1 SCAN methods and reports Series C, M and CM Series G Series N Series P Series T Series W Test methods mainly for chemical and mechanical pulps and for wood chips Procedures of a general character Procedures for non-fibrous materials Test methods for paper and board Test methods for tall oil Test methods for waste water NSP* Reports SCAN Forsk reports published by NSP* List of withdrawn SCAN methods *Nordic Standardization Programme The documents listed are available free of charge. For more information contact Christine Allansson (christine.allansson@sis.se) or Ursula Krische (ursula.krische@sis.se) The SCAN methods are administered by SIS/TK 157 Massa och papper (Pulp and paper)
C, M, and CM series - Test methods mainly for chemical and mechanical pulps and for wood chips 2 (25) Reference CM 6:05 Title Mechanical and chemical pulps Fibre fractionation in the McNett classifier CM 11:95 Pulps Preparation of laboratory sheets (optical properties) Sheets for measuring ISO brightness C 20:65 Floating tendency and swelling of pulp sheets CM 27:00 Pulp Preparation of laboratory sheets for determination of light-scattering and light-absorption coefficients, opacity and Y-value CM 31:77 Pulps Initial wet web tensile strength, stretch and tensile energy absorption 25 per cent dry matter content (= C 31:77/M 11:77) C 32:78 Fluff Heat treatment for ageing tests C 33:80 Fluff Specific volume and absorption properties CM 37:85 Fluff Knot content CM 38:05 Pulps, papers and boards Calcium, magnesium, iron, manganese and copper content Atomic absorption spectroscopy (= P 74:05) CM 39:94 Wood chips for pulp production Dry matter content CM 40:01 Wood chips for pulp production Size distribution CM 41:94 Wood chips for pulp production Sampling CM 42:06 Wood chips for pulp production Bark content CM 43:95 Wood chips for pulp production Basic density CM 44:97 Pulps (dried market pulps) AOX, COD and TOC removable by washing C 45:00 Pulp (wet, never-dried chemical pulp) COD and TOC removable by washing CM 46:92 CM 47:92 CM 48:01 CM 49:03 CM 53:94 CM 54:97 CM 55:99 CM 57:99 CM 59:01 C 60:02 C 61:02 C 62:00 CM 63:05 CM 65:02 CM 66:05 CM 67:03 CM 68:05 Wood chips for pulp production Bulk density Wood chips for pulp production Thickness and thickness distribution Wood chips for pulp production Length and length distribution, width and width distribution Wood chips for pulp production and pulp Content of acetone-soluble matter Wood chips for pulp production Wood content in the bark fraction Pulps, papers and boards Cadmium and lead content Atomic absorption spectrometry - graphite furnace technique (= P 73:97) Pulp Extractable organic chlorine Pulp Total sulphur content Wood chips for pulp production Preparation of tablets for the measurement of ISO brightness Pulp, paper and paperboard Microbiological examination Total colony number Using the dry rehydratable film method (=P 81:02) Pulp, paper and paperboard Microbiological examination Surface colony number Using the dry rehydratable film method (=P 82:02) Chemical pulp Water Retention Value Pulp, paper and board Sodium and potassium contents Atomic Absorption Spectroscopy (AAS) using a flame (=P 83:05) Pulp Total acidic group content Conductometric titration method Mechanical and chemical pulps Fines content Wood chips for pulp production and pulp Content of extractable lipophilic Mechanical and chemical pulps Standard water for physical testing Valid SCAN methods Ch 131031.xlsx
C, M, and CM series - Test methods mainly for chemical and mechanical pulps and for wood chips 3 (25) Reference CM 69:09 CM 70:09 CM 71:09 Title Pulps - Initial wet tensile properties at different dry matter content In-plane shrinkage of laboratory sheets Pulps - Carbohydrate composition Valid SCAN methods Ch 131031.xlsx
G series - Procedures of a general character 4 (25) Reference G 2:07 G 5:03 Title Statistical treatment of test results Pulp, paper and board Basic equations for optical properties G 6:00 Pulp, paper and board Uncertainty of results from physical testing Valid SCAN methods Ch 131031.xlsx
