FUTRUS WALL-MOUNT VANITY SINK MODEL FWS_3018R ADA PRODUCT SPECIFICATION The wall-mount vanity sink shall be made of Corian solid surface. Bathroom module shall be 30 (762 mm) in length, 18 (457 mm) in width, and 34 (864 mm) in height. Bathroom sink shall have 8 (203 mm) centers (-8), 4 (102 mm) centers (-4), or single hole (-1). Bathroom sink shall have no overflow and an offset drain. STANDARD FEATURES Corian solid surface construction Wall-mount Offset drain for infection control No overflow Corian solid surface integral coved splash Access panel with security screws Soft radius front edge Integral Corian oblong shape bowl 30 (762mm) x 18 (457mm) x 34 (864mm) Designed to meet and exceed current ANSI Standards (A112.192) handwash sinks required minimum size of 15 x 10 x 6 ½ SPECIFIED MODEL MODEL DESCRIPTION FWS_3018R_8 Vanity sink with 8 (203 mm) centers FWS_3018R_4 Vanity sink with 4 (102 mm) centers FWS_3018R_1 Vanity sink with single hole COLOR OFFERINGS _00 Glacier White _01 Cameo White _02 Bisque _03 Bone _04 Vanilla Additional colors available, contact Futrus EXAMPLE MODEL SPECIFICATION F W S _ 3 0 1 8 R _ 8 _ 0 0 Model# Center Color info@ PAGE 1 OF 2
FUTRUS WALL-MOUNT BATH SINK TECHNICAL INFORMATION FWS_3018R Basin Area FWS_3018R 22-1/4 (565 mm) x 12-1/4 (311 mm) Water Depth 4-1/2 (114 mm)* Drain Hole 1-3/4 (44 mm) Faucet Hole 1-3/8 (35 mm) *approximate measurements for comparison use only. INCLUDED COMPONENTS FOB1222 Vanity Sink: 8 (203 mm) centers FOB1222 Vanity Sink: 4 (102 mm) centers FOB1222 Vanity Sink: Single hole Shroud Hanging Bracket 6028 FWS_3018R_8 FWS_3018R_4 FWS_3018R_1 FWS_3033R INSTALLATION NOTES Install this product according to the installation guide. Will comply with ADA when installed per Section 606 Lavatories of the 2010 ADA Standards for Accessible Design. Will comply with CSA B651 when installed per Clause 4.3.3 of the standard. Will comply with OBC when installed per Clause 3.8.3.11 Finished Wall FWS_3018R_1 2 3/4" (70mm) 8 3/4" (222 mm) 18" (457 mm) [FWS-3019] 24 (610 mm) 30" (762 mm) Wall Mount Bracket Centerline of wall mounting bracket 18" (457 mm) Security Screws 4" (102 mm) Access Panel 2 5 " ( 6 3 5 m m ) 24" (610 mm) 27" (686 mm) 31" (787 mm) 34" (864 mm) 8" (203 mm) 34" (864 mm) 27" (686 mm) Finished Floor Acceptable Plumbing Area 6" (152 mm) max 9" (229 mm) CL MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES. ADJUST DIMENSIONS AS REQUIRED TO COMPLY WITH FEDERAL, STATE, AND LOCAL CODES. CHECK LOCAL CODES. Top of front rim mounted 864mm (34 ) from finished floor. info@ PAGE 2 OF 2
Futrus wall-mount Sink specification sheet model FWS-3021R ADA - Rounded Front standard features Corian solid surface construction Wall-mount Offset drain for infection control No overflow Corian solid surface integral coved splash Access panel with security screws Rounded front edge Integral Corian bowl 30 (762 mm) x 21 (533 mm) x 34 (864 mm) Sink included: F1513 - additional sinks available Designed to meet current ANSI Standards (A112.192) handwash sinks PRODUCT SPECIFICATION The wall-mount vanity sink shall be made of Corian solid surface. Bathroom module shall be 30 (762 mm) in length, 21 (533 mm) in width, and 34 (864 mm) in height. Bathroom sink shall have 8 (203 mm) centers (-8), 4 (102 mm) centers (-4), or single hole (-1). Bathroom sink shall have no overflow and an offset drain. COlor offerings _00 Glacier White _01 Cameo White _02 Bisque _03 Bone _04 Vanilla Additional colors available, contact Futrus Specified MODEL MODEL DESCRIPTION FWS_3021R_8 Vanity sink with 8 (203 mm) centers FWS_3021R_4 Vanity sink with 4 (102 mm) centers FWS_3021R_1 Vanity sink with single hole MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES. ADJUST DIMENSIONS AS REQuireD TO COMPLY WITH FEDERAL, STATE, AND LOCAL CODES complies with federal, state codes. CHECK LOCAL CODES. Top of front rim mounted 864mm (34 ) from finished floor. Example model specification F W S _ 3 0 2 1 R _ 8 _ 0 0 Model# Center Color info@
