT (Pem-stud Base) for Angled Surfaces Designed for use on fixtures with a tilted or angled surface. Steel face is fixed parallel to the mounting surface. Item #: PSPPP033 Price: $65.00 See page 17. 16

PhabletVAULT Cellblocks Cellblock for PhabletVAULT Clear, 1/2 thick acrylic inserts compatible with PhabletVAULT holders are specifically engineered for the most popular phones on the market today. Blocks are precision milled to fit each device for maximum security and usability. Check below to find your device. If your device is not listed in the catalog or on our website please let us know. There is a two weeks engineering lead time on all Cellblocks for new devices. Phablets Item # Price Alcatel OneTouch Pop 7 PSALC003 $18.00 Alcatel OneTouch Idol 3 5.5 PSSALC006 $18.00 Alcatel OneTouch Idol 3 5.5 PSSALC006 $18.00 iphone 6 Plus/ 6 PlusS PSAPP010 $18.00 Boost Max PSBOO002 $18.00 HTC Desire 626 PSHTC013 $18.00 Kyocera Hydro Wave PSKYO007 $18.00 Kyocera Hydro View PSKYO008 $18.00 LG Stylo PSLG026 $18.00 LG V10 PSLG028 $18.00 Motorola Nexus 6 PSMOT012 $18.00 Lumia 1320 PSNOK006 $18.00 Samsung Galaxy Mega PSSAM023 $18.00 Samsung Note 4 / LG GVista PSSAM028 $18.00 Samsung Note Edge PSSAM033 $18.00 Samsung Note 5 PSSAM036 $18.00 Samsung 6s Edge+ PSSAM039 $18.00 ZTE Grand X Max PSZTE014 $18.00 ZTE Olympia / ZTE ZMax PSZTE016 $18.00 a division of Palmer Promotional Products 17

TabletVAULT Tablet Security TabletVAULT is the Goliath of the CELLMATE line, designed to secure some of the most expensive and desirable devices available on the market today while still allowing complete interraction with the device. 18

Rotating & Fixed Mounts Threaded Base Mount 1 1/8 D 2 D TabletVAULT with Fixed Head (Threaded Base) for Flat Surfaces Designed for use on pre-drilled MetroPCS fixtures with a level mounting surface. Tablets are fixed in portrait orientation only. Unit does not rotate. Item #: PSPPP030 Price: $70.00 See page 22. Pem-stud Base Mount TabletVAULT with Rotating Head (Pem-stud Base) for Flat Surfaces Designed for use on fixtures with a level mounting surface. Face is angled at 25 when mounted for optimal viewing. The head of the unit can be rotated 180 degrees, allowing the customer to view the device in either portrait or landscape orientation. Item #: PSPPP005 Price: $80.00 See page 22. 19

Articulating Head TabletVAULT for Flat Surfaces (Articulating) This item is for use on flat countertops such as display tables. This unit allows you to rotate the tablet s screen in multiple directions to allow for both vertical and horizontal orientation, as well as easier customer interaction. Can only be used with Cellblock PSAPP006 for ipad Gen 2 and later. Item #: PSPPP023 Price: $110.00 See page 22. 20

TabletVAULT Mini The original TabletVAULT s little brother, the TabletVAULT Mini provides secure interaction for smaller tablets. Display your most costly and desirable devices on a pedestal offering excellent security and full user interactivity. Works with 7 and 8 tablets in a smaller footprint than the fullsized VAULT. The TabletVAULT Mini provides the same security and usability as TabletVAULT but is designed for smaller tablets and e-readers. TabletVAULT Mini (Threaded Base) for Flat Surfaces This item is for use on flat countertops such as display tables. Item #: PSPPP007 Price: $65.00 See page 22. 21

TabletVAULT & Mini Cellblocks Cellblock for TabletVAULT Clear, 3/4 thick acrylic inserts compatible with TabletVAULT and TabletVAULT Mini holders are engineered to secure the most popular tablets and mini-tablets on the market today. Blocks are precision milled to each device for extreme security. If your device is not listed in the catalog or on our website please let us know. There is a two weeks engineering lead time on all Cellblocks for new devices. Large Tablets Item # Price ipad (Gen 1) PSAPP011 $32.00 ipad (2nd Gen and later) PSAPP003 $32.00 ipad Air/iPad Air 2 PSAPP008 $32.00 LG G Pad 8 PSLG017 $32.00 LG G Pad 10.1 LTE PSLG023 $32.00 Samsung Galaxy I705 PSSAM005 $32.00 Samsung Galaxy I915 PSSAM006 $32.00 Samsung Galaxy Note 10.1 PSSAM021 $32.00 Samsung Galaxy Tab4 10.1 (95/16 x 7) PSSAM027 $32.00 Samsung Galaxy Tab S PSSAM032 $32.00 LG G Pad X8.3 PSLG027 $32.00 Samsung Galaxy Tab S2 PSSAM037 $32.00 Samsung Galaxy Tab E PSSAM038 $32.00 Mini Tablets Item # Price Galaxy Mega PSSAM022 $24.00 HTC One MAX PSHTC009 $24.00 ipad Mini PSAPP004 $24.00 Samsung Galaxy Tab4 8.0 (81/4 x47/8) PSSAM031 $24.00 Verizon Ellipsis 7 PSELL001 $24.00 Verizon Ellipsis 8 PSELL002 $24.00 ipad Mini 4 PSAPP013 $24.00 Articulating Head Item # Price Apple ipad Gen 2 PSSAPP006 $32.00 22

Accessories Acrylic FAQ Tag Add-On (MPCS) Purple and clear acrylic FAQ Tag matches MetroPCS acrylic pedestals and can be added to any CELLMATE. Item #: APMET005 Price: $10.00 CELLMATE holder and Cellblock not included. Metal Slot Nut Metal nut for use with any of the surface-mount CELLMATEs or PhabletVAULTs. This piece tightens and stabilizes the pedestal when used on fixtures with slotted openings. Item #: PSPPP036 Price: $8.85 Security Locking Kit For extra security add a locking kit. Includes: Hardend steel u-shaped bracket, padlock and keys. Item #: PSPPP019 Price: $3.50 CELLMATE holder and Cellblock not included. 23

Photo copy and fax this form to 586.772.4627 or visit us at SHIP TO: BUSINESS NAME: ADDRESS CITY: STATE: ZIP: PHONE: EMAIL: CO-OP ID: Date: / / BILL TO: BUSINESS NAME: ADDRESS CITY: STATE: ZIP: PHONE: EMAIL: CO-OP ID: Product No. Product Description Qty Unit price Extension Pre-Payment is Required We accept Visa, Mastercard, or American Express. Please fax or email your order form, along with the best phone number to reach you at, and we will contact you within 24 hours (M-F) to get your credit card details. Or you may call us with your payment information at (586) 772-4225. Sub Total Applicable Sales Tax Estimate Freight at 18% Actua Freight will be Billed Total (prepay required) Fax orders to: (586) 772.4627 or Email: sales@palmerpromos.com D008922-1/6/16 24 a division of Palmer Promotional Products