N series - Procedures for non-fibrous materials 5 (25) Reference Title N 2:88 White and green liquors Total, active and effective alkali Titration with indicators N 3:63 Sulphide, sulphite and thiosulphate in white and green liquors N 4:78 White and green liquors Chloride content N 5:83 White and green cooking liquors Total sulphur N 6:85 White and green liquors Sulphate content N 22:96 Black liquor Dry matter content and fibre content N 23:78 Lime sludge Dry matter content N 25:81 Burnt lime sludge Available lime N 26:81 Lime and lime sludge Acid-soluble sodium N 27:81 Lime sludge Water-soluble sodium N 30:85 White and green liquors Total, active and effective alkali Potentiometric titration N 31:94 White, green and black liquor Hydrogen sulphide ion concentration N 32:98 N 33:94 N 34:96 N 35:96 N 36:98 N 37:98 N 38:01 N 39:05 White, green and black liquors and burnt lime sludge Carbonate content Black liquor Residual alkali (Hydroxide ion content) Oxidized white liquors Hydrogen sulphide ion concentration Black liquors Total sulphur content Black liquors and sulphite spent liquor Sulphite, sulphate and thiosulphate ion concentrations Black liquor Sodium and potassium contents Black liquor Acid-soluble calcium, magnesium, iron, manganese, aluminium and silica Process liquors from bleached plants Dissolved and precipitated oxalate Using Ion Chromatography Valid SCAN methods Ch 131031.xlsx
P series - Test methods for paper and board 6 (25) Reference P 9:93 P 20:95 P 26:78 P 29:95 P 36:02 P 37:77 P 39:80 P 40:80 P 41:81 P 42:81 P 45:86 P 48:83 P 50:84 P 52:84 P 53:84 P 54:84 P 55:85 P 56:86 P 57:86 P 59:87 P 61:88 P 65:91 P 70:09 P 73:97 P 74:05 P 77:95 P 78:02 P 79:02 P 80:98 P 81:02 P 82:02 Title Paper and board Identification of machine and cross direction Papers and boards Wet tensile strength and wet tensile strength retention Constant rate of elongation method Paper and board Air permeance Method for dense papers Papers and boards Bending resistance Paper and board Evaluation of test prints Paper and board Oil absorbency Cobb-Unger method Fillers and pigments Dry matter content Fillers and pigments Ignition residue Fillers and pigments Coarse particles Wet sieving method Paper and board CCT value and CCT index Corrugated crush test Fillers, pigments and starch Sampling Fillers and pigments ph value of an aqueous suspension Pigments Brookfield viscosity of slurries Starch Dry matter content Low density papers Air permeance Gurley method Starch Chloride content Fillers and pigments Dispersion agent requirement Modified starch products Organic nitrogen by the Kjeldahl method Low-density papers Heat treatment for curing tests Fillers and pigments Microbiology Enumeration of bacteria Latex Dry matter content Corrugated fibreboards and boards Bending stiffness Four-point method Papers and boards Ink-absorbency value Pulps, papers and boards Cadmium and lead content Atomic absorption spectrometry graphite furnace technique (=CM 54:97) Pulps, papers and boards Calcium, magnesium, iron, manganese and copper content Atomic absorption spectroscopy (= CM 38:05) Papers and boards Fracture toughness Constant rate of elongation method (1,7 mm/s) Paper and board Test printing using a Prüfbau-type printability tester Newsprint Test printing using a Prüfbau-type printability tester Papers and boards Z-directional tensile strength Pulp, paper and paperboard Microbiological examination Total colony number Using the dry rehydratable film method (=C 60:02) Pulp, paper and paperboard Microbiological examination Surface colony number Using the dry rehydratable film method (=C 61:02) Valid SCAN methods Ch 131031.xlsx
P series - Test methods for paper and board 7 (25) Reference Title P 83:05 Pulp, paper and board Sodium and potassium contents Atomic Absorption Spectroscopy (AAS) using a flame (= CM 63:05) P 84:02 Paper and board Surface roughness and surface compressibility Bendtsen method with pressure correction P 85:02 Paper and board Air permeance Bendtsen method with pressure correction P 86:02 Paper and board Test printing using an IGT-type printability tester P 87:02 Newsprint Test printing using an IGT-type printability tester P 88:01 Paper and board Structural thickness and structural density Filler and pigment (powder and slurries) Preparation of tablets for the P 89:03 measurement of ISO brightness, Y-value and color (C/2º) P 90:03 Paper and board Z-directional toughness P 91:09 Paper, board and process waters Starch content (=W 13:09) Paper and board - Beta-radiation-based grammage formation P 92:09 measurement Point source method Valid SCAN methods Ch 131031.xlsx
T series - Test methods for tall oil 8 (25) Reference T 4:66 T 6:67 T 8:68 T 11:72 T 12:72 T 13:74 T 14:78 T 15:78 Title Ash in tall oil Flash and fire points of tall oil Sampling of crude tall oil Acid number of tall oil Saponification number of tall oil Unsaponifiable matter in tall oil Tall oils Resin acids Crude tall oils Determination of water-soluble acids Valid SCAN methods Ch 131031.xlsx
W series - Test methods for waste water 9 (25) Reference Title W 7:72 Settleable matter in waste water W 10:93 Effluents from pulp mills Determination of chlorates W 11:03 Effluents from pulp and paper mills Determination of EDTA and DTPA W 12:04 Process waters Cationic demand Polyelectrolytic titration with a streaming current detector W 13:09 Paper, board and process waters Starch content (=P 91:09) Valid SCAN methods Ch 131031.xlsx