Futrus wall-mount sink Technical Information - FWS_3021R Basin Area FWS_3021R 22 (559 mm) x 12 Water Depth 6-1/2 (156 mm)* Drain Hole 1-3/4 (44 mm) Faucet Hole 1-3/8 (35 mm) *approximate measurements for comparison use only. included components F1513 Vanity Sink: 8 (203 mm) centers FWS_3020R_8 F1513 Vanity Sink: 4 (102 mm) centers FWS_3020R_4 F1513 Vanity Sink: Single hole FWS_3020R_1 Shroud FWS_3033R Hanging Bracket 6028 installation notes Install this product according to the installation guide. Will comply with ADA when installed per Section 606 Lavatories of the 2010 ADA Standards for Accessible Design. Will comply with CSA B651 when installed per Clause 4.3.3 of the standard. Will comply with OBC when installed per Clause 3.8.3.11 Wall Mount Bracket Centerline of wall mounting bracket Security Screws Access Panel 25" (635 mm) 24" (610 mm) 27" (686 mm) 31" (787 mm) 34" (864 mm) Finished Floor Acceptable Plumbing Area Finished Wall CL Finished wall 21" (533 mm) 2 3/4" (70mm) 3" (76mm) 4" (102 mm) 7 1/2" (191 mm) 21" (533 mm) 13 3/4" (350 mm) 15 1/4" (387 mm) 34" (864 mm) 8" (203 mm) 27" (686 mm) 30" (762 mm) 9" (229 mm) 9" (229 mm) MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES. ADJUST DIMENSIONS AS REQuireD TO COMPLY WITH FEDERAL, STATE, AND LOCAL CODES complies with federal, state codes. CHECK LOCAL CODES. Top of front rim mounted 864mm (34 ) from finished floor. info@
Futrus wall-mount bath module specification sheet model FWS-3021S ADA - Straight Front standard features Corian solid surface construction Wall-mount Offset drain for infection control No overflow Corian solid surface integral coved splash Access panel with security screws Straight front edge Integral Corian bowl 30 (762 mm) x 21 (533 mm) x 34 (864 mm) Sink included: F1513 - additional sinks available Designed to meet current ANSI Standards (A112.192) handwash sinks PRODUCT SPECIFICATION The wall-mount vanity sink shall be made of Corian solid surface. Bathroom module shall be 30 (762 mm) in length, 21 (533 mm) in width, and 34 (864 mm) in height. Bathroom sink shall have 8 (203 mm) centers (-8), 4 (102 mm) centers (-4), or single hole (-1). Bathroom sink shall have no overflow and an offset drain. COlor offerings _00 Glacier White _01 Cameo White _02 Bisque _03 Bone _04 Vanilla Additional colors available, contact Futrus Specified MODEL MODEL DESCRIPTION FWS_3021S_8 Vanity sink with 8 (203 mm) centers FWS_3021S_4 Vanity sink with 4 (102 mm) centers FWS_3021S_1 Vanity sink with single hole MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES. ADJUST DIMENSIONS AS REQuireD TO COMPLY WITH FEDERAL, STATE, AND LOCAL CODES complies with federal, state codes. CHECK LOCAL CODES. Top of front rim mounted 864mm (34 ) from finished floor. Example model specification F W S _ 3 0 2 1 S _ 8 _ 0 0 Model# Center Color info@
Futrus wall-mount bath module Technical Information - FWS_3021S Basin Area FWS_3021S 22 (559 mm) x 12 Water Depth 6-1/2 (156 mm)* Drain Hole 1-3/4 (44 mm) Faucet Hole 1-3/8 (35 mm) *approximate measurements for comparison use only. included components F1513 Vanity Sink: 8 (203 mm) centers FWS_3020S_8 F1513 Vanity Sink: 4 (102 mm) centers FWS_3020S_4 F1513 Vanity Sink: Single hole FWS_3020S_1 Shroud FWS_3033S Hanging Bracket 6028 installation notes Install this product according to the installation guide. Will comply with ADA when installed per Section 606 Lavatories of the 2010 ADA Standards for Accessible Design. Will comply with CSA B651 when installed per Clause 4.3.3 of the standard. Will comply with OBC when installed per Clause 3.8.3.11 Wall Mount Bracket Centerline of wall mounting bracket Security Screws Access Panel 25" (635 mm) 24" (610 mm) 27" (686 mm) 31" (787 mm) 34" (864 mm) Finished Floor Acceptable Plumbing Area Finished Wall CL 18" 21 (457 (533 mm) Finished wall 2 3/4" (70mm) 4" (102 mm) 7 1/2" (191 mm) 21" (533 mm) 13 3/4" (350 mm) 15 1/4" (387 mm) 8" (203 mm) 34" (864 mm) 27" (686 mm) 30" (762 mm) 6" (152 mm) max 9" (229 mm) MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES. ADJUST DIMENSIONS AS REQuireD TO COMPLY WITH FEDERAL, STATE, AND LOCAL CODES complies with federal, state codes. CHECK LOCAL CODES. Top of front rim mounted 864mm (34 ) from finished floor. info@