Configurazione Rete VoIP



Similar documents
Configurazione Rete VoIP

CS3695/M6-109 Lab 8-NPS02 VOIP Sniffing Ver. 8 Rev. 0

Lab Configuring Syslog and NTP (Instructor Version)

Motorola TEAM WSM - Cisco Unified Communications Manager Express (CME) Integration

Lab 5.3.9b Managing Router Configuration Files Using TFTP

Case Study 1: Registering IP Phones with a remote Call

Simple MPLS network topology for Dynamips/Olive

Lab Configure Local AAA on Cisco Router

Lab 8.4.3b Managing Cisco IOS images with ROMMON and TFTP

Managing and Configuring Cisco VoIP Devices

Brest. Backup : copy flash:ppe_brest1 running-config

ADTRAN SBC and Cisco Call Manager Express SIP Trunk Interoperability

Planning Maintenance for Complex Networks

Table of Contents. Cisco Using the Cisco IOS Firewall to Allow Java Applets From Known Sites while Denying Others

Chapter 1: Planning Maintenance for Complex Networks. TSHOOT v6 Chapter , Cisco Systems, Inc. All rights reserved.

How To Configure A Cisco Router With A Cio Router

Lab 2.1 Configure CME using the CLI and Cisco IP Communicator

Skills Assessment Student Training (Answer Key)

Guaranteeing QoS in a Crises Response

Configuring Fax Pass-Through

Lab Configure Syslog on AP

Integrated Data and Voice Services for ISDN PRI Interfaces on Multiservice Access Routers

The Cisco IOS Firewall feature set is supported on the following platforms: Cisco 2600 series Cisco 3600 series

Cisco Routers and Switches

Lab 8.4.3a Managing Cisco IOS Images with TFTP

Configuring a Cisco 2509-RJ Terminal Router

TotalCloud Phone System

CCNA Exploration 4.0: ESwitching Basic Switching / Wireless PT Practice SBA. Switch S1 S1#sh ru Building configuration...

Lab 7: Firewalls Stateful Firewalls and Edge Router Filtering

Ejemplo de configuración de punta a punta SBC en un Cisco 7600 Series Router

Implementing Cisco Unified Communications Voice over IP and QoS v8.0 (CVOICE v8.0) Version: Demo. Page <<1/8>>

Lab Creating a Network Map using CDP Instructor Version 2500

- Basic Router Security -

LAN-Cell to Cisco Tunneling

3.1 Connecting to a Router and Basic Configuration

Connecting to the Firewall Services Module and Managing the Configuration

Configuring Basic Broadband Internet Access

Objectives. Background. Required Resources. CCNA Security

Configuration Professional: Site to Site IPsec VPN Between Two IOS Routers Configuration Example

Configuring Voice and Data Support on VWIC3s

Skills Assessment Student Training Exam

Configuring Devices for Use with Cisco Configuration Professional (CCP) 2.5

Cisco 2621 Gateway-PBX Interoperability: Lucent/Avaya Definity G3si V7 PBX with Cisco CallManager Using T1 PRI NI-2 for an H.

This document is exclusive property of Cisco Systems, Inc. Permission is granted to print and copy this document for non-commercial distribution and

Lab Configure Basic AP Security through IOS CLI

BRI to PRI Connection Using Data Over Voice

Connect the Host to attach to Fast Ethernet switch port Fa0/2. Configure the host as shown in the topology diagram above.

Lab Load Balancing Across Multiple Paths Instructor Version 2500

Proposal for implementation of VoIP at XYZ hospital.

Configuring a Leased Line

Enabling Management Protocols: NTP, SNMP, and Syslog

ICND1 Lab Guide Interconnecting Cisco Networking Devices Part 1 Version 2.0. Labs powered by

System Components PBX Model. Configuration Tasks

Felix Rohrer. PT Activity 7.5.3: Troubleshooting Wireless WRT300N. Topology Diagram

Output Interpreter. SHOW RUNNING-CONFIG SECURITY Analysis SHOW RUNNING-CONFIG - FW Analysis. Back to top

and 2, implemented With Cisco Unified Border Control Element (CUBE)

Chapter 8 Lab B: Configuring a Remote Access VPN Server and Client

Consolidated Packages and SubPackages Management

ICND IOS CLI Study Guide (CCENT)

Objectives Understand Cisco IOS system architecture components. Work with the Cisco IOS Command Line Interface (CLI) and common commands.