NSP* Reports Reference NSP Report No. 1 NSP Report No. 2 NSP Report No 3 NSP Report No 4 NSP Report No 5 Title Accelerated ageing of chemical pulps Compared to natural ageing in a warehouse (NSP-WG Physical testing Pulp) Minimizing interlaboratory deviations in the molecular mass determination of chemical pulps by lithium chloride/n,ndimethylacetamide size-exclusion chromatography (E. Sjöholm, R. Wadsborn, J Brucher, B. Hortling) Two methods for extraction and GC- analysis of lipophilic wood extractives (NSP-WG Extractives, Convenor: Marianne Björklund Jansson) Determination of extract content in pulp and chip samples - Influence of various parameters Beta-radiation based grammage formation measurement - Radiogram methods applicable to paper and light weight board * Nordic Standardization Programme
SCAN Forsk reports published by NSP* Reference Title 747 March 2003 Carbonydrate analysis Results and recommendations from the NI Network group Carbohydrate analysis (Anna Jacobs, Christiane Laine, Kristin Syverud) * Nordic Standardization Programme
List of withdrawn SCAN-test Methods 2013-11-06 12 (25) Pulps Laboratory beating Part 3: Jokro mill method Pulps Preparation of laboratory sheets for physical testing Part 2: Rapid-Köthen method Pulp, paper and board Determination of 7 specified polychlorinated biphenyls (PCB) Paper and board Sampling to determine average quality (ISO/DIS: 2000, pren ISO:2000) Paper and board Determination of CIE whiteness, C/2 (indoor illumination conditions) ISO 5264-3:1979, Pulps - laboratory beating - Part3: Jokro mill method Upphävd 2003-01-08 ISO 5269-2:2004, Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-Köthen method ISO 15318:1999, Pulp, paper and board - Determination of 7 specified polychlorinated biphenyls (PCB) ISO 186:2002, Paper and board - Sampling to determine average quality ISO 11476:2010, Paper and board - Determination of CIE whiteness, C/2 degrees (indoor illumination conditions) SS-EN 25264-3, Massa - Laboratoriemalning - Del 3: Jokro-kvarn (ISO 5264-3:1979) Upphävd 2013-06-03 5269-2:2004, Massa - Laboratorieark för fysikalisk provning - Del 2: Rapid-Köthen-metod (ISO 5269-2:2004) 15318:1999, Massa, papper och papp - Bestämning av 7 specificerade polyklorerade bifenyler (PCB) (ISO 15318:1999) 186:2002, Papper och papp - Provtagning för bestämning av genomsnittlig kvalitet (ISO 186:2002) 11476:2010, Papper och kartong - Bestämning av CIE-vithet, C/2 grader (inomhusljusförhållande) (ISO 11476:2010, IDT) C 01:00 Chemical pulp Kappa number ISO 302:2004, Pulps - Determination of Kappa number C 02:61 Alkali solubility of pulp ISO 692:1982, Pulps - Determination of alkali solubility C 03:78 Pulps Determination of dry matter content ISO 638:2008, Paper, board and pulps - Determination of dry matter content - Ovendrying method 302:2012, Massa - Bestämning av kappatal (ISO 302:2004, IDT) 638:2008, Papper, kartong och massa - Bestämning av torrsubstans - Metod för torkning i värmeskåp (ISO 638:2008) C 04:61 Pentosans in pulp Obsolete C 05:62 Sulphated ash in pulp Obsolete
List of withdrawn SCAN-test Methods 2013-11-06 13 (25) C 06:62 Ash in pulp 575 ºC ISO 1762:2001, Paper, board and pulps - Determination of residue (ash) on ignition at 525 degrees C C 07:62 Dichloromethane extract of pulp CM 45:93 C 08:62 Ethanol extract of pulp Obsolete C 09:62 Silicates and silica in pulp Obsolete C 10:62 Calcium in pulp ISO 777:2005, Paper, board and pulp - Determination of acid-soluble calcium Upphävd 2011-11-15, ersatt av ISO 12830:2011 12830:2011, Papper, kartong och massa - Bestämning av syralöslig magnesium, kalcium, mangan, järn, koppar, natrium och kalium (ISO 12830:2011, IDT) C 15:99 C 16:62 Pulp Viscosity in cupriethylene-diamine solution Preparation of cupriethylenediamine (CED) solution ISO 5351:2010, Pulps - Determination of limiting viscosity number in cupriethylenediamine (CED) solution ISO 5351:2010, Pulps - Determination of limiting viscosity number in cupriethylenediamine (CED) solution (Annex A) C 17:64 Pulps Determination of stock concentration ISO 4119:1995, Pulps - Determination of stock concentration C 18:65 Pulps Laboratory wet disintegration ISO 5263-1:2004, Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps Ersätter ISO 5263:1995 (Uppdelad i 3 delar) 5351:2010, Massa - Bestämning av gränsviskositetstal i kopparetylendiaminlösning (ISO 5351:2010, IDT) 5351:2010, Massa - Bestämning av gränsviskositetstal i kopparetylendiaminlösning (ISO 5351:2010, IDT) 4119:1996, Massa - Bestämning av torrhalt i mäld (ISO 4119:1995) 5263-1:2004 Massa - Våtuppslagning på laboratoriet - Del 1: Våtuppslagning av kemisk massa (ISO 5263-1:2004) Ersätter 5263:1996, upphävd 2004-10-01 (Uppdelad i 3 delar)
