Metallic Indoor PK Termination Boxes Prysmian Part Numbers: see below Metallic PK Termination Boxes are designed for the termination, branching and distribution of fibre optic cables in telecommunication, CATV and LAN networks under dry indoor conditions. These are suitable for wall-mounted installations with small or intermediate numbers of fibres. The constructions of the boxes are clear and simple and independent of cable constructions and are easy to install, maintain and upgrade. The boxes includes grounding bars, splice holders or splice trays and cable entrance materials. Features and Benefits Universal termination boxes for all type of optical cables in dry indoor conditions. The constructions of the boxes are clear and simple and independent of cable constructions. Easy to install, maintain and upgrade. Metallic construction can stand rough handling during operation. Material is powder painted steel plate Easy to making earthing of metallic parts of the optical cables. Page 1 of 4
Indoor Termination Box PK-56 PK-56 is suitable for wall-mounted installations with small number of fibres. Includes a box, a cover with screws, a grounding bar and a splice holder. One cable inlet for cable diam. max 11.8 mm. Capacity for 12 splices and 4 SC adapters. No need for separate protection tubes when terminating central tube type fibre optic cables. Dimensions are 120 x 104 x 29 mm (h x w x d). Prysmian Part No. XCPSC01802 PK-56/SC Termination box Indoor Termination Box PK-55 PK-55 is suitable for wall-mounted installations with small number of fibres. Includes a box, a cover with a screw, a grounding bar and a splice holder. Two cable inlets for cable diam. max 13 mm. Capacity for 12 splices and 6 SC adapters. No need for separate protection tubes when terminating central tube type fibre optic cables. Adapters will be mounted to a adapter plate under the cover. Dimensions are 155 x 140 x 40 mm (h x w x d). Three slots for the entrance of interconnection cables max diam. 3.0 mm. Prysmian Part No. XCPSC01552 K-55/SC Termination box Indoor Termination Box PK-50 PK-50 is suitable for wall-mounted installations with small number of fibres. Includes a box, a cover with screws, a grounding bar and a splice holder. One cable inlet for cable diam. max. 16 mm. Capacity for 12 splices and 4 SCdouble adapters. No need for separate protection tubes when terminating central tube type fibre optic cables. Dimensions are 120 x 104 x 29 mm (h x w x d). Prysmian Part No. XCPSC01551 PK-50/SC-D Termination box Page 2 of 4
Indoor Termination Box PK-100 PK-100 termination box is designed for the termination, branching and distribution of fibre optic cables. Capacity for 3 cable inlets for cables max 20 mm and for max 48 splices with two KT-1412/24 splice trays. 12 entrances for pigtails or alternatively places for 12 FC*D, ST or SC connector adaptors. Wall-mounted with four screws. Can be used as a joint box with max. 48 fusion splices. Includes a frame, a cover with screws, KT-1016 entrance and grounding materials for one outdoor cable and one KT-1412/24 splice tray for 24 fusion splices. Dimensions are 350 x 207 x 66 mm (h x w x d). Prysmian Part No. XCPSC01555 PK-100/SC Termination box XCPSC01556 PK-100/ST-FC*D Termination box Indoor Termination Box PK-200 PK-200 termination box is designed for the termination, branching and distribution of fibre optic cables. Capacity for 3 cable inlets for cables max 20 mm and for max 96 splices with four KT-1412/24 splice trays. 