Network Security Knowledge is Everything! Network Operations

- The PIX OS Command-Line Interface -

Configuring System Message Logging

Note: This case study utilizes Packet Tracer. Please see the Chapter 5 Packet Tracer file located in Supplemental Materials.

Lab 5.5 Configuring Logging

PT Activity: Configure Cisco Routers for Syslog, NTP, and SSH Operations

Lab 3.5.1: Basic VLAN Configuration (Instructor Version)

Configuring a Router

Using LiveAction with Cisco Secure ACS (TACACS+ Server)

Table of Contents. Cisco How to Download a Software Image to a Cisco 2600 via TFTP Using the tftpdnld ROMmon Command

Cisco Configuration Professional Quick Start Guide

Applicazioni Telematiche

Basic Configuration of the Cisco Series Internet Router

Configuring the Cisco Secure PIX Firewall with a Single Intern

Remote Access VPN Business Scenarios

Telnet, Console and AUX Port Passwords on Cisco Routers Configuration Example

Lab 5-5 Configuring the Cisco IOS DHCP Server

Network Security 2. Module 6 Configure Remote Access VPN

Lab: Basic Router Configuration

LAB Configuring NAT. Objective. Background/Preparation

Lab Introductory Lab 1 - Getting Started and Building Start.txt

Basic Router Configuration

Secure Network Foundation Implementation Guide for Single Site Deployments

One-Step Lockdown with Cisco SDM

Configuring the MNLB Forwarding Agent

Chapter 4: Lab A: Configuring CBAC and Zone-Based Firewalls

Validated Integrations: CUCM 10.x with xic version 4.0 SU-6 (support included for all 4.0 SU s) Version 4.08

Deployment Guidelines for QoS Configuration in DSL Environment

Basic Router Configuration Using Cisco Configuration Professional

LAB MANUAL for Computer Network

Table of Contents. Cisco Configuring IPSec Cisco Secure VPN Client to Central Router Controlling Access

Table of Contents. Cisco How to Download a Software Image to a Cisco 2600 through TFTP Using the tftpdnld ROMmon Command

- Advanced IOS Functions -

Cisco IOS Voice Gateway PBX Interoperability: Avaya 8500 Communications Manager 2.1 to T1 QSIG with H.323

Center for Internet Security Gold Standard Benchmark for Cisco IOS

Module 6 Configure Remote Access VPN

Lab Load Balancing Across Multiple Paths

CCNA Security. Chapter Two Securing Network Devices Cisco Learning Institute.

APNIC Members Training Course Security workshop. 2-4 July, Port Vila Vanuatu. In conjunction with PACNOG 4

Using a Sierra Wireless AirLink Raven X or Raven-E with a Cisco Router Application Note

Transcription:

Configurazione Rete VoIP 1x CISCO 7940G 1x CISCO 3725 with cme-full-7.0.0.1.tar 1x CISCO IP Communicator Startup Config router CISCO 3725 Procedura Operativa: Topologia di rete Operazioni preliminary sul CISCO 3725 Router 3725 Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9_SNA-M), Version 12.4(25d), RELEASE SOFTWARE (fc1) with 64Mbit di Flash Format flash: del Router R1#copy run flash: Destination filename [r1-confg]? Erase flash: before copying? [confirm]n Verifying checksum... OK (0x6C65) 901 bytes copied in 2.980 secs (302 bytes/sec) R1#format flash: Format operation may take a while. Continue? [confirm] Format operation will destroy all data in "flash:". Continue? [confirm] Ing. Nicola Cappuccio www.studiocappuccio.net info@studiocappuccio.net 1