List of withdrawn SCAN-test Methods 2013-11-06 14 (25) C 19:65 Pulps Determination of drainability Part 1: ISO 5267-1:1999, Pulps - Determination of Schopper-Riegler method (ISO/FDIS, 1998-12) drainability - Part 1: Schopper-Riegler method C 21:65 C 24:96 Drainability of pulp by the Canadian Freeness method Pulps Laboratory beating Part 2: PFI mill method (ISO/DIS 2001-06,prEN ISO 5264-2:2001) ISO 5267-2:2001, Pulps - Determination of drainability - Part 2: "Canadian Standard" freeness method ISO 5264-2:2011, Pulps - Laboratory beating - Part 2: PFI mill method C 25:96 Pulps Laboratory beating Valley beater ISO 5264-1:1979, Pulps - Laboratory beating - Part 1: Valley beater method C 28:76, C 28RE Pulps Laboratory sheets Determination of physical properties ISO 5270:2012, Pulps - Laboratory sheets - Determination of physical properties C 29:72 Chlorine consumption of pulp ISO 3260:1982, Pulps - Determination of chlorine consumption (Degree of delignification) C 30:73 Sodium content of wet pulp Obsolete C 34:80 Chemical pulps Alkali resistance ISO 699:1982, Pulps - Determination of alkali resistance C 36:84 Pulps Stiffness and compression strength properties CM 12:87 Pulps and papers Copper content Photometric procedure ISO 5270:2012, Pulps - Laboratory sheets - Determination of physical properties ISO 778:2005, Paper, board and pulp - Determination of acid-soluble copper Upphävd 2011-11-15, ersatt av ISO 12830:2011 5267-1:2000, Massa - Bestämning av avvattningsförmåga - Del 1: Schopper- Riegler-metod (ISO 5267-1:1999) 5264-2:2011, Massa - Laboratoriemalning - Del 2: PFI-kvarn (ISO 5264-2:2011) 5264-1:2012, Massa - Laboratoriemalning - Del 1: Valley-holländare (ISO 5264-1:1979, IDT) 5270:2012, Massa - Laboratorieark - Bestämning av fysikaliska egenskaper (ISO 5270:2012) 3260:2012, Massa - Bestämning av klorförbrukning (Delignifieringsgrad) (ISO 3260:1982, IDT) 699:2012, Massa - Bestämning av alkaliresistens (ISO 699:1982, IDT) 5270:2012, Massa - Laboratorieark - Bestämning av fysikaliska egenskaper (ISO 5270:2012) 12830:2011, Papper, kartong och massa - Bestämning av syralöslig magnesium, kalcium, mangan, järn, koppar, natrium och kalium (ISO 12830:2011, IDT)
List of withdrawn SCAN-test Methods 2013-11-06 15 (25) CM 13:87 Pulps and papers Iron content Photometric procedure CM 14:05 Pulp and paper Manganese content Photometric procedure CM 26:99 Pulps Preparation of laboratory sheets for physical testing Part 1: Conventional sheetformer method ISO 779:2005, Paper, board and pulp - Determination of acid-soluble iron Upphävd 2011-11-15, ersatt av ISO 12830:2011 ISO 1830:2005, Paper, board and pulps - Determination of acid-soluble manganese Upphävd 2011-11-15, ersatt av ISO 12830:2011 ISO 5269-1:2005, Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method 12830:2011, Papper, kartong och massa - Bestämning av syralöslig magnesium, kalcium, mangan, järn, koppar, natrium och kalium (ISO 12830:2011, IDT) 12830:2011, Papper, kartong och massa - Bestämning av syralöslig magnesium, kalcium, mangan, järn, koppar, natrium och kalium (ISO 12830:2011, IDT) SS-EN IS 5269-1:2005, Massa - Laboratorieark för fysikalisk provning - Del 1: Konventionell arkformningsmetod (ISO 5269-1:2005) CM 51:94 Pulps, papers and boards Total chlorine ISO 11480:1997, Pulp, paper and board - Determination of total chlorine and organically bound chlorine CM 52:94 Pulps, papers and boards Organic chlorine ISO 11480:1997, Pulp, paper and board - Determination of total chlorine and organically bound chlorine CM 56:96 Pulps, papers and boards Cold-water-soluble chloride content CM 58:95 Pulps Standard water for physical testing Part 1: Water for testing of drainability properties CM 64:00 Pulp Preparation of laboratory sheets for physical testing Closed water system ISO 9197:2006, Paper, board and pulps - Determination of water-soluble chlorides ISO 14487:1997, Pulps - Standard water for physical testing ISO 5269-3:2008, Pulps - Preparation of laboratory sheets for physical testing - Part 3: Conventional and Rapid-Köthen sheet formers using a closed water system 9197:2010, Papper, kartong och massa - Bestämning av vattenlösliga klorider (ISO 9197:2006, IDT) 14487:2012, Massa - Standardvatten för fysikalisk provning (ISO 14487:1997, IDT) 5269-3:2009, Massa - Laboratorieark för fysikalisk provning - Del 3: Konventionell och Rapid-Köthen arkmallar för slutet vattensystem (ISO 5269-3:2008, IDT)