24 entrances for pigtails or alternatively places for 24 FC*D, ST or SC connector adaptors. Two cable inlets can be connected to one wide inlet that gives the possibility to bring in and take out the cable from the box without cutting all the fibres. Wall-mounted with four screws. Can be used as a joint box with max. 48 fusion splices. Includes a frame, a cover with screws, KT-1016 entrance and grounding materials for one outdoor cable and one KT- 1412/24 splice tray for 24 fusion splices. Dimensions are 400 x 210 x 120 mm (h x w x d). Prysmian Part No. XCPSC01557 PK-200/SC Termination box XCPSC01558 PK-200/ST-FC*D Termination box Indoor Termination Box PK-300 The PK-300 termination cabinet is designed for the termination and distribution of various types of fibre optic cables to a wall-mountable and dust-proof termination. Patch panel divides the box into splicing and crossconnection sections. Splicing section protected with a separate door. Crossconnection section has cable entrances to both, up and down, directions. Two cable inlets on the top and on the bottom can be connected to one wide inlet that gives the possibility to bring in and take out the cable from the box without cutting all the fibres. Capacity for 5 KT-1412/24 splice trays (120 fusion splices) and 48 SC, ST or FC*D connectors. Dimensions are 400 x 480 x 155 mm (h x w x d). Included materials: Frame and cover, Mounting and grounding bar, KT-1412/24 splice tray, KT- 1016 entrance material for one outdoor cable, Stress relief bars for 24 pcs. of diam. 2 mm patch cords of 2 pcs, Cable inlets, of which 3 are on the top and 3 on the bottom, Patch panel for 48 SC, ST or FC*D connector adaptors. Prysmian Part No. XCPSC01559 PK-300/SC Termination box XCPSC01560 PK-300/ST-FC*D Termination box Page 3 of 4
Outdoor/Indoor Termination Box PK-107 Easy access small diameter fibre optic joint box. For indoor and outdoor use. Designed to be used inside pole constructions e.g. in traffic control lines. Two heath shrinkable entrances for max diameter of 16 mm cables and one mechanically shrinkable entrance for max diameter of 11 mm cable. Capacity for 12 fibre splices and for 2 SC double connector adaptors. Metallic parts can be mounted inside the box. No need for separate protection tubes when using central tube type of cables. Dimensions are 336 x 88 x 40 mm (h x w x d). Included materials: Frame PK-107, Cover, Wall fixing accessory, Plate for 2 SC double connector adapters, Splice tray for 12 fusion splices, Grounding bar for two cables and Sealing materials for closure and cabling entries. Prysmian Part No. XJTSC00861 PK-107 FO Special joint closure box Indoor Termination Box PK-100A PK-100A termination box is designed for the termination, branching and distribution of fibre optic cables with small or intermediate numbers of fibres. Capacity for 2 cable inlets, 24 splices and 12 SC, ST or FC*D connector adaptors. Cable inlets can be connected to one wide inlet that gives the possibility to bring in and take out the cable from the box without cutting all the fibres. No need for separate protection tubes when terminating central tube type fibre optic cables. Dimensions are 160 x 356 x 50 mm (h x w x d). Included materials: Frame PK-100A, Cover with screws, Mounting and grounding bar, Protection plate with marking tape for patch cords, KT-1020 entrance and grounding materials for one outdoor cable. Prysmian Part No. XCPSC01554 PK-100A/SC Termination box Page 4 of 4
Additional Items Splice Tray KT-1412/24 Splice tray for 24 fusion splices. Can be used in PK-100, PK-200 and PK- 300 Termination Boxes. Material powder painted steel plate. Dimensions are 270 x 158 x 7.5 mm (h x w x d). Prysmian Part No. XJTSC00884 KT-1412/24 Splice tray Entrance Material KT-1016 Entrance and grounding material for one outdoor cable of outer dia. max 20 mm in PK-100, PK-100A, PK-200 and PK-300 Termination Boxes. Prysmian Part No. XJTSC00879 KT-1016 Entrance material Entrance Material KT-1020 Entrance and grounding kit KT-1020 is designed for fastening and grounding of stranded loose-tube type fibre optic cables, outer dia. max 20 mm in PK- 100, PK-100A, PK-200 and PK-300 termination boxes. Prysmian Part No. JTSC00880 KT-1020 Entrance material Please contact your local sales office listed on Prysmian Group 2012, All Rights Reserved. The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of Prysmian Group. The information is believed correct at the time of issue. Prysmian Group reserves the right to amend this specification without notice. This specification is not contractually valid unless specifically authorised by Prysmian Group. Page 5 of 4