Current Low End File System flash card in flash will be formatted into DOS File System flash card Continue? [confirm] Format: Drive communication & 1st Sector Write OK... Writing Monlib sectors....... Monlib write complete Format: All system sectors written. OK... Format: Total sectors in formatted partition: 130911 Format: Total bytes in formatted partition: 67026432 Format: Operation completed successfully. Format of flash complete interfaces Fastethernet 0/0 192.168.100.1/24 Operazioni preliminari sul PC Abilitare un interfaccia di loopback 192.168.100.2/24 e collegare via Ethernet il pc ed il 7940G Abilitare il server TFTP sull indirizzo di loopback 192.168.100.2/24 Download via TFTP del cme-full-7.0.0.1.tar from PC to CISCO Router router#archive tar /xtract tftp://<local host>/cme-full-7.0.0.1.tar flash: Configurare DHCP su CISCO 3725 Abilititare server dhcp router# configure terminal router (config)# ip dhcp excluded-address 192.168.100.1 192.168.100.10 router (config)# ip dhcp pool VOICE_SCOPE router (dhcp-config)# network 192.168.100.0 255.255.255.0 router (dhcp-config)# default-router 192.168.100.1 router (dhcp-config)# option 150 ip 192.168.100.1 router (dhcp-config)# dns-server 4.2.2.2 Ing. Nicola Cappuccio www.studiocappuccio.net info@studiocappuccio.net 2

Abilitare il debug router#debug ip dhcp server events Configurare I Servizi Telefonici router # dir flash:/phone/7940-7960 Directory of flash:/phone/7940-7960/ Laboratorio 24/11/2014 98 -rw- 129824 May 12 2008 21:33:56-07:00 P00308000500.bin 99 -rw- 458 May 12 2008 21:33:56-07:00 P00308000500.loads 100 -rw- 705536 May 12 2008 21:34:00-07:00 P00308000500.sb2 101 -rw- 130228 May 12 2008 21:34:00-07:00 P00308000500.sbn 129996800 bytes total (28583936 bytes free) router # configure terminal Enter configuration commands, one per line. End with CNTL/Z. router (config)# tftp-server flash:/phone/7940-7960/p00308000500.bin alias P00308000500.bin router (config)# tftp-server flash:/phone/7940-7960/p00308000500.loads alias P00308000500.loads router (config)# tftp-server flash:/phone/7940-7960/p00308000500.sb2 alias P00308000500.sb2 router (config)# tftp-server flash:/phone/7940-7960/p00308000500.sbn alias P00308000500.sbn router (config)# telephony-service router (config-telephony)# ip source-address 192.168.100.1 router(config-telephony)#create cnf-files router (config-telephony)#do sh flash -#- --length-- -----date/time------ path 1 0 Mar 1 2002 01:58:18 +01:00 bacdprompts. 46 0 Mar 1 2002 02:00:12 +01:00 phone 47 0 Mar 1 2002 02:00:12 +01:00 phone/7940-7960 48 129824 Mar 1 2002 02:00:16 +01:00 phone/7940-7960/p00308000500.bin 49 458 Mar 1 2002 02:00:16 +01:00 phone/7940-7960/p00308000500.loads Ing. Nicola Cappuccio www.studiocappuccio.net info@studiocappuccio.net 3