List of withdrawn SCAN-test Methods 2013-11-06 16 (25) G 01:92 Paper, board and pulps Measurement of diffuse reflectance factor + techn. corrigendum 1998-06 ISO 2469:2007, Paper, board and pulps - Measurement of diffuse radiance factor G 03:90 Pulps, papers and boards Fibre furnish analysis General procedure ISO 9184, Paper, board and pulps - Fibre furnish analysis - Part 1 to Part 7 G 04:90 Pulps, papers and boards Fibre furnish analysis Staining procedures ISO 9184, Paper, board and pulps - Fibre furnish analysis - Part 1 to Part 7 M 01:64 Pulps Determination of stock concentration ISO 4119:1995, Pulps - Determination of stock concentration 4119:1996, Massa - Bestämning av torrhalt i mäld (ISO 4119:1995) M 02:64 (at 20 C), M 04:65 M 13:83 M 10:77 (at 85 C) Pulps Laboratory wet disintegration Drainability of pulp by the Canadian Freeness method Mechanical pulp Shives content PFI Minishive fractionator Pulps Laboratory wet disintegration N 01:61 Dry matter in sulphite spent liquor Obsolete N 07:64 Sampling of yeast from sulphite spent liquor Obsolete N 08:64 Dry matter in yeast from sulphite spent liquor Obsolete ISO 5263-1:2004, Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps ISO 5267-2:2001, Pulps - Determination of drainability - Part 2: "Canadian Standard" freeness method No ISO 5263-1:2004, Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps 5263-1:2004, Massa - Våtuppslagning på laboratoriet - Del 1: Våtuppslagning av kemisk massa (ISO 5263-1:2004) 5263-1:2004, Massa - Våtuppslagning på laboratoriet - Del 1: Våtuppslagning av kemisk massa (ISO 5263-1:2004) N 09:64 Ash in yeast from sulphite spent liquor Obsolete N 15:65 Living and dead cells in a yeast suspension Obsolete N 16:66 Solid matter in sulphite spent liquor Obsolete
List of withdrawn SCAN-test Methods 2013-11-06 17 (25) N 17:66 Nitrogen in sulphite spent liquor Obsolete N 18:66 Phosphorus in sulphite spent liquor Obsolete N 19:66 Sulphate in sulphite spent liquor Obsolete N 20:66 Residual and releasable sulphur dioxide in Obsolete sulphite spent liquor N 21:74 Mercury in sodium hydroxide solutions Obsolete N 24:80 Lime and lime sludge Acid soluble calcium Obsolete and magnesium N 28:82 Lime sludge Water-soluble calcium Obsolete N 29:84 White and green cooking liquors Sodium and Obsolete potassium P 01:61 Sampling of paper and paperboard from lots ISO 186:2002, Paper and board - Sampling to determine average quality P 02:75 P 03:93 Paper, board and pulps Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples Paper, board and pulps Measurement of diffuse blue reflectance factor (ISO brightness) ISO 187:1990, Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples ISO 2470-1:2009, Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness) Ersätter ISO 2470:1999 (Uppdelad i 2 delar) 186:2002, Papper och papp - Provtagning för bestämning av genomsnittlig kvalitet (ISO 186:2002) SS-EN 20187:1994, Papper, papp och massa - Standardklimat för konditionering och provning samt metod för övervakning av klimatet och konditionering av prover (ISO 187:1990) 2740-1:2009, Papper, kartong och massa - Mätning av diffus blå reflektansfaktor - Del 1: Inomhus dagsljusförhållande (ISOljushet) (ISO 2470-1:2009, IDT) P 04:63 P 06:75 Paper and board Determination of moisture content Oven-drying method ISO 287:2009, Paper and board - Determination of moisture content of a lot - Oven-drying method Paper and board Determination of grammage ISO 536:2012, Paper and board - Determination of grammage 287:2009, Papper och kartong - Bestämning av fukthalt i varuparti - Metod för torkning i värmeskåp (ISO 287:2009) 536:2012, Papper och kartong - Bestämning av ytvikt (ISO 536:2012)
List of withdrawn SCAN-test Methods 2013-11-06 18 (25) P 07:96 P 08:93 P 08:93 Paper and board Determination of thickness and apparent bulk density or apparent sheet density Paper and board Determination of opacity (paper backing) Diffuse reflectance method Paper Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) P 10:93 Paper and board Identification of wire side No ISO 534:2005, Paper and board - Determination of thickness, density and specific volume ISO 2471:2008, Paper and board - Determination of opacity (paper backing) - Diffuse reflectance method ISO 9416:2009, Paper - Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) 534:2005, Papper och papp - Bestämning av tjocklek, densitet och specifik volym (ISO 534:2005) 2471:2009, Papper och kartong - Bestämning av opacitet (pappersunderlag) - Metod: Diffus reflektans (ISO 2471:2008, IDT) 9416:2009, Papper - Bestämning av ljusspridnings- och ljusabsorptionskoefficienter (genom att använda Kubelka-Munk-teorin) (ISO 9416:2009, IDT) P 11:96 P 12:64 P 13:64 Paper Determination of tearing resistance (Elmendorf method) Paper and board Determination of water absorptiveness Cobb method Capillary rise of water in paper and paperboard by the Klemm method ISO 1974:2012, Paper - Determination of tearing resistance - Elmendorf method ISO 535:1991, Paper and board - Determination of water absorptiveness - Cobb method EN 20535:1995 Under revidering ISO 8787:1986, Paper and board - Determination of capilarry rise - Klemm method 1974:2012, Papper - Bestämning av rivstyrka - Elmendorfs metod (ISO 1974:2012) SS-EN 20535, Papper och papp - Bestämning av vattenupptagningsförmåga - Cobbs metod (ISO 535:1991) Reviderad standard publiceras som 535
