e-dpp 4.0.2 May 2013 Microsoft Windows 2003 Server, XP, Vista, 7 Access Database ELTECHS Engineering and Consulting Co., Ltd., Japan www.eltechs.co.jp Tel No. +81 (47) 490-1010 Fax No. +81 (47) 490-1011 E-mail etap@eltechs.co.jp Copyright 2013 ELTECHS Engineering and Consulting Co., Ltd., Japan. All rights reserved. Certain names and/or logos used in this document may constitute trademarks, service marks, or trade names of ELTECHS Engineering and Consulting Co., Ltd 1 of 12
This document provides a step-by-step installation of e-dpp 4.0.2. For information on e-dpp 4.0.2 Network License, please refer to Chapter 2 Setup of the User Guide. The e-dpp 4.0.2 Installer provides simple and comprehensive instructions that must be followed to successfully complete the installation of the program. System Requirements Operating Systems Microsoft Windows XP Professional (Service Pack 2 or higher) Microsoft Windows Vista Business or Ultimate Microsoft Windows 7 Professional or Ultimate Microsoft Windows Server 2003 (Service Pack 1 or higher) Other Software Requirements Microsoft Excel 2002 (from Office XP) or 2003 for Import of *.xls format file Microsoft Excel 2007 or 2010 for Import of *.xlsx format file Microsoft Excel 97-2000, 2002 (from Office XP), 2003, 2007 or 2010 for Export Minimum PC Requirements Intel Pentium III 512 MB of RAM 450 MB available hard drive space 1280x768 resolution monitor USB or Parallel Port CD ROM Drive Recommended Operating Systems, Software and PC Configuration Microsoft Windows XP Professional (Service Pack 3) Intel Pentium IV or higher 1 GB of RAM 2 GB hard disk space 1280x1024 resolution monitor USB or Parallel Port CD ROM Drive Security Key e-dpp uses the following two types of security hardware keys to license the use of the software: Stand-Alone License Hardware Key ( Placed and resides on your computer) Network License Hardware Key ( Placed and resides on a License Manager Server) The hardware keys are of two types; the USB and Parallel Port keys. The USB key is the one shipped with the software. The Parallel port key is available on request in lieu of the USB key. 2 of 12
USB Key Parallel Port Key I. License Key Drivers Installation (1) Insert the "e-dpp 4.0.2 Installation CD" into the CD Drive of the computer. The installer program will auto-start. Note: If the installer program does not auto-start, browse the CD, locate and double click the "edppinstaller.exe". (2) On the "e-dpp Install Menu" main dialog box, click "Install License Manager" button. (3) On "WIBU-KEY Set-up" dialog box, click the "Next" button. (4) The following dialog box will be displayed. a. Check additional language as necessary. b. Click the "Next" button. (See image on the next page) 3 of 12
a b (5) Click "Next" button to continue. (6) Click "Yes" button on the succeeding dialog to confirm creation of the folder. (7) On the succeeding dialog box, do the following: a. Uncheck all the options b. Click "Next" button to continue. a b 4 of 12
(8) Click "Next" button to install the components. 8 (9) Click "Next" button to proceed. 9 (10) Click "Finish" button. (11) Click "OK" button to confirm successful installation. 5 of 12
II. e-dpp Installation Notes: For Windows Vista and Windows 7 operating systems, you must turn off the User Account Control prior to the installation by doing the following: For Windows Vista: i. Select Start Control Panel from the windows taskbar. ii. On the Control Panel applet, click User Accounts icon. iii. On the Make changes to your user account view, click Turn User Account Control on or off option. iv. On the Turn on User Account Control (UAC) to make your computer more secure view, uncheck Use User Account Control (UAC) to help protect your computer option and click OK button. For Windows 7: i. Select Start Control Panel from the windows taskbar. ii. On the Control Panel applet, click User Accounts icon. iii. On the Make changes to your user account view, click Change User Account Control Settings option. iv. On the User Account Control Settings view, adjust the slider to Never notify and click OK button. (1) To install e-dpp, you must have administrative privilege access to your computer. (2) Close all the applications that are currently running. (3) Insert the "e-dpp 4.0.2 Installation CD" into the CD Drive of the computer. The installer program will auto-start. Note: If the installer program does not auto-start, browse the CD, locate and double click "edppinstaller.exe". 6 of 12
(4) On the "e-dpp Install Menu" main dialog box, click "Install e-dpp 4.0.2" button. (5) Installation Wizard of Microsoft Access database engine 2010 (English) will be displayed as shown below: Click Next > button. Note: If your PC has any of the below application or utility programs already installed, you don t have to install this program and click Cancel button: - Microsoft Access 2007 (from Office Pack 2007 Professional) - Microsoft Access 2010 (from Office Pack 2010 Professional) - Microsoft Access database engine 2007 (English) - Microsoft Access database engine 2007 (Japanese) - Microsoft Access database engine 2010 (English) - Microsoft Access database engine 2010 (Japanese) 7 of 12
(6) Check I accept the terms in the License Agreement checkbox and click Next > button. (7) Click Install button. (8) Click OK button. 8 of 12
(9) Click "Next" button on the Welcome screen to continue. (10) Click "Yes" button to accept the terms and conditions of the preceding License Agreement. (11) Click "Next" button to install e-dpp 4.0.2 on the specified destination folder. 9 of 12
(12) The installer displays the Setup Status screen and starts copying files to your installation of e-dpp. By default, the Setup program will create a program folder named edppv402, which can be renamed by the user. Note: If the following message is displayed during the installation, click Cancel button. (13) Click Finish button to confirm a successful installation. 10 of 12
III. License Configuration (1) Select "Start Control Panel" and double click the "WIBU-KEY" icon. (2) On WIBU-KEY Control Panel Applet, do the following: a. Select "Network" tab b. Select "User Specific" on the drop down list. c. On WIBU-KEY Subsystems frame, uncheck all option except "Local (Kernel)". d. Click "Apply" button to save selected options. e. Click "OK" button to exit Control Panel Applet. b c e a d (3) e-dpp software can now be run. Note: Plug USB License Key before running e-dpp software. Generally, Windows will automatically locate the USB drivers. 11 of 12
IV. Running e-dpp When the e-dpp software and relevant drivers installation have been completed, you may run e-dpp. Plug the USB key or the Parallel Port Key (e-dpp Hardware License Key) to their respective ports. To run e-dpp, select "Start All Programs e-dpp 4.0.2" or click on the icon "e-dpp 4.0.2" on the desktop. Please refer to Chapter 2 Setup of the User Guide for the detailed instructions. Should you have any questions or comments on e-dpp or this guide, please feel free to contact the following access point: ELTECHS Engineering and Consulting Co., Ltd., Japan Tel No. +81 (47) 490-1010 Fax No. +81 (47) 490-1011 E-mail etap@eltechs.co.jp 12 of 12