50 705536 Mar 1 2002 02:00:42 +01:00 phone/7940-7960/p00308000500.sb2 51 130228 Mar 1 2002 02:00:46 +01:00 phone/7940-7960/p00308000500.sbn. router(config-telephonyr)#load 7960-7940 P00308000500 Updating CNF files CNF files updating complete router(config-telephonyr)#reset sequence-all router(config-telephony)#create cnf-files router(config-telephony)#reset sequence-all router(config-telephony)#exit router (config-telephony)# max-ephones? <1-30> Maximum phones to support router (config-telephony)# max-ephones 10 router (config-telephony)# max-dn? <1-150> Maximum directory numbers supported <cr> router (config-telephony)# max-dn 10 router (config)#ephone-dn 1 router (config-ephone-dn)#number 1000 router (config-ephone-dn)#exit router (config)#ephone-dn 2 router (config-ephone-dn)#number 2000 router (config-ephone-dn)#exit router # show ephone */restituisce la lista degli ephone presenti sulla rete con il mac-address */associazione IP-Phone Numeri e Linee router (config)# ephone 1 router (config-ephone)# mac-address XXXX.XXXX.XXXX router (config-ephone)# button 1:1 router (config-ephone)# restart Ing. Nicola Cappuccio www.studiocappuccio.net info@studiocappuccio.net 4

router (config-ephone)# exit router (config)# ephone 2 Laboratorio 24/11/2014 router (config-ephone)# mac-address YYYY.YYYY.YYYY router (config-ephone)# button 1:1 router (config-ephone)# restart router (config-ephone)# exit Setting the Clock of a Cisco Device with NTP router #clock set 11:13:00 28 Nov 2014 router # *Nov 28 11:13:00.000: %SYS-6-CLOCKUPDATE: System clock has been updated from 00:01:13 UTC Fri Mar 1 2002 to 11:13:00 UTC Fri Nov 28 2014, configured from console by console. router # router #configure terminal router (config)#ntp server 193.204.114.232 router (config)#clock timezone ITALY +1 router (config)#ntp master Startup-config 3725 Last configuration change at 02:08:08 ITALY Fri Mar 1 2002 NVRAM config last updated at 02:27:07 ITALY Fri Mar 1 2002 version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption hostname R1 boot-start-marker boot-end-marker Ing. Nicola Cappuccio www.studiocappuccio.net info@studiocappuccio.net 5

no aaa new-model memory-size iomem 5 clock timezone ITALY 1 no ip icmp rate-limit unreachable ip cef no ip dhcp use vrf connected ip dhcp excluded-address 192.168.100.1 192.168.100.10 ip dhcp pool VOICE_SCOPE network 192.168.100.0 255.255.255.0 default-router 192.168.100.1 option 150 ip 192.168.100.1 no ip domain lookup ip auth-proxy max-nodata-conns 3 ip admission max-nodata-conns 3 ip tcp synwait-time 5 ip ssh version 1 interface FastEthernet0/0 ip address 192.168.100.1 255.255.255.0 duplex auto speed auto interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ip forward-protocol nd Ing. Nicola Cappuccio www.studiocappuccio.net info@studiocappuccio.net 6

no ip http server no ip http secure-server no cdp log mismatch duplex tftp-server flash:/phone/7940-7960/p00308000500.bin alias P00308000500.bin tftp-server flash:/phone/7940-7960/p00308000500.loads alias P00308000500.loads tftp-server flash:/phone/7940-7960/p00308000500.sb2 alias P00308000500.sb2 tftp-server flash:/phone/7940-7960/p00308000500.sbn alias P00308000500.sbn control-plane telephony-service load 7960-7940 P00308000500 max-ephones 10 max-dn 10 ip source-address 192.168.100.1 port 2000 create cnf-files version-stamp 7960 Mar 01 2002 01:38:27 max-conferences 8 gain -6 ephone-dn 1 number 1000 ephone-dn 2 number 2000 ephone 1 mac-address 001F.6C80.7F50 button 1:1 ephone 2 mac-address 0200.4C4F.4F50 button 1:2 line con 0 exec-timeout 0 0 privilege level 15 logging synchronous line aux 0 exec-timeout 0 0 privilege level 15 logging synchronous line vty 0 4 Ing. Nicola Cappuccio www.studiocappuccio.net info@studiocappuccio.net 7

login ntp master 1 ntp server 193.204.114.232 end Laboratorio 24/11/2014 Application Note 7940G direttamente connesso alla porta Ethernet del PC. Disattivare windows firewall Ing. Nicola Cappuccio www.studiocappuccio.net info@studiocappuccio.net 8