List of withdrawn SCAN-test Methods 2013-11-06 19 (25) P 14:65 ph of aqueous extracts of paper ISO 6588-1:2012, Paper, board and pulps - Determination of ph of aqueous extracts - Part 1: Cold extraction ISO 6588-2:2012, Paper, board and pulps - Determination of ph of aqueous extracts - Part 2: Hot extraction 6588-1:2012, Papper, kartong och massa - Bestämning av ph i vattenextrakt - Del 1: Kall extraktion (ISO 6588-1:2012, IDT) 6588-2:2012, Papper, kartong och massa - Bestämning av ph i vattenextrakt - Del 2: Varm extraktion (ISO 6588-2:2012, IDT) P 15:90 P 16:76 P 17:77 P 18:66 P 19:78 P 21:67 Pulps, papers and boards Conductivity of aqueous extracts Paper and board Tensile strength and stretch Pendulum apparatus ISO 6587:1992, Paper, board and pulps - Determination of conductivity of aqueous extracts Obsolete - Class of instruments covered superseded by that covered by ISO 1924-2 (see P 38:80) Paper Folding endurance Köhler-Molin ISO 5626:1993, Paper - Determination of tester folding endurance Contact angle of water on paper and TAPPI T 558 pm -95 or ASTM D 5725-95 paperboard Paper and board Air permeance Gurley ISO 5636-5:2013, Paper and board - method (withdrawn Jan. 2003, reintroduced by Determination of air permeance (medium range) TK Physical testing March 2003) - Part 5: Gurley method Roughness of paper and paperboard determined with the Bendtsen tester ISO 8791-2:2013, Paper and board - Determination of roughness/smoothness (air leak methods) - Part 2: Bendtsen method 1924-2:2008, Papper och papp - Bestämning av dragegenskaper - Del 2: Metod baserad på konstant förlängningshastighet (20 mm/min) (ISO 1924-2:2008), se nedan P38:80 5626:2011, Papper - Bestämning av vikstyrka (ISO 5626:1993, IDT) 5636-5:2013, Papper och kartong - Bestämning av luftpermeans (mellannivå) - Del 5: Metod enligt Gurley (ISO 5636-5:2013, IDT) 8791-2:2013, Papper och kartong - Bestämning av ytråhet/ytjämnhet (luftläckagemetoder) - Del 2: Metod enligt Bendtsen (ISO 8791-2:2013, IDT)
List of withdrawn SCAN-test Methods 2013-11-06 20 (25) P 22:68 Water vapour transmission through paper and paperboard ISO 2528:1995, Sheet materials - Determination of water vapour transmission rate - Gravimetric (dish) method ISO 9932:1990, Paper and board - Determination of water vapour transmission rate of sheet materials - Dynamic sweep and static gas methods P 23:68 Puncture resistance of paperboard ISO 3036:1975, Board - Determination of puncture resistance P 24:99 Papers Bursting strength and bursting energy absorption ISO 2758:2001, Paper - Determination of bursting strength 2528:2011, Arkmaterial - Bestämning av vattenångpermeabilitet - Gravimetrisk (skål) metod (ISO 2528:1995, IDT) 9932:2012, Papper och kartong - Bestäming av vattenångpermeabilitet för arkmaterial - Dynamisk och statisk metod (ISO 9932:1990, IDT) 3036:2011, Kartong - Bestämning av genomslagshållfasthet (ISO 3036:1975, IDT) 2758:2003, Papper - Bestämning av sprängstyrka (ISO 2758:2001) P 25:81 Boards Bursting strength ISO 2759:2001, Board - Determination of bursting strength P 27:69 Corrugating medium Determination of the ISO 7263:2011, Corrugating medium - flat crush resistance after laboratory fluting Determination of the flat crush resistance after laboratory fluting P 28:88 Paper and boards Hygroexpansivity ISO 8226-1:1994, Paper and board - Measurement of hygroexpansivity - Part 1: Hygroexpansivity up to a maximum relative humidity of 68 % ISO 8226-2:1990, Paper and board - Measurement of hygroexpansivity - Part 2: Hygroexpansivity up to a maximum relative humidity of 86 % 2759:2003, Papp - Bestämning av sprängstyrka (ISO 2759:2001) 7263:2011, Vågskiktspapper - Bestämning av plankrosstyrka för laboratoriekorrugerat papper (ISO 7263:2011) 8226-1:2011, Papper och kartong - Mätning av hygroexpansion - Del 1: Hygroexpansion upp till en relativ fuktighet på maximalt 68 % (ISO 8226-1:1994, IDT) 8226-2:2011, Papper och kartong - Mätning av hygroexpansion - Del 2: Hygroexpansion upp till en relativ fuktighet på maximalt 86 % (ISO 8226-2:1990, IDT)
List of withdrawn SCAN-test Methods 2013-11-06 21 (25) P 31:71 Thickness of corrugated fibreboard ISO 3034:2011, Corrugated fibreboard - Determination of single sheet thickness P 32:71 P 33:71 Single-faced and single wall corrugated fibreboard Determination of flat crush resistance Corrugated fibreboard Determination of edgewise crush resistance (Unwaxed edge method) ISO 3035:2011, Corrugated fibreboard - Determination of flat crush resistance ISO 3037:2013, Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) P 34:71 Ring crush resistance of paper and paperboard ISO 12192:2011, Paper and board - Determination of compressive strength - Ring crush method P 35:72 Test printing of newsprint in the GFL rotary Obsolete test printing press P 38:80 P 44:81 Paper and board - Determination of tensile properties. Part 2: Constant rate of elongation method Part 4: Determination of tensile strength, stretch at break and tensile energy absorption P 46:83 Paper and board Compression strength Short span test P 47:83 Part 3: Determination of thickness, bulking thickness and apparent bulk density ISO 1924-2:2008, Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min) ISO 12625-4:2005, Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at break and tensile energy absorption ISO 9895:2008, Paper and board - Compressive strength - Short-span test ISO 12625-3:2005, Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density 3034:2011, Wellpapp - Bestämning av tjocklek hos enskilt ark (ISO 3034:2011, IDT) 3035:2011, Wellpapp - Bestämning av plankrosstryck (ISO 3035:2011) 3037:2013, Wellpapp - Bestämning av kantkrosstyrka - Metod för ovaxade kanter (ISO 3037:2013) 12192:2011, Papper och kartong - Bestämning av kompressionsstyrka - Ringkrossmetod (ISO 12192:2011, IDT) 1924-2:2008, Papper och papp - Bestämning av dragegenskaper - Del 2: Metod baserad på konstant förlängningshastighet (20 mm/min) (ISO 1924-2:2008) 12625-4:2005, Mjukpapper och mjukpappersprodukter - Del 4: Bestämning av dragstyrka, brottöjning och brottarbete (ISO 12625-4:2005) 9895:2009, Papper och kartong - Kompressionsstyrka - Prov med kort inspänningslängd (ISO 9895:2008, IDT) 12625-3:2005, Mjukpapper och mjukpappersprodukter - Del 3: Bestämning av tjocklek, bulktjocklek och bulkdensitet (ISO 12625-3:2005)
List of withdrawn SCAN-test Methods 2013-11-06 22 (25) P 5:63 Ash (925 C) in paper and paperboard ISO 2144:1997, Paper, board and pulps - Determination of residue (ash) on ignition at 900 degrees C P 58:86 Part 5: Determination of wet tensile strength ISO 12625-5:2005, Tissue paper and tissue products - Part 5: Determination of wet tensile strength P 60:87 P 62:88 Paper and board Air permeance Bendtsen method Low density papers Water absorption rate and water absorbency P 63:90 Papers and boards Picking resistance Determination with the IGT-Tester, Electrical model P 64:90 Papers and boards Bending stiffness Resonance method P 66:93 Paper and board Determination of CIE whiteness, D65/10 (outdoor daylight) ISO 5636-3:2013, Paper and board - Determination of air permeance (medium range) - Part 3: Bendtsen method ISO 12625-8:2010, Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket- immersion test method ISO 3783:2006, Paper and board - Determination of resistance to picking - Accelerated speed method using the IGT-type tester (electric model) ISO 5629:1983, Paper and board - Determination of bending stiffness - Resonance method ISO 11475:2004, Paper and board - Determination of CIE whiteness, D65/10 degrees (outdoor daylight) Under revidering 12625-5:2005, Mjukpapper och mjukpappersprodukter - Del 5: Bestämning av våtstyrka (våtdragstyrka) (ISO 12625-5:2005) 5636-3:2013, Papper och kartong - Bestämning av luftpermeans (mellannivå) - Del 3: Metod enligt Bendtsen 12625-8:2011, Mjukpapper och mjukpappersprodukter - Del 8: Vattenabsorptionstid och vattenabsorptionskapacitet, provningsmetod med nedsänkning i vatten (ISO 12625-8:2006) 3783:2011, Papper och kartong - Bestämning av nappningsmotstånd - Metod med accelererande hastighet med IGT-apparat (elektrisk modell) (ISO 3783:2006, IDT) 5629:2011, Papper och kartong - Bestämning av böjstyvhet - Resonansmetoden (ISO 5629:1983, IDT) 11475:2012, Papper och kartong - Bestämning av CIE vithet, D65/10 grader (utomhus dagsljus) (ISO 11475:2004, IDT)
List of withdrawn SCAN-test Methods 2013-11-06 23 (25) P 67:93 Pulps, papers and boards Tensile strength, strain at break, tensile energy absorption and tensile stiffness Constant rate of elongation method (1,7 mm/s) ISO 1924-3:2011, Paper and board - Determination of tensile properties - Part 3: Constant rate of elongation method (100 mm/min) P 68:94 Pulps, papers and boards Total chlorine ISO 11480:1997, Pulp, paper and board - Determination of total chlorine and organically bound chlorine P 69:94 Pulps, papers and boards Organic chlorine ISO 11480:1997, Pulp, paper and board - Determination of total chlorine and organically bound chlorine P 71:95 Paper and board Determination of colour (C/2 ) Diffuse reflectance method (2000-01) ISO 5631-1:2009, Paper and board - Determination of colour by diffuse reflectance - Part 1: Indoor daylight conditions (C/2 degrees) P 72:95 Papers and boards Colour (D65/10 ) ISO 5631-2:2008, Paper and board - Determination of colour by diffuse reflectance - Part 2: Outdoor daylight conditions (D65/10 degrees) P 75:96 P 76:95 Pulps, papers and boards Cold-water-soluble chloride content Papers and boards Surface roughness Print- Surf method T 01:65 Refractive index of tall oil and turpentine oil Obsolete ISO 9197:2006, Paper, board and pulps - Determination of water-soluble chlorides ISO 8791-4:2007, Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method 1924-3:2011, Papper och papp - Bestämning av dragegenskaper - Del 3: Metod baserad på konstant förlängningshastighet (100 mm/min) (ISO 1924-3:2005, IDT) 5631-1:2009, Papper och kartong - Bestämning av färg med diffus reflektans - Del 1: Inomhusförhållanden (C/2 grader) (ISO 5631-1:2009, IDT) 5631-2:2009, Papper och kartong - Bestämning av färg med diffus reflektans - Del 2: Dagsljusförhållanden (D65/10 grader) (ISO 5631-2:2008, IDT) 9197:2010, Papper, kartong och massa - Bestämning av vattenlösliga klorider (ISO 9197:2006, IDT) 8791-4:2013, Papper och kartong - Bestämning av ytråhet/ytjämnhet (luftläckagemetoder) - Del 4: Print Surfmetoden (ISO 8791-4:2007, IDT) T 02:65 Density of tall oil and turpentine oil Obsolete
List of withdrawn SCAN-test Methods 2013-11-06 24 (25) T 03:66 Traces of water in distilled tall oil and Obsolete turpentine oil T 05:67 Pour point of tall oil Obsolete T 07:67 Water in crude tall oil Obsolete T 09:68 Viscosity of tall oil Obsolete T 10:69 Softening point of tall oil rosin and pitch Obsolete determined with a ring and ball apparatus T 16:82 Crude tall oils Distillation yield Obsolete W 01:66 Permanganate number of waste waters ISO 8467:1993, Water quality - Determination of permanganate index W 02:67 Magnesium in waste water ISO 7980:1986, Water quality - Determinaiton of calcium and megnesium - Atomic absorption spectrometric method 8467:1995, Vattenundersökningar - Bestämning av permanganatindex (ISO 8467:1993) 7980:2000, Vattenundersökningar - Bestämning av kalcium och magnesium - Atomabsorptionsspektrometrisk metod (ISO 7980:1986) W 03:68 Non-volatile matter in waste waters SS 28113:1981, Vattenundersökningar - Bestämning av torrsubstans och glödgningsrest i vatten, slam och sediment W 04:69 Hydrogen sulphide in waste water ISO 13358:1997, Water quality - Determination of easily released sulfide W 05:71 Biochemical oxygen demand of industrial effluents EN 1899-1:1998, Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition (ISO 5815:1989, modified) SIS 28117:1976, Vattenundersökningar - Bestämning av sulfidkoncentrationen hos avloppsvatten. Kolorimetrisk metod SS-EN 1899-1:1998, Vattenundersökningar - Bestämning av biokemisk syreförbrukning efter n dagar (BOD") - Del 1: Utspädningsmetod med tillsats av allyltiourinämne (ISO 5815:1989, modified)
List of withdrawn SCAN-test Methods 2013-11-06 25 (25) W 06:71 Suspended matter in waste water EN 872:2005, Water quality - Determination of suspended solids - Method by filtration through glass fibre filters SS-EN 872:2005, Vattenundersökningar - Bestämning av suspenderade ämnen - Metod baserad på filtrering genom glasfiberfilter W 08:73 Phosphorus in waste water ISO 10695:2000, Water quality - Determination of selected organic nitrogen and phosphorus compounds - Gas chromatographic methods W 09:89 W 10:93 Effluents from pulp mills - Organically bound chlorine by the AOX method Effluents from pulp mills - Determination of chlorates ISO 6878:2004 (EN ISO), Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method Ersätter EN 1189:1996 ISO 9562:2004 (EN ISO), Water quality - Determination of adsorbable organically bound halogens (AOX) Ersätter EN 1485:1996, Water quality - Determination of adsorbable organically bound halogens (AOX) Indragen ISO 10304-4:1997, Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination 10695:2000, Vattenundersökningar - Bestämning av några utvalda organiska kväve- och fosforföreningar - Gaskromatografiska metoder (ISO 10695:2000) 6878:2005, Vattenundersökningar - Bestämning av fosfor - Spektrofotometrisk metod med ammoniummolybdat (ISO 6878:2004) Ersätter SS-EN 1189:1997 9562:2005, Vattenundersökningar - Bestämning av adsorberbara organiskt bundna halogener (AOX) (ISO 9562:2004) Ersätter SS-EN 14851997, upphävd 2005-02-18. 10304-4:1999, Vattenundersökningar - Bestämning av lösta anjoner med jonkromatografi - Del 4: Bestämning av klorat, klorid och klorit i vatten med låg föroreningsgrad (ISO 10304-